Lift the dma_default_coherent variable from the mips architecture code
to the driver core. This allows an architecture to sdefault all device
to be DMA coherent at run time, even if the kernel is build with support
for DMA noncoherent device. By allowing device_initialize to set the
->dma_coherent field to this default the amount of arch hooks required
for this behavior can be greatly reduced.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add an ability to pass a pointer to a type with known size in arguments
of a global function. Such pointers may be used to overcome the limit on
the maximum number of arguments, avoid expensive and tricky workarounds
and to have multiple output arguments.
A referenced type may contain pointers but indirect access through them
isn't supported.
The implementation consists of two parts. If a global function has an
argument that is a pointer to a type with known size then:
1) In btf_check_func_arg_match(): check that the corresponding
register points to NULL or to a valid memory region that is large enough
to contain the expected argument's type.
2) In btf_prepare_func_args(): set the corresponding register type to
PTR_TO_MEM_OR_NULL and its size to the size of the expected type.
Only global functions are supported because allowance of pointers for
static functions might break validation. Consider the following
scenario. A static function has a pointer argument. A caller passes
pointer to its stack memory. Because the callee can change referenced
memory verifier cannot longer assume any particular slot type of the
caller's stack memory hence the slot type is changed to SLOT_MISC. If
there is an operation that relies on slot type other than SLOT_MISC then
verifier won't be able to infer safety of the operation.
When verifier sees a static function that has a pointer argument
different from PTR_TO_CTX then it skips arguments check and continues
with "inline" validation with more information available. The operation
that relies on the particular slot type now succeeds.
Because global functions were not allowed to have pointer arguments
different from PTR_TO_CTX it's not possible to break existing and valid
code.
Signed-off-by: Dmitrii Banshchikov <me@ubique.spb.ru>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210212205642.620788-4-me@ubique.spb.ru
of_device_node_put() is just a wrapper for of_node_put(). The platform
driver core is already polluted with of_node pointers and the only 'get'
already uses of_node_get() (though typically the get would happen in
of_device_alloc()).
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210211232745.1498137-3-robh@kernel.org
of_dev_get() and of_dev_put are just wrappers for get_device()/put_device()
on a platform_device. There's also already platform_device_{get,put}()
wrappers for this purpose. Let's update the few users and remove
of_dev_{get,put}().
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Cc: Gilles Muller <Gilles.Muller@inria.fr>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-usb@vger.kernel.org
Cc: cocci@systeme.lip6.fr
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210211232745.1498137-2-robh@kernel.org
Second set of patches for v5.12. Last time there was a smaller pull
request so unsurprisingly this time we have a big one. mt76 has new
hardware support and lots of new features, iwlwifi getting new
features and rtw88 got NAPI support. And the usual cleanups and fixes
all over.
Major changes:
ath10k
* support setting SAR limits via nl80211
rtw88
* support 8821 RFE type2 devices
* NAPI support
iwlwifi
* add new FW API support
* support for new So devices
* support for RF interference mitigation (RFI)
* support for PNVM (Platform Non-Volatile Memory, a firmware data
file) from BIOS
mt76
* add new mt7921e driver
* 802.11 encap offload support
* support for multiple pcie gen1 host interfaces on 7915
* 7915 testmode support
* 7915 txbf support
brcmfmac
* support for CQM RSSI notifications
wil6210
* support for extended DMG MCS 12.1 rate
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJgJl5/AAoJEG4XJFUm622bCrcIAIwarm51aHq8R0Py0ZYBEiIM
STe/x3gjxVhzYHd438APchEMnePY6pWZ6e00GnZwMyWxZpMHK+yOYzWrewLvYI29
qyPFkjGdE6PhYjL+lJjYHn4M1cdAkO4t0FSvCy5OvOnuIgu0Yz3TXXQVxZtrzrIc
2q+bOR1kKaVBe8NOjggnxTWe4mTj6efeTkD0D5M+IbppERtmpcVLra9FSgz5IcLl
hlKyNNtiNo/CmQu0bGejXR7ip+JA08f5No6TOlEQKR6pBvBvwrvgXHsq9rfQO8qA
CDhz4DqfPPYMNXnJuFVAzYsw4raZblwTg5GtIjH7e0cbXxSAx50Ne2Hd850nkO8=
=eQGJ
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-2021-02-12' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.12
Second set of patches for v5.12. Last time there was a smaller pull
request so unsurprisingly this time we have a big one. mt76 has new
hardware support and lots of new features, iwlwifi getting new
features and rtw88 got NAPI support. And the usual cleanups and fixes
all over.
