* for-next/perf: (25 commits)
perf/marvell: Fix !CONFIG_OF build for CN10K DDR PMU driver
drivers/perf: Add Apple icestorm/firestorm CPU PMU driver
drivers/perf: arm_pmu: Handle 47 bit counters
arm64: perf: Consistently make all event numbers as 16-bits
arm64: perf: Expose some Armv9 common events under sysfs
perf/marvell: cn10k DDR perf event core ownership
perf/marvell: cn10k DDR perfmon event overflow handling
perf/marvell: CN10k DDR performance monitor support
dt-bindings: perf: marvell: cn10k ddr performance monitor
perf/arm-cmn: Update watchpoint format
perf/arm-cmn: Hide XP PUB events for CMN-600
perf: replace bitmap_weight with bitmap_empty where appropriate
perf: Replace acpi_bus_get_device()
perf/marvell_cn10k: Fix unused variable warning when W=1 and CONFIG_OF=n
perf/arm-cmn: Make arm_cmn_debugfs static
perf: MARVELL_CN10K_TAD_PMU should depend on ARCH_THUNDER
perf/arm-ccn: Use platform_get_irq() to get the interrupt
irqchip/apple-aic: Move PMU-specific registers to their own include file
arm64: dts: apple: Add t8303 PMU nodes
arm64: dts: apple: Add t8103 PMU interrupt affinities
...
* for-next/pauth:
arm64: Add support of PAuth QARMA3 architected algorithm
arm64: cpufeature: Mark existing PAuth architected algorithm as QARMA5
arm64: cpufeature: Account min_field_value when cheking secondaries for PAuth
* for-next/mte:
docs: sysfs-devices-system-cpu: document "asymm" value for mte_tcf_preferred
arm64/mte: Remove asymmetric mode from the prctl() interface
kasan: fix a missing header include of static_keys.h
arm64/mte: Add userspace interface for enabling asymmetric mode
arm64/mte: Add hwcap for asymmetric mode
arm64/mte: Add a little bit of documentation for mte_update_sctlr_user()
arm64/mte: Document ABI for asymmetric mode
arm64: mte: avoid clearing PSTATE.TCO on entry unless necessary
kasan: split kasan_*enabled() functions into a separate header
* for-next/misc:
arm64: mm: Drop 'const' from conditional arm64_dma_phys_limit definition
arm64: clean up tools Makefile
arm64: drop unused includes of <linux/personality.h>
arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zones
arm64: prevent instrumentation of bp hardening callbacks
arm64: cpufeature: Remove cpu_has_fwb() check
arm64: atomics: remove redundant static branch
arm64: entry: Save some nops when CONFIG_ARM64_PSEUDO_NMI is not set
* for-next/linkage:
arm64: module: remove (NOLOAD) from linker script
linkage: remove SYM_FUNC_{START,END}_ALIAS()
x86: clean up symbol aliasing
arm64: clean up symbol aliasing
linkage: add SYM_FUNC_ALIAS{,_LOCAL,_WEAK}()
* for-next/kselftest:
kselftest/arm64: Log the PIDs of the parent and child in sve-ptrace
kselftest/arm64: signal: Allow tests to be incompatible with features
kselftest/arm64: mte: user_mem: test a wider range of values
kselftest/arm64: mte: user_mem: add more test types
kselftest/arm64: mte: user_mem: add test type enum
kselftest/arm64: mte: user_mem: check different offsets and sizes
kselftest/arm64: mte: user_mem: rework error handling
kselftest/arm64: mte: user_mem: introduce tag_offset and tag_len
kselftest/arm64: Remove local definitions of MTE prctls
kselftest/arm64: Remove local ARRAY_SIZE() definitions
* for-next/coredump:
arm64: Change elfcore for_each_mte_vma() to use VMA iterator
arm64: mte: Document the core dump file format
arm64: mte: Dump the MTE tags in the core file
arm64: mte: Define the number of bytes for storing the tags in a page
elf: Introduce the ARM MTE ELF segment type
elfcore: Replace CONFIG_{IA64, UML} checks with a new option
It was added in commit 766121ba5d ("arm64/mte: Add userspace interface
for enabling asymmetric mode").
