Defer the IOMMU domain setup until after successfully binding
components, so we can figure out IOMMU support directly from the VOP
devices themselves, rather than manually inferring it from the DT (which
also fails to account for whether the IOMMU driver is actually loaded).
Although this is somewhat of a logical cleanup, the main motivation is
to prepare for a change in the iommu_domain_alloc() interface.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/94eee7ab434fe11eb0787f691e9f1ab03a2e91be.1649168685.git.robin.murphy@arm.com
It's expensive to make a copy of 40B struct iov_iter to the point it
was taking 0.2-0.5% of all cycles in my tests. iov_iter_revert() should
be fine as it's a simple case without nested reverts/truncates.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/a7e1690c00c5dfe700c30eb9a8a81ec59f6545dd.1650884401.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current memory failure code in the debugfs returns -ENOSPC. This is
normally used for indicating that there is no space left on the
device and is not applicable for memory allocation failures.
Replace this with -ENOMEM.
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Link: https://lore.kernel.org/r/20220430194656.44357-1-dossche.niels@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It will cause null-ptr-deref in resource_size(), if platform_get_resource()
returns NULL, move calling resource_size() after devm_ioremap_resource() that
will check 'res' to avoid null-ptr-deref.
Fixes: 2048e3286f ("drm: rockchip: Add basic drm driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220422032854.2995175-1-yangyingliang@huawei.com
Colin Foster says:
====================
ocelot stats improvement
A couple of pick-ups after f187bfa6f35 ("net: ethernet: ocelot: remove
the need for num_stats initializer") - one addresses a warning
patchwork flagged about operator precedence when using macro arguments.
The other is a reduction of unnecessary memory allocation.
====================
Link: https://lore.kernel.org/r/20220430232327.4091825-1-colin.foster@in-advantage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 2f187bfa6f ("net: ethernet: ocelot: remove the need for num_stats
initializer") added a macro that patchwork warned it lacked parentheses
around an argument. Correct this mistake.
Fixes: 2f187bfa6f ("net: ethernet: ocelot: remove the need for num_stats initializer")
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 2f187bfa6f ("net: ethernet: ocelot: remove the need for num_stats
initializer") added a flags field to the ocelot stats structure. The same
behavior can be achieved without this additional field taking up extra
memory.
Remove this structure element to free up RAM
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for management applications to send an MPI3 Encapsulated NVMe
passthru command to the NVMe devices attached to an Avenger controller.
Since the NVMe drives are exposed as SCSI devices by the controller, the
standard NVMe applications cannot be used to interact with the drives and
the command sets supported are also limited by the controller firmware.
Special handling is required for MPI3 Encapsulated NVMe passthru commands
for PRP/SGL setup in the commands.
Link: https://lore.kernel.org/r/20220429211641.642010-8-sumit.saxena@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement driver support for management applications to enable persistent
event log (PEL) notifications. Upon receipt of events, the driver will
increment a sysfs variable named event_counter. The management application
will poll for event_counter value changes and signal the application about
events.
Link: https://lore.kernel.org/r/20220429211641.642010-6-sumit.saxena@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are certain management commands which require firmware intervention.
These commands are termed MPT commands. Add support for them.
Link: https://lore.kernel.org/r/20220429211641.642010-5-sumit.saxena@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch moves the data structures/definitions which are used by
userspace applications from MPI headers to uapi/scsi/scsi_bsg_mpi3mr.h
Link: https://lore.kernel.org/r/20220429211641.642010-4-sumit.saxena@broadcom.com
Reported by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are certain bsg commands which need to be completed by the driver
without involving firmware. These requests are termed driver commands. Add
support for these.
Link: https://lore.kernel.org/r/20220429211641.642010-3-sumit.saxena@broadcom.com
Reported by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Create bsg device per controller for controller management purposes.
bsg device nodes will be named /dev/bsg/mpi3mrctl0, /dev/bsg/mpi3mrctl1,
etc.
Link: https://lore.kernel.org/r/20220429211641.642010-2-sumit.saxena@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The function get_capabilities() has the possibility of failing to allocate
the transfer buffer but it does not currently handle this. This may lead to
exceptions when accessing the buffer.
Add error handling when memory allocation fails.
