Move some EFI related declarations that are only referenced on IA64 to
a new asm/efi.h arch header.
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Introduce a bitfield to allow the drivers to announce the available
features for an RTC.
The main use case would be to better handle alarms, that could be present
or not or have a minute resolution or may need a correct week day to be set.
Use the newly introduced RTC_FEATURE_ALARM bit to then test whether alarms
are available instead of relying on the presence of ops->set_alarm.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210110231752.1418816-2-alexandre.belloni@bootlin.com
similar to d_find_alias(inode), except that
* the caller must be holding rcu_read_lock()
* inode must not be freed until matching rcu_read_unlock()
* result is *NOT* pinned and can only be dereferenced until
the matching rcu_read_unlock().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
qcom_vadc7_scale_hw_calib_die_temp() uses a table format different from
the rest of volt/temp conversion functions in this file. Also the
conversion functions results in non-monothonic values conversion, which
seems wrong.
Rewrite qcom_vadc7_scale_hw_calib_die_temp() to use
qcom_vadc_map_voltage_temp() directly, like the rest of conversion
functions do.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201204025509.1075506-10-dmitry.baryshkov@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
struct vadc_map_pt is not used outside of qcom-vadc-common.c, so move it
there from the global header file.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201204025509.1075506-9-dmitry.baryshkov@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There might be cases when the IIO channel is attached to the device
subnode instead of being attached to the main device node. Allow drivers
to query IIO channels by using device tree nodes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201204025509.1075506-8-dmitry.baryshkov@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
qcom-vadc-common module will be used by ADC thermal monitoring driver,
so move it to global include dir.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201204025509.1075506-6-dmitry.baryshkov@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Adds a function to interpolate against two points,
this is carried arount as a helper function by tons of drivers.
Signed-off-by: Craig Tatlor <ctatlor97@gmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201204025509.1075506-3-dmitry.baryshkov@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
- Select missing Kconfig dependencies for DM integrity and zoned
targets.
- 4 fixes for DM crypt target's support to optionally bypass
kcryptd workqueues.
- Fix DM snapshot merge supports missing data flushes before
committing metadata.
- Fix DM integrity data device flushing when external metadata is
used.
- Fix DM integrity's maximum number of supported constructor arguments
that user can request when creating an integrity device.
- Eliminate DM core ioctl logging noise when an ioctl is issued
without required CAP_SYS_RAWIO permission.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmACJwsTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWr93B/sFpKbCjRxZhGdOz8u2UIV9jGoSzAaZ
3qdSTruCp1HMTsz0J/+bFBTMQKKap+8u8kzhCOLAqtZgEz13P0D3NyDUGiCxj07O
vPZJQ3COrClknq5byKws/aOKcnbr25odk6Zq+gFmk47pdNFBMkzNMf0IbdVJsj19
d0tnTRkIiycC8hnXOr/tHufnmERrw9nZpq3cLEHT6vaXc4FxcYXbo4UEMIwKjgcB
AnsRrqpqKyayG+G/SEs01JM9eYznWRPqf3L03wTWfieAsFjDoIp/ek8iXWjEwLtZ
BnhxFwodWvycFb9ITaxlFgfyiBSgU1f3tsIYjU4MHCSFI6u5b83y57Dl
=FnV7
-----END PGP SIGNATURE-----
Merge tag 'for-5.11/dm-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM-raid's raid1 discard limits so discards work.
- Select missing Kconfig dependencies for DM integrity and zoned
targets.
- Four fixes for DM crypt target's support to optionally bypass kcryptd
workqueues.
- Fix DM snapshot merge supports missing data flushes before committing
metadata.
- Fix DM integrity data device flushing when external metadata is used.
- Fix DM integrity's maximum number of supported constructor arguments
that user can request when creating an integrity device.
- Eliminate DM core ioctl logging noise when an ioctl is issued without
required CAP_SYS_RAWIO permission.
* tag 'for-5.11/dm-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm crypt: defer decryption to a tasklet if interrupts disabled
dm integrity: fix the maximum number of arguments
dm crypt: do not call bio_endio() from the dm-crypt tasklet
dm integrity: fix flush with external metadata device
dm: eliminate potential source of excessive kernel log noise
dm snapshot: flush merged data before committing metadata
dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq
dm crypt: do not wait for backlogged crypto request completion in softirq
dm zoned: select CONFIG_CRC32
dm integrity: select CRYPTO_SKCIPHER
dm raid: fix discard limits for raid1
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-01-16
1) Extend atomic operations to the BPF instruction set along with x86-64 JIT support,
that is, atomic{,64}_{xchg,cmpxchg,fetch_{add,and,or,xor}}, from Brendan Jackman.
