Fixes the following W=1 kernel build warning(s):
drivers/net/ethernet/arc/emac_rockchip.c:18: warning: expecting prototype for emac(). Prototype was for DRV_NAME() instead
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
On some host, a crash could be triggered simply by repeating these
commands several times:
# modprobe tipc
# tipc bearer enable media udp name UDP1 localip 127.0.0.1
# rmmod tipc
[] BUG: unable to handle kernel paging request at ffffffffc096bb00
[] Workqueue: events 0xffffffffc096bb00
[] Call Trace:
[] ? process_one_work+0x1a7/0x360
[] ? worker_thread+0x30/0x390
[] ? create_worker+0x1a0/0x1a0
[] ? kthread+0x116/0x130
[] ? kthread_flush_work_fn+0x10/0x10
[] ? ret_from_fork+0x35/0x40
When removing the TIPC module, the UDP tunnel sock will be delayed to
release in a work queue as sock_release() can't be done in rtnl_lock().
If the work queue is schedule to run after the TIPC module is removed,
kernel will crash as the work queue function cleanup_beareri() code no
longer exists when trying to invoke it.
To fix it, this patch introduce a member wq_count in tipc_net to track
the numbers of work queues in schedule, and wait and exit until all
work queues are done in tipc_exit_net().
Fixes: d0f91938be ("tipc: add ip/udp media type")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mld_newpack() doesn't allow to allocate high order page,
only order-0 allocation is allowed.
If headroom size is too large, a kernel panic could occur in skb_put().
Test commands:
ip netns del A
ip netns del B
ip netns add A
ip netns add B
ip link add veth0 type veth peer name veth1
ip link set veth0 netns A
ip link set veth1 netns B
ip netns exec A ip link set lo up
ip netns exec A ip link set veth0 up
ip netns exec A ip -6 a a 2001:db8:0::1/64 dev veth0
ip netns exec B ip link set lo up
ip netns exec B ip link set veth1 up
ip netns exec B ip -6 a a 2001:db8:0::2/64 dev veth1
for i in {1..99}
do
let A=$i-1
ip netns exec A ip link add ip6gre$i type ip6gre \
local 2001:db8:$A::1 remote 2001:db8:$A::2 encaplimit 100
ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev ip6gre$i
ip netns exec A ip link set ip6gre$i up
ip netns exec B ip link add ip6gre$i type ip6gre \
local 2001:db8:$A::2 remote 2001:db8:$A::1 encaplimit 100
ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev ip6gre$i
ip netns exec B ip link set ip6gre$i up
done
Splat looks like:
kernel BUG at net/core/skbuff.c:110!
invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.12.0+ #891
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:skb_panic+0x15d/0x15f
Code: 92 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 00 ae 79 83
41 57 41 56 41 55 48 8b 54 24 a6 26 f9 ff <0f> 0b 48 8b 6c 24 20 89
34 24 e8 4a 4e 92 fe 8b 34 24 48 c7 c1 20
RSP: 0018:ffff88810091f820 EFLAGS: 00010282
RAX: 0000000000000089 RBX: ffff8881086e9000 RCX: 0000000000000000
RDX: 0000000000000089 RSI: 0000000000000008 RDI: ffffed1020123efb
RBP: ffff888005f6eac0 R08: ffffed1022fc0031 R09: ffffed1022fc0031
R10: ffff888117e00187 R11: ffffed1022fc0030 R12: 0000000000000028
R13: ffff888008284eb0 R14: 0000000000000ed8 R15: 0000000000000ec0
FS: 0000000000000000(0000) GS:ffff888117c00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8b801c5640 CR3: 0000000033c2c006 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600
? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600
skb_put.cold.104+0x22/0x22
ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600
? rcu_read_lock_sched_held+0x91/0xc0
mld_newpack+0x398/0x8f0
? ip6_mc_hdr.isra.26.constprop.46+0x600/0x600
? lock_contended+0xc40/0xc40
add_grhead.isra.33+0x280/0x380
add_grec+0x5ca/0xff0
? mld_sendpack+0xf40/0xf40
? lock_downgrade+0x690/0x690
mld_send_initial_cr.part.34+0xb9/0x180
ipv6_mc_dad_complete+0x15d/0x1b0
addrconf_dad_completed+0x8d2/0xbb0
? lock_downgrade+0x690/0x690
? addrconf_rs_timer+0x660/0x660
? addrconf_dad_work+0x73c/0x10e0
addrconf_dad_work+0x73c/0x10e0
Allowing high order page allocation could fix this problem.
Fixes: 72e09ad107 ("ipv6: avoid high order allocations")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove own module name definition and use KBUILD_MODNAME instead.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan says:
====================
bnxt_en: 2 bug fixes.
The first one fixes a bug to properly identify some recently added HyperV
device IDs. The second one fixes device context memory set up on systems
with 64K page size.
Please queue these for -stable as well. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There was a typo in the code that checks for 64K BNXT_PAGE_SHIFT in
bnxt_hwrm_set_pg_attr(). Fix it and make the code more understandable
with a new macro BNXT_SET_CTX_PAGE_ATTR().
Fixes: 1b9394e5a2 ("bnxt_en: Configure context memory on new devices.")
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Otherwise, some of the recently added HyperV VF IDs would not be
recognized as VF devices and they would not initialize properly.
Fixes: 7fbf359bb2 ("bnxt_en: Add PCI IDs for Hyper-V VF devices.")