Signed-off-by: Evgenii Stepanov <eugenis@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220309215943.87831-1-eugenis@google.com
Signed-off-by: Will Deacon <will@kernel.org>
As pointed out by Evgenii Stepanov one potential issue with the new ABI for
enabling asymmetric is that if there are multiple places where MTE is
configured in a process, some of which were compiled with the old prctl.h
and some of which were compiled with the new prctl.h, there may be problems
keeping track of which MTE modes are requested. For example some code may
disable only sync and async modes leaving asymmetric mode enabled when it
intended to fully disable MTE.
In order to avoid such mishaps remove asymmetric mode from the prctl(),
instead implicitly allowing it if both sync and async modes are requested.
This should not disrupt userspace since a process requesting both may
already see a mix of sync and async modes due to differing defaults between
CPUs or changes in default while the process is running but it does mean
that userspace is unable to explicitly request asymmetric mode without
changing the system default for CPUs.
Reported-by: Evgenii Stepanov <eugenis@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Branislav Rankov <branislav.rankov@arm.com>
Link: https://lore.kernel.org/r/20220309131200.112637-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Qian Cai reported that playing with CPU hotplug resulted in a
out-of-bound access due to cavium_erratum_23154_cpus missing
a sentinel indicating the end of the array.
Add it in order to restore peace and harmony in the world
of broken HW.
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: 24a147bcef ("irqchip/gic-v3: Workaround Marvell erratum 38545 when reading IAR")
Link: https://lore.kernel.org/r/YijmkXp1VG7e8lDx@qian
Cc: Linu Cherian <lcherian@marvell.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220309180600.3990874-1-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
When compiling the Marvell CN10K DDR PMU driver with CONFIG_OF=n, the
build fails:
| drivers/perf/marvell_cn10k_ddr_pmu.c:723:35: error: 'cn10k_ddr_pmu_of_match' undeclared here (not in a function); did you mean 'cn10k_ddr_pmu_driver'?
Use `of_match_ptr()` to avoid referencing the non-existent match table
in this configuration.
Link: https://lore.kernel.org/r/202203091424.Vfe8J4W9-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Will Deacon <will@kernel.org>
Commit 031495635b ("arm64: Do not defer reserve_crashkernel() for
platforms with no DMA memory zones") introduced different definitions
for 'arm64_dma_phys_limit' depending on CONFIG_ZONE_DMA{,32} based on
a late suggestion from Pasha. Sadly, this results in a build error when
passing W=1:
| arch/arm64/mm/init.c:90:19: error: conflicting type qualifiers for 'arm64_dma_phys_limit'
Drop the 'const' for now and use '__ro_after_init' consistently.
Link: https://lore.kernel.org/r/202203090241.aj7paWeX-lkp@intel.com
Link: https://lore.kernel.org/r/CA+CK2bDbbx=8R=UthkMesWOST8eJMtOGJdfMRTFSwVmo0Vn0EA@mail.gmail.com
Fixes: 031495635b ("arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zones")
Signed-off-by: Will Deacon <will@kernel.org>
Since commit 2369f171d5 ("arm64: crash_core: Export MODULES, VMALLOC,
and VMEMMAP ranges"), Stephen reports a warning when building htmldocs:
| Documentation/admin-guide/kdump/vmcoreinfo.rst:498: WARNING: Title underline too short.
Extend the underline to squash the warning.
Fixes: 2369f171d5 ("arm64: crash_core: Export MODULES, VMALLOC, and VMEMMAP ranges")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Will Deacon <will@kernel.org>
The kasan-enabled.h header relies on static keys, so make sure
to include the header to avoid compilation errors (with JUMP_LABEL=n).
