Commit 38225f2ef2 ("ARM/omap1: switch to use dma_direct_set_offset for
lbus DMA offsets") removed a lot of mach/memory.h, but left the USB
offset handling split into arch/arm/mach-omap1/usb.c and
drivers/usb/host/ohci-omap.c.
This can cause a randconfig build warning that now fails the build
with -Werror:
arch/arm/mach-omap1/usb.c:561:30: error: 'omap_1510_usb_ohci_nb' defined but not used [-Werror=unused-variable]
561 | static struct notifier_block omap_1510_usb_ohci_nb = {
| ^~~~~~~~~~~~~~~~~~~~~
Move it all into the platform file to get rid of the final
location that relies on mach/memory.h.
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210927144118.2464881-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This restricts the QCOM_SCM driver to depend on ARCH_QCOM, to reduce
it's presence after becoming a loadable module.
It then fixes a regression in the mdt_loader, where firmware with the
hash segment marked as PT_LOAD would no longer be accepted, preventing
several MSM8974 and SDM660 devices from loading remoteproc firmware.
Lastly it corrects the drvdata associated with the socinfo device during
probe, to match that expected by the remove function.
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmFVJj0bHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FvDEP/iON76XThrTEUVeNGSoj
19UvpdYhdZuD81H5hHxyqQR1MA2GODoYRzvp3UiWxvJbTN8a3TGX+67O1b5Pe+1g
CtauaLgUpi8OzariDrLUomvxco1D0Gpmoi1eBmwGD88ZDxnH12qHrvTlezm9NDNa
GvIdSPBh5ScbICtWQlNu5aYQDlXYLOF6tV85jSdsuA3pGiDtgOriHMwZqVsgLaRG
ARvvBMPCt3876wEg2mBbLSay/69KHUIGEa8n/j0+oaiGQBlCg3VGKHzUPtwBotpw
1vPJz3QBg+kJlCAVqv2c+vnTllRwZkpZv7uFteu5IQsnqaRQa3a6OD6G2ywaKDtS
1wbHTb8cCjLhUU+P1bUXpQwjrB4g1r0OroWiAMA0zK1yf8Qe5RfYfZ8uOkviHhS0
6dZbHm5i9B2Tj+aCva4BLTTqGUy6Ui0IR8QGo4C437EvXHPVNEYo7xlX2LCN3+31
zBW9LmGDLbABbRmxi6Xb66JPwlt6RKzNfUxNCEtUiVSrVUEHnkaiqrZ2Mx+2c2iV
WyrmqPE2oLN5yBk1rfgoZ8klHAcaCZ50/WDIHADyIlxYclW7MybEWAhRrBx8Strj
V3bj23ek2c0OvZ92FppeFH7xChEzPyMdigoVybOb7LkhJUI7AiNgWS21T55AuR+2
XdOLoj7vFBkQBiIWGTE/n4rT
=c3Iv
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=x5sv
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-fixes-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v5.15
This restricts the QCOM_SCM driver to depend on ARCH_QCOM, to reduce
it's presence after becoming a loadable module.
It then fixes a regression in the mdt_loader, where firmware with the
hash segment marked as PT_LOAD would no longer be accepted, preventing
several MSM8974 and SDM660 devices from loading remoteproc firmware.
Lastly it corrects the drvdata associated with the socinfo device during
probe, to match that expected by the remove function.
* tag 'qcom-drivers-fixes-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom_scm: QCOM_SCM should depend on ARCH_QCOM
soc: qcom: mdt_loader: Drop PT_LOAD check on hash segment
soc: qcom: socinfo: Fixed argument passed to platform_set_data()
Link: https://lore.kernel.org/r/20210930025456.1035-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This starts by reverting the SC7280 CPUfreq update, which was merged
before concensus about the associated drivers changes was reached.
It then moves the reserved-memory changes done to get IPA working on the
Lenovo Yoga C630 into the Yoga specific DTS, as changing the memory map
on the platform level did break a couple of the other boards.
It fixes the HDMI audio on Trogdor and add missing Aggre2 NOC qos clocks
on SDM6{30,36,60} which prevented some boards from booting.
Lastly it enables the PON module on SM8250/QRB5165, as the lack thereof
is blocking automated testing in LKFT.
