With the RT_TRACE print removed, the rtw_wx_set_freq function is now
empty.
This function should be removed. At the moment, the setfreq ioctl
returns success to the caller although the frequency wasn't set.
It makes more sense to inform callers that this driver does not
support setfreq.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210807153636.11712-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should use the standard mechanism for debug prints. Remove the prints
that use driver-specific macros.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210807153636.11712-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should use the standard mechanism for debug prints. Remove the prints
that use driver-specific macros.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210807153636.11712-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should use the standard mechanism for debug prints. Remove the prints
that use driver-specific macros.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210807153636.11712-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fix sizes of tx power tables to the real used
values (i.e. 2 bandwidth, 3 rate sections).
Delete MAX_BASE_NUM_IN_PHY_REG_PG_2_4 macro in
this process, for it expands to a larger than
needed rate section index value.
Modify comments accordingly.
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/5f52295a8b17f68ad80ffb7b6301da83bfc11a68.1628329348.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
use MAX_RF_PATH_NUM as ceiling to rf path index.
Only 2 rf paths are used, not 4. Remove also
TX_POWER_BY_RATE_NUM_RF left unused.
Use RF_PATH_A as loop starting point instead of
hardcoded 0, as in other places.
Related comments modified accordingly.
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/88da23cef57131b39a63b2757b91f959553dd65d.1628329348.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtl8723bs support only two rf paths (A and B), remove all
the others (C, D, BC, ...) as they are unused. Keep
just one enum selecting rf path, remove unused macro
indicating max rf path number, add an item in rf_path
enum for this pourpose.
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/23060c85ab9aa468c9c021378f0dc8a8f887a578.1628329348.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
do some code cleaning after changes of previous commit.
Fixed comments, camel case names, variable naming conventions;
kept function names without chip series numbers (this is
just code for 8723), fixed indentations, blank lines and
other minor stuff.
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/2bddef34cebdf35666d8abec4462c1a8d30c8c60.1628329348.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In routine c2h_wk_callback(() following a kmalloc() call, the
error recovery is flawed. If the kmalloc() returns a pointer
that is not NULL, and the following c2h_evt_read() fails, the
code will leak that buffer. If the kmalloc() fails, a NULL
dereference will occur in the following code.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20210806213235.22349-1-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.
Adjust memcpy() destination to be the named structure itself, rather than
the first member, allowing memcpy() to correctly reason about the size.
"objdump -d" shows no object code changes.
Cc: Ross Schmidt <ross.schm.dev@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: devel@driverdev.osuosl.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210806201422.2871679-1-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.
Split the 3 addr memcpy() into 3 memcpy() calls so the compiler doesn't
think an overflowing memcpy() happens against the addr1 field (the
neighbors are intended to be copied as well).
ieee80211_read_qos_param_element() copies a struct ieee80211_info_element
into a struct ieee80211_qos_information_element, but is actually wanting to
copy into the larger struct ieee80211_qos_parameter_info (the contents of
ac_params_record[] is later examined). Refactor the routine to perform
centralized checks, and copy the entire contents directly (since the id
and len members match the elementID and length members):
struct ieee80211_info_element {
u8 id;
u8 len;
u8 data[];
} __packed;
struct ieee80211_qos_information_element {
u8 elementID;
u8 length;
u8 qui[QOS_OUI_LEN];
u8 qui_type;
u8 qui_subtype;
u8 version;
u8 ac_info;
} __packed;
struct ieee80211_qos_parameter_info {
struct ieee80211_qos_information_element info_element;
u8 reserved;
struct ieee80211_qos_ac_parameter ac_params_record[QOS_QUEUE_NUM];
} __packed;
Additionally replace old-style zero-element arrays with flexible arrays.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Pascal Terjan <pterjan@google.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: devel@driverdev.osuosl.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210806201208.2871467-1-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.
