There really is no need to print this message for anyone not trying to
debug the driver:
rtl8723a_update_ramask => mac_id:0, networkType:0x0b, mask:0x000fffff
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set these bits directly in the code instead of fiddling with wrapper
macros.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In every last use case, the header was just cleared with memset() so
there is no need to use the complex SetSeqNum() macro when
cpu_to_le16(IEEE80211_SN_TO_SEQ()) output will do just fine.
In addition, get rid of __le16 *fctrl usage when there is no need for
it.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Control frames will not be fragmented, so we should fully initialize
the seq_ctrl field to zero. This avoids leftover stack bits remaining
set in the generated frame's seq_ctrl field.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using SetSeqNum() on an uninitialized stack frame leaves us open to
leaving random fragment bits set in seq_ctrl in the frame header.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rip out P2P defines since they are effectively never used.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Must be the 17th duplicate of this list in the kernel
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This exposed a nice endian bug in collect_bss_info23a() where two
bytes in little-endian order were copied into a u32 and afterwards
le32_to_cpu() was applied to it....
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This allows the removal of the ugly struct ndis_8802_11_wep and simplify
rtw_cfg80211_add_wep(). In addition remove unused element ndiswep from
struct security_priv.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is only called from ioctl_cfg80211.c so we can move it here and
declare it static.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This will allow us to switch to using WLAN_CIPHER_SUITE_* later
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In addition move rtw_set_802_11_infrastructure_mode23a() to
ioctl_cfg80211.c and declare it static.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In addition, this commit contains a TODO file for this driver
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These files are specific to the RTL8192EE
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the wireless tree, this code forms a separate mini driver. As the changes
needed for the later drivers has not yet been merged, a separate version
is needed here.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This part is the equivalent of rtlwifi in the wireless tree. As the changes
needed for the RTL8192EE have not yet been merged, a separate version is still
needed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This resolves the conflicts in the files:
drivers/iio/adc/Kconfig
drivers/staging/rtl8723au/os_dep/usb_ops_linux.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull two powerpc fixes from Ben Herrenschmidt:
"Here are a couple of fixes for 3.15. One from Anton fixes a nasty
regression I introduced when trying to fix a loss of irq_work whose
consequences is that we can completely lose timer interrupts on a
CPU... not pretty.
The other one is a change to our PCIe reset hook to use a firmware
call instead of direct config space accesses to trigger a fundamental
reset on the root port. This is necessary so that the FW gets a
chance to disable the link down error monitoring, which would
otherwise trip and cause subsequent fatal EEH error"
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: irq work racing with timer interrupt can result in timer interrupt hang
powerpc/powernv: Reset root port in firmware
Pull two btrfs fixes from Chris Mason:
"This has two fixes that we've been testing for 3.16, but since both
are safe and fix real bugs, it makes sense to send for 3.15 instead"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: send, fix incorrect ref access when using extrefs
Btrfs: fix EIO on reading file after ioctl clone works on it
Pull two ceph fixes from Sage Weil:
"The first patch fixes a problem when we have a page count of 0 for
sendpage which is triggered by zfs. The second fixes a bug in CRUSH
that was resolved in the userland code a while back but fell through
the cracks on the kernel side"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
crush: decode and initialize chooseleaf_vary_r
libceph: fix corruption when using page_count 0 page in rbd
Code inspection of the XFS error number sign translations found a bunch of
issues, including returning incorrectly signed errors for some data integrity
operations. These leak to userspace and result in applications not getting the
errors correctly reported. Hence they need fixing sooner rather than later.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=5syB
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-3.15-rc6' of git://oss.sgi.com/xfs/xfs
Pull xfs fixes from Dave Chinner:
"Code inspection of the XFS error number sign translations found a
bunch of issues, including returning incorrectly signed errors for
some data integrity operations.
These leak to userspace and result in applications not getting the
errors correctly reported. Hence they need fixing sooner rather than
later.
A couple of the bugs are in data integrity operations, a couple more
are in the new COLLAPSE_RANGE code. One of these came in through a
recent ext4 merge and so I had to update the base tree to 3.15-rc5
before fixing the issues"
* tag 'xfs-for-linus-3.15-rc6' of git://oss.sgi.com/xfs/xfs:
xfs: list_lru_init returns a negative error
xfs: negate xfs_icsb_init_counters error value
xfs: negate mount workqueue init error value
xfs: fix wrong err sign on xfs_set_acl()
xfs: fix wrong errno from xfs_initxattrs
xfs: correct error sign on COLLAPSE_RANGE errors
xfs: xfs_commit_metadata returns wrong errno
xfs: fix incorrect error sign in xfs_file_aio_read
xfs: xfs_dir_fsync() returns positive errno
