This patch extends batch operations support for map-in-map map-types:
BPF_MAP_TYPE_HASH_OF_MAPS and BPF_MAP_TYPE_ARRAY_OF_MAPS
A usecase where outer HASH map holds hundred of VIP entries and its
associated reuse-ports per VIP stored in REUSEPORT_SOCKARRAY type
inner map, needs to do batch operation for performance gain.
This patch leverages the exiting generic functions for most of the batch
operations. As map-in-map's value contains the actual reference of the inner map,
for BPF_MAP_TYPE_HASH_OF_MAPS type, it needed an extra step to fetch the
map_id from the reference value.
selftests are added in next patch 2/2.
Signed-off-by: Takshak Chahande <ctakshak@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220510082221.2390540-1-ctakshak@fb.com
Add a flag needs_auxtrace_mmap to record whether an auxtrace mmap is
needed, in preparation for correctly determining whether or not an
auxtrace mmap is needed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20220506122601.367589-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add evsel as a parameter to ->idx() in preparation for correctly
determining whether an auxtrace mmap is needed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20220506122601.367589-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move ->idx() into mmap_per_evsel() in preparation for adding evsel as a
parameter.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20220506122601.367589-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove ->idx() per_cpu parameter because it isn't needed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20220506122601.367589-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The idx is with respect to evlist not evsel. That hasn't mattered because
they are the same at present. Prepare for that not being the case, which it
won't be when sideband tracking events are allowed on all CPUs even when
auxtrace is limited to selected CPUs.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20220506122601.367589-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
evlist__enable_event_idx() is used only by auxtrace. Move it to auxtrace.c
in preparation for making it even more auxtrace specific.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20220506122601.367589-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
evlist__enable_event_idx() is used only for auxtrace events which are never
system_wide. Simplify by using libperf enable event functions.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20220506122601.367589-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Like CMU_PERIC0, this provides clocks for USI06 ~ USI11 and USI_I2C.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20220504075154.58819-10-chanho61.park@samsung.com
CMU_PERIC0 provides clocks for USI0 ~ USI5 and USIx_I2C. USI0/1/2/3/4/5
have its own divider but USI_I2Cs share "dout_peric0_usi_i2c" divider.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220504075154.58819-9-chanho61.park@samsung.com
CMU_FSYS2 is responsible to control clocks of BLK_FSYS2 which includes
ufs and ethernet IPs. This patch adds some essential clocks to be
controlled by ethernet/ufs drivers instead of listing full clocks.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20220504075154.58819-8-chanho61.park@samsung.com
CMU_BUSMC is responsible to control clocks of BLK_BUSMC which represents
Data/Peri buses. Most clocks except PDMA/SPDMA are not necessary to
be controlled by HLOS. So, this adds PDMA/SPDMA gate clocks.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20220504075154.58819-7-chanho61.park@samsung.com
CMU_PERIS is responsible to control clocks of BLK_PERIS which has
OPT/MCT/WDT and TMU. This patch only supports WDT gate clocks and all
other clocks except WDT will be supported later.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20220504075154.58819-6-chanho61.park@samsung.com
Add CMU_CORE clock which represents Core BUS clocks. The source clocks
of this CMU block are oscclk or dout_clkcmu_core_bus. Thus, two source
clocks should be provided via device tree. All the gate clocks are
defined as CLK_IS_CRITICAL because they control(gate/ungate) core bus
clocks but not been assigned to any drivers.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20220504075154.58819-5-chanho61.park@samsung.com
This adds support for CMU_TOP which generates clocks for all the
function blocks such as CORE, FSYS0/1/2, PERIC0/1 and so on. For
CMU_TOP, PLL_SHARED0,1,2,3 and 4 will be the sources of this block
and they will generate bus clocks.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20220504075154.58819-4-chanho61.park@samsung.com
Add perf_evsel__enable_thread() as a counterpart to
perf_evsel__enable_cpu(), to enable all events for a thread.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20220506122601.367589-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A user told me that bpf_jit_enable can be disabled on one system, but he
failed to disable bpf_jit_enable on the other system:
# echo 0 > /proc/sys/net/core/bpf_jit_enable
bash: echo: write error: Invalid argument
No useful info is available through the dmesg log, a quick analysis shows
that the issue is related with CONFIG_BPF_JIT_ALWAYS_ON.