Split the 3 addr memcpy() into 3 memcpy() calls so the compiler doesn't
think an overflowing memcpy() happens against the addr1 field (the
neighbors are intended to be copied as well).
rtllib_read_qos_param_element() copies a struct rtllib_info_element
into a struct rtllib_qos_information_element, but is actually wanting to
copy into the larger struct rtllib_qos_parameter_info (the contents of
ac_params_record[] is later examined). Refactor the routine to perform
centralized checks, and copy the entire contents directly (since the id
and len members match the elementID and length members):
struct rtllib_info_element {
u8 id;
u8 len;
u8 data[];
} __packed;
struct rtllib_qos_information_element {
u8 elementID;
u8 length;
u8 qui[QOS_OUI_LEN];
u8 qui_type;
u8 qui_subtype;
u8 version;
u8 ac_info;
} __packed;
struct rtllib_qos_parameter_info {
struct rtllib_qos_information_element info_element;
u8 reserved;
struct rtllib_qos_ac_parameter ac_params_record[QOS_QUEUE_NUM];
} __packed;
Cc: Darshan D V <darshandv10@gmail.com>
Cc: Aditya Srivastava <yashsri421@gmail.com>
Cc: devel@driverdev.osuosl.org
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210806201106.2871169-1-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add some details to the Kconfig definitions of $CONFIG_VCHIQ_CDEV and
$CONFIG_BCM2835_VCHIQ to help make the motive behind the configs a bit
more clear.
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Ojaswin Mujoo <ojaswin98@gmail.com>
Link: https://lore.kernel.org/r/ab88d3222088aca29a319147b50a9d1e9f0f8b81.1627925241.git.ojaswin98@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before $CONFIG_VCHIQ_CDEV was defined, the vchiq cdev used to be created
unconditionally when CONFIG_BCM2835_VCHIQ=y. When an earlier commit
introduced the new config, its default behavior was set to disabled,
which might surprise some unsuspecting users. Hence, modify
CONFIG_BCM2835_VCHIQ to imply CONFIG_VCHIQ_CDEV
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Ojaswin Mujoo <ojaswin98@gmail.com>
Link: https://lore.kernel.org/r/da53207b24bc37f166b05c6835087becdc6b5b4d.1627925241.git.ojaswin98@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Prevent a memory ordering issue in the timer expiry code which makes it
possible to observe falsely that the callback has been executed already
while that's not the case, which violates the guarantee of del_timer_sync().
-----BEGIN PGP SIGNATURE-----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=JQWW
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single timer fix:
- Prevent a memory ordering issue in the timer expiry code which
makes it possible to observe falsely that the callback has been
executed already while that's not the case, which violates the
guarantee of del_timer_sync()"
* tag 'timers-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Move clearing of base::timer_running under base:: Lock
- Prevent a double enqueue caused by rt_effective_prio() being invoked
twice in __sched_setscheduler().
-----BEGIN PGP SIGNATURE-----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=EZjT
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single scheduler fix:
- Prevent a double enqueue caused by rt_effective_prio() being
invoked twice in __sched_setscheduler()"
* tag 'sched-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/rt: Fix double enqueue caused by rt_effective_prio
- Correct the permission checks for perf event which send SIGTRAP to a
different process and clean up that code to be more readable.
- Prevent an out of bound MSR access in the x86 perf code which happened
due to an incomplete limiting to the actually available hardware
counters.
- Prevent access to the AMD64_EVENTSEL_HOSTONLY bit when running inside a
guest.
- Handle small core counter re-enabling correctly by issuing an ACK right
before reenabling it to prevent a stale PEBS record being kept around.
-----BEGIN PGP SIGNATURE-----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=hhv+
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A set of perf fixes:
- Correct the permission checks for perf event which send SIGTRAP to
a different process and clean up that code to be more readable.
- Prevent an out of bound MSR access in the x86 perf code which
happened due to an incomplete limiting to the actually available
hardware counters.
- Prevent access to the AMD64_EVENTSEL_HOSTONLY bit when running
inside a guest.
- Handle small core counter re-enabling correctly by issuing an ACK
right before reenabling it to prevent a stale PEBS record being
kept around"
* tag 'perf-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Apply mid ACK for small core
perf/x86/amd: Don't touch the AMD64_EVENTSEL_HOSTONLY bit inside the guest
perf/x86: Fix out of bound MSR access
perf: Refactor permissions check into perf_check_permission()
perf: Fix required permissions if sigtrap is requested
Here are some small char/misc driver fixes for 5.14-rc5.
They resolve a few regressions that people reported:
- acrn driver fix
- fpga driver fix
- interconnect tiny driver fixes
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYQ+oWw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymihQCglZZdlg1HFVLx6zBvIR5cOAODRwkAoJgOMVnl
ngKziJBQqPHbT1KE49Uz
=jFHY
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for 5.14-rc5.
