This changes generic-compat-pmu.c so that it only uses architected
events defined in Power ISA v3.0B, rather than event encodings which,
while common to all the IBM Power Systems implementations, are
nevertheless implementation-specific rather than architected. The
intention is that any CPU implementation designed to conform to Power
ISA v3.0B or later can use generic-compat-pmu.c.
In addition to the existing events for cycles and instructions, this
adds several other architected events, including alternative encodings
for some events. In order to make it possible to measure cycles and
instructions at the same time as each other, we set the CC5-6RUN bit
in MMCR0, which makes PMC5 and PMC6 count instructions and cycles
regardless of the run bit, so their events are now PM_CYC and
PM_INST_CMPL rather than PM_RUN_CYC and PM_RUN_INST_CMPL (the latter
are still available via other event codes).
Note that POWER9 has an erratum where one architected event
(PM_FLOP_CMPL, floating-point operations completed, code 0x100f4) does
not work correctly. Given that there is a specific PMU driver for P9
which will be used in preference to generic-compat-pmu.c, that is not
a real problem.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YJD7L9yeoxvxqeYi@thinks.paulus.ozlabs.org
Instead of making bare calls to get-sensor-state, use
rtas_get_sensor(), which correctly handles busy and extended delay
statuses.
Fixes: ab519a011c ("powerpc/pseries: Kernel DLPAR Infrastructure")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210504025329.1713878-1-nathanl@linux.ibm.com
There is a spelling mistake "byes" -> "bytes" in a comment of
function drc_pmem_query_stats(). Fix that typo.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210418074003.6651-1-kjain@linux.ibm.com
Commit a21d1becaa ("powerpc: Reintroduce is_kvm_guest() as a fast-path
check") added is_kvm_guest() and changed kvm_para_available() to use it.
is_kvm_guest() checks a static key, kvm_guest, and that static key is
set in check_kvm_guest().
The problem is check_kvm_guest() is only called on pseries, and even
then only in some configurations. That means is_kvm_guest() always
returns false on all non-pseries and some pseries depending on
configuration. That's a bug.
For PR KVM guests this is noticable because they no longer do live
patching of themselves, which can be detected by the omission of a
message in dmesg such as:
KVM: Live patching for a fast VM worked
To fix it make check_kvm_guest() an initcall, to ensure it's always
called at boot. It needs to be core so that it runs before
kvm_guest_init() which is postcore. To be an initcall it needs to return
int, where 0 means success, so update that.
We still call it manually in pSeries_smp_probe(), because that runs
before init calls are run.
Fixes: a21d1becaa ("powerpc: Reintroduce is_kvm_guest() as a fast-path check")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210623130514.2543232-1-mpe@ellerman.id.au
When we boot from open firmware (OF) using PPC_OF_BOOT_TRAMPOLINE, aka.
prom_init, we run parts of the kernel at an address other than the link
address. That happens because OF loads the kernel above zero (OF is at
zero) and we run prom_init before copying the kernel down to zero.
Currently that works even for non-relocatable kernels, because we do
various fixups to the prom_init code to make it run where it's loaded.
However those fixups are not sufficient if the kernel becomes large
enough. In that case prom_init()'s final call to __start() can end up
generating a plt branch:
bl c000000002000018 <00000078.plt_branch.__start>
That results in the kernel jumping to the linked address of __start,
0xc000000000000000, when really it needs to jump to the
0xc000000000000000 + the runtime address because the kernel is still
running at the load address.
We could do further shenanigans to handle that, see Jordan's patch for
example:
https://lore.kernel.org/linuxppc-dev/20210421021721.1539289-1-jniethe5@gmail.com
However it is much simpler to just require a kernel with prom_init() to
be built relocatable. The result works in all configurations without
further work, and requires less code.
This should have no effect on most people, as our defconfigs and
essentially all distro configs already have RELOCATABLE enabled.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210623130454.2542945-1-mpe@ellerman.id.au
On PowerVM, the hypervisor defines the maximum buffer length for
each NX request and the kernel exported this value via sysfs.
This patch reads this value if the sysfs entry is available and
is used to limit the request length.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ed908341b1eb7ca0183c028a4ed4a0cf48bfe0f6.camel@linux.ibm.com
blrl corrupts the link stack. Instead use bctrl when making function
calls from BPF programs.
