Rahul Tanwar reported the following bug on DT systems:
> 'ioapic_dynirq_base' contains the virtual IRQ base number. Presently, it is
> updated to the end of hardware IRQ numbers but this is done only when IOAPIC
> configuration type is IOAPIC_DOMAIN_LEGACY or IOAPIC_DOMAIN_STRICT. There is
> a third type IOAPIC_DOMAIN_DYNAMIC which applies when IOAPIC configuration
> comes from devicetree.
>
> See dtb_add_ioapic() in arch/x86/kernel/devicetree.c
>
> In case of IOAPIC_DOMAIN_DYNAMIC (DT/OF based system), 'ioapic_dynirq_base'
> remains to zero initialized value. This means that for OF based systems,
> virtual IRQ base will get set to zero.
Such systems will very likely not even boot.
For DT enabled machines ioapic_dynirq_base is irrelevant and not
updated, so simply map the IRQ base 1:1 instead.
Reported-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
Tested-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: alan@linux.intel.com
Cc: bp@alien8.de
Cc: cheol.yong.kim@intel.com
Cc: qi-ming.wu@intel.com
Cc: rahul.tanwar@intel.com
Cc: rppt@linux.ibm.com
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/20190821081330.1187-1-rahul.tanwar@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In order to quickly find a ToPA entry by its page offset in the buffer,
we're using a reverse lookup table. The problem with it is that it's a
large array of mostly similar pointers, especially so now that we're
using high order allocations from the page allocator. Because its size
is limited to whatever is the maximum for kmalloc(), it places a limit
on the number of ToPA entries per buffer, and therefore, on the total
buffer size, which otherwise doesn't have to be there.
Replace the reverse lookup table with a simple runtime lookup. With the
high order AUX allocations in place, the runtime penalty of such a lookup
is much smaller and in cases where all entries in a ToPA table are of
the same size, the complexity is O(1).
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20190821124727.73310-7-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, we're storing physical address of a ToPA table in its
descriptor, which is completely unnecessary. Since the descriptor
and the table itself share the same page, reducing the descriptor
size leaves more space for the table.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20190821124727.73310-6-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
PT uses page sized ToPA tables, where the ToPA table resides at the bottom
and its driver-specific metadata taking up a few words at the top of the
page. The split is currently calculated manually and needs to be redone
every time a field is added to or removed from the metadata structure.
Also, the 32-bit version can be made smaller.
By splitting the table and metadata into separate structures, we are making
the compiler figure out the division of the page.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20190821124727.73310-5-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, pt_buffer_reset_offsets() calculates the current ToPA entry by
casting pointers to addresses and performing ungainly subtractions and
divisions instead of a simpler pointer arithmetic, which would be perfectly
applicable in that case. Fix that.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20190821124727.73310-4-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are a few places in the PT driver that need to obtain the size of
a ToPA entry, some of them for the current ToPA entry in the buffer.
Use helpers for those, to make the lines shorter and more readable.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20190821124727.73310-3-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some of the allocation parameters are passed as function arguments,
while the CPU number for per-cpu allocation is passed via the buffer
object. There's no reason for this.
Pass the CPU as a function argument instead.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20190821124727.73310-2-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 fixes from Thomas Gleixner:
"A few fixes for x86:
- Fix a boot regression caused by the recent bootparam sanitizing
change, which escaped the attention of all people who reviewed that
code.
- Address a boot problem on machines with broken E820 tables caused
by an underflow which ended up placing the trampoline start at
physical address 0.
- Handle machines which do not advertise a legacy timer of any form,
but need calibration of the local APIC timer gracefully by making
the calibration routine independent from the tick interrupt. Marked
for stable as well as there seems to be quite some new laptops
rolled out which expose this.
- Clear the RDRAND CPUID bit on AMD family 15h and 16h CPUs which are
affected by broken firmware which does not initialize RDRAND
correctly after resume. Add a command line parameter to override
this for machine which either do not use suspend/resume or have a
fixed BIOS. Unfortunately there is no way to detect this on boot,
so the only safe decision is to turn it off by default.
- Prevent RFLAGS from being clobbers in CALL_NOSPEC on 32bit which
caused fast KVM instruction emulation to break.