They resolve a few regressions that people reported:
- acrn driver fix
- fpga driver fix
- interconnect tiny driver fixes
All have been in linux-next for a while with no reported issues"
* tag 'char-misc-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
interconnect: Fix undersized devress_alloc allocation
interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate
interconnect: qcom: icc-rpmh: Ensure floor BW is enforced for all nodes
fpga: dfl: fme: Fix cpu hotplug issue in performance reporting
virt: acrn: Do hcall_destroy_vm() before resource release
interconnect: Always call pre_aggregate before aggregate
interconnect: Zero initial BW after sync-state
Here are 3 tiny driver core and firmware loader fixes for 5.14-rc5.
They are:
- driver core fix for when probing fails
- firmware loader fixes for reported problems.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYQ+8JQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymIQwCfYqUdpxPvUxe6/EWlOVLm6cpUASgAoI2rWoo9
ot6ywUCioFv4ehVzVtKc
=c5WG
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are three tiny driver core and firmware loader fixes for
5.14-rc5. They are:
- driver core fix for when probing fails
- firmware loader fixes for reported problems.
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
firmware_loader: fix use-after-free in firmware_fallback_sysfs
firmware_loader: use -ETIMEDOUT instead of -EAGAIN in fw_load_sysfs_fallback
drivers core: Fix oops when driver probe fails
Here are a few small staging driver fixes for 5.14-rc5 to resolve some
reported problems. They include:
- mt7621 driver fix
- rtl8723bs driver fixes
- rtl8712 driver fixes.
Nothing major, just small problems resolved.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYQ+9kQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylsOwCcDMdcfuu1KI/gwuUwqvYqe+tJ8cUAn3oQSwV7
aGb+wVJbgoXM0MFknrdA
=B3Gi
-----END PGP SIGNATURE-----
Merge tag 'staging-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are a few small staging driver fixes for 5.14-rc5 to resolve some
reported problems. They include:
- mt7621 driver fix
- rtl8723bs driver fixes
- rtl8712 driver fixes.
Nothing major, just small problems resolved.
All have been in linux-next for a while with no reported issues"
* tag 'staging-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: mt7621-pci: avoid to re-disable clock for those pcies not in use
staging: rtl8712: error handling refactoring
staging: rtl8712: get rid of flush_scheduled_work
staging: rtl8723bs: select CONFIG_CRYPTO_LIB_ARC4
staging: rtl8723bs: Fix a resource leak in sd_int_dpc
Here are some small tty/serial driver fixes for 5.14-rc5 to resolve a
number of reported problems.
They include:
- mips serial driver fixes
- 8250 driver fixes for reported problems
- fsl_lpuart driver fixes
- other tiny driver fixes
All have been in linux-next for a while with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYQ++cg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylzoQCcC2zlnRRex48ovvh/b4JtKgImP6IAn2wR2Ag+
tSpMfooJBaT5a9kcg+Vr
=U7hC
-----END PGP SIGNATURE-----
Merge tag 'tty-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty/serial driver fixes for 5.14-rc5 to resolve a
number of reported problems.
They include:
- mips serial driver fixes
- 8250 driver fixes for reported problems
- fsl_lpuart driver fixes
- other tiny driver fixes
All have been in linux-next for a while with no reported problems"
* tag 'tty-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_pci: Avoid irq sharing for MSI(-X) interrupts.
serial: 8250_mtk: fix uart corruption issue when rx power off
tty: serial: fsl_lpuart: fix the wrong return value in lpuart32_get_mctrl
serial: 8250_pci: Enumerate Elkhart Lake UARTs via dedicated driver
serial: 8250: fix handle_irq locking
serial: tegra: Only print FIFO error message when an error occurs
MIPS: Malta: Do not byte-swap accesses to the CBUS UART
serial: 8250: Mask out floating 16/32-bit bus bits
serial: max310x: Unprepare and disable clock in error path
Here are some small USB driver fixes for 5.14-rc5. They resolve a
number of small reported issues, including:
- cdnsp driver fixes
- usb serial driver fixes and device id updates
- usb gadget hid fixes
- usb host driver fixes
- usb dwc3 driver fixes
- other usb gadget driver fixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYQ+/ow8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymdLACeMlXNPA5S/YJd+vak0Oer1mjNQWkAoJAZKLEN
bvN1v5wYjPs0mIFJUwj0
=xb57
-----END PGP SIGNATURE-----
Merge tag 'usb-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for 5.14-rc5. They resolve a
number of small reported issues, including:
- cdnsp driver fixes
- usb serial driver fixes and device id updates
- usb gadget hid fixes
- usb host driver fixes
- usb dwc3 driver fixes
- other usb gadget driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits)
usb: typec: tcpm: Keep other events when receiving FRS and Sourcing_vbus events
usb: dwc3: gadget: Avoid runtime resume if disabling pullup
usb: dwc3: gadget: Use list_replace_init() before traversing lists
USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2
USB: serial: pl2303: fix GT type detection
USB: serial: option: add Telit FD980 composition 0x1056
USB: serial: pl2303: fix HX type detection
USB: serial: ch341: fix character loss at high transfer rates
usb: cdnsp: Fix the IMAN_IE_SET and IMAN_IE_CLEAR macro
usb: cdnsp: Fixed issue with ZLP
usb: cdnsp: Fix incorrect supported maximum speed
usb: cdns3: Fixed incorrect gadget state
usb: gadget: f_hid: idle uses the highest byte for duration
Revert "thunderbolt: Hide authorized attribute if router does not support PCIe tunnels"
usb: otg-fsm: Fix hrtimer list corruption
usb: host: ohci-at91: suspend/resume ports after/before OHCI accesses
usb: musb: Fix suspend and resume issues for PHYs on I2C and SPI
usb: gadget: f_hid: added GET_IDLE and SET_IDLE handlers
usb: gadget: f_hid: fixed NULL pointer dereference
usb: gadget: remove leaked entry from udc driver list
...
