The 'litex_[set|get]_reg()' methods use the 'reg_size' parameter to
specify the width of the LiteX CSR (MMIO) register being accessed.
Since 'u64' is the widest data being supported, the value of 'reg_size'
MUST be between 1 and sizeof(u64), which SHOULD be checked at runtime
if these methods are publicly available for use by other LiteX device
drivers.
At the same time, none of the existing (or foreseeable) LiteX device
drivers have a need to access registers whose size is unknown during
compilation. As such, all LiteX device drivers should use fixed-width
accessor methods such as 'litex_[write|read][8|16|32|64]()'.
This patch renames 'litex_[set|get]_reg()' to '_litex_[set|get]_reg()',
indicating that they should NOT be directly called from outside of
the 'include/linux/litex.h' header file.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Upstream LiteX now defaults to using 32-bit CSR subregisters
(see a2b71fde).
This patch expands on commit 22447a99c9 ("drivers/soc/litex: add
LiteX SoC Controller driver"), adding support for handling both 8-
and 32-bit LiteX CSR (MMIO) subregisters, as determined by the
LITEX_SUBREG_SIZE Kconfig option.
NOTE that while LITEX_SUBREG_SIZE could theoretically be a device
tree property, defining it as a compile-time constant allows for
much better optimization of the resulting code. This is further
supported by the low expected usefulness of deploying the same
kernel across LiteX SoCs built with different CSR-Bus data widths.
Finally, the litex_[read|write][8|16|32|64]() accessors are
redefined in terms of litex_[get|set]_reg(), which, after compiler
optimization, will result in code as efficient as hardcoded shifts,
but with the added benefit of automatically matching the appropriate
LITEX_SUBREG_SIZE.
NOTE that litex_[get|set]_reg() nominally operate on 64-bit data,
but that will also be optimized by the compiler in situations where
narrower data is used from a call site.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
The constant LITEX_REG_SIZE is renamed to the more descriptive
LITEX_SUBREG_ALIGN (LiteX CSR subregisters are located at 32-bit
aligned MMIO addresses).
NOTE: this is a non-functional change.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Separate MMIO (read/write) access into _[read|write]_litex_subregister()
static inline functions, leaving existing "READ|WRITE" macros to handle
calculation of the subregister offset only.
NOTE: this is a non-functional change.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Move generic LiteX CSR (MMIO) register accessors to litex.h and
declare them as "static inline", in preparation for supporting
32-bit CSR subregisters and 64-bit CPUs.
NOTE: this is a non-functional change.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Add capability bit to test whether reg_c value is preserved on
recirculation.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This immutable branch replaces legacy gpio API in wm97xx_battery and
z2_battery with new gpiod API, which involves the drivers in
power-supply and some mach-pxa board files.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
-----BEGIN PGP SIGNATURE-----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=c7Ln
-----END PGP SIGNATURE-----
Merge tag 'ib-psy-pxa-for-5.12-signed' into psy-next
Immutable branch between mach-pxa and power-supply for for 5.12
This immutable branch replaces legacy gpio API in wm97xx_battery and
z2_battery with new gpiod API, which involves the drivers in
power-supply and some mach-pxa board files.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This converts the WM97xx driver to use a GPIO descriptor
instead of passing a GPIO number thru platform data.
Like everything else in the driver, use a simple local
variable for the descriptor, it can only ever appear in
one instance anyway so it should not hurt.
After converting the driver I noticed that none of the
boardfiles actually define a meaningful GPIO line for
this, but hey, it is converted.
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This converts the Palm Z2 battery driver to use GPIO descriptors.
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Some DMA device can benefit with higher order of alignment than the maximum
of 64 bytes currently defined.
Define 128 and 256 bytes alignment for these devices.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210113114923.9231-2-peter.ujfalusi@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Since I_DIRTY_TIME and I_DIRTY_INODE are mutually exclusive in i_state,
there's no need to check for I_DIRTY_TIME && !I_DIRTY_INODE. Just check
for I_DIRTY_TIME.
