Add support for the SKIP directive to kunit_tool's TAP parser.
Skipped tests now show up as such in the printed summary. The number of
skipped tests is counted, and if all tests in a suite are skipped, the
suite is also marked as skipped. Otherwise, skipped tests do affect the
suite result.
Example output:
[00:22:34] ======== [SKIPPED] example_skip ========
[00:22:34] [SKIPPED] example_skip_test # SKIP this test should be skipped
[00:22:34] [SKIPPED] example_mark_skipped_test # SKIP this test should be skipped
[00:22:34] ============================================================
[00:22:34] Testing complete. 2 tests run. 0 failed. 0 crashed. 2 skipped.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The kunit_mark_skipped() macro marks the current test as "skipped", with
the provided reason. The kunit_skip() macro will mark the test as
skipped, and abort the test.
The TAP specification supports this "SKIP directive" as a comment after
the "ok" / "not ok" for a test. See the "Directives" section of the TAP
spec for details:
https://testanything.org/tap-specification.html#directives
The 'success' field for KUnit tests is replaced with a kunit_status
enum, which can be SUCCESS, FAILURE, or SKIPPED, combined with a
'status_comment' containing information on why a test was skipped.
A new 'kunit_status' test suite is added to test this.
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Marco Elver <elver@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Partially revert "thunderbolt: test: Remove some casts which are no
longer required". It turns out that typeof() doesn't support bitfields,
so these still need to be cast to the appropriate enum.
The only mention of typeof() and bitfields I can find is in the proposal
to standardise them:
http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2619.htm
This was caught by the kernel test robot:
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org/thread/FDKBHAV7QNLNFU5NBI2RKV56DWDSOLGM/
Fixes: 8f0877c26e ("thunderbolt: test: Remove some casts which are no longer required")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Note: this does not change the parser behavior at all (except for making
one error message more useful). This is just an internal refactor.
The TAP output parser currently operates over a List[str].
This works, but we only ever need to be able to "peek" at the current
line and the ability to "pop" it off.
Also, using a List means we need to wait for all the output before we
can start parsing. While this is not an issue for most tests which are
really lightweight, we do have some longer (~5 minutes) tests.
This patch introduces an LineStream wrapper class that
* Exposes a peek()/pop() interface instead of manipulating an array
* this allows us to more easily add debugging code [1]
* Can consume an input from a generator
* we can now parse results as tests are running (the parser code
currently doesn't print until the end, so no impact yet).
* Tracks the current line number to print better error messages
* Would allow us to add additional features more easily, e.g. storing
N previous lines so we can print out invalid lines in context, etc.
[1] The parsing logic is currently quite fragile.
E.g. it'll often say the kernel "CRASHED" if there's something slightly
wrong with the output format. When debugging a test that had some memory
corruption issues, it resulted in very misleading errors from the parser.
Now we could easily add this to trace all the lines consumed and why
+import inspect
...
def pop(self) -> str:
n = self._next
+ print(f'popping {n[0]}: {n[1].ljust(40, " ")}| caller={inspect.stack()[1].function}')
Example output:
popping 77: TAP version 14 | caller=parse_tap_header
popping 78: 1..1 | caller=parse_test_plan
popping 79: # Subtest: kunit_executor_test | caller=parse_subtest_header
popping 80: 1..2 | caller=parse_subtest_plan
popping 81: ok 1 - parse_filter_test | caller=parse_ok_not_ok_test_case
popping 82: ok 2 - filter_subsuite_test | caller=parse_ok_not_ok_test_case
popping 83: ok 1 - kunit_executor_test | caller=parse_ok_not_ok_test_suite
If we introduce an invalid line, we can see the parser go down the wrong path:
popping 77: TAP version 14 | caller=parse_tap_header
popping 78: 1..1 | caller=parse_test_plan
popping 79: # Subtest: kunit_executor_test | caller=parse_subtest_header
popping 80: 1..2 | caller=parse_subtest_plan
popping 81: 1..2 # this is invalid! | caller=parse_ok_not_ok_test_case
popping 82: ok 1 - parse_filter_test | caller=parse_ok_not_ok_test_case
popping 83: ok 2 - filter_subsuite_test | caller=parse_ok_not_ok_test_case
popping 84: ok 1 - kunit_executor_test | caller=parse_ok_not_ok_test_case
[ERROR] ran out of lines before end token
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Functionally, this just means that the test output will be slightly
changed and it'll now depend on CONFIG_KUNIT=y/m.