-----BEGIN PGP SIGNATURE-----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=FAeG
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.14-2021-08-07' of git://git.kernel.dk/linux-block
Pull io_uring from Jens Axboe:
"A few io-wq related fixes:
- Fix potential nr_worker race and missing max_workers check from one
path (Hao)
- Fix race between worker exiting and new work queue (me)"
* tag 'io_uring-5.14-2021-08-07' of git://git.kernel.dk/linux-block:
io-wq: fix lack of acct->nr_workers < acct->max_workers judgement
io-wq: fix no lock protection of acct->nr_worker
io-wq: fix race between worker exiting and activating free worker
* A fix to avoid dereferencing a null task pointer while walking the
stack.
* A fix to the memory size in the HiFive Unleashed device tree.
* A fix to disable stack protectors when randstruct is enabled, which
results in non-deterministic offsets during module builds.
* A pair of fixes to avoid relying on a constant physical memory base
for the non-XIP builds.
-----BEGIN PGP SIGNATURE-----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=yf+K
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- avoid dereferencing a null task pointer while walking the stack
- fix the memory size in the HiFive Unleashed device tree
- disable stack protectors when randstruct is enabled, which results in
non-deterministic offsets during module builds
- a pair of fixes to avoid relying on a constant physical memory base
for the non-XIP builds
* tag 'riscv-for-linus-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
Revert "riscv: Remove CONFIG_PHYS_RAM_BASE_FIXED"
riscv: Get rid of CONFIG_PHYS_RAM_BASE in kernel physical address conversion
riscv: Disable STACKPROTECTOR_PER_TASK if GCC_PLUGIN_RANDSTRUCT is enabled
riscv: dts: fix memory size for the SiFive HiFive Unmatched
riscv: stacktrace: Fix NULL pointer dereference
- Correct the Extended Regular Expressions in tools
- Adjust scripts/checkversion.pl for the current Kbuild
- Unset sub_make_done for 'make install' to make DKMS working again
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmEOl2QVHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsG8ikP/1LjJPbB3PjFtVU24TD78z4ztfHq
xCtwOWzcP5FMXcb5sQWGc0UjwlJq3+meIm8rcRqJfKSUSRxrtUyKm9llwK0sFezF
GfC84AGKNwJwCAAoxZ7bpqmlQw7HnIGsrk9mzkw/NWa19nUMm3D4Oaek3KMdumdV
BYPmm4AzTuyXah4a1ZZxmR/47WRty37jIBELAkpQyqhgFrxz420weewEMUiL53cv
ipaXSluD1v+9ezJi5VBtsedC5TTUYPsqPfmwGaI6QNX4rT/kNNxj1e478JnAtkPM
CKAbR/0pswWOvlYiDpdVTVmmyigYznCRsuwOwBp0DVYLlshVnCItKiv1rrhUHpED
1m5jExu5NFoFNhHYTPoOxAj34AlQ7PQAN+M14cklvv1DNrtunR5QbVPEj7PMEd0W
O5orQag4OqQQ2hqz/q57+FhX3QjijcGHwutjfxb/wfY84+q+e4QjaVITzpD92Yvq
6j/FhDBE9Z0ZaznF1zgxghM72995n8HW6ZkCGDg6etfUi2aSeeNxFle1OYAtRtmp
ZCefhAnPsUVjTvwzOZ/43ukUjW20o4uR/I/25MFVdQbFGDnCYpbC/RJDyJK2VxqY
yznpY6sI9LbpbzxwXUzB5DyAosaExOi1iUJ0NK2YZ47lp7RVAxpvWBEr1VT7m37W
WF7TETMdF5IV9lFn
=M+2q
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Correct the Extended Regular Expressions in tools
- Adjust scripts/checkversion.pl for the current Kbuild
- Unset sub_make_done for 'make install' to make DKMS work again
* tag 'kbuild-fixes-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: cancel sub_make_done for the install target to fix DKMS
scripts: checkversion: modernize linux/version.h search strings
mips: Fix non-POSIX regexp
x86/tools/relocs: Fix non-POSIX regexp
This reverts commit 9b79878ced.