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix to return -EPERM from the error handling case instead of 0, as done
elsewhere in this function.
Fixes: b6016b7673 ("[BNX2]: New Broadcom gigabit network driver.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In current kernels, small allocations never actually fail so this
patch shouldn't affect runtime.
Originally this error handling code written with the idea that if
the "serial->tiocmget" allocation failed, then we would continue
operating instead of bailing out early. But in later years we added
an unchecked dereference on the next line.
serial->tiocmget->serial_state_notification = kzalloc();
^^^^^^^^^^^^^^^^^^
Since these allocations are never going fail in real life, this is
mostly a philosophical debate, but I think bailing out early is the
correct behavior that the user would want. And generally it's safer to
bail as soon an error happens.
Fixes: af0de1303c ("usb: hso: obey DMA rules in tiocmget")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Seth David Schoen says:
====================
Treat IPv4 lowest address as ordinary unicast address
Treat the lowest address in a subnet (the address within the subnet
which contains all 0 bits) as an ordinary unicast address instead
of as a potential second broadcast address. For example, in subnet
192.168.17.24/29, which contains 8 addresses, make address 192.168.17.24
usable as a normal unicast address (while continuing to support
192.168.17.31 as a broadcast address).
Since EVERY network number or subnet formerly had its host number 0
reserved, this patchset adds 1 more usable host address to every network
and subnet (i.e., 2^(32-n)-1 instead of 2^(32-n)-2 addresses available
for assignment on each IPv4 /n subnet). For small subnets, this is a
significant gain; instead of 6 usable host addresses, a /29 would now
contain 7, a 16% increase.
The reserving of host number 0 for broadcast came about in RFC 1122 from
1989 (page 31, "IP addresses are not permitted to have the value 0 or -1
for any of the <Host-number>, <Network-number>, or <Subnet-number>
fields (except in the special cases listed above)" and page 66, "There
is a class of hosts [4.2BSD Unix and its derivatives, but not 4.3BSD]
that use non-standard broadcast address forms, substituting 0 for -1.
All hosts SHOULD recognize and accept any of these non-standard
broadcast addresses as the destination address of an incoming
datagram."). This has been repeated in subsequent RFCs, always with
backwards-compatibility rationales. Network troubles (broadcast storms)
ensued when some early hosts on a LAN treated the lowest address as
unicast and others treated it as broadcast. Multiple 1989 changes to IP
successfully prevented these. The key was adding the layering violation
rule requiring hosts to ignore all IP datagrams with unicast destination
addresses that were received in low-level (Ethernet) broadcasts. That
change is still in effect, and this patchset does not alter it. All
operating systems since 4.3BSD, including all the current BSD OSes, now
use the standard IP broadcast address. 4.2BSD has been obsolete for
more than 30 years, and all modern hosts ignore hardware broadcasts
containing unicast IP addresses, so there is no modern likelihood of
broadcast storms even when hosts disagree on the unicast vs. broadcast
status of a given address.
Tests with this patchset show that other Linux hosts on the local segment
simply ignore a host numbered with the lowest address, both for incoming
and outgoing packet purposes. They don't interoperate with it, but they
also don't cause broadcast storms or any other malfunction. If patched,
they have no trouble interoperating with a host at the lowest address.
Unmodified "distant" hosts that are not on the same segment successfully
interoperate, as long as the gateway on the local segment, and the local
host itself using the lowest address, have this patch. (Distant hosts
have no way of knowing whether a given address is the lowest address
in a faraway network segment, so they treat it no differently than any
other unicast address.) This means that each local site can change this
behavior locally, resulting immediately in global interoperability with
the newly usable lowest local address.
Modern software and documentation continues to use the definition of the
directed, or "net-directed", broadcast address as "a host ID of all one
bits". The Internet no longer gets any benefit from having two different
broadcast addresses usable on every Ethernet segment. I have not been
able to find any documentation that suggests that users or software should
ever intentionally use the all-zero form, or that justifies it other than
as a historic Berkeleyism. RFCs 1112, 1812, and 3021 state that hosts and
routers need to maintain compatibility with the old form -- but they give
no rationale other than the past existence of the 4.2BSD behavior.
We're happy to provide more historical details or information about
behavior of other systems in this regard by e-mail or as future patches
to kernel documentation files.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Expect the lowest IPv4 address in a subnet to be assignable
and addressable as a unicast (non-broadcast) address on a
local network segment.
Signed-off-by: Seth David Schoen <schoen@loyalty.org>
Suggested-by: John Gilmore <gnu@toad.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Treat only the highest, not the lowest, IPv4 address within a local
subnet as a broadcast address.
Signed-off-by: Seth David Schoen <schoen@loyalty.org>
Suggested-by: John Gilmore <gnu@toad.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's not a good idea to append the frag skb to a skb's frag_list if
the frag_list already has skbs from elsewhere, such as this skb was
created by pskb_copy() where the frag_list was cloned (all the skbs
in it were skb_get'ed) and shared by multiple skbs.
However, the new appended frag skb should have been only seen by the
current skb. Otherwise, it will cause use after free crashes as this
appended frag skb are seen by multiple skbs but it only got skb_get
called once.
The same thing happens with a skb updated by pskb_may_pull() with a
skb_cloned skb. Li Shuang has reported quite a few crashes caused
by this when doing testing over macvlan devices:
[] kernel BUG at net/core/skbuff.c:1970!