Reported-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210609090024.1446800-1-naveen.n.rao@linux.vnet.ibm.com
It is sometimes desirable to run a command on all cpus in xmon. A
typical scenario is to obtain the backtrace from all cpus in xmon if
there is a soft lockup. Add rudimentary support for the same. The
command to be run on all cpus should be prefixed with 'c#'. As an
example, 'c#t' will run 't' command and produce a backtrace on all cpus
in xmon.
Since many xmon commands are not sensible for running in this manner, we
only allow a predefined list of commands -- 'r', 'S' and 't' for now.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210601074801.617363-1-naveen.n.rao@linux.vnet.ibm.com
Both these config options are generally enabled in distro kernels.
Enable the same in a few powerpc64 configs to get better coverage and
testing.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210524120227.3333208-1-naveen.n.rao@linux.vnet.ibm.com
Persistent memory devices like NVDIMMs can loose cached writes in case
something prevents flush on power-fail. Such situations are termed as
dirty shutdown and are exposed to applications as
last-shutdown-state (LSS) flag and a dirty-shutdown-counter(DSC) as
described at [1]. The latter being useful in conditions where multiple
applications want to detect a dirty shutdown event without racing with
one another.
PAPR-NVDIMMs have so far only exposed LSS style flags to indicate a
dirty-shutdown-state. This patch further adds support for DSC via the
"ibm,persistence-failed-count" device tree property of an NVDIMM. This
property is a monotonic increasing 64-bit counter thats an indication
of number of times an NVDIMM has encountered a dirty-shutdown event
causing persistence loss.
Since this value is not expected to change after system-boot hence
papr_scm reads & caches its value during NVDIMM probe and exposes it
as a PAPR sysfs attributed named 'dirty_shutdown' to match the name of
similarly named NFIT sysfs attribute. Also this value is available to
libnvdimm via PAPR_PDSM_HEALTH payload. 'struct nd_papr_pdsm_health'
has been extended to add a new member called 'dimm_dsc' presence of
which is indicated by the newly introduced PDSM_DIMM_DSC_VALID flag.
References:
[1] https://pmem.io/documents/Dirty_Shutdown_Handling-V1.0.pdf
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210624080621.252038-1-vaibhav@linux.ibm.com
In case performance stats for an nvdimm are not available, reading the
'perf_stats' sysfs file returns an -ENOENT error. A better approach is
to make the 'perf_stats' file entirely invisible to indicate that
performance stats for an nvdimm are unavailable.
So this patch updates 'papr_nd_attribute_group' to add a 'is_visible'
callback implemented as newly introduced 'papr_nd_attribute_visible()'
that returns an appropriate mode in case performance stats aren't
supported in a given nvdimm.
Also the initialization of 'papr_scm_priv.stat_buffer_len' is moved
from papr_scm_nvdimm_init() to papr_scm_probe() so that it value is
available when 'papr_nd_attribute_visible()' is called during nvdimm
initialization.
Even though 'perf_stats' attribute is available since v5.9, there are
no known user-space tools/scripts that are dependent on presence of its
sysfs file. Hence I dont expect any user-space breakage with this
patch.
Fixes: 2d02bf835e ("powerpc/papr_scm: Fetch nvdimm performance stats from PHYP")
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210513092349.285021-1-vaibhav@linux.ibm.com
Trying to use a kprobe on ppc32 results in the below splat:
BUG: Unable to handle kernel data access on read at 0x7c0802a6
Faulting instruction address: 0xc002e9f0
Oops: Kernel access of bad area, sig: 11 [#1]
BE PAGE_SIZE=4K PowerPC 44x Platform
Modules linked in:
CPU: 0 PID: 89 Comm: sh Not tainted 5.13.0-rc1-01824-g3a81c0495fdb #7
NIP: c002e9f0 LR: c0011858 CTR: 00008a47
REGS: c292fd50 TRAP: 0300 Not tainted (5.13.0-rc1-01824-g3a81c0495fdb)
MSR: 00009000 <EE,ME> CR: 24002002 XER: 20000000
DEAR: 7c0802a6 ESR: 00000000
<snip>
NIP [c002e9f0] emulate_step+0x28/0x324
LR [c0011858] optinsn_slot+0x128/0x10000
Call Trace:
opt_pre_handler+0x7c/0xb4 (unreliable)
optinsn_slot+0x128/0x10000
ret_from_syscall+0x0/0x28
The offending instruction is:
81 24 00 00 lwz r9,0(r4)
Here, we are trying to load the second argument to emulate_step():
struct ppc_inst, which is the instruction to be emulated. On ppc64,
structures are passed in registers when passed by value. However, per
the ppc32 ABI, structures are always passed to functions as pointers.