-----BEGIN PGP SIGNATURE-----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=QK4n
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=lLJz
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 DTS fixes for 5.15
This starts by reverting the SC7280 CPUfreq update, which was merged
before concensus about the associated drivers changes was reached.
It then moves the reserved-memory changes done to get IPA working on the
Lenovo Yoga C630 into the Yoga specific DTS, as changing the memory map
on the platform level did break a couple of the other boards.
It fixes the HDMI audio on Trogdor and add missing Aggre2 NOC qos clocks
on SDM6{30,36,60} which prevented some boards from booting.
Lastly it enables the PON module on SM8250/QRB5165, as the lack thereof
is blocking automated testing in LKFT.
* tag 'qcom-arm64-fixes-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sdm630: Add missing a2noc qos clocks
arm64: dts: qcom: qrb5165-rb5: enabled pwrkey and resin nodes
arm64: dts: qcom: pm8150: specify reboot mode magics
arm64: dts: qcom: pm8150: use qcom,pm8998-pon binding
arm64: dts: qcom: sc7180-trogdor: Fix lpass dai link for HDMI
arm64: dts: qcom: sdm850-yoga: Reshuffle IPA memory mappings
Revert "arm64: dts: qcom: sc7280: Fixup the cpufreq node"
Link: https://lore.kernel.org/r/20210930025509.1091-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Bunch of DTS fixes to resolve addressing issues with some of the device
nodes, dropping unused/undocumented properties in various nodes, and
aligning node names with dtschema.
-----BEGIN PGP SIGNATURE-----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=t92O
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=YUKB
-----END PGP SIGNATURE-----
Merge tag 'juno-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Juno/Vexpress fixes for v5.15
Bunch of DTS fixes to resolve addressing issues with some of the device
nodes, dropping unused/undocumented properties in various nodes, and
aligning node names with dtschema.
* tag 'juno-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm: dts: vexpress: Fix motherboard bus 'interrupt-map'
arm: dts: vexpress: Fix addressing issues with 'motherboard-bus' nodes
arm: dts: vexpress-v2p-ca9: Fix the SMB unit-address
arm: dts: vexpress: Drop unused properties from motherboard node
arm64: dts: arm: drop unused interrupt-names in MHU
ARM: dts: arm: align watchdog and mmc node names with dtschema
arm64: dts: arm: align watchdog and mmc node names with dtschema
arm64: dts: fvp: Remove panel timings
Link: https://lore.kernel.org/r/20210927105249.3583380-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This corrects the use of depricated chipid and clock names, for which
support was finally dropped from the driver. It also ensures that the
DSI PLL is fed by the correct clock, now that it's being migrated to not
rely on global clock names.
-----BEGIN PGP SIGNATURE-----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=xHHw
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=C1Zc
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-fixes-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm DTS fixes for v5.15
This corrects the use of depricated chipid and clock names, for which
support was finally dropped from the driver. It also ensures that the
DSI PLL is fed by the correct clock, now that it's being migrated to not
rely on global clock names.
* tag 'qcom-dts-fixes-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: apq8064: update Adreno clock names
ARM: dts: qcom: apq8064: Use 27MHz PXO clock as DSI PLL reference
ARM: dts: qcom: apq8064: use compatible which contains chipid
Link: https://lore.kernel.org/r/20210930025526.1146-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- More fixes for AT91 platform power management code related to the
introduction of sama7g5:
- management of DDR3L regulator rails for sama7g5ek
- loading of TLB on different cores
- PIO controller slew-rate settings for sama7g5ek: be aligned with
datasheet requirements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYVrmgAAKCRAfOrpwrNPN
DC+cAP4xdLuKn1ClN3SVVutTuw9V0gRntjjcNhtWtJMl5RBxoQD/aD7cqFJZbAJA
FP6nrsy7RYfXLQv87Wm/v5xsTi5Ctwc=
=x2my
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=8NKm
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
AT91 fixes#2 for 5.15:
- More fixes for AT91 platform power management code related to the
introduction of sama7g5:
- management of DDR3L regulator rails for sama7g5ek
- loading of TLB on different cores
- PIO controller slew-rate settings for sama7g5ek: be aligned with
datasheet requirements.
