Remove .owner field if calls are used which set it automatically.
./drivers/net/ethernet/sunplus/spl2sw_driver.c:569:3-8: No need to set
.owner here. The core will do it.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently If use page pool allocation stats to analysis a RX performance
degradation problem. These stats only count for pages allocate from
page_pool_alloc_pages. But nic drivers such as hns3 use
page_pool_dev_alloc_frag to allocate pages, so page stats in this API
should also be counted.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clean the following coccicheck warning:
./drivers/net/ethernet/sunplus/spl2sw_driver.c:217:27-28: WARNING
opportunity for swap().
./drivers/net/ethernet/sunplus/spl2sw_driver.c:222:27-28: WARNING
opportunity for swap().
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Update the clock providers for PCIe host controller
- Update the clock providers for ethernet device
- Update the clock providers for SPI
- Update the clock providers for watchdog timer
- Update the clock providers for I2C
- Update the clock providers for UART
- Add clock controller support for TMPV7708
-----BEGIN PGP SIGNATURE-----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=DFRT
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=c0vE
-----END PGP SIGNATURE-----
Merge tag 'visconti-arm-dt-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti into arm/dt
Visconti device tree updates for 5.19
- Update the clock providers for PCIe host controller
- Update the clock providers for ethernet device
- Update the clock providers for SPI
- Update the clock providers for watchdog timer
- Update the clock providers for I2C
- Update the clock providers for UART
- Add clock controller support for TMPV7708
* tag 'visconti-arm-dt-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti:
arm64: dts: visconti: Update the clock providers for PCIe host controller
arm64: dts: visconti: Update the clock providers for ethernet device
arm64: dts: visconti: Update the clock providers for SPI
arm64: dts: visconti: Update the clock providers for watchdog timer
arm64: dts: visconti: Update the clock providers for I2C
arm64: dts: visconti: Update the clock providers for UART
arm64: dts: visconti: Add clock controller support for TMPV7708
Link: https://lore.kernel.org/r/TYWPR01MB94201E842A2F8E5E9EBF740D92C99@TYWPR01MB9420.jpnprd01.prod.outlook.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
For "st,stm32mp1-rcc-secure" schema, clocks and clock-names entries are now
required properties.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220511092559.4952-1-alexandre.torgue@foss.st.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Using an activation counter to decide when the enable or disable the
cec adapter is not the best approach and can lead to race conditions.
Change this to determining the current status of the adapter, and
enable or disable the adapter accordingly.
It now only needs to be called whenever there is a chance that the
state changes, and it can handle enabling/disabling monitoring as
well if needed.
This simplifies the code and it should be a more robust approach as well.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If the physical address changes (i.e. becomes invalid, then valid again)
while the adapter is still claiming free logical addresses, then trigger
a reconfiguration since any claimed LAs may now be stale.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If an adapter is trying to claim a free logical address then it is
in the 'is_configuring' state. If during that process the cable is
disconnected (HPD goes low, which in turn invalidates the physical
address), then cec_adap_unconfigure() is called, and that set the
is_configuring boolean to false, even though the thread that's
trying to claim an LA is still running.
Don't touch the is_configuring bool in cec_adap_unconfigure(), it
will eventually be cleared by the thread. By making that change
the cec_config_log_addr() function also had to change: it was
aborting if is_configuring became false (since that is what
cec_adap_unconfigure() did), but that no longer works. Instead
check if the physical address is invalid. That is a much
more appropriate check anyway.
This fixes a bug where the the adapter could be disabled even
though the device was still configuring. This could cause POLL
transmits to time out.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
the video-decoder on rk3328.
RK3399 received some improvements and nodes for the memory controller.
Additional peripherals for PineNote, Gru and BananaPi-R2-Pro.
