The automatic "save & restore" of interrupt context is a POWER10/XIVE2
feature exploited by KVM under the PowerNV platform. It is not
available under pSeries and the associated toggle should not be
exposed under the XIVE debugfs directory.
Introduce a platform handler for debugfs initialization and move the
'save-restore' entry under the native (PowerNV) backend to fix compile
when !CONFIG_PPC_POWERNV.
Fixes: 1e7684dc4f ("powerpc/xive: Add a debugfs toggle for save-restore")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211201165418.1041842-1-clg@kaod.org
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.
Add a struct_group() for the spe registers so that memset() can correctly reason
about the size:
In function 'fortify_memset_chk',
inlined from 'restore_user_regs.part.0' at arch/powerpc/kernel/signal_32.c:539:3:
>> include/linux/fortify-string.h:195:4: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
195 | __write_overflow_field();
| ^~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211118203604.1288379-1-keescook@chromium.org
================================================================================
UBSAN: shift-out-of-bounds in arch/powerpc/mm/kasan/book3s_32.c:22:23
shift exponent -1 is negative
CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.5-gentoo-PowerMacG4 #9
Call Trace:
[c214be60] [c0ba0048] dump_stack_lvl+0x80/0xb0 (unreliable)
[c214be80] [c0b99288] ubsan_epilogue+0x10/0x5c
[c214be90] [c0b98fe0] __ubsan_handle_shift_out_of_bounds+0x94/0x138
[c214bf00] [c1c0f010] kasan_init_region+0xd8/0x26c
[c214bf30] [c1c0ed84] kasan_init+0xc0/0x198
[c214bf70] [c1c08024] setup_arch+0x18/0x54c
[c214bfc0] [c1c037f0] start_kernel+0x90/0x33c
[c214bff0] [00003610] 0x3610
================================================================================
This happens when the directly mapped memory is a power of 2.
Fix it by checking the shift and set the result to 0 when shift is -1
Fixes: 7974c47326 ("powerpc/32s: Implement dedicated kasan_init_region()")
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215169
Link: https://lore.kernel.org/r/15cbc3439d4ad988b225e2119ec99502a5cc6ad3.1638261744.git.christophe.leroy@csgroup.eu
module_alloc() first tries to allocate module text within 24 bits direct
jump from kernel text, and tries a wider allocation if first one fails.
When first allocation fails the following is observed in kernel logs:
vmap allocation for size 2400256 failed: use vmalloc=<size> to increase size
systemd-udevd: vmalloc error: size 2395133, vm_struct allocation failed, mode:0xcc0(GFP_KERNEL), nodemask=(null)
CPU: 0 PID: 127 Comm: systemd-udevd Tainted: G W 5.15.5-gentoo-PowerMacG4 #9
Call Trace:
[e2a53a50] [c0ba0048] dump_stack_lvl+0x80/0xb0 (unreliable)
[e2a53a70] [c0540128] warn_alloc+0x11c/0x2b4
[e2a53b50] [c0531be8] __vmalloc_node_range+0xd8/0x64c
[e2a53c10] [c00338c0] module_alloc+0xa0/0xac
[e2a53c40] [c027a368] load_module+0x2ae0/0x8148
[e2a53e30] [c027fc78] sys_finit_module+0xfc/0x130
[e2a53f30] [c0035098] ret_from_syscall+0x0/0x28
...
Add __GFP_NOWARN flag to first allocation so that no warning appears
when it fails.
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Fixes: 2ec13df167 ("powerpc/modules: Load modules closer to kernel text")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/93c9b84d6ec76aaf7b4f03468e22433a6d308674.1638267035.git.christophe.leroy@csgroup.eu
Allow the LPID bit width and partition table size to be set at runtime
from the device tree.
Move the PID bit width detection into the same place.
KVM does not support using the extra bits yet, this is mainly required
to get the PTCR register values correct (so KVM will run but it will
not allocate > 4096 LPIDs).
OPAL firmware provides this property for POWER10 CPUs since skiboot
commit 9b85f7d961f2 ("hdata: add mmu-pid-bits and mmu-lpid-bits for
POWER10 CPUs").
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211129030915.1888332-1-npiggin@gmail.com
Running perf fuzzer showed below in dmesg logs:
"Can't find PMC that caused IRQ"
This means a PMU exception happened, but none of the PMC's (Performance
Monitor Counter) were found to be overflown. There are some corner cases
that clears the PMCs after PMI gets masked. In such cases, the perf
interrupt handler will not find the active PMC values that had caused
the overflow and thus leads to this message while replaying.