It fixes the following:
./include/linux/kasan-enabled.h:9:1: warning: data definition has no type or storage class
9 | DECLARE_STATIC_KEY_FALSE(kasan_flag_enabled);
| ^~~~~~~~~~~~~~~~~~~~~~~~
error: type defaults to 'int' in declaration of 'DECLARE_STATIC_KEY_FALSE' [-Werror=implicit-int]
Fixes: f9b5e46f40 ("kasan: split kasan_*enabled() functions into a separate header")
Cc: Peter Collingbourne <pcc@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20220301154518.19456-1-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Support for the CPU PMUs on the Apple M1.
* for-next/perf-m1:
drivers/perf: Add Apple icestorm/firestorm CPU PMU driver
drivers/perf: arm_pmu: Handle 47 bit counters
irqchip/apple-aic: Move PMU-specific registers to their own include file
arm64: dts: apple: Add t8303 PMU nodes
arm64: dts: apple: Add t8103 PMU interrupt affinities
irqchip/apple-aic: Wire PMU interrupts
irqchip/apple-aic: Parse FIQ affinities from device-tree
dt-bindings: apple,aic: Add affinity description for per-cpu pseudo-interrupts
dt-bindings: apple,aic: Add CPU PMU per-cpu pseudo-interrupts
dt-bindings: arm-pmu: Document Apple PMU compatible strings
Add a new, weird and wonderful driver for the equally weird Apple
PMU HW. Although the PMU itself is functional, we don't know much
about the events yet, so this can be considered as yet another
random number generator...
Nonetheless, it can reliably count at least cycles and instructions
in the usually wonky big-little way. For anything else, it of course
supports raw event numbers.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
The current ARM PMU framework can only deal with 32 or 64bit counters.
Teach it about a 47bit flavour.
Yes, this is odd.
Reviewed-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Pull in Apple AIC rework from Marc Zyngier to support PMU interrupts on
the M1 platform.
* 'irq/aic-pmu' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms:
irqchip/apple-aic: Move PMU-specific registers to their own include file
arm64: dts: apple: Add t8303 PMU nodes
arm64: dts: apple: Add t8103 PMU interrupt affinities
irqchip/apple-aic: Wire PMU interrupts
irqchip/apple-aic: Parse FIQ affinities from device-tree
dt-bindings: apple,aic: Add affinity description for per-cpu pseudo-interrupts
dt-bindings: apple,aic: Add CPU PMU per-cpu pseudo-interrupts
dt-bindings: arm-pmu: Document Apple PMU compatible strings
Arm ARM documents PMU event numbers as 16-bits in the table and more 0x4XXX
events have been added in the header file, so use 16-bits for all event
numbers and make them consistent.
No functional change intended.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/20220303100710.2238-1-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
Armv9[1] has introduced some common architectural events (0x400C-0x400F)
and common microarchitectural events (0x4010-0x401B), which can be detected
by PMCEID0_EL0 from bit44 to bit59, so expose these common events under
sysfs.
[1] https://developer.arm.com/documentation/ddi0608/ba
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/20220303085419.64085-1-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
As DDR perf event counters are not per core, so they should be accessed
only by one core at a time. Select new core when previously owning core
is going offline.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Reviewed-by: Bhaskara Budiredla <bbudiredla@marvell.com>
Link: https://lore.kernel.org/r/20220211045346.17894-5-bbhushan2@marvell.com
Signed-off-by: Will Deacon <will@kernel.org>
CN10k DSS h/w perfmon does not support event overflow interrupt, so
periodic timer is being used. Each event counter is 48bit, which in worst
case scenario can increment at maximum 5.6 GT/s. At this rate it may take
many hours to overflow these counters. Therefore polling period for
overflow is set to 100 sec, which can be changed using sysfs parameter.
