The SMB2 Write packet contains data that is to be written
to a file or to a pipe. Depending on the client, there may
be padding between the header and the data field.
Currently, the length is validated only in the case padding
is present.
Since the DataOffset field always points to the beginning
of the data, there is no need to have a special case for
padding. By removing this, the length is validated in both
cases.
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The issue happens in a specific path in smb_check_perm_dacl(). When
"id" and "uid" have the same value, the function simply jumps out of
the loop without decrementing the reference count of the object
"posix_acls", which is increased by get_acl() earlier. This may
result in memory leaks.
Fix it by decreasing the reference count of "posix_acls" before
jumping to label "check_access_bits".
Fixes: 777cad1604 ("ksmbd: remove select FS_POSIX_ACL in Kconfig")
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When I refactored this Makefile, I accidentally changed the CONFIG
option.
Fixes: b52455a73d ("crypto: vmx - Align the short log with Makefile cleanups")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a wrapper that converts back from the folio to the page. This
entire file needs to be converted to use folios, but that's a
task for a different set of patches.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
I suspect this isn't actually needed and that releasepage will have
done the job, but convert it for now and we can delete it later.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
All but two of the callers already have a folio; pass a folio into
try_to_free_buffers(). This removes the last user of cancel_dirty_page()
so remove that wrapper function too.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Saves a few calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Also convert it to return a bool since it's called from release_folio().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Saves 671 bytes from an allmodconfig build (!)
Function old new delta
release_buffer_page 1617 946 -671
Total: Before=67656, After=66985, chg -0.99%
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
All users are now converted to release_folio
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Use folios throughout the release_folio path.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Use folios throughout the release_folio path.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Use folios throughout the release_folio path.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Use folios throughout the release_folio path.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
If we need a release_folio, we can add it back.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Use folios throughout the release_folio paths.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
The use of folios should be pushed further down into jfs from here.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Use a folio throughout hfsplus_release_folio().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Use a folio throughout gfs2_release_folio().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
While converting f2fs_release_page() to f2fs_release_folio(), cache the
sb_info so we don't need to retrieve it twice, and remove the redundant
call to set_page_private(). The use of folios should be pushed further
into f2fs from here.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
The use of folios should be pushed deeper into ext4 from here.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Use a folio in erofs_managed_cache_release_folio(), but use of folios
should be pushed into erofs_try_to_free_cached_page().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Use a folio throughout cifs_release_folio().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Use a folio throughout ceph_release_folio().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
I've only converted the outer layers of the btrfs release_folio paths
to use folios; the use of folios should be pushed further down into
btrfs from here.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
A straightforward conversion as they already work in terms of folios.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
A straightforward conversion as it already works in terms of folios.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Change all the filesystems which used iomap_releasepage to use the
new function.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
This replaces aops->releasepage. Update the documentation, and call it
if it exists.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
When running the stress-ng clone benchmark with multiple testing threads,
it was found that there were significant spinlock contention in sget_fc().
The contended spinlock was the sb_lock. It is under heavy contention
because the following code in the critcal section of sget_fc():
hlist_for_each_entry(old, &fc->fs_type->fs_supers, s_instances) {
if (test(old, fc))
goto share_extant_sb;
}
After testing with added instrumentation code, it was found that the
benchmark could generate thousands of ipc namespaces with the
corresponding number of entries in the mqueue's fs_supers list where the
namespaces are the key for the search. This leads to excessive time in
scanning the list for a match.
Looking back at the mqueue calling sequence leading to sget_fc():
mq_init_ns()
=> mq_create_mount()
=> fc_mount()
=> vfs_get_tree()
=> mqueue_get_tree()
=> get_tree_keyed()
=> vfs_get_super()
=> sget_fc()
Currently, mq_init_ns() is the only mqueue function that will indirectly
call mqueue_get_tree() with a newly allocated ipc namespace as the key for
searching. As a result, there will never be a match with the exising ipc
namespaces stored in the mqueue's fs_supers list.
So using get_tree_keyed() to do an existing ipc namespace search is just a
waste of time. Instead, we could use get_tree_nodev() to eliminate the
useless search. By doing so, we can greatly reduce the sb_lock hold time
and avoid the spinlock contention problem in case a large number of ipc
namespaces are present.