Case 1: PMU Interrupt happens during replay of other interrupts and
counter values gets cleared by PMU callbacks before replay:
During replay of interrupts like timer, __do_irq() and doorbell
exception, we conditionally enable interrupts via may_hard_irq_enable().
This could potentially create a window to generate a PMI. Since irq soft
mask is set to ALL_DISABLED, the PMI will get masked here. We could get
IPIs run before perf interrupt is replayed and the PMU events could
be deleted or stopped. This will change the PMU SPR values and resets
the counters. Snippet of ftrace log showing PMU callbacks invoked in
__do_irq():
<idle>-0 [051] dns. 132025441306354: __do_irq <-call_do_irq
<idle>-0 [051] dns. 132025441306430: irq_enter <-__do_irq
<idle>-0 [051] dns. 132025441306503: irq_enter_rcu <-__do_irq
<idle>-0 [051] dnH. 132025441306599: xive_get_irq <-__do_irq
<<>>
<idle>-0 [051] dnH. 132025441307770: generic_smp_call_function_single_interrupt <-smp_ipi_demux_relaxed
<idle>-0 [051] dnH. 132025441307839: flush_smp_call_function_queue <-smp_ipi_demux_relaxed
<idle>-0 [051] dnH. 132025441308057: _raw_spin_lock <-event_function
<idle>-0 [051] dnH. 132025441308206: power_pmu_disable <-perf_pmu_disable
<idle>-0 [051] dnH. 132025441308337: power_pmu_del <-event_sched_out
<idle>-0 [051] dnH. 132025441308407: power_pmu_read <-power_pmu_del
<idle>-0 [051] dnH. 132025441308477: read_pmc <-power_pmu_read
<idle>-0 [051] dnH. 132025441308590: isa207_disable_pmc <-power_pmu_del
<idle>-0 [051] dnH. 132025441308663: write_pmc <-power_pmu_del
<idle>-0 [051] dnH. 132025441308787: power_pmu_event_idx <-perf_event_update_userpage
<idle>-0 [051] dnH. 132025441308859: rcu_read_unlock_strict <-perf_event_update_userpage
<idle>-0 [051] dnH. 132025441308975: power_pmu_enable <-perf_pmu_enable
<<>>
<idle>-0 [051] dnH. 132025441311108: irq_exit <-__do_irq
<idle>-0 [051] dns. 132025441311319: performance_monitor_exception <-replay_soft_interrupts
Case 2: PMI's masked during local_* operations, example local_add(). If
the local_add() operation happens within a local_irq_save(), replay of
PMI will be during local_irq_restore(). Similar to case 1, this could
also create a window before replay where PMU events gets deleted or
stopped.
Fix it by updating the PMU callback function power_pmu_disable() to
check for pending perf interrupt. If there is an overflown PMC and
pending perf interrupt indicated in paca, clear the PMI bit in paca to
drop that sample. Clearing of PMI bit is done in power_pmu_disable()
since disable is invoked before any event gets deleted/stopped. With
this fix, if there are more than one event running in the PMU, there is
a chance that we clear the PMI bit for the event which is not getting
deleted/stopped. The other events may still remain active. Hence to make
sure we don't drop valid sample in such cases, another check is added in
power_pmu_enable. This checks if there is an overflown PMC found among
the active events and if so enable back the PMI bit. Two new helper
functions are introduced to clear/set the PMI, ie
clear_pmi_irq_pending() and set_pmi_irq_pending(). Helper function
pmi_irq_pending() is introduced to give a warning if there is pending
PMI bit in paca, but no PMC is overflown.
Also there are corner cases which result in performance monitor
interrupts being triggered during power_pmu_disable(). This happens
since PMXE bit is not cleared along with disabling of other MMCR0 bits
in the pmu_disable. Such PMI's could leave the PMU running and could
trigger PMI again which will set MMCR0 PMAO bit. This could lead to
spurious interrupts in some corner cases. Example, a timer after
power_pmu_del() which will re-enable interrupts and triggers a PMI again
since PMAO bit is still set. But fails to find valid overflow since PMC
was cleared in power_pmu_del(). Fix that by disabling PMXE along with
disabling of other MMCR0 bits in power_pmu_disable().