Major changes:
ath10k
* support setting SAR limits via nl80211
rtw88
* support 8821 RFE type2 devices
* NAPI support
iwlwifi
* add new FW API support
* support for new So devices
* support for RF interference mitigation (RFI)
* support for PNVM (Platform Non-Volatile Memory, a firmware data
file) from BIOS
mt76
* add new mt7921e driver
* 802.11 encap offload support
* support for multiple pcie gen1 host interfaces on 7915
* 7915 testmode support
* 7915 txbf support
brcmfmac
* support for CQM RSSI notifications
wil6210
* support for extended DMG MCS 12.1 rate
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The use-case for dropping the MTU check when TC-BPF does redirect to
ingress, is described by Eyal Birger in email[0]. The summary is the
ability to increase packet size (e.g. with IPv6 headers for NAT64) and
ingress redirect packet and let normal netstack fragment packet as needed.
[0] https://lore.kernel.org/netdev/CAHsH6Gug-hsLGHQ6N0wtixdOa85LDZ3HNRHVd0opR=19Qo4W4Q@mail.gmail.com/
V15:
- missing static for function declaration
V9:
- Make net_device "up" (IFF_UP) check explicit in skb_do_redirect
V4:
- Keep net_device "up" (IFF_UP) check.
- Adjustment to handle bpf_redirect_peer() helper
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/161287790971.790810.11785274340154740591.stgit@firesoul
powerpc was the last provider of arch_remap() and the last
user of mm-arch-hooks.h.
Since commit 526a9c4a72 ("powerpc/vdso: Provide vdso_remap()"),
arch_remap() hence mm-arch-hooks.h are not used anymore.
Remove them.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Richard Weinberger <richard@nod.at>
- Make the nVHE EL2 object relocatable, resulting in much more
maintainable code
- Handle concurrent translation faults hitting the same page
in a more elegant way
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Allow the disabling of symbol export from assembly code
- Simplification of the early init hypercall handling
-----BEGIN PGP SIGNATURE-----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=6EwV
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.12
- Make the nVHE EL2 object relocatable, resulting in much more
maintainable code
- Handle concurrent translation faults hitting the same page
in a more elegant way
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Allow the disabling of symbol export from assembly code
- Simplification of the early init hypercall handling
With llist_head it is possible to avoid the locking (the irq-off region)
when items are added. This makes it possible to add items on a remote
CPU without additional locking.
llist_add() returns true if the list was previously empty. This can be
used to invoke the SMP function call / raise sofirq only if the first
item was added (otherwise it is already pending).
This simplifies the code a little and reduces the IRQ-off regions.
blk_mq_raise_softirq() needs a preempt-disable section to ensure the
request is enqueued on the same CPU as the softirq is raised.
Some callers (USB-storage) invoke this path in preemptible context.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for the TRNG firmware call introduced by Arm spec DEN0098.
* for-next/rng:
arm64: Add support for SMCCC TRNG entropy source
firmware: smccc: Introduce SMCCC TRNG framework
firmware: smccc: Add SMCCC TRNG function call IDs
There is no users outside of property.c. No need to export
acpi_node_prop_read(), hence make it static.
Fixes: 3708184afc ("device property: Move FW type specific functionality to FW specific files")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After the commit 3a7a2ab839 couple of functions became a dead code.
Moreover, for all these years nobody used them. Remove.
Fixes: 3a7a2ab839 ("ACPI / property: Extend fwnode_property_* to data-only subnodes")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge in the recent paravirt changes to resolve conflicts caused
by objtool annotations.