New boards are the Firefly Station M2, Pine64 SoQuartz SOM and
Quartz64 model B as well as the Radxa Rock3 model A.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmJ8RpUQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgQJjB/9PfcoC3u5FzRDuE8w74u0A3UPx+diqHdsR
QKwqsqngjMNsnCQjwsu8qbbbBevgvELorOVEY+RjuY4uNkxecf9j8lFlItk2UvVf
2ZZZm/vNP16Gaera5S7GVYiWmisLdbyQ8xw61iJoNbCrsWeLDVxJ2unyG+E7dxa6
u5bHhsd58PE/BI0Paxf/OIw4oGh2FAbCbMiXNQjwHHu5eGjgy+V6guqkJ6FruhmG
qlu9DZQz33DGQ7N57ympheqVsih9vm3lA0dfSiOpiyG2CNwZ8k80aW40mEcuJkbA
yWGUHbMc80Kxi2sWkYDWpagavt6M1bn8pQgCrNrRYWVPhktUvG2c
=2V+q
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=XPfy
-----END PGP SIGNATURE-----
Merge tag 'v5.19-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New peripherals supported on rk356x: sfc, usb3, sata and
the video-decoder on rk3328.
RK3399 received some improvements and nodes for the memory controller.
Additional peripherals for PineNote, Gru and BananaPi-R2-Pro.
New boards are the Firefly Station M2, Pine64 SoQuartz SOM and
Quartz64 model B as well as the Radxa Rock3 model A.
* tag 'v5.19-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (32 commits)
arm64: dts: rockchip: enable otg/drd operation of usb_host0_xhci in rk356x
arm64: dts: rockchip: rename HDMI ref clock to 'ref' on rk3399
arm64: dts: rockchip: add dts for Firefly Station M2 rk3566
arm64: dts: rockchip: add SoQuartz CM4IO dts
arm64: dts: rockchip: add Pine64 Quartz64-B device tree
dt-bindings: arm: rockchip: Add Firefly Station M2
dt-bindings: arm: rockchip: Add Pine64 SoQuartz SoM
dt-bindings: arm: rockchip: Add Pine64 Quartz64 Model B
arm64: dts: rockchip: enable usb hub on the radxa rock3 model a
arm64: dts: rockchip: add usb3 support to the radxa rock3 model a
arm64: dts: rockchip: add rk356x sfc support
arm64: dts: rockchip: Add USB and TCPC to rk3566-pinenote
arm64: dts: rockchip: Add accelerometer to rk3566-pinenote
arm64: dts: rockchip: add an input enable pinconf to rk3399
arm64: dts: rockchip: Add vdec support for RK3328
arm64: dts: rockchip: Rename vdec_mmu node for RK3328
arm64: dts: rockchip: Enable dmc and dfi nodes on gru
arm64: dts: rockchip: Add dfi and dmc nodes to rk3399
arm64: dts: rockchip: add clocks property to cru nodes rk3399
arm64: dts: rockchip: use generic node name for pmucru on rk3399
...
Link: https://lore.kernel.org/r/7748558.DvuYhMxLoT@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
If, while trying to claim a free logical address, a POLL message
times out, then abort this process. A CEC_TX_STATUS_TIMEOUT
should be handled the same as a CEC_TX_STATUS_ABORTED.
This avoids a situation where transmits time out due to a
driver or hardware bug and it takes ages before the attempt
to find available free logical addresses finishes.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The __cec_s_log_addrs() function can configure or unconfigure the
adapter. The ioctl handler in cec-api.c will prevent it from being
called to configure the adapter if it was already configured (or in
the process of configuring). But it can still be called to unconfigure
an already unconfigured adapter, and it didn't check for that.
This can cause cec_activate_cnt_dec() to be called too often, causing
a WARN_ON.
Instead first check if adap->log_addrs.num_log_addrs == 0 and return
since in that case the adapter is already unconfigured.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
It's OK to keep the pending pin events when disabling or
enabling the 'adapter'. Zeroing this can cause a race condition
if this happens when the pin kthread is handling a pin event
and calls atomic_dec later, causing work_pin_num_events to become
negative.
Just leave pending events in the queue, they'll be read eventually.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When the adap_enable callback is called the adap->lock is held.
