Commit graph

1058088 commits

Author SHA1 Message Date
Mauro Carvalho Chehab
b2598d9fa6 media: atomisp: add a default case at __get_frame_info()
The switch() logic there misses a break and a default case.
That makes it more prone to problems as the code change.

Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:44 +00:00
Niklas Söderlund
5814f32fef media: staging: max96712: Add basic support for MAX96712 GMSL2 deserializer
Add basic support for Maxim MAX96712 quad GMSL2 deserializers. The
driver is capable of powering on the device and configuring the MIPI
CSI-2 bus in a DPHY 4-lane configuration as well as operating the
internal VTG (Video Timing Generator) and VPG (Video Pattern Generator).

Using these features the driver is able to act as a 1080p @ 30 fps V4L2
video source. Producing either a checkerboard or gradient pattern on the
CSI-2 bus, selectable thru a V4L2 control.

While the driver is useful as-is and have been used to prove the correct
operation of the MAX96712 itself and "downstream" devices using the
MAX96712 as a video source there are a lot of features missing. Most
notably the ability to operate the GMSL bus.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:43 +00:00
Mauro Carvalho Chehab
819d679b58 media: atomisp: comment-out JPEG format
This is already disabled on some parts of the code, and trying
to use it with current firmware causes an error:

[   53.799946] atomisp-isp2 0000:00:03.0: can't create streams
[   53.799962] atomisp-isp2 0000:00:03.0: __get_frame_info 1600x900 (padded to 0) returned -22

So, completely disable reporting it.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:43 +00:00
Mauro Carvalho Chehab
03723b9248 media: atomisp: report the visible resolution
The atomisp sensors and logic adds an extra pad lines/columns,
called "dvs envelope". It also uses an extra 12 lines/columns
at the sensor for BYT.

As those are not visible to userspace, the V4L2 API should
decrement such values when reporting the current resolution.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:42 +00:00
Mauro Carvalho Chehab
5380c4cfeb media: atomisp: don't print errors for ignored MBUS formats
The bayer formats aren't currently available for userspace
to select: those are marked as IA_CSS_FRAME_FORMAT_RAW and
trying to get them result on binary firmware load errors:

	[74625.258097] atomisp-isp2 0000:00:03.0: Using binary isp_preview_var_isp2 (id 22), type 0, mode 1, continuous true
	[74625.258146] atomisp-isp2 0000:00:03.0: Seeking for binary failed at:
	[74625.258161] CPU: 3 PID: 2792 Comm: v4l2grab Tainted: G         C        5.15.0-rc4+ #77
	[74625.258190] Hardware name: ASUSTeK COMPUTER INC. T101HA/T101HA, BIOS T101HA.306 04/23/2019
	[74625.258208] Call Trace:
	[74625.258231]  dump_stack_lvl+0x46/0x5a
	[74625.258272]  ia_css_binary_find+0xa7d/0xcf0 [atomisp]
	[74625.258570]  load_preview_binaries+0x323/0x3c0 [atomisp]
	...
	[74625.265892] atomisp-isp2 0000:00:03.0: can't create streams
	[74625.265937] atomisp-isp2 0000:00:03.0: __get_frame_info 1604x1200 (padded to 0) returned -22
	[74625.265962] atomisp-isp2 0000:00:03.0: Can't set format on ISP. Error -22

As those formats are ignored by purpose, it doesn't make any sense
to print a message like:

	atomisp_enum_fmt_cap(): format for code 3007 not found.

for those.

Yet, some day it would be interesting to also report the bayer
formats, letting userspace to decode them on a different way.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:42 +00:00
Mauro Carvalho Chehab
2b806251a5 media: atomisp: report colorspace information
While different sensors could have different colorspaces, the
colorspace V4L2 support didn't exist by the time atomisp driver
was written. So, the sensors won't have any data about that.

So, let's report what Asus T101HA uses (ov2680 sensor).

It may require further changes, if other sensors used on this
driver have different colorspaces.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:42 +00:00
Mauro Carvalho Chehab
6c84a35d78 media: atomisp: properly implement g_fmt
The current logic only initializes pipe->pix after setting up a
pipeline - e. g. after start streaming.

While it makes sense to get the format of the pipeline, when
it is set, this breaks support for generic applications, as they
rely on getting the current sensor format (which is usually the
highest resolution format).

So, implement a call to the sensor's get_fmt, when this is called
before setting up a pipeline.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:41 +00:00
Mauro Carvalho Chehab
331adc2f40 media: atomisp: better describe get_frame_info issues
When atomisp is used by a normal client, it fails to get
frame info. However, the information is confusing and misleading,
as there are several wrappers for such function, and the error
could be on different places.

So, improve the error log in order to allow narrowing down
where the error is actually occuring.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:41 +00:00
Mauro Carvalho Chehab
fae46cb053 media: atomisp: fix enum formats logic
Changeset 374d62e7aa ("media: v4l2-subdev: Verify v4l2_subdev_call() pad config argument")
added an extra verification for a pads parameter for enum mbus
format code.

Such change broke atomisp, because now the V4L2 core
refuses to enum MBUS formats if the state is empty.

So, add .which field in order to select the active formats,
in order to make it work again.

While here, improve error messages.

Fixes: 374d62e7aa ("media: v4l2-subdev: Verify v4l2_subdev_call() pad config argument")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:41 +00:00
Tsuchiya Yuto
c10bcb1346 media: atomisp: add NULL check for asd obtained from atomisp_video_pipe
This is almost a BUG report with RFC patch that just avoids kernel
oopses. Thus, prefixed with [BUG][RFC].

Here is the kernel log after running `v4l2-compliance -d /dev/video4`
with this patch applied:

	kern  :err   : [25507.580392] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
	kern  :warn  : [25507.592343] isys dma store at addr(0xcd408) val(0)
	kern  :err   : [25507.592995] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.593685] atomisp-isp2 0000:00:03.0: atomisp_g_input(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.593719] atomisp-isp2 0000:00:03.0: atomisp_g_parm(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.593727] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
	[omitting 42 same messages]
	kern  :err   : [25507.593976] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.594191] atomisp-isp2 0000:00:03.0: atomisp_g_input(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.594449] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
	[omitting 43 same messages]
	kern  :err   : [25507.594756] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.594779] atomisp-isp2 0000:00:03.0: atomisp_g_ctrl(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.594787] atomisp-isp2 0000:00:03.0: atomisp_s_ctrl(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.594803] atomisp-isp2 0000:00:03.0: atomisp_camera_g_ext_ctrls(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.594880] atomisp-isp2 0000:00:03.0: atomisp_enum_fmt_cap(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.594915] atomisp-isp2 0000:00:03.0: atomisp_g_parm(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.595058] atomisp-isp2 0000:00:03.0: atomisp_try_fmt(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.595089] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.595124] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.595221] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.595241] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.601571] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
	kern  :warn  : [25507.607496] isys dma store at addr(0xcd408) val(0)
	kern  :err   : [25507.608604] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.611988] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
	kern  :warn  : [25507.617420] isys dma store at addr(0xcd408) val(0)
	kern  :err   : [25507.618429] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.618811] atomisp-isp2 0000:00:03.0: atomisp_g_parm(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.622193] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
	kern  :warn  : [25507.627355] isys dma store at addr(0xcd408) val(0)
	kern  :err   : [25507.628391] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.631143] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
	kern  :warn  : [25507.635813] isys dma store at addr(0xcd408) val(0)
	kern  :err   : [25507.636489] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.636504] atomisp-isp2 0000:00:03.0: atomisp_s_input(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.636516] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.639111] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
	kern  :warn  : [25507.646152] isys dma store at addr(0xcd408) val(0)
	kern  :err   : [25507.646831] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.646847] atomisp-isp2 0000:00:03.0: atomisp_s_input(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.650079] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
	kern  :warn  : [25507.657476] isys dma store at addr(0xcd408) val(0)
	kern  :err   : [25507.658741] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.658759] atomisp-isp2 0000:00:03.0: atomisp_s_input(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.658771] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC
	kern  :err   : [25507.660959] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
	kern  :warn  : [25507.666665] isys dma store at addr(0xcd408) val(0)
	kern  :err   : [25507.667397] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC

[mchehab: fix coding style]
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:40 +00:00
Alan
59a27d5c98 media: atomisp: Fix up the open v load race
Date: Mon, 06 Nov 2017 23:36:36 +0000

This isn't the ideal final solution but it stops the main problem for now
where an open (often from udev) races the device initialization and we try
and load the firmware twice at the same time. This needless to say doesn't
usually end well.

[kitakar: ported to upstream Kernel]
[mchehab: make comments to use our coding style]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:40 +00:00
Tsuchiya Yuto
634557be5a media: atomisp: add Microsoft Surface 3 ACPI vars
Microsoft Surface 3 does not describe CsiPort/CsiLanes in DSDT [1] or
EFI, or at least not desctibed in the forms the current atomisp driver
expects. This results in the default values (port: 0 lanes: 1) to be
used, which does not work.

So, define them ourselves in the driver.

The user-facing camera is AR0330 (2-lane) and the world-facing camera
is OV8835 (4-lane).

According to the portconfigs definition in atomisp_csi_lane_config()
[atomisp_v4l2.c]:

	} portconfigs[] = {
		/* Tangier/Merrifield available lane configurations */
		{ 0x00, { 4, 1, 0 } },		/* 00000 */
		{ 0x01, { 3, 1, 0 } },		/* 00001 */
		{ 0x02, { 2, 1, 0 } },		/* 00010 */
		{ 0x03, { 1, 1, 0 } },		/* 00011 */
		{ 0x04, { 2, 1, 2 } },		/* 00100 */
		{ 0x08, { 3, 1, 1 } },		/* 01000 */
		{ 0x09, { 2, 1, 1 } },		/* 01001 */
		{ 0x0a, { 1, 1, 1 } },		/* 01010 */

		/* Anniedale/Moorefield only configurations */
		{ 0x10, { 4, 2, 0 } },		/* 10000 */
		{ 0x11, { 3, 2, 0 } },		/* 10001 */
		{ 0x12, { 2, 2, 0 } },		/* 10010 */
		{ 0x13, { 1, 2, 0 } },		/* 10011 */
		{ 0x14, { 2, 2, 2 } },		/* 10100 */
		{ 0x18, { 3, 2, 1 } },		/* 11000 */
		{ 0x19, { 2, 2, 1 } },		/* 11001 */
		{ 0x1a, { 1, 2, 1 } },		/* 11010 */
	};

4-lane camera is always connected to the PRIMARY (port1) port [2]. In
this case, 2-lane camera can be connected to the only SECONDARY (port0)
port.

So, add these data accordingly as the gmin_cfg_var ACPI variables for
Surface 3.

[1] 7da48a392b/surface_3/dsdt.dsl (L5879-L6278)

[2] Yes, the PRIMARY port is port1 according to atomisp_camera_port
    [atomisp.h]:

	enum atomisp_camera_port {
		ATOMISP_CAMERA_PORT_SECONDARY,
		ATOMISP_CAMERA_PORT_PRIMARY,
		ATOMISP_CAMERA_PORT_TERTIARY,
		ATOMISP_CAMERA_NR_PORTS
	};

Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:39 +00:00
Tsuchiya Yuto
bb4924c215 media: atomisp: pci: release_version is now irci_stable_candrpv_0415_20150521_0458
Now that we made atomisp work with firmware version
irci_stable_candrpv_0415_20150521_0458 also for ISP2401, the
release_version for ISP2401 is not irci_ecr-master_20150911_0724
anymore.

So, use the same release_version for both ISP2400 and ISP2401 (i.e.,
irci_stable_candrpv_0415_20150521_0458).

Referred to the following diff to make this patch:
- https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/diff/drivers/staging/media/atomisp/pci/sh_css_firmware.c?id=3c0538fbad9f1d07d588f631e380256d941e3d3a
  ("media: atomisp: get rid of most checks for ISP2401 version")
  changes for file sh_css_firmware.c

Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:39 +00:00
Tsuchiya Yuto
b37bca2eba media: atomisp: make fw ver irci_stable_candrpv_0415_20150521_0458 work
This patch removes the unnamed struct `shading` from
`struct sh_css_sp_pipeline` as well as its usage [1].

[1] added on updating css version to irci_master_20150701_0213
    https://raw.githubusercontent.com/intel/ProductionKernelQuilts/cht-m1stable-2016_ww31/uefi/cht-m1stable/patches/cam-0439-atomisp2-css2401-and-2401_legacy-irci_master_2015070.patch
    ("atomisp2: css2401 and 2401_legacy-irci_master_20150701_0213")

This patch, together with the 4 patches applied before it revert incompatible
changes in the current css version for ISP2401 (irci_ecr-master_20150911_0724)
back to irci_stable_candrpv_0415_20150521_0458.

Some `struct`s are `sizeof()`ed in sh_css_firmware.c file. So, I guess
issues will happen if these sizes are changed. Therefore, keep them the
same as css version irci_stable_candrpv_0415_20150521_0458 to make atomisp
work for firmware made for such css version since we don't have firmware
made for the current css version.

Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:39 +00:00
Tsuchiya Yuto
bbaa836b53 media: atomisp: remove polling_mode and subscr_index
This patch removes polling_mode and subscr_index from
`struct virtual_input_system_stream_s` as well as its usage [1]. Note
that for subscr_index, only the definition were removed because it was
not used anywhere.

[1] added on updating css version to irci_master_20150701_0213
    https://raw.githubusercontent.com/intel/ProductionKernelQuilts/cht-m1stable-2016_ww31/uefi/cht-m1stable/patches/cam-0439-atomisp2-css2401-and-2401_legacy-irci_master_2015070.patch
    ("atomisp2: css2401 and 2401_legacy-irci_master_20150701_0213")

Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:38 +00:00
Tsuchiya Yuto
c665ccf1ff media: atomisp: remove struct ia_css_isp_parameter xnr3
This patch removes `struct ia_css_isp_parameter xnr3` from
`struct ia_css_memory_offsets` as well as its usage [1].

