There's no need to embed the struct spi_bitbang into our private
data (struct spi_imx_data), the spi core is flexible enough, so that
we only need a pointer to the allocated struct spi_controller.
This is also a preparation patch to add PIO based polling support to
the driver.
Co-developed-by: David Jander <david@protonic.nl>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20220502175457.1977983-8-mkl@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
With patch:
| 8caab75fd2 ("spi: Generalize SPI "master" to "controller"")
the SPI "master" was generalized to "controller". This patch completed
the conversion of the spi-imx driver by replacing the remaining
occurrences of master to controller.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20220502175457.1977983-7-mkl@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes the following sparse warning by using a swab32s()
instead of a cpu_to_be32(). The driver is used on little endian
systems only and we really want to swap the bytes.
| drivers/spi/spi-imx.c:305:29: warning: incorrect type in assignment (different base types)
| drivers/spi/spi-imx.c:305:29: expected unsigned int val
| drivers/spi/spi-imx.c:305:29: got restricted __be32 [usertype]
| drivers/spi/spi-imx.c:361:21: warning: incorrect type in assignment (different base types)
| drivers/spi/spi-imx.c:361:21: expected unsigned int [assigned] [usertype] val
| drivers/spi/spi-imx.c:361:21: got restricted __be32 [usertype]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20220502175457.1977983-5-mkl@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes the following checkpatch warning, by making val an
"unsigned int".
| WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
| + unsigned val = 0;
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20220502175457.1977983-4-mkl@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes the following checkpatch warning by removing the
trailing backslash:
| WARNING: Avoid unnecessary line continuations
| + spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20220502175457.1977983-3-mkl@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes the following and similar sparse warnings by adding
the missing identifier names to the function definitions:
| WARNING: function definition argument 'struct spi_imx_data *' should also have an identifier name
| #68: FILE: drivers/spi/spi-imx.c:68:
| + int (*prepare_message)(struct spi_imx_data *, struct spi_message *);
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20220502175457.1977983-2-mkl@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the ipc flood test is only supported with SOF_IPC.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220506132647.18690-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The IPC message representation of an IPC4 differs from the IPC3 version
significantly.
The message for IPC4 should be written to the debugfs file in this form:
0-7 IPC4 header (2x u32)
8- additional payload, if any
The reply is given back in the same form.
The message size limitation is the same as with the IPC3, only messages
which can fit to the mailbox can be injected (and received).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220506132647.18690-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move out the code for sending the IPC message into a separate helper
function in preparation for support for handling IPC4 communication.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220506132647.18690-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to be able to send an IPC4 message, the
sof_client_ipc_tx_message() needs to parse the tx message differently to
extract the size.
The IPC notification registration is done by providing the notification
type and the whole message is passed to the client when a match is found.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220506132647.18690-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Provide a way for the client drivers to query the ipc_type used by the
firmware.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220506132647.18690-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using the SOF_IPC_MSG_MAX_SIZE as the maximum payload size for
and IPC message, use the provided API to query it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220506132647.18690-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using the SOF_IPC_MSG_MAX_SIZE as the maximum payload size for
and IPC message, use the provided API to query it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220506132647.18690-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Provide a way for the client drivers to query the maximum payload size of
an IPC message.
Currently clients do not have access to this information and they can only
use the SOF_IPC_MSG_MAX_SIZE defined value.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220506132647.18690-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Following changes have been made:
- S5, L4, L18, L20 and L21 were removed (S5 is managed by
SPMI, whereas the rest seems not to exist [or at least it's blocked
by Sony Loire /MSM8956/ RPM firmware])
- Supply maps have were adjusted to reflect regulator changes.
Fixes: e44adca5fa ("regulator: qcom_smd: Add PM8950 regulators")
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20220430163753.609909-1-konrad.dybcio@somainline.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Nícolas F. R. A. Prado <nfraprado@collabora.com>:
These patches add properties that were missing on the dt-bindings of the
audio components used by mt8192-asurada. Namely the i2s-share
properties for the sound platform and the #sound-dai-cells on the
rt1015p and rt5682 codecs when they're referenced by the machine sound
node.