Link: https://lore.kernel.org/r/20220427025647.298358-1-lienze@kylinos.cn
Signed-off-by: Enze Li <lienze@kylinos.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When tcmu_vma_fault() gets a page successfully, before the current context
completes page fault procedure, find_free_blocks() may run and call
unmap_mapping_range() to unmap the page. Assume that when
find_free_blocks() initially completes and the previous page fault
procedure starts to run again and completes, then one truncated page has
been mapped to userspace. But note that tcmu_vma_fault() has gotten a
refcount for the page so any other subsystem won't be able to use the page
unless the userspace address is unmapped later.
If another command subsequently runs and needs to extend dbi_thresh it may
reuse the corresponding slot for the previous page in data_bitmap. Then
though we'll allocate new page for this slot in data_area, no page fault
will happen because we have a valid map and the real request's data will be
lost.
Filesystem implementations will also run into this issue but they usually
lock the page when vm_operations_struct->fault gets a page and unlock the
page after finish_fault() completes. For truncate filesystems lock pages in
truncate_inode_pages() to protect against racing wrt. page faults.
To fix this possible data corruption scenario we can apply a method similar
to the filesystems. For pages that are to be freed, tcmu_blocks_release()
locks and unlocks. Make tcmu_vma_fault() also lock found page under
cmdr_lock. At the same time, since tcmu_vma_fault() gets an extra page
refcount, tcmu_blocks_release() won't free pages if pages are in page fault
procedure, which means it is safe to call tcmu_blocks_release() before
unmap_mapping_range().
With these changes tcmu_blocks_release() will wait for all page faults to
be completed before calling unmap_mapping_range(). And later, if
unmap_mapping_range() is called, it will ensure stale mappings are removed.
Link: https://lore.kernel.org/r/20220421023735.9018-1-xiaoguang.wang@linux.alibaba.com
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prior patch added a call to lpfc_sli_prep_wqe() prior to
lpfc_sli_issue_iocb(). This call should not have been added as prep_wqe is
called within the issue_iocb routine. So it's called twice now.
Remove the redundant prep call.
Link: https://lore.kernel.org/r/20220427222223.57920-1-jsmart2021@gmail.com
Fixes: 31a59f7570 ("scsi: lpfc: SLI path split: Refactor Abort paths")
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Code inspection has found an additional reference is taken in
lpfc_bsg_rport_els(). Results in the ndlp not being freed thus is leaked.
Fix by removing the redundant refcount taken before WQE submission.
Link: https://lore.kernel.org/r/20220427222158.57867-1-jsmart2021@gmail.com
Co-developed-by: Nigel Kirkland <nigel.kirkland@broadcom.com>
Signed-off-by: Nigel Kirkland <nigel.kirkland@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During device discovery we ended up calling revalidate twice and thus
requested the same parameters multiple times. This was originally necessary
due to the request_queue and gendisk needing to be instantiated to
configure the block integrity profile.
Since this dependency no longer exists, reorganize the integrity probing
code so it can be run once at the end of discovery and drop the superfluous
revalidate call. Postponing the registration step involves splitting
sd_read_protection() into two functions, one to read the device protection
type and one to configure the mode of operation.
As part of this cleanup, make the printing code a bit less verbose.
Link: https://lore.kernel.org/r/20220302053559.32147-14-martin.petersen@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit a83da8a450 ("scsi: sd: Optimal I/O size should be a multiple of
physical block size") validated the reported optimal I/O size against the
physical block size to overcome problems with devices reporting nonsensical
transfer sizes.
However, some devices claim conformity to older SCSI versions that predate
the physical block size being reported. Other devices do not report a
physical block size at all. We need to be able to validate the optimal I/O
size on those devices as well.
Many devices report an OPTIMAL TRANSFER LENGTH GRANULARITY in the same VPD
page as the OPTIMAL TRANSFER LENGTH. Use this value to validate the optimal
I/O size. Also check that the reported granularity is a multiple of the
physical block size, if supported.
Link: https://lore.kernel.org/r/33fb522e-4f61-1b76-914f-c9e6a3553c9b@gmail.com
Link: https://lore.kernel.org/r/20220302053559.32147-9-martin.petersen@oracle.com
Reported-by: Bernhard Sulzer <micraft.b@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the VPD pages already provided by the SCSI midlayer. No need to request
them individually in the SCSI disk driver.
Link: https://lore.kernel.org/r/20220302053559.32147-8-martin.petersen@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since the ATA Information VPD is now cached at device discovery time it is
no longer necessary to request this page when we configure WRITE SAME.
Instead use the cached information to determine if this disk sits behind a
SCSI-ATA translation layer.