It'll still run at boot time and can still be built as a loadable
module.
There was a pre-existing patch to convert this test that I found later,
here [1]. Compared to [1], this patch doesn't rename files and uses
KUnit features more heavily (i.e. does more than converting pr_err()
calls to KUNIT_FAIL()).
What this conversion gives us:
* a shorter test thanks to KUnit's macros
* a way to run this a bit more easily via kunit.py (and
CONFIG_KUNIT_ALL_TESTS=y) [2]
* a structured way of reporting pass/fail
* uses kunit-managed allocations to avoid the risk of memory leaks
* more descriptive error messages:
* i.e. it prints out which fields are invalid, what the expected
values are, etc.
What this conversion does not do:
* change the name of the file (and thus the name of the module)
* change the name of the config option
Leaving these as-is for now to minimize the impact to people wanting to
run this test. IMO, that concern trumps following KUnit's style guide
for both names, at least for now.
[1] https://lore.kernel.org/linux-kselftest/20201015014616.309000-1-vitor@massaru.org/
[2] Can be run via
$ ./tools/testing/kunit/kunit.py run --kunitconfig /dev/stdin <<EOF
CONFIG_KUNIT=y
CONFIG_TEST_LIST_SORT=y
EOF
[16:55:56] Configuring KUnit Kernel ...
[16:55:56] Building KUnit Kernel ...
[16:56:29] Starting KUnit Kernel ...
[16:56:32] ============================================================
[16:56:32] ======== [PASSED] list_sort ========
[16:56:32] [PASSED] list_sort_test
[16:56:32] ============================================================
[16:56:32] Testing complete. 1 tests run. 0 failed. 0 crashed.
[16:56:32] Elapsed time: 35.668s total, 0.001s configuring, 32.725s building, 0.000s running
Note: the build time is as after a `make mrproper`.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Tested-by: David Gow <davidgow@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add in:
* kunit_kmalloc_array() and wire up kunit_kmalloc() to be a special
case of it.
* kunit_kcalloc() for symmetry with kunit_kzalloc()
This should using KUnit more natural by making it more similar to the
existing *alloc() APIs.
And while we shouldn't necessarily be writing unit tests where overflow
should be a concern, it can't hurt to be safe.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix a NULL pointer dereference introduced by a recent commit and
occurring when device_remove_software_node() is used with a device
that has never been registered (Heikki Krogerus).
-----BEGIN PGP SIGNATURE-----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=vBvH
-----END PGP SIGNATURE-----
Merge tag 'devprop-5.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework fix from Rafael Wysocki:
"Fix a NULL pointer dereference introduced by a recent commit and
occurring when device_remove_software_node() is used with a device
that has never been registered (Heikki Krogerus)"
* tag 'devprop-5.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
software node: Handle software node injection to an existing device properly
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYNXrhgAKCRCAXGG7T9hj
vuJDAP9WFyhonqK7ZPFy/nKqUXFdkAhXcVzshLaMZi2YR81T0wD9FNcA5efTAHLM
LPD0ZvubyAK43x1NKfUSpawPtk0WFAo=
=fomh
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.13b-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A fix for a regression introduced in 5.12: when migrating an irq
related to a Xen user event to another cpu, a race might result
in a WARN() triggering"
* tag 'for-linus-5.13b-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: reset active flag for lateeoi events later
This is a very small fix that was provided by Nick Piggin and tested
by myself.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmDU+IYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPNRggAj286k4/wI4bCFw4cB8MkuJc0hgYm