Nícolas F. R. A. Prado (3):
ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties
ASoC: dt-bindings: rt1015p: Add #sound-dai-cells
ASoC: dt-bindings: rt5682: Add #sound-dai-cells
Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5 +++++
Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml | 3 +++
Documentation/devicetree/bindings/sound/rt5682.txt | 2 ++
3 files changed, 10 insertions(+)
--
2.36.0
Turns out that ever since this mount option was added, passing
`softreval` in NFS mount options cancelled all other flags while not
affecting the underlying flag `NFS_MOUNT_SOFTREVAL`.
Fixes: c74dfe97c1 ("NFS: Add mount option 'softreval'")
Signed-off-by: Dan Aloni <dan.aloni@vastdata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
This reverts commit f346e96267.
The commit tried to fix a possible real bug but it made it even worse.
The fix was simply buggy as now an error out to out_offline_policy or
out_exit_policy will try to release a semaphore which was never taken in
the first place. This works fine only if we failed late, i.e. via
out_destroy_policy.
Fixes: f346e96267 ("cpufreq: Fix possible race in cpufreq online error path")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The device mapper dm-crypt target is using scnprintf("%02x", cc->key[i]) to
report the current key to userspace. However, this is not a constant-time
operation and it may leak information about the key via timing, via cache
access patterns or via the branch predictor.
Change dm-crypt's key printing to use "%c" instead of "%02x". Also
introduce hex2asc() that carefully avoids any branching or memory
accesses when converting a number in the range 0 ... 15 to an ascii
character.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
EAGAIN doesn't guarantee to have a free section. Let's report it.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If the number of unusable blocks is not larger than
unusable capacity, we can skip GC when checkpoint
disabling.
Signed-off-by: Weichao Guo <guoweichao@oppo.com>
Signed-off-by: Chao Yu <chao@kernel.org>
[Jaegeuk Kim: Fix missing gc_mode assignment]
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The "r" variable shadows an earlier "r" that has function scope. It
means that we accidentally return success instead of an error code.
Smatch has a warning for this:
drivers/md/dm-integrity.c:4503 dm_integrity_ctr()
warn: missing error code 'r'
Fixes: 7eada909bf ("dm: add integrity target")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
dm-stats can be used with a very large number of entries (it is only
limited by 1/4 of total system memory), so add rescheduling points to
the loops that iterate over the entries.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The Arm Komeda (aka Mali-D71) is a display controller that scans out a
framebuffer and hands a signal to a digital encoder to generate a DVI
or HDMI signal. It supports up to two pipelines, each frame can be
composed of up to four layers.
Convert the existing DT binding to DT schema.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220506140533.3566431-12-andre.przywara@arm.com
The Arm Mali Display Processor (DP) 5xx/6xx is a series of IP that scans
out a framebuffer and hands the pixels over to a digital signal encoder.
It supports multiple layers, scaling and rotation.
Convert the existing DT binding to DT schema.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220506140533.3566431-11-andre.przywara@arm.com
The Arm HDLCD is a display controller that scans out a framebuffer and
hands a signal to a digital encoder to generate a DVI or HDMI signal.
Convert the existing DT binding to DT schema.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220506140533.3566431-10-andre.przywara@arm.com
The Arm PL110 and PL111 are IP blocks that provide a display engine with
an LCD interface, being able to drive a variety of LC panels.
Convert the binding over to DT schema, to the DTs can be automatically
checked.
This still contains the deprecated "arm,pl11x,tft-r0g0b0-pads" property,
because this is used by several DTs in the tree.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
[robh: make interrupts optional (not connected on Realview EB)]
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220506140533.3566431-9-andre.przywara@arm.com
The Arm Versatile Express system features a bridge device that provides
access to various smaller devices like clocks, reset gates and various
sensors.
Extract the second half of the informal vexpress-sysreg.txt binding and
make it proper DT schema compliant. This makes the old .txt binding
redundant, so remove it.
This describes both the actual parent configuration bridge, as well as
all the possible children devices.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220506140533.3566431-8-andre.przywara@arm.com
The Arm Versatile Express system control register block provides GPIO
functionality to some devices and is also used for board identification.