[] Call Trace:
[] skb_clone+0x4d/0xb0
[] macvlan_broadcast+0xd8/0x160 [macvlan]
[] macvlan_process_broadcast+0x148/0x150 [macvlan]
[] process_one_work+0x1a7/0x360
[] worker_thread+0x30/0x390
[] kernel BUG at mm/usercopy.c:102!
[] Call Trace:
[] __check_heap_object+0xd3/0x100
[] __check_object_size+0xff/0x16b
[] simple_copy_to_iter+0x1c/0x30
[] __skb_datagram_iter+0x7d/0x310
[] __skb_datagram_iter+0x2a5/0x310
[] skb_copy_datagram_iter+0x3b/0x90
[] tipc_recvmsg+0x14a/0x3a0 [tipc]
[] ____sys_recvmsg+0x91/0x150
[] ___sys_recvmsg+0x7b/0xc0
[] kernel BUG at mm/slub.c:305!
[] Call Trace:
[] <IRQ>
[] kmem_cache_free+0x3ff/0x400
[] __netif_receive_skb_core+0x12c/0xc40
[] ? kmem_cache_alloc+0x12e/0x270
[] netif_receive_skb_internal+0x3d/0xb0
[] ? get_rx_page_info+0x8e/0xa0 [be2net]
[] be_poll+0x6ef/0xd00 [be2net]
[] ? irq_exit+0x4f/0x100
[] net_rx_action+0x149/0x3b0
...
This patch is to fix it by linearizing the head skb if it has frag_list
set in tipc_buf_append(). Note that we choose to do this before calling
skb_unshare(), as __skb_linearize() will avoid skb_copy(). Also, we can
not just drop the frag_list either as the early time.
Fixes: 45c8b7b175 ("tipc: allow non-linear first fragment buffer")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix PXA Mainstone CPLD irq allocation in legacy mode
- Restrict the Apple AIC controller to the Apple platform
- Remove a few supperfluous messages on devm_ioremap_resource() failure
-----BEGIN PGP SIGNATURE-----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=iLd3
-----END PGP SIGNATURE-----
Merge tag 'irqchip-fixes-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- Fix PXA Mainstone CPLD irq allocation in legacy mode
- Restrict the Apple AIC controller to the Apple platform
- Remove a few supperfluous messages on devm_ioremap_resource() failure
Link: https://lore.kernel.org/r/20210516122217.13234-1-maz@kernel.org
-----BEGIN PGP SIGNATURE-----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=ue6o
-----END PGP SIGNATURE-----
Merge tag 'for-5.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes:
- fix fiemap to print extents that could get misreported due to
internal extent splitting and logical merging for fiemap output
- fix RCU stalls during delayed iputs
- fix removed dentries still existing after log is synced"
* tag 'for-5.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix removed dentries still existing after log is synced
btrfs: return whole extents in fiemap
btrfs: avoid RCU stalls while running delayed iputs
btrfs: return 0 for dev_extent_hole_check_zoned hole_start in case of error
When there is fatal event on the slave port, the device is marked as not
active. We need to mark it as active again when the slave is recovered to
regain full functionality.
Fixes: d69a24e036 ("IB/mlx5: Move IB event processing onto a workqueue")
Link: https://lore.kernel.org/r/8906754455bb23019ef223c725d2c0d38acfb80b.1620711734.git.leonro@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix the complaint from smatch by verifing that the user requested DM
operation is not greater than 31.
divers/infiniband/hw/mlx5/dm.c:220 mlx5_ib_handler_MLX5_IB_METHOD_DM_MAP_OP_ADDR()
error: undefined (user controlled) shift '(((1))) << op'
Fixes: cea85fa5db ("RDMA/mlx5: Add support in MEMIC operations")
Link: https://lore.kernel.org/r/458b1d7710c3cf01360c8771893f483665569786.1620711734.git.leonro@nvidia.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This adds functions that wrap the netlink API used for adding, manipulating,
and removing traffic control filters.
The API summary:
A bpf_tc_hook represents a location where a TC-BPF filter can be attached.
This means that creating a hook leads to creation of the backing qdisc,
while destruction either removes all filters attached to a hook, or destroys
qdisc if requested explicitly (as discussed below).
The TC-BPF API functions operate on this bpf_tc_hook to attach, replace,
query, and detach tc filters. All functions return 0 on success, and a
negative error code on failure.
bpf_tc_hook_create - Create a hook
Parameters:
@hook - Cannot be NULL, ifindex > 0, attach_point must be set to
proper enum constant. Note that parent must be unset when
attach_point is one of BPF_TC_INGRESS or BPF_TC_EGRESS. Note
that as an exception BPF_TC_INGRESS|BPF_TC_EGRESS is also a
valid value for attach_point.
Returns -EOPNOTSUPP when hook has attach_point as BPF_TC_CUSTOM.
bpf_tc_hook_destroy - Destroy a hook
Parameters:
@hook - Cannot be NULL. The behaviour depends on value of
attach_point. If BPF_TC_INGRESS, all filters attached to
the ingress hook will be detached. If BPF_TC_EGRESS, all
filters attached to the egress hook will be detached. If
BPF_TC_INGRESS|BPF_TC_EGRESS, the clsact qdisc will be
deleted, also detaching all filters. As before, parent must
be unset for these attach_points, and set for BPF_TC_CUSTOM.