[1] added on updating css version to irci_master_20150701_0213
    https://raw.githubusercontent.com/intel/ProductionKernelQuilts/cht-m1stable-2016_ww31/uefi/cht-m1stable/patches/cam-0439-atomisp2-css2401-and-2401_legacy-irci_master_2015070.patch
    ("atomisp2: css2401 and 2401_legacy-irci_master_20150701_0213")

Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:38 +00:00
Tsuchiya Yuto
6626281819 media: atomisp: remove struct ia_css_isp_parameter
This patch removes `struct ia_css_isp_parameter sc` from
`struct ia_css_config_memory_offsets` as well as its usage [1].

[1] added on updating css version to irci_master_20150701_0213
    https://raw.githubusercontent.com/intel/ProductionKernelQuilts/cht-m1stable-2016_ww31/uefi/cht-m1stable/patches/cam-0439-atomisp2-css2401-and-2401_legacy-irci_master_2015070.patch
    ("atomisp2: css2401 and 2401_legacy-irci_master_20150701_0213")

Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:38 +00:00
Tsuchiya Yuto
fc3b36a783 media: atomisp: drop luma_only, input_yuv and input_raw from ISP2401
This patch removes luma_only, input_yuv and input_raw from
`struct ia_css_binary_info` as well as its usage [1]. Note that for
input_yuv and input_raw, only the definitions were removed because these
were not used anywhere.

[1] added on updating css version to irci_master_20150701_0213
    https://raw.githubusercontent.com/intel/ProductionKernelQuilts/cht-m1stable-2016_ww31/uefi/cht-m1stable/patches/cam-0439-atomisp2-css2401-and-2401_legacy-irci_master_2015070.patch
    ("atomisp2: css2401 and 2401_legacy-irci_master_20150701_0213")

Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:37 +00:00
Tsuchiya Yuto
5a1b272555 media: atomisp: fix ifdefs in sh_css.c
## `if (pipe->stream->config.mode == IA_CSS_INPUT_MODE_TPG) {` case

The intel-aero atomisp has `#if defined(IS_ISP_2400_SYSTEM)` [1]. It is
to be defined in the following two places [2]:

  - css/hive_isp_css_common/system_global.h
  - css/css_2401_csi2p_system/system_global.h

and the former file is to be included on ISP2400 devices, too. So, it
is to be defined for both ISP2400 and ISP2401 devices.

Because the upstreamed atomisp driver now supports only ISP2400 and
ISP2401, just remove the ISP version test again. This matches the other
upstream commits like 3c0538fbad ("media: atomisp: get rid of most
checks for ISP2401 version").

While here, moved the comment for define GP_ISEL_TPG_MODE to the
appropriate place.

[1] a1b673258f/drivers/media/pci/atomisp/css/sh_css.c (L552-L558)
[2] https://github.com/intel-aero/linux-kernel/search?q=IS_ISP_2400_SYSTEM

  ## `isys_stream_descr->polling_mode` case

This does not exist on the intel-aero atomisp. This is because it is
based on css version irci_stable_candrpv_0415_20150521_0458.

On the other hand, the upstreamed atomisp is based on the following css
version depending on the ISP version using ifdefs:

  - ISP2400: irci_stable_candrpv_0415_20150521_0458
  - ISP2401: irci_master_20150911_0724

The `isys_stream_descr->polling_mode` usage was added on updating css
version to irci_master_20150701_0213 [3].

So, it is not a ISP version specific thing, but css version specific
thing. Because the upstreamed atomisp driver uses irci_master_20150911_0724
for ISP2401, re-add the ISP version check for now.

I say "for now" because ISP2401 should eventually use the same css
version with ISP2400 (i.e., irci_stable_candrpv_0415_20150521_0458)

[3] https://raw.githubusercontent.com/intel/ProductionKernelQuilts/cht-m1stable-2016_ww31/uefi/cht-m1stable/patches/cam-0439-atomisp2-css2401-and-2401_legacy-irci_master_2015070.patch
    ("atomisp2: css2401 and 2401_legacy-irci_master_20150701_0213")
    Link to Intel's Android kernel patch.

 ## `coord = &me->config.internal_frame_origin_bqs_on_sctbl;` case

it was added on commit 4f744a573d ("media: atomisp: make
sh_css_sp_init_pipeline() ISP version independent") for ISP2401. Because
the upstreamed atomisp for the ISP2401 part is based on
irci_master_20150911_0724, hence the difference.

Because the upstreamed atomisp driver uses irci_master_20150911_0724
for ISP2401, revert the test back to `if (IS_ISP2401)`.

Fixes: 27333dadef ("media: atomisp: adjust some code at sh_css that could be broken")
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:37 +00:00
Tsuchiya Yuto
6fb5d718b0 media: atomisp: use IA_CSS_ERROR() for error messages in sh_css_mipi.c
Some debug messages for error cases (messages contain "error: ") use
IA_CSS_DEBUG_TRACE_PRIVATE debug level. This causes these error messages
not to appear unless users raise debug output level to 7 or higher (using
module parameter, dbg_level=7).

So, use IA_CSS_DEBUG_ERROR debug level (dbg_level=1) instead considering
that these are error messages. There is already a macro IA_CSS_ERROR()
for this use case. Let's use it. It automatically appends "error: " at
the beginning and a newline to a message. Therefore, we can remove them
from these messages.

While here, remove the unnecessary newline from one IA_CSS_ERROR()
occurrence in the same file.

Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:37 +00:00
Tsuchiya Yuto
d21ce8c2f7 media: atomisp: fix inverted error check for ia_css_mipi_is_source_port_valid()
The function ia_css_mipi_is_source_port_valid() returns true if the port
is valid. So, we can't use the existing err variable as is.

To fix this issue while reusing that variable, invert the return value
when assigning it to the variable.

Fixes: 3c0538fbad ("media: atomisp: get rid of most checks for ISP2401 version")
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:36 +00:00
Tsuchiya Yuto
9f6b4fa2d2 media: atomisp: do not use err var when checking port validity for ISP2400
Currently, the `port >= N_CSI_PORTS || err` checks for ISP2400 are always
evaluated as true because the err variable is set to `-EINVAL` on
declaration but the variable is never used until the evaluation.

Looking at the diff of commit 3c0538fbad ("media: atomisp: get rid of
most checks for ISP2401 version"), the `port >= N_CSI_PORTS` check is
for ISP2400 and the err variable check is for ISP2401. Fix this issue
by adding ISP version test there accordingly.

Fixes: 3c0538fbad ("media: atomisp: get rid of most checks for ISP2401 version")
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:36 +00:00
Tsuchiya Yuto
e1921cd146 media: atomisp: fix inverted logic in buffers_needed()
When config.mode is IA_CSS_INPUT_MODE_BUFFERED_SENSOR, it rather needs
buffers. Fix it by inverting the return value.

Fixes: 3c0538fbad ("media: atomisp: get rid of most checks for ISP2401 version")
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:35 +00:00
Tsuchiya Yuto
5bfbf65fcc media: atomisp: fix punit_ddr_dvfs_enable() argument for mrfld_power up case
When comparing with intel-aero atomisp [1], it looks like
punit_ddr_dvfs_enable() should take `false` as an argument on mrfld_power
up case.

