Currently EBS status in scan complete notifications is set to
success if EBS wasn't activated. FW will add a special return
value for cases when EBS wasn't activated and we add a print
of this status.
This change is needed for debug only, no behavior changes.
Signed-off-by: David Spinadel <david.spinadel@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Allow a cleaner way to access those hw-dependent registers,
instead of using the product family type etc.
Signed-off-by: Avri Altman <avri.altman@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
This adds the MIPI mode type to the types declared supported
by the driver. Without this patch, when using MIPI mode and
looking at the logs the user would see the debug destination
"UNKNOWN".
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
A minor refactoring for following patches.
This enables the reuse of the checks functions.
type=cleanup
Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
For SKL, only the HDMI codec is in the display power well while the
HD-A controller isn't. So the controller flag 'need_i915_power' is
not set to release the display power after probe, and the codec flag
'link_power_control' is set to request/release the display power via
bus link_power ops.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, ahci supports only msi and intx. To also support msix the
handling of the irq number need to be changed. The irq number for msix
devices is taken from msi_list instead of pci_dev. Thus, the irq
number of a device needs to be stored in struct ahci_host_priv now.
This allows the host controller to be activated in a generic way.
This change is only intended for ahci drivers. For that reason the irq
number is stored in struct ahci_host_priv used only by ahci drivers.
Thus, the ABI changes only for ahci_host_activate(), but existing ata
drivers (about 50) are unaffected and keep unchanged. All users of
ahci_host_activate() have been updated.
While touching drivers/ata/libahci.c, doing a small code cleanup in
ahci_port_start().
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch refactors ahci_init_interrupts() and moves msi code to a
separate function. Need the split since we add msix initialization in
a later patch. The initialization for msix will be done after msi but
before intx.
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
*) new Broadcom SATA3 PHY driver for Broadcom STB SoCs
*) new phy API to get PHY by index which is used in EHCI and
OHCI controller drivers
*) support specifying supply at port level used for multi-port PHYs
*) sparse warning fixes in miphy PHYs
*) fix pm_runtime issues in twl4030 driver
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=vPk6
-----END PGP SIGNATURE-----
Merge tag 'phy-for-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next
Kishon writes:
phy: for 4.2 merge window
*) new Broadcom SATA3 PHY driver for Broadcom STB SoCs
*) new phy API to get PHY by index which is used in EHCI and
OHCI controller drivers
*) support specifying supply at port level used for multi-port PHYs
*) sparse warning fixes in miphy PHYs
*) fix pm_runtime issues in twl4030 driver
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This patchset include the huge update of extcon core and add the new one extcon
driver and fix minor isseu of extcon drivers.
Detailed description for patchset:
1. Update the extcon core.
- Modify the extcon device name on sysfs from device name name to 'extcon[X]'
as following because if same extcon device are included in H/W development board,
the one of the two device driver might be failed on the probe().
: /sys/class/extcon/[device name] -> /sys/class/extcon/extcon[X]
- Use the unique id for external connectors instead of legacy string name.
Previously, extcon used the string name to identify the type of external
connectors. This way have the many potential issues. So, extcon core define the
unique id for each external connectors as following:
enum extcon {
EXTCON_NONE = 0x0,
/* USB external connector */
EXTCON_USB = 0x1,
EXTCON_USB_HOST = 0x2,
/* Charger external connector */
EXTCON_TA = 0x10,
EXTCON_FAST_CHARGER = 0x11,
EXTCON_SLOW_CHARGER = 0x12,
EXTCON_CHARGE_DOWNSTREAM = 0x13,
/* Audio and video external connector */
EXTCON_LINE_IN = 0x20,
EXTCON_LINE_OUT = 0x21,
EXTCON_MICROPHONE = 0x22,
EXTCON_HEADPHONE = 0x23,
...
};
- Update tye prototype of extcon_register_notifier() by using the unique id
(enum extcon) of external connectors.
- Add extcon_get_edev_name() API to get the name of extcon device on extcon
client driver because the name is included in 'struct extcon_dev' and 'struct
extcon_dev' should be handled in only drivers/extcon directory. So. if extcon
client need the name of extcon device, they could use this function.
- Unify the jig/dock and MHL-TA cable name on extcon driver.
: JIG-{USB-ON|USB-OFF|UART-ON|UART-OFF} -> JIG
: Dock-{Smart|Desk|Audio|Card} -> DOCK
: MHL-TA -> TA
- Use the capital letter for the name of all external connectors.
