Tegra194 supports maximum 64K bytes per packet including 12 bytes of
packet header irrespective of PIO or DMA mode transfer.
This patch updates Tegra194 max write length to account for packet
header size for transfers.
Cc: stable@vger.kernel.org # 4.20+
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Tegra186 and prior supports maximum 4K bytes per packet transfer
including 12 bytes of packet header.
This patch fixes max write length limit to account packet header
size for transfers.
Cc: stable@vger.kernel.org # 4.4+
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Bus clear feature of Tegra I2C controller helps to recover from
bus hang when I2C master loses the bus arbitration due to the
slave device holding SDA LOW continuously for some unknown reasons.
Per I2C specification, the device that held the bus LOW should
release it within 9 clock pulses.
During bus clear operation, Tegra I2C controller sends 9 clock
pulses and terminates the transaction with STOP condition.
Upon successful bus clear operation, bus goes to idle state and
driver retries the transaction.
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This patch sorts all the include headers alphabetically for the
I2C Tegra driver.
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Fanotify now uses exportfs_encode_inode_fh() so it needs to select
EXPORTFS.
Fixes: e9e0c89030 "fanotify: encode file identifier for FAN_REPORT_FID"
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Parav Pandit says:
====================
devlink: 2 fixes for devlink region read
This 2 patches consist of fixes for devlink region read handling.
v0->v1:
- Fixed typo from user to use
v1->v2:
- Rebased
====================
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While finding the devlink device during region reading,
devlink device list is accessed and devlink device is
returned without holding a lock. This could lead to use-after-free
accesses.
While at it, add lockdep assert to ensure that all future callers hold
the lock when calling devlink_get_from_attrs().
Fixes: 4e54795a27 ("devlink: Add support for region snapshot read command")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
devlink_nl_cmd_region_read_dumpit() misses to return right error code on
most error conditions.
Return the right error code on such errors.
Fixes: 4e54795a27 ("devlink: Add support for region snapshot read command")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is a little improvement. If user use the
command shown as below, we should print the info [1]
instead of [2]. The eth0 exists actually, and it may
confuse user.
$ echo "eth0" > /sys/class/net/bond4/bonding/slaves
[1] "bond4: no command found in slaves file - use +ifname or -ifname"
[2] "write error: No such device"
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When introducing the possibility for selecting if the common prefix to
options such as the waitid ones, i.e. all 'waitid' options start with
'W', so, to make it make it more compact if configured to suppress it,
'perf trace' will do so, other examples include mmap's PROT_ prefix for
its 'prot' argument, etc, which, when showing the syscall argument name
ends up producing duplicated info that clutters the screen, i.e.:
# perf trace -e mmap --max-events 2 sleep 1
0.000 ( 0.014 ms): sleep/20886 mmap(len: 112595, prot: PROT_READ, flags: MAP_PRIVATE, fd: 3) = 0x7f3e986d2000
0.041 ( 0.005 ms): sleep/20886 mmap(len: 8192, prot: PROT_READ|PROT_WRITE, flags: MAP_PRIVATE|MAP_ANONYMOUS) = 0x7f3e986d0000
#
So it is possible to suppress that and make it more compact by having
this in your ~/.perfconfig:
# cat ~/.perfconfig
[trace]
show_prefix = no
#
# perf trace -e mmap --max-events 2 sleep 1
0.000 ( 0.014 ms): sleep/8009 mmap(len: 112595, prot: READ, flags: PRIVATE, fd: 3) = 0x7ff2373de000
0.040 ( 0.005 ms): sleep/8009 mmap(len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS) = 0x7ff2373dc000
#
To have it look more like strace's output, we instead want to suppress
the arg name and show the prefix, so use:
# cat ~/.perfconfig
[trace]
show_prefix = yes
show_arg_names = no
#
# perf trace -e mmap --max-events 2 sleep 1
0.000 ( 0.006 ms): sleep/15513 mmap(NULL, 112595, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f7a9b6d3000
0.020 ( 0.002 ms): sleep/15513 mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS) = 0x7f7a9b6d1000
#
When this logic was introduced a bug came with it when processing the
waitid 'option' arg that ended up expecting 3 strings when just two were
being provided, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: c65c83ffe9 ("perf trace: Allow asking for not suppressing common string prefixes")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were crashing when processing a negative fd:
Program received signal SIGSEGV, Segmentation fault.