Link: https://lore.kernel.org/r/20220302053559.32147-7-martin.petersen@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Low-level device drivers have had the ability to limit the size of an
INQUIRY for many years. This made sense for a wide variety of legacy
devices. However, we are unnecessarily truncating the INQUIRY response for
many modern devices. This prevents us from consulting fields beyond the
first 36 bytes.
If a device reports that it supports a larger INQUIRY response, and the
device also reports that it implements SPC-4 or newer, allow the larger
INQUIRY to proceed.
Link: https://lore.kernel.org/r/20220302053559.32147-4-martin.petersen@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SCSI disk driver consults VPD pages b0 (Block Limits), b1 (Block Device
Characteristics), and b2 (Logical Block Provisioning). Instead of having
sd.c request these pages every revalidate cycle, cache them along with the
other commonly used VPDs.
Link: https://lore.kernel.org/r/20220302053559.32147-6-martin.petersen@oracle.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some devices hang when a buffer size larger than expected is passed in the
ALLOCATION LENGTH field. For REPORT SUPPORTED OPERATION CODES we currently
only request a single command descriptor at a time and therefore the actual
size of the command is known ahead of time. Limit the ALLOCATION LENGTH to
the header size plus the command length of the opcode we are asking about.
Link: https://lore.kernel.org/r/20220302053559.32147-5-martin.petersen@oracle.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We currently default to 255 bytes when fetching VPD pages during discovery.
However, we have had a few devices that are known to wedge if the requested
buffer exceeds a certain size. See commit af73623f5f ("[SCSI] sd: Reduce
buffer size for vpd request") which works around one example of this
problem in the SCSI disk driver.
With commit d188b0675b ("scsi: core: Add sysfs attributes for VPD pages
0h and 89h") we now risk triggering the same issue in the generic midlayer
code.
The problem with the ATA VPD page in particular is that the SCSI portion of
the page is trailed by 512 bytes of verbatim ATA Identify Device
information. However, not all controllers actually provide the additional
512 bytes and will lock up if one asks for more than the 64 bytes
containing the SCSI protocol fields.
Instead of picking a new, somewhat arbitrary, number of bytes for the VPD
buffer size, start fetching the 4-byte header for each page. The header
contains the size of the page as far as the device is concerned. We can use
the reported size to specify the correct allocation length when
subsequently fetching the full page.
The header validation is done by a new helper function scsi_get_vpd_size()
and both scsi_get_vpd_page() and scsi_get_vpd_buf() now rely on this to
query the page size.
In addition, scsi_get_vpd_page() is simplified to mirror the logic in
scsi_get_vpd_page(). This involves removing the Supported VPD Pages lookup
prior to attempting to query a page. There does not appear any evidence,
even in the oldest SCSI specs, that this step is required. We already rely
on scsi_get_vpd_page() throughout the stack and this function never
consulted the Supported VPD Pages. Since this has not caused any problems
it should be safe to remove the precondition from scsi_get_vpd_page().
Instrumented runs also revealed that the Supported VPD Pages lookup had
little effect since the device page index often was larger than the
supplied buffer size. As a result, inquiries frequently bypassed the index
check and went through the "If we ran off the end of the buffer, give us
the benefit of the doubt" code path which assumed the page was present
despite not being listed. The revised code takes both the page size
reported by the device as well as the size of the buffer provided by the
scsi_get_vpd_page() caller into account.
Link: https://lore.kernel.org/r/20220302053559.32147-3-martin.petersen@oracle.com
Fixes: d188b0675b ("scsi: core: Add sysfs attributes for VPD pages 0h and 89h")
Reported-by: Maciej W. Rozycki <macro@orcam.me.uk>
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We now cache VPD page 0x89 (ATA Information) so there is no need to request
it from the hardware. Make mpt3sas use the cached page.
Link: https://lore.kernel.org/r/20220302053559.32147-2-martin.petersen@oracle.com
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
====================
pull-request: ieee802154-next 2022-05-01
Miquel Raynal landed two patch series bundled in this pull request.
The first series re-works the symbol duration handling to better
accommodate the needs of the various phy layers in ieee802154.
In the second series Miquel improves th errors handling from drivers
up mac802154. THis streamlines the error handling throughout the
ieee/mac802154 stack in preparation for sync TX to be introduced for
MLME frames.