Two fixed event counters starts counting from zero on overflow, so
overflow condition is when new count less than previous count. While
eight programmable event counters freezes at maximum value. Also individual
counter cannot be restarted, so need to restart all eight counters.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Reviewed-by: Bhaskara Budiredla <bbudiredla@marvell.com>
Link: https://lore.kernel.org/r/20220211045346.17894-4-bbhushan2@marvell.com
Signed-off-by: Will Deacon <will@kernel.org>
Marvell CN10k DRAM Subsystem (DSS) supports eight event counters for
monitoring performance and software can program each counter to monitor
any of the defined performance event. Performance events are for
interface between the DDR controller and the PHY, interface between the
DDR Controller and the CHI interconnect, or within the DDR Controller.
Additionally DSS also supports two fixed performance event counters, one
for number of ddr reads and other for ddr writes.
This patch add basic support for these performance monitoring events
on CN10k.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Reviewed-by: Bhaskara Budiredla <bbudiredla@marvell.com>
Link: https://lore.kernel.org/r/20220211045346.17894-3-bbhushan2@marvell.com
Signed-off-by: Will Deacon <will@kernel.org>
Add binding documentation for the Marvell CN10k DDR
performance monitor unit.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220211045346.17894-2-bbhushan2@marvell.com
Signed-off-by: Will Deacon <will@kernel.org>
Remove unused gen-y.
Remove redundant $(shell ...) because 'mkdir' is done in cmd_gen_cpucaps.
Replace $(filter-out $(PHONY), $^) with the $(real-prereqs) shorthand.
The '&&' in cmd_gen_cpucaps should be replaced with ';' because it is
run under 'set -e' environment.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20220227085232.206529-1-masahiroy@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
From CMN-650 onwards, some of the fields in the watchpoint config
registers moved subtly enough to easily overlook. Watchpoint events are
still only partially supported on newer IPs - which in itself deserves
noting - but were not intended to become any *less* functional than on
CMN-600.
Fixes: 60d1504070 ("perf/arm-cmn: Support new IP features")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/e1ce4c2f1e4f73ab1c60c3a85e4037cd62dd6352.1645727871.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Drop several includes of <linux/personality.h> which are not used.
git-blame indicates they were used at some point, but they're not needed
anymore.
Signed-off-by: Sagar Patel <sagarmp@cs.unc.edu>
Link: https://lore.kernel.org/r/20220307222412.146506-1-sagarmp@cs.unc.edu
Signed-off-by: Will Deacon <will@kernel.org>
The following patches resulted in deferring crash kernel reservation to
mem_init(), mainly aimed at platforms with DMA memory zones (no IOMMU),
in particular Raspberry Pi 4.
commit 1a8e1cef76 ("arm64: use both ZONE_DMA and ZONE_DMA32")
commit 8424ecdde7 ("arm64: mm: Set ZONE_DMA size based on devicetree's dma-ranges")
commit 0a30c53573 ("arm64: mm: Move reserve_crashkernel() into mem_init()")
commit 2687275a58 ("arm64: Force NO_BLOCK_MAPPINGS if crashkernel reservation is required")
Above changes introduced boot slowdown due to linear map creation for
all the memory banks with NO_BLOCK_MAPPINGS, see discussion[1]. The proposed
changes restore crash kernel reservation to earlier behavior thus avoids
slow boot, particularly for platforms with IOMMU (no DMA memory zones).
Tested changes to confirm no ~150ms boot slowdown on our SoC with IOMMU
and 8GB memory. Also tested with ZONE_DMA and/or ZONE_DMA32 configs to confirm
no regression to deferring scheme of crash kernel memory reservation.
In both cases successfully collected kernel crash dump.