This isn't being adhered to when setting up the call to emulate_step()
in the optprobe trampoline. Fix the same.
Fixes: eacf4c0202 ("powerpc: Enable OPTPROBES on PPC32")
Cc: stable@vger.kernel.org
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5bdc8cbc9a95d0779e27c9ddbf42b40f51f883c0.1624425798.git.christophe.leroy@csgroup.eu
Some of my commits were sent with identities
Marek Behun <marek.behun@nic.cz>
Marek Behún <marek.behun@nic.cz>
while the correct one is
Marek Behún <kabel@kernel.org>
Put this into mailmap so that git shortlog prints all my commits under
one identity.
Link: https://lkml.kernel.org/r/20210616113624.19351-2-kabel@kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix my name to use diacritics, since MAINTAINERS supports it.
Fix my e-mail address in MAINTAINERS' marvell10g PHY driver description,
I accidentally put my other e-mail address here.
Link: https://lkml.kernel.org/r/20210616113624.19351-1-kabel@kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Carpenter reported the following
The patch 0f87d9d30f: "mm/page_alloc: add an array-based interface
to the bulk page allocator" from Apr 29, 2021, leads to the following
static checker warning:
mm/page_alloc.c:5338 __alloc_pages_bulk()
warn: potentially one past the end of array 'page_array[nr_populated]'
The problem can occur if an array is passed in that is fully populated.
That potentially ends up allocating a single page and storing it past
the end of the array. This patch returns 0 if the array is fully
populated.
Link: https://lkml.kernel.org/r/20210618125102.GU30378@techsingularity.net
Fixes: 0f87d9d30f ("mm/page_alloc: add an array-based interface to the bulk page allocator")
Signed-off-by: Mel Gorman <mgorman@techsinguliarity.net>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the event that somebody would call this with an already fully
populated page_array, the last loop iteration would do an access beyond
the end of page_array.
It's of course extremely unlikely that would ever be done, but this
triggers my internal static analyzer. Also, if it really is not
supposed to be invoked this way (i.e., with no NULL entries in
page_array), the nr_populated<nr_pages check could simply be removed
instead.
Link: https://lkml.kernel.org/r/20210507064504.1712559-1-linux@rasmusvillemoes.dk
Fixes: 0f87d9d30f ("mm/page_alloc: add an array-based interface to the bulk page allocator")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently me_huge_page() temporary unlocks page to perform some actions
then locks it again later. My testcase (which calls hard-offline on
some tail page in a hugetlb, then accesses the address of the hugetlb
range) showed that page allocation code detects this page lock on buddy
page and printed out "BUG: Bad page state" message.
check_new_page_bad() does not consider a page with __PG_HWPOISON as bad
page, so this flag works as kind of filter, but this filtering doesn't
work in this case because the "bad page" is not the actual hwpoisoned
page. So stop locking page again. Actions to be taken depend on the
page type of the error, so page unlocking should be done in ->action()
callbacks. So let's make it assumed and change all existing callbacks
that way.
Link: https://lkml.kernel.org/r/20210609072029.74645-1-nao.horiguchi@gmail.com
Fixes: commit 78bb920344 ("mm: hwpoison: dissolve in-use hugepage in unrecoverable memory error")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When memory_failure() is called with MF_ACTION_REQUIRED on the page that
has already been hwpoisoned, memory_failure() could fail to send SIGBUS
to the affected process, which results in infinite loop of MCEs.
Currently memory_failure() returns 0 if it's called for already
hwpoisoned page, then the caller, kill_me_maybe(), could return without
sending SIGBUS to current process. An action required MCE is raised
when the current process accesses to the broken memory, so no SIGBUS
means that the current process continues to run and access to the error
page again soon, so running into MCE loop.
This issue can arise for example in the following scenarios:
- Two or more threads access to the poisoned page concurrently. If
local MCE is enabled, MCE handler independently handles the MCE
events. So there's a race among MCE events, and the second or latter
threads fall into the situation in question.
