For vp8 not support 4K, need to disable it.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Needs to use mediatek compressed mode for mt8192 decoder.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Getting supported output and capture queue format types according
to decoder capability.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Supported output and capture format types for mt8192 are different
with mt8183. Redefine parameters to store them.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
For lat and core decode in parallel, need to get capture buffer
when core start to decode and put capture buffer to display
list when core decode done.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Data type of status variable, that hold the return value of the ISR,
should be irqreturn_t & not u32. This patch updates status variable type
to irqreturn_t.
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Link: https://lore.kernel.org/r/20220512145025.20205-1-amit.kumar-mahapatra@xilinx.com
Signed-off-by: Mark Brown <broonie@kernel.org>
call vb2_set_plane_payload to set each plane bytesused in buf prepare,
need not to set independently for stateless and statefull architectures.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Supported max resolution for different platforms are not the same: 2K
or 4K, getting it according to dec_capability.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Tzung-Bi Shih<tzungbi@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Different capture buffer format has different buffer size, need to get
real buffer size according to buffer type from scp.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
MT8173 platform use vpu firmware, mt8183/mt8192 will use scp
firmware instead, using chip name is not reasonable to separate
different firmware architecture. Using firmware type is much better.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Tzung-Bi Shih<tzungbi@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lock, power and clock are highly coupled operations. Adds vdec
enable/disable hardware helpers and uses them.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Tzung-Bi Shih<tzungbi@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Will return -EINVAL using standard framework api when test stateless
decoder with cmd VIDIOC_(TRY)DECODER_CMD. Disable them to adjust v4l2
compliance test for user driver(GStreamer/Chrome) won't use decoder cmd.
Fixes: 8cdc3794b2 ("media: mtk-vcodec: vdec: support stateless API")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Crypto module atsha204a is available at i2c address 0x64. Module is used
for symmetric cryptography and provides also hardware random number
generator and OTP storage for device serial number and MAC addresses.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Currently to setup a fully sparse descriptor space upfront, the app needs
to alloate an array of the full size and memset it to -1 and then pass
that in. Make this a bit easier by allowing a flag that simply does
this internally rather than needing to copy each slot separately.
This works with IORING_REGISTER_FILES2 as the flag is set in struct
io_uring_rsrc_register, and is only allow when the type is
IORING_RSRC_FILE as this doesn't make sense for registered buffers.
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently limit these to 32K, but since we're now backing the table
space with vmalloc when needed, there's no reason why we can't make it
bigger. The total space is limited by RLIMIT_NOFILE as well.
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the application passes in IORING_FILE_INDEX_ALLOC as the file_slot,
then that's a hint to allocate a fixed file descriptor rather than have
one be passed in directly.
This can be useful for having io_uring manage the direct descriptor space,
and also allows multi-shot support to work with fixed files.
Normal accept direct requests will complete with 0 for success, and < 0
in case of error. If io_uring is asked to allocated the direct descriptor,
then the direct descriptor is returned in case of success.
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the application passes in IORING_FILE_INDEX_ALLOC as the file_slot,
then that's a hint to allocate a fixed file descriptor rather than have
one be passed in directly.
This can be useful for having io_uring manage the direct descriptor space.
Normal open direct requests will complete with 0 for success, and < 0
in case of error. If io_uring is asked to allocated the direct descriptor,
then the direct descriptor is returned in case of success.
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Applications currently always pick where they want fixed files to go.
In preparation for allowing these types of commands with multishot
support, add a basic allocator in the fixed file table.
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for adding a basic allocator for direct descriptors,
add helpers that set/clear whether a file slot is used.
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
AC'97 was quite commonly used on at least i.MX designs so enable the
glue code that allows use of AC'97 with ASoC based designs to improve
testing coverage.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220513120632.168148-1-broonie@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Michael Chan says:
====================
bnxt_en: Updates for net-next
This small patchset updates the firmware interface, adds timestamping
support for all receive packets, and adds revised NVRAM package error
messages for ethtool and devlink.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of always returning -ENOPKG, decode the firmware error
code further when the HWRM_NVM_INSTALL_UPDATE firmware call fails.