2) Add support for using kernel module global variables (__ksym externs in BPF
programs) retrieved via module's BTF, from Andrii Nakryiko.
3) Generalize BPF stackmap's buildid retrieval and add support to have buildid
stored in mmap2 event for perf, from Jiri Olsa.
4) Various fixes for cross-building BPF sefltests out-of-tree which then will
unblock wider automated testing on ARM hardware, from Jean-Philippe Brucker.
5) Allow to retrieve SOL_SOCKET opts from sock_addr progs, from Daniel Borkmann.
6) Clean up driver's XDP buffer init and split into two helpers to init per-
descriptor and non-changing fields during processing, from Lorenzo Bianconi.
7) Minor misc improvements to libbpf & bpftool, from Ian Rogers.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (41 commits)
perf: Add build id data in mmap2 event
bpf: Add size arg to build_id_parse function
bpf: Move stack_map_get_build_id into lib
bpf: Document new atomic instructions
bpf: Add tests for new BPF atomic operations
bpf: Add bitwise atomic instructions
bpf: Pull out a macro for interpreting atomic ALU operations
bpf: Add instructions for atomic_[cmp]xchg
bpf: Add BPF_FETCH field / create atomic_fetch_add instruction
bpf: Move BPF_STX reserved field check into BPF_STX verifier code
bpf: Rename BPF_XADD and prepare to encode other atomics in .imm
bpf: x86: Factor out a lookup table for some ALU opcodes
bpf: x86: Factor out emission of REX byte
bpf: x86: Factor out emission of ModR/M for *(reg + off)
tools/bpftool: Add -Wall when building BPF programs
bpf, libbpf: Avoid unused function warning on bpf_tail_call_static
selftests/bpf: Install btf_dump test cases
selftests/bpf: Fix installation of urandom_read
selftests/bpf: Move generated test files to $(TEST_GEN_FILES)
selftests/bpf: Fix out-of-tree build
...
====================
Link: https://lore.kernel.org/r/20210116012922.17823-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge misc fixes from Andrew Morton:
"10 patches.
Subsystems affected by this patch series: MAINTAINERS and mm (slub,
pagealloc, memcg, kasan, vmalloc, migration, hugetlb, memory-failure,
and process_vm_access)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/process_vm_access.c: include compat.h
mm,hwpoison: fix printing of page flags
MAINTAINERS: add Vlastimil as slab allocators maintainer
mm/hugetlb: fix potential missing huge page size info
mm: migrate: initialize err in do_migrate_pages
mm/vmalloc.c: fix potential memory leak
arm/kasan: fix the array size of kasan_early_shadow_pte[]
mm/memcontrol: fix warning in mem_cgroup_page_lruvec()
mm/page_alloc: add a missing mm_page_alloc_zone_locked() tracepoint
mm, slub: consider rest of partial list if acquire_slab() fails
- Set the minimum GCC version to 5.1 for arm64 due to earlier compiler
bugs.
- Make atomic helpers __always_inline to avoid a section mismatch when
compiling with clang.
- Fix the CMA and crashkernel reservations to use ZONE_DMA (remove the
arm64_dma32_phys_limit variable, no longer needed with a dynamic
ZONE_DMA sizing in 5.11).
- Remove redundant IRQ flag tracing that was leaving lockdep
inconsistent with the hardware state.
- Revert perf events based hard lockup detector that was causing
smp_processor_id() to be called in preemptible context.
- Some trivial cleanups - spelling fix, renaming S_FRAME_SIZE to
PT_REGS_SIZE, function prototypes added.
-----BEGIN PGP SIGNATURE-----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=W9th
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Set the minimum GCC version to 5.1 for arm64 due to earlier compiler
bugs.
- Make atomic helpers __always_inline to avoid a section mismatch when
compiling with clang.
- Fix the CMA and crashkernel reservations to use ZONE_DMA (remove the
arm64_dma32_phys_limit variable, no longer needed with a dynamic
ZONE_DMA sizing in 5.11).