- If there was a precedent memory error event and memory_failure() for
the event failed to unmap the error page for some reason, the
subsequent memory access to the error page triggers the MCE loop
situation.
To fix the issue, make memory_failure() return an error code when the
error page has already been hwpoisoned. This allows memory error
handler to control how it sends signals to userspace. And make sure
that any process touching a hwpoisoned page should get a SIGBUS even in
"already hwpoisoned" path of memory_failure() as is done in page fault
path.
Link: https://lkml.kernel.org/r/20210521030156.2612074-3-nao.horiguchi@gmail.com
Signed-off-by: Aili Yao <yaoaili@kingsoft.com>
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jue Wang <juew@google.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm,hwpoison: fix sending SIGBUS for Action Required MCE", v5.
I wrote this patchset to materialize what I think is the current
allowable solution mentioned by the previous discussion [1]. I simply
borrowed Tony's mutex patch and Aili's return code patch, then I queued
another one to find error virtual address in the best effort manner. I
know that this is not a perfect solution, but should work for some
typical case.
[1]: https://lore.kernel.org/linux-mm/20210331192540.2141052f@alex-virtual-machine/
This patch (of 2):
There can be races when multiple CPUs consume poison from the same page.
The first into memory_failure() atomically sets the HWPoison page flag
and begins hunting for tasks that map this page. Eventually it
invalidates those mappings and may send a SIGBUS to the affected tasks.
But while all that work is going on, other CPUs see a "success" return
code from memory_failure() and so they believe the error has been
handled and continue executing.
Fix by wrapping most of the internal parts of memory_failure() in a
mutex.
[akpm@linux-foundation.org: make mf_mutex local to memory_failure()]
Link: https://lkml.kernel.org/r/20210521030156.2612074-1-nao.horiguchi@gmail.com
Link: https://lkml.kernel.org/r/20210521030156.2612074-2-nao.horiguchi@gmail.com
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Aili Yao <yaoaili@kingsoft.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jue Wang <juew@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If more than one futex is placed on a shmem huge page, it can happen
that waking the second wakes the first instead, and leaves the second
waiting: the key's shared.pgoff is wrong.
When 3.11 commit 13d60f4b6a ("futex: Take hugepages into account when
generating futex_key"), the only shared huge pages came from hugetlbfs,
and the code added to deal with its exceptional page->index was put into
hugetlb source. Then that was missed when 4.8 added shmem huge pages.
page_to_pgoff() is what others use for this nowadays: except that, as
currently written, it gives the right answer on hugetlbfs head, but
nonsense on hugetlbfs tails. Fix that by calling hugetlbfs-specific
hugetlb_basepage_index() on PageHuge tails as well as on head.
Yes, it's unconventional to declare hugetlb_basepage_index() there in
pagemap.h, rather than in hugetlb.h; but I do not expect anything but
page_to_pgoff() ever to need it.
[akpm@linux-foundation.org: give hugetlb_basepage_index() prototype the correct scope]
Link: https://lkml.kernel.org/r/b17d946b-d09-326e-b42a-52884c36df32@google.com
Fixes: 800d8c63b2 ("shmem: add huge pages support")
Reported-by: Neel Natu <neelnatu@google.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Zhang Yi <wetpzy@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The system might hang with the following backtrace:
schedule+0x80/0x100
schedule_timeout+0x48/0x138
wait_for_common+0xa4/0x134
wait_for_completion+0x1c/0x2c
kthread_flush_work+0x114/0x1cc
kthread_cancel_work_sync.llvm.16514401384283632983+0xe8/0x144
kthread_cancel_delayed_work_sync+0x18/0x2c
xxxx_pm_notify+0xb0/0xd8
blocking_notifier_call_chain_robust+0x80/0x194
pm_notifier_call_chain_robust+0x28/0x4c
suspend_prepare+0x40/0x260
enter_state+0x80/0x3f4
pm_suspend+0x60/0xdc
state_store+0x108/0x144
kobj_attr_store+0x38/0x88
sysfs_kf_write+0x64/0xc0
kernfs_fop_write_iter+0x108/0x1d0
vfs_write+0x2f4/0x368
ksys_write+0x7c/0xec
It is caused by the following race between kthread_mod_delayed_work()
and kthread_cancel_delayed_work_sync():
CPU0 CPU1
Context: Thread A Context: Thread B
kthread_mod_delayed_work()
spin_lock()
__kthread_cancel_work()
spin_unlock()
del_timer_sync()
kthread_cancel_delayed_work_sync()
spin_lock()
__kthread_cancel_work()
spin_unlock()
del_timer_sync()
spin_lock()
work->canceling++
spin_unlock
spin_lock()
queue_delayed_work()
// dwork is put into the worker->delayed_work_list
spin_unlock()
kthread_flush_work()
// flush_work is put at the tail of the dwork
wait_for_completion()
Context: IRQ
kthread_delayed_work_timer_fn()
spin_lock()
list_del_init(&work->node);
spin_unlock()
BANG: flush_work is not longer linked and will never get proceed.