Return a more suitable error code to userspace and log an error
in dmesg.
This is version 2 of the earlier patch that was reverted:
02acd39953 ("bnxt_en: parse result field when NVRAM package install fails")
In this new version, if the call is made through devlink instead of
ethtool, we'll also set the error message in extack.
Link: https://lore.kernel.org/netdev/20220307141358.4d52462e@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add driver support to enable timestamping on all RX packets
that are received by the NIC. This capability can be requested
by the applications using SIOCSHWTSTAMP ioctl with filter type
HWTSTAMP_FILTER_ALL.
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For correctness, we need to configure the packet filters for timestamping
during bnxt_open. This way they are always configured after firmware
reset or chip reset. We should not assume that the filters will always
be retained across resets.
This patch modifies the ioctl handler and always configures the PTP
filters in the bnxt_open() path.
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The main changes are timestamp support for all RX packets and new PCIe
statistics.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The x86 Chromebooks have the ChromeOS ACPI device. This driver attaches
to the ChromeOS ACPI device and exports the values reported by ACPI in a
sysfs directory. This data isn't present in ACPI tables when read
through ACPI tools, hence a driver is needed to do it. The driver gets
data from firmware using the ACPI component of the kernel. The ACPI values
are presented in string form (numbers as decimal values) or binary
blobs, and can be accessed as the contents of the appropriate read only
files in the standard ACPI device's sysfs directory tree. This data is
consumed by the ChromeOS user space.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/Yn4OKYrtV35Dv+nd@debian-BULLSEYE-live-builder-AMD64
Add support for low-level debugging on FLEXCOM USART of
LAN966 SoC.
Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220513092530.19213-1-kavyasree.kotagiri@microchip.com
The dmabuf file uses get_next_ino()(through dma_buf_getfile() ->
alloc_anon_inode()) to get an inode number and uses the same as a
directory name under /sys/kernel/dmabuf/buffers/<ino>. This directory is
used to collect the dmabuf stats and it is created through
dma_buf_stats_setup(). At current, failure to create this directory
entry can make the dma_buf_export() to fail.
Now, as the get_next_ino() can definitely give a repetitive inode no
causing the directory entry creation to fail with -EEXIST. This is a
problem on the systems where dmabuf stats functionality is enabled on
the production builds can make the dma_buf_export(), though the dmabuf
memory is allocated successfully, to fail just because it couldn't
create stats entry.
This issue we are able to see on the snapdragon system within 13 days
where there already exists a directory with inode no "122602" so
dma_buf_stats_setup() failed with -EEXIST as it is trying to create
the same directory entry.
To make the dentry name as unique, use the dmabuf fs specific inode
which is based on the simple atomic variable increment. There is tmpfs
subsystem too which relies on its own inode generation rather than
relying on the get_next_ino() for the same reason of avoiding the
duplicate inodes[1].
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/patch/?id=e809d5f0b5c912fe981dce738f3283b2010665f0
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: <stable@vger.kernel.org> # 5.15.x+
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1652441296-1986-1-git-send-email-quic_charante@quicinc.com
Signed-off-by: Christian König <christian.koenig@amd.com>
The L1 should not be able to adjust LPES mode for the L2. Setting LPES
if the L0 needs it clear would cause external interrupts to be sent to
L2 and missed by the L0.
Clearing LPES when it may be set, as typically happens with XIVE enabled
could cause a performance issue despite having no native XIVE support in
the guest, because it will cause mediated interrupts for the L2 to be
taken in HV mode, which then have to be injected.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220303053315.1056880-7-npiggin@gmail.com
The PowerNV L0 currently pushes the OS xive context when running a vCPU,
regardless of whether it is running a nested guest. The problem is that
xive OS ring interrupts will be delivered while the L2 is running.
At the moment, by default, the L2 guest runs with LPCR[LPES]=0, which
actually makes external interrupts go to the L0. That causes the L2 to
exit and the interrupt taken or injected into the L1, so in some
respects this behaves like an escalation. It's not clear if this was
deliberate or not, there's no comment about it and the L1 is actually
allowed to clear LPES in the L2, so it's confusing at best.