We can't just replay PMI any time. Hence this approach is preferred
rather than replaying PMI before resetting overflown PMC. Patch also
documents core-book3s on a race condition which can trigger these PMC
messages during idle path in PowerNV.
Fixes: f442d00480 ("powerpc/64s: Add support to mask perf interrupts and replay them")
Reported-by: Nageswara R Sastry <nasastry@in.ibm.com>
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Suggested-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Make pmi_irq_pending() return bool, reflow/reword some comments]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1626846509-1350-2-git-send-email-atrajeev@linux.vnet.ibm.com
Now that atomic_add() and atomic_sub() handle immediate operands,
atomic_inc() and atomic_dec() have no added value compared to the
generic fallback which calls atomic_add(1) and atomic_sub(1).
Also remove atomic_inc_not_zero() which fallsback to
atomic_add_unless() which itself fallsback to
atomic_fetch_add_unless() which now handles immediate operands.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0bc64a2f18726055093dbb2e479cefc60a409cfd.1632236981.git.christophe.leroy@csgroup.eu
Today we get the following code generation for bitops like
set or clear bit:
c0009fe0: 39 40 08 00 li r10,2048
c0009fe4: 7c e0 40 28 lwarx r7,0,r8
c0009fe8: 7c e7 53 78 or r7,r7,r10
c0009fec: 7c e0 41 2d stwcx. r7,0,r8
c000d568: 39 00 18 00 li r8,6144
c000d56c: 7c c0 38 28 lwarx r6,0,r7
c000d570: 7c c6 40 78 andc r6,r6,r8
c000d574: 7c c0 39 2d stwcx. r6,0,r7
Most set bits are constant on lower 16 bits, so it can easily
be replaced by the "immediate" version of the operation. Allow
GCC to choose between the normal or immediate form.
For clear bits, on 32 bits 'rlwinm' can be used instead of 'andc' for
when all bits to be cleared are consecutive.
On 64 bits we don't have any equivalent single operation for clearing,
single bits or a few bits, we'd need two 'rldicl' so it is not
worth it, the li/andc sequence is doing the same.
With this patch we get:
c0009fe0: 7d 00 50 28 lwarx r8,0,r10
c0009fe4: 61 08 08 00 ori r8,r8,2048
c0009fe8: 7d 00 51 2d stwcx. r8,0,r10
c000d558: 7c e0 40 28 lwarx r7,0,r8
c000d55c: 54 e7 05 64 rlwinm r7,r7,0,21,18
c000d560: 7c e0 41 2d stwcx. r7,0,r8
On pmac32_defconfig, it reduces the text by approx 10 kbytes.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e6f815d9181bab09df3b350af51149437863e9f9.1632236981.git.christophe.leroy@csgroup.eu
Introduce macros that operate on a (start, end) range of GPRs, which
reduces lines of code and need to do mental arithmetic while reading the
code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211022061322.2671178-1-npiggin@gmail.com
The printk layer at the moment does not seem to have a good way to force
flush printk messages that are created in NMI context, except in the
panic path.
NMI-context printk messages normally get to the console with irq_work,
but that won't help if the CPU is stuck with irqs disabled, as can be
the case for hard lockup watchdog messages.
The watchdog currently flushes the printk buffers after detecting a
lockup on remote CPUs, but they may not have processed their NMI IPI
yet by that stage, or they may have self-detected a lockup in which
case they won't go via this NMI IPI path.
Improve the situation by having NMI-context mark a flag if it called
printk, and have watchdog timer interrupts check if that flag was set
and try to flush if it was. Latency is not a big problem because we
were already stuck for a while, just need to try to make sure the
messages eventually make it out.
Depends-on: 5d5e4522a7 ("printk: restore flushing of NMI buffers on remote CPUs after NMI backtraces")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211119113146.752759-6-npiggin@gmail.com
We have wrong units on BAT's sizes (G instead of M, M instead of ...)
---[ Instruction Block Address Translation ]---
0: 0xc0000000-0xc03fffff 0x00000000 4G Kernel x m
1: 0xc0400000-0xc05fffff 0x00400000 2G Kernel x m
2: 0xc0600000-0xc06fffff 0x00600000 1G Kernel x m
3: 0xc0700000-0xc077ffff 0x00700000 512M Kernel x m
4: 0xc0780000-0xc079ffff 0x00780000 128M Kernel x m
5: 0xc07a0000-0xc07bffff 0x007a0000 128M Kernel x m
6: -
7: -
This is because pt_dump_size() expects a size in Kbytes but
bat_show_603() gives the size in bytes.