The problem is that kthread_mod_delayed_work() checks work->canceling
flag before canceling the timer.
A simple solution is to (re)check work->canceling after
__kthread_cancel_work(). But then it is not clear what should be
returned when __kthread_cancel_work() removed the work from the queue
(list) and it can't queue it again with the new @delay.
The return value might be used for reference counting. The caller has
to know whether a new work has been queued or an existing one was
replaced.
The proper solution is that kthread_mod_delayed_work() will remove the
work from the queue (list) _only_ when work->canceling is not set. The
flag must be checked after the timer is stopped and the remaining
operations can be done under worker->lock.
Note that kthread_mod_delayed_work() could remove the timer and then
bail out. It is fine. The other canceling caller needs to cancel the
timer as well. The important thing is that the queue (list)
manipulation is done atomically under worker->lock.
Link: https://lkml.kernel.org/r/20210610133051.15337-3-pmladek@suse.com
Fixes: 9a6b06c8d9 ("kthread: allow to modify delayed kthread work")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reported-by: Martin Liu <liumartin@google.com>
Cc: <jenhaochen@google.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "kthread_worker: Fix race between kthread_mod_delayed_work()
and kthread_cancel_delayed_work_sync()".
This patchset fixes the race between kthread_mod_delayed_work() and
kthread_cancel_delayed_work_sync() including proper return value
handling.
This patch (of 2):
Simple code refactoring as a preparation step for fixing a race between
kthread_mod_delayed_work() and kthread_cancel_delayed_work_sync().
It does not modify the existing behavior.
Link: https://lkml.kernel.org/r/20210610133051.15337-2-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: <jenhaochen@google.com>
Cc: Martin Liu <liumartin@google.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In commit 121e6f3258 ("mm/vmalloc: hugepage vmalloc mappings"),
__vmalloc_node_range was changed such that __get_vm_area_node was no
longer called with the requested/real size of the vmalloc allocation,
but rather with a rounded-up size.
This means that __get_vm_area_node called kasan_unpoision_vmalloc() with
a rounded up size rather than the real size. This led to it allowing
access to too much memory and so missing vmalloc OOBs and failing the
kasan kunit tests.
Pass the real size and the desired shift into __get_vm_area_node. This
allows it to round up the size for the underlying allocators while still
unpoisioning the correct quantity of shadow memory.
Adjust the other call-sites to pass in PAGE_SHIFT for the shift value.
Link: https://lkml.kernel.org/r/20210617081330.98629-1-dja@axtens.net
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213335
Fixes: 121e6f3258 ("mm/vmalloc: hugepage vmalloc mappings")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Tested-by: David Gow <davidgow@google.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@gmail.com>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Create Secure Configuration Ultravisor Call does not support using
large pages for the virtual memory area. This is a hardware limitation.
This patch replaces the vzalloc call with an almost equivalent call to
the newly introduced vmalloc_no_huge function, which guarantees that
only small pages will be used for the backing.
The new call will not clear the allocated memory, but that has never
been an actual requirement.
Link: https://lkml.kernel.org/r/20210614132357.10202-3-imbrenda@linux.ibm.com
Fixes: 121e6f3258 ("mm/vmalloc: hugepage vmalloc mappings")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: add vmalloc_no_huge and use it", v4.
Add vmalloc_no_huge() and export it, so modules can allocate memory with
small pages.
Use the newly added vmalloc_no_huge() in KVM on s390 to get around a
hardware limitation.