The removal of this config exposes CONFIG_PHYS_RAM_BASE for all kernel
types: this value being implementation-specific, this breaks the
genericity of the RISC-V kernel so revert it.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The usage of CONFIG_PHYS_RAM_BASE for all kernel types was a mistake:
this value is implementation-specific and this breaks the genericity of
the RISC-V kernel.
Fix this by introducing a new variable phys_ram_base that holds this
value at runtime and use it in the kernel physical address conversion
macro. Since this value is used only for XIP kernels, evaluate it only if
CONFIG_XIP_KERNEL is set which in addition optimizes this macro for
standard kernels at compile-time.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Fixes: 44c9225729 ("RISC-V: enable XIP")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The kyber ioscheduler calls trace_block_rq_insert() *after* the request
is added to the queue but the documentation for trace_block_rq_insert()
says that the call should be made *before* the request is added to the
queue. Move the tracepoint for the kyber ioscheduler so that it is
consistent with the documentation.
Signed-off-by: Vincent Fu <vincent.fu@samsung.com>
Link: https://lore.kernel.org/r/20210804194913.10497-1-vincent.fu@samsung.com
Reviewed by: Adam Manzanares <a.manzanares@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmENbm0ACgkQ8vlZVpUN
gaNEEQf7B8GXPqJvRgqhJwCdqmZqz8DB7dfjqT0SB99f1EL3VoeHEvo+yEgMqD3L
cSYRFh4efEHgr51HSZoIPINqcU9hs86SvFmjd6jWIcnY/EJLd0g3e8aEWpJ3S5rR
3avSC4tiDbn34GgDeoR2DFG6RsGbRxDUEEzkrd8h7Hx6q39s3aXdi89lBmBe8rg/
lIVaeivZrZ7SfY/YFEziF0P7KurJNju6lGwqm0xAqu79J9QaabXMF1u5GPjUi2rw
TIaLMSP6O5VQbQwskcTIhJlKSAB4aUIB+fMV5Zi2cCXAKGdzK24xdM5VbzOeKAAX
1EwOE9GEyytpxD1P0zb8vVGsJW3wjQ==
=hQAS
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"A regression fix, bug fix, and a comment cleanup for ext4"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix potential htree corruption when growing large_dir directories
ext4: remove conflicting comment from __ext4_forget
ext4: fix potential uninitialized access to retval in kmmpd
As callbacks to a tracepoint are paired with the data that is passed in when
the callback is registered to the tracepoint, it must have that data passed
to the callback when the tracepoint is triggered, else bad things will
happen. To keep the two together, they are both assigned to a tracepoint
structure and added to an array. The tracepoint call site will dereference
the structure (via RCU) and call the callback in that structure along with
the data in that structure. This keeps the callback and data tightly
coupled.
Because of the overhead that retpolines have on tracepoint callbacks, if
there's only one callback attached to a tracepoint (a common case), then it
is called via a static call (code modified to do a direct call instead of an
indirect call). But to implement this, the data had to be decoupled from the
callback, as now the callback is implemented via a direct call from the
static call and not an indirect call from the dereferenced structure.
Note, the static call only calls a callback used when there's a single
callback attached to the tracepoint. If more than one callback is attached
to the same tracepoint, then the static call will call an iterator
function that goes back to dereferencing the structure keeping the callback
and its data tightly coupled again.
Issues can arise when going from 0 callbacks to one, as the static call is
assigned to the callback, and it must take care that the data passed to it
is loaded before the static call calls the callback. Going from 1 to 2
callbacks is not an issue, as long as the static call is updated to the
iterator before the tracepoint structure array is updated via RCU. Going
from 2 to more or back down to 2 is not an issue as the iterator can handle
all theses cases. But going from 2 to 1, care must be taken as the static
call is now calling a callback and the data that is loaded must be the data
for that callback.