It is advised that if the qdisc is operated on by many programs,
then the program at least check that there are no other existing
filters before deleting the clsact qdisc. An example is shown
below:
DECLARE_LIBBPF_OPTS(bpf_tc_hook, .ifindex = if_nametoindex("lo"),
.attach_point = BPF_TC_INGRESS);
/* set opts as NULL, as we're not really interested in
* getting any info for a particular filter, but just
* detecting its presence.
*/
r = bpf_tc_query(&hook, NULL);
if (r == -ENOENT) {
/* no filters */
hook.attach_point = BPF_TC_INGRESS|BPF_TC_EGREESS;
return bpf_tc_hook_destroy(&hook);
} else {
/* failed or r == 0, the latter means filters do exist */
return r;
}
Note that there is a small race between checking for no
filters and deleting the qdisc. This is currently unavoidable.
Returns -EOPNOTSUPP when hook has attach_point as BPF_TC_CUSTOM.
bpf_tc_attach - Attach a filter to a hook
Parameters:
@hook - Cannot be NULL. Represents the hook the filter will be
attached to. Requirements for ifindex and attach_point are
same as described in bpf_tc_hook_create, but BPF_TC_CUSTOM
is also supported. In that case, parent must be set to the
handle where the filter will be attached (using BPF_TC_PARENT).
E.g. to set parent to 1:16 like in tc command line, the
equivalent would be BPF_TC_PARENT(1, 16).
@opts - Cannot be NULL. The following opts are optional:
* handle - The handle of the filter
* priority - The priority of the filter
Must be >= 0 and <= UINT16_MAX
Note that when left unset, they will be auto-allocated by
the kernel. The following opts must be set:
* prog_fd - The fd of the loaded SCHED_CLS prog
The following opts must be unset:
* prog_id - The ID of the BPF prog
The following opts are optional:
* flags - Currently only BPF_TC_F_REPLACE is allowed. It
allows replacing an existing filter instead of
failing with -EEXIST.
The following opts will be filled by bpf_tc_attach on a
successful attach operation if they are unset:
* handle - The handle of the attached filter
* priority - The priority of the attached filter
* prog_id - The ID of the attached SCHED_CLS prog
This way, the user can know what the auto allocated values
for optional opts like handle and priority are for the newly
attached filter, if they were unset.
Note that some other attributes are set to fixed default
values listed below (this holds for all bpf_tc_* APIs):
protocol as ETH_P_ALL, direct action mode, chain index of 0,
and class ID of 0 (this can be set by writing to the
skb->tc_classid field from the BPF program).
bpf_tc_detach
Parameters:
@hook - Cannot be NULL. Represents the hook the filter will be
detached from. Requirements are same as described above
in bpf_tc_attach.
@opts - Cannot be NULL. The following opts must be set:
* handle, priority
The following opts must be unset:
* prog_fd, prog_id, flags
bpf_tc_query
Parameters:
@hook - Cannot be NULL. Represents the hook where the filter lookup will
be performed. Requirements are same as described above in
bpf_tc_attach().
@opts - Cannot be NULL. The following opts must be set:
* handle, priority
The following opts must be unset:
* prog_fd, prog_id, flags
The following fields will be filled by bpf_tc_query upon a
successful lookup:
* prog_id
Some usage examples (using BPF skeleton infrastructure):
BPF program (test_tc_bpf.c):
#include <linux/bpf.h>
#include <bpf/bpf_helpers.h>
SEC("classifier")
int cls(struct __sk_buff *skb)
{
return 0;
}
Userspace loader:
struct test_tc_bpf *skel = NULL;
int fd, r;
skel = test_tc_bpf__open_and_load();
if (!skel)
return -ENOMEM;
fd = bpf_program__fd(skel->progs.cls);
DECLARE_LIBBPF_OPTS(bpf_tc_hook, hook, .ifindex =
if_nametoindex("lo"), .attach_point =
BPF_TC_INGRESS);
/* Create clsact qdisc */
r = bpf_tc_hook_create(&hook);
if (r < 0)
goto end;
DECLARE_LIBBPF_OPTS(bpf_tc_opts, opts, .prog_fd = fd);
r = bpf_tc_attach(&hook, &opts);
if (r < 0)
goto end;
/* Print the auto allocated handle and priority */
printf("Handle=%u", opts.handle);
printf("Priority=%u", opts.priority);
opts.prog_fd = opts.prog_id = 0;
bpf_tc_detach(&hook, &opts);
end:
test_tc_bpf__destroy(skel);
This is equivalent to doing the following using tc command line:
# tc qdisc add dev lo clsact
# tc filter add dev lo ingress bpf obj foo.o sec classifier da
# tc filter del dev lo ingress handle <h> prio <p> bpf
... where the handle and priority can be found using:
# tc filter show dev lo ingress
Another example replacing a filter (extending prior example):
/* We can also choose both (or one), let's try replacing an
* existing filter.
*/
DECLARE_LIBBPF_OPTS(bpf_tc_opts, replace_opts, .handle =
opts.handle, .priority = opts.priority,
.prog_fd = fd);
r = bpf_tc_attach(&hook, &replace_opts);
if (r == -EEXIST) {
/* Expected, now use BPF_TC_F_REPLACE to replace it */
replace_opts.flags = BPF_TC_F_REPLACE;
return bpf_tc_attach(&hook, &replace_opts);
} else if (r < 0) {
return r;
}
/* There must be no existing filter with these
* attributes, so cleanup and return an error.