When CONFIG_BPF_JIT_ALWAYS_ON is enabled, bpf_jit_enable is permanently set
to 1 and setting any other value than that will return failure.
It is better to print some info to tell the user if disable bpf_jit_enable
failed.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/1652153703-22729-3-git-send-email-yangtiezhu@loongson.cn
With Grant taking a prominent role in Linaro, I will take over as the
process ambassador for ARM w.r.t. embargoed hardware issues.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Grant Likely <grant.likely@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variables vht_mcs and he_mcs are being initialized in the
start of for-loops however they are re-assigned new values in
the loop and not used outside the loop. The initializations
are redundant and can be removed.
Cleans up clang scan warnings:
warning: Although the value stored to 'vht_mcs' is used in the
enclosing expression, the value is never actually read from
'vht_mcs' [deadcode.DeadStores]
warning: Although the value stored to 'he_mcs' is used in the
enclosing expression, the value is never actually read from
'he_mcs' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220507184155.26939-1-colin.i.king@gmail.com
Ath11k allocates memory when firmware requests memory in QMI.
Coldboot calibration and firmware recovery uses firmware reload.
On firmware reload, firmware sends memory request again. If Ath11k
allocates memory on first firmware boot, reuse the available
memory. Also check if the segment type and size is same
on the next firmware boot. Reuse if segment type/size is
same as previous firmware boot else free the segment and
allocate the segment with size/type.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.6.0.1-00752-QCAHKSWPL_SILICONZ-1
Signed-off-by: Anilkumar Kolli <quic_akolli@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220506141448.10340-1-quic_akolli@quicinc.com
In case of Passpoint, the WLAN interface may be requested to
remain on a specific channel and then to send some management
frames on that channel. Now chanfreq of wmi_mgmt_send_cmd is set
as 0, as a result firmware may choose a default but wrong channel.
Fix it by assigning chanfreq field with the designated channel.
This change only applies to WCN6855 and QCA6390, other chips are
not affected.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220506013614.1580274-4-quic_bqiang@quicinc.com
Commit 66307ca040 ("ath11k: fix mgmt_tx_wmi cmd sent to FW for
deleted vdev") wants both of below two conditions are true before
sending management frames:
1: ar->allocated_vdev_map & (1LL << arvif->vdev_id)
2: arvif->is_started
Actually the second one is not necessary because with the first one
we can make sure the vdev is present.
Also use ar->conf_mutex to synchronize vdev delete and mgmt. TX.
This issue is found in case of Passpoint scenario where ath11k
needs to send action frames before vdev is started.
Fix it by removing the second condition.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Fixes: 66307ca040 ("ath11k: fix mgmt_tx_wmi cmd sent to FW for deleted vdev")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220506013614.1580274-3-quic_bqiang@quicinc.com
Add remain on channel support, it is needed in several
scenarios such as Passpoint etc.
Currently this is supported by QCA6390, WCN6855, IPQ8074,
IPQ6018 and QCN9074.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220506013614.1580274-2-quic_bqiang@quicinc.com
With WoWLAN enabled and after sleeping for a rather long time,
we are seeing that with some APs, it is not able to wake up
the STA though the correct wake up pattern has been configured.
This is because the host doesn't send keepalive command to
firmware, thus firmware will not send any packet to the AP and
after a specific time the AP kicks out the STA.
Fix this issue by enabling keepalive before going to suspend
and disabling it after resume back.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220506012540.1579604-1-quic_bqiang@quicinc.com
James, Mike and Leo have been doing all the reviews and development work
for the Coresight perf tools for a couple of years now. As such remove
my name and add James and Mike as official reviewers (Leo is already
listed as such).
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The antient ISA wavefront driver reads its sample patch data (uploaded
over an ioctl) via __get_user() with no good reason; likely just for
some performance optimizations in the past. Let's change this to the
standard get_user() and the error check for handling the fault case
properly.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220510103626.16635-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The &chip->gdev->ei[] array has chip->nlines elements so this >
comparison needs to be >= to prevent an out of bounds access. The
gdev->ei[] array is allocated in hte_register_chip().