This patch (of 2):
Commit 121e6f3258 ("mm/vmalloc: hugepage vmalloc mappings") added
support for hugepage vmalloc mappings, it also added the flag
VM_NO_HUGE_VMAP for __vmalloc_node_range to request the allocation to be
performed with 0-order non-huge pages.
This flag is not accessible when calling vmalloc, the only option is to
call directly __vmalloc_node_range, which is not exported.
This means that a module can't vmalloc memory with small pages.
Case in point: KVM on s390x needs to vmalloc a large area, and it needs
to be mapped with non-huge pages, because of a hardware limitation.
This patch adds the function vmalloc_no_huge, which works like vmalloc,
but it is guaranteed to always back the mapping using small pages. This
new function is exported, therefore it is usable by modules.
[akpm@linux-foundation.org: whitespace fixes, per Christoph]
Link: https://lkml.kernel.org/r/20210614132357.10202-1-imbrenda@linux.ibm.com
Link: https://lkml.kernel.org/r/20210614132357.10202-2-imbrenda@linux.ibm.com
Fixes: 121e6f3258 ("mm/vmalloc: hugepage vmalloc mappings")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
My local syzbot instance hit memory leak in nilfs2. The problem was in
missing kobject_put() in nilfs_sysfs_delete_device_group().
kobject_del() does not call kobject_cleanup() for passed kobject and it
leads to leaking duped kobject name if kobject_put() was not called.
Fail log:
BUG: memory leak
unreferenced object 0xffff8880596171e0 (size 8):
comm "syz-executor379", pid 8381, jiffies 4294980258 (age 21.100s)
hex dump (first 8 bytes):
6c 6f 6f 70 30 00 00 00 loop0...
backtrace:
kstrdup+0x36/0x70 mm/util.c:60
kstrdup_const+0x53/0x80 mm/util.c:83
kvasprintf_const+0x108/0x190 lib/kasprintf.c:48
kobject_set_name_vargs+0x56/0x150 lib/kobject.c:289
kobject_add_varg lib/kobject.c:384 [inline]
kobject_init_and_add+0xc9/0x160 lib/kobject.c:473
nilfs_sysfs_create_device_group+0x150/0x800 fs/nilfs2/sysfs.c:999
init_nilfs+0xe26/0x12b0 fs/nilfs2/the_nilfs.c:637
Link: https://lkml.kernel.org/r/20210612140559.20022-1-paskripkin@gmail.com
Fixes: da7141fb78 ("nilfs2: add /sys/fs/nilfs2/<device> group")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Michael L. Semon <mlsemon35@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Aha! Shouldn't that quick scan over pte_none()s make sure that it holds
ptlock in the PVMW_SYNC case? That too might have been responsible for
BUGs or WARNs in split_huge_page_to_list() or its unmap_page(), though
I've never seen any.
Link: https://lkml.kernel.org/r/1bdf384c-8137-a149-2a1e-475a4791c3c@google.com
Link: https://lore.kernel.org/linux-mm/20210412180659.B9E3.409509F4@e16-tech.com/
Fixes: ace71a19ce ("mm: introduce page_vma_mapped_walk()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Tested-by: Wang Yugui <wangyugui@e16-tech.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Running certain tests with a DEBUG_VM kernel would crash within hours,
on the total_mapcount BUG() in split_huge_page_to_list(), while trying
to free up some memory by punching a hole in a shmem huge page: split's
try_to_unmap() was unable to find all the mappings of the page (which,
on a !DEBUG_VM kernel, would then keep the huge page pinned in memory).
Crash dumps showed two tail pages of a shmem huge page remained mapped
by pte: ptes in a non-huge-aligned vma of a gVisor process, at the end
of a long unmapped range; and no page table had yet been allocated for
the head of the huge page to be mapped into.
Although designed to handle these odd misaligned huge-page-mapped-by-pte
cases, page_vma_mapped_walk() falls short by returning false prematurely
when !pmd_present or !pud_present or !p4d_present or !pgd_present: there
are cases when a huge page may span the boundary, with ptes present in
the next.
Restructure page_vma_mapped_walk() as a loop to continue in these cases,
while keeping its layout much as before. Add a step_forward() helper to
advance pvmw->address across those boundaries: originally I tried to use
mm's standard p?d_addr_end() macros, but hit the same crash 512 times
less often: because of the way redundant levels are folded together, but
folded differently in different configurations, it was just too
difficult to use them correctly; and step_forward() is simpler anyway.
