This is needed in order to allow the NFSv4.1 backchannel and
BIND_CONN_TO_SESSION function to work.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This is a pre-patch for the RPC multipath code. It sets up the storage in
struct rpc_clnt for the multipath code.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
In order to support multipathing/trunking we will need the ability to
track multiple transports. This patch sets up a basic structure for
doing so.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The PCI flag management constants and functions were previously declared in
include/asm-generic/pci-bridge.h. But they are not specific to bridges,
and arches did not include pci-bridge.h consistently.
Move the following interfaces and related constants to include/linux/pci.h
and remove pci-bridge.h:
pci_set_flags()
pci_add_flags()
pci_clear_flags()
pci_has_flag()
This fixes these warnings when building for some arches:
drivers/pci/host/pcie-designware.c:562:20: error: 'PCI_PROBE_ONLY' undeclared (first use in this function)
drivers/pci/host/pcie-designware.c:562:7: error: implicit declaration of function 'pci_has_flag' [-Werror=implicit-function-declaration]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
LP872x regulators are made active via the EN pin, which might be hooked to a
GPIO. This adds support for driving the GPIO high when the driver is in use.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch support for VBUS detection by using GPIO pin.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
When a storage device rejects a WRITE SAME command we will disable write
same functionality for the device and return -EREMOTEIO to the block
layer. -EREMOTEIO will in turn prevent DM from retrying the I/O and/or
failing the path.
Yiwen Jiang discovered a small race where WRITE SAME requests issued
simultaneously would cause -EIO to be returned. This happened because
any requests being prepared after WRITE SAME had been disabled for the
device caused us to return BLKPREP_KILL. The latter caused the block
layer to return -EIO upon completion.
To overcome this we introduce BLKPREP_INVALID which indicates that this
is an invalid request for the device. blk_peek_request() is modified to
return -EREMOTEIO in that case.
Reported-by: Yiwen Jiang <jiangyiwen@huawei.com>
Suggested-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Reviewed-by: Ewan Milne <emilne@redhat.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The preprocessor magic used for setting the default cpufreq governor
(and for using the performance governor as a fallback one for that
matter) is really nasty, so replace it with __weak functions and
overrides.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Saravana Kannan <skannan@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Empty request_redirect_t (struct ceph_request_redirect in the kernel
client) is now encoded with a bool. NEW_OSDOPREPLY_ENCODING feature
bit overlaps with already supported CRUSH_TUNABLES5.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Add TUNABLES5 feature (chooseleaf_stable tunable) to a set of features
supported by default.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Add a tunable to fix the bug that chooseleaf may cause unnecessary pg
migrations when some device fails.
Reflects ceph.git commit fdb3f664448e80d984470f32f04e2e6f03ab52ec.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
System block allows the device to initialize with its configured media
manager. The system blocks is written to disk, and read again when media
manager is determined. For this to work, the backend must store the
data. Device drivers, such as null_blk, does not have any backend
storage. This patch allows the media manager to be initialized without a
storage backend.
It also fix incorrect configuration of capabilities in null_blk, as it
does not support get/set bad block interface.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The fixes are:
- fix indentation of a comment
- fix a typo in the comment about bulk_cb_wrap.Length
- make comment about US_BULK_CB_SIGN look like the one about
US_BULK_CS_SIGN below
- make the comment about bulk_cs_wrap.Signature look more like the one
about bulk_cb_wrap.Signature
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
232275a USB: fix substandard locking for the sysfs files
introduced needed locking into sysfs operations on USB devices
It, however, uses uninterruptible sleep and if the error
handling is on extreme cases of sleep lengths of 10s of seconds
are possible. Unless we are removing the device we should use
interruptible sleep.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB bus numbering is based on directly dealing with bitmaps and
defines a separate list of busses.
This can be simplified and unified by using existing idr functionality.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge fixes from Andrew Morton:
"18 fixes"
[ The 18 fixes turned into 17 commits, because one of the fixes was a
fix for another patch in the series that I just folded in by editing
the patch manually - hopefully correctly - Linus ]
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: fix memory leak in copy_huge_pmd()
drivers/hwspinlock: fix race between radix tree insertion and lookup
radix-tree: fix race in gang lookup
mm/vmpressure.c: fix subtree pressure detection
mm: polish virtual memory accounting
mm: warn about VmData over RLIMIT_DATA
Documentation: cgroup-v2: add memory.stat::sock description
mm: memcontrol: drop superfluous entry in the per-memcg stats array
drivers/scsi/sg.c: mark VMA as VM_IO to prevent migration
proc: revert /proc/<pid>/maps [stack:TID] annotation
numa: fix /proc/<pid>/numa_maps for hugetlbfs on s390
MAINTAINERS: update Seth email
ocfs2/cluster: fix memory leak in o2hb_region_release
lib/test-string_helpers.c: fix and improve string_get_size() tests
thp: limit number of object to scan on deferred_split_scan()
thp: change deferred_split_count() to return number of THP in queue
thp: make split_queue per-node
- Fix build error with *_OF_DECLARE() when used in modules
- Add missing platform maintainers for dts files in MAINTAINERS
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=rXlf
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree fixes from Rob Herring:
- Fix build error with *_OF_DECLARE() when used in modules
- Add missing platform maintainers for dts files in MAINTAINERS
* tag 'devicetree-fixes-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: drop symbols declared by _OF_DECLARE() from modules
MAINTAINERS: Add missing platform maintainers for dts files
If the indirect_ptr bit is set on a slot, that indicates we need to redo
the lookup. Introduce a new function radix_tree_iter_retry() which
forces the loop to retry the lookup by setting 'slot' to NULL and
turning the iterator back to point at the problematic entry.
This is a pretty rare problem to hit at the moment; the lookup has to
race with a grow of the radix tree from a height of 0. The consequences
of hitting this race are that gang lookup could return a pointer to a
radix_tree_node instead of a pointer to whatever the user had inserted
in the tree.
Fixes: cebbd29e1c ("radix-tree: rewrite gang lookup using iterator")
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* add VM_STACK as alias for VM_GROWSUP/DOWN depending on architecture
* always account VMAs with flag VM_STACK as stack (as it was before)
* cleanup