0x0000000000609bbf in syscall_arg__scnprintf_ioctl_cmd (bf=0x1172eca "", size=2038, arg=0x7fffffff8360) at trace/beauty/ioctl.c:182
182 if (file->dev_maj == USB_DEVICE_MAJOR)
Missing separate debuginfos, use: dnf debuginfo-install bzip2-libs-1.0.6-28.fc29.x86_64 elfutils-libelf-0.174-5.fc29.x86_64 elfutils-libs-0.174-5.fc29.x86_64 glib2-2.58.3-1.fc29.x86_64 libbabeltrace-1.5.6-1.fc29.x86_64 libunwind-1.2.1-6.fc29.x86_64 libuuid-2.32.1-1.fc29.x86_64 libxcrypt-4.4.3-2.fc29.x86_64 numactl-libs-2.0.12-1.fc29.x86_64 openssl-libs-1.1.1a-1.fc29.x86_64 pcre-8.42-6.fc29.x86_64 perl-libs-5.28.1-427.fc29.x86_64 popt-1.16-15.fc29.x86_64 python2-libs-2.7.15-11.fc29.x86_64 slang-2.3.2-4.fc29.x86_64 xz-libs-5.2.4-3.fc29.x86_64
(gdb) bt
#0 0x0000000000609bbf in syscall_arg__scnprintf_ioctl_cmd (bf=0x1172eca "", size=2038, arg=0x7fffffff8360) at trace/beauty/ioctl.c:182
#1 0x000000000048e295 in syscall__scnprintf_val (sc=0x123b500, bf=0x1172eca "", size=2038, arg=0x7fffffff8360, val=21519)
at builtin-trace.c:1594
#2 0x000000000048e60d in syscall__scnprintf_args (sc=0x123b500, bf=0x1172ec6 "-1, ", size=2042, args=0x7ffff6a7c034 "\377\377\377\377",
augmented_args=0x7ffff6a7c064, augmented_args_size=4, trace=0x7fffffffa8d0, thread=0x1175cd0) at builtin-trace.c:1661
#3 0x000000000048f04e in trace__sys_enter (trace=0x7fffffffa8d0, evsel=0xb260b0, event=0x7ffff6a7bfe8, sample=0x7fffffff84f0)
at builtin-trace.c:1880
#4 0x00000000004915a4 in trace__handle_event (trace=0x7fffffffa8d0, event=0x7ffff6a7bfe8, sample=0x7fffffff84f0) at builtin-trace.c:2590
#5 0x0000000000491eed in __trace__deliver_event (trace=0x7fffffffa8d0, event=0x7ffff6a7bfe8) at builtin-trace.c:2818
#6 0x0000000000492030 in trace__deliver_event (trace=0x7fffffffa8d0, event=0x7ffff6a7bfe8) at builtin-trace.c:2845
#7 0x0000000000492896 in trace__run (trace=0x7fffffffa8d0, argc=0, argv=0x7fffffffdb58) at builtin-trace.c:3040
#8 0x000000000049603a in cmd_trace (argc=0, argv=0x7fffffffdb58) at builtin-trace.c:3952
#9 0x00000000004d5103 in main (argc=1, argv=0x7fffffffdb58) at perf.c:474
(gdb) p fd
$1 = -1
(gdb) p file
$7 = (struct file *) 0xfffffffffffffff0
(gdb) p ((struct thread_trace *)arg->thread)->files.table + fd
$8 = (struct file *) 0xfffffffffffffff0
(gdb)
Check for that and return NULL instead.