When the L2 is running, the L1 is essentially in a ceded state with
respect to external interrupts (it can't respond to them directly and
won't get scheduled again absent some additional event). So the natural
way to solve this is when the L0 handles a H_ENTER_NESTED hypercall to
run the L2, have it arm the escalation interrupt and don't push the L1
context while running the L2.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220303053315.1056880-6-npiggin@gmail.com
The differences between nested and !nested will become larger in
later changes so split them out for readability.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220303053315.1056880-5-npiggin@gmail.com
Move the cede abort logic out of xive escalation rearming and into
the caller to prepare for handling a similar case with nested guest
entry.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220303053315.1056880-4-npiggin@gmail.com
If there is a pending xive interrupt, inject it at guest entry (if
MSR[EE] is enabled) rather than take another interrupt when the guest
is entered. If xive is enabled then LPCR[LPES] is set so this behaviour
should be expected.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220303053315.1056880-3-npiggin@gmail.com
KVMPPC_NR_LPIDS no longer represents any size restriction on the
LPID space and can be removed. A CPU with more than 12 LPID bits
implemented will now be able to create more than 4095 guests.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220123120043.3586018-7-npiggin@gmail.com
Rather than tie this to KVMPPC_NR_LPIDS which is becoming more dynamic,
fix it to 4096 (12-bits) explicitly for now.
kvmhv_get_nested() does not have to check against KVM_MAX_NESTED_GUESTS
because the L1 partition table registration hcall already did that, and
it checks against the partition table size.
This patch also puts all the partition table size calculations into the
same form, using 12 for the architected size field shift and 4 for the
shift corresponding to the partition table entry size.
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-of-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220123120043.3586018-6-npiggin@gmail.com
This removes the fixed-size lpid_inuse array.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220123120043.3586018-4-npiggin@gmail.com
The LPID allocator init is changed to:
- use mmu_lpid_bits rather than hard-coding;
- use KVM_MAX_NESTED_GUESTS for nested hypervisors;
- not reserve the top LPID on POWER9 and newer CPUs.
The reserved LPID is made a POWER7/8-specific detail.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220123120043.3586018-3-npiggin@gmail.com
Removing kvmppc_claim_lpid makes the lpid allocator API a bit simpler to
change the underlying implementation in a future patch.
The host LPID is always 0, so that can be a detail of the allocator. If
the allocator range is restricted, that can reserve LPIDs at the top of
the range. This allows kvmppc_claim_lpid to be removed.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220123120043.3586018-2-npiggin@gmail.com
It is better to get all loads for the register values in flight
before starting to switch LPID, PID, and LPCR because those
mtSPRs are expensive and serialising.
This also just tidies up the code for a potential future change
to the context switching sequence.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220123114725.3549202-1-npiggin@gmail.com
This facility is controlled by FSCR only. Reserved bits should not be
set in the HFSCR register (although it's likely harmless as this
position would not be re-used, and the L0 is forgiving here too).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220122105639.3477407-1-npiggin@gmail.com
The dt-binding for SCP documents the reg-names order as sram, cfg,
l1tcm. Update the SCP node on the mt8192 devicetree to follow that
order, which gets rid of a dtbs_check warning. This doesn't change any
behavior since the SCP driver accesses the memory regions through the
names anyway.
Fixes: c63556ec6b ("arm64: dts: mt8192: Add SCP node")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220504214516.2957504-1-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This property doesn't seem to exist in the documentation nor
in source code, let's remove it from the device-tree.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20220426134106.242353-7-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Fix the following dtbs_check error by using the correct node name:
/home/fabo/build/linux/mt8183-pumpkin/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dtb: ntc: $nodename:0: 'ntc' does not match '^thermistor(.*)?$'
From schema: /home/fabo/devel/baylibre/linux-mainline/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20220426164755.435372-1-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
On an MT7622 system, the kernel complains of not being able to detect the cache
hierarchy of CPU 0. Specify the shared L2 cache node in the device tree, in
order to fix this.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Link: https://lore.kernel.org/r/20220428225755.785153-1-rsalvaterra@gmail.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