- Remove redundant IRQ flag tracing that was leaving lockdep
inconsistent with the hardware state.
- Revert perf events based hard lockup detector that was causing
smp_processor_id() to be called in preemptible context.
- Some trivial cleanups - spelling fix, renaming S_FRAME_SIZE to
PT_REGS_SIZE, function prototypes added.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: selftests: Fix spelling of 'Mismatch'
arm64: syscall: include prototype for EL0 SVC functions
compiler.h: Raise minimum version of GCC to 5.1 for arm64
arm64: make atomic helpers __always_inline
arm64: rename S_FRAME_SIZE to PT_REGS_SIZE
Revert "arm64: Enable perf events based hard lockup detector"
arm64: entry: remove redundant IRQ flag tracing
arm64: Remove arm64_dma32_phys_limit and its uses
This helper will register a software node and then assign
it to device at the same time. The function will also make
sure that the device can't have more than one software node.
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210115094914.88401-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver core ignores the return value of struct device_driver::remove
because there is only little that can be done. To simplify the quest to
make this function return void, let struct sunxi_rsb_driver::remove
return void, too. All users already unconditionally return 0, this
commit makes this obvious and ensures future users don't behave
differently. To simplify even further, make axp20x_device_remove()
return void instead of returning 0 unconditionally, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
GCC versions >= 4.9 and < 5.1 have been shown to emit memory references
beyond the stack pointer, resulting in memory corruption if an interrupt
is taken after the stack pointer has been adjusted but before the
reference has been executed. This leads to subtle, infrequent data
corruption such as the EXT4 problems reported by Russell King at the
link below.
Life is too short for buggy compilers, so raise the minimum GCC version
required by arm64 to 5.1.
Reported-by: Russell King <linux@armlinux.org.uk>
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20210105154726.GD1551@shell.armlinux.org.uk
Link: https://lore.kernel.org/r/20210112224832.10980-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The IMA hook ima_measure_critical_data() does not support a way to
specify the source of the critical data provider. Thus, the data
measurement cannot be constrained based on the data source label
in the IMA policy.
Extend the IMA hook ima_measure_critical_data() to support passing
the data source label as an input parameter, so that the policy rule can
be used to limit the measurements based on the label.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
IMA provides capabilities to measure file and buffer data. However,
various data structures, policies, and states stored in kernel memory
also impact the integrity of the system. Several kernel subsystems
contain such integrity critical data. These kernel subsystems help
protect the integrity of the system. Currently, IMA does not provide a
generic function for measuring kernel integrity critical data.
Define ima_measure_critical_data, a new IMA hook, to measure kernel
integrity critical data.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
It's possible to have other build id types (other than default SHA1).
Currently there's also ld support for MD5 build id.
Adding size argument to build_id_parse function, that returns (if defined)
size of the parsed build id, so we can recognize the build id type.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210114134044.1418404-3-jolsa@kernel.org
Moving stack_map_get_build_id into lib with
declaration in linux/buildid.h header:
int build_id_parse(struct vm_area_struct *vma, unsigned char *build_id);
This function returns build id for given struct vm_area_struct.
There is no functional change to stack_map_get_build_id function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210114134044.1418404-2-jolsa@kernel.org
This adds instructions for
atomic[64]_[fetch_]and
atomic[64]_[fetch_]or
atomic[64]_[fetch_]xor
All these operations are isomorphic enough to implement with the same
verifier, interpreter, and x86 JIT code, hence being a single commit.
The main interesting thing here is that x86 doesn't directly support
the fetch_ version these operations, so we need to generate a CMPXCHG
loop in the JIT. This requires the use of two temporary registers,
IIUC it's safe to use BPF_REG_AX and x86's AUX_REG for this purpose.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-10-jackmanb@google.com
This adds two atomic opcodes, both of which include the BPF_FETCH
flag. XCHG without the BPF_FETCH flag would naturally encode
atomic_set. This is not supported because it would be of limited
value to userspace (it doesn't imply any barriers). CMPXCHG without
BPF_FETCH woulud be an atomic compare-and-write. We don't have such
an operation in the kernel so it isn't provided to BPF either.
There are two significant design decisions made for the CMPXCHG
instruction:
- To solve the issue that this operation fundamentally has 3
operands, but we only have two register fields. Therefore the
operand we compare against (the kernel's API calls it 'old') is
hard-coded to be R0. x86 has similar design (and A64 doesn't
have this problem).