Care was taken to ensure the callback and data would be in-sync, but after
a bug was reported, it became clear that not enough was done to make sure
that was the case. These changes address this.
The first change is to compare the old and new data instead of the old and
new callback, as it's the data that can corrupt the callback, even if the
callback is the same (something getting freed).
The next change is to convert these transitions into states, to make it
easier to know when a synchronization is needed, and to perform those
synchronizations. The problem with this patch is that it slows down
disabling all events from under a second, to making it take over 10 seconds
to do the same work. But that is addressed in the final patch.
The final patch uses the RCU state functions to keep track of the RCU state
between the transitions, and only needs to perform the synchronization if an
RCU synchronization hasn't been done already. This brings the performance of
disabling all events back to its original value. That's because no
synchronization is required between disabling tracepoints but is required
when enabling a tracepoint after its been disabled. If an RCU
synchronization happens after the tracepoint is disabled, and before it is
re-enabled, there's no need to do the synchronization again.
Both the second and third patch have subtle complexities that they are
separated into two patches. But because the second patch causes such a
regression in performance, the third patch adds a "Fixes" tag to the second
patch, such that the two must be backported together and not just the second
patch.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYQ15TBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnmmAP4hoA34CDr5hrd8mYLeKptW63f5Nd1w
fVZjprfa1wJhZAEAq39OeRCT4Fb2hIeZNBNUnLU90f+J6NH5QFDEhW+CkAI=
=JcZS
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.14-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Fix tracepoint race between static_call and callback data
As callbacks to a tracepoint are paired with the data that is passed
in when the callback is registered to the tracepoint, it must have
that data passed to the callback when the tracepoint is triggered,
else bad things will happen. To keep the two together, they are both
assigned to a tracepoint structure and added to an array. The
tracepoint call site will dereference the structure (via RCU) and call
the callback in that structure along with the data in that structure.
This keeps the callback and data tightly coupled.
Because of the overhead that retpolines have on tracepoint callbacks,
if there's only one callback attached to a tracepoint (a common case),
then it is called via a static call (code modified to do a direct call
instead of an indirect call). But to implement this, the data had to
be decoupled from the callback, as now the callback is implemented via
a direct call from the static call and not an indirect call from the
dereferenced structure.
Note, the static call only calls a callback used when there's a single
callback attached to the tracepoint. If more than one callback is
attached to the same tracepoint, then the static call will call an
iterator function that goes back to dereferencing the structure
keeping the callback and its data tightly coupled again.
Issues can arise when going from 0 callbacks to one, as the static
call is assigned to the callback, and it must take care that the data
passed to it is loaded before the static call calls the callback.
Going from 1 to 2 callbacks is not an issue, as long as the static
call is updated to the iterator before the tracepoint structure array
is updated via RCU. Going from 2 to more or back down to 2 is not an
issue as the iterator can handle all theses cases. But going from 2 to
1, care must be taken as the static call is now calling a callback and
the data that is loaded must be the data for that callback.
Care was taken to ensure the callback and data would be in-sync, but
after a bug was reported, it became clear that not enough was done to
make sure that was the case. These changes address this.
The first change is to compare the old and new data instead of the old
and new callback, as it's the data that can corrupt the callback, even
if the callback is the same (something getting freed).
The next change is to convert these transitions into states, to make
it easier to know when a synchronization is needed, and to perform
those synchronizations. The problem with this patch is that it slows
down disabling all events from under a second, to making it take over
10 seconds to do the same work. But that is addressed in the final
patch.
The final patch uses the RCU state functions to keep track of the RCU
state between the transitions, and only needs to perform the
synchronization if an RCU synchronization hasn't been done already.
This brings the performance of disabling all events back to its
original value. That's because no synchronization is required between
disabling tracepoints but is required when enabling a tracepoint after
its been disabled. If an RCU synchronization happens after the
tracepoint is disabled, and before it is re-enabled, there's no need
to do the synchronization again.
Both the second and third patch have subtle complexities that they are
separated into two patches. But because the second patch causes such a
regression in performance, the third patch adds a "Fixes" tag to the
second patch, such that the two must be backported together and not
just the second patch"
* tag 'trace-v5.14-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracepoint: Use rcu get state and cond sync for static call updates
tracepoint: Fix static call function vs data state mismatch
tracepoint: static call: Compare data on transition from 2->1 callees