To avoid risk of confusion, change pt_dump_size() to take bytes.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f16c30f5c9185a63335322cf1a8b22f189d335ef.1637922595.git.christophe.leroy@csgroup.eu
Unlike PPC64, PPC32 doesn't require any special compiler option
to get _mcount() call not clobbering registers.
Provide ftrace_regs_caller() and ftrace_regs_call() and activate
HAVE_DYNAMIC_FTRACE_WITH_REGS.
That's heavily copied from ftrace_64_mprofile.S
For the time being leave livepatching aside, it will come with
following patch.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1862dc7719855cc2a4eec80920d94c955877557e.1635423081.git.christophe.leroy@csgroup.eu
All functions calling _mcount do it exactly the same way, with the
following sequence of instructions:
c07de788: 7c 08 02 a6 mflr r0
c07de78c: 90 01 00 04 stw r0,4(r1)
c07de790: 4b 84 13 65 bl c001faf4 <_mcount>
Allthough LR is pushed on stack, it is still in r0 while entering
_mcount().
Function arguments are in r3-r10, so r11 and r12 are still available
at that point.
Do like PPC64 and use r12 to move LR into CTR, so that r0 is preserved
and doesn't need to be restored from the stack.
While at it, bring back the EXPORT_SYMBOL at the end of _mcount.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/24a3ba7db388537c44a038026f926d885372e6d3.1635423081.git.christophe.leroy@csgroup.eu
Prior to commit b1923caa6e ("powerpc: Merge 32-bit and 64-bit
setup_arch()") probe_machine() was called from setup_32/64.c and lived
in setup-common.c. But now it's only called from setup-common.c so it
can be static and __init, and we don't need the declaration in
machdep.h either.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211124093254.1054750-6-mpe@ellerman.id.au
setup_profiling_timer() is only needed when CONFIG_PROFILING is enabled.
Fixes the following W=1 warning when CONFIG_PROFILING=n:
linux/arch/powerpc/kernel/smp.c:1638:5: error: no previous prototype for ‘setup_profiling_timer’
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211124093254.1054750-5-mpe@ellerman.id.au
Building with W=1 we see a warning:
linux/arch/powerpc/mm/nohash/fsl_book3e.c:63:15: error: no previous prototype for ‘tlbcam_sz’
tlbcam_sz() is not used outside this file, so we can make it static.
However it's only used inside #ifdef CONFIG_PPC32, so move it within
that ifdef, otherwise we would get a defined but not used error.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211124093254.1054750-4-mpe@ellerman.id.au
Fixes the following W=1 warning:
arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c:89:12: warning: no previous prototype for 'mpc85xx_setup_pmc'
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211124093254.1054750-1-mpe@ellerman.id.au
Some core kernel code starts to go beyond the 2048 byte stack size
warning at NR_CPUS=8192, so select CPUMASK_OFFSTACK in that case.
x86 does similarly for very large NR_CPUS.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211105035042.1398309-2-npiggin@gmail.com
This function builds the cores online map with on-stack cpumasks which
can cause high stack usage with large NR_CPUS.
It is not used in any performance sensitive paths, so instead just check
for first thread sibling.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211105035042.1398309-1-npiggin@gmail.com
wd_smp_last_reset_tb now gets reset by watchdog_smp_panic() as part of
marking CPUs stuck and removing them from the pending mask before it
begins any printing. This causes last reset times reported to be off.
Fix this by reading it into a local variable before it gets reset.
Fixes: 76521c4b02 ("powerpc/watchdog: Avoid holding wd_smp_lock over printk and smp_send_nmi_ipi")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211125103346.1188958-1-npiggin@gmail.com
Make microwatt_get_random_darn() static, because it can be.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211118004415.1706863-1-mpe@ellerman.id.au
When taking watchdog actions, printing messages, comparing and
re-setting wd_smp_last_reset_tb, etc., read TB close to the point of use
and under wd_smp_lock or printing lock (if applicable).
This should keep timebase mostly monotonic with kernel log messages, and
could prevent (in theory) a laggy CPU updating wd_smp_last_reset_tb to
something a long way in the past, and causing other CPUs to appear to be
stuck.