Also introduce a helper function in include/linux/fs.h to do this check.
Link: https://lore.kernel.org/r/20210112190253.64307-12-ebiggers@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The documentation for I_DIRTY_SYNC and I_DIRTY_DATASYNC is a bit
misleading, and I_DIRTY_TIME isn't documented at all. Fix this.
Link: https://lore.kernel.org/r/20210112190253.64307-3-ebiggers@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
This reverts commit 367c820ef0.
lockup_detector_init() makes heavy use of per-cpu variables and must be
called with preemption disabled. Usually, it's handled early during boot
in kernel_init_freeable(), before SMP has been initialised.
Since we do not know whether or not our PMU interrupt can be signalled
as an NMI until considerably later in the boot process, the Arm PMU
driver attempts to re-initialise the lockup detector off the back of a
device_initcall(). Unfortunately, this is called from preemptible
context and results in the following splat:
| BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
| caller is debug_smp_processor_id+0x20/0x2c
| CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.10.0+ #276
| Hardware name: linux,dummy-virt (DT)
| Call trace:
| dump_backtrace+0x0/0x3c0
| show_stack+0x20/0x6c
| dump_stack+0x2f0/0x42c
| check_preemption_disabled+0x1cc/0x1dc
| debug_smp_processor_id+0x20/0x2c
| hardlockup_detector_event_create+0x34/0x18c
| hardlockup_detector_perf_init+0x2c/0x134
| watchdog_nmi_probe+0x18/0x24
| lockup_detector_init+0x44/0xa8
| armv8_pmu_driver_init+0x54/0x78
| do_one_initcall+0x184/0x43c
| kernel_init_freeable+0x368/0x380
| kernel_init+0x1c/0x1cc
| ret_from_fork+0x10/0x30
Rather than bodge this with raw_smp_processor_id() or randomly disabling
preemption, simply revert the culprit for now until we figure out how to
do this properly.
Reported-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20201221162249.3119-1-lecopzer.chen@mediatek.com
Link: https://lore.kernel.org/r/20210112221855.10666-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The platform data header was only used to pass platform
data from board files. We now populate the regulators
exclusively from device tree, so the header contents can
be moved into the regulator drivers.
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201205004057.1712753-2-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The struct ab8500_regulator_platform_data was a leftover
since the days before we probed all regulators from the
device tree. The ab8500-ext regulator was the only used,
defining platform data and register intialization that
was never used for anything, a copy of a boardfile no
longer in use.
Delete the ab8500_regulator_platform_data and make the
ab8500-ext regulator reference the regulator init data
in the local file directly. We are 100% device tree
these days.
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201205004057.1712753-1-linus.walleij@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add USB host mode to the Tegra HDRC driver. This allows us to benefit from
support provided by the generic ChipIdea driver instead of duplicating the
effort in a separate ehci-tegra driver.
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Ion Agorria <ion@agorria.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201218120246.7759-6-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Support programming of waking up from a low power mode by implementing the
generic set_wakeup() callback of the USB PHY API.
Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Ion Agorria <ion@agorria.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201218120246.7759-3-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch moves the netlink related code of the CAN device infrastructure into
a separate file.
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20210111141930.693847-7-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch moves the skb related code of the CAN device infrastructure into a
separate file.
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20210111141930.693847-6-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch moves all CAN frame length related code of the CAN device
infrastructure into a separate file.
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20210111141930.693847-5-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch moves the bittiming related code of the CAN device infrastructure
into a separate file.
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20210111141930.693847-4-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The size of kasan_early_shadow_pte[] now is PTRS_PER_PTE which defined
to 512 for arm. This means that it only covers the prev Linux pte
entries, but not the HWTABLE pte entries for arm.
The reason it currently works is that the symbol kasan_early_shadow_page
immediately following kasan_early_shadow_pte in memory is page aligned,
which makes kasan_early_shadow_pte look like a 4KB size array. But we
can't ensure the order is always right with different compiler/linker,
or if more bss symbols are introduced.
