DT schema expects TLMM pin configuration nodes to be named with '-state'
suffix and their optional children with '-pins' suffix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220912061746.6311-40-krzysztof.kozlowski@linaro.org
DT schema expects TLMM pin configuration nodes to be named with '-state'
suffix and their optional children with '-pins' suffix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220912061746.6311-39-krzysztof.kozlowski@linaro.org
DT schema expects TLMM pin configuration nodes to be named with '-state'
suffix and their optional children with '-pins' suffix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220912061746.6311-38-krzysztof.kozlowski@linaro.org
DT schema expects TLMM pin configuration nodes to be named with '-state'
suffix and their optional children with '-pins' suffix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220912061746.6311-36-krzysztof.kozlowski@linaro.org
DT schema expects TLMM pin configuration nodes to be named with '-state'
suffix and their optional children with '-pins' suffix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220912061746.6311-35-krzysztof.kozlowski@linaro.org
Fix the DMIC no sound issue of villager-r1 by using "PP1800_L2C" as the
DMIC power source to match the hardware schematic.
This patch:
1. set vdd-micb-supply to PP1800_L2C as the MIC Bias voltage regulator.
2. In audio-routing, set VA DMIC01~VA DMIC03 to use the vdd-micb-supply
setting.
Co-developed-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220826065621.2255795-1-judyhsiao@chromium.org
SC7280 has VA, TX and RX macros with SoundWire Controllers to attach with
external codecs using soundwire masters. Add these nodes for sc7280 based
platforms audio use case.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1657200184-29565-2-git-send-email-quic_srivasam@quicinc.com
Support external mclk to interface external MI2S clocks for SC7280.
Fixes: 4185b27b3b ("dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7280")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1662005846-4838-5-git-send-email-quic_c_skakit@quicinc.com
Add support for LPASS audio clock gating for RX/TX/SWA core bus clocks
for SC7280. Update reg property min/max items in YAML schema.
Fixes: 4185b27b3b ("dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7280")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1662005846-4838-4-git-send-email-quic_c_skakit@quicinc.com
When this property is set, the remoteproc is used to boot the
LPASS and therefore lpass_q6ss_ahbm_clk and lpass_q6ss_ahbs_clk
clocks would be used to bring LPASS out of reset and the rest of
the lpass clocks would be controlled directly by the remoteproc.
This is a cleanup done to handle overlap of regmap of
lpasscc and lpass_aon blocks.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1662005846-4838-2-git-send-email-quic_c_skakit@quicinc.com
This adds sc7280-herobrine-villager-r1.dts for villager device tree files.
Herobrine-r1 is exactly the same as -r0 except that it uses a
different audio solution (it uses the same one as the CRD).
Signed-off-by: Jimmy Chen <jinghung.chen3@hotmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/SG2PR03MB500667CFE3F5F59585F8BA77CC949@SG2PR03MB5006.apcprd03.prod.outlook.com
The 'snps,ptp-ref-clk-rate' and 'snps,ptp-req-clk-rate' properties
are not supported by the stmmac driver currently, so remove
them from the sa8155p-adp ethernet node as well.
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220907204153.2039776-1-bhupesh.sharma@linaro.org
Correct CPU BWMON unit address to match the "reg" property.
Reported-by: Stephen Boyd <swboyd@chromium.org>
Fixes: b2f3eac1b7 ("arm64: dts: qcom: sc7280: Add cpu and llcc BWMON")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220908085830.39141-1-krzysztof.kozlowski@linaro.org
Commit eeca7d4621 ("arm64: dts: qcom: pm8350c: Drop PWM reg declaration")
dropped PWM reg declaration for pm8350c pwm(s), but there is a leftover
'reg' entry inside the lpg/pwm node in sc8280xp dts file. Remove the same.
While at it, also remove the unused unit address in the node
label.
Also, since dt-bindings expect LPG/PWM node name to be "pwm",
use correct node name as well, to fix the following
error reported by 'make dtbs_check':
'lpg' does not match any of the regexes
Fixes: eeca7d4621 ("arm64: dts: qcom: pm8350c: Drop PWM reg declaration")
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220905070240.1634997-1-bhupesh.sharma@linaro.org
The PM7250B is primarily used for charger and fuel gauge on Fairphone 4
but also has some thermal zones that we can configure already.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220902111055.106814-3-luca.weiss@fairphone.com
PM7250B is a PMIC primarily used for charging and fuel gauge but also
has some of the standard functionality like temp-alarm, adc, etc.