* tag 'at91-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama7g5ek: to not touch slew-rate for SDMMC pins
ARM: dts: at91: sama7g5ek: use proper slew-rate settings for GMACs
ARM: at91: pm: preload base address of controllers in tlb
ARM: at91: pm: group constants and addresses loading
ARM: dts: at91: sama7g5ek: add suspend voltage for ddr3l rail
Link: https://lore.kernel.org/r/20211004114344.19304-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add Vignesh to TI K3 platform maintainership. We will rotate roles for
each kernel version to help spread the work load a little better.
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210915121308.26795-1-nm@ti.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With commit c709135e57 ("pinctrl: at91-pio4: add support for slew-rate")
and commit cbde6c823b ("pinctrl: at91-pio4: Fix slew rate disablement")
the slew-rate is enabled by default for each configured pin. The datasheet
specifies at chapter "Output Driver AC Characteristics" that HSIO
drivers (use in SDMMCx and QSPI0 peripherals), don't have a slewrate
setting but are rather calibrated against an external 1% resistor mounted
on the SDMMCx_CAL or QSPI0_CAL pins. Depending on the target signal
frequency and the external load, it is possible to adjust their target
output impedance. Thus set slew-rate = <0> for SDMMC (QSPI is not enabled
at the moment in device tree).
Fixes: 7540629e2f ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210915074836.6574-3-claudiu.beznea@microchip.com
Datasheet chapter "EMAC Timings" specifies that while in 3.3V domain
GMAC's MDIO pins should be configured with slew-rate enabled, while the
data + signaling pins should be configured with slew-rate disabled when
GMAC works in RGMII or RMII modes. The pin controller for SAMA7G5 sets
the slew-rate as enabled for all pins. Adapt the device tree to comply
with these.
Fixes: 7540629e2f ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210915074836.6574-2-claudiu.beznea@microchip.com
In suspend/resume procedure for AT91 architecture different controllers
(PMC, SHDWC, RAM, RAM PHY, SFRBU) are accessed to do the proper settings
for power saving. Commit f0bbf17958 ("ARM: at91: pm: add self-refresh
support for sama7g5") introduced the access to RAMC PHY controller for
SAMA7G5. The access to this controller is done after RAMC ports are
closed, thus any TLB walk necessary for RAMC PHY virtual address will
fail. In the development branch this was not encountered. However, on
current kernel the issue is reproducible.
To solve the issue the previous mechanism of pre-loading the TLB with
the RAMC PHY virtual address has been used. However, only the addition
of this new pre-load breaks the functionality for ARMv5 based
devices (SAM9X60). This behavior has been encountered previously
while debugging this code and using the same mechanism for pre-loading
address for different controllers (e.g. pin controller, the assumption
being that other requested translations are replaced from TLB).
To solve this new issue the TLB flush + the extension of pre-loading
the rest of controllers to TLB (e.g. PMC, RAMC) has been added. The
rest of the controllers should have been pre-loaded previously, anyway.
Fixes: f0bbf17958 ("ARM: at91: pm: add self-refresh support for sama7g5")
Depends-on: e42cbbe5c9 ("ARM: at91: pm: group constants and addresses loading")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210930154219.2214051-4-claudiu.beznea@microchip.com
SAMA7G5-EK board has DDR3L type of memory soldered. This needs 1.35V. The
1.35V for DDR3L rail at run-time is selected by the proper configuration
on SELV2 pin (for 1.35V it needs to be in high-z state). When suspended
the MCP16502 PMIC soldered on SAMA7G5-EK will use different sets of
configuration registers to provide proper voltages on its rail. Run-time
configuration registers could be configured differently than suspend
configuration register for MCP16502 (VSEL2 affects only run-time
configuration). In suspend states the DDR3L memory soldered on SAMA7G5-EK
switches to self-refresh. Even on self-refresh it needs to be powered by
a 1.35V rail. Thus, make sure the PMIC is configured properly when system
is suspended.
Fixes: 7540629e2f (ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210930154219.2214051-2-claudiu.beznea@microchip.com
Commit 078fb7aa6a ("arm: dts: vexpress: Fix addressing issues with
'motherboard-bus' nodes") broke booting on a couple of 32-bit VExpress
boards. The problem is #address-cells size changed, but interrupt-map
was not updated. This results in the timer interrupt (and all the
other motherboard interrupts) not getting mapped.
As the 'interrupt-map' properties are all just duplicates across boards,
just move them into vexpress-v2m.dtsi and vexpress-v2m-rs1.dtsi.