[1] https://lore.kernel.org/all/9436d033-579b-55fa-9b00-6f4b661c2dd7@linux.microsoft.com/
Signed-off-by: Vijay Balakrishna <vijayb@linux.microsoft.com>
Cc: stable@vger.kernel.org
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/r/1646242689-20744-1-git-send-email-vijayb@linux.microsoft.com
[will: Add #ifdef CONFIG_KEXEC_CORE guards to fix 'crashk_res' references in allnoconfig build]
Signed-off-by: Will Deacon <will@kernel.org>
If the test triggers a problem it may well result in a log message from
the kernel such as a WARN() or BUG(). If these include a PID it can help
with debugging to know if it was the parent or child process that triggered
the issue, since the test is just creating a new thread the process name
will be the same either way. Print the PIDs of the parent and child on
startup so users have this information to hand should it be needed.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220303192817.2732509-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
When a IAR register read races with a GIC interrupt RELEASE event,
GIC-CPU interface could wrongly return a valid INTID to the CPU
for an interrupt that is already released(non activated) instead of 0x3ff.
As a side effect, an interrupt handler could run twice, once with
interrupt priority and then with idle priority.
As a workaround, gic_read_iar is updated so that it will return a
valid interrupt ID only if there is a change in the active priority list
after the IAR read on all the affected Silicons.
Since there are silicon variants where both 23154 and 38545 are applicable,
workaround for erratum 23154 has been extended to address both of them.
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220307143014.22758-1-lcherian@marvell.com
Signed-off-by: Will Deacon <will@kernel.org>
pud_sect_supported() already checks for PUD level block mapping support i.e
on ARM64_4K_PAGES config. Hence pud_sect_supported(), along with some other
required alignment checks can help completely drop use_1G_block().
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/1644988012-25455-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
When a contiguous HugeTLB page is mapped, set_pte_at() will be called
CONT_PTES/CONT_PMDS times. Therefore, __sync_icache_dcache() will
flush cache multiple times if the page is executable (to ensure
the I-D cache coherency). However, the first flushing cache already
covers subsequent cache flush operations. So only flusing cache
for the head page if it is a HugeTLB page to avoid redundant cache
flushing. In the next patch, it is also depends on this change
since the tail vmemmap pages of HugeTLB is mapped with read-only
meanning only head page struct can be modified.
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220302084624.33340-1-songmuchun@bytedance.com
Signed-off-by: Will Deacon <will@kernel.org>
We may call arm64_apply_bp_hardening() early during entry (e.g. in
el0_ia()) before it is safe to run instrumented code. Unfortunately this
may result in running instrumented code in two cases:
* The hardening callbacks called by arm64_apply_bp_hardening() are not
marked as `noinstr`, and have been observed to be instrumented when
compiled with either GCC or LLVM.
* Since arm64_apply_bp_hardening() itself is only marked as `inline`
rather than `__always_inline`, it is possible that the compiler
decides to place it out-of-line, whereupon it may be instrumented.
For example, with defconfig built with clang 13.0.0,
call_hvc_arch_workaround_1() is compiled as:
| <call_hvc_arch_workaround_1>:
| d503233f paciasp
| f81f0ffe str x30, [sp, #-16]!
| 320183e0 mov w0, #0x80008000
| d503201f nop
| d4000002 hvc #0x0
| f84107fe ldr x30, [sp], #16
| d50323bf autiasp
| d65f03c0 ret
... but when CONFIG_FTRACE=y and CONFIG_KCOV=y this is compiled as:
| <call_hvc_arch_workaround_1>:
| d503245f bti c
| d503201f nop
| d503201f nop
| d503233f paciasp
| a9bf7bfd stp x29, x30, [sp, #-16]!
| 910003fd mov x29, sp
| 94000000 bl 0 <__sanitizer_cov_trace_pc>
| 320183e0 mov w0, #0x80008000
| d503201f nop
| d4000002 hvc #0x0
| a8c17bfd ldp x29, x30, [sp], #16
| d50323bf autiasp
| d65f03c0 ret
... with a patchable function entry registered with ftrace, and a direct
call to __sanitizer_cov_trace_pc(). Neither of these are safe early
during entry sequences.