This problem was introduced recently, the other codepaths leading to
thread_trace__files_entry() check for negative fds, like thread__fd_path(),
but we need to do it at thread_trace__files_entry() as more users are now
calling it directly.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 2d473389f8 ("perf trace beauty: Export function to get the files for a thread")
Link: https://lkml.kernel.org/n/tip-oq7bvaaf07gsd4yqty3107u2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is possible to pass a negative number as the fd and that has to be
handled, so stop using 'unsigned int fd' in the ioctl syscall 'cmd'
beautifier.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-b7qwa0l19dswa09h3s41akfu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we get all the tests in a single .c file for a first test,
tools/build/feature/test-all.c, if individual tests set that define and
fail to undef it at its end, then it the test-all.c build will fail due
to defining _GNU_SOURCE multiple times, getting us to the slow path,
so undef it at the end in tests that define it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-w6s00jfo1xabgphzczadl59b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Synthesizing BPF events is only supported for root. Silent warning msg
when non-root user runs perf-record.
Reported-by: David Carrillo-Cisneros <davidca@fb.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: David Carrillo-Cisneros <davidca@fb.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190204193140.719740-1-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Descriptions of metrics for POWER9 processors can be found in the
"POWER9 Performance Monitor Unit User’s Guide", which is currently
available on the "IBM Portal for OpenPOWER"
(https://www-355.ibm.com/systems/power/openpower/welcome.xhtml) at
https://www-355.ibm.com/systems/power/openpower/posting.xhtml?postingId=4948CDE1963C9BCA852582F800718190
This patch is for metric groups:
- branch_prediction
- instruction_stats_percent_per_ref
- latency
- lsu_rejects
- memory
- prefetch
- translation
Plus, some whitespace changes.
Signed-off-by: Paul Clarke <pc@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20190209181429.23950-4-pc@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Descriptions of metrics for POWER9 processors can be found in the
"POWER9 Performance Monitor Unit User’s Guide", which is currently
available on the "IBM Portal for OpenPOWER"
(https://www-355.ibm.com/systems/power/openpower/welcome.xhtml) at
https://www-355.ibm.com/systems/power/openpower/posting.xhtml?postingId=4948CDE1963C9BCA852582F800718190
This patch is for metric groups:
- dl1_reloads_percent_per_inst
- dl1_reloads_percent_per_ref
- instruction_misses_percent_per_inst
- l2_stats
- l3_stats
- pteg_reloads_percent_per_inst
- pteg_reloads_percent_per_ref
Signed-off-by: Paul Clarke <pc@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20190209181429.23950-3-pc@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
POWER8 metrics are not well publicized. Some are here:
https://www.ibm.com/support/knowledgecenter/en/SSFK5S_2.2.0/com.ibm.cluster.pedev.v2r2.pedev100.doc/bl7ug_derivedmetricspower8.htm
This patch is for metric groups:
- branch_prediction
- latency
- bus_stats
- instruction_mix
- instruction_stats_percent_per_ref
Signed-off-by: Paul Clarke <pc@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20190207175314.31813-4-pc@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
POWER8 metrics are not well publicized.
Some are here:
https://www.ibm.com/support/knowledgecenter/en/SSFK5S_2.2.0/com.ibm.cluster.pedev.v2r2.pedev100.doc/bl7ug_derivedmetricspower8.htm
This patch is for metric groups:
- dl1_reloads_percent_per_inst
- dl1_reloads_percent_per_ref
- instruction_misses_percent_per_inst
- l2_stats
- lsu_rejects
- memory
- pteg_reloads_percent_per_inst
- pteg_reloads_percent_per_ref
Signed-off-by: Paul Clarke <pc@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20190207175314.31813-3-pc@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On IBM z13 machine types 2964 and 2965 the descriptor
sizes for sampling and diagnostic sampling entries
might be missing in the trailer entry and are set to zero.
This leads to a perf report failure when processing diagnostic
sampling entries.
This patch adds missing descriptor sizes when the trailer entry
contains zero for these fields.
Output before:
[root@s38lp82 perf]# ./perf report --stdio | fgrep Samples
0xabbf0 [0x8]: failed to process type: 68
Error:
failed to process sample
[root@s38lp82 perf]#
Output after:
[root@s38lp82 perf]# ./perf report --stdio | fgrep Samples
# Total Lost Samples: 0
# Samples: 3K of event 'SF_CYCLES_BASIC_DIAG'
# Samples: 162 of event 'CF_DIAG'
[root@s38lp82 perf]#
Fixes: 2b1444f2e2 ("perf report: Add raw report support for s390 auxiliary trace")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20190211100627.85714-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After 'commit e22c1c7511 ("perf thread: Don't include symbol.h,
symbol_conf.h is enough")'
Compilation of the perf tools is broken when using the functionality
provided by the openCSD library:
[...]