- Explain the Intel CPU model naming convention so that the repeating
discussions come to an end"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/retpoline: Don't clobber RFLAGS during CALL_NOSPEC on i386
x86/boot: Fix boot regression caused by bootparam sanitizing
x86/CPU/AMD: Clear RDRAND CPUID bit on AMD family 15h/16h
x86/boot/compressed/64: Fix boot on machines with broken E820 table
x86/apic: Handle missing global clockevent gracefully
x86/cpu: Explain Intel model naming convention
Pull perf fixes from Thomas Gleixner:
"Two small fixes for kprobes and perf:
- Prevent a deadlock in kprobe_optimizer() causes by reverse lock
ordering
- Fix a comment typo"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kprobes: Fix potential deadlock in kprobe_optimizer()
perf/x86: Fix typo in comment
Mergr misc fixes from Andrew Morton:
"11 fixes"
Mostly VM fixes, one psi polling fix, and one parisc build fix.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/kasan: fix false positive invalid-free reports with CONFIG_KASAN_SW_TAGS=y
mm/zsmalloc.c: fix race condition in zs_destroy_pool
mm/zsmalloc.c: migration can leave pages in ZS_EMPTY indefinitely
mm, page_owner: handle THP splits correctly
userfaultfd_release: always remove uffd flags and clear vm_userfaultfd_ctx
psi: get poll_work to run when calling poll syscall next time
mm: memcontrol: flush percpu vmevents before releasing memcg
mm: memcontrol: flush percpu vmstats before releasing memcg
parisc: fix compilation errrors
mm, page_alloc: move_freepages should not examine struct page of reserved memory
mm/z3fold.c: fix race between migration and destruction
The AST2600 is a Cortex A7 dual core CPU that uses the ARM GIC for
interrupts and ARM timer as a clocksource.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
In preparation for adding the ast2600 which does not use this timer.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
CONFIG_STRICT_KERNEL_RWX is enabled by default with ARMv7.
Turn on HIGHMEM as the EVB has 2GB of RAM, and not all is usable without
hihgmem.
The SoC contains Cortex A7 supporting VFP and has two CPUs.
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
This adds the ASPEED AST2600 system and associated ASPEED devices so we
get build coverage.
The changes to the UART configuration to ensure the default console
(UART5) works.
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Configure IRQ line for SX1503 GPIO expander. We already have
appropriate pinmux entry and all that is missing is "interrupt-parent"
and "interrupts" properties. Add them.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Two fixes for regressions in this merge window:
- select the Kconfig symbols for the noncoherent dma arch helpers
on arm if swiotlb is selected, not just for LPAE to not break then
Xen build, that uses swiotlb indirectly through swiotlb-xen
- fix the page allocator fallback in dma_alloc_contiguous if the CMA
allocation fails
-----BEGIN PGP SIGNATURE-----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=DXk9
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.3-5' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"Two fixes for regressions in this merge window:
- select the Kconfig symbols for the noncoherent dma arch helpers on
arm if swiotlb is selected, not just for LPAE to not break then Xen
build, that uses swiotlb indirectly through swiotlb-xen
- fix the page allocator fallback in dma_alloc_contiguous if the CMA
allocation fails"
* tag 'dma-mapping-5.3-5' of git://git.infradead.org/users/hch/dma-mapping:
dma-direct: fix zone selection after an unaddressable CMA allocation
arm: select the dma-noncoherent symbols for all swiotlb builds
Commit 0cfaee2af3 ("include/asm-generic/5level-fixup.h: fix variable
'p4d' set but not used") converted a few functions from macros to static
inline, which causes parisc to complain,
In file included from include/asm-generic/4level-fixup.h:38:0,
from arch/parisc/include/asm/pgtable.h:5,
from arch/parisc/include/asm/io.h:6,
from include/linux/io.h:13,
from sound/core/memory.c:9:
include/asm-generic/5level-fixup.h:14:18: error: unknown type name 'pgd_t'; did you mean 'pid_t'?
#define p4d_t pgd_t
^
include/asm-generic/5level-fixup.h:24:28: note: in expansion of macro 'p4d_t'
static inline int p4d_none(p4d_t p4d)
^~~~~
It is because "4level-fixup.h" is included before "asm/page.h" where
"pgd_t" is defined.
Link: http://lkml.kernel.org/r/20190815205305.1382-1-cai@lca.pw
Fixes: 0cfaee2af3 ("include/asm-generic/5level-fixup.h: fix variable 'p4d' set but not used")
Signed-off-by: Qian Cai <cai@lca.pw>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Due to their large MTU and potentially low utilization of TX buffers,
IQD devices in particular require fast TX recycling. This makes them
a prime candidate for a TX NAPI path in qeth.
qeth_tx_poll() uses the recently introduced qdio_inspect_queue() helper
to poll the TX queue for completed buffers. To avoid hogging the CPU for
too long, we yield to the stack after completing an entire queue's worth
of buffers.