Conflicts:
arch/x86/xen/xen-asm.S
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The ROHM BD718x7 and BD71828 drivers support setting HW state
specific voltages from device-tree. This is used also by various
in-tree DTS files.
These drivers do incorrectly try to compose bit-map using enum
values. By a chance this works for first two valid levels having
values 1 and 2 - but setting values for the rest of the levels
do indicate capability of setting values for first levels as
well. Luckily the regulators which support setting values for
SUSPEND/LPSR do usually also support setting values for RUN
and IDLE too - thus this has not been such a fatal issue.
Fix this by defining the old enum values as bits and fixing the
parsing code. This allows keeping existing IC specific drivers
intact and only slightly changing the rohm-regulator.c
Fixes: 21b72156ed ("regulator: bd718x7: Split driver to common and bd718x7 specific parts")
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210212080023.GA880728@localhost.localdomain
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull RCU updates from Paul E. McKenney:
- Documentation updates.
- Miscellaneous fixes.
- kfree_rcu() updates: Addition of mem_dump_obj() to provide allocator return
addresses to more easily locate bugs. This has a couple of RCU-related commits,
but is mostly MM. Was pulled in with akpm's agreement.
- Per-callback-batch tracking of numbers of callbacks,
which enables better debugging information and smarter
reactions to large numbers of callbacks.
- The first round of changes to allow CPUs to be runtime switched from and to
callback-offloaded state.
- CONFIG_PREEMPT_RT-related changes.
- RCU CPU stall warning updates.
- Addition of polling grace-period APIs for SRCU.
- Torture-test and torture-test scripting updates, including a "torture everything"
script that runs rcutorture, locktorture, scftorture, rcuscale, and refscale.
Plus does an allmodconfig build.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
dev_ifsioc_locked() is called with only RCU read lock, so when
there is a parallel writer changing the mac address, it could
get a partially updated mac address, as shown below:
Thread 1 Thread 2
// eth_commit_mac_addr_change()
memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
// dev_ifsioc_locked()
memcpy(ifr->ifr_hwaddr.sa_data,
dev->dev_addr,...);
Close this race condition by guarding them with a RW semaphore,
like netdev_get_name(). We can not use seqlock here as it does not
allow blocking. The writers already take RTNL anyway, so this does
not affect the slow path. To avoid bothering existing
dev_set_mac_address() callers in drivers, introduce a new wrapper
just for user-facing callers on ioctl and rtnetlink paths.
Note, bonding also changes slave mac addresses but that requires
a separate patch due to the complexity of bonding code.
Fixes: 3710becf8a ("net: RCU locking for simple ioctl()")
Reported-by: "Gong, Sishuai" <sishuai@purdue.edu>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This needs a new helper that:
- can work in a sleepable context (using sock_gen_cookie)
- takes a struct sock pointer and checks that it's not NULL
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210210111406.785541-2-revest@chromium.org
This patch adds support to use new LMTST lines for NPA batch free
and burst SQE flush. Adds new dev_hw_ops structure to hold platform
specific functions and create new files cn10k.c and cn10k.h.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To help debugging kernel, show real address for trace event arguments
in tracefs/trace{,pipe} instead of hashed pointer value.
Since ftrace human-readable format uses vsprintf(), all %p are
translated to hash values instead of pointer address.
However, when debugging the kernel, raw address value gives a
hint when comparing with the memory mapping in the kernel.
(Those are sometimes used with crash log, which is not hashed too)
So converting %p with %px when calling trace_seq_printf().
Moreover, this is not improving the security because the tracefs
can be used only by root user and the raw address values are readable
from tracefs/percpu/cpu*/trace_pipe_raw file.
Link: https://lkml.kernel.org/r/160277370703.29307.5134475491761971203.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion
tag removal, duplicate generation and forwarding.
For HSR, insertion involves the switch adding a 6 byte HSR header after
the 14 byte Ethernet header. For PRP it adds a 6 byte trailer.