... timerfd: [ on ]
... sched_getcpu: [ on ]
... sdt: [ OFF ]
... setns: [ on ]
... libopencsd: [ on ]
[...]
CC util/arm-spe.o
CC util/arm-spe-pkt-decoder.o
CC util/s390-cpumsf.o
CC util/cs-etm.o
CC util/parse-branch-options.o
util/cs-etm.c: In function ‘cs_etm__mem_access’:
util/cs-etm.c:297:24: error: storage size of ‘al’ isn’t known
struct addr_location al;
And rightly so since file cs-etm.c doesn't include symbol.h, something
that is rectified in this patch.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki K Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190208223543.31836-1-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
au_verfsize will be needed for a non-flavor-specific computation
in a subsequent patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When np is NULL i2s_pdata could also be NULL but i2s_pdata is now being
dereferenced without proper check. Fix this and shorten the error message
so we don't exceed 80 characters limit.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is now no users of this flag so remove it together with
related code. The chan_name field of snd_dmaengine_dai_dma_data
data structure is not removed as it is still in use by the PXA
platform.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Populate ->get_features() dw_pcie_ep_ops to return the EPC features
supported by Cadence PCIe endpoint controller.
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Populate ->get_features() dw_pcie_ep_ops to return the EPC features
supported by Rockchip PCIe endpoint controller.
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Populate ->get_features() dw_pcie_ep_ops to return the EPC features
supported by DRA7xx PCIe endpoint controller.
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Populate ->get_features() dw_pcie_ep_ops to return the EPC features
supported by Designware PCIe endpoint controller.
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Each platform using Designware PCIe core can support different set of
endpoint features. Add a new callback function ->get_features() in
dw_pcie_ep_ops so that each platform using Designware PCIe core can
advertise its supported features to the endpoint function driver.
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Add a new pci_epc_ops ->get_features() to get the features
supported by the EPC. Since EPC can provide different features to
different functions, the ->get_features() ops takes _func_no_ as
an argument.
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Commit ca83b4a7f2 ("x86/KVM/VMX: Add find_msr() helper function")
introduces the helper function find_msr(), which returns -ENOENT when
not find the msr in vmx->msr_autoload.guest/host. Correct checking contion
of no more available entry in vmx->msr_autoload.
Fixes: ca83b4a7f2 ("x86/KVM/VMX: Add find_msr() helper function")
Cc: stable@vger.kernel.org
Signed-off-by: Xiaoyao Li <xiaoyao.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some Posted-Interrupts from passthrough devices may be lost or
overwritten when the vCPU is in runnable state.
The SN (Suppress Notification) of PID (Posted Interrupt Descriptor) will
be set when the vCPU is preempted (vCPU in KVM_MP_STATE_RUNNABLE state but
not running on physical CPU). If a posted interrupt comes at this time,
the irq remapping facility will set the bit of PIR (Posted Interrupt
Requests) but not ON (Outstanding Notification). Then, the interrupt
will not be seen by KVM, which always expects PID.ON=1 if PID.PIR=1
as documented in the Intel processor SDM but not in the VT-d specification.
To fix this, restore the invariant after PID.SN is cleared.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Certain NFS results (eg. READLINK) might expect a data payload that
is not an exact multiple of 4 bytes. In this case, XDR encoding
is required to pad that payload so its length on the wire is a
multiple of 4 bytes. The constants that define the maximum size of
each NFS result do not appear to account for this extra word.
In each case where the data payload is to be received into pages:
- 1 word is added to the size of the receive buffer allocated by
call_allocate
- rpc_inline_rcv_pages subtracts 1 word from @hdrsize so that the
extra buffer space falls into the rcv_buf's tail iovec
- If buf->pagelen is word-aligned, an XDR pad is not needed and
is thus removed from the tail
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
read ROHM BD71837 / BD71847 specific device tree bindings for
controlling the PMIC shutdown/reset states and voltages for
different HW states. The PMIC was designed to be used with NXP
i.MX8 SoC and it supports SNVS low power state which seems to
be typical for NXP i.MX SoCs. However, when SNVS is used we must
not allow SW to control enabling/disabling those regulators which
are crucial for system to boot as there is a HW limitation which
causes SW controlled regulators to be kept shut down after SNVS
reset.