Strictly speaking, 'interrupt-map' is dependent on the parent
interrupt controller, but it's not likely we'll ever have a different
parent than GICv2 on these old platforms. If there was one,
'interrupt-map' can still be overridden.
Link: https://lore.kernel.org/r/20210924214221.1877686-1-robh@kernel.org
Fixes: 078fb7aa6a ("arm: dts: vexpress: Fix addressing issues with 'motherboard-bus' nodes")
Cc: Guillaume Tucker <guillaume.tucker@collabora.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Reported-by: Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Enable powerkey and resin nodes to let the board handle POWER and
Volume- keys properly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210916151341.1797512-3-dmitry.baryshkov@linaro.org
Specify recovery and bootloader magic values to be programmed by the
qcom-pon driver. This allows the bootloader to handle
reboot-to-bootloader functionality.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210916151341.1797512-2-dmitry.baryshkov@linaro.org
Change pm8150 to use the qcom,pm8998-pon compatible string for the pon
in order to pass reboot mode properly.
Fixes: 5101f22a5c ("arm64: dts: qcom: pm8150: Add base dts file")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210916151341.1797512-1-dmitry.baryshkov@linaro.org
This should be the dai for display port. Without this set properly we
fail to get audio routed through external displays on trogdor. It looks
like we picked up v4[1] of this patch when there was a v7[2]. The v7
patch still had the wrong sound-dai but at least we can fix all this up
and audio works.
Cc: Srinivasa Rao Mandadapu <srivasam@qti.qualcomm.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Fixes: b22d313e17 ("arm64: dts: qcom: sc7180-trogdor: Add lpass dai link for HDMI")
Link: https://lore.kernel.org/r/20210721080549.28822-3-srivasam@qti.qualcomm.com [1]
Link: https://lore.kernel.org/r/20210726120910.20335-3-srivasam@codeaurora.org [2]
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210811224141.1110495-1-swboyd@chromium.org
The legacy clock names (including the _clk suffix) was dropped from the
driver, so update the dts accordingly).
Tested on Nexus 7 2013, no functional changes.
Signed-off-by: David Heidelberg <david@ixit.cz>
[bjorn: Updated commit message]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210829133918.57780-2-david@ixit.cz
The Qualcomm Secure Channel Manager (SCM) is only present on Qualcomm
SoCs. All drivers using it select QCOM_SCM, and depend on ARCH_QCOM.
Until recently, QCOM_SCM was an invisible symbol, but this was changed
by adding loadable module support, exposing it to all ARM and ARM64
users. Hence add a dependency on ARCH_QCOM, to prevent asking the user
about this driver when configuring a kernel without Qualcomm SoC
support.
While at it, drop the dependency on ARM || ARM64, as that is implied by
HAVE_ARM_SMCCC.
Fixes: b42000e4b8 ("firmware: qcom_scm: Allow qcom_scm driver to be loadable as a permenent module")
Fixes: 2954a6f12f ("firmware: qcom-scm: Fix QCOM_SCM configuration")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/5cda77085c07dc2e8d2195507b287457cb2f09e9.1629807831.git.geert+renesas@glider.be
PT_LOAD type denotes that the segment should be loaded into the final
firmware memory region. Hash segment is not one such, because it's only
needed for PAS init and shouldn't be in the final firmware memory region.
That's why mdt_phdr_valid() explicitly reject non PT_LOAD segment and
hash segment. This actually makes the hash segment type check in
qcom_mdt_read_metadata() unnecessary and redundant. For a hash segment,
it won't be loaded into firmware memory region anyway, due to the
QCOM_MDT_TYPE_HASH check in mdt_phdr_valid(), even if it has a PT_LOAD
type for some reason (misusing or abusing?).
Some firmware files on Sony phones are such examples, e.g WCNSS firmware
of Sony Xperia M4 Aqua phone. The type of hash segment is just PT_LOAD.
Drop the unnecessary hash segment type check in qcom_mdt_read_metadata()
to fix firmware loading failure on these phones, while hash segment is
still kept away from the final firmware memory region.
Fixes: 498b98e939 ("soc: qcom: mdt_loader: Support loading non-split images")
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210828070202.7033-1-shawn.guo@linaro.org
Upstream commit 2e01e0c214 ("arm64: dts: qcom: sdm850-yoga:
Enable IPA") shuffled reserved memory regions in sdm845.dtsi
to make firmware loading succeed and enable the ipa device on
sdm845-yoga but it broke the other common users of those
memory regions like Xiaomi Pocophone F1.