These additional TB reads are all slowpath (lockup has been detected),
so performance does not matter.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211110025056.2084347-5-npiggin@gmail.com
There is a deadlock with the console_owner lock and the wd_smp_lock:
CPU x takes the console_owner lock
CPU y takes a watchdog timer interrupt and takes __wd_smp_lock
CPU x takes a soft-NMI interrupt, detects deadlock, spins on __wd_smp_lock
CPU y detects deadlock, tries to print something and spins on console_owner
-> deadlock
Change the watchdog locking scheme so wd_smp_lock protects the watchdog
internal data, but "reporting" (printing, issuing NMI IPIs, taking any
action outside of watchdog) uses a non-waiting exclusion. If a CPU detects
a problem but can not take the reporting lock, it just returns because
something else is already reporting. It will try again at some point.
Typically hard lockup watchdog report usefulness is not impacted due to
failure to spewing a large enough amount of data in as short a time as
possible, but by messages getting garbled.
Laurent debugged this and found the deadlock, and this patch is based on
his general approach to avoid expensive operations while holding the lock.
With the addition of the reporting exclusion.
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
[np: rework to add reporting exclusion update changelog]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211110025056.2084347-4-npiggin@gmail.com
Most updates to wd_smp_cpus_pending are under lock except the watchdog
interrupt bit clear.
This can race with non-atomic RMW updates to the mask under lock, which
can happen in two instances:
Firstly, if another CPU detects this one is stuck, removes it from the
mask, mask becomes empty and is re-filled with non-atomic stores. This
is okay because it would re-fill the mask with this CPU's bit clear
anyway (because this CPU is now stuck), so it doesn't matter that the
bit clear update got "lost". Add a comment for this.
Secondly, if another CPU detects a different CPU is stuck and removes it
from the pending mask with a non-atomic store to bytes which also
include the bit of this CPU. This case can result in the bit clear being
lost and the end result being the bit is set. This should be so rare it
hardly matters, but to make things simpler to reason about just avoid
the non-atomic access for that case.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211110025056.2084347-3-npiggin@gmail.com
It is possible for all CPUs to miss the pending cpumask becoming clear,
and then nobody resetting it, which will cause the lockup detector to
stop working. It will eventually expire, but watchdog_smp_panic will
avoid doing anything if the pending mask is clear and it will never be
reset.
Order the cpumask clear vs the subsequent test to close this race.
Add an extra check for an empty pending mask when the watchdog fires and
finds its bit still clear, to try to catch any other possible races or
bugs here and keep the watchdog working. The extra test in
arch_touch_nmi_watchdog is required to prevent the new warning from
firing off.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Debugged-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211110025056.2084347-2-npiggin@gmail.com
Provide API documentation for rtas_busy_delay_time(), explaining why we
return the same value for 9900 and -2.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211117060259.957178-3-nathanl@linux.ibm.com
Generally RTAS cannot block, and in PAPR it is required to return control
to the OS within a few tens of microseconds. In order to support operations
which may take longer to complete, many RTAS primitives can return
intermediate -2 ("busy") or 990x ("extended delay") values, which indicate
that the OS should reattempt the same call with the same arguments at some
point in the future.
Current versions of PAPR are less than clear about this, but the intended
meanings of these values in more detail are:
RTAS_BUSY (-2): RTAS has suspended a potentially long-running operation in
order to meet its latency obligation and give the OS the opportunity to
perform other work. RTAS can resume making progress as soon as the OS
reattempts the call.
RTAS_EXTENDED_DELAY_{MIN...MAX} (9900-9905): RTAS must wait for an external
event to occur or for internal contention to resolve before it can complete
the requested operation. The value encodes a non-binding hint as to roughly
how long the OS should wait before calling again, but the OS is allowed to
reattempt the call sooner or even immediately.
Linux of course must take its own CPU scheduling obligations into account
when handling these statuses; e.g. a task which receives an RTAS_BUSY
status should check whether to reschedule before it attempts the RTAS call
again to avoid starving other tasks.
rtas_busy_delay() is a helper function that "consumes" a busy or extended
delay status. Common usage:
int rc;
do {
rc = rtas_call(rtas_token("some-function"), ...);
} while (rtas_busy_delay(rc));
/* convert rc to Linux error value, etc */
If rc is a busy or extended delay status, the caller can rely on
rtas_busy_delay() to perform an appropriate sleep or reschedule and return
nonzero. Other statuses are handled normally by the caller.