- Remove the optional print_name() function pointer from struct extcon_dev to
maintain the consistent name of extcon device.
2. Add the new extcon-axp288.c extcon driver.
- The extcon-axp288.c driver support for AXP288 PMIC which has the BC1.2
charger detection capability. So this extcon driver can detect the
EXTCON_SLOW_CHARGER, EXTCON_CHARGE_DOWNSTREAM and EXTCON_FAST_CHARGER.
3. Update the extcon-arizona.c driver.
- Add support for selective detection mode when headphone detection.
- Apply HP clamps for WM8280
4. Clean-up the extcon core and drivers.
- Add manufactor information of each extcon device.
- Fix checkpatch warning and minor coding style on extcon.c.c
- Fix build break if GPIOLIB is not enabled on extcon-usb-gpiio.c.
- Set the direction of gpio when calling devm_gpiod_get() on extcon-usb-gpio.c
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=Pc8L
-----END PGP SIGNATURE-----
Merge tag 'extcon-next-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes:
Update extcon for v4.2
This patchset include the huge update of extcon core and add the new one extcon
driver and fix minor isseu of extcon drivers.
Detailed description for patchset:
1. Update the extcon core.
- Modify the extcon device name on sysfs from device name name to 'extcon[X]'
as following because if same extcon device are included in H/W development board,
the one of the two device driver might be failed on the probe().
: /sys/class/extcon/[device name] -> /sys/class/extcon/extcon[X]
- Use the unique id for external connectors instead of legacy string name.
Previously, extcon used the string name to identify the type of external
connectors. This way have the many potential issues. So, extcon core define the
unique id for each external connectors as following:
enum extcon {
EXTCON_NONE = 0x0,
/* USB external connector */
EXTCON_USB = 0x1,
EXTCON_USB_HOST = 0x2,
/* Charger external connector */
EXTCON_TA = 0x10,
EXTCON_FAST_CHARGER = 0x11,
EXTCON_SLOW_CHARGER = 0x12,
EXTCON_CHARGE_DOWNSTREAM = 0x13,
/* Audio and video external connector */
EXTCON_LINE_IN = 0x20,
EXTCON_LINE_OUT = 0x21,
EXTCON_MICROPHONE = 0x22,
EXTCON_HEADPHONE = 0x23,
...
};
- Update tye prototype of extcon_register_notifier() by using the unique id
(enum extcon) of external connectors.
- Add extcon_get_edev_name() API to get the name of extcon device on extcon
client driver because the name is included in 'struct extcon_dev' and 'struct
extcon_dev' should be handled in only drivers/extcon directory. So. if extcon
client need the name of extcon device, they could use this function.
- Unify the jig/dock and MHL-TA cable name on extcon driver.
: JIG-{USB-ON|USB-OFF|UART-ON|UART-OFF} -> JIG
: Dock-{Smart|Desk|Audio|Card} -> DOCK
: MHL-TA -> TA
- Use the capital letter for the name of all external connectors.
- Remove the optional print_name() function pointer from struct extcon_dev to
maintain the consistent name of extcon device.
2. Add the new extcon-axp288.c extcon driver.
- The extcon-axp288.c driver support for AXP288 PMIC which has the BC1.2
charger detection capability. So this extcon driver can detect the
EXTCON_SLOW_CHARGER, EXTCON_CHARGE_DOWNSTREAM and EXTCON_FAST_CHARGER.
3. Update the extcon-arizona.c driver.
- Add support for selective detection mode when headphone detection.
- Apply HP clamps for WM8280
4. Clean-up the extcon core and drivers.
- Add manufactor information of each extcon device.
- Fix checkpatch warning and minor coding style on extcon.c.c
- Fix build break if GPIOLIB is not enabled on extcon-usb-gpiio.c.
- Set the direction of gpio when calling devm_gpiod_get() on extcon-usb-gpio.c
This patch does two things.
Firstly it presents the Accelerator Function Unit (AFUs) behind the POWER
Service Layer (PSL) as PCI devices on a virtual PCI Host Bridge (vPHB). This
in in addition to the PSL being a PCI device itself.
As part of the Coherent Accelerator Interface Architecture (CAIA) AFUs can
provide an AFU configuration. This AFU configuration recored is architected to
be the same as a PCI config space.
This patch sets discovers the AFU configuration records, provides AFU config
space read/write functions to these configuration records. It then enumerates
the PCI bus. It also hooks in PCI ops where appropriate. It also destroys the
vPHB when the physical card is removed.