Code from the intel-aero kernel [1]:

        int atomisp_mrfld_power_down(struct atomisp_device *isp)
        {
        [...]
		/*WA:Enable DVFS*/
		if (IS_CHT)
			punit_ddr_dvfs_enable(true);

        int atomisp_mrfld_power_up(struct atomisp_device *isp)
        {
        [...]
		/*WA for PUNIT, if DVFS enabled, ISP timeout observed*/
		if (IS_CHT)
			punit_ddr_dvfs_enable(false);

This patch fixes the inverted argument as per the intel-aero code, as
well as its comment. While here, fix space issues for comments in
atomisp_mrfld_power().

Note that it does not seem to be possible to unify the up/down cases for
punit_ddr_dvfs_enable(), i.e., we can't do something like the following:

        if (IS_CHT)
		punit_ddr_dvfs_enable(!enable);

because according to the intel-aero code [1], the DVFS is disabled
before "writing 0x0 to ISPSSPM0 bit[1:0]" and the DVFS is enabled after
"writing 0x3 to ISPSSPM0 bit[1:0]".

[1] a1b673258f/drivers/media/pci/atomisp/atomisp_driver/atomisp_v4l2.c (L431-L514)

Fixes: 0f441fd70b ("media: atomisp: simplify the power down/up code")
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:35 +00:00
Tsuchiya Yuto
ce3015b721 media: atomisp: add missing media_device_cleanup() in atomisp_unregister_entities()
After the commit 9832e155f1 ("[media] media-device: split media
initialization and registration"), calling media_device_cleanup()
is needed it seems. However, currently it is missing for the module
unload path.

Note that for the probe failure path, it is already added in
atomisp_register_entities().

This patch adds the missing call of media_device_cleanup() in
atomisp_unregister_entities().

Fixes: a49d25364d ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:35 +00:00
Bingbu Cao
c09d776eaa media: dw9768: activate runtime PM and turn off device
When dw9768 working with ACPI systems, the dw9768 was turned
by i2c-core during probe, driver need activate the PM runtime
and ask runtime PM to turn off the device.

Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:34 +00:00
Qing Wang
2a99839240 media: i2c: ccs: replace snprintf in show functions with sysfs_emit
show() should not use snprintf() when formatting the value to be
returned to user space.

Fix the following coccicheck warning:
drivers/media/i2c/ccs/ccs-core.c:3761: WARNING: use scnprintf or sprintf.

Signed-off-by: Qing Wang <wangqing@vivo.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:34 +00:00
Dan Carpenter
85db29d22c media: ipu3-cio2: fix error code in cio2_bridge_connect_sensor()
Return -ENODEV if acpi_get_physical_device_location() fails.  Don't
return success.

Fixes: 485aa3df0d ("media: ipu3-cio2: Parse sensor orientation and rotation")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:34 +00:00
Bingbu Cao
9b005ce906 media: staging: ipu3-imgu: clarify the limitation of grid config
There are some grid configuration limitations for ImgU, which was
not described clearly in current uAPI header file, add the description
to help user to set the grid configuration correctly.

Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:33 +00:00
Mauro Carvalho Chehab
cffd616086 media: atomisp: get rid of two unused functions
Those cause build to break with -Werror with clang-12:

	drivers/staging/media/atomisp/pci/hive_isp_css_common/host/gdc.c:121:24: error: unused function 'gdc_reg_load' [-Werror,-Wunused-function]
	drivers/staging/media/atomisp/pci/isp/kernels/raw/raw_1.0/ia_css_raw.host.c:33:1: error: unused function 'sh_css_elems_bytes_from_info' [-Werror,-Wunused-function]

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:33 +00:00
Dillon Min
002e8f0d59 media: stm32-dma2d: STM32 DMA2D driver
This V4L2 subdev m2m driver enables Chrom-Art Accelerator unit
of STMicroelectronics STM32 SoC series.

Currently support r2m, m2m, m2m_pfc functions.
- r2m, Filling a part or the whole of a destination image with a specific
  color.
- m2m, Copying a part or the whole of a source image into a part or the
  whole of a destination.
- m2m_pfc, Copying a part or the whole of a source image into a part or the
  whole of a destination image with a pixel format conversion.

[hverkuil: fix typo in commit log]

Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:33 +00:00
Dillon Min
ef9f18a9e3 media: v4l2-ctrls: Add RGB color effects control
Add V4L2_COLORFX_SET_RGB color effects control, V4L2_CID_COLORFX_RGB
for RGB color setting.

with two mirror changes:
- change 0xFFFFFF to 0xffffff
- fix comments 2^24 to 2^24 - 1

[hverkuil: dropped spaces around + with V4L2_CID_BASE for consistency]

Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:32 +00:00
Dillon Min
ee4a929e0e media: v4l2-ctrls: Add V4L2_CID_COLORFX_CBCR max setting
The max of V4L2_CID_COLORFX_CBCR is 0xffff, so add it to v4l2_ctrl_fill()
to sure not beyond that.

Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:32 +00:00
Dillon Min
c9ee220d76 media: videobuf2: Fix the size printk format
Since the type of parameter size is unsigned long,
it should printk by %lu, instead of %ld, fix it.

Fixes: 7952be9b6e ("media: drivers/media/common/videobuf2: rename from videobuf")
Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:31 +00:00
Dillon Min
0a08088f82 media: v4l2-mem2mem: add v4l2_m2m_get_unmapped_area for no-mmu platform
For platforms without MMU the m2m provides a helper method
v4l2_m2m_get_unmapped_area(), The mmap() routines will call
this to get a proposed address for the mapping.

More detailed information about get_unmapped_area can be found in
Documentation/nommu-mmap.txt

Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:31 +00:00
Dillon Min
68dda3e025 media: dt-bindings: media: add document for STM32 DMA2d bindings
This adds documentation of device tree bindings for the STM32 DMA2D

Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:31 +00:00
Dillon Min
c9c9e2ab03 media: admin-guide: add stm32-dma2d description
add stm32-dma2d description for dma2d driver

Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-11-15 08:11:30 +00:00
Linus Torvalds
fa55b7dcdc Linux 5.16-rc1 2021-11-14 13:56:52 -08:00
Gustavo A. R. Silva
dee2b702bc kconfig: Add support for -Wimplicit-fallthrough
Add Kconfig support for -Wimplicit-fallthrough for both GCC and Clang.

The compiler option is under configuration CC_IMPLICIT_FALLTHROUGH,
which is enabled by default.

Special thanks to Nathan Chancellor who fixed the Clang bug[1][2]. This
bugfix only appears in Clang 14.0.0, so older versions still contain
the bug and -Wimplicit-fallthrough won't be enabled for them, for now.