So this patch effectively revert those upstream commit changes
and move all the relevant changes to sdm850-lenovo-yoga-c630.dts
instead.
Fixes: 2e01e0c214 ("arm64: dts: qcom: sdm850-yoga: Enable IPA")
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210916200554.2434439-1-amit.pundir@linaro.org
The 'motherboard-bus' node in Arm Ltd boards fails schema checks as
'simple-bus' child nodes must have a unit-address. The 'ranges' handling is
also wrong (or at least strange) as the mapping of SMC chip selects should
be in the 'arm,vexpress,v2m-p1' node rather than a generic 'simple-bus'
node. Either there's 1 too many levels of 'simple-bus' nodes or 'ranges'
should be moved down a level. The latter change is more simple, so let's do
that. As the 'ranges' value doesn't vary for a given motherboard instance,
we can move 'ranges' into the motherboard dtsi files.
Link: https://lore.kernel.org/r/20210819184239.1192395-6-robh@kernel.org
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
- Fixes for newly introduced SAMA7G5 and its Power Management code.
Associated core peripherals need to be instantiated in DT for
benefiting from best PM support like Backup mode with DDR in
Self-Refresh.
- Add chip ID for SAMA7G5 for easing the kernel log identification.
- Avoid Camera Sensor probe error on sama5d27 som1 ek board.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYUDJYQAKCRAfOrpwrNPN
DAAEAQCFIBeK4ll4yXwioU+4hX7RjP/wx5rKJjwGQOx7cHctyAEAz2951P5K6erg
6+qE4ZnsUjlo+6XeOTIuQouz57aKGwk=
=vVRX
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFAz0EACgkQmmx57+YA
GNkapw/+KziVcbfva3GAWfYA10MuJPLg8EAtC8x9Q6knOWmxmg7apZS/zm4F9+ej
T5EVsW6OcTQUexV6LMiB9JAB2jaawtF2wGzP2KIZdtz9YCYrTxsCTmXQoc/Yccmi
CoBMYzkDq04i+y+SBBFFifUOUPWlEnH92wwGAnN+NvUeT2W7RAinwqf8ZtVrRTOk
VFmjiKYhsHy2rj9huhNIm2v4na/ay/3Lun7gS1cKnNvfV5X4ua0duswnf4w5j1TD
QHtkWTQ5/q4AZpXAbUwURNZ7p7Qq6yQE4OVAP3lCVMPmwArUHKRrah42IDwik1Ou
7KrVLMyq2BsGGu1vwHT2s1RGGpIHqs2IXv/WMRSBs6VweU9DEOmuRFg+pEYyzBcL
Q/wxarJY7uyJVcUbLj5j5t8qJXdJAcc3vwdVh8uD5jQIT9Ks+CESfMnu/C+KuYx/
cuTffJyfrzRKJN7gg6BxMby865XsEgKTWYqg/NS4X+YSzBRiP6UytsjK1xQ5L8Ac
UnW66w7BpmLfvFngOhzF9zD3P0Yad9lyCYySlemKTDHkcFYPBWwGYSfTocc/z4Zg
WgOlQbUvX+C8LHH0yactzaTb1BUb03DXVja4GUwwYd3AYOi8sc9JXEunnoKBkVBh
xr4VaIoo6PKQtUQNTgUyjciBCi3scWP4axHtAcq73P2gbEnyL6c=
=C+No
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
AT91 fixes#1 for 5.15:
- Fixes for newly introduced SAMA7G5 and its Power Management code.
Associated core peripherals need to be instantiated in DT for
benefiting from best PM support like Backup mode with DDR in
Self-Refresh.
- Add chip ID for SAMA7G5 for easing the kernel log identification.
- Avoid Camera Sensor probe error on sama5d27 som1 ek board.
* tag 'at91-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama5d2_som1_ek: disable ISC node by default
ARM: at91: pm: switch backup area to vbat in backup mode
ARM: dts: at91: sama7g5: add chipid
ARM: dts: at91: sama7g5: add shdwc node
ARM: dts: at91: sama7g5: add securam node
ARM: dts: at91: sama7g5: add ram controllers
ARM: at91: pm: do not panic if ram controllers are not enabled
Link: https://lore.kernel.org/r/20210914162314.54347-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As proposed by Daniel, I am going to help him to maintain the platform,
so add myself as co-maintainer.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Daniel Palmer <daniel@thingy.jp>
Link: https://lore.kernel.org/r/20210910190322.27058-5-romain.perier@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Without a sensor node, the ISC will simply fail to probe, as the
corresponding port node is missing.