*/
replace_opts.prog_fd = replace_opts.prog_id = 0;
bpf_tc_detach(&hook, &replace_opts);
return -1;
To obtain info of a particular filter:
/* Find info for filter with handle 1 and priority 50 */
DECLARE_LIBBPF_OPTS(bpf_tc_opts, info_opts, .handle = 1,
.priority = 50);
r = bpf_tc_query(&hook, &info_opts);
if (r == -ENOENT)
printf("Filter not found");
else if (r < 0)
return r;
printf("Prog ID: %u", info_opts.prog_id);
return 0;
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net> # libbpf API design
[ Daniel: also did major patch cleanup ]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210512103451.989420-3-memxor@gmail.com
This change introduces a few helpers to wrap open coded attribute
preparation in netlink.c. It also adds a libbpf_netlink_send_recv() that
is useful to wrap send + recv handling in a generic way. Subsequent patch
will also use this function for sending and receiving a netlink response.
The libbpf_nl_get_link() helper has been removed instead, moving socket
creation into the newly named libbpf_netlink_send_recv().
Every nested attribute's closure must happen using the helper
nlattr_end_nested(), which sets its length properly. NLA_F_NESTED is
enforced using nlattr_begin_nested() helper. Other simple attributes
can be added directly.
The maxsz parameter corresponds to the size of the request structure
which is being filled in, so for instance with req being:
struct {
struct nlmsghdr nh;
struct tcmsg t;
char buf[4096];
} req;
Then, maxsz should be sizeof(req).
This change also converts the open coded attribute preparation with these
helpers. Note that the only failure the internal call to nlattr_add()
could result in the nested helper would be -EMSGSIZE, hence that is what
we return to our caller.
The libbpf_netlink_send_recv() call takes care of opening the socket,
sending the netlink message, receiving the response, potentially invoking
callbacks, and return errors if any, and then finally close the socket.
This allows users to avoid identical socket setup code in different places.
The only user of libbpf_nl_get_link() has been converted to make use of it.
__bpf_set_link_xdp_fd_replace() has also been refactored to use it.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
[ Daniel: major patch cleanup ]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210512103451.989420-2-memxor@gmail.com
Add Neil as primary maintainer for the Amlogic family of Arm SoCs. I
will now act as co-maintainer.
Neil is already doing lots of the reviewing, testing and behind the
scenes support for users of the upstream kernel on these SoCs, so this
is just to formalize the current state of affairs.
Thanks Neil for all of your efforts, and keep up the great work!
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210511190054.26300-1-khilman@baylibre.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In commit fa8b90070a ("quota: wire up quotactl_path") we have wired up
new quotactl_path syscall. However some people in LWN discussion have
objected that the path based syscall is missing dirfd and flags argument
which is mostly standard for contemporary path based syscalls. Indeed
they have a point and after a discussion with Christian Brauner and
Sascha Hauer I've decided to disable the syscall for now and update its
API. Since there is no userspace currently using that syscall and it
hasn't been released in any major release, we should be fine.
CC: Christian Brauner <christian.brauner@ubuntu.com>
CC: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/lkml/20210512153621.n5u43jsytbik4yze@wittgenstein
Signed-off-by: Jan Kara <jack@suse.cz>
When devm_ioremap_resource() fails, a clear enough error message will be
printed by its subfunction __devm_ioremap_resource(). The error
information contains the device name, failure cause, and possibly resource
information.
Therefore, remove the error printing here to simplify code and reduce the
binary size.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
When devm_ioremap_resource() fails, a clear enough error message will be
printed by its subfunction __devm_ioremap_resource(). The error
information contains the device name, failure cause, and possibly resource
information.
Therefore, remove the error printing here to simplify code and reduce the
binary size.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Correct the kerneldoc of fimd_shadow_protect_win() to fix W=1 warnings:
drivers/gpu/drm/exynos/exynos_drm_fimd.c:734: warning:
expecting prototype for shadow_protect_win(). Prototype was for fimd_shadow_protect_win() instead
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
As kvmgt module contains all handling for VFIO/mdev, leaving mdev attribute
groups in gvt module caused dependency issue. Although it was there for possible
other hypervisor usage, that turns out never to be true. So this moves all mdev
handling into kvmgt module completely to resolve dependency issue.
With this fix, no config workaround is required. So revert previous workaround
commits: adaeb718d4 ("vfio/gvt: fix DRM_I915_GVT dependency on VFIO_MDEV")
and 07e543f4f9 ("vfio/gvt: Make DRM_I915_GVT depend on VFIO_MDEV").
Reviewed-by: Colin Xu <colin.xu@intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210513083902.2822350-1-zhenyuw@linux.intel.com
Previously, when CONFIG_MODULE_UNLOAD=n, the module loader just does not
attempt to load exit sections since it never expects that any code in those
sections will ever execute. However, dynamic code patching (alternatives,
jump_label and static_call) can have sites in __exit code, even if __exit is
never executed. Therefore __exit must be present at runtime, at least for as
long as __init code is.
Commit 33121347fb ("module: treat exit sections the same as init
sections when !CONFIG_MODULE_UNLOAD") solves the requirements of
jump_labels and static_calls by putting the exit sections in the init
region of the module so that they are at least present at init, and
discarded afterwards. It does this by including a check for exit
sections in module_init_section(), so that it also returns true for exit
sections, and the module loader will automatically sort them in the init
region of the module.