Link: https://lkml.kernel.org/r/fedb8632-1798-de42-f39e-873551d5bc81@google.com
Fixes: ace71a19ce ("mm: introduce page_vma_mapped_walk()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
page_vma_mapped_walk() cleanup: get THP's vma_address_end() at the
start, rather than later at next_pte.
It's a little unnecessary overhead on the first call, but makes for a
simpler loop in the following commit.
Link: https://lkml.kernel.org/r/4542b34d-862f-7cb4-bb22-e0df6ce830a2@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
page_vma_mapped_walk() cleanup: add a label this_pte, matching next_pte,
and use "goto this_pte", in place of the "while (1)" loop at the end.
Link: https://lkml.kernel.org/r/a52b234a-851-3616-2525-f42736e8934@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
page_vma_mapped_walk() cleanup: add a level of indentation to much of
the body, making no functional change in this commit, but reducing the
later diff when this is all converted to a loop.
[hughd@google.com: : page_vma_mapped_walk(): add a level of indentation fix]
Link: https://lkml.kernel.org/r/7f817555-3ce1-c785-e438-87d8efdcaf26@google.com
Link: https://lkml.kernel.org/r/efde211-f3e2-fe54-977-ef481419e7f3@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
page_vma_mapped_walk() cleanup: adjust the test for crossing page table
boundary - I believe pvmw->address is always page-aligned, but nothing
else here assumed that; and remember to reset pvmw->pte to NULL after
unmapping the page table, though I never saw any bug from that.
Link: https://lkml.kernel.org/r/799b3f9c-2a9e-dfef-5d89-26e9f76fd97@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
page_vma_mapped_walk() cleanup: rearrange the !pmd_present() block to
follow the same "return not_found, return not_found, return true"
pattern as the block above it (note: returning not_found there is never
premature, since existence or prior existence of huge pmd guarantees
good alignment).
Link: https://lkml.kernel.org/r/378c8650-1488-2edf-9647-32a53cf2e21@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
page_vma_mapped_walk() cleanup: re-evaluate pmde after taking lock, then
use it in subsequent tests, instead of repeatedly dereferencing pointer.
Link: https://lkml.kernel.org/r/53fbc9d-891e-46b2-cb4b-468c3b19238e@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
page_vma_mapped_walk() cleanup: get the hugetlbfs PageHuge case out of
the way at the start, so no need to worry about it later.
Link: https://lkml.kernel.org/r/e31a483c-6d73-a6bb-26c5-43c3b880a2@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: page_vma_mapped_walk() cleanup and THP fixes".
I've marked all of these for stable: many are merely cleanups, but I
think they are much better before the main fix than after.
This patch (of 11):
page_vma_mapped_walk() cleanup: sometimes the local copy of pvwm->page
was used, sometimes pvmw->page itself: use the local copy "page"
throughout.
Link: https://lkml.kernel.org/r/589b358c-febc-c88e-d4c2-7834b37fa7bf@google.com
Link: https://lkml.kernel.org/r/88e67645-f467-c279-bf5e-af4b5c6b13eb@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Wang Yugui <wangyugui@e16-tech.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The codes "dev_err(&pdev->dev, "no IRQ resource found\n");" is
redundant because platform_get_irq() already prints an error.
Signed-off-by: gushengxian <gushengxian@yulong.com>
Link: https://lore.kernel.org/r/20210622115507.359017-1-13145886936@163.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lockdep complains about lock inversion between ioc->lock and bfqd->lock:
bfqd -> ioc:
put_io_context+0x33/0x90 -> ioc->lock grabbed
blk_mq_free_request+0x51/0x140
blk_put_request+0xe/0x10
blk_attempt_req_merge+0x1d/0x30
elv_attempt_insert_merge+0x56/0xa0
blk_mq_sched_try_insert_merge+0x4b/0x60
bfq_insert_requests+0x9e/0x18c0 -> bfqd->lock grabbed
blk_mq_sched_insert_requests+0xd6/0x2b0
blk_mq_flush_plug_list+0x154/0x280
blk_finish_plug+0x40/0x60
ext4_writepages+0x696/0x1320
do_writepages+0x1c/0x80
__filemap_fdatawrite_range+0xd7/0x120
sync_file_range+0xac/0xf0
ioc->bfqd:
bfq_exit_icq+0xa3/0xe0 -> bfqd->lock grabbed
put_io_context_active+0x78/0xb0 -> ioc->lock grabbed
exit_io_context+0x48/0x50
do_exit+0x7e9/0xdd0
do_group_exit+0x54/0xc0
To avoid this inversion we change blk_mq_sched_try_insert_merge() to not
free the merged request but rather leave that upto the caller similarly
to blk_mq_sched_try_merge(). And in bfq_insert_requests() we make sure
to free all the merged requests after dropping bfqd->lock.