The current implementation of rtas_busy_delay() both oversleeps and
overuses the CPU:
* It performs msleep() for all 990x and even when no delay is
suggested (-2), but this is understood to actually sleep for two jiffies
minimum in practice (20ms with HZ=100). 9900 (1ms) and 9901 (10ms)
appear to be the most common extended delay statuses, and the
oversleeping measurably lengthens DLPAR operations, which perform
many RTAS calls.
* It does not sleep on 990x unless need_resched() is true, causing code
like the loop above to needlessly retry, wasting CPU time.
Alter the logic to align better with the intended meanings:
* When passed RTAS_BUSY, perform cond_resched() and return without
sleeping. The caller should reattempt immediately
* Always sleep when passed an extended delay status, using usleep_range()
for precise shorter sleeps. Limit the sleep time to one second even
though there are higher architected values.
Change rtas_busy_delay()'s return type to bool to better reflect its usage,
and add kernel-doc.
rtas_busy_delay_time() is unchanged, even though it "incorrectly" returns 1
for RTAS_BUSY. There are users of that API with open-coded delay loops in
sensitive contexts that will have to be taken on an individual basis.
Brief results for addition and removal of 5GB memory on a small P9 PowerVM
partition follow. Load was generated with stress-ng --cpu N. For add,
elapsed time is greatly reduced without significant change in the number of
RTAS calls or time spent on CPU. For remove, elapsed time is modestly
reduced, with significant reductions in RTAS calls and time spent on CPU.
With no competing workload (- before, + after):
Performance counter stats for 'bash -c echo "memory add count 20" > /sys/kernel/dlpar' (10 runs):
- 1,935 probe:rtas_call # 0.003 M/sec ( +- 0.22% )
- 609.99 msec task-clock # 0.183 CPUs utilized ( +- 0.19% )
+ 1,956 probe:rtas_call # 0.003 M/sec ( +- 0.17% )
+ 618.56 msec task-clock # 0.278 CPUs utilized ( +- 0.11% )
- 3.3322 +- 0.0670 seconds time elapsed ( +- 2.01% )
+ 2.2222 +- 0.0416 seconds time elapsed ( +- 1.87% )
Performance counter stats for 'bash -c echo "memory remove count 20" > /sys/kernel/dlpar' (10 runs):
- 6,224 probe:rtas_call # 0.008 M/sec ( +- 2.57% )
- 750.36 msec task-clock # 0.190 CPUs utilized ( +- 2.01% )
+ 843 probe:rtas_call # 0.003 M/sec ( +- 0.12% )
+ 250.66 msec task-clock # 0.068 CPUs utilized ( +- 0.17% )
- 3.9394 +- 0.0890 seconds time elapsed ( +- 2.26% )
+ 3.678 +- 0.113 seconds time elapsed ( +- 3.07% )
With all CPUs 100% busy (- before, + after):
Performance counter stats for 'bash -c echo "memory add count 20" > /sys/kernel/dlpar' (10 runs):
- 2,979 probe:rtas_call # 0.003 M/sec ( +- 0.12% )
- 1,096.62 msec task-clock # 0.105 CPUs utilized ( +- 0.10% )
+ 2,981 probe:rtas_call # 0.003 M/sec ( +- 0.22% )
+ 1,095.26 msec task-clock # 0.154 CPUs utilized ( +- 0.21% )
- 10.476 +- 0.104 seconds time elapsed ( +- 1.00% )
+ 7.1124 +- 0.0865 seconds time elapsed ( +- 1.22% )
Performance counter stats for 'bash -c echo "memory remove count 20" > /sys/kernel/dlpar' (10 runs):
- 2,702 probe:rtas_call # 0.004 M/sec ( +- 4.00% )
- 722.71 msec task-clock # 0.067 CPUs utilized ( +- 2.41% )
+ 1,246 probe:rtas_call # 0.003 M/sec ( +- 0.25% )
+ 487.73 msec task-clock # 0.049 CPUs utilized ( +- 0.20% )
- 10.829 +- 0.163 seconds time elapsed ( +- 1.51% )
+ 9.9887 +- 0.0866 seconds time elapsed ( +- 0.87% )
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211117060259.957178-2-nathanl@linux.ibm.com
Remove the pseries scanlog driver.