While IQD is expected to transfer its buffers synchronously (and thus
doesn't support TX interrupts), a timer covers for the odd case where a
TX buffer doesn't complete synchronously. Currently this timer should
only ever fire for
(1) the mcast queue,
(2) the occasional race, where the NAPI poll code observes an update to
queue->used_buffers while the TX doorbell hasn't been issued yet.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a driver wants to use the new Output Queue poll code, then the qdio
layer must disable its internal Queue scanning. Let the driver select
this mode by passing a special scan_threshold of 0.
As the scan_threshold is the same for all Output Queues, also move it
into the main qdio_irq struct. This allows for fast opt-out checking, a
driver is expected to operate either _all_ or none of its Output Queues
in polling mode.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While commit d36deae750 ("qdio: extend API to allow polling") enhanced
the qdio layer so that drivers can poll their Input Queues, we don't
have the corresponding infrastructure for Output Queues yet.
Factor out a helper that scans a single QDIO Queue, so that qeth can
implement TX NAPI on top of it.
While doing so, remove the duplicated tracking of the next-to-scan index
(q->first_to_check vs q->first_to_kick) in this code path.
qdio_handle_aobs() needs to move slightly upwards in the code hierarchy,
so that it's still called from the polling path.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for i.MX6UL modules from Kontron Electronics GmbH (before
acquisition: Exceet Electronics) and evalkit boards based on it:
1. N6310 SOM: i.MX6 UL System-on-Module, a 25x25 mm solderable module
(LGA pads and pin castellations) with 256 MB RAM, 1 MB NOR-Flash,
256 MB NAND and other interfaces,
2. N6310 S: evalkit, w/wo eMMC, without display,
3. N6310 S 43: evalkit with 4.3" display,
The work is based on Exceet/Kontron source code (GPLv2) with numerous
changes:
1. Reorganize files,
2. Rename Exceet -> Kontron,
3. Rename models/compatibles to match newest Kontron product naming,
4. Fix coding style errors and adjust to device tree coding guidelines,
5. Fix DTC warnings,
6. Extend compatibles so eval boards inherit the SoM compatible,
7. Use defines instead of GPIO and interrupt flag values,
8. Use proper vendor compatible for Macronix SPI NOR,
9. Replace deprecated bindings with proper ones,
10. Sort nodes alphabetically,
11. Remove Admatec display nodes (not yet supported).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The SolidRun Hummingboard Pulse carrier board carries the SolidRun
i.MX8MQ based SOM.
Notably missing is PCIe support that depends on analog PLLOUT clock.
Current imx clk driver does not support this clock.
Signed-off-by: Jon Nettleton <jon@solid-run.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fiber-optic modules attached to the bus are only rated to work at
100 kHz, so decrease the bus frequency to accommodate that.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This patch adds the spi-flash nodes under the DSPI controller for
ls1088a-qds boards.
Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This patch adds the DSPI controller node for ls1088a boards.
Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Recent changes to the Atheros at803x driver cause
the approach taken here to stop working because
commit 6d4cd041f0
("net: phy: at803x: disable delay only for RGMII mode")
and commit cd28d1d6e5
("net: phy: at803x: Disable phy delay for RGMII mode")
fix the AR8031 driver to configure the phy's (RX/TX)
delays as per the 'phy-mode' in the device tree.
In particular, the phy tx (and rx) delays are updated
again as per the 'phy-mode' *after* the code in here
runs.
Things worked before above commits, because the AR8031
comes out of reset with RX delay enabled, and the
at803x driver didn't touch the delay configuration at
all when "rgmii" mode was selected.
It appears the code in here tries to make device
trees work that incorrectly specify "rgmii", but
that can't work any more and it is imperative since
above commits to have the phy-mode configured
correctly in the device tree.
I suspect there are a few imx7d based boards using
the ar8031 phy and phy-mode = "rgmii", but given I
don't know which ones exactly, I am not in a
position to update the respective device trees.
Hence this patch is simply removing the superfluous
code from the imx7d initialisation. An alternative
could be to add a warning instead, but that would
penalize all boards that have been updated already.
Signed-off-by: André Draszik <git@andred.net>
CC: Russell King <linux@armlinux.org.uk>
CC: Shawn Guo <shawnguo@kernel.org>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Pengutronix Kernel Team <kernel@pengutronix.de>
CC: Fabio Estevam <festevam@gmail.com>
CC: NXP Linux Team <linux-imx@nxp.com>
CC: Kate Stewart <kstewart@linuxfoundation.org>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Leonard Crestez <leonard.crestez@nxp.com>
CC: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The rtc8564 is made by Epson but is similar to the NXP pcf8563. Use the
correct vendor name.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The mainline PCIe PHY driver has it's own devicetree node. Update the
clock alias so the mainline driver finds the clocks.