Fixes: 31ab09b421 ("drivers: Add hardware timestamp engine (HTE) subsystem")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dipen Patel <dipenp@nvidia.com>
Acked-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
del_timer() does not wait until the timer handler finishing.
This means that the timer handler may still be running after
the driver's remove function has finished, which would result
in a use-after-free.
Fix it by calling del_timer_sync(), which makes sure the timer
handler has finished.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Dipen Patel <dipenp@nvidia.com>
Acked-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Remove a couple of unnecessary casts to `(void *)` when initializing the
`.data` members in the device ID table.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20220510115141.212779-3-abbotti@mev.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
On i.MX8Plus there are two updates for micfil module.
One is that the output format is S32_LE, only the 24 more
significative bits have information, the other bits are always
zero. Add 'formats' variable in soc data to distinguish the
format on different platform.
Another is that the fifo depth is 32 entries.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1652087663-1908-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The host stream position is updated when no_stream_position is set as 0.
However current implementation updates host stream position only when
report data is larger than or equal to host period size which is decided
by the period size of host side. It maybe cause host stream position
update not in time. Therefore this patch introduces another field
"cont_update_posn", a boolean value aimed to update host stream position
continuously and based on period size of pipeline. It can get better
precise when need to update host stream position from firmware.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: YC Hung <yc.hung@mediatek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220509170425.54640-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable capture stream of the cs35l41 dai link to support feedback
stream from amplifier.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220509170922.54868-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF topology supports 2 BE Links(dmic01 and dmic16k) and each
link supports up to four DMICs. However, Chromebook does not implement
ACPI NHLT table so the mach->mach_params.dmic_num is always zero. We
add a quirk so machine driver knows it's running on a Chromebook and
need to create BE Links for DMIC.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220509170922.54868-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds the driver data for two rt1019 speaker amplifiers on
SSP1 and rt5682s on SSP0 for ADL platform
Reviewed-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Vamshi Krishna <vamshi.krishna.gopal@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220509170922.54868-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Expose mlx5_sriov_blocking_notifier_register / unregister APIs to let a
VF register to be notified for its enablement / disablement by the PF.
Upon VF probe it will call mlx5_sriov_blocking_notifier_register() with
its notifier block and upon VF remove it will call
mlx5_sriov_blocking_notifier_unregister() to drop its registration.
This can give a VF the ability to clean some resources upon disable
before that the command interface goes down and on the other hand sets
some stuff before that it's enabled.
This may be used by a VF which is migration capable in few cases.(e.g.
PF load/unload upon an health recovery).
Link: https://lore.kernel.org/r/20220510090206.90374-2-yishaih@nvidia.com
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Just leave the SPDX marker and the copyright notice and remove the
irrelevant rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220419063303.583106-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove the irrelevant changelogs and todo notes and just leave the SPDX
marker and the copyright notice.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220419063303.583106-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The copyright statement says:
"Redistribution of this file is permitted under the GNU General Public
License." and was added by Ted in 1993, at which point GPLv2 only
was the default Linux license.
Replace it with the usual GPLv2 only SPDX header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220419063303.583106-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge loop.h into loop.c as all the content is only used there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220419063303.583106-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The ops are already part of the 'struct sdw_driver', it's unclear why
this was copied into the 'slave' structure - no other driver does so.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220509185729.59884-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
udf_write_fi() uses lengthOfImpUse of the entry it is writing to.
However this field has not yet been initialized so it either contains
completely bogus value or value from last directory entry at that place.
In either case this is wrong and can lead to filesystem corruption or
kernel crashes.
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
CC: stable@vger.kernel.org
Fixes: 979a6e28dd ("udf: Get rid of 0-length arrays in struct fileIdentDesc")
Signed-off-by: Jan Kara <jack@suse.cz>
Make sure to check the pmu type first and then check event->attr.disabled.
Doing so would avoid reading the disabled attribute of an event that is
not handled by TAD PMU.
Signed-off-by: Tanmay Jagdale <tanmay@marvell.com>
Link: https://lore.kernel.org/r/20220510102657.487539-1-tanmay@marvell.com
Signed-off-by: Will Deacon <will@kernel.org>
