Those were removed from msm8974.dtsi as part of a recent cleanup commit,
so add them back for FP2.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220421214243.352469-3-luca@z3ntu.xyz
Set the relevant properties on the smbb charger to allow the device to
charge properly.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220421214243.352469-2-luca@z3ntu.xyz
Configure the touchscreen found on the new display module of the FP2.
To add some detail, FP2 has two different screen/touchscreen variants
("display module"), the old module has Synaptics touchscreen, the new
one this Ilitek touchscreen.
We're only supporting the new display module for now.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220421214243.352469-1-luca@z3ntu.xyz
This device node is unused now that we've removed the driver that
consumed it in the kernel. Drop the unused node to save some space.
Cc: Alex Elder <elder@linaro.org>
Cc: Taniya Das <quic_tdas@quicinc.com>
Cc: Mike Tipton <quic_mdtipton@quicinc.com>
Cc: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415005828.1980055-2-swboyd@chromium.org
All other msm8974 dts files are licensed as GPL-2.0 so add the same
header to the files where it's missing.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220421211936.345168-3-luca@z3ntu.xyz
Clean up and commonize (where possible and it makes sense to) I2C, UART
and SDHCI nodes and pin configurations.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415115633.575010-20-konrad.dybcio@somainline.org
- Remove regulators from the SoC DTSI
- cpu_pmu{} -> pmu{}
- move modem/iris regulators out of here; only FP2 used them
- tcsr_mutex is moved out of /soc
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
[bjorn: Rebased on top of Krzysztof's fixes]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415115633.575010-18-konrad.dybcio@somainline.org
Add the 'pro' part to the filenames of DTs of devices that are based on
this SoC to make in easier to differentiate between Snapdragon 800- and
801-based platforms.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415115633.575010-16-konrad.dybcio@somainline.org
Use &labels to align with the style used in new DTS and apply tiny
style fixes.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
[bjorn: Rebased ontop of Krzysztof's fixes]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415115633.575010-14-konrad.dybcio@somainline.org
Sony Xperia Z1 and Z1 compact are almost identical, and that shows in
their DTs. Commonize the repeating parts and modernize the DTs to use
labels.
As a bonus, Z1C gains touchscreen support in this commit, as it was
present on Z1 already.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
[bjorn: Rebased on top of Krzysztof's fixes]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415115633.575010-13-konrad.dybcio@somainline.org
Use &labels to align with the style used in new DTS and apply tiny
style fixes.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
[bjorn: Rebased on top of Krzysztof's fixes]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415115633.575010-12-konrad.dybcio@somainline.org
Use &labels to align with the style used in new DTS and apply tiny
style fixes.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
[bjorn: Rebased on top of Krzysztof's fixes]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415115633.575010-11-konrad.dybcio@somainline.org
Use &labels to align with the style used in new DTS and apply tiny
style fixes.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
[bjorn: Rebased on top of Krzysztof underscore fixes]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415115633.575010-10-konrad.dybcio@somainline.org
Use &labels to align with the style used in new DTS and apply tiny
style fixes.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
[bjorn: Rebased ontop of Krzysztof's underscore fixes]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415115633.575010-9-konrad.dybcio@somainline.org
- Add missing labels (and remove their redefinition from klte)
- Commonize bus-width
- Add non-removable on sdhc_1, as it's supposed to have an eMMC on it
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415115633.575010-7-konrad.dybcio@somainline.org
Fix up formatting, move status=disabled to the end where it belongs,
rename DSI PHY label to match newer DTs, use tabs where possible,
unwrap lines where wrapping is not necessary and don't disable mdp,
as MDSS is useless without it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415115633.575010-6-konrad.dybcio@somainline.org
It's either uart10, or blsp2_uart4, not blsp2_uart10, as there aren't 10
UARTs on BLSP2. Fix the naming to align with what's done in arm64/qcom.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415115633.575010-4-konrad.dybcio@somainline.org
SONY phones/tables are based on a common board ('platform'). Devices
based on the same are often close to identical. Mention their association
in filenames, like it's done in arm64 DTs.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415115633.575010-2-konrad.dybcio@somainline.org
The clock controller of RPMH RSC does not have 'reg' property, so should
not have unit address.
Fixes: bae2f5979c ("ARM: dts: qcom: Add SDX65 platform and MTP board support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220411085935.130072-2-krzysztof.kozlowski@linaro.org
Add devicetree support for SDHCI controller found in Qualcomm SDX65
platform. The SDHCI controller is based on the MSM SDHCI v5 IP.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1649670615-21268-4-git-send-email-quic_rohiagar@quicinc.com
Align RPM requests node with DT schema by using hyphen instead of
underscore.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[bjorn: Fixed up qcom-{apq8074,msm8974}-*.dts to match the qcom-msm8974.dtsi]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220401201035.189106-8-krzysztof.kozlowski@linaro.org
Add syscon compatible required for tsens driver to correctly probe driver
and access the reg. Also add cxo and pxo tag and declare them as gcc clock
now requires them for the ipq8064 gcc driver that has now been modernized.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226135235.10051-16-ansuelsmth@gmail.com
Add support for this smartwatch, based on Snapdragon 400 SoC.
Currently supported functionality:
* Internal storage
* USB
* Charger
* Power button
* Vibration motor
* Bluetooth
* Wifi
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226101939.1011551-2-luca@z3ntu.xyz
Document the ASUS ZenWatch 2 ("sparrow") which is a smartwatch based on
Snapdragon 400 SoC.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226101939.1011551-1-luca@z3ntu.xyz
The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.
Fixes: 5a9fc531f6 ("ARM: dts: msm8974: add display support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220302225411.2456001-6-dmitry.baryshkov@linaro.org
The APCS block on SDX65 acts as a mailbox controller and also provides
clock output for the Cortex A7 CPU.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1645505785-2271-5-git-send-email-quic_rohiagar@quicinc.com