Fixes: aee69d78de ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210623093634.27879-3-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, bfq does very little in bfq_requests_merged() and handles all
the request cleanup in bfq_finish_requeue_request() called from
blk_mq_free_request(). That is currently safe only because
blk_mq_free_request() is called shortly after bfq_requests_merged()
while bfqd->lock is still held. However to fix a lock inversion between
bfqd->lock and ioc->lock, we need to call blk_mq_free_request() after
dropping bfqd->lock. That would mean that already merged request could
be seen by other processes inside bfq queues and possibly dispatched to
the device which is wrong. So move cleanup of the request from
bfq_finish_requeue_request() to bfq_requests_merged().
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210623093634.27879-2-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The Broadcom UniMAC MDIO bus from mdio-bcm-unimac module comes too late.
So, GENET cannot find the ethernet PHY on UniMAC MDIO bus. This leads
GENET fail to attach the PHY as following log:
bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
...
could not attach to PHY
bcmgenet fd580000.ethernet eth0: failed to connect to PHY
uart-pl011 fe201000.serial: no DMA platform data
libphy: bcmgenet MII bus: probed
...
unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
It is not just coming too late, there is also no way for the module
loader to figure out the dependency between GENET and its MDIO bus
driver unless we provide this MODULE_SOFTDEP hint.
This patch adds the soft dependency to load mdio-bcm-unimac module
before genet module to fix this issue.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=213485
Fixes: 9a4e796970 ("net: bcmgenet: utilize generic Broadcom UniMAC MDIO controller driver")
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
priv->cbs is an array of priv->info->num_cbs_shapers elements of type
struct sja1105_cbs_entry which only get allocated if CONFIG_NET_SCH_CBS
is enabled.
However, sja1105_reload_cbs() is called from sja1105_static_config_reload()
which in turn is called for any of the items in sja1105_reset_reasons,
therefore during the normal runtime of the driver and not just from a
code path which can be triggered by the tc-cbs offload.
The sja1105_reload_cbs() function does not contain a check whether the
priv->cbs array is NULL or not, it just assumes it isn't and proceeds to
iterate through the credit-based shaper elements. This leads to a NULL
pointer dereference.
The solution is to return success if the priv->cbs array has not been
allocated, since sja1105_reload_cbs() has nothing to do.
Fixes: 4d7525085a ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 275e88b06a ("PCI: tegra: Fix host link initialization") broke
host initialization during resume as it misses out calling the API
dw_pcie_setup_rc() which is required for host and MSI initialization.
Link: https://lore.kernel.org/r/20210504172157.29712-1-vidyas@nvidia.com
Fixes: 275e88b06a ("PCI: tegra: Fix host link initialization")
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add missing MODULE_DEVICE_TABLE definition so we generate correct modalias
for automatic loading of this driver when it is built as a module.
Link: https://lore.kernel.org/r/1620792422-16535-1-git-send-email-zou_wei@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Simply get a pointer to the data in the register payload instead of
copying it to a temporary buffer.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2021-06-24
An update from ieee802154 for your *net* tree.
This time we only have fixes for ieee802154 hwsim driver.
Sparked from some syzcaller reports We got a potential
crash fix from Eric Dumazet and two memory leak fixes from
Dongliang Mu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
https://patchwork.kernel.org/project/netdevbpf/list/?series=506637&state=*
- Remove unused variable
- Use correct integer type for string formatting.
- Remove `inline` in C files
Fixes: 9c1a59a2f4 ("gve: DQO: Add ring allocation and initialization")
Fixes: a57e5de476 ("gve: DQO: Add TX path")
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