H22SuYjUsBwaxUPCYijRxshlq1nP21I05bJKHY1OpZPkEVyOd8MufC6Jc7YOENni
f0nmZRmRpgmKuIEnwLoLra17MpZn3qFOkWwfmmNLgtLX2CRaHbhq3gZpX2V3mP7J
qsepe0s65cCEbA0yC0+oMuS9JHAv7RjfDKM+3dOgE1pH83lv9UqF7W0WJfc0d7z0
KDPCLgU4Qa2rst/yPKwt/IFuzF8PBIwwYkYOZ/UrxKyZcUZGIHHyy0yWSywXIzcU
8zXl8AlUokadoqaGAP4qIaspDZWCIVA+S4X4y2Ly0CtExtfsh+27ww8eiQ==
=bjxg
-----END PGP SIGNATURE-----
Merge tag 'for-linus-urgent' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"A selftests fix for ARM, and the fix for page reference count
underflow. This is a very small fix that was provided by Nick Piggin
and tested by myself"
* tag 'for-linus-urgent' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: do not allow mapping valid but non-reference-counted pages
KVM: selftests: Fix mapping length truncation in m{,un}map()
Detailed description for this pull request:
1. Update devfreq core
- Use DEVICE_ATTR_RW macro for devfreq userspace governor
- Add missing error code in devfreq_add_device()
- Fix get_target_freq when not using required-opp
The 86ad9a24f2 ("PM / devfreq: Add required OPPs support to passive governor")
supported the required-opp property for using devfreq passive governor.
But, 86ad9a24f2 has caused the problem on use-case when required-opp
is not used. So that fix the passive governor for supporting the case of when
required-opp is not used.
2. Update devfreq driver
- Remove unneeded get_dev_status and polling_ms from imx-bus.c because
imx-bus.c doesn't support simple_ondemand.
- Remove unneeded DEVFREQ_GOV_SIMPLE_ONDEMAND dependecy from imx8m-ddrc.c
because it doesn't support simple_ondemand governor.
- Use tegra30-devfreq.c as thermal cooling device
- Convert dt-binding doc style to yaml and add cooling-cells property
information to dt-binding doc for tegra30-devfreq.c
-----BEGIN PGP SIGNATURE-----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=gc4V
-----END PGP SIGNATURE-----
Merge tag 'devfreq-next-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux
Pull devfreq material for v5.14 from Chanwoo Choi:
1. Update devfreq core
- Use DEVICE_ATTR_RW macro for devfreq userspace governor.
- Add missing error code in devfreq_add_device().
- Fix get_target_freq() when not using required-opp.
2. Update devfreq drivers
- Remove unneeded get_dev_status() and polling_ms from imx-bus.c,
because imx-bus.c doesn't support simple_ondemand.
- Remove unneeded DEVFREQ_GOV_SIMPLE_ONDEMAND dependecy from
imx8m-ddrc.c, because it doesn't support the simple_ondemand
governor.
- Use tegra30-devfreq.c as thermal cooling device.
- Convert dt-binding doc style to yaml and add cooling-cells
property information to dt-binding doc for tegra30-devfreq.c.
* tag 'devfreq-next-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: passive: Fix get_target_freq when not using required-opp
dt-bindings: devfreq: tegra30-actmon: Add cooling-cells
dt-bindings: devfreq: tegra30-actmon: Convert to schema
PM / devfreq: userspace: Use DEVICE_ATTR_RW macro
PM / devfreq: imx8m-ddrc: Remove DEVFREQ_GOV_SIMPLE_ONDEMAND dependency
PM / devfreq: tegra30: Support thermal cooling
PM / devfreq: imx-bus: Remove imx_bus_get_dev_status
PM / devfreq: Add missing error code in devfreq_add_device()
Coverity reports a signed 32-bit overflow on "1 << pprm->pble_shift" when
used expression to compute bits_needed that expects 64bit, unsigned.
Fix this by using the 1ULL in the left shift operator and convert mem_size
to u64.
Link: https://lore.kernel.org/r/20210625162329.1654-3-tatyana.e.nikolova@intel.com
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1505157 ("Integer handling issues")
Fixes: 915cc7ac0f ("RDMA/irdma: Add miscellaneous utility definitions")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The contents of user-space req object is used in array indexing in
irdma_handle_q_mem without checking for valid values.
