Remove the shared buffer for USB requests because it is not necessary
and use a local on stack variable since the new Core USB API does not
have the constraints of usb_control_msg().
Co-developed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20210924122705.3781-16-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create and call new usb_write() instead of usbctrl_vendorreq() from
inside rtw_write{8,16,32,N}().
In old code, rtw_write{8,16,32,N}() called usbctrl_vendorreq() which in
turn uses usb_control_msg() from within a "while" loop to build a control
URB, send it off and wait for completion. usbctrl_vendorreq() was used
for both receiving and sending messages, depending on the "requesttype"
argument which is passed by callers.
Compared to usbctrl_vendorreq(), which manages both reads and writes
from and to the USB endpoint, the new usb_write() manages only writes.
For this purpose it uses the newer USB Core usb_control_msg_send() API.
The latter is preferred according both to suggestions by Greg Kroah-Hartman
and also to its actual design.
A noteworthy feature of usb_control_msg_send() is that the data pointer
can be made to a reference on the stack because it does not have the
restriction that usb_control_msg() has where the data pointer must be to
dynamically allocated memory.
usbctrl_vendorreq() used a "while" loop that we considered unnecessary
so that it is not in the new usb_write(). Furthermore, the latter has no
redundant checking, less obvious comments, no debug prints, and it manages
errors before success case. All in all, usb_write() is simpler than
usbctrl_vendorreq() and uses less lines of code.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210924122705.3781-15-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create and call new usb_read() instead of usbctrl_vendorreq() from
inside rtw_read{8,16,32}().
In old code, rtw_read{8,16,32}() called usbctrl_vendorreq() which in
turn uses usb_control_msg() from within a "while" loop to build a control
URB, send it off and wait for completion. usbctrl_vendorreq() was used for
both receiving and sending messages, depending on the "requesttype"
argument which was passed by callers.
Compared to usbctrl_vendorreq(), which managed both reads and writes
from and to the USB endpoint, the new usb_read() manages only reads. For
this purpose it uses the newer USB Core usb_control_msg_recv() API. The
latter is preferred according both to a suggestion by Greg Kroah-Hartman
and also to its actual design.
Two noteworthy features of usb_control_msg_recv() are that (1) the data
pointer can be made to a reference on the stack because it does not have
the restriction that usb_control_msg() has where the data pointer must be
to dynamically allocated memory, and that (2) the whole message must be
properly received from the device in order for this function to be
successfuli (if a device returns less than the expected amount of data,
then the function will fail).
usbctrl_vendorreq() uses a "while" loop that we considered unnecessary
so that it is not in the new usb_read(). Furthermore, the latter has no
redundant checking, less obvious comments, and it manages errors before
success cases. All in all, usb_read() is simpler than
usbctrl_vendorreq() and uses less lines of code.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210924122705.3781-14-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove an unnecessary 'if' test from usbctrl_vendorreq() because
"length" is never greater than MAX_VENDOR_REQ_CMD_SIZE.
Co-developed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210924122705.3781-13-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the type of "data" from __le32 to __le16. The size of the data
that usbctrl_vendorreq() will read is two bytes in little endian order,
so the most suitable type is __le16.
With the old code, since the two most significant bytes of data are not
initialized, KMSan can likely detect the reading of uninitialized data,
so this change can prevent the checker from complaining.
Co-developed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210924122705.3781-12-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove an unnecessary bitwise AND because "length" can never be greater
than 0xffff since VENDOR_CMD_MAX_DATA_LEN is defined as '254'.
Co-developed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210924122705.3781-11-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the unnecessary buffer "u8 buf[VENDOR_CMD_MAX_DATA_LEN]" and
pass directly "data" to usbctrl_vendorreq().
Co-developed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210924122705.3781-10-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the type of "data" from __le32 to __le16 in rtw_write16(). The
argument "val", which is u16, after being conditionally swapped to little
endian, is assigned to "data"; therefore, __le16 is the most suitable type
for "data". Remove the bitwise AND of "val" with 0xffff because it is
redundant. Use cpu_to_le16() because "data" is __le16.
Co-developed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210924122705.3781-9-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary casts from rtw_read{8,16,32}() and from
rtw_write{8,16,32,N}().
Co-developed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210924122705.3781-8-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename variables in rtw_read{8.16.32}() and in rtw_write{8,16,32,N}()
because of unnecessary 'p' (that probably stand for "pointer to") and
'w' (that probably stands for "word"):
pio_priv => io_priv;
pintfhdl => intf;
wvalue => value.
Co-developed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210924122705.3781-7-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove an unnecessary comment from usbctrl_vendorreq().
Co-developed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210924122705.3781-6-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reorder comments in usbctrl_vendorreq() to follow Linux coding style.
Delete two of them because they are "obvious".
Co-developed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210924122705.3781-5-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary test for "!io_buf" in usbctrl_vendorreq(). This test
is not necessary because io_buf has been assigned with the address of
a region of dynamically allocated memory (dvobj->usb_alloc_vendor_req_buf)
by rtw_init_intf_priv() in os_dep/usb_intf.c.
Co-developed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210924122705.3781-4-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reorder variables declarations according to the "Reverse Xmas Tree"
style.
Co-developed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210924122705.3781-3-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean up symbol names in usbctrl_vendorreq():
pdata => data;
pio_priv => io_priv;
pintfhdl => intf.
Co-developed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210924122705.3781-2-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function ODM_CheckPowerStatus() returns always true. Checking its
return value is not necessary. Remove the function and related code.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210925074013.14693-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LedStrategy is set but never used. Remove it from struct led_priv and
remove the now unused enum LED_STRATEGY_871x as well.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210924204917.6313-6-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LedStrategy is SW_LED_MODE1 in this driver. Remove led control
functions that are not used for SW_LED_MODE1.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210924204917.6313-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LedStrategy is SW_LED_MODE1 in this driver. Remove led blink
functions that are not used for SW_LED_MODE1.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210924204917.6313-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The functions rtw_proc_{init,remove}_one() are empty and can be
removed. There are non-empty versions of these functions covered by
#if 0. Remove this dead code as well.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210923164556.9492-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field DynamicTxHighPowerLvl of struct dm_priv is set but never
used. Remove it and remove now unused variables from
odm_DynamicTxPowerInit().
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210921194658.10654-8-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In this driver DynamicTxHighPowerLvl is set to TxHighPwrLevel_Normal
and never changed. In the file rtl8188e_rf6052.c there are some if
statements that check DynamicTxHighPowerLvl for other values than
TxHighPwrLevel_Normal. The code in the if blocks is never executed.
Remove the dead code.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210921194658.10654-7-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fields bDynamicTxPowerEnable and LastDTPLvl of struct dm_priv
are set but never used. Remove them.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210921194658.10654-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tx_thread in pi433 works for transmitting. it reads tx_cfg and data
stored in kfifo put in pi433_write() and transmits. If it exits,
pi433_write() just store its data and no one transmits data. So,
tx_thread should not exit even when it failed for setting registers.
It seems that it's okay to go to abort and continue to loop and wait for
writing.
Signed-off-by: Sidong Yang <realwakka@gmail.com>
Link: https://lore.kernel.org/r/20210923073115.7933-1-realwakka@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