This code supports functions from Power4-era servers that are not present
on targets currently supported by arch/powerpc. System manuals from this
time have this description:
Scan Dump data is a set of chip data that the service processor gathers
after a system malfunction. It consists of chip scan rings, chip trace
arrays, and Scan COM (SCOM) registers. This data is stored in the
scan-log partition of the system’s Nonvolatile Random Access
Memory (NVRAM).
PowerVM partition firmware development doesn't recognize the associated
function call or property, and they don't see any references to them in
their codebase. It seems to have been specific to non-virtualized pseries.
References:
Historical Linux commit from February 2003 (interesting to note this seems
to be the source of non-GPL exports for rtas_call etc):
https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=f92e361842d5251e50562b09664082dcbd0548bb
IntelliStation and pSeries docs which refer to the feature:
http://ps-2.retropc.se/basil.holloway/ALL%20PDF/380635.pdfhttp://ps-2.kev009.com/rs6000/manuals/p/p615-6C3-6E3/6C3_and_6E3_Users_Guide_SA38-0629.pdf
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210920173203.1800475-1-nathanl@linux.ibm.com
Fix the following issues reported by kernel-doc:
$ scripts/kernel-doc -v -none arch/powerpc/kernel/rtas.c
arch/powerpc/kernel/rtas.c:810: info: Scanning doc for function rtas_activate_firmware
arch/powerpc/kernel/rtas.c:818: warning: contents before sections
arch/powerpc/kernel/rtas.c:841: info: Scanning doc for function rtas_call_reentrant
arch/powerpc/kernel/rtas.c:893: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Find a specific pseries error log in an RTAS extended event log.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211116215806.928235-1-nathanl@linux.ibm.com
Today, patch_instruction() assumes that it is called exclusively on
valid addresses, and only checks that it is not called on an init
address after init section has been freed.
Improve verification by calling kernel_text_address() instead.
kernel_text_address() already includes a verification of
initmem release.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bc683d499a411730504b132a924de0ccc2ef1f79.1636971137.git.christophe.leroy@csgroup.eu
With KUAP enabled, any kernel code which wants to access userspace
needs to be surrounded by disable-enable KUAP. But that is not
happening for BPF_PROBE_MEM load instruction. Though PPC32 does not
support read protection, considering the fact that PTR_TO_BTF_ID
(which uses BPF_PROBE_MEM mode) could either be a valid kernel pointer
or NULL but should never be a pointer to userspace address, execute
BPF_PROBE_MEM load only if addr is kernel address, otherwise set
dst_reg=0 and move on.
This will catch NULL, valid or invalid userspace pointers. Only bad
kernel pointer will be handled by BPF exception table.
[Alexei suggested for x86]
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211012123056.485795-9-hbathini@linux.ibm.com
BPF load instruction with BPF_PROBE_MEM mode can cause a fault
inside kernel. Append exception table for such instructions
within BPF program.
Unlike other archs which uses extable 'fixup' field to pass dest_reg
and nip, BPF exception table on PowerPC follows the generic PowerPC
exception table design, where it populates both fixup and extable
sections within BPF program. fixup section contains 3 instructions,
first 2 instructions clear dest_reg (lower & higher 32-bit registers)
and last instruction jumps to next instruction in the BPF code.
extable 'insn' field contains relative offset of the instruction and
'fixup' field contains relative offset of the fixup entry. Example
layout of BPF program with extable present:
+------------------+
| |
| |
0x4020 -->| lwz r28,4(r4) |
| |
| |
0x40ac -->| lwz r3,0(r24) |
| lwz r4,4(r24) |
| |
| |
|------------------|
0x4278 -->| li r28,0 | \
| li r27,0 | | fixup entry
| b 0x4024 | /
0x4284 -->| li r4,0 |
| li r3,0 |
| b 0x40b4 |
|------------------|
0x4290 -->| insn=0xfffffd90 | \ extable entry
| fixup=0xffffffe4 | /
0x4298 -->| insn=0xfffffe14 |
| fixup=0xffffffe8 |
+------------------+
(Addresses shown here are chosen random, not real)
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211012123056.485795-8-hbathini@linux.ibm.com
On PPC64 with KUAP enabled, any kernel code which wants to
access userspace needs to be surrounded by disable-enable KUAP.
But that is not happening for BPF_PROBE_MEM load instruction.