This patch avoids the unsafe instrumentation by marking
arm64_apply_bp_hardening() as `__always_inline` and by marking the
hardening functions as `noinstr`. This avoids the potential for
instrumentation, and causes clang to consistently generate the function
as with the defconfig sample.
Note: in the defconfig compilation, when CONFIG_SVE=y, x30 is spilled to
the stack without being placed in a frame record, which will result in a
missing entry if call_hvc_arch_workaround_1() is backtraced. Similar is
true of qcom_link_stack_sanitisation(), where inline asm spills the LR
to a GPR prior to corrupting it. This is not a significant issue
presently as we will only backtrace here if an exception is taken, and
in such cases we may omit entries for other reasons today.
The relevant hardening functions were introduced in commits:
ec82b567a7 ("arm64: Implement branch predictor hardening for Falkor")
b092201e00 ("arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support")
... and these were subsequently moved in commit:
d4647f0a2a ("arm64: Rewrite Spectre-v2 mitigation code")
The arm64_apply_bp_hardening() function was introduced in commit:
0f15adbb28 ("arm64: Add skeleton to harden the branch predictor against aliasing attacks")
... and was subsequently moved and reworked in commit:
6279017e80 ("KVM: arm64: Move BP hardening helpers into spectre.h")
Fixes: ec82b567a7 ("arm64: Implement branch predictor hardening for Falkor")
Fixes: b092201e00 ("arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support")
Fixes: d4647f0a2a ("arm64: Rewrite Spectre-v2 mitigation code")
Fixes: 0f15adbb28 ("arm64: Add skeleton to harden the branch predictor against aliasing attacks")
Fixes: 6279017e80 ("KVM: arm64: Move BP hardening helpers into spectre.h")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220224181028.512873-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The following interrelated ranges are needed by the kdump crash tool:
MODULES_VADDR ~ MODULES_END,
VMALLOC_START ~ VMALLOC_END,
VMEMMAP_START ~ VMEMMAP_END
Since these values change from time to time, it is preferable to export
them via vmcoreinfo than to change the crash's code frequently.
Signed-off-by: Huang Shijie <shijie@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20220209092642.9181-1-shijie@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
The architecture provides an asymmetric mode for MTE where tag mismatches
are checked asynchronously for stores but synchronously for loads. Allow
userspace processes to select this and make it available as a default mode
via the existing per-CPU sysfs interface.
Since there PR_MTE_TCF_ values are a bitmask (allowing the kernel to choose
between the multiple modes) and there are no free bits adjacent to the
existing PR_MTE_TCF_ bits the set of bits used to specify the mode becomes
disjoint. Programs using the new interface should be aware of this and
programs that do not use it will not see any change in behaviour.
When userspace requests two possible modes but the system default for the
CPU is the third mode (eg, default is synchronous but userspace requests
either asynchronous or asymmetric) the preference order is:
ASYMM > ASYNC > SYNC
This situation is not currently possible since there are only two modes and
it is mandatory to have a system default so there could be no ambiguity and
there is no ABI change. The chosen order is basically arbitrary as we do not
have a clear metric for what is better here.
If userspace requests specifically asymmetric mode via the prctl() and the
system does not support it then we will return an error, this mirrors
how we handle the case where userspace enables MTE on a system that does
not support MTE at all and the behaviour that will be seen if running on
an older kernel that does not support userspace use of asymmetric mode.