Tag removal involves automatically stripping the HSR/PRP header/trailer
in the switch. This is possible when the switch also performs auto
deduplication using the HSR/PRP header/trailer (making it no longer
required).
Forwarding involves automatically forwarding between redundant ports in
an HSR. This is crucial because delay is accumulated as a frame passes
through each node in the ring.
Duplication involves the switch automatically sending a single frame
from the CPU port to both redundant ports. This is required because the
inserted HSR/PRP header/trailer must contain the same sequence number
on the frames sent out both redundant ports.
Export is_hsr_master so DSA can tell them apart from other devices in
dsa_slave_changeupper.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
At the moment, PORT_MII is reported in the ethtool ops. This is odd
because it is an interface between the MAC and the PHY and no external
port. Some network card drivers will overwrite the port to twisted pair
or fiber, though. Even worse, the MDI/MDIX setting is only used by
ethtool if the port is twisted pair.
Set the port to PORT_TP by default because most PHY drivers are copper
ones. If there is fibre support and it is enabled, the PHY driver will
set it to PORT_FIBRE.
This will change reporting PORT_MII to either PORT_TP or PORT_FIBRE;
except for the genphy fallback driver.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following W=1 kernel build warning(s):
drivers/clk/spear/spear1310_clock.c:385:13: warning: no previous prototype for ‘spear1310_clk_init’ [-Wmissing-prototypes]
drivers/clk/spear/spear1340_clock.c:442:13: warning: no previous prototype for ‘spear1340_clk_init’ [-Wmissing-prototypes]
Cc: Viresh Kumar <vireshk@kernel.org>
Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210126124540.3320214-20-lee.jones@linaro.org
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
3 more common kmap patterns are kmap/memcpy/kunmap, kmap/memmove/kunmap.
and kmap/memset/kunmap.
Add helper functions for those patterns which use kmap_local_page().
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: David Sterba <dsterba@suse.com>
kmap_local_page() is more efficient and is well suited for these calls.
Convert the kmap() to kmap_local_page()
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Working through a conversion to a call kmap_local_page() instead of
kmap() revealed many places where the pattern kmap/memcpy/kunmap
occurred.
Eric Biggers, Matthew Wilcox, Christoph Hellwig, Dan Williams, and Al
Viro all suggested putting this code into helper functions. Al Viro
further pointed out that these functions already existed in the iov_iter
code.[1]
Various locations for the lifted functions were considered.
Headers like mm.h or string.h seem ok but don't really portray the
functionality well. pagemap.h made some sense but is for page cache
functionality.[2]
Another alternative would be to create a new header for the promoted
memcpy functions, but it masks the fact that these are designed to copy
to/from pages using the kernel direct mappings and complicates matters
with a new header.
Placing these functions in 'highmem.h' is suboptimal especially with the
changes being proposed in the functionality of kmap. From a caller
perspective including/using 'highmem.h' implies that the functions
defined in that header are only required when highmem is in use which is
increasingly not the case with modern processors. However, highmem.h is
where all the current functions like this reside (zero_user(),
clear_highpage(), clear_user_highpage(), copy_user_highpage(), and
copy_highpage()). So it makes the most sense even though it is
distasteful for some.[3]
Lift memcpy_to_page() and memcpy_from_page() to pagemap.h.
[1] https://lore.kernel.org/lkml/20201013200149.GI3576660@ZenIV.linux.org.uk/https://lore.kernel.org/lkml/20201013112544.GA5249@infradead.org/
[2] https://lore.kernel.org/lkml/20201208122316.GH7338@casper.infradead.org/
[3] https://lore.kernel.org/lkml/20201013200149.GI3576660@ZenIV.linux.org.uk/#thttps://lore.kernel.org/lkml/20201208163814.GN1563847@iweiny-DESK2.sc.intel.com/
Cc: Boris Pismenny <borisp@mellanox.com>
Cc: Or Gerlitz <gerlitz.or@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When the kernel is running at EL2, the PID is stored in CONTEXTIDR_EL2.