We had a test with QEMU + vexpress：put a 512KB-size symbol with
attribute __section(".bss..page_aligned") after kasan_early_shadow_pte,
and poisoned it after kasan_early_init(). Then enabled CONFIG_KASAN, it
failed to boot up.
Link: https://lkml.kernel.org/r/20210109044622.8312-1-hailongliiu@yeah.net
Signed-off-by: Hailong Liu <liu.hailong6@zte.com.cn>
Signed-off-by: Ziliang Guo <guo.ziliang@zte.com.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Boot a CONFIG_MEMCG=y kernel with "cgroup_disabled=memory" and you are
met by a series of warnings from the VM_WARN_ON_ONCE_PAGE(!memcg, page)
recently added to the inline mem_cgroup_page_lruvec().
An earlier attempt to place that warning, in mem_cgroup_lruvec(), had
been careful to do so after weeding out the mem_cgroup_disabled() case;
but was itself invalid because of the mem_cgroup_lruvec(NULL, pgdat) in
clear_pgdat_congested() and age_active_anon().
Warning in mem_cgroup_page_lruvec() was once useful in detecting a KSM
charge bug, so may be worth keeping: but skip if mem_cgroup_disabled().
Link: https://lkml.kernel.org/r/alpine.LSU.2.11.2101032056260.1093@eggly.anvils
Fixes: 9a1ac2288c ("mm/memcontrol:rewrite mem_cgroup_page_lruvec()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hui Su <sh_def@163.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for directly accessing kernel module variables from BPF programs
using special ldimm64 instructions. This functionality builds upon vmlinux
ksym support, but extends ldimm64 with src_reg=BPF_PSEUDO_BTF_ID to allow
specifying kernel module BTF's FD in insn[1].imm field.
During BPF program load time, verifier will resolve FD to BTF object and will
take reference on BTF object itself and, for module BTFs, corresponding module
as well, to make sure it won't be unloaded from under running BPF program. The
mechanism used is similar to how bpf_prog keeps track of used bpf_maps.
One interesting change is also in how per-CPU variable is determined. The
logic is to find .data..percpu data section in provided BTF, but both vmlinux
and module each have their own .data..percpu entries in BTF. So for module's
case, the search for DATASEC record needs to look at only module's added BTF
types. This is implemented with custom search function.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20210112075520.4103414-6-andrii@kernel.org
__bpf_free_used_maps() is always defined in kernel/bpf/core.c, while
include/linux/bpf.h is guarding it behind CONFIG_BPF_SYSCALL. Move it out of
that guard region and fix compiler warning.
Fixes: a2ea07465c ("bpf: Fix missing prog untrack in release_maps")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210112075520.4103414-4-andrii@kernel.org
BPF interpreter uses extra input argument, so re-casts __bpf_call_base into
__bpf_call_base_args. Avoid compiler warning about incompatible function
prototypes by casting to void * first.
Fixes: 1ea47e01ad ("bpf: add support for bpf_call to interpreter")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210112075520.4103414-3-andrii@kernel.org
Add bpf_patch_call_args() prototype. This function is called from BPF verifier
and only if CONFIG_BPF_JIT_ALWAYS_ON is not defined. This fixes compiler
warning about missing prototype in some kernel configurations.
Fixes: 1ea47e01ad ("bpf: add support for bpf_call to interpreter")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210112075520.4103414-2-andrii@kernel.org
The platform data header is not included by any other file in
the kernel but the driver itself. Decomission the stand-alone
header and absorb it into the driver itself.
Cc: Chris Lapa <chris@lapa.com.au>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fix kernel-doc notation for 2 functions so that the generated
html is correct. Currently it skips all text between the
':' and the '-', so "[un]register a clock rate" is missing.
Fixes: 86bcfa2e87 ("clk: add pr_debug & kerneldoc around clk notifiers")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-clk@vger.kernel.org
Link: https://lore.kernel.org/r/20210107023304.24442-1-rdunlap@infradead.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
We want to be able to revoke pci mmaps so that the same access rules
applies as for /dev/kmem. Revoke support for devmem was added in
3234ac664a ("/dev/mem: Revoke mappings when a driver claims the
region").