This concludes a long journey and now we are finally getting rid
of the unintentional fallthrough bug-class in the kernel, entirely. :)

Link: 9ed4a94d64 [1]
Link: https://bugs.llvm.org/show_bug.cgi?id=51094 [2]
Link: https://github.com/KSPP/linux/issues/115
Link: https://github.com/ClangBuiltLinux/linux/issues/236
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-14 13:27:30 -08:00
Linus Torvalds
ce49bfc8d0 Minor tweaks for 5.16:
* Clean up open-coded swap() calls.
  * A little bit of #ifdef golf to complete the reunification of the
    kernel and userspace libxfs source code.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAmGNT1IACgkQ+H93GTRK
 tOucKA//Qk2NX3QBm/8pCrFE5V+eqooPANhZmzeviJCN/6++jcNOy0f+YK6JXVRC
 U2WdotHFH5fF6lsDkzNtMPHZ8JMZmOfEiPx5CGFiWT5iUW7FbLkROHm7GFtbwMoH
 qm3Lt7PbdSzJqTuOTvaGCw1xWkjDXMLdsdFM7mx3JO5zT9a/fCqjjmyR2Kl0qcSP
 RzfruVe20wUka2BeaXfZzSasgfLswratkU4xsiNiwA37yQaldzhrg8fg6uP3OSYi
 dkWFXi6WdWwQzARnjWNPwigUwA3xVaYgV+I6+ME0DYsUBvywZzUg3pkowhRAHyA9
 kv86L5Zt5K7kQcVqyd+lIvIuAcGrOZ9hA18PIXnwahLBqmjcqAJoF9XhTTZDMD4J
 LfujGMrf7DSDcf0vH8G9wlQQthsPGUOoFia5rr8MhdVVNee/b1Qvwsh7kmyg0DOK
 9WuNQxGPd7s+X+kwdmGrK7E6fqyPwEfC43l8wtCiBIyGz6QcorwD7kH9DGzv5xGF
 NX7WQeKvcaoXn1XVfonb0YgdVOnbyqK4AiY3Po1Ood3IxGyiLGCgDnusvYu+C9/r
 T0rRMbljkX1lUKqfzGkg2egOKPR+8RFgFKrKNSXUkDxl8TFLRd3ZObowPPlohq1I
 9lIIirip5UFYRv+7srDU1oZPWkvwkpJmaMFgagD3w+OWdo6zwao=
 =wsFu
 -----END PGP SIGNATURE-----

Merge tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull xfs cleanups from Darrick Wong:
 "The most 'exciting' aspect of this branch is that the xfsprogs
  maintainer and I have worked through the last of the code
  discrepancies between kernel and userspace libxfs such that there are
  no code differences between the two except for #includes.

  IOWs, diff suffices to demonstrate that the userspace tools behave the
  same as the kernel, and kernel-only bits are clearly marked in the
  /kernel/ source code instead of just the userspace source.

  Summary:

   - Clean up open-coded swap() calls.

   - A little bit of #ifdef golf to complete the reunification of the
     kernel and userspace libxfs source code"

* tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: sync xfs_btree_split macros with userspace libxfs
  xfs: #ifdef out perag code for userspace
  xfs: use swap() to make dabtree code cleaner
2021-11-14 12:18:22 -08:00
Linus Torvalds
c3b68c27f5 parisc architecture build-, trace-, backtrace- and page table fixes
Fix a build error in stracktrace.c, fix resolving of addresses to
 function names in backtraces, fix single-stepping in assembly code
 and flush userspace pte's when using set_pte_at().
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYZAyIAAKCRD3ErUQojoP
 X8zUAQCV4fijXlUEOnZorH42QsSvs1SowHXu2YdHU8CmauWVawEAt14Zj3fmMBcS
 +uSacieZROU9maQtGgJAYHZVJwgPyQY=
 =OQRw
 -----END PGP SIGNATURE-----

Merge tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull more parisc fixes from Helge Deller:
 "Fix a build error in stracktrace.c, fix resolving of addresses to
  function names in backtraces, fix single-stepping in assembly code and
  flush userspace pte's when using set_pte_at()"

* tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc/entry: fix trace test in syscall exit path
  parisc: Flush kernel data mapping in set_pte_at() when installing pte for user page
  parisc: Fix implicit declaration of function '__kernel_text_address'
  parisc: Fix backtrace to always include init funtion names
2021-11-14 11:53:59 -08:00
Linus Torvalds
24318ae80d arch/sh updates for 5.16
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJhkUvoAAoJELcQ+SIFb8HaQG8H/1pF/zhT+xYAK7dMOYfdyl9R
 UGgnNGR2kjPDhsAkMHIYWVopP2KFV4kA4TCe8UcEt4GPeWZgGjV8lIaHJa/kdUsH
 5tyRYtC8ZtVhJMVJQ8jZYZcTwOqYFFGtCksPq6/j0dHE0Gf+nQStSXNZqi8/XxE9
 c3jDg+l7PVwdl7LWFedPVXcflhD5JLrRhyA/17V0INWrqP/MboXGRyq/Yluksw7x
 C89ZXrgRE+5tN9icfRT4pl/XBpezWQkjuvsyHM9DWOjqICXfng8yeB5MZ/+R2uyF
 qbXRSGqICOFhRRV9m/L0kypCYYiaZ8bBiYvLeGNggmpUJVMosIDFpS7kiYQavuA=
 =dnw0
 -----END PGP SIGNATURE-----

Merge tag 'sh-for-5.16' of git://git.libc.org/linux-sh

Pull arch/sh updates from Rich Felker.

* tag 'sh-for-5.16' of git://git.libc.org/linux-sh:
  sh: pgtable-3level: Fix cast to pointer from integer of different size
  sh: fix READ/WRITE redefinition warnings
  sh: define __BIG_ENDIAN for math-emu
  sh: math-emu: drop unused functions
  sh: fix kconfig unmet dependency warning for FRAME_POINTER
  sh: Cleanup about SPARSE_IRQ
  sh: kdump: add some attribute to function
  maple: fix wrong return value of maple_bus_init().
  sh: boot: avoid unneeded rebuilds under arch/sh/boot/compressed/
  sh: boot: add intermediate vmlinux.bin* to targets instead of extra-y
  sh: boards: Fix the cacography in irq.c
  sh: check return code of request_irq
  sh: fix trivial misannotations
2021-11-14 11:37:49 -08:00
Linus Torvalds
6ea45c57dc ARM fixes for 5.16-rc1:
- Fix early_iounmap
 - Drop cc-option fallbacks for architecture selection
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAmGRL48ACgkQ9OeQG+St
 rGQyXA//ZuMjsA615TncG5686glPds6y+SoiWAPosz9ElGawL5Ke9vybIBPxYrZj
 gSaR4aiyoCy4B22tSQcAuyd8Ai8+cX5jUv7fbgZcCWWQto0OiD3S1jpaGwaPN+3I
 1fwbUvUjrdzzDfGHJbFwBYykkQ8bPWrnjtZ9EK8g9t7QuetqkZrihw/gfqHeflnu
 Ad9WqEiHWDguOU9kdT6uGZf5RpfjwoLuxYNMSQVktQw81+Lk0GGfEroR2ZqUZAf4
 YIrhaKTxjXfkm4Hv6bfLtSYxWY0sw1ziO0qhtEJHKQyE5hbMOy5Dhdq9Ntefkin1
 /+OaNZzLiKuv6ZqWJjg5ViXc0pVgDNfLKbj8aicGW3966F13OISq9MIy9pkivK+2
 R7ROhcdkJ4Tz6sIbAZBxmyFbgY+sjZ0F2OoOkjcLUCfyMGqfl8FohNd6EvSs0yP8
 6zfnUOg4vBkLg80d/lg6RjSszqOSdFjW4Qbi8HQoDYk9bemLPtVxQnjYsd2RMZhM
 oKTkNTcA17MUCYncw6xu2lL3ahz15XMxBf/L2mfFwFCIplKvpTIYbP5BWSisjiyz
 JhbjLj9PaCOmubu+n2JKK4dm0GeEngWhu5CW0xN0eQ0at8CJa9dmt5y3V1V8//jj
 F3Xltms1d67nHr+6pkE+EYp4YMTMBO1L7opsktTs1vCIJ2trTWM=
 =Ksk/
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:

 - Fix early_iounmap

 - Drop cc-option fallbacks for architecture selection

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9156/1: drop cc-option fallbacks for architecture selection
  ARM: 9155/1: fix early early_iounmap()
2021-11-14 11:30:50 -08:00
Linus Torvalds
0d1503d8d8 Devicetree fixes for v5.16, take 1:
- 2 fixes due to DT node name changes on Arm, Ltd. boards
 
 - Treewide rename of Ingenic CGU headers
 
 - Update ST email addresses
 
 - Remove Netlogic DT bindings
 
 - Dropping few more cases of redundant 'maxItems' in schemas
 
 - Convert toshiba,tc358767 bridge binding to schema
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmGRN/wQHHJvYmhAa2Vy
 bmVsLm9yZwAKCRD6+121jbxhw0EXD/0byDq/gx0BOgSY18wOWp0W3tnJiudRrKNk
 8+TqfphpridGSzZryboBPQ3U06eOT1pMV9EBzHfqeb87nIneMxZ26KhgMPRFf7qt
 87G2tyfq4Itd59HATC/8xsq/5uiCONksbPojhjn6SrI4wLBzTegIYG5ZiocQw2tP
 vcW9wDAOfcRVfXBtQwmYD7nkeShaoTrv+EBcAFhg4XB43TWyezCCBqvAz0qDSl7q
 N/9xomgsB/fG1ImL/UWjPuPix64I9mrop7d8+C17980RJM10e5wL/eDWpbvWxqy6
 R7nTHT9HWnbcV5ywgBTh3W6iQw9EGyytD0Uzw3v+Meoga1/zCBkF48mEin61nY1c
 i44os73B9mwSZo34qysrFkir+NBNRBAwdP7z+GrarB9twlcIdfjfInQYWlNP73Yb
 zJ/XIVrfn6GsEZRdgXXK5VHL0ffDYzwoGEHSU6m0cTJI+iNQT4WQ89HkhMHG1q0d
 pRwKCE75mhMrwvniBYinL8I8LuMAJPZZKDpc6ZtBJdUdF6MFgXccJFdIBoho1TVL
 oHkaXWwUjkGXliTdWX7UJk4zS4zNAyB1jLT9uHMrLvX7uVM1Dsy9bYWaU4ABB0xr
 viT/gj/nawCbGbniytZEfAAe1bsnZOLqxmqe3XGUgYuOPQLB2xSSjkrr7HYmuLmx
 1AskvHxO0w==
 =ukBC
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

 - Two fixes due to DT node name changes on Arm, Ltd. boards

 - Treewide rename of Ingenic CGU headers

 - Update ST email addresses

 - Remove Netlogic DT bindings

 - Dropping few more cases of redundant 'maxItems' in schemas

 - Convert toshiba,tc358767 bridge binding to schema

* tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: watchdog: sunxi: fix error in schema
  bindings: media: venus: Drop redundant maxItems for power-domain-names
  dt-bindings: Remove Netlogic bindings
  clk: versatile: clk-icst: Ensure clock names are unique
  of: Support using 'mask' in making device bus id
  dt-bindings: treewide: Update @st.com email address to @foss.st.com
  dt-bindings: media: Update maintainers for st,stm32-hwspinlock.yaml
  dt-bindings: media: Update maintainers for st,stm32-cec.yaml
  dt-bindings: mfd: timers: Update maintainers for st,stm32-timers
  dt-bindings: timer: Update maintainers for st,stm32-timer
  dt-bindings: i2c: imx: hardware do not restrict clock-frequency to only 100 and 400 kHz
  dt-bindings: display: bridge: Convert toshiba,tc358767.txt to yaml
  dt-bindings: Rename Ingenic CGU headers to ingenic,*.h
2021-11-14 11:11:51 -08:00
Linus Torvalds
622c72b651 A single fix for POSIX CPU timers to address a problem where POSIX CPU
timer delivery stops working for a new child task because copy_process()
 copies state information which is only valid for the parent task.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmGRDVUTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYocOFD/42NOdli73N+Jdq7APHUIHXzu+6DVT6
 CI5toLQw+0KPoF0s1wg4+J0YCDt2k0Pu4lOabF3Ze/+c6RlR5zfCXESqsXdHaCjh
 E91Vs57u0ataRMEHo6KB6eBIutuF8hyxfY6vVXfkTRNAreUIWiwWYrlB0G64JVOG
 +/l1W7adovjLcLwcW+ArrnLJwkBKtXunK6PVv2IrdRHwpMHbwoNRCCCFvzkqnWmQ
 4Yy2/NaB/PEBK5kezP1/j9EMcGCTWk1JJIm+l/PEwCCcbIgIdUahpW3XHAaqms6R
 oukqCvE5ukfmVzBFYBhCamhF8heyEeBVRqGU+Yyk48+I+DQFBCqaqa1NKSuEUdNL
 Nycy6Rp1yn7CHVSB461shMS6NJGOSNDBjv7vxer3WjV3HPJu7y0RrN7jXbkSfQnm
 hVKjkmbDEYwylgzFE5+T857NqD5MEXeuIBtTO08hNRnpd61aB3x+qq+8ElE6ST8Y
 pm6rMzw0AZ5buPK8QdGVDk0dD4WKObj1LzmRZvBtYeWynO6sxyKUl6B2CgAxrvn5
 D1Li2/arkJMCVeIuIL5uE6DPoxSh8J7OuEC4KeWX8M8xQSEDImqfZ+tDL2Esv6jv
 xDmymq584hiCBc1CJjCOA9kZYe6KNXC7lkVOns6GaKKzLhkrcvUR3dUGhMyzxAMO
 t9QIAinR6JwRRA==
 =EBbc
 -----END PGP SIGNATURE-----

Merge tag 'timers-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer fix from Thomas Gleixner:
 "A single fix for POSIX CPU timers to address a problem where POSIX CPU
  timer delivery stops working for a new child task because
  copy_process() copies state information which is only valid for the
  parent task"

* tag 'timers-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-cpu-timers: Clear task::posix_cputimers_work in copy_process()
2021-11-14 10:43:38 -08:00
Linus Torvalds
c36e33e2f4 A set of fixes for the interrupt subsystem:
- Core code:
 
     A regression fix for the Open Firmware interrupt mapping code where a
     interrupt controller property in a node caused a map property in the
     same node to be ignored.
 
   - Interrupt chip drivers:
 
     - Workaround a limitation in SiFive PLIC interrupt chip which silently
       ignores an EOI when the interrupt line is masked.
 
     - Provide the missing mask/unmask implementation for the CSKY MP
       interrupt controller.
 
   - PCI/MSI:
 
     - Prevent a use after free when PCI/MSI interrupts are released by
       destroying the sysfs entries before freeing the memory which is
       accessed in the sysfs show() function.
 
     - Implement a mask quirk for the Nvidia ION AHCI chip which does not
       advertise masking capability despite implementing it. Even worse the
       chip comes out of reset with all MSI entries masked, which due to the
       missing masking capability never get unmasked.
 