Extract the first half of the informal vexpress-sysreg.txt binding and
make it proper DT schema compliant.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220506140533.3566431-7-andre.przywara@arm.com
The Arm PrimeCell Advanced Audio CODEC Interface (AACI aka PL041) is
a peripheral that provides communication with an audio CODEC.
Add a simple DT schema binding for it, so that DTs can be validated
automatically.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220506140533.3566431-5-andre.przywara@arm.com
The Arm SP810 IP is a "system controller", providing clocks, timer and a
watchdog.
Convert the DT binding to DT schema, to allow automatic validation.
The existing .txt binding described all properties as required, but the
assigned-clock* and clock-output-names are actually not (from a hardware
perspective). The only existing driver I could find (in Linux) doesn't
require them either, so drop those properties from the "required" list.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220506140533.3566431-4-andre.przywara@arm.com
Convert the Arm Statisical Profiling Extension (SPE) binding to DT
schema.
Not much to see here, basically just the announcement that SPE is
integrated on the system level and where the IRQ is routed to.
Move it into the more suitable perf/ directory on the way.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220506140533.3566431-3-andre.przywara@arm.com
The Page Request Interface (PRI) is an optional PCIe feature. As such, a
SMMU would not need to handle it if the PCIe host bridge or the SMMU
itself do not implement it. Also an SMMU could be connected to a platform
device, without any PRI functionality whatsoever.
In all cases there would be no SMMU PRI queue interrupt to be wired up
to an interrupt controller.
At the moment, with the "eventq,gerror,priq,cmdq-sync" order, we
would need to sacrifice the command queue sync interrupt as well, which
might not be desired.
Relax the binding to allow specifying certain useful combinations of
wired interrupts, for instance just the "gerror" interrupt, or omitting
both "pri" and "cmdq-sync".
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220506140533.3566431-2-andre.przywara@arm.com
3th set of pdx86 fixes for 5.18:
- thinkpad_acpi AMD suspend/resume + fan detection fixes
- 2 other small fixes
- 1 hardware-id addition
The following is an automated git shortlog grouped by driver:
platform/surface:
- aggregator: Fix initialization order when compiling as builtin module
- gpe: Add support for Surface Pro 8
platform/x86/intel:
- Fix 'rmmod pmt_telemetry' panic
thinkpad_acpi:
- Correct dual fan probe
- Add a s2idle resume quirk for a number of laptops
- Convert btusb DMI list to quirks
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmJ4wcMUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9waWwf/aLApxERv0yUcmXjqKDamzC2FgP6v
D17TeWaXBrBD+PAF3DcsrZFfZMh8sBVZSac8p7MobdS5UY/DgPTMkuCBPiKcvK4I
QXZgSAEL/yUeOaGfSDVI6tp50QlhWqF5VYYGA6NCqzERnxP9fhknY+pcmaGojX23
Wn5EP3oOBCSMvOLPCIb+j85kEaxHqLAyKeYUbg5zBJRwsyZ7A5iB+lQ/dDAUwrUo
CLdAYSLieIBS1g9Gb9bZCK7sg2qD+QuD5xuO9OA4GBvU5cH/5ooEpi6cIgrbsDzh
ssRLqzURd5SoxOvIvXQyfRxwhaNtnsEORUREil3Qbl/pB6B1vxzVSmfOfg==
=5aTG
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- thinkpad_acpi AMD suspend/resume + fan detection fixes
- two other small fixes
- one hardware-id addition
* tag 'platform-drivers-x86-v5.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/surface: aggregator: Fix initialization order when compiling as builtin module
platform/surface: gpe: Add support for Surface Pro 8
platform/x86/intel: Fix 'rmmod pmt_telemetry' panic
platform/x86: thinkpad_acpi: Correct dual fan probe
platform/x86: thinkpad_acpi: Add a s2idle resume quirk for a number of laptops
platform/x86: thinkpad_acpi: Convert btusb DMI list to quirks
i.MX93 features a Cortex-M33 core which could be kicked by ROM/Bootloader
/Linux. Similar with i.MX8MN/P, we use SMC to trap into Arm Trusted
Firmware to start/stop the M33 core.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220429005346.2108279-3-peng.fan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Kernel imposes a pretty particular restriction on ringbuf map size. It
has to be a power-of-2 multiple of page size. While generally this isn't
hard for user to satisfy, sometimes it's impossible to do this
declaratively in BPF source code or just plain inconvenient to do at
runtime.