Add the .dtsi with some of the functionality added.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220902111055.106814-2-luca.weiss@fairphone.com
Some recent changes that added new syscon nodes used misspelled node names.
Fixes: 86d7c9460e arm64: dts: qcom: sm8150: split TCSR halt regs out of mutex
Fixes: 0da6033872 arm64: dts: qcom: sdm630: split TCSR halt regs out of mutex
Fixes: 8a8531e69b arm64: dts: qcom: sdm845: split TCSR halt regs out of mutex
Fixes: d9a2214d6b arm64: dts: qcom: sc7280: split TCSR halt regs out of mutex
Fixes: ce1ac53c7f arm64: dts: qcom: sc7180: split TCSR halt regs out of mutex
Fixes: fc10cfa385 arm64: dts: qcom: msm8998: split TCSR halt regs out of mutex
Fixes: 100ce22059 arm64: dts: qcom: msm8996: split TCSR halt regs out of mutex
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220905091602.20364-1-johan+linaro@kernel.org
The primary and secondary USB controllers can be used to wake the system
from suspend so mark them accordingly.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Tested-by: Steev Klimaszewski <steev@kali.org> #Lenovo Thinkpad X13s
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220902081652.12631-1-johan+linaro@kernel.org
Add cpu and llcc BWMON nodes and their corresponding
OPP tables for sc7280 SoC.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220902043511.17130-5-quic_rjendra@quicinc.com
The PMIC's VADC property for settle time is qcom,hw-settle-time, not
qcom,hw-settle-time-us. The latter is used in PMIC's TM ADC.
qcom/sdm845-mtp.dtb: pmic@0: adc@3100:adc-chan@4c: 'qcom,hw-settle-time-us' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: d5e12f3823 ("arm64: dts: qcom: sdm845: mtp: Add vadc channels and thermal zones")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220828084341.112146-13-krzysztof.kozlowski@linaro.org
Correct SPMI PMIC VADC channel node name:
1. Use hyphens instead of underscores,
2. Add missing unit address.
This fixes `make dtbs_check` warnings like:
qcom/sc7280-idp.dtb: pmic@0: adc@3100: 'pmk8350_die_temp', 'pmr735a_die_temp' do not match any of the regexes: '^.*@[0-9a-f]+$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220828084341.112146-12-krzysztof.kozlowski@linaro.org
DT schema expects PMIC GPIO pin configuration nodes to be named with
'-state' suffix:
qcom/sc7280-herobrine-crd.dtb: pmic@2: gpio@8800: 'edp-bl-reg-en' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220828084341.112146-11-krzysztof.kozlowski@linaro.org
Bindings expect Power-on node name to be "pon":
'power-on@800' do not match any of the regexes
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220828084341.112146-10-krzysztof.kozlowski@linaro.org
Bindings expect LPG/PWM node name to be "pwm":
pmic@5: 'lpg' does not match any of the regexes
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220828084341.112146-9-krzysztof.kozlowski@linaro.org
Bindings expect regulators node name to be "regulators":
qcom/sdm630-sony-xperia-nile-voyager.dtb: pmic@3: 'pm660l-regulators' does not match any of the regexes
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220828084341.112146-8-krzysztof.kozlowski@linaro.org
Bindings expect VADC node name to be "adc":
pmic@0: 'vadc@3100' does not match any of the regexes
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220828084341.112146-7-krzysztof.kozlowski@linaro.org
The SPMI PMIC VADC and Thermal Monitoring ADC have only one interrupt
line and their bindings do not allow interrupt-names. None of other
variants use them, so drop it from DTSI.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220828084341.112146-6-krzysztof.kozlowski@linaro.org
Since commit 044b32fa52 ("dt-bindings:iio:qcom-spmi-vadc drop
incorrect io-channel-ranges from example") the io-channel-ranges are not
allowed in the Qualcomm SPMI PMIC ADC and anyway they are not correct
for IIO provider.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220828084341.112146-5-krzysztof.kozlowski@linaro.org