When disabling the adapter it attempts to stop the kthread that
deals with receiving and transmitting messages. However, kthread_stop
waits for the thread to stop, so all that time adap->lock is held.
Unfortunately, the kernel thread itself can call functions that take
that same lock, so a deadlock can occur.
Change the logic to keep the kernel thread running and instead when
disabling the adapter, just set the pin to high, go to idle and then
to state OFF and disable the interrupt. Only stop the kernel thread
when the adapter is deleted.
This way disabling the adapter will not wait for anything and the
deadlock is avoided.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Implement a crypto library interface for the s390-native ChaCha20 cipher
algorithm. This allows us to stop to select CRYPTO_CHACHA20 and instead
select CRYPTO_ARCH_HAVE_LIB_CHACHA. This allows BIG_KEYS=y not to build
a whole ChaCha20 crypto infrastructure as a built-in, but build a smaller
CRYPTO_LIB_CHACHA instead.
Make CRYPTO_CHACHA_S390 config entry to look like similar ones on other
architectures. Remove CRYPTO_ALGAPI select as anyway it is selected by
CRYPTO_SKCIPHER.
Add a new test module and a test script for ChaCha20 cipher and its
interfaces. Here are test results on an idle z15 machine:
Data | Generic crypto TFM | s390 crypto TFM | s390 lib
size | enc dec | enc dec | enc dec
-----+--------------------+------------------+----------------
512b | 1545ns 1295ns | 604ns 446ns | 430ns 407ns
4k | 9536ns 9463ns | 2329ns 2174ns | 2170ns 2154ns
64k | 149.6us 149.3us | 34.4us 34.5us | 33.9us 33.1us
6M | 23.61ms 23.11ms | 4223us 4160us | 3951us 4008us
60M | 143.9ms 143.9ms | 33.5ms 33.2ms | 32.2ms 32.1ms
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the defined variable "desc" to uniform coding style.
Signed-off-by: jianchunfu <jianchunfu@cmss.chinamobile.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The access to cryptd_queue::cpu_queue is synchronized by disabling
preemption in cryptd_enqueue_request() and disabling BH in
cryptd_queue_worker(). This implies that access is allowed from BH.
If cryptd_enqueue_request() is invoked from preemptible context _and_
soft interrupt then this can lead to list corruption since
cryptd_enqueue_request() is not protected against access from
soft interrupt.
Replace get_cpu() in cryptd_enqueue_request() with local_bh_disable()
to ensure BH is always disabled.
Remove preempt_disable() from cryptd_queue_worker() since it is not
needed because local_bh_disable() ensures synchronisation.
Fixes: 254eff7714 ("crypto: cryptd - Per-CPU thread implementation...")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sg length could be more than remaining data on it.
So check the length requirement against the minimum between those two
values.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The "Fallback for xxx" message is annoying, remove it and store the
information in the debugfs.
Let's add more precise fallback stats and display it better.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When testing with some large SG list, the sun8i-ce drivers always
fallback even if it can handle it.
So use sg_nents_for_len() which permits to see less SGs than needed.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move all padding work to a dedicated function.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sg length could be more than remaining data on it.
So check the length requirement against the minimum between those two
values.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Even if sun8i-ss does not handle hmac(sha1) directly, we can provide one
which use the already supported acceleration of sha1.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move all padding work to a dedicated function.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The "Fallback for xxx" message is annoying, remove it and store the
information in the debugfs.
In the same time, reports more fallback statistics.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The current sun8i-ss handle only requests with all SG length being
modulo 64.
But the last SG could be always handled by copying it on the pad buffer.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of memset all pad buffer, it is faster to only put 0 where
needed.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of allocate memory on each requests, it is easier to
pre-allocate buffers.
This made error path easier.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When testing with some large SG list, the sun8i-ss drivers always
fallback even if it can handle it.
So use sg_nents_for_len() which permits to see less SGs than needed.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The first thing we should do after dma_map_single() is to test the
result.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some fallback tests were redundant with what sun8i_ss_hash_need_fallback() already do.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
sun8i-ss does not handle well the possible zero sized sg.
