Convert the ST NCI (ST21NFCB) NFC controller to DT schema format.
Changes during bindings conversion:
1. Add a new required "reg" property for SPI binding, because SPI child
devices use it as chip-select.
2. Drop the "clock-frequency" property during conversion because it is a
property of I2C bus controller, not I2C slave device. It was also
never used by the driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211011073934.34340-7-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the ST ST21NFCA NFC controller to DT schema format.
Changes during bindings conversion:
1. Add a new required "interrupts" property, because it was missing in
the old bindings by mistake.
2. Drop the "clock-frequency" property during conversion because it is a
property of I2C bus controller, not I2C slave device. It was also
never used by the driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211011073934.34340-5-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the NXP PN532 NFC controller to DT schema format.
Drop the "clock-frequency" property during conversion because it is a
property of I2C bus controller, not I2C slave device. It was also never
used by the driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211011073934.34340-4-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the NXP NCI NFC controller to DT schema format.
Drop the "clock-frequency" property during conversion because it is a
property of I2C bus controller, not I2C slave device. It was also never
used by the driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211011073934.34340-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
WCD938X on SM8250 MTP is connected via TX macro which has MBHC support,
So add this jack support in the soundcard driver too.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211006172745.22103-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On SM8250 MTP boards WCD938x codec is connected via TX and RX Macros,
so add support for this dais in the soundcard driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211006172745.22103-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Yellow Carp ACP6x drivers can be built by selecting necessary
kernel config option.
The patch enables build support of the same.
Signed-off-by: Vijendar Mukunda<Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20211018112044.1705805-11-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add ACP6x irq handler for handling irq events for ACP IP.
Add pdm irq events handling.
Whenever audio data equal to the PDM watermark level are consumed,
interrupt is generated. Acknowledge the interrupt.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20211018112044.1705805-7-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PDM platform driver binds to the platform device created by
ACP6x PCI device. PDM driver registers ALSA DMA and CPU DAI
components with ASoC framework.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20211018112044.1705805-6-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP6.x IP has PDM decoder block.
Create a platform device for it, so that the PDM platform driver
can be bound to this device.
Pass PCI resources like MMIO to this platform device.
Create a platform device for generic dmic codec driver.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20211018112044.1705805-5-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert Elan touchpad documentation to the YAML syntax.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20211009183016.65218-1-david@ixit.cz
Signed-off-by: Rob Herring <robh@kernel.org>
Update clk_composite_determine_rate() to use rate_ops.determine_rate
when available in combination with a mux. So far clk_divider_ops provide
both, .round_rate and .determine_rate. Removing the former would make
clk-composite fail silently for example on Rockchip platforms (which
heavily use composite clocks).
Add support for using rate_ops.determine_rate when either
rate_ops.round_rate is not available or both (.round_rate and
.determine_rate) are provided.
Suggested-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20211016105022.303413-3-martin.blumenstingl@googlemail.com
Tested-by: Alex Bee <knaerzche@gmail.com>
Tested-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Commit 69a00fb3d6 ("clk: divider: Implement and wire up
.determine_rate by default") switches clk_divider_ops to implement
.determine_rate by default. This breaks composite clocks with multiple
parents because clk-composite.c does not use the special handling for
mux + divider combinations anymore (that was restricted to rate clocks
which only implement .round_rate, but not .determine_rate).
Alex reports:
This breaks lot of clocks for Rockchip which intensively uses
composites, i.e. those clocks will always stay at the initial parent,
which in some cases is the XTAL clock and I strongly guess it is the
same for other platforms, which use composite clocks having more than
one parent (e.g. mediatek, ti ...)
Example (RK3399)
clk_sdio is set (initialized) with XTAL (24 MHz) as parent in u-boot.
It will always stay at this parent, even if the mmc driver sets a rate
of 200 MHz (fails, as the nature of things), which should switch it
to any of its possible parent PLLs defined in
mux_pll_src_cpll_gpll_npll_ppll_upll_24m_p (see clk-rk3399.c) - which
never happens.
Restore the original behavior by changing the priority of the conditions
inside clk-composite.c. Now the special rate + mux case (with rate_ops
having a .round_rate - which is still the case for the default
clk_divider_ops) is preferred over rate_ops which have .determine_rate
defined (and not further considering the mux).
Fixes: 69a00fb3d6 ("clk: divider: Implement and wire up .determine_rate by default")
Reported-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20211016105022.303413-2-martin.blumenstingl@googlemail.com
Tested-by: Alex Bee <knaerzche@gmail.com>
Tested-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The 0-element arrays that are used as memcpy() destinations are actually
flexible arrays. Adjust their structures accordingly so that memcpy()
can better reason able their destination size (i.e. they need to be seen
as "unknown" length rather than "zero").
In some cases, use of the DECLARE_FLEX_ARRAY() helper is needed when a
flexible array is alone in a struct.