The simplest way to achieve this is by having the same filp->f_mapping
for all mappings, so that unmap_mapping_range can find them all, no
matter through which file they've been created. Since this must be set
at open time we need sysfs support for this.
Add an optional mapping parameter bin_attr, which is only consulted
when there's also an mmap callback, since without mmap support
allowing to adjust the ->f_mapping makes no sense.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: linux-mm@kvack.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127164131.2244124-12-daniel.vetter@ffwll.ch
We want all iomem mmaps to consistently revoke ptes when the kernel
takes over and CONFIG_IO_STRICT_DEVMEM is enabled. This includes the
pci bar mmaps available through procfs and sysfs, which currently do
not revoke mappings.
To prepare for this, move the code from the /dev/kmem driver to
kernel/resource.c.
During review Jason spotted that barriers are used somewhat
inconsistently. Fix that up while we shuffle this code, since it
doesn't have an actual impact at runtime. Otherwise no semantic and
behavioural changes intended, just code extraction and adjusting
comments and names.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: linux-mm@kvack.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127164131.2244124-11-daniel.vetter@ffwll.ch
Way back it was a reasonable assumptions that iomem mappings never
change the pfn range they point at. But this has changed:
- gpu drivers dynamically manage their memory nowadays, invalidating
ptes with unmap_mapping_range when buffers get moved
- contiguous dma allocations have moved from dedicated carvetouts to
cma regions. This means if we miss the unmap the pfn might contain
pagecache or anon memory (well anything allocated with GFP_MOVEABLE)
- even /dev/mem now invalidates mappings when the kernel requests that
iomem region when CONFIG_IO_STRICT_DEVMEM is set, see 3234ac664a
("/dev/mem: Revoke mappings when a driver claims the region")
Accessing pfns obtained from ptes without holding all the locks is
therefore no longer a good idea. Fix this.
Since ioremap might need to manipulate pagetables too we need to drop
the pt lock and have a retry loop if we raced.
While at it, also add kerneldoc and improve the comment for the
vma_ops->access function. It's for accessing, not for moving the
memory from iomem to system memory, as the old comment seemed to
suggest.
References: 28b2ee20c7 ("access_process_vm device memory infrastructure")
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Benjamin Herrensmidt <benh@kernel.crashing.org>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: linux-mm@kvack.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127164131.2244124-8-daniel.vetter@ffwll.ch
It's the only user. This also garbage collects the CONFIG_FRAME_VECTOR
symbol from all over the tree (well just one place, somehow omap media
driver still had this in its Kconfig, despite not using it).
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: linux-mm@kvack.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127164131.2244124-7-daniel.vetter@ffwll.ch
This is used by media/videbuf2 for persistent dma mappings, not just
for a single dma operation and then freed again, so needs
FOLL_LONGTERM.
Unfortunately current pup_locked doesn't support FOLL_LONGTERM due to
locking issues. Rework the code to pull the pup path out from the
mmap_sem critical section as suggested by Jason.
By relying entirely on the vma checks in pin_user_pages and follow_pfn
(for vm_flags and vma_is_fsdax) we can also streamline the code a lot.
Note that pin_user_pages_fast is a safe replacement despite the
seeming lack of checking for vma->vm_flasg & (VM_IO | VM_PFNMAP). Such
ptes are marked with pte_mkspecial (which pup_fast rejects in the
fastpath), and only architectures supporting that support the
pin_user_pages_fast fastpath.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: linux-mm@kvack.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-media@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127164131.2244124-6-daniel.vetter@ffwll.ch
skb_seq_read iterates over an skb, returning pointer and length of
the next data range with each call.
It relies on kmap_atomic to access highmem pages when needed.
An skb frag may be backed by a compound page, but kmap_atomic maps
only a single page. There are not enough kmap slots to always map all
pages concurrently.
Instead, if kmap_atomic is needed, iterate over each page.
As this increases the number of calls, avoid this unless needed.