Guard against bad input on each of these req object pages by limiting them
to number of pages that make up the region.
Link: https://lore.kernel.org/r/20210625162329.1654-2-tatyana.e.nikolova@intel.com
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1505160 ("TAINTED_SCALAR")
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- prevent unprivileged userspace from reinitializing supervisor states
- Prepare init_fpstate, which is the buffer used when initializing
FPU state, properly in case the skip-writing-state-components XSAVE*
variants are used.
-----BEGIN PGP SIGNATURE-----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=uqQE
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"Two more urgent FPU fixes:
- prevent unprivileged userspace from reinitializing supervisor
states
- prepare init_fpstate, which is the buffer used when initializing
FPU state, properly in case the skip-writing-state-components
XSAVE* variants are used"
* tag 'x86_urgent_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Make init_fpstate correct with optimized XSAVE
x86/fpu: Preserve supervisor states in sanitize_restored_user_xstate()
and one in the filesystem for proper propagation of MDS request errors.
Also included a locking fix for async creates, marked for stable.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmDV440THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi3CXB/0aA0Ka+weQtIxxX3zl1thsE1APxoKe
va77EfTJZbN12UHKAJ6sJUpXCLFc5hVJETw7w3qyz22VvJIPUQWd+h4w4eTXJ4QK
Fab6+HT0/p0NxZ29rxa1bkHnrRAD30cpNd6WXcAeMJ3ZKvZfPtPnIWXSmCbJYGLV
xhwx8y6kzjE60B60bjcQzuSpsMQkq0OpdXYdyxq3RysCjTCyDfpGuFnDHSv3aklm
d6tyv2nUDM/oF/CEFZrTeaLrIZsYxxkpJHKkm7Xy70bUv8IMW97CKJSFjKYucyYd
iV7VbtIKPq3sbGrmkaWm4nET5Z0C+m+JD2AhR17ylbdQy91hKaGrbnpw
=RTBT
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.13-rc8' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"Two regression fixes from the merge window: one in the auth code
affecting old clusters and one in the filesystem for proper
propagation of MDS request errors.
Also included a locking fix for async creates, marked for stable"
* tag 'ceph-for-5.13-rc8' of https://github.com/ceph/ceph-client:
libceph: set global_id as soon as we get an auth ticket
libceph: don't pass result into ac->ops->handle_reply()
ceph: fix error handling in ceph_atomic_open and ceph_lookup
ceph: must hold snap_rwsem when filling inode for async create
-----BEGIN PGP SIGNATURE-----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=2c6l
-----END PGP SIGNATURE-----
Merge tag 'netfs-fixes-20210621' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull netfs fixes from David Howells:
"This contains patches to fix netfs_write_begin() and afs_write_end()
in the following ways:
(1) In netfs_write_begin(), extract the decision about whether to skip
a page out to its own helper and have that clear around the region
to be written, but not clear that region. This requires the
filesystem to patch it up afterwards if the hole doesn't get
completely filled.
(2) Use offset_in_thp() in (1) rather than manually calculating the
offset into the page.
(3) Due to (1), afs_write_end() now needs to handle short data write
into the page by generic_perform_write(). I've adopted an
analogous approach to ceph of just returning 0 in this case and
letting the caller go round again.
It also adds a note that (in the future) the len parameter may extend
beyond the page allocated. This is because the page allocation is
deferred to write_begin() and that gets to decide what size of THP to
allocate."