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Manish Rangankar <mrangankar@marvell.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Fabio Aiuto <fabioaiuto83@gmail.com>
Cc: Ross Schmidt <ross.schm.dev@gmail.com>
Cc: Marco Cesati <marcocesati@gmail.com>
Cc: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-staging@lists.linux.dev
Signed-off-by: Kees Cook <keescook@chromium.org>
There are many places where kernel code wants to have several different
typed trailing flexible arrays. This would normally be done with multiple
flexible arrays in a union, but since GCC and Clang don't (on the surface)
allow this, there have been many open-coded workarounds, usually involving
neighboring 0-element arrays at the end of a structure. For example,
instead of something like this:
struct thing {
...
union {
struct type1 foo[];
struct type2 bar[];
};
};
code works around the compiler with:
struct thing {
...
struct type1 foo[0];
struct type2 bar[];
};
Another case is when a flexible array is wanted as the single member
within a struct (which itself is usually in a union). For example, this
would be worked around as:
union many {
...
struct {
struct type3 baz[0];
};
};
These kinds of work-arounds cause problems with size checks against such
zero-element arrays (for example when building with -Warray-bounds and
-Wzero-length-bounds, and with the coming FORTIFY_SOURCE improvements),
so they must all be converted to "real" flexible arrays, avoiding warnings
like this:
fs/hpfs/anode.c: In function 'hpfs_add_sector_to_btree':
fs/hpfs/anode.c:209:27: warning: array subscript 0 is outside the bounds of an interior zero-length array 'struct bplus_internal_node[0]' [-Wzero-length-bounds]
209 | anode->btree.u.internal[0].down = cpu_to_le32(a);
| ~~~~~~~~~~~~~~~~~~~~~~~^~~
In file included from fs/hpfs/hpfs_fn.h:26,
from fs/hpfs/anode.c:10:
fs/hpfs/hpfs.h:412:32: note: while referencing 'internal'
412 | struct bplus_internal_node internal[0]; /* (internal) 2-word entries giving
| ^~~~~~~~
drivers/net/can/usb/etas_es58x/es58x_fd.c: In function 'es58x_fd_tx_can_msg':
drivers/net/can/usb/etas_es58x/es58x_fd.c:360:35: warning: array subscript 65535 is outside the bounds of an interior zero-length array 'u8[0]' {aka 'unsigned char[]'} [-Wzero-length-bounds]
360 | tx_can_msg = (typeof(tx_can_msg))&es58x_fd_urb_cmd->raw_msg[msg_len];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/net/can/usb/etas_es58x/es58x_core.h:22,
from drivers/net/can/usb/etas_es58x/es58x_fd.c:17:
drivers/net/can/usb/etas_es58x/es58x_fd.h:231:6: note: while referencing 'raw_msg'
231 | u8 raw_msg[0];
| ^~~~~~~
However, it _is_ entirely possible to have one or more flexible arrays
in a struct or union: it just has to be in another struct. And since it
cannot be alone in a struct, such a struct must have at least 1 other
named member -- but that member can be zero sized. Wrap all this nonsense
into the new DECLARE_FLEX_ARRAY() in support of having flexible arrays
in unions (or alone in a struct).
As with struct_group(), since this is needed in UAPI headers as well,
implement the core there, with a non-UAPI wrapper.
Additionally update kernel-doc to understand its existence.
https://github.com/KSPP/linux/issues/137
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.
Use memset_startat() so memset() doesn't get confused about writing
beyond the destination member that is intended to be the starting point
of zeroing through the end of the struct.
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: David Sterba <dsterba@suse.com>
Cc: linux-btrfs@vger.kernel.org
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
A common idiom in kernel code is to wipe the contents of a structure
starting from a given member. These open-coded cases are usually difficult
to read and very sensitive to struct layout changes. Like memset_after(),
introduce a new helper, memset_startat() that takes the target struct
instance, the byte to write, and the member name where zeroing should
start.
Note that this doesn't zero padding preceding the target member. For
those cases, memset_after() should be used on the preceding member.
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Francis Laniel <laniel_francis@privacyrequired.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.
Clear trailing padding bytes using the new helper so that memset()
doesn't get confused about writing "past the end" of the last struct
member. There is no change to the resulting machine code.
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
A common idiom in kernel code is to wipe the contents of a structure
after a given member. This is especially useful in places where there is
trailing padding. These open-coded cases are usually difficult to read
and very sensitive to struct layout changes. Introduce a new helper,
memset_after() that takes the target struct instance, the byte to write,
and the member name after which the zeroing should start.
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Francis Laniel <laniel_francis@privacyrequired.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Before changing anything about memcpy(), memmove(), and memset(), add
run-time tests to check basic behaviors for any regressions.
Signed-off-by: Kees Cook <keescook@chromium.org>
While the run-time testing of FORTIFY_SOURCE is already present in
LKDTM, there is no testing of the expected compile-time detections. In
preparation for correctly supporting FORTIFY_SOURCE under Clang, adding
additional FORTIFY_SOURCE defenses, and making sure FORTIFY_SOURCE
doesn't silently regress with GCC, introduce a build-time test suite that
checks each expected compile-time failure condition.
