Rather than having separate definitions for each engine, create a single
parameterized macro that takes the engine base offset. This will also
ensure we get to the proper offset if we ever need to use these
registers on newer platforms (where the media engine offsets have
changed).
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-3-matthew.d.roper@intel.com
Since we have an engine-parameterized macro GEN8_RING_CS_GPR, let's use
that in place of the HSW_CS_GPR and BCS_GPR register definitions.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-2-matthew.d.roper@intel.com
Updated new values from BSPEC.
Bspec: 53920
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110234520.6836-1-clinton.a.taylor@intel.com
Add a dedicated file vlv_sideband_reg.h for the VLV/CHV sideband
registers. The sideband registers macros are needed by the same files
that need vlv_sideband.h, so include the definitions from there.
v2: Fix copyright year (Matt)
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110095740.166078-2-jani.nikula@intel.com
Check return pointer from intel_crtc_for_plane() before dereferencing
it, as it can be NULL.
v2: Moved the NULL check into intel_crtc_active().
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Caz Yokoyama <caz.yokoyama@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217160255.1300348-1-harish.chegondi@intel.com
The ACPI OpRegion Mailbox #5 ASLE extension may contain an EDID to be
used for the embedded display. Add support for using it via by adding
the EDID to the list of available modes on the connector, and use it for
eDP when available.
If a panel's EDID is broken, there may be an override EDID set in the
ACPI OpRegion mailbox #5. Use it if available.
Fixes the GPD Win Max display.
Based on original patch series by: Jani Nikula <jani.nikula@intel.com>
https://patchwork.kernel.org/project/intel-gfx/patch/20200828061941.17051-1-jani.nikula@intel.com/
Changes:
- EDID is copied and validated with drm_edid_is_valid
- EDID is now only used as a fallback.
- squashed the two patches
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Anisse Astier <anisse@astier.eu>
Link: https://patchwork.freedesktop.org/patch/msgid/20211229222200.53128-2-anisse@astier.eu
acpi_dev_get_resources() does perform the NULL pointer check against
ACPI companion device which is given as function parameter. Thus,
there is no need to duplicate this check in the caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222154033.6770-1-andriy.shevchenko@linux.intel.com
If VBT size is not a multiple of 4, the last 4-byte store will be out of
bounds of the allocated buffer. Spotted with KASAN. Round up the
allocation size.
v2: Use round_up() intead of roundup() as it's a power of 2 (Thomas)
Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: a36e7dc0af ("drm/i915/dg1: Read OPROM via SPI controller")
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222081654.1843211-1-jani.nikula@intel.com
Remove the counterproductive CONFIG_DEBUG_FS ifdef and just include
the debugfs dentry in drm_crtc always. This way we don't need
annoying ifdefs in the actual code with DEBUGFS=n. Also we don't
have these ifdefs around any of the other debugfs dentries either
so can't see why drm_crtc should be special.
This fixes the i915 DEBUGFS=n build because I assumed the dentry
would always be there.
Cc: Jani Nikula <jani.nikula@intel.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Fixes: e74c6aa955 ("drm/i915/fbc: Register per-crtc debugfs files")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211221193754.12287-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Adding PCI device ids and enabling ADL-N platform.
ADL-N from i915 point of view is subplatform of ADL-P.
BSpec: 68397
Changes since V2:
- Added version log history
Changes since V1:
- replace IS_ALDERLAKE_N with IS_ADLP_N - Jani Nikula
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211210051802.4063958-1-tejaskumarx.surendrakumar.upadhyay@intel.com
Read OPROM SPI through MMIO and find VBT entry since we can't use
OpRegion and PCI mapping may not work on some systems due to most BIOSes
not leaving the Option ROM mapped.
v2: Remove message with allocation failure
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211216062645.3477854-1-lucas.demarchi@intel.com
The intel_gmbus_set_speed() function is not used anywhere, remove it.
Note drivers/gpu/drm/gma500 has its own copy called
gma_intel_gmbus_set_speed() which is used, the intel_gmbus_set_speed()
version in the i915 code is not used at all
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211121191001.252076-1-hdegoede@redhat.com
At least the Bay Trail LPSS PWM controller used with DSI panels on many
Bay Trail tablets seems to leave the PWM pin in whatever state it was
(high or low) ATM that the PWM gets disabled. Combined with some panels
not having a separate backlight-enable pin this leads to the backlight
sometimes staying on while it should not (when the pin was high during
PWM-disabling).
First calling intel_backlight_set_pwm_level() will ensure that the pin
is always low (or high for inverted brightness panels) since the passed
in duty-cycle is 0% (or 100%) when the PWM gets disabled fixing the
backlight sometimes staying on.
With the exception of ext_pwm_disable_backlight() all other
foo_disable_backlight() functions call intel_backlight_set_pwm_level()
already before disabling the backlight, so this change also aligns
ext_pwm_disable_backlight() with all the other disable() functions.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211121110032.4720-2-hdegoede@redhat.com
Expose FBC debugfs files for each crtc. These may or may not point
to the same FBC instance depending on the platform.
We leave the old global debugfs files in place until
igt catches up to the new per-crtc approach.
v2: Take a trip via intel_crtc_debugfs_add() (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213151435.9700-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Declare which FBC instances are present via a fbc_mask
in device info. For the moment there is just the one.