So, when BPF program tries to access invalid userspace address,
page-fault handler considers it as bad KUAP fault:
Kernel attempted to read user page (d0000000) - exploit attempt? (uid: 0)
Considering the fact that PTR_TO_BTF_ID (which uses BPF_PROBE_MEM
mode) could either be a valid kernel pointer or NULL but should
never be a pointer to userspace address, execute BPF_PROBE_MEM load
only if addr is kernel address, otherwise set dst_reg=0 and move on.
This will catch NULL, valid or invalid userspace pointers. Only bad
kernel pointer will be handled by BPF exception table.
[Alexei suggested for x86]
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211012123056.485795-7-hbathini@linux.ibm.com
BPF load instruction with BPF_PROBE_MEM mode can cause a fault
inside kernel. Append exception table for such instructions
within BPF program.
Unlike other archs which uses extable 'fixup' field to pass dest_reg
and nip, BPF exception table on PowerPC follows the generic PowerPC
exception table design, where it populates both fixup and extable
sections within BPF program. fixup section contains two instructions,
first instruction clears dest_reg and 2nd jumps to next instruction
in the BPF code. extable 'insn' field contains relative offset of
the instruction and 'fixup' field contains relative offset of the
fixup entry. Example layout of BPF program with extable present:
+------------------+
| |
| |
0x4020 -->| ld r27,4(r3) |
| |
| |
0x40ac -->| lwz r3,0(r4) |
| |
| |
|------------------|
0x4280 -->| li r27,0 | \ fixup entry
| b 0x4024 | /
0x4288 -->| li r3,0 |
| b 0x40b0 |
|------------------|
0x4290 -->| insn=0xfffffd90 | \ extable entry
| fixup=0xffffffec | /
0x4298 -->| insn=0xfffffe14 |
| fixup=0xffffffec |
+------------------+
(Addresses shown here are chosen random, not real)
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211012123056.485795-6-hbathini@linux.ibm.com
Define and use PPC_RAW_BRANCH() macro instead of open coding it. This
macro is used while adding BPF_PROBE_MEM support.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211012123056.485795-5-hbathini@linux.ibm.com
In case of extra_pass, usual JIT passes are always skipped. So,
extra_pass is always false while calling bpf_jit_build_body() and
can be removed.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211012123056.485795-3-hbathini@linux.ibm.com
SEEN_STACK is unused on PowerPC. Remove it. Also, have
SEEN_TAILCALL use 0x40000000.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211012123056.485795-2-hbathini@linux.ibm.com
The EEH recovery logic in eeh_handle_normal_event() has some pretty strange
flow control. If we remove all the actual recovery logic we're left with
the following skeleton:
if (result != PCI_ERS_RESULT_DISCONNECT) {
...
}
if (result != PCI_ERS_RESULT_DISCONNECT) {
...
}
if (result == PCI_ERS_RESULT_NONE) {
...
}
if (result == PCI_ERS_RESULT_CAN_RECOVER) {
...
}
if (result == PCI_ERS_RESULT_CAN_RECOVER) {
...
}
if (result == PCI_ERS_RESULT_NEED_RESET) {
...
}
if ((result == PCI_ERS_RESULT_RECOVERED) ||
(result == PCI_ERS_RESULT_NONE)) {
...
goto out;
}
/*
* unsuccessful recovery / PCI_ERS_RESULT_DISCONECTED
* handling is here.
*/
...
out:
...
Most of the "if () { ... }" blocks above change "result" to
PCI_ERS_RESULT_DISCONNECTED if an error occurs in that recovery step. This
makes the control flow a bit confusing since it breaks the early-exit
pattern that is generally used in Linux. In any case we end up handling the
error in the final else block so why not just jump there directly? Doing so
also allows us to de-indent a bunch of code.
No functional changes.
[dja: rebase on top of linux-next + my preceeding refactor,
move clearing the EEH_DEV_NO_HANDLER bit above the first goto so that
it is always clear in the error handler code as it was before.]
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211015070628.1331635-2-dja@axtens.net
The control flow of eeh_handle_normal_event() is a bit tricky.
Break out one of the error handling paths - rather than be in an else
block, we'll make it part of the regular body of the function and put a
'goto out;' in the true limb of the if.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211015070628.1331635-1-dja@axtens.net
On POWER10, the automatic "save & restore" of interrupt context is
always available. Provide a way to deactivate it for tests or
performance.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211105102636.1016378-11-clg@kaod.org