The first PCIe PHY is located at 0x1f106800 and exists on VRX200, ARX300
and GRX390.
The second PCIe PHY is located at 0x1f700400 and exists on ARX300 and
GRX390.
The third PCIe PHY is located at 0x1f106a00 and exists onl on GRX390.
Lantiq's board support package (called "UGW") names these registers
"PDI".
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: john@phrozen.org
Cc: kishon@ti.com
Cc: ralf@linux-mips.org
Cc: robh+dt@kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: hauke@hauke-m.de
Cc: mark.rutland@arm.com
Cc: ms@dev.tdt.de
The code in question is modifying a variable declared const through
pointer manipulation. Such code is explicitly undefined behavior, and
is the lone issue preventing malta_defconfig from booting when built
with Clang:
If an attempt is made to modify an object defined with a const-qualified
type through use of an lvalue with non-const-qualified type, the
behavior is undefined.
LLVM is removing such assignments. A simple fix is to not declare
variables const that you plan on modifying. Limiting the scope would be
a better method of preventing unwanted writes to such a variable.
Further, the code in question mentions "compiler bugs" without any links
to bug reports, so it is difficult to know if the issue is resolved in
GCC. The patch was authored in 2006, which would have been GCC 4.0.3 or
4.1.1. The minimal supported version of GCC in the Linux kernel is
currently 4.6.
For what its worth, there was UB before the commit in question, it just
added a barrier and got lucky IRT codegen. I don't think there's any
actual compiler bugs related, just runtime bugs due to UB.
Link: https://github.com/ClangBuiltLinux/linux/issues/610
Fixes: 966f4406d9 ("[MIPS] Work around bad code generation for <asm/io.h>.")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Debugged-by: Nathan Chancellor <natechancellor@gmail.com>
Suggested-by: Eli Friedman <efriedma@quicinc.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Hassan Naveed <hnaveed@wavecomp.com>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: clang-built-linux@googlegroups.com
Daniel Borkmann says:
====================
pull-request: bpf 2019-08-24
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix verifier precision tracking with BPF-to-BPF calls, from Alexei.
2) Fix a use-after-free in prog symbol exposure, from Daniel.
3) Several s390x JIT fixes plus BE related fixes in BPF kselftests, from Ilya.
4) Fix memory leak by unpinning XDP umem pages in error path, from Ivan.
5) Fix a potential use-after-free on flow dissector detach, from Jakub.
6) Fix bpftool to close prog fd after showing metadata, from Quentin.
7) BPF kselftest config and TEST_PROGS_EXTENDED fixes, from Anders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
<generated/at91_pm_data-offsets.h> is only generated and included by
arch/arm/mach-at91/, so it does not need to reside in the globally
visible include/generated/.
I renamed it to arch/arm/mach-at91/pm_data-offsets.h since the prefix
'at91_' is just redundant in mach-at91/.
My main motivation of this change is to avoid the race condition for
the parallel build (-j) when CONFIG_IKHEADERS is enabled.
When it is enabled, all the headers under include/ are archived into
kernel/kheaders_data.tar.xz and exposed in the sysfs.
In the parallel build, we have no idea in which order files are built.
- If at91_pm_data-offsets.h is built before kheaders_data.tar.xz,
the header will be included in the archive. Probably nobody will
use it, but it is harmless except that it will increase the archive
size needlessly.
- If kheaders_data.tar.xz is built before at91_pm_data-offsets.h,
the header will not be included in the archive. However, in the next
build, the archive will be re-generated to include the newly-found
at91_pm_data-offsets.h. This is not nice from the build system point
of view.
- If at91_pm_data-offsets.h and kheaders_data.tar.xz are built at the
same time, the corrupted header might be included in the archive,
which does not look nice either.
This commit fixes the race.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lore.kernel.org/r/20190823024346.591-1-yamada.masahiro@socionext.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Commit a94e4f24ec ("MIPS: init: Drop boot_mem_map") introduced a
reference to a non-existant "end" field in struct memblock_region.
Replace it with a sum of the base & size fields to fix builds with
CONFIG_PROC_VMCORE=y.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Commit a5718fe8f7 ("MIPS: mm: Drop boot_mem_map") removed the
definition of a page variable for some reason, but that variable is
still used. Restore it to fix compilation with CONFIG_HIGHMEM enabled.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Adding "rng-seed" to dtb. It's fine to add this property if original
fdt doesn't contain it. Since original seed will be wiped after
read, so use a default size 128 bytes here.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Will Deacon <will@kernel.org>
Currently in arm64, FDT is mapped to RO before it's passed to
early_init_dt_scan(). However, there might be some codes
(eg. commit "fdt: add support for rng-seed") that need to modify FDT
during init. Map FDT to RO after early fixups are done.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Use 'lea' instead of 'add' when adjusting %rsp in CALL_NOSPEC so as to
avoid clobbering flags.