Secondly, it add an in kernel API for AFU to use CXL. AFUs must present a
driver that firstly binds as a PCI device. This PCI device can then be using
to do CXL specific operations (that can't sit in the PCI ops) using this API.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The cxl kernel API will allow drivers other than cxl to export a file
descriptor which has the same userspace API. These file descriptors will be
able to be used against libcxl.
This exports those file ops for use by other drivers.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This moves the current include file from cxl.h -> cxl-base.h. This current
include file is used only to pass information between the base driver that
needs to be built into the kernel and the cxl module.
This is to make way for a new include/misc/cxl.h which will
contain just the kernel API for other driver to use
Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Cleanup Makefile by fixing line wrapping.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This reworks contexts lifetimes a bit to enable the kernel API where we may
want to reuse contexts. Here we will want to start and stop contexts without
freeing them.
Start context does the get pid & ctx so stop context will need to do the puts.
Here we move put pid & ctx to the detach context path which will become part of
the stop context path.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This updates AFU directed and dedicated modes for contexts attached to the
kernel.
The SR (similar to the MSR in the core) calculation is getting
quite complex and is duplicated in AFU directed and dedicated
modes. This patch also merges this SR calculation for these modes.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Split the afu_register_irqs() function so that different parts can
be useful elsewhere.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We only need to check the pid attached to this context for userspace contexts.
Kernel contexts can skip this check.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Export some symbols which will soon be used elsewhere in this driver.
Now they are global we rename them so to avoid collisions.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rename cxl_afu_reset() to __cxl_afu_reset() to we can reuse this function name
in the API.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rework __detach_context() and cxl_context_detach() so we can reuse them in the
kernel API.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add cookie parameter to afu_release_irqs() so that we can pass in a different
cookie than the context structure. This will be useful for other kernel
drivers that want to call this but get their own cookie back in the interrupt
handler.
Update all existing call sites.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Now that we parse the AFU Configuration record, dump some info on it when in
debug mode.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When probing we call pci_enable_device() but don't call pci_disable_device() on
fail. This causes refcounting issues in the PCI subsystem if a second driver
tries to bind to the same device.
This patch adds the pci_disable_device() to the probe error path. This error
path is hit when this cxl driver tries to bind to AFUs (on the vPHB) rather
than the physical device.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we expose AFUs as virtual PCI devices, they may look like the physical
CAPI PCI card. ie they may have the same vendor/device IDs.
We want to avoid these AFUs binding to this driver and any init this driver may
do.
Re-order card init to check the VSEC earlier before assigning BARs or
activating CXL. Also change the dev used in early prints as the adapter struct
may not be inited at this earlier stage.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Now that libcxl is public, let's document it.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds a hook into the powerpc pci code for pci_disable_device() calls. The
generic code already provides a weak pcibios_disable_device() symbol, so we
just need to provide our own in powerpc and it'll get picked up.
This is passed directly to the phb controller ops, provided one exists.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently pnv_pci_shutdown() calls the PHB shutdown code for all PHBs in the
system. It dereferences the private_data assuming it's a powernv PHB, which
won't be the case when we have different PHB in the systems (like when we add
vPHBs for CXL).
This moves the shutdown hook to the pci_controller_ops and fixes the call site
to use that instead.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add cxl context pointer to archdata. We'll want to create one of these for cxl
PCI devices. Put them here until we can get a pci_dev specific private data.
This location was suggested by benh.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add release_device() hook to phb ops so we can clean up for specific phbs.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Export pcibios_claim_one_bus, pcibios_scan_phb and pcibios_alloc_controller.
These will be used by the CXL driver.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This fixes calculating the key bits (KP and KS) in the SLB VSID for kernel
mappings.
I'm not CCing this to stable as there are no uses of this currently.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The afu fd release path was identified as a significant bottleneck in
the overall performance of cxl. While an optimal AFU design would
minimise the need to close & reopen the AFU fd, it is not always
practical to avoid.
The bottleneck seems to be down to the call to synchronize_rcu(), which
will block until every other thread is guaranteed to be out of an RCU
critical section. Replace it with call_rcu() to free the context
structures later so we can return to the application sooner.
This reduces the time spent in the fd release path from 13356 usec to
13.3 usec - about a 100x speed up.