However, the solution there was not completely arch-independent. ARM is
a special case where it supplies its own module_{init, exit}_section()
functions. Instead of pushing the exit section checks into
module_init_section(), just implement the exit section check in
layout_sections(), so that we don't have to touch arch-dependent code.
Fixes: 33121347fb ("module: treat exit sections the same as init sections when !CONFIG_MODULE_UNLOAD")
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Deadstore detected by Lukas Bulwahn's CodeChecker Tool (ELISA group).
line 741 struct cifsInodeInfo *cinode;
line 747 cinode = CIFS_I(d_inode(cfile->dentry));
could be deleted.
cinode on filesystem should not be deleted when files are closed,
they are representations of some data fields on a physical disk,
thus no further action is required.
The virtual inode on vfs will be handled by vfs automatically,
and the denotation is inode, which is different from the cinode.
Signed-off-by: wenhuizhang <wenhui@gwmail.gwu.edu>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit 3fb0fdb3bb ("x86/stackprotector/32: Make the canary into a regular
percpu variable") modified the stackprotector check on 32-bit x86 to check
if gcc supports using %fs as canary. Adjust dummy-tools gcc script to pass
this new test by returning "%fs" rather than "%gs" if it detects
-mstack-protector-guard-reg=fs on command line.
Fixes: 3fb0fdb3bb ("x86/stackprotector/32: Make the canary into a regular percpu variable")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The tools quiet cmd output has mismatched indentation (and extra space
character between cmd name and target name) compared to the rest of
kbuild out:
HOSTCC scripts/insert-sys-cert
LD /srv/code/tools/objtool/arch/x86/objtool-in.o
LD /srv/code/tools/objtool/libsubcmd-in.o
AR /srv/code/tools/objtool/libsubcmd.a
HOSTLD scripts/genksyms/genksyms
CC scripts/mod/empty.o
HOSTCC scripts/mod/mk_elfconfig
CC scripts/mod/devicetable-offsets.s
MKELF scripts/mod/elfconfig.h
HOSTCC scripts/mod/modpost.o
HOSTCC scripts/mod/file2alias.o
HOSTCC scripts/mod/sumversion.o
LD /srv/code/tools/objtool/objtool-in.o
LINK /srv/code/tools/objtool/objtool
HOSTLD scripts/mod/modpost
CC kernel/bounds.s
Adjust to match the rest of kbuild.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
xfs_bmap_rtalloc doesn't handle realtime extent files with extent size
hints larger than the rt volume's extent size properly, because
xfs_bmap_extsize_align can adjust the offset/length parameters to try to
fit the extent size hint.
Under these conditions, minlen has to be large enough so that any
allocation returned by xfs_rtallocate_extent will be large enough to
cover at least one of the blocks that the caller asked for. If the
allocation is too short, bmapi_write will return no mapping for the
requested range, which causes ENOSPC errors in other parts of the
filesystem.
Therefore, adjust minlen upwards to fix this. This can be found by
running generic/263 (g/127 or g/522) with a realtime extent size hint
that's larger than the rt volume extent size.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Here are 2 driver fixes for driver core changes that happened in
5.13-rc1.
The clk driver fix resolves a many-reported issue with booting some
devices, and the USB typec fix resolves the reported problem of USB
systems on some embedded boards.
Both of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYKDc2A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylF8QCeIeAZ24HKyzGiS2CPYHEHBdiip40An1eefar7
WvvZuHQCZV3gfVEHdVpp
=jCwI
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two driver fixes for driver core changes that happened in
5.13-rc1.
The clk driver fix resolves a many-reported issue with booting some
devices, and the USB typec fix resolves the reported problem of USB
systems on some embedded boards.
Both of these have been in linux-next this week with no reported
issues"
* tag 'driver-core-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
clk: Skip clk provider registration when np is NULL
usb: typec: tcpm: Don't block probing of consumers of "connector" nodes
Here are some small IIO driver fixes and one Staging driver fix for
5.13-rc2.
Nothing major, just some resolutions for reported problems:
- gcc11 bogus warning fix for rtl8723bs
- iio driver tiny fixes
All of these have been in linux-next for many days with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYKDcQA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk8hQCg0+YRIUZfhBm1qUiq9JuTBr62kM8An2qYpr9Q
8iiAoBETOYo5P5HByG52
=Dyx9
-----END PGP SIGNATURE-----
Merge tag 'staging-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver fixes from Greg KH:
"Here are some small IIO driver fixes and one Staging driver fix for
5.13-rc2.
Nothing major, just some resolutions for reported problems:
- gcc-11 bogus warning fix for rtl8723bs
- iio driver tiny fixes
All of these have been in linux-next for many days with no reported
issues"
* tag 'staging-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: tsl2583: Fix division by a zero lux_val
iio: core: return ENODEV if ioctl is unknown
iio: core: fix ioctl handlers removal
iio: gyro: mpu3050: Fix reported temperature value
iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER
iio: proximity: pulsedlight: Fix rumtime PM imbalance on error
iio: light: gp2ap002: Fix rumtime PM imbalance on error
staging: rtl8723bs: avoid bogus gcc warning
Here are some small USB fixes for 5.13-rc2. They consist of a number of
resolutions for reported issues:
- typec fixes for found problems
- xhci fixes and quirk additions
- dwc3 driver fixes
- minor fixes found by Coverity
- cdc-wdm fixes for reported problems
All of these have been in linux-next for a few days with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYKDexQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk72gCffEE5ZfO64iFqARPx9Mim04YaSDUAnRJM1mBk
dsRT2X0yddqdKek6fN+g
=C9x7
-----END PGP SIGNATURE-----
Merge tag 'usb-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.13-rc2. They consist of a number
of resolutions for reported issues:
- typec fixes for found problems
- xhci fixes and quirk additions
- dwc3 driver fixes
- minor fixes found by Coverity
- cdc-wdm fixes for reported problems
All of these have been in linux-next for a few days with no reported
issues"
* tag 'usb-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
usb: core: hub: fix race condition about TRSMRCY of resume
usb: typec: tcpm: Fix SINK_DISCOVERY current limit for Rp-default
xhci: Add reset resume quirk for AMD xhci controller.