The necessary condition is captured in skb_frag_must_loop.
I tried to make the change as obvious as possible. It should be easy
to verify that nothing changes if skb_frag_must_loop returns false.
Tested:
On an x86 platform with
CONFIG_HIGHMEM=y
CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP=y
CONFIG_NETFILTER_XT_MATCH_STRING=y
Run
ip link set dev lo mtu 1500
iptables -A OUTPUT -m string --string 'badstring' -algo bm -j ACCEPT
dd if=/dev/urandom of=in bs=1M count=20
nc -l -p 8000 > /dev/null &
nc -w 1 -q 0 localhost 8000 < in
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Skb frags may be backed by highmem and/or compound pages. Highmem
pages need kmap_atomic mappings to access. But kmap_atomic maps a
single page, not the entire compound page.
skb_foreach_page iterates over an skb frag, in one step in the common
case, page by page only if kmap_atomic must be called for each page.
The decision logic is captured in skb_frag_must_loop.
CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP extends kmap from highmem to all
pages, to increase code coverage.
Extend skb_frag_must_loop to this new condition.
Link: https://lore.kernel.org/linux-mm/20210106180132.41dc249d@gandalf.local.home/
Fixes: 0e91a0c698 ("mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP")
Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current perf init will failed with:
[ 1.452433] csky-pmu: probe of soc:pmu failed with error -16
This patch fix it up with adding CPUHP_AP_PERF_CSKY_ONLINE in
cpuhotplug.h.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Users of pci_resize_resource() need a way to calculate BAR size
from desired bytes. Add a helper function and export it so that
modular drivers can use it.
Signed-off-by: Darren Salt <devspam@moreofthesa.me.uk>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20210107175017.15893-3-nirmoy.das@amd.com
Here are a number of small USB driver fixes for 5.11-rc3.
Include in here are:
- USB gadget driver fixes for reported issues
- new usb-serial driver ids
- dma from stack bugfixes
- typec bugfixes
- dwc3 bugfixes
- xhci driver bugfixes
- other small misc usb driver bugfixes
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX/sKZg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynVlgCgtLrjhpvxkW/TegCp3kuvsI7Kj0UAniYFwZG1
1KKr2rrignh3vLMmkCAp
=IR1N
-----END PGP SIGNATURE-----
Merge tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for 5.11-rc3.
Include in here are:
- USB gadget driver fixes for reported issues
- new usb-serial driver ids
- dma from stack bugfixes
- typec bugfixes
- dwc3 bugfixes
- xhci driver bugfixes
- other small misc usb driver bugfixes
All of these have been in linux-next with no reported issues"
* tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits)
usb: dwc3: gadget: Clear wait flag on dequeue
usb: typec: Send uevent for num_altmodes update
usb: typec: Fix copy paste error for NVIDIA alt-mode description
usb: gadget: enable super speed plus
kcov, usb: hide in_serving_softirq checks in __usb_hcd_giveback_urb
usb: uas: Add PNY USB Portable SSD to unusual_uas
usb: gadget: configfs: Preserve function ordering after bind failure
usb: gadget: select CONFIG_CRC32
usb: gadget: core: change the comment for usb_gadget_connect
usb: gadget: configfs: Fix use-after-free issue with udc_name
usb: dwc3: gadget: Restart DWC3 gadget when enabling pullup
usb: usbip: vhci_hcd: protect shift size
USB: usblp: fix DMA to stack
USB: serial: iuu_phoenix: fix DMA from stack
USB: serial: option: add LongSung M5710 module support
USB: serial: option: add Quectel EM160R-GL
USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug
usb: gadget: f_uac2: reset wMaxPacketSize
usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression
usb: dwc3: ulpi: Replace CPU-based busyloop with Protocol-based one
...