Jeff Layton points out:
"The netfs fix in particular fixes a data corruption bug in cephfs"
* tag 'netfs-fixes-20210621' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
netfs: fix test for whether we can skip read when writing beyond EOF
afs: Fix afs_write_end() to handle short writes
- fix wake-up interrupt support on gpio-mxc
- zero the padding bytes in a structure passed to user-space in the GPIO
character device
- select HAS_IOPORT_MAP in two drivers that need it to fix a Kbuild issue
-----BEGIN PGP SIGNATURE-----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=udPz
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix wake-up interrupt support on gpio-mxc
- zero the padding bytes in a structure passed to user-space in the
GPIO character device
- require HAS_IOPORT_MAP in two drivers that need it to fix a Kbuild
issue
* tag 'gpio-fixes-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: AMD8111 and TQMX86 require HAS_IOPORT_MAP
gpiolib: cdev: zero padding during conversion to gpioline_info_changed
gpio: mxc: Fix disabled interrupt wake-up support
The HP EliteBook 830 G8 Notebook PC using ALC285 codec which using 0x04 to
control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210625133414.26760-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Two small changes have been cherry-picked as a last material for
5.13: a coverage after UMN revert action and a stale MAINTAINERS
entry fix.
-----BEGIN PGP SIGNATURE-----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=/VH1
-----END PGP SIGNATURE-----
Merge tag 'sound-5.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Two small changes have been cherry-picked as a last material for 5.13:
a coverage after UMN revert action and a stale MAINTAINERS entry fix"
* tag 'sound-5.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
MAINTAINERS: remove Timur Tabi from Freescale SOC sound drivers
ASoC: rt5645: Avoid upgrading static warnings to errors
Commit 6e6fcbc27e ("blk-mq: support batching dispatch in case of io")
starts to support io batching submission by using hctx->dispatch_busy.
However, blk_mq_update_dispatch_busy() isn't changed to update hctx->dispatch_busy
in that commit, so fix the issue by updating hctx->dispatch_busy in case
of real scheduler.
Reported-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Fixes: 6e6fcbc27e ("blk-mq: support batching dispatch in case of io")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210625020248.1630497-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch is modeled after one by Scott Peterson for i40e.
Add tracepoints to the driver, via a new file ice_trace.h and some new
trace calls added in interesting places in the driver. Add some tracing
for DIMLIB to help debug interrupt moderation problems.
Performance should not be affected, and this can be very useful
for debugging and adding new trace events to paths in the future.
Note eBPF programs can attach to these events, as well as perf
can count them since we're attaching to the events subsystem
in the kernel.
Co-developed-by: Ben Shelton <benjamin.h.shelton@intel.com>
Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
- Add MTE support in guests, complete with tag save/restore interface
- Reduce the impact of CMOs by moving them in the page-table code
- Allow device block mappings at stage-2
- Reduce the footprint of the vmemmap in protected mode
- Support the vGIC on dumb systems such as the Apple M1
- Add selftest infrastructure to support multiple configuration
and apply that to PMU/non-PMU setups
- Add selftests for the debug architecture
- The usual crop of PMU fixes
-----BEGIN PGP SIGNATURE-----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=fWBV
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for v5.14.
- Add MTE support in guests, complete with tag save/restore interface
- Reduce the impact of CMOs by moving them in the page-table code
- Allow device block mappings at stage-2
- Reduce the footprint of the vmemmap in protected mode
- Support the vGIC on dumb systems such as the Apple M1
- Add selftest infrastructure to support multiple configuration
and apply that to PMU/non-PMU setups
- Add selftests for the debug architecture
- The usual crop of PMU fixes
Expose the PEC calculation i2c_smbus_pec() for generic use.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Acked-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This error path needs to unlock before returning.
Fixes: ec0fa2445c ("RDMA/rxe: Fix over copying in get_srq_wqe")
Link: https://lore.kernel.org/r/YNXUCmnPsSkPyhkm@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Majd Dibbiny <majd@nvidia.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix a memory leak when "mda_resolve_route() is called more than once on
the same "rdma_cm_id".
This is possible if cma_query_handler() triggers the
RDMA_CM_EVENT_ROUTE_ERROR flow which puts the state machine back and
allows rdma_resolve_route() to be called again.
Link: https://lore.kernel.org/r/f6662b7b-bdb7-2706-1e12-47c61d3474b6@oracle.com
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- new HW facilities for guests
- make inline assembly more robust with KASAN and co
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=HiDo
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Features for 5.14
- new HW facilities for guests
- make inline assembly more robust with KASAN and co
In raise_backtrace_ipi() we iterate through the cpumask of CPUs, sending
each an IPI asking them to do a backtrace, but we don't wait for the
backtrace to happen.