usb: xhci: Increase timeout for HC halt
xhci: Do not use GFP_KERNEL in (potentially) atomic context
xhci: Fix giving back cancelled URBs even if halted endpoint can't reset
xhci-pci: Allow host runtime PM as default for Intel Alder Lake xHCI
usb: musb: Fix an error message
usb: typec: tcpm: Fix wrong handling for Not_Supported in VDM AMS
usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work
usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4
usb: fotg210-hcd: Fix an error message
docs: usb: function: Modify path name
usb: dwc3: omap: improve extcon initialization
usb: typec: ucsi: Put fwnode in any case during ->probe()
usb: typec: tcpm: Fix wrong handling in GET_SINK_CAP
usb: dwc2: Remove obsolete MODULE_ constants from platform.c
usb: dwc3: imx8mp: fix error return code in dwc3_imx8mp_probe()
usb: dwc3: imx8mp: detect dwc3 core node via compatible string
usb: dwc3: gadget: Return success always for kick transfer in ep queue
...
- Use the ALARM feature check in the alarmtimer core code insted of
the old method of checking for the set_alarm() callback. Drivers
can have that callback set but the feature bit cleared. If such
a RTC device is selected then alarms wont work.
- Use a proper define to let the preprocessor check whether Hyper-V VDSO
clocksource should be active. The code used a constant in an enum with
#ifdef, which evaluates to always false and disabled the clocksource
for VDSO.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmChLI8THHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoUJMD/wOQ/R7jXe/EWti3+w11TATvkP+ZzDv
LcAfZ/ZP8wgrUTbjLqTTyeOFoI9q39emnq3FvCoRsF+rdHRbnZNAB3kWQmh/i1tL
j8BuGogzvVLkBmriQIzVxYgEroCZVySWkO27B7ToBq64IeI4IBVB4jQiJis614m7
5wTHKgN0MkAtWUmwDqkqycFDuWyZNPkR3Ht26zk46Lvk0dmIPh14zbVzezfFEtq4
9DBeGuLDLVtzaBNLWUvnpXL7wxuFB+E8euO5otbmgRNz7CXaE6e6zy6zspK2ahmp
FRq+nrG6yK6ucoFhGFABfKZCGorhh1ghhniPUXQKP9B29z146pN6TLFAVAutBk4z
RoRdyGb9npoO1pB0f2tl0U65TBBlMCnLnDB3hcQ/eyMG7AC8ABHalBIFUjzEPB4b
3eDa+ZxfkW8/oiSLTssQiJ6TJW1EQNaVja1TuHvtPi5RdasbS4LEkQnDaePQ3/nl
tDLekfsDF4KxetZehIlRDqyN9cqIHVphs3pTysyWR7+aOTduWWF58ZtgR7SvTCVu
7Zu+PhP06A1MtEugnwcAcpG5XYCsAXdZXinuQhPndXqazN4wMJkanXNk03z//JmQ
wG//lFAC+9EfA8i9RDr2DeE6JISD2g+jj2Di9bjjxelp5Mi0bNZ0zdIiww6EJjRg
v4F0vCp3By8SQg==
=TruV
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2021-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two fixes for timers:
- Use the ALARM feature check in the alarmtimer core code insted of
the old method of checking for the set_alarm() callback.
Drivers can have that callback set but the feature bit cleared. If
such a RTC device is selected then alarms wont work.
- Use a proper define to let the preprocessor check whether Hyper-V
VDSO clocksource should be active.
The code used a constant in an enum with #ifdef, which evaluates to
always false and disabled the clocksource for VDSO"
* tag 'timers-urgent-2021-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/hyper-v: Re-enable VDSO_CLOCKMODE_HVCLOCK on X86
alarmtimer: Check RTC features instead of ops
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYKC7SQAKCRCAXGG7T9hj
vpmTAQCmz5LvFHN9eAfq5jwz4cMvrN5h8aWnZjChgiAFZl0T7wD/TEDjtK18piUM
xWjZDUefMonnk0U8+bPityDmt8UV2AI=
=KFFw
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.13b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- two patches for error path fixes
- a small series for fixing a regression with swiotlb with Xen on Arm
* tag 'for-linus-5.13b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/swiotlb: check if the swiotlb has already been initialized
arm64: do not set SWIOTLB_NO_FORCE when swiotlb is required
xen/arm: move xen_swiotlb_detect to arm/swiotlb-xen.h
xen/unpopulated-alloc: fix error return code in fill_list()
xen/gntdev: fix gntdev_mmap() error exit path
- Reorganize SEV code to streamline and simplify future development
-----BEGIN PGP SIGNATURE-----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=ENfF
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"The three SEV commits are not really urgent material. But we figured
since getting them in now will avoid a huge amount of conflicts
between future SEV changes touching tip, the kvm and probably other
trees, sending them to you now would be best.