So, tracing CONTEXTIDR_EL1 doesn't give us the pid of the process.
Thus we should trace the VMID with VMIDOPT set to trace CONTEXTIDR_EL2
instead of CONTEXTIDR_EL1. Given that we have an existing config
option "contextid" and this will be useful for tracing virtual machines
(when we get to support virtualization).
So instead, this patch extends option CTXTID with an extra bit
ETM_OPT_CTXTID2 (bit 15), thus on an EL2 kernel, we will have another
bit available for the perf tool: ETM_OPT_CTXTID is for kernel running in
EL1, ETM_OPT_CTXTID2 is used when kernel runs in EL2 with VHE enabled.
The tool must be backward compatible for users, i.e, "contextid" today
traces PID and that should remain the same; for this purpose, the perf
tool is updated to automatically set corresponding bit for the
"contextid" config, therefore, the user doesn't have to bother which EL
the kernel is running.
i.e, perf record -e cs_etm/contextid/u --
will always do the "pid" tracing, independent of the kernel EL.
The driver parses the format "contextid", which traces CONTEXTIDR_EL1
for ETM_OPT_CTXTID (on EL1 kernel) and traces CONTEXTIDR_EL2 for
ETM_OPT_CTXTID2 (on EL2 kernel).
Besides the enhancement for format "contexid", extra two formats are
introduced: "contextid1" and "contextid2". This considers to support
tracing both CONTEXTIDR_EL1 and CONTEXTIDR_EL2 when the kernel is
running at EL2. Finally, the PMU formats are defined as follow:
"contextid1": Available on both EL1 kernel and EL2 kernel. When the
kernel is running at EL1, "contextid1" enables the PID
tracing; when the kernel is running at EL2, this enables
tracing the PID of guest applications.
"contextid2": Only usable when the kernel is running at EL2. When
selected, enables PID tracing on EL2 kernel.
"contextid": Will be an alias for the option that enables PID
tracing. I.e,
contextid == contextid1, on EL1 kernel.
contextid == contextid2, on EL2 kernel.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Al Grant <al.grant@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[ Added two config formats: contextid1, contextid2 ]
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210206150833.42120-4-leo.yan@linaro.org
Link: https://lore.kernel.org/r/20210211172038.2483517-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In theory, the options should be arbitrary values and are neutral for
any ETM version; so far perf tool uses ETMv3.5/PTM ETMCR config bits
except for register's bit definitions, also uses as options.
This can introduce confusion, especially if we want to add a new option
but the new option is not supported by ETMv3.5/PTM ETMCR. But on the
other hand, we cannot change options since these options are generic
CoreSight PMU ABI.
For easier maintenance and avoid confusion, this patch refines the
comment to clarify perf options, and gives out the background info for
these bits are coming from ETMv3.5/PTM. Afterwards, we should take
these options as general knobs, and if there have any confliction with
ETMv3.5/PTM, should consider to define saperate macros for ETMv3.5/PTM
ETMCR config bits.
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210206150833.42120-2-leo.yan@linaro.org
Link: https://lore.kernel.org/r/20210211172038.2483517-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
spi_mem_default_supports_op() rejects DTR ops by default to ensure that
the controller drivers that haven't been updated with DTR support
continue to reject them. It also makes sure that controllers that don't
support DTR mode at all (which is most of them at the moment) also
reject them.
This means that controller drivers that want to support DTR mode can't
use spi_mem_default_supports_op(). Driver authors have to roll their own
supports_op() function and mimic the buswidth checks. See
spi-cadence-quadspi.c for example. Or even worse, driver authors might
skip it completely or get it wrong.
Add spi_mem_dtr_supports_op(). It provides a basic sanity check for DTR
ops and performs the buswidth requirement check. Move the logic for
checking buswidth in spi_mem_default_supports_op() to a separate
function so the logic is not repeated twice.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20210204141218.32229-1-p.yadav@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add per-program counter for number of times recursion prevention mechanism
was triggered and expose it via show_fdinfo and bpf_prog_info.