Of course, if the code is modified in the future to allow
mqueue_get_tree() to be called with an existing ipc namespace instead of a
new one, we will have to use get_tree_keyed() in this case.
The following stress-ng clone benchmark command was run on a 2-socket
48-core Intel system:
./stress-ng --clone 32 --verbose --oomable --metrics-brief -t 20
The "bogo ops/s" increased from 5948.45 before patch to 9137.06 after
patch. This is an increase of 54% in performance.
Link: https://lkml.kernel.org/r/20220121172315.19652-1-longman@redhat.com
Fixes: 935c6912b1 ("ipc: Convert mqueue fs to fs_context")
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
semtimedop() should be converted to use hrtimer like it has been done for
most of the system calls with timeouts. This system call already takes a
struct timespec as an argument and can therefore provide finer granularity
timed wait.
Link: https://lkml.kernel.org/r/1651187881-2858-1-git-send-email-prakash.sangappa@oracle.com
Signed-off-by: Prakash Sangappa <prakash.sangappa@oracle.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Get rid of redundant assignments which end up in values not being
read either because they are overwritten or the function ends.
Reported by clang-tidy [deadcode.DeadStores]
Link: https://lkml.kernel.org/r/20220409101933.207157-1-michalorzel.eng@gmail.com
Signed-off-by: Michal Orzel <michalorzel.eng@gmail.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add support for extraction of checksum-enabled "070702" cpio archives,
specified in Documentation/driver-api/early-userspace/buffer-format.rst.
Fail extraction if the calculated file data checksum doesn't match the
value carried in the header.
Link: https://lkml.kernel.org/r/20220404093429.27570-7-ddiss@suse.de
Signed-off-by: David Disseldorp <ddiss@suse.de>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Martin Wilck <mwilck@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Documentation/driver-api/early-userspace/buffer-format.rst includes the
specification for checksum-enabled cpio archives. Implement support for
this format in gen_init_cpio via a new '-c' parameter.
Link: https://lkml.kernel.org/r/20220404093429.27570-6-ddiss@suse.de
Signed-off-by: David Disseldorp <ddiss@suse.de>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Martin Wilck <mwilck@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When processing a "file" entry, gen_init_cpio attempts to allocate a
buffer large enough to stage the entire contents of the source file. It
then attempts to fill the buffer via a single read() call and subsequently
writes out the entire buffer length, without checking that read() returned
the full length, potentially writing uninitialized buffer memory.
Fix this by breaking up file I/O into 64k chunks and only writing the
length returned by the prior read() call.
Link: https://lkml.kernel.org/r/20220404093429.27570-5-ddiss@suse.de
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
initramfs cpio mtime preservation, as implemented in commit 889d51a107
("initramfs: add option to preserve mtime from initramfs cpio images"),
uses a linked list to defer directory mtime processing until after all
other items in the cpio archive have been processed. This is done to
ensure that parent directory mtimes aren't overwritten via subsequent
child creation.
The lkml link below indicates that the mtime retention use case was for
embedded devices with applications running exclusively out of initramfs,
where the 32-bit mtime value provided a rough file version identifier.
Linux distributions which discard an extracted initramfs immediately after
the root filesystem has been mounted may want to avoid the unnecessary
overhead.
This change adds a new INITRAMFS_PRESERVE_MTIME Kconfig option, which can
be used to disable on-by-default mtime retention and in turn speed up
initramfs extraction, particularly for cpio archives with large directory
counts.
Benchmarks with a one million directory cpio archive extracted 20 times
demonstrated:
mean extraction time (s) std dev
INITRAMFS_PRESERVE_MTIME=y 3.808 0.006
INITRAMFS_PRESERVE_MTIME unset 3.056 0.004
The above extraction times were measured using ftrace (initcall_finish -
initcall_start) values for populate_rootfs() with initramfs_async
disabled.
[ddiss@suse.de: rebase atop dir_entry.name flexible array member and drop separate initramfs_mtime.h header]
Link: https://lkml.org/lkml/2008/9/3/424
Link: https://lkml.kernel.org/r/20220404093429.27570-4-ddiss@suse.de
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