Reported-by: Fei K Chen <uchen@cn.ibm.com>
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Export the "AFU Error Buffer" via sysfs attribute (afu_err_buf). AFU
error buffer is used by the AFU to report application specific
errors. The contents of this buffer are AFU specific and are intended to
be interpreted by the application interacting with the afu.
Suggested-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Given a file descriptor on an afu device, libcxl currently uses the
major/minor number obtained from fstat on the fd to construct path to
the afu's sysfs directory. However it is possible that rather than using
one of the device in /dev/cxl, a kernel driver creates its own device
which export generic cxl interface to the userspace. This causes
problems with libcxl as it tries to use a wrong major/minor number to
construct the sysfs path and fail.
So this patch introduces a new ioctl called CXL_IOCTL_GET_AFU_ID on the
afu file descriptor to fetch the cxl_afu_id struct that holds the
card/offset-id and mode information. These info is then used by libcxl to
construct the correct path to the afu sysfs directory.
Testing:
- Build against pseries be/le configs
- Testing with corresponding libcxl changes to verify that it constructs
right sysfs path to the afu.
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Scatter gather lists can be created with more available entries than are
actually used (e.g. using sg_init_table() to reserve a specific number
of sg entries, but in actuality using something less than that based on
the data length). The caller sometimes fails to mark the last entry
with sg_mark_end(). In these cases, sg_nents() will return the original
size of the sg list as opposed to the actual number of sg entries that
contain valid data.
On arm64, if the sg_nents() value is used in a call to dma_map_sg() in
this situation, then it causes a BUG_ON in lib/swiotlb.c because an
"empty" sg list entry results in dma_capable() returning false and
swiotlb trying to create a bounce buffer of size 0. This occurred in
the userspace crypto interface before being fixed by
0f477b655a ("crypto: algif - Mark sgl end at the end of data")
Protect against this by using the new sg_nents_for_len() function which
returns only the number of sg entries required to meet the desired
length and supplying that value to dma_map_sg().
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When performing a dma_map_sg() call, the number of sg entries to map is
required. Using sg_nents to retrieve the number of sg entries will
return the total number of entries in the sg list up to the entry marked
as the end. If there happen to be unused entries in the list, these will
still be counted. Some dma_map_sg() implementations will not handle the
unused entries correctly (lib/swiotlb.c) and execute a BUG_ON.
The sg_nents_for_len() function will traverse the sg list and return the
number of entries required to satisfy the supplied length argument. This
can then be supplied to the dma_map_sg() call to successfully map the
sg.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On architectures where flush_dcache_page is not needed, we will
end up generating all the code up to the PageSlab call. This is
because PageSlab operates on a volatile pointer and thus cannot
be optimised away.
This patch works around this by checking whether flush_dcache_page
is needed before we call PageSlab which then allows PageSlab to be
compiled awy.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change the nx-842 common driver to wait for loading of both platform
drivers, and fail loading if the platform driver pointer is not set.
Add an independent platform driver pointer, that the platform drivers
set if they find they are able to load (i.e. if they find their platform
devicetree node(s)).
The problem is currently, the main nx-842 driver will stay loaded even
if there is no platform driver and thus no possible way it can do any
compression or decompression. This allows the crypto 842-nx driver
to load even if it won't actually work. For crypto compression users
(e.g. zswap) that expect an available crypto compression driver to
actually work, this is bad. This patch fixes that, so the 842-nx crypto
compression driver won't load if it doesn't have the driver and hardware
available to perform the compression.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts rfc4106-gcm-aesni to the new AEAD interface.
The low-level interface remains as is for now because we can't
touch it until cryptd itself is upgraded.
In the conversion I've also removed the duplicate copy of the
context in the top-level algorithm. Now all processing is carried
out in the low-level __driver-gcm-aes-aesni algorithm.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
No new code should be using the return value of crypto_unregister_alg
as it will become void soon.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch ensures that the tfm context always has enough extra
memory to ensure that it is aligned according to cra_alignment.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that type-safe init/exit functions exist, they often need
to access the underlying aead_instance. So this patch adds the
helper aead_alg_instance to access aead_instance from a crypto_aead
object.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As it stands the only non-type safe functions left in the new
AEAD interface are the cra_init/cra_exit functions. It means
exposing the ugly __crypto_aead_cast to every AEAD implementor.
This patch adds type-safe init/exit functions to AEAD. Existing
algorithms are unaffected while new implementations can simply
fill in these two instead of cra_init/cra_exit.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