As this is relatively backwards from standard build rules in the
sense that a successful test is actually a compile _failure_, create
a wrapper script to check for the correct errors, and wire it up as
a dummy dependency to lib/string.o, collecting the results into a log
file artifact.
Signed-off-by: Kees Cook <keescook@chromium.org>
The Silead GSL1680 Touchscreen Controller is supported by Linux thanks
to its device tree binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211015073006.8939-1-maxime@cerno.tech
Signed-off-by: Rob Herring <robh@kernel.org>
mlx5_tout_ms() returns a u64, we can't directly divide it.
This is not a problem here, @timeout which is the value
that actually matters here is already a ulong, so this
implies storing return value of mlx5_tout_ms() on a ulong
should be fine.
This fixes:
ERROR: modpost: "__udivdi3" [drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.ko] undefined!
Fixes: 32def4120e ("net/mlx5: Read timeout values from DTOR")
Link: https://lore.kernel.org/r/20211018172608.1069754-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce a KVM selftest to verify that userspace manipulation of the
TSC (via the new vCPU attribute) results in the correct behavior within
the guest.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20210916181555.973085-6-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vCPU file descriptors are abstracted away from test code in KVM
selftests, meaning that tests cannot directly access a vCPU's device
attributes. Add helpers that tests can use to get at vCPU device
attributes.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20210916181555.973085-5-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The KVM_CREATE_DEVICE and KVM_{GET,SET}_DEVICE_ATTR ioctls are defined
to return a value of zero on success. As such, tighten the assertions in
the helper functions to only pass if the return code is zero.
Suggested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20210916181555.973085-4-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a selftest for the new KVM clock UAPI that was introduced. Ensure
that the KVM clock is consistent between userspace and the guest, and
that the difference in realtime will only ever cause the KVM clock to
advance forward.
Cc: Andrew Jones <drjones@redhat.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20210916181555.973085-3-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Copy over approximately clean versions of the pvclock headers into
tools. Reconcile headers/symbols missing in tools that are unneeded.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20210916181555.973085-2-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To date, VMM-directed TSC synchronization and migration has been a bit
messy. KVM has some baked-in heuristics around TSC writes to infer if
the VMM is attempting to synchronize. This is problematic, as it depends
on host userspace writing to the guest's TSC within 1 second of the last
write.
A much cleaner approach to configuring the guest's views of the TSC is to
simply migrate the TSC offset for every vCPU. Offsets are idempotent,
and thus not subject to change depending on when the VMM actually
reads/writes values from/to KVM. The VMM can then read the TSC once with
KVM_GET_CLOCK to capture a (realtime, host_tsc) pair at the instant when
the guest is paused.
Cc: David Matlack <dmatlack@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210916181538.968978-8-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactor kvm_synchronize_tsc to make a new function that allows callers
to specify TSC parameters (offset, value, nanoseconds, etc.) explicitly
for the sake of participating in TSC synchronization.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20210916181538.968978-7-oupton@google.com>
[Make sure kvm->arch.cur_tsc_generation and vcpu->arch.this_tsc_generation are
equal at the end of __kvm_synchronize_tsc, if matched is false. Reported by
Maxim Levitsky. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Protect the reference point for kvmclock with a seqcount, so that
kvmclock updates for all vCPUs can proceed in parallel. Xen runstate
updates will also run in parallel and not bounce the kvmclock cacheline.
Of the variables that were protected by pvclock_gtod_sync_lock,
nr_vcpus_matched_tsc is different because it is updated outside
pvclock_update_vm_gtod_copy and read inside it. Therefore, we
need to keep it protected by a spinlock. In fact it must now
be a raw spinlock, because pvclock_update_vm_gtod_copy, being the
write-side of a seqcount, is non-preemptible. Since we already
have tsc_write_lock which is a raw spinlock, we can just use
tsc_write_lock as the lock that protects the write-side of the
seqcount.
Co-developed-by: Oliver Upton <oupton@google.com>
Message-Id: <20210916181538.968978-6-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handling the migration of TSCs correctly is difficult, in part because
Linux does not provide userspace with the ability to retrieve a (TSC,
realtime) clock pair for a single instant in time. In lieu of a more
convenient facility, KVM can report similar information in the kvm_clock
structure.
Provide userspace with a host TSC & realtime pair iff the realtime clock
is based on the TSC. If userspace provides KVM_SET_CLOCK with a valid
realtime value, advance the KVM clock by the amount of elapsed time. Do
not step the KVM clock backwards, though, as it is a monotonic
oscillator.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210916181538.968978-5-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a new warning in clang top-of-tree (will be clang 14):
In file included from arch/x86/kvm/mmu/mmu.c:27:
arch/x86/kvm/mmu/spte.h:318:9: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
return __is_bad_mt_xwr(rsvd_check, spte) |
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
||
arch/x86/kvm/mmu/spte.h:318:9: note: cast one or both operands to int to silence this warning
The code is fine, but change it anyway to shut up this clever clogs
of a compiler.
Reported-by: torvic9@mailbox.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