Attempts to set asymmetric mode as the default mode will result in an error
if the system does not support it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Tested-by: Branislav Rankov <branislav.rankov@arm.com>
Link: https://lore.kernel.org/r/20220216173224.2342152-5-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Allow userspace to detect support for asymmetric mode by providing a hwcap
for it, using the official feature name FEAT_MTE3.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Tested-by: Branislav Rankov <branislav.rankov@arm.com>
Link: https://lore.kernel.org/r/20220216173224.2342152-4-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The code isn't that obscure but it probably won't hurt to have a little
bit more documentation for anyone trying to find out where everything
actually takes effect.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Tested-by: Branislav Rankov <branislav.rankov@arm.com>
Link: https://lore.kernel.org/r/20220216173224.2342152-3-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
MTE3 adds a new mode which is synchronous for reads but asynchronous for
writes. Document the userspace ABI for this feature, we call the new
mode ASYMM and add a new prctl flag and mte_tcf_preferred value for it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220216173224.2342152-2-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Some features may invalidate some tests, for example by supporting an
operation which would trap otherwise. Allow tests to list features that
they are incompatible with so we can cover the case where a signal will
be generated without disruption on systems where that won't happen.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220207152109.197566-6-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
On ELF, (NOLOAD) sets the section type to SHT_NOBITS[1]. It is conceptually
inappropriate for .plt and .text.* sections which are always
SHT_PROGBITS.
In GNU ld, if PLT entries are needed, .plt will be SHT_PROGBITS anyway
and (NOLOAD) will be essentially ignored. In ld.lld, since
https://reviews.llvm.org/D118840 ("[ELF] Support (TYPE=<value>) to
customize the output section type"), ld.lld will report a `section type
mismatch` error. Just remove (NOLOAD) to fix the error.
[1] https://lld.llvm.org/ELF/linker_script.html As of today, "The
section should be marked as not loadable" on
https://sourceware.org/binutils/docs/ld/Output-Section-Type.html is
outdated for ELF.
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Fangrui Song <maskray@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220218081209.354383-1-maskray@google.com
Signed-off-by: Will Deacon <will@kernel.org>
cpu_has_fwb() is supposed to warn user is following architectural
requirement is not valid:
LoUU, bits [29:27] - Level of Unification Uniprocessor for the cache
hierarchy.
Note
When FEAT_S2FWB is implemented, the architecture requires that
this field is zero so that no levels of data cache need to be
cleaned in order to manage coherency with instruction fetches.
LoUIS, bits [23:21] - Level of Unification Inner Shareable for the
cache hierarchy.
Note
When FEAT_S2FWB is implemented, the architecture requires that
this field is zero so that no levels of data cache need to be
cleaned in order to manage coherency with instruction fetches.
It is not really clear what user have to do if assertion fires. Having
assertions about the CPU design like this inspire even more assertions
to be added and the kernel definitely is not the right place for that,
so let's remove cpu_has_fwb() altogether.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Link: https://lore.kernel.org/r/20220224164739.119168-1-vladimir.murzin@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
QARMA3 is relaxed version of the QARMA5 algorithm which expected to
reduce the latency of calculation while still delivering a suitable
level of security.
Support for QARMA3 can be discovered via ID_AA64ISAR2_EL1
APA3, bits [15:12] Indicates whether the QARMA3 algorithm is
implemented in the PE for address
authentication in AArch64 state.
GPA3, bits [11:8] Indicates whether the QARMA3 algorithm is
implemented in the PE for generic code
authentication in AArch64 state.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220224124952.119612-4-vladimir.murzin@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In preparation of supporting PAuth QARMA3 architected algorithm mark
existing one as QARMA5, so we can distingwish between two.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220224124952.119612-3-vladimir.murzin@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In case, both boot_val and sec_val have value below min_field_value we
would wrongly report that address authentication is supported. It is
not a big issue because we enable address authentication based on boot
cpu (and check there is correct).
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220224124952.119612-2-vladimir.murzin@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Rework for_each_mte_vma() to use a VMA iterator instead of an explicit
linked-list. This will allow easy integration with the maple tree work
which removes the VMA list altogether.
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220218023650.672072-1-Liam.Howlett@oracle.com
[will: Folded in fix from Catalin]
Link: https://lore.kernel.org/r/YhUcywqIhmHvX6dG@arm.com
Signed-off--by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