Teach bpftool to print it.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210210033634.62081-7-alexei.starovoitov@gmail.com
Since both sleepable and non-sleepable programs execute under migrate_disable
add recursion prevention mechanism to both types of programs when they're
executed via bpf trampoline.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210210033634.62081-5-alexei.starovoitov@gmail.com
Since sleepable programs don't migrate from the cpu the excution stats can be
computed for them as well. Reuse the same infrastructure for both sleepable and
non-sleepable programs.
run_cnt -> the number of times the program was executed.
run_time_ns -> the program execution time in nanoseconds including the
off-cpu time when the program was sleeping.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20210210033634.62081-4-alexei.starovoitov@gmail.com
Move bpf_prog_stats from prog->aux into prog to avoid one extra load
in critical path of program execution.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210210033634.62081-2-alexei.starovoitov@gmail.com
The system would deadlock when swapping to a dm-crypt device. The reason
is that for each incoming write bio, dm-crypt allocates memory that holds
encrypted data. These excessive allocations exhaust all the memory and the
result is either deadlock or OOM trigger.
This patch limits the number of in-flight swap bios, so that the memory
consumed by dm-crypt is limited. The limit is enforced if the target set
the "limit_swap_bios" variable and if the bio has REQ_SWAP set.
Non-swap bios are not affected becuase taking the semaphore would cause
performance degradation.
This is similar to request-based drivers - they will also block when the
number of requests is over the limit.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Allow removal of CONFIG_BLK_DEV_ZONED conditionals in target_type
definition of various targets.
Suggested-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Update the device-mapper core to support exposing the inline crypto
support of the underlying device(s) through the device-mapper device.
This works by creating a "passthrough keyslot manager" for the dm
device, which declares support for encryption settings which all
underlying devices support. When a supported setting is used, the bio
cloning code handles cloning the crypto context to the bios for all the
underlying devices. When an unsupported setting is used, the blk-crypto
fallback is used as usual.
Crypto support on each underlying device is ignored unless the
corresponding dm target opts into exposing it. This is needed because
for inline crypto to semantically operate on the original bio, the data
must not be transformed by the dm target. Thus, targets like dm-linear
can expose crypto support of the underlying device, but targets like
dm-crypt can't. (dm-crypt could use inline crypto itself, though.)
A DM device's table can only be changed if the "new" inline encryption
capabilities are a (*not* necessarily strict) superset of the "old" inline
encryption capabilities. Attempts to make changes to the table that result
in some inline encryption capability becoming no longer supported will be
rejected.
For the sake of clarity, key eviction from underlying devices will be
handled in a future patch.
Co-developed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Introduce blk_ksm_update_capabilities() to update the capabilities of
a keyslot manager (ksm) in-place. The pointer to a ksm in a device's
request queue may not be easily replaced, because upper layers like
the filesystem might access it (e.g. for programming keys/checking
capabilities) at the same time the device wants to replace that
request queue's ksm (and free the old ksm's memory). This function
allows the device to update the capabilities of the ksm in its request
queue directly. Devices can safely update the ksm this way without any
synchronization with upper layers *only* if the updated (new) ksm
continues to support all the crypto capabilities that the old ksm did
(see description below for blk_ksm_is_superset() for why this is so).
Also introduce blk_ksm_is_superset() which checks whether one ksm's
capabilities are a (not necessarily strict) superset of another ksm's.
The blk-crypto framework requires that crypto capabilities that were
advertised when a bio was created continue to be supported by the
device until that bio is ended - in practice this probably means that
a device's advertised crypto capabilities can *never* "shrink" (since
there's no synchronization between bio creation and when a device may
want to change its advertised capabilities) - so a previously
advertised crypto capability must always continue to be supported.
This function can be used to check that a new ksm is a valid
replacement for an old ksm.