It is then logical to disable the node in the devicetree.
If we add a port with a connection to a sensor endpoint, ISC can be enabled.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210902121358.503589-1-eugen.hristev@microchip.com
Backup area is now switched to VDDIN33 at boot (with the help of
bootloader). When switching to backup mode we need to switch backup area
to VBAT as all the other power sources are cut off. The resuming from
backup mode is done with the help of bootloader, so there is no need to
do something particular in Linux to restore backup area power source.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210830100927.22711-1-claudiu.beznea@microchip.com
In case PM is enabled but there is no RAM controller information
in DT the code will panic. Avoid such scenarios by not initializing
platform specific PM code in case RAM controller is not provided
via DT.
Reported-by: Eugen Hristev <eugen.hristev@microchip.com>
Fixes: 827de1f123 ("ARM: at91: remove at91_dt_initialize and machine init_early()")
Fixes: 892e1f4a3a ("ARM: at91: pm: add sama7g5 ddr phy controller")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210823131915.23857-2-claudiu.beznea@microchip.com
DRM_FBDEV_EMULATION previously selected FB and was default y as long as DRM
was enabled. In commit f611b1e762 ("drm: Avoid circular dependencies for
CONFIG_FB") the select was replaced with a depends on FB, disabling the
drivers that depended on it.
Renable FB so we get back FB_EFI, FB_WM8505, FB_SH_MOBILE_LCDC, FB_SIMPLE and
VIDEO_VIVID.
It must be set to y and not a module as the test driver VIDEO_VIVID
requires it to be built in.
Link: https://lore.kernel.org/r/CAK8P3a18EdBKQdGDOZc9cPKsf=hY8==v2cO0DBE_tyd82Uq-Ng@mail.gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some drivers have not been built as they gained dependencies in kconfig but those
dependencies were not added to the defconfig.
The MSM pinctrl drivers fell out of the defconfig as of commit be117ca322
("pinctrl: qcom: Kconfig: Rework PINCTRL_MSM to be a depenency rather then a
selected config"). Add PINCTRL_MSM so these stay enabled.
EDAC depends on RAS, so enable it to ensure the EDAC drivers stay
enabled.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Based on 'ranges', the 'bus@4000000' node unit-address is off by 1 '0'.
Link: https://lore.kernel.org/r/20210819184239.1192395-5-robh@kernel.org
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Drop the '#interrupt-cells' property in the motherboard node which has no
effect as the node is neither an interrupt-controller or interrupt-map
(that's in the parent node).
Drop 'model' as it is not used by software nor documented.
Drop 'arm,v2m-memory-map' as it is not used by software. The purpose was
to describe which memory map, but that's all described by the DT
already.
Link: https://lore.kernel.org/r/20210819184239.1192395-4-robh@kernel.org
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The arm,mhu bindings and driver do not define interrupt-names, so drop
the property to fix warnings:
arch/arm64/boot/dts/arm/juno-r2.dt.yaml: mhu@2b1f0000: 'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+'
Link: https://lore.kernel.org/r/20210820081733.83976-3-krzysztof.kozlowski@canonical.com
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Align the watchdog and mmc device node names with the schema to fix
warnings like:
mmci@50000: $nodename:0: 'mmci@50000' does not match '^mmc(@.*)?$'
wdt@f0000: $nodename:0: 'wdt@f0000' does not match '^watchdog(@.*|-[0-9a-f])?$'
Link: https://lore.kernel.org/r/20210820081733.83976-2-krzysztof.kozlowski@canonical.com
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Align the watchdog and mmc device node names with the schema to fix
warnings like:
mmci@50000: $nodename:0: 'mmci@50000' does not match '^mmc(@.*)?$'
wdt@f0000: $nodename:0: 'wdt@f0000' does not match '^watchdog(@.*|-[0-9a-f])?$'
Link: https://lore.kernel.org/r/20210820081733.83976-1-krzysztof.kozlowski@canonical.com
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
sizeof when applied to a pointer typed expression gives the size of
the pointer.