KVM's emulator makes indirect calls into a jump table of sorts, where
the destination of the CALL_NOSPEC is a small blob of code that performs
fast emulation by executing the target instruction with fixed operands.
adcb_al_dl:
0x000339f8 <+0>: adc %dl,%al
0x000339fa <+2>: ret
A major motiviation for doing fast emulation is to leverage the CPU to
handle consumption and manipulation of arithmetic flags, i.e. RFLAGS is
both an input and output to the target of CALL_NOSPEC. Clobbering flags
results in all sorts of incorrect emulation, e.g. Jcc instructions often
take the wrong path. Sans the nops...
asm("push %[flags]; popf; " CALL_NOSPEC " ; pushf; pop %[flags]\n"
0x0003595a <+58>: mov 0xc0(%ebx),%eax
0x00035960 <+64>: mov 0x60(%ebx),%edx
0x00035963 <+67>: mov 0x90(%ebx),%ecx
0x00035969 <+73>: push %edi
0x0003596a <+74>: popf
0x0003596b <+75>: call *%esi
0x000359a0 <+128>: pushf
0x000359a1 <+129>: pop %edi
0x000359a2 <+130>: mov %eax,0xc0(%ebx)
0x000359b1 <+145>: mov %edx,0x60(%ebx)
ctxt->eflags = (ctxt->eflags & ~EFLAGS_MASK) | (flags & EFLAGS_MASK);
0x000359a8 <+136>: mov -0x10(%ebp),%eax
0x000359ab <+139>: and $0x8d5,%edi
0x000359b4 <+148>: and $0xfffff72a,%eax
0x000359b9 <+153>: or %eax,%edi
0x000359bd <+157>: mov %edi,0x4(%ebx)
For the most part this has gone unnoticed as emulation of guest code
that can trigger fast emulation is effectively limited to MMIO when
running on modern hardware, and MMIO is rarely, if ever, accessed by
instructions that affect or consume flags.
Breakage is almost instantaneous when running with unrestricted guest
disabled, in which case KVM must emulate all instructions when the guest
has invalid state, e.g. when the guest is in Big Real Mode during early
BIOS.
Fixes: 776b043848fd2 ("x86/retpoline: Add initial retpoline support")
Fixes: 1a29b5b7f3 ("KVM: x86: Make indirect calls in emulator speculation safe")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190822211122.27579-1-sean.j.christopherson@intel.com
There is no particular reason to not enable TSC page clocksource on
32-bit. mul_u64_u64_shr() is available and despite the increased
computational complexity (compared to 64bit) TSC page is still a huge win
compared to MSR-based clocksource.
In-kernel reads:
MSR based clocksource: 3361 cycles
TSC page clocksource: 49 cycles
Reads from userspace (utilizing vDSO in case of TSC page):
MSR based clocksource: 5664 cycles
TSC page clocksource: 131 cycles
Enabling TSC page on 32bits allows to get rid of CONFIG_HYPERV_TSCPAGE as
it is now not any different from CONFIG_HYPERV_TIMER.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lkml.kernel.org/r/20190822083630.17059-1-vkuznets@redhat.com
Hyper-V guests use the default native_sched_clock() in
pv_ops.time.sched_clock on x86. But native_sched_clock() directly uses the
raw TSC value, which can be discontinuous in a Hyper-V VM.
Add the generic hv_setup_sched_clock() to set the sched clock function
appropriately. On x86, this sets pv_ops.time.sched_clock to read the
Hyper-V reference TSC value that is scaled and adjusted to be continuous.
Also move the Hyper-V reference TSC initialization much earlier in the boot
process so no discontinuity is observed when pv_ops.time.sched_clock
calculates its offset.
[ tglx: Folded build fix ]
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lkml.kernel.org/r/20190814123216.32245-3-Tianyu.Lan@microsoft.com
Prepare to add Hyper-V sched clock callback and move Hyper-V Reference TSC
initialization much earlier in the boot process. Earlier initialization is
needed so that it happens while the timestamp value is still 0 and no
discontinuity in the timestamp will occur when pv_ops.time.sched_clock
calculates its offset.
The earlier initialization requires that the Hyper-V TSC page be allocated
statically instead of with vmalloc(), so fixup the references to the TSC
page and the method of getting its physical address.
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lkml.kernel.org/r/20190814123216.32245-2-Tianyu.Lan@microsoft.com