A potential alternative might be to encode the other operand's
register number in the immediate field.
- The kernel's atomic_cmpxchg returns the old value, while the C11
userspace APIs return a boolean indicating the comparison
result. Which should BPF do? A64 returns the old value. x86 returns
the old value in the hard-coded register (and also sets a
flag). That means return-old-value is easier to JIT, so that's
what we use.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-8-jackmanb@google.com
The BPF_FETCH field can be set in bpf_insn.imm, for BPF_ATOMIC
instructions, in order to have the previous value of the
atomically-modified memory location loaded into the src register
after an atomic op is carried out.
Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-7-jackmanb@google.com
A subsequent patch will add additional atomic operations. These new
operations will use the same opcode field as the existing XADD, with
the immediate discriminating different operations.
In preparation, rename the instruction mode BPF_ATOMIC and start
calling the zero immediate BPF_ADD.
This is possible (doesn't break existing valid BPF progs) because the
immediate field is currently reserved MBZ and BPF_ADD is zero.
All uses are removed from the tree but the BPF_XADD definition is
kept around to avoid breaking builds for people including kernel
headers.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-5-jackmanb@google.com
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAl//+AATHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqcUHB/95XfZ9zFpizYDxEich0LZx9KDxNp93
104KJ0BAdgAqbe4cZaDN8Y7nZbsC1V7+aiq1wlAkY07P75V0fasd4WlB+a7F9IQv
w/chycUkemmjjk8lNLMvCWZeKB4/i+e/BV78avJs0CFkzQer6RKLVL9j3FgRqtia
RT7rrWDvRtfr2uGezBao7/vpFrlDqfp/sjZ0rnG/bhIMlq2uk5U/44F6dtKmgHR8
UxfN/6NT8LwTWOeIjXoR9tL8EI44AoCpjNQAgozbxmM+Nph17SE0eJdAYUUEBNDu
Fogrwl8gqI1UbWRMkwDoEUZTurczXRUin+dTPZtTsQ+1iDLvItg+HKTg
=0oq2
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.12-20210114' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2021-01-14
The first two patches update the MAINTAINERS file, Lukas Bulwahn's patch fixes
the files entry for the tcan4x5x driver, which was broken by me in net-next.
A patch by me adds the a missing header file to the CAN Networking Layer.
The next 5 patches are by me and split the the CAN driver related
infrastructure code into more files in a separate subdir. The next two patches
by me clean up the CAN length related code. This is followed by 6 patches by
Vincent Mailhol and me, they add helper code for for CAN frame length
calculation neede for BQL support.
A patch by Vincent Mailhol adds software TX timestamp support.
The last patch is by me, targets the tcan4x5x driver, and removes the unneeded
__packed attribute from the struct tcan4x5x_map_buf.
* tag 'linux-can-next-for-5.12-20210114' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: tcan4x5x: remove __packed attribute from struct tcan4x5x_map_buf
can: dev: can_put_echo_skb(): add software tx timestamps
can: dev: can_rx_offload_get_echo_skb(): extend to return can frame length
can: dev: can_get_echo_skb(): extend to return can frame length
can: dev: can_put_echo_skb(): extend to handle frame_len
can: dev: extend struct can_skb_priv to hold CAN frame length
can: length: can_skb_get_frame_len(): introduce function to get data length of frame in data link layer
can: length: canfd_sanitize_len(): add function to sanitize CAN-FD data length
can: length: can_fd_len2dlc(): simplify length calculcation
can: length: convert to kernel coding style
can: dev: move netlink related code into seperate file
can: dev: move skb related into seperate file
can: dev: move length related code into seperate file
can: dev: move bittiming related code into seperate file
can: dev: move driver related infrastructure into separate subdir
MAINTAINERS: CAN network layer: add missing header file can-ml.h
MAINTAINERS: adjust entry to tcan4x5x file split
====================
Link: https://lore.kernel.org/r/20210114075617.1402597-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sparx-5 supports this mode and it is missing in the PHY core.
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This change adds a new function, anon_inode_getfd_secure, that creates
anonymous-node file with individual non-S_PRIVATE inode to which security
modules can apply policy. Existing callers continue using the original
singleton-inode kind of anonymous-inode file. We can transition anonymous
inode users to the new kind of anonymous inode in individual patches for
the sake of bisection and review.