Fixes: d9b45418a9 ("crypto: sun8i-ss - support hash algorithms")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
sun8i-ss fail handling IVs when doing decryption of multiple SGs in-place.
It should backup the last block of each SG source for using it later as
IVs.
In the same time remove allocation on requests path for storing all
IVs.
Fixes: f08fcced6d ("crypto: allwinner - Add sun8i-ss cryptographic offloader")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of allocate memory on each requests, it is easier to
pre-allocate buffer for backup IV.
This made error path easier.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of allocate memory on each requests, it is easier to
pre-allocate buffer for IV.
This made error path easier.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since usb_register_dev() from imon_init_display() from imon_probe() holds
minor_rwsem while display_open() which holds driver_lock and ictx->lock is
called with minor_rwsem held from usb_open(), holding driver_lock or
ictx->lock when calling usb_register_dev() causes circular locking
dependency problem.
Since usb_deregister_dev() from imon_disconnect() holds minor_rwsem while
display_open() which holds driver_lock is called with minor_rwsem held,
holding driver_lock when calling usb_deregister_dev() also causes circular
locking dependency problem.
Sean Young explained that the problem is there are imon devices which have
two usb interfaces, even though it is one device. The probe and disconnect
function of both usb interfaces can run concurrently.
Alan Stern responded that the driver and USB cores guarantee that when an
interface is probed, both the interface and its USB device are locked.
Ditto for when the disconnect callback gets run. So concurrent probing/
disconnection of multiple interfaces on the same device is not possible.
Therefore, we don't need locks for handling race between imon_probe() and
imon_disconnect(). But we still need to handle race between display_open()
/vfd_write()/lcd_write()/display_close() and imon_disconnect(), for
disconnect event can happen while file descriptors are in use.
Since "struct file"->private_data is set by display_open(), vfd_write()/
lcd_write()/display_close() can assume that "struct file"->private_data
is not NULL even after usb_set_intfdata(interface, NULL) was called.
Replace insufficiently held driver_lock with refcount_t based management.
Add a boolean flag for recording whether imon_disconnect() was already
called. Use RCU for accessing this boolean flag and refcount_t.
Since the boolean flag for imon_disconnect() is shared, disconnect event
on either intf0 or intf1 affects both interfaces. But I assume that this
change does not matter, for usually disconnect event would not happen
while interfaces are in use.
Link: https://syzkaller.appspot.com/bug?extid=c558267ad910fc494497
Reported-by: syzbot <syzbot+c558267ad910fc494497@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+c558267ad910fc494497@syzkaller.appspotmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The commit referenced in the Fixes tag removed the 'break' from the else
branch in qcom_rng_read(), causing an infinite loop whenever 'max' is
not a multiple of WORD_SZ. This can be reproduced e.g. by running:
kcapi-rng -b 67 >/dev/null
There are many ways to fix this without adding back the 'break', but
they all seem more awkward than simply adding it back, so do just that.
Tested on a machine with Qualcomm Amberwing processor.
Fixes: a680b1832c ("crypto: qcom-rng - ensure buffer for generate is completely filled")
Cc: stable@vger.kernel.org
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The point of using get/put_device() is to keep references
for as long as the device may be in use. That means dropping
them must be the penultimate action right before freeing the memory.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The timer will report events for an input device.
Reporting events for an unregistered device is bad.
Hence the timer must be killed first.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
GFP_NOIO is fine here.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fix smatch warning:
drivers/media/i2c/s5k6a3.c:234 __s5k6a3_power_on() warn: 'sensor->clock' from clk_prepare_enable() not released on lines: 234.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fixes smatch warning:
drivers/media/i2c/ccs/ccs-core.c:1676 ccs_power_on() warn: 'sensor->ext_clk' from clk_prepare_enable() not released on lines: 1606.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fixes smatch warning:
drivers/media/pci/cx25821/cx25821-alsa.c:768 cx25821_audio_initdev() warn: 'dev->pci->irq' from request_irq() not released on lines: 768.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