One such example might be BPF libraries that are supposed to work on
different architectures, which might not agree on what the common page
size is.
Let libbpf find the right size for user instead, if it turns out to not
satisfy kernel requirements. If user didn't set size at all, that's most
probably a mistake so don't upsize such zero size to one full page,
though. Also we need to be careful about not overflowing __u32
max_entries.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-9-andrii@kernel.org
Add barrier() and barrier_var() macros into bpf_helpers.h to be used by
end users. While a bit advanced and specialized instruments, they are
sometimes indispensable. Instead of requiring each user to figure out
exact asm volatile incantations for themselves, provide them from
bpf_helpers.h.
Also remove conflicting definitions from selftests. Some tests rely on
barrier_var() definition being nothing, those will still work as libbpf
does the #ifndef/#endif guarding for barrier() and barrier_var(),
allowing users to redefine them, if necessary.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-8-andrii@kernel.org
Add bpf_core_field_offset() helper to complete field-based CO-RE
helpers. This helper can be useful for feature-detection and for some
more advanced cases of field reading (e.g., reading flexible array members).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-6-andrii@kernel.org
Excercise both supported forms of bpf_core_field_exists() and
bpf_core_field_size() helpers: variable-based field reference and
type/field name-based one.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-5-andrii@kernel.org
Allow to specify field reference in two ways:
- if user has variable of necessary type, they can use variable-based
reference (my_var.my_field or my_var_ptr->my_field). This was the
only supported syntax up till now.
- now, bpf_core_field_exists() and bpf_core_field_size() support also
specifying field in a fashion similar to offsetof() macro, by
specifying type of the containing struct/union separately and field
name separately: bpf_core_field_exists(struct my_type, my_field).
This forms is quite often more convenient in practice and it matches
type-based CO-RE helpers that support specifying type by its name
without requiring any variables.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-4-andrii@kernel.org
It will be annoying and surprising for users of __kptr and __kptr_ref if
libbpf silently ignores them just because Clang used for compilation
didn't support btf_type_tag(). It's much better to get clear compiler
error than debug BPF verifier failures later on.
Fixes: ef89654f2b ("libbpf: Add kptr type tag macros to bpf_helpers.h")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-3-andrii@kernel.org
Prevent "classic" and light skeleton generation rules from stomping on
each other's toes due to the use of the same <obj>.linked{1,2,3}.o
naming pattern. There is no coordination and synchronizataion between
.skel.h and .lskel.h rules, so they can easily overwrite each other's
intermediate object files, leading to errors like:
/bin/sh: line 1: 170928 Bus error (core dumped)
/data/users/andriin/linux/tools/testing/selftests/bpf/tools/sbin/bpftool gen skeleton
/data/users/andriin/linux/tools/testing/selftests/bpf/test_ksyms_weak.linked3.o
name test_ksyms_weak
> /data/users/andriin/linux/tools/testing/selftests/bpf/test_ksyms_weak.skel.h
make: *** [Makefile:507: /data/users/andriin/linux/tools/testing/selftests/bpf/test_ksyms_weak.skel.h] Error 135
make: *** Deleting file '/data/users/andriin/linux/tools/testing/selftests/bpf/test_ksyms_weak.skel.h'
Fix by using different suffix for light skeleton rule.
Fixes: c48e51c8b0 ("bpf: selftests: Add selftests for module kfunc support")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220509004148.1801791-2-andrii@kernel.org
The panic notifier infrastructure executes registered callbacks when
a panic event happens - such callbacks are executed in atomic context,
with interrupts and preemption disabled in the running CPU and all other
CPUs disabled. That said, mutexes in such context are not a good idea.
This patch replaces a regular mutex with a mutex_trylock safer approach;
given the nature of the mutex used in the driver, it should be pretty
uncommon being unable to acquire such mutex in the panic path, hence
no functional change should be observed (and if it is, that would be
likely a deadlock with the regular mutex).
Fixes: 2227b7c746 ("coresight: add support for CPU debug module")
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220427224924.592546-10-gpiccoli@igalia.com