     - Move the check which prevents accessing the MSI[X] masking for XEN
       back into the low level accessors. The recent consolidation missed
       that these accessors can be invoked from places which do not have
       that check which broke XEN. Move them back to he original place
       instead of sprinkling tons of these checks all over the code.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmGRDCsTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoTL5D/4n7CUudohHPckr0Rl3LbnSUfyY9g3H
 irTKur71AT392YerJtQp+WBp3AKYMDD8wPTgydfpWe95ouIjx5jhb/co7uSifG6k
 ZssXYS10bkvjqyS8E2s5FnA5xbnagunK/R981qju14Ec39xqx1JzlUnO/Pra0Kcr
 5rBV7br9jJMBleBI4OFuS9fS8dVL1MH/yushkuDNfIKEnaElnaxaYUk/ZdzkMMAW
 lt1B+dPhK24t1hXQvZKp/iVQUGrJWdzzy9aDiUYPv1IZP+V5nbLMgmFvEv8jNdNa
 6kkfp0l30nXM9rgvcp2KkasVUPVhurVEwitzz9+tT6LRA+/kSwi2yx8/FwCVUcL6
 xD0AgKQgxOj/WwGJTZswvPu3afsLuw3rGmx5uH1IV40P9mPX0AiHWgvoaInHjzlJ
 QKFQ7mJEuUcC6cJ36RGqX9njhKvPIcUENGCTjGSffcXsWltPrOCg2mQFcsDa9fSH
 qPfXDVv4YINI+0MAlOULh6TLWQ07xy37HiskJu/AgILOfipoDi8pXdqNJRfvxB1S
 D3O8vB+SH3lPj69w4dtj7539SdNZn8CCyN3RbNlstl2vHV5Bus3cVk0CcOhG8qNW
 KwK/tSH8O0ZYHAsUu8OqBipXy6qOPi/10MJQn3NOpvvOmS4oDd+82bq+jp5qJpsG
 42WNuzEoBdaUiA==
 =LBQL
 -----END PGP SIGNATURE-----

Merge tag 'irq-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq fixes from Thomas Gleixner:
 "A set of fixes for the interrupt subsystem

  Core code:

   - A regression fix for the Open Firmware interrupt mapping code where
     a interrupt controller property in a node caused a map property in
     the same node to be ignored.

  Interrupt chip drivers:

   - Workaround a limitation in SiFive PLIC interrupt chip which
     silently ignores an EOI when the interrupt line is masked.

   - Provide the missing mask/unmask implementation for the CSKY MP
     interrupt controller.

  PCI/MSI:

   - Prevent a use after free when PCI/MSI interrupts are released by
     destroying the sysfs entries before freeing the memory which is
     accessed in the sysfs show() function.

   - Implement a mask quirk for the Nvidia ION AHCI chip which does not
     advertise masking capability despite implementing it. Even worse
     the chip comes out of reset with all MSI entries masked, which due
     to the missing masking capability never get unmasked.

   - Move the check which prevents accessing the MSI[X] masking for XEN
     back into the low level accessors. The recent consolidation missed
     that these accessors can be invoked from places which do not have
     that check which broke XEN. Move them back to he original place
     instead of sprinkling tons of these checks all over the code"

* tag 'irq-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  of/irq: Don't ignore interrupt-controller when interrupt-map failed
  irqchip/sifive-plic: Fixup EOI failed when masked
  irqchip/csky-mpintc: Fixup mask/unmask implementation
  PCI/MSI: Destroy sysfs before freeing entries
  PCI: Add MSI masking quirk for Nvidia ION AHCI
  PCI/MSI: Deal with devices lying about their MSI mask capability
  PCI/MSI: Move non-mask check back into low level accessors
2021-11-14 10:38:27 -08:00
Linus Torvalds
218cc8b860 A single fix for static calls to make the trampoline patching more robust
by placing explicit signature bytes after the call trampoline to prevent
 patching random other jumps like the CFI jump table entries.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmGRDKsTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoZeNEADEFTbUJKd8812O9vkY9we1GDAtH7bY
 z6sYkh0/rPvYjdPfHuwqW8tUAl+CO2ne2X8FRPKgEdRLg44BY4HaMHmujdbGh3fh
 zpqynUBPoOIgtWxAPGdF+JxjrKlzjFd+WwjG3qBXOF3pjKgCc5knyjTucsl6ced3
 wF293rSYrIJ6uRv2TTNbM5hWJdC0arWbdMFnwQTxeZR54WLpu7Wfm+CCK41w0fAU
 nrfSsv73WEwpmAZNh04wsZsf7h6yCO7dCrIJD/3mpJtrUVBZXuZAKDzUzJPvHJal
 T8LcKwxZQAgPv0ubmOCrolj98Qp6PAPSdDJbzNsCJUYEbBqaB2inJ0PeHcZPspy9
 YyW00EHXD2UKm/GNF/DIlhoiNxOSh8Wn4b6H5ZRML50bS7jsMp8YVbticWEjItL6
 N4/61c45/uPILBS+Lysj0aqyj4TvagiuffJFWjw3YAQ+Gp/pzlJwRNjrw7/4DxAx
 KdpM881IKCR8UowBz3gIiA9FrJv2dGMqq31Rs1fjuauxkIX0gV3c64tAIRWrVscT
 k6GKGvHSis5cT97K3yhmNH0BUND+Skeku8G/SnTkefvcB85aU/7HBkLLJpw0w84F
 F6PTCaCJOEHrl3ADkilsi3z0sKWrph6aAzDEgp6Q6cmo9ulFAGw0bjuJb59xsvVK
 flIvTLUY3n76FA==
 =dgiF
 -----END PGP SIGNATURE-----

Merge tag 'locking-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 static call update from Thomas Gleixner:
 "A single fix for static calls to make the trampoline patching more
  robust by placing explicit signature bytes after the call trampoline
  to prevent patching random other jumps like the CFI jump table
  entries"

* tag 'locking-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  static_call,x86: Robustify trampoline patching
2021-11-14 10:30:17 -08:00
Linus Torvalds
fc661f2dcb - Avoid touching ~100 config files in order to be able to select
the preemption model
 
 - clear cluster CPU masks too, on the CPU unplug path
 
 - prevent use-after-free in cfs
 
 - Prevent a race condition when updating CPU cache domains
 
 - Factor out common shared part of smp_prepare_cpus() into a common
 helper which can be called by both baremetal and Xen, in order to fix a
 booting of Xen PV guests
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmGQ8HcACgkQEsHwGGHe
 VUouoA//WAZ/dZu7IiM06JhZWswa2yNsdU8qQHys81lEqstaBqiWuZdg1qJTVIir
 2d0aN0keiPcsLyAsp1UJ2g/K/7D5vSJWDzsHKfEAToiAm8Tntai2LlSocWWfeSQm
 10grDHWpEHbj0hTHTA6HYOr2WbY4/LnR4cdL0WobIzivIrRTx49d0XUOUfWLP5KX
 60uM6dSjwpJrQUnvzk+bhGiHVmutFrEJy+UU/0o+nxkdhwraNiSbLi0007BGRCof
 6dokRRvLLR09dl1LMG51gVjQch4j/lCx6EWWUhYOFeV3I3gibSCNkmu7dpmMCBTR
 QWO01cR9gyFN4xQ2is4I36M5L0/8T+sbGvvXIXNDT/XWr0/p+g6p2mx0cd2XiYIr
 ZthGRcxxV/KGmxfPaygKS9tpQseMEIrdd6VjAnGfZ3OS6CtUvYt8d0B2Soj8FALQ
 N9fMXDIEP3uUZim8UvCT6HBKlj9LR5uI5n+dAQ6uzsenO9WqeGeldc/N26/+osdN
 vo4lNYTqiXJPhJvunYW5t4j5JnUa3grDHioAPWaQRJlWtEZBGKs9SXTcweg/KURb
 mNfe1RfSlGJt28RD3E18gXeSS7xWdKgpcVX1rmW/9tUjX04NNDWjq4sAzOj7c+Ir
 4sr78XgCY0pUxFaFYxvQWFUy7wcm0zAczo1RGUhcDTf1edDEvjo=
 =s2MX
 -----END PGP SIGNATURE-----