syscalls which take 64-bit arguments to the compat handlers due to
former having a general compat handler. (Brian Gerst)
- Add a forgotten pmd page destructor call to pud_free_pmd_page() where
a pmd page is freed. (Dan Williams)
- Make IN/OUT insns with an u8 immediate port operand handling for
SEV-ES guests more precise by using only the single port byte and not
the whole s32 value of the insn decoder. (Peter Gonda)
- Correct a straddling end range check before returning the proper MTRR
type, when the end address is the same as top of memory. (Ying-Tsun
Huang)
- Change PQR_ASSOC MSR update scheme when moving a task to a resctrl
resource group to avoid significant performance overhead with some
resctrl workloads. (Fenghua Yu)
- Avoid the actual task move overhead when the task is already in the
resource group. (Fenghua Yu)
-----BEGIN PGP SIGNATURE-----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=2/Eq
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.11_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"As expected, fixes started trickling in after the holidays so here is
the accumulated pile of x86 fixes for 5.11:
- A fix for fanotify_mark() missing the conversion of x86_32 native
syscalls which take 64-bit arguments to the compat handlers due to
former having a general compat handler. (Brian Gerst)
- Add a forgotten pmd page destructor call to pud_free_pmd_page()
where a pmd page is freed. (Dan Williams)
- Make IN/OUT insns with an u8 immediate port operand handling for
SEV-ES guests more precise by using only the single port byte and
not the whole s32 value of the insn decoder. (Peter Gonda)
- Correct a straddling end range check before returning the proper
MTRR type, when the end address is the same as top of memory.
(Ying-Tsun Huang)
- Change PQR_ASSOC MSR update scheme when moving a task to a resctrl
resource group to avoid significant performance overhead with some
resctrl workloads. (Fenghua Yu)
- Avoid the actual task move overhead when the task is already in the
resource group. (Fenghua Yu)"
* tag 'x86_urgent_for_v5.11_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Don't move a task to the same resource group
x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR
x86/mtrr: Correct the range check before performing MTRR type lookups
x86/sev-es: Fix SEV-ES OUT/IN immediate opcode vc handling
x86/mm: Fix leak of pmd ptlock
fanotify: Fix sys_fanotify_mark() on native x86-32
GRO_DROP can only be returned from napi_gro_frags()
if the skb has not been allocated by a prior napi_get_frags()
Since drivers must use napi_get_frags() and test its result
before populating the skb with metadata, we can safely remove
GRO_DROP since it offers no practical use.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Define stub functions for the exposed MDT functions in case
QCOM_MDT_LOADER is not configured. This allows users of these
functions to link correctly for COMPILE_TEST builds without
QCOM_SCM enabled.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stub functions are defined for SSR notifier registration in case
QCOM_RPROC_COMMON is not configured. As a result, code that uses
these functions can link successfully even if the common remoteproc
code is not built.
Code that registers an SSR notifier function likely needs the
types defined in "qcom_rproc.h", but those are only exposed if
QCOM_RPROC_COMMON is enabled.
Rearrange the conditional definition so the qcom_ssr_notify_data
structure and qcom_ssr_notify_type enumerated type are defined
whether or not QCOM_RPROC_COMMON is enabled.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Drop two local variables that are never read and the code updating
their values from the x86 suspend-to-idle code (Rafael Wysocki).
- Add empty stub of an ACPI helper function to avoid build issues
when CONFIG_ACPI is not set (Shawn Guo).
- Remove confusing text regarding modules from Kconfig entries that
correspond to non-modular code (Peter Robinson).
-----BEGIN PGP SIGNATURE-----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=9ssW
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These address two build issues and drop confusing text from a couple
of Kconfig entries.
Specifics:
- Drop two local variables that are never read and the code updating
their values from the x86 suspend-to-idle code (Rafael Wysocki)
- Add empty stub of an ACPI helper function to avoid build issues
when CONFIG_ACPI is not set (Shawn Guo)
- Remove confusing text regarding modules from Kconfig entries that
correspond to non-modular code (Peter Robinson)"
* tag 'acpi-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: Update Kconfig help text for items that are no longer modular
ACPI: scan: add stub acpi_create_platform_device() for !CONFIG_ACPI
ACPI: PM: s2idle: Drop unused local variables and related code