The new function accepts an optional context_inode parameter that callers
can use to provide additional contextual information to security modules.
For example, in case of userfaultfd, the created inode is a 'logical child'
of the context_inode (userfaultfd inode of the parent process) in the sense
that it provides the security context required during creation of the child
process' userfaultfd inode.
Signed-off-by: Daniel Colascione <dancol@google.com>
[LG: Delete obsolete comments to alloc_anon_inode()]
[LG: Add context_inode description in comments to anon_inode_getfd_secure()]
[LG: Remove definition of anon_inode_getfile_secure() as there are no callers]
[LG: Make __anon_inode_getfile() static]
[LG: Use correct error cast in __anon_inode_getfile()]
[LG: Fix error handling in __anon_inode_getfile()]
Signed-off-by: Lokesh Gidra <lokeshgidra@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This change adds a new LSM hook, inode_init_security_anon(), that will
be used while creating secure anonymous inodes. The hook allows/denies
its creation and assigns a security context to the inode.
The new hook accepts an optional context_inode parameter that callers
can use to provide additional contextual information to security modules
for granting/denying permission to create an anon-inode of the same type.
This context_inode's security_context can also be used to initialize the
newly created anon-inode's security_context.
Signed-off-by: Lokesh Gidra <lokeshgidra@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Current release - regressions:
- fix feature enforcement to allow NETIF_F_HW_TLS_TX
if IP_CSUM && IPV6_CSUM
- dcb: accept RTM_GETDCB messages carrying set-like DCB commands
if user is admin for backward-compatibility
- selftests/tls: fix selftests build after adding ChaCha20-Poly1305
Current release - always broken:
- ppp: fix refcount underflow on channel unbridge
- bnxt_en: clear DEFRAG flag in firmware message when retry flashing
- smc: fix out of bound access in the new netlink interface
Previous releases - regressions:
- fix use-after-free with UDP GRO by frags
- mptcp: better msk-level shutdown
- rndis_host: set proper input size for OID_GEN_PHYSICAL_MEDIUM request
- i40e: xsk: fix potential NULL pointer dereferencing
Previous releases - always broken:
- skb frag: kmap_atomic fixes
- avoid 32 x truesize under-estimation for tiny skbs
- fix issues around register_netdevice() failures
- udp: prevent reuseport_select_sock from reading uninitialized socks
- dsa: unbind all switches from tree when DSA master unbinds
- dsa: clear devlink port type before unregistering slave netdevs
- can: isotp: isotp_getname(): fix kernel information leak
- mlxsw: core: Thermal control fixes
- ipv6: validate GSO SKB against MTU before finish IPv6 processing
- stmmac: use __napi_schedule() for PREEMPT_RT
- net: mvpp2: remove Pause and Asym_Pause support
Misc:
- remove from MAINTAINERS folks who had been inactive for >5yrs
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=e8t6
-----END PGP SIGNATURE-----
Merge tag 'net-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"We have a few fixes for long standing issues, in particular Eric's fix
to not underestimate the skb sizes, and my fix for brokenness of
register_netdevice() error path. They may uncover other bugs so we
will keep an eye on them. Also included are Willem's fixes for
kmap(_atomic).
Looking at the "current release" fixes, it seems we are about one rc
behind a normal cycle. We've previously seen an uptick of "people had
run their test suites" / "humans actually tried to use new features"
fixes between rc2 and rc3.