====================
Link: https://lore.kernel.org/r/20220501194614.1198325-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
kthread_blkcg is only used by the built-in blk-cgroup code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use blkcg_css instead of open coding it, and switch to a slightly
more natural for loop.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkcg_css is only used in blk-cgroup.c, so move it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove all the includes that aren't actually needed from
<linux/blk-cgroup.h> and push them to the actual source files where
needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No need to make BLK_CGROUP stubs conditional on CONFIG_BLOCK as they
can't be used without that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All callers of bio_blkcg actually want the CSS, so replace it with an
interface that does return the CSS. This now allows to move
struct blkcg_gq to block/blk-cgroup.h instead of exposing it in a
public header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the cgroup_subsys_state instead of a the blkg so that blktrace
doesn't need to poke into blk-cgroup internals, and give the name a
blk prefix as the current name is way too generic for a public
interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no real need to expose the blkcg structure to the whole kernel.
Move it to the private header an expose a helper to let the writeback
code access the cgwb_list member.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move these two functions out of line as there is no good reason
to inline them. Also switch to passing a cgroup_subsys_state
instead of doing the conversion in the caller to prepare for making
the blkcg structure private to blk-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no urgent need to inline this function, so move it out of line.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No need to have these helpers inline. Also remove the stubs and just use
an IS_ENABLED for the get side (the set side already is only built
conditionlly).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme-fc appid support needs CONFIG_BLK_CGROUP_FC_APPID to work, so disable
the whole code if the option is not set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 6d2426b2f2 ("kunit: Support skipped tests") switched to using
`enum kunit_status` to track the result of running a test/suite since we
now have more than just pass/fail.
This callsite wasn't updated, silently converting to enum to a bool and
then back.
Fixes: 6d2426b2f2 ("kunit: Support skipped tests")
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, the kfence test suite could not run via "normal" means since
KUnit didn't support per-suite setup/teardown. So it manually called
internal kunit functions to run itself.
This has some downsides, like missing TAP headers => can't use kunit.py
to run or even parse the test results (w/o tweaks).
Use the newly added support and convert it over, adding a .kunitconfig
so it's even easier to run from kunit.py.
People can now run the test via
$ ./tools/testing/kunit/kunit.py run --kunitconfig=mm/kfence --arch=x86_64
...
[11:02:32] Testing complete. Passed: 23, Failed: 0, Crashed: 0, Skipped: 2, Errors: 0
[11:02:32] Elapsed time: 43.562s total, 0.003s configuring, 9.268s building, 34.281s running
Cc: kasan-dev@googlegroups.com
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Tested-by: David Gow <davidgow@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
KUnit has support for setup/cleanup logic for each test case in a suite.
But it lacks the ability to specify setup/cleanup for the entire suite
itself.
This can be used to do setup that is too expensive or cumbersome to do
for each test.
Or it can be used to do simpler things like log debug information after
the suite completes.
It's a fairly common feature, so the lack of it is noticeable.
Some examples in other frameworks and languages:
* https://docs.python.org/3/library/unittest.html#setupclass-and-teardownclass
* https://google.github.io/googletest/reference/testing.html#Test::SetUpTestSuite
Meta:
This is very similar to this patch here: https://lore.kernel.org/linux-kselftest/20210805043503.20252-3-bvanassche@acm.org/
The changes from that patch:
* pass in `struct kunit *` so users can do stuff like
`kunit_info(suite, "debug message")`
* makes sure the init failure is bubbled up as a failure
* updates kunit-example-test.c to use a suite init
* Updates kunit/usage.rst to mention the new support
* some minor cosmetic things
* use `suite_{init,exit}` instead of `{init/exit}_suite`
* make suite init error message more consistent w/ test init
* etc.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
These names sound more general than they are.
The _end() function increments a `static int kunit_suite_counter`, so it
can only safely be called on suites, aka top-level subtests.
It would need to have a separate counter for each level of subtest to be
generic enough.
So rename it to make it clear it's only appropriate for suites.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Issuing a memop on a protected vm does not make sense,
neither is the memory readable/writable, nor does it make sense to check
storage keys. This is why the ioctl will return -EINVAL when it detects
the vm to be protected. However, in order to ensure that the vm cannot
become protected during the memop, the kvm->lock would need to be taken
for the duration of the ioctl. This is also required because
kvm_s390_pv_is_protected asserts that the lock must be held.
Instead, don't try to prevent this. If user space enables secure
execution concurrently with a memop it must accecpt the possibility of
the memop failing.
Still check if the vm is currently protected, but without locking and
consider it a heuristic.
Fixes: ef11c9463a ("KVM: s390: Add vm IOCTL for key checked guest absolute memory access")
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20220322153204.2637400-1-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