Merge tag 'sched_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler fixes from Borislav Petkov:

 - Avoid touching ~100 config files in order to be able to select the
   preemption model

 - clear cluster CPU masks too, on the CPU unplug path

 - prevent use-after-free in cfs

 - Prevent a race condition when updating CPU cache domains

 - Factor out common shared part of smp_prepare_cpus() into a common
   helper which can be called by both baremetal and Xen, in order to fix
   a booting of Xen PV guests

* tag 'sched_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  preempt: Restore preemption model selection configs
  arch_topology: Fix missing clear cluster_cpumask in remove_cpu_topology()
  sched/fair: Prevent dead task groups from regaining cfs_rq's
  sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain()
  x86/smp: Factor out parts of native_smp_prepare_cpus()
2021-11-14 09:39:03 -08:00
Linus Torvalds
f7018be292 - Prevent unintentional page sharing by checking whether a page
reference to a PMU samples page has been acquired properly before that
 
 - Make sure the LBR_SELECT MSR is saved/restored too
 
 - Reset the LBR_SELECT MSR when resetting the LBR PMU to clear any
 residual data left
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmGQ5z8ACgkQEsHwGGHe
 VUqqdQ/+JIV6t0yIj7aNADaakwAe+i9zFzzUuvb5KT0zPzZirswkz6xeZ4g8S8PZ
 lSjqKk8M2Yt3SJiqi/s3KNIOev52wtKGmeOFz1I+DUNpgk0wGHkRtVHV/iSptB61
 Kp/fJvOVppY5grs5B0fRYkM5e477RPyZo+E0COKnff1bQ+k+z2ItMLCVxFCxQS6k
 HmgPW7CBye811YcEg28lSwgS1OXiMZ19gACIsqnQ6kQP2Puo8+HT1/V1n+0grejb
 OeYxURuYSRPd6Ft76qz0YlRIe1dgKllUBr7b0AaM11ADBMtWBTxqJcQvq/mOIHmT
 9to0dVB/xFySR57iaL7BRuZFOrt8MRqJniEedMO99Dm9sxEVfHs1iXC9r7wZxQAf
 /HcvVkcyOJD92Kv+4LS5tKjowCByOYEJW2YQIgXEbA6oIhRuM9/fdxEW6lHwgdwc
 BPnOR6rtYuq+I+merBIIijAuf8OsIGY7ap2B+f7DkiOtA9+SHZsrU22J8T7CED/w
 gmrAC3+3KGt7YDs6WZTbvkXminZQyu5WpHe+2K6dlCIPmJLqEsYUx8TeXa/okyvb
 8ZXy/CfJNbHUrk6GZw7RFoeannwSPv9ZJO3Mfy5PDvwDk0Fj0J+/G92mR2Zucxpo
 siNyBCivPY5vBPqk+x6eUPev/C3wPS+dNrs4HOyr1N2gZwgTk40=
 =Ciqw
 -----END PGP SIGNATURE-----

Merge tag 'perf_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf fixes from Borislav Petkov:

 - Prevent unintentional page sharing by checking whether a page
   reference to a PMU samples page has been acquired properly before
   that

 - Make sure the LBR_SELECT MSR is saved/restored too

 - Reset the LBR_SELECT MSR when resetting the LBR PMU to clear any
   residual data left

* tag 'perf_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Avoid put_page() when GUP fails
  perf/x86/vlbr: Add c->flags to vlbr event constraints
  perf/x86/lbr: Reset LBR_SELECT during vlbr reset
2021-11-14 09:33:12 -08:00
Linus Torvalds
1654e95ee3 - Add the model number of a new, Raptor Lake CPU, to intel-family.h
- Do not log spurious corrected MCEs on SKL too, due to an erratum
 
 - Clarify the path of paravirt ops patches upstream
 
 - Add an optimization to avoid writing out AMX components to sigframes
 when former are in init state
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmGQ3CgACgkQEsHwGGHe
 VUoLAA/+NXRvcBHYkLaByT9f4OI6B79HzyguIBSfipYiw8ir0H7uEdV5FUCCUgCz
 egBRVFpOsXWt1teeuu6ViO+WBHncUxG/ryZ0ka35lri/3kuVYnugZExWDs4MrGR5
 vehRXehOxYNRaYc3oLYjubSbxqF1nWz3WWfGfhiBKk0jT/S1T9tX6lsRXlKsJCgj
 M4x5aqBWP8HTbFQfqjdHwagNitmSKzgjZvMcC4UWcql33ZCycbjvRdrAzBtw7WRI
 UBvgxWVmeMoagu5fqEOoph1oSoFxWuFrweFUjnxJmT6uZrTsfF7BVgXkxdG6eYUy
 2Xogcd4bPDBiRgbs0vPEog1tyyrKHOQ6p1pvksySKMPq6ULcSZ6hBpEZRpgr6Y9u
 0jB3P6weQgCckx5Hd+iwvX1a+GvEuHSEqAE+j160wFyrsBS5Cir3P1WqthWaPd5I
 3nH3h955PokUHPUioUhdf+8cfuP6h6K0nz1gdYI8GR8+fJHhEceT+pLLeyIxj/VM
 yr+bq+V7D6Cg62w3z3s9Dzg2XKpxStu1R9L1N/K8MtIGf6Uc7paL6xR27XxhmBp5
 Y6bGZw0mxxFhp6AEsFWo3rwLL9Dl5DmFcfgUHHpPK5VP0pVWp48Uapx2Hi2/JzAo
 c1o4UkPQa/EZJBPTklmGkS1JNp/2TsEL4Fw7sew+j7DWtsJpCfk=
 =Ge2T
 -----END PGP SIGNATURE-----

Merge tag 'x86_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

 - Add the model number of a new, Raptor Lake CPU, to intel-family.h

 - Do not log spurious corrected MCEs on SKL too, due to an erratum

 - Clarify the path of paravirt ops patches upstream

 - Add an optimization to avoid writing out AMX components to sigframes
   when former are in init state

* tag 'x86_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Add Raptor Lake to Intel family
  x86/mce: Add errata workaround for Skylake SKX37
  MAINTAINERS: Add some information to PARAVIRT_OPS entry
  x86/fpu: Optimize out sigframe xfeatures when in init state
2021-11-14 09:29:03 -08:00