We then iterate through the CPU mask again, and if any CPU hasn't done
the backtrace and cleared itself from the mask, we print a trace on its
behalf, noting that the trace may be "stale".
This works well enough when a CPU is not responding, because in that
case it doesn't receive the IPI and the sending CPU is left to print the
trace. But when all CPUs are responding we are left with a race between
the sending and receiving CPUs, if the sending CPU wins the race then it
will erroneously print a trace.
This leads to spurious "stale" traces from the sending CPU, which can
then be interleaved messily with the receiving CPU, note the CPU
numbers, eg:
[ 1658.929157][ C7] rcu: Stack dump where RCU GP kthread last ran:
[ 1658.929223][ C7] Sending NMI from CPU 7 to CPUs 1:
[ 1658.929303][ C1] NMI backtrace for cpu 1
[ 1658.929303][ C7] CPU 1 didn't respond to backtrace IPI, inspecting paca.
[ 1658.929362][ C1] CPU: 1 PID: 325 Comm: kworker/1:1H Tainted: G W E 5.13.0-rc2+ #46
[ 1658.929405][ C7] irq_soft_mask: 0x01 in_mce: 0 in_nmi: 0 current: 325 (kworker/1:1H)
[ 1658.929465][ C1] Workqueue: events_highpri test_work_fn [test_lockup]
[ 1658.929549][ C7] Back trace of paca->saved_r1 (0xc0000000057fb400) (possibly stale):
[ 1658.929592][ C1] NIP: c00000000002cf50 LR: c008000000820178 CTR: c00000000002cfa0
To fix it, change the logic so that the sending CPU waits 5s for the
receiving CPU to print its trace. If the receiving CPU prints its trace
successfully then the sending CPU just continues, avoiding any spurious
"stale" trace.
This has the added benefit of allowing all CPUs to print their traces in
order and avoids any interleaving of their output.
Fixes: 5cc05910f2 ("powerpc/64s: Wire up arch_trigger_cpumask_backtrace()")
Cc: stable@vger.kernel.org # v4.18+
Reported-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210625140408.3351173-1-mpe@ellerman.id.au
This doc helps Linux users navigate through I2C sysfs and learn
the system I2C topology.
Signed-off-by: Alex Qiu <xqiu@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
An approximation for the PacketLifeTime is half the local ACK timeout.
The encoding for both timers are logarithmic.
If the local ACK timeout is set, but zero, it means the timer is
disabled. In this case, we choose the CMA_IBOE_PACKET_LIFETIME value,
since 50% of infinite makes no sense.
Before this commit, the PacketLifeTime became 255 if local ACK
timeout was zero (not running).
Fixed by explicitly testing for timeout being zero.
Fixes: e1ee1e62be ("RDMA/cma: Use ACK timeout for RoCE packetLifeTime")
Link: https://lore.kernel.org/r/1624371207-26710-1-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Last minute fix for MTE, making sure the pages are
flagged as MTE before they are released.
* kvm-arm64/mmu/mte:
KVM: arm64: Set the MTE tag bit before releasing the page
Signed-off-by: Marc Zyngier <maz@kernel.org>
With the VIOT support in place, x86 platforms can now use the
virtio-iommu.
Because the other x86 IOMMU drivers aren't yet ready to use the
acpi_dma_setup() path, x86 doesn't implement arch_setup_dma_ops() at the
moment. Similarly to Vt-d and AMD IOMMU, clear the DMA ops and call
iommu_setup_dma_ops() from probe_finalize().
Acked-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210618152059.1194210-6-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Passing a 64-bit address width to iommu_setup_dma_ops() is valid on
virtual platforms, but isn't currently possible. The overflow check in
iommu_dma_init_domain() prevents this even when @dma_base isn't 0. Pass
a limit address instead of a size, so callers don't have to fake a size
to work around the check.