Summary:
Current release - regressions:
- fix feature enforcement to allow NETIF_F_HW_TLS_TX if IP_CSUM &&
IPV6_CSUM
- dcb: accept RTM_GETDCB messages carrying set-like DCB commands if
user is admin for backward-compatibility
- selftests/tls: fix selftests build after adding ChaCha20-Poly1305
Current release - always broken:
- ppp: fix refcount underflow on channel unbridge
- bnxt_en: clear DEFRAG flag in firmware message when retry flashing
- smc: fix out of bound access in the new netlink interface
Previous releases - regressions:
- fix use-after-free with UDP GRO by frags
- mptcp: better msk-level shutdown
- rndis_host: set proper input size for OID_GEN_PHYSICAL_MEDIUM
request
- i40e: xsk: fix potential NULL pointer dereferencing
Previous releases - always broken:
- skb frag: kmap_atomic fixes
- avoid 32 x truesize under-estimation for tiny skbs
- fix issues around register_netdevice() failures
- udp: prevent reuseport_select_sock from reading uninitialized socks
- dsa: unbind all switches from tree when DSA master unbinds
- dsa: clear devlink port type before unregistering slave netdevs
- can: isotp: isotp_getname(): fix kernel information leak
- mlxsw: core: Thermal control fixes
- ipv6: validate GSO SKB against MTU before finish IPv6 processing
- stmmac: use __napi_schedule() for PREEMPT_RT
- net: mvpp2: remove Pause and Asym_Pause support
Misc:
- remove from MAINTAINERS folks who had been inactive for >5yrs"
* tag 'net-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
mptcp: fix locking in mptcp_disconnect()
net: Allow NETIF_F_HW_TLS_TX if IP_CSUM && IPV6_CSUM
MAINTAINERS: dccp: move Gerrit Renker to CREDITS
MAINTAINERS: ipvs: move Wensong Zhang to CREDITS
MAINTAINERS: tls: move Aviad to CREDITS
MAINTAINERS: ena: remove Zorik Machulsky from reviewers
MAINTAINERS: vrf: move Shrijeet to CREDITS
MAINTAINERS: net: move Alexey Kuznetsov to CREDITS
MAINTAINERS: altx: move Jay Cliburn to CREDITS
net: avoid 32 x truesize under-estimation for tiny skbs
nt: usb: USB_RTL8153_ECM should not default to y
net: stmmac: fix taprio configuration when base_time is in the past
net: stmmac: fix taprio schedule configuration
net: tip: fix a couple kernel-doc markups
net: sit: unregister_netdevice on newlink's error path
net: stmmac: Fixed mtu channged by cache aligned
cxgb4/chtls: Fix tid stuck due to wrong update of qid
i40e: fix potential NULL pointer dereferencing
net: stmmac: use __napi_schedule() for PREEMPT_RT
can: mcp251xfd: mcp251xfd_handle_rxif_one(): fix wrong NULL pointer check
...
With Clang's Link Time Optimization (LTO), the compiler can rename
static functions to avoid global naming collisions. As PCI fixup
functions are typically static, renaming can break references
to them in inline assembly. This change adds a global stub to
DECLARE_PCI_FIXUP_SECTION to fix the issue when PREL32 relocations
are used.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-10-samitolvanen@google.com
With LTO, the compiler can rename static functions to avoid global
naming collisions. As initcall functions are typically static,
renaming can break references to them in inline assembly. This
change adds a global stub with a stable name for each initcall to
fix the issue when PREL32 relocations are used.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-9-samitolvanen@google.com
With LTO, the compiler doesn't necessarily obey the link order for
initcalls, and initcall variables need globally unique names to avoid
collisions at link time.
This change exports __KBUILD_MODNAME and adds the initcall_id() macro,
which uses it together with __COUNTER__ and __LINE__ to help ensure
these variables have unique names, and moves each variable to its own
section when LTO is enabled, so the correct order can be specified using
a linker script.
The generate_initcall_ordering.pl script uses nm to find initcalls from
the object files passed to the linker, and generates a linker script
that specifies the same order for initcalls that we would have without
LTO. With LTO enabled, the script is called in link-vmlinux.sh through
jobserver-exec to limit the number of jobs spawned.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-8-samitolvanen@google.com
Arnd found a randconfig that produces the warning:
arch/x86/entry/thunk_64.o: warning: objtool: missing symbol for insn at
offset 0x3e
when building with LLVM_IAS=1 (Clang's integrated assembler). Josh
notes:
With the LLVM assembler not generating section symbols, objtool has no
way to reference this code when it generates ORC unwinder entries,
because this code is outside of any ELF function.
The limitation now being imposed by objtool is that all code must be
contained in an ELF symbol. And .L symbols don't create such symbols.
So basically, you can use an .L symbol *inside* a function or a code
segment, you just can't use the .L symbol to contain the code using a
SYM_*_START/END annotation pair.
Fangrui notes that this optimization is helpful for reducing image size
when compiling with -ffunction-sections and -fdata-sections. I have
observed on the order of tens of thousands of symbols for the kernel
images built with those flags.