The idea is that the tip, kvm etc branches for 5.14 will all base
ontop of -rc2 and thus everything will be peachy. What is more, those
changes are purely mechanical and defines movement so they should be
fine to go now (famous last words).
Summary:
- Enable -Wundef for the compressed kernel build stage
- Reorganize SEV code to streamline and simplify future development"
* tag 'x86_urgent_for_v5.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/compressed: Enable -Wundef
x86/msr: Rename MSR_K8_SYSCFG to MSR_AMD64_SYSCFG
x86/sev: Move GHCB MSR protocol and NAE definitions in a common header
x86/sev-es: Rename sev-es.{ch} to sev.{ch}
The interrupt handler of intel8x0 calls snd_intel8x0_update() whenever
the hardware sets the corresponding status bit for each stream. This
works fine for most cases as long as the hardware behaves properly.
But when the hardware gives a wrong bit set, this leads to a zero-
division Oops, and reportedly, this seems what happened on a VM.
For fixing the crash, this patch adds a internal flag indicating that
the stream is ready to be updated, and check it (as well as the flag
being in suspended) to ignore such spurious update.
Cc: <stable@vger.kernel.org>
Reported-and-tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Link: https://lore.kernel.org/r/s5h5yzi7uh0.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When devm_ioremap_resource() fails, a clear enough error message will be
printed by its subfunction __devm_ioremap_resource(). The error
information contains the device name, failure cause, and possibly resource
information.
Therefore, remove the error printing here to simplify code and reduce the
binary size.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210511125428.6108-2-thunder.leizhen@huawei.com
- Fix a regression in the conversion of the 64-bit BookE interrupt entry to C.
- Fix KVM hosts running with the hash MMU since the recent KVM gfn changes.
- Fix a deadlock in our paravirt spinlocks when hcall tracing is enabled.
- Several fixes for oopses in our runtime code patching for security mitigations.
- A couple of minor fixes for the recent conversion of 32-bit interrupt entry/exit to C.
- Fix __get_user() causing spurious crashes in sigreturn due to a bad inline asm
constraint, spotted with GCC 11.
- A fix for the way we track IRQ masking state vs NMI interrupts when using the new scv
system call entry path.
- A couple more minor fixes.
Thanks to: Cédric Le Goater, Christian Zigotzky, Christophe Leroy, Naveen N. Rao, Nicholas
Piggin Paul Menzel, Sean Christopherson.
-----BEGIN PGP SIGNATURE-----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=V7PP
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a regression in the conversion of the 64-bit BookE interrupt
entry to C.
- Fix KVM hosts running with the hash MMU since the recent KVM gfn
changes.
- Fix a deadlock in our paravirt spinlocks when hcall tracing is
enabled.
- Several fixes for oopses in our runtime code patching for security
mitigations.
- A couple of minor fixes for the recent conversion of 32-bit interrupt
entry/exit to C.
- Fix __get_user() causing spurious crashes in sigreturn due to a bad
inline asm constraint, spotted with GCC 11.
- A fix for the way we track IRQ masking state vs NMI interrupts when
using the new scv system call entry path.
- A couple more minor fixes.
Thanks to Cédric Le Goater, Christian Zigotzky, Christophe Leroy,
Naveen N. Rao, Nicholas Piggin Paul Menzel, and Sean Christopherson.
* tag 'powerpc-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64e/interrupt: Fix nvgprs being clobbered
powerpc/64s: Make NMI record implicitly soft-masked code as irqs disabled
powerpc/64s: Fix stf mitigation patching w/strict RWX & hash
powerpc/64s: Fix entry flush patching w/strict RWX & hash
powerpc/64s: Fix crashes when toggling entry flush barrier
powerpc/64s: Fix crashes when toggling stf barrier
KVM: PPC: Book3S HV: Fix kvm_unmap_gfn_range_hv() for Hash MMU
powerpc/legacy_serial: Fix UBSAN: array-index-out-of-bounds
powerpc/signal: Fix possible build failure with unsafe_copy_fpr_{to/from}_user
powerpc/uaccess: Fix __get_user() with CONFIG_CC_HAS_ASM_GOTO_OUTPUT
powerpc/pseries: warn if recursing into the hcall tracing code
powerpc/pseries: use notrace hcall variant for H_CEDE idle
powerpc/pseries: Don't trace hcall tracing wrapper
powerpc/pseries: Fix hcall tracing recursion in pv queued spinlocks
powerpc/syscall: Calling kuap_save_and_lock() is wrong
powerpc/interrupts: Fix kuep_unlock() call
When driver is loaded after rmmod some drives are not showing up during
discovery.
SATA drives are directly attached to the controller connected phys. During
device discovery, the IDENTIFY command (qc timeout (cmd 0xec)) is timing out
during revalidation. This will trigger abort from host side and controller
successfully aborts the command and returns success. Post this successful
abort response ATA library decides to mark the disk as NODEV.
To overcome this, inside pm8001_scan_start() after phy_start() call, add get
start response and wait for few milliseconds to trigger next phy start.
This millisecond delay will give sufficient time for the controller state
machine to accept next phy start.
Link: https://lore.kernel.org/r/20210505120103.24497-1-ajish.koshy@microchip.com
Signed-off-by: Ajish Koshy <ajish.koshy@microchip.com>
Signed-off-by: Viswas G <viswas.g@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