The base and limit parameters are being phased out, because:
* they are redundant for x86 callers. dma-iommu already reserves the
first page, and the upper limit is already in domain->geometry.
* they can now be obtained from dev->dma_range_map on Arm.
But removing them on Arm isn't completely straightforward so is left for
future work. As an intermediate step, simplify the x86 callers by
passing dummy limits.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20210618152059.1194210-5-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The ACPI Virtual I/O Translation Table describes topology of
para-virtual platforms, similarly to vendor tables DMAR, IVRS and IORT.
For now it describes the relation between virtio-iommu and the endpoints
it manages.
Three steps are needed to configure DMA of endpoints:
(1) acpi_viot_init(): parse the VIOT table, find or create the fwnode
associated to each vIOMMU device. This needs to happen after
acpi_scan_init(), because it relies on the struct device and their
fwnode to be available.
(2) When probing the vIOMMU device, the driver registers its IOMMU ops
within the IOMMU subsystem. This step doesn't require any
intervention from the VIOT driver.
(3) viot_iommu_configure(): before binding the endpoint to a driver,
find the associated IOMMU ops. Register them, along with the
endpoint ID, into the device's iommu_fwspec.
If step (3) happens before step (2), it is deferred until the IOMMU is
initialized, then retried.
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20210618152059.1194210-4-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Extract the code that sets up the IOMMU infrastructure from IORT, since
it can be reused by VIOT. Move it one level up into a new
acpi_iommu_configure_id() function, which calls the IORT parsing
function which in turn calls the acpi_iommu_fwspec_init() helper.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20210618152059.1194210-3-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Extract generic DMA setup code out of IORT, so it can be reused by VIOT.
Keep it in drivers/acpi/arm64 for now, since it could break x86
platforms that haven't run this code so far, if they have invalid
tables.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20210618152059.1194210-2-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Marvell Armada 3700 Functional Errata, Guidelines, and Restrictions
document describes in erratum 4.1 PCIe value of vendor ID (Ref #: 243):
The readback value of VEND_ID (RD0070000h [15:0]) is 1B4Bh, while it
should read 11ABh.
The firmware can write the correct value, 11ABh, through VEND_ID
(RD0076044h [15:0]).
Implement this workaround in aardvark driver for both PCI vendor id and PCI
subsystem vendor id.
This change affects and fixes PCI vendor id of emulated PCIe root bridge.
After this change emulated PCIe root bridge has correct vendor id.
Link: https://lore.kernel.org/r/20210624222621.4776-5-pali@kernel.org
Fixes: 8a3ebd8de3 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org
Use kmemdup() helper instead of open-coding to
simplify the code when allocate change_request.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Disable event reporting on suspend when the hid device is not
a wakeup-source. This should help save some extra power in this case.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Without a ll-driver callback hid_hw_may_wakeup() will return:
device_may_wakeup(hdev->dev.parent), but for the hid devices
instantiated by logitech-dj for devices behind the receiver the
logitech-dj hid(pp)-device is the parent.
Add a logi_dj_ll_may_wakeup() callback which calls hid_hw_may_wakeup()
on the logitech-dj hid(pp) parent-hid-device.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Without a ll-driver callback hid_hw_may_wakeup() will return:
device_may_wakeup(hdev->dev.parent), usb_hid_driver instantiated hid
devices have their parent set to the usb-interface to which the
usb_hid_driver is bound, but the power/wakeup* sysfs attributes are
part of the usb-device.
Add a may_wakeup ll-driver callback which calls device_may_wakeup()
on the usb-device instead.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a hid_hw_may_wakeup() function, which is the equivalent of
device_may_wakeup() for hid devices.
In most cases this just returns device_may_wakeup(hdev->dev.parent), but for
some ll-drivers this is not correct. E.g. usb_hid_driver instantiated hid
devices have their parent set to the usb-interface to which the usb_hid_driver
is bound, but the power/wakeup* sysfs attributes are part of the usb-device,
which is the usb-interface's parent.
For these special cases a new may_wakeup callback is added to
hid_ll_driver, so that ll-drivers can override the default behavior.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