A patch has been authored against GNU binutils to match this behavior
of not generating unused section symbols ([1]), so this will
also become a problem for users of GNU binutils once they upgrade to 2.36.
Omit the .L prefix on a label so that the assembler will emit an entry
into the symbol table for the label, with STB_LOCAL binding. This
enables objtool to generate proper unwind info here with LLVM_IAS=1 or
GNU binutils 2.36+.
[ bp: Massage commit message. ]
Reported-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Suggested-by: Borislav Petkov <bp@alien8.de>
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20210112194625.4181814-1-ndesaulniers@google.com
Link: https://github.com/ClangBuiltLinux/linux/issues/1209
Link: https://reviews.llvm.org/D93783
Link: https://sourceware.org/binutils/docs/as/Symbol-Names.html
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d1bcae833b32f1408485ce69f844dcd7ded093a8 [1]
No one checks the return value of memblock_free_all().
Make the return value void.
memblock_free_all() is used on mem_init() for each
architecture, and the total count of freed pages will be added
to _totalram_pages variable by calling totalram_pages_add().
so do not need to return total count of freed pages.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
The new PMIC BD9574MWF inherits features from BD9571MWV.
Add the support of new PMIC to existing bd9571mwv driver.
Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@renesas.com>
Co-developed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Since the driver supports BD9571MWV PMIC only, this patch makes
the functions and data structure become more generic so that
it can support other PMIC variants as well. Also remove printing
part name which Lee Jones suggested.
Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@renesas.com>
Co-developed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Use the SPDX license identifier instead of a local description.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add chip IDs for BD9571MWV and BD9574MWF.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The local_lock_t's are special, because they cannot form IRQ
inversions, make sure we can tell them apart from the rest of the
locks.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
There is nothing schedutil specific in schedutil_cpu_util(), rename it
to effective_cpu_util(). Also create and expose another wrapper
sched_cpu_util() which can be used by other parts of the kernel, like
thermal core (that will be done in a later commit).
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/db011961fb3bb8bef1c0eda5cd64564637d3ef31.1607400596.git.viresh.kumar@linaro.org
In order to implement byte queue limits (bql) in CAN drivers, the length of the
CAN frame needs to be passed into the networking stack after queueing and after
transmission completion.
To avoid to calculate this length twice, extend can_rx_offload_get_echo_skb()
to return that value. Convert all users of this function, too.
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20210111141930.693847-15-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In order to implement byte queue limits (bql) in CAN drivers, the length of the
CAN frame needs to be passed into the networking stack after queueing and after
transmission completion.
To avoid to calculate this length twice, extend can_get_echo_skb() to return
that value. Convert all users of this function, too.
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20210111141930.693847-14-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add a frame_len argument to can_put_echo_skb() which is used to save length of
the CAN frame into field frame_len of struct can_skb_priv so that it can be
later used after transmission completion. Convert all users of this function,
too.
Drivers which implement BQL call can_put_echo_skb() with the output of
can_skb_get_frame_len(skb) and drivers which do not simply pass zero as an
input (in the same way that NULL would be given to can_get_echo_skb()). This
way, we have a nice symmetry between the two echo functions.
Link: https://lore.kernel.org/r/20210111061335.39983-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20210111141930.693847-13-mkl@pengutronix.de
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
In order to implement byte queue limits (bql) in CAN drivers, the length of the
CAN frame needs to be passed into the networking stack after queueing and after
transmission completion.
To avoid to calculate this length twice, extend the struct can_skb_priv to hold
the length of the CAN frame and extend __can_get_echo_skb() to return that
value.
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20210111141930.693847-12-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch adds the function can_skb_get_frame_len() which returns the length
of a CAN frame on the data link layer, including Start-of-frame, Identifier,
various other bits, the actual data, the CRC, the End-of-frame, the Inter frame
spacing.
Co-developed-by: Arunachalam Santhanam <arunachalam.santhanam@in.bosch.com>
Signed-off-by: Arunachalam Santhanam <arunachalam.santhanam@in.bosch.com>
Co-developed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Co-developed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20210111141930.693847-11-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The data field in CAN-FD frames have specifig frame length (0, 1, 2, 3, 4, 5,
6, 7, 8, 12, 16, 20, 24, 32, 48, 64). This function "rounds" up a given length
to the next valid CAN-FD frame length.
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20210111141930.693847-10-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