TODO: Need to figure out how to expose multiple FBC
instances in debugs. Just different file names, or move
the files under some subdirectory (per-crtc maybe), or
something else? This will need igt changes as well.
v2: Put the mask into device_info.display (Jani)
Put the magic pipe->fbc thing into skl_fbc_id_for_pipe() (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213134450.3082-4-ville.syrjala@linux.intel.com
Convert i915->fbc into an array in preparation for
multiple FBC instances, and loop through all instances
in all places where the caller does not know which
instance(s) (if any) are relevant. This is the case
for eg. frontbuffer tracking and FIFO underrun hadling.
v2: More intel_ namespace (Jani)
Leave out debugfs for later
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213134450.3082-3-ville.syrjala@linux.intel.com
intel_cdclk.h only needs i915_drv.h for struct intel_cdclk_config. Move
the definition to intel_cdclk.h and turn the includes around to avoid
including i915_drv.h from other headers.
The intel cdclk state macros in intel_cdclk.h still reference struct
drm_i915_private, but as macros they don't strictly require the
definition until they are used.
v2: Expand on the commit message wrt cdclk state macros
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213114106.296017-1-jani.nikula@intel.com
intel_device_info.h references struct pci_dev but does not ensure that
the struct has been declared, causing build failures if something in
other headers changes so that the implicit dependency it is relying on
is no longer satisfied:
In file included from drivers/gpu/drm/i915/intel_device_info.h:32,
from drivers/gpu/drm/i915/gt/uc/intel_uc_fw.h:11,
from drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c:11:
drivers/gpu/drm/i915/display/intel_display.h:643:39: error: 'struct pci_dev' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
643 | bool intel_modeset_probe_defer(struct pci_dev *pdev);
| ^~~~~~~
cc1: all warnings being treated as errors
Add a declaration of the struct to fix this.
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes: 94b541f53d ("drm/i915: Add intel_modeset_probe_defer() helper")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213170753.3680209-1-broonie@kernel.org
Collect the dipslay related mask under the display sub-structure
in intel_device_info.
Note that there is a slight change in behaviour in that we zero
out .display entirely when !HAS_DISPLAY (aka. pipe_mask==0), so
now we also zero out the other masks (although cpu_transocder_mask
should already be zero of pipe_mask is zero). abox_mask is
only used by the display core init when HAS_DISPLAY is true, so
the actual behaviour of the system shouldn't change despite the
zeroing of these masks.
There is a lot more display stuff directly in device info that
could be moved over. Maybe someone else will be inspired to do it...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211210122726.12577-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
smatch warning:
drivers/gpu/drm/i915/display/intel_dmc.c:601 parse_dmc_fw() warn:
unsigned 'fw->size - offset' is never less than zero
Firmware size is size_t and offset is u32. So the subtraction is
unsigned which can never be less than zero.
Fixes: 3d5928a168 ("drm/i915/xelpd: Pipe A DMC plugging")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211210044129.12422-1-harshit.m.mogalapalli@oracle.com
Add support for eDP panels with a built-in privacy screen using the
new drm_privacy_screen class.
Changes in v3:
- Move drm_privacy_screen_get() call to intel_ddi_init_dp_connector()
Changes in v2:
- Call drm_connector_update_privacy_screen() from
intel_enable_ddi_dp() / intel_ddi_update_pipe_dp() instead of adding a
for_each_new_connector_in_state() loop to intel_atomic_commit_tail()
- Move the probe-deferral check to the intel_modeset_probe_defer() helper
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-11-hdegoede@redhat.com
The upcoming privacy-screen support adds another check for
deferring probe till some other drivers have bound first.
Factor out the current vga_switcheroo_client_probe_defer() check
into an intel_modeset_probe_defer() helper, so that further
probe-deferral checks can be added there.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-10-hdegoede@redhat.com
Add display/intel_display_trace.[ch] for defining display
tracepoints. The main goal is to reduce cross-includes between gem and
display. It would be possible split up tracing even further, but that
would lead to more boilerplate.
We end up having to include intel_crtc.h in a few places because it was
pulled in implicitly via intel_de.h -> i915_trace.h -> intel_crtc.h, and
that's no longer the case.
There should be no changes to tracepoints.
v3:
- Rebase
v2:
- Define TRACE_INCLUDE_PATH relative to define_trace.h (Chris)
- Remove useless comments (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7862ad764fbd0748d903c76bc632d3d277874e5b.1638961423.git.jani.nikula@intel.com
Follow the style that seems to be prevalent in kernel for undef and
define of TRACE_SYSTEM, TRACE_INCLUDE_PATH, and TRACE_INCLUDE_FILE.
There should be no changes to tracepoints.
v2: Keep TRACE_INCLUDE_PATH relative to define_trace.h (Chris)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0d37790ee70fb60be6f6a73d8bde2013510a7ad8.1638961423.git.jani.nikula@intel.com
Changes since v2.12:
- Release notes for v2.13:
1. Fix for simple flip queue with DC6v
- Release notes for v2.14:
1. Fix for flip queue roll over cases with DC6v
2. Enhancement for residency
3. Workaround for 3Dlut restore issue
v2: Commit message update (Imre)
Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211208213115.1919503-1-lucas.demarchi@intel.com