./drivers/tee/optee/shm_pool.c:38:28-34: ERROR application of sizeof to pointer
This issue was detected with the help of Coccinelle.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: jing yangyang <jing.yangyang@zte.com.cn>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The 28NM DSI PLL driver for msm8960 calculates with a 27MHz reference
clock and should hence use PXO, not CXO which runs at 19.2MHz.
Note that none of the DSI PHY/PLL drivers currently use this "ref"
clock; they all rely on (sometimes inexistant) global clock names and
usually function normally without a parent clock. This discrepancy will
be corrected in a future patch, for which this change needs to be in
place first.
Fixes: 6969d1d9c6 ("ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20210829203027.276143-2-marijn.suijten@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Also resolves these kernel warnings for APQ8064:
adreno 4300000.adreno-3xx: Using legacy qcom,chipid binding!
adreno 4300000.adreno-3xx: Use compatible qcom,adreno-320.2 instead.
Tested on Nexus 7 2013, no functional changes.
Cc: <stable@vger.kernel.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20210818065317.19822-1-david@ixit.cz
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Set qcom_socinfo pointer as data being stored instead of pointer
to soc_device structure. Aligns with future calls to platform_get_data()
which expects qcom_socinfo pointer.
Fixes: efb448d0a3 ("soc: qcom: Add socinfo driver")
Signed-off-by: Antonio Martorana <amartora@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1629159879-95777-1-git-send-email-amartora@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The simple-panel driver already has hard-coded timings for
"arm,rtsm-display", and as such screams at us for trying to override a
fixed mode from DT. Since the exact values probably don't matter all
that much anyway, just remove the DT node to keep boot quiet.
Link: https://lore.kernel.org/r/2701c187cf8e0762df38f68cc069ec2c29a3b5a9.1626283322.git.robin.murphy@arm.com
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
- Add missing fields and remove some duplicate fields when printing a perf_event_attr.
- Fix hybrid config terms list corruption.
- Update kernel header copies, some resulted in new kernel features being
automagically added to 'perf trace' syscall/tracepoint argument id->string translators.
- Add a file generated during the documentation build to .gitignore.
- Add an option to build without libbfd, as some distros, like Debian consider
its ABI unstable.
- Add support to print a textual representation of IBS raw sample data in 'perf report'.
- Fix bpf 'perf test' sample mismatch reporting
- Fix passing arguments to stackcollapse report in a 'perf script' python script.
- Allow build-id with trailing zeros.
- Look for ImageBase in PE file to compute .text offset.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYT0+hwAKCRCyPKLppCJ+
JxcPAQDO+iCKK/sF3TVN8f0T8xkFD6y8krBXPAtQHCAhVBeiqAD9F4R0VMX6nwy3
8rJnsNd2ODjywgFBO4uPy0N2fxBWjwo=
=/hH1
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Add missing fields and remove some duplicate fields when printing a
perf_event_attr.
- Fix hybrid config terms list corruption.
- Update kernel header copies, some resulted in new kernel features
being automagically added to 'perf trace' syscall/tracepoint argument
id->string translators.
- Add a file generated during the documentation build to .gitignore.
- Add an option to build without libbfd, as some distros, like Debian
consider its ABI unstable.
- Add support to print a textual representation of IBS raw sample data
in 'perf report'.
- Fix bpf 'perf test' sample mismatch reporting
- Fix passing arguments to stackcollapse report in a 'perf script'
python script.
- Allow build-id with trailing zeros.
- Look for ImageBase in PE file to compute .text offset.
* tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits)
tools headers UAPI: Update tools's copy of drm.h headers
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync linux/fs.h with the kernel sources
tools headers UAPI: Sync linux/in.h copy with the kernel sources
perf tools: Add an option to build without libbfd
perf tools: Allow build-id with trailing zeros
perf tools: Fix hybrid config terms list corruption
perf tools: Factor out copy_config_terms() and free_config_terms()
perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields
perf tools: Ignore Documentation dependency file
perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions
tools include UAPI: Update linux/mount.h copy
perf beauty: Cover more flags in the move_mount syscall argument beautifier
tools headers UAPI: Sync linux/prctl.h with the kernel sources
tools include UAPI: Sync sound/asound.h copy with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
perf report: Add support to print a textual representation of IBS raw sample data
perf report: Add tools/arch/x86/include/asm/amd-ibs.h
perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings
...