Allow setting the SNVS to be used as reset target state and allow
marking those regulators which are critical for boot.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Tested-by: Angus Ainslie <angus@akkea.ca>
Reviewed-by: Angus Ainslie <angus@akkea.ca>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add regulator_desc_list_voltage_linear_range which can be used
by drivers for getting the voltages before regulator is registered.
This may be useful for drivers which need to fetch the voltage
selectors at device-tree parsing callback.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: Angus Ainslie <angus@akkea.ca>
Reviewed-by: Angus Ainslie <angus@akkea.ca>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add ROHM BD71837 / BD71847 specific device tree bindings for
controlling the PMIC shutdown/reset states and voltages for
different HW states. The PMIC was designed to be used with NXP
i.MX8 SoC and it supports SNVS low power state which seems to
be typical for NXP i.MX SoCs. However, when SNVS is used we must
not allow SW to control enabling/disabling those regulators which
are crucial for system to boot as there is a HW limitation which
causes SW controlled regulators to be kept shut down after SNVS
reset.
Allow setting the SNVS to be used as reset target state and allow
marking those regulators which are critical for boot.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Tested-by: Angus Ainslie <angus@akkea.ca>
Reviewed-by: Angus Ainslie <angus@akkea.ca>
Signed-off-by: Mark Brown <broonie@kernel.org>
prepare_reply_buffer() and its NFSv4 equivalents expose the details
of the RPC header and the auth slack values to upper layer
consumers, creating a layering violation, and duplicating code.
Remedy these issues by adding a new RPC client API that hides those
details from upper layers in a common helper function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Files under net/sunrpc/auth_gss/ do not yet have SPDX ID tags.
This directory is somewhat complicated because most of these files
have license boilerplate that is not strictly GPL 2.0.
In this patch I add ID tags where there is an obvious match. The
less recognizable licenses are still under research.
For reference, SPDX IDs added in this patch correspond to the
following license text:
GPL-2.0 https://spdx.org/licenses/GPL-2.0.html
GPL-2.0+ https://spdx.org/licenses/GPL-2.0+.html
BSD-3-Clause https://spdx.org/licenses/BSD-3-Clause.html
Cc: Simo Sorce <simo@redhat.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The previous implementatation was restrictive with regards to
BCLK rates for slave mode where the driver would not allow rates
the codec couldn't provide itself as clock master. The codec
is able to automatically determine and handle whatever rate is
provided so this restriction isn't necessary for slave mode. The
code was also flawed with regards to setting of the frame offset
as using rx_mask to explicitly set the offset has the knock on
effect of impacting the min and max channels for the codec, in
soc_pcm_hw_params() through the call to
soc_pcm_codec_params_fixup().
With this update, the driver now only limits frame size if codec
is clock master, and dynamically determines the BCLK offset
relating to WCLK using the tx_mask for slot offset along with the
slot width provided.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously the driver would default the BCLK periods per WCLK to
64, to cover all possible non-TDM scenarios when the codec was
DAI clock master. However some devices require a lower BCLK rate
to operate correctly so with this in mind, this commit updates
the code to be more dynamic, with BCLK rate now based on SR and
word length provided to hw_params().
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As a result of exporting the bd70528 specific locking functions
we no longer need struct bd70528. Remove references to
struct bd70528 from bd70528 regulator.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Spelling error fixes, upper/lower case letter changes.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Change indentation so this macro definition spans 2 rows and looks
more consistent with surrounding code.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The key action of xdr_buf_trim() is that it shortens buf->len, the
length of the xdr_buf's content. The other actions -- shortening the
head, pages, and tail components -- are actually not necessary. In
particular, changing the size of those components can corrupt the
RPC message contained in the buffer. This is an accident waiting to
happen rather than a current bug, as far as we know.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Bruce Fields <bfields@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