Signed-off-by: Satya Tangirala <satyat@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The device mapper may map over devices that have inline encryption
capabilities, and to make use of those capabilities, the DM device must
itself advertise those inline encryption capabilities. One way to do this
would be to have the DM device set up a keyslot manager with a
"sufficiently large" number of keyslots, but that would use a lot of
memory. Also, the DM device itself has no "keyslots", and it doesn't make
much sense to talk about "programming a key into a DM device's keyslot
manager", so all that extra memory used to represent those keyslots is just
wasted. All a DM device really needs to be able to do is advertise the
crypto capabilities of the underlying devices in a coherent manner and
expose a way to evict keys from the underlying devices.
There are also devices with inline encryption hardware that do not
have a limited number of keyslots. One can send a raw encryption key along
with a bio to these devices (as opposed to typical inline encryption
hardware that require users to first program a raw encryption key into a
keyslot, and send the index of that keyslot along with the bio). These
devices also only need the same things from the keyslot manager that DM
devices need - a way to advertise crypto capabilities and potentially a way
to expose a function to evict keys from hardware.
So we introduce a "passthrough" keyslot manager that provides a way to
represent a keyslot manager that doesn't have just a limited number of
keyslots, and for which do not require keys to be programmed into keyslots.
DM devices can set up a passthrough keyslot manager in their request
queues, and advertise appropriate crypto capabilities based on those of the
underlying devices. Blk-crypto does not attempt to program keys into any
keyslots in the passthrough keyslot manager. Instead, if/when the bio is
resubmitted to the underlying device, blk-crypto will try to program the
key into the underlying device's keyslot manager.
Signed-off-by: Satya Tangirala <satyat@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
By default the PCA9450 doesn't handle the assertion of the WDOG_B
signal, but this is required to guarantee that things like software
resets triggered by the watchdog work reliably.
As we don't want to rely on the bootloader to enable this, we tell
the PMIC to issue a cold reset in case the WDOG_B signal is
asserted (WDOG_B_CFG = 10), just as the NXP U-Boot code does.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20210211105534.38972-3-frieder.schrempf@kontron.de
Signed-off-by: Mark Brown <broonie@kernel.org>
To the very best of my knowledge there has never been any in-tree
code that calls this function. It exists largely to support an
out-of-tree driver that provides kgdb-over-ethernet using the
netpoll API.
kgdboe has been out-of-tree for more than 10 years and I don't
recall any serious attempt to upstream it at any point in the last
five. At this stage it looks better to stop carrying this code in
the kernel and integrate the code into the out-of-tree driver
instead.
The long term trajectory for the kernel looks likely to include
effort to remove or reduce the use of tasklets (something that has
also been true for the last 10 years). Thus the main real reason
for this patch is to make explicit that the in-tree kgdb features
do not require tasklets.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20210210142525.2876648-1-daniel.thompson@linaro.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Jason Wessel <jason.wessel@windriver.com>
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of a flexible-array member in
struct icmsg_negotiate, instead of a one-element array.
Also, this helps the ongoing efforts to enable -Warray-bounds and fix the
following warnings:
drivers/hv/channel_mgmt.c:315:23: warning: array subscript 1 is above array bounds of ‘struct ic_version[1]’ [-Warray-bounds]
drivers/hv/channel_mgmt.c:316:23: warning: array subscript 1 is above array bounds of ‘struct ic_version[1]’ [-Warray-bounds]
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210201174334.GA171933@embeddedor
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Only the VSCs or ICs that have been hardened and that are critical for
the successful adoption of Confidential VMs should be allowed if the
guest is running isolated. This change reduces the footprint of the
code that will be exercised by Confidential VMs and hence the exposure
to bugs and vulnerabilities.
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210201144814.2701-3-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
When commit 1852ebd135 ("of: irq: make a stub for of_irq_parse_one()")
added a stub for of_irq_parse_one() it set the return value to 0. Return
value of 0 in this instance means the call succeeded and the out_irq
pointer was filled with valid data. So, fix it to return an error value.
Fixes: 1852ebd135 ("of: irq: make a stub for of_irq_parse_one()")
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210210200050.4106032-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Device list is not stored in mlx5_priv anymore, so delete it as it's not
used.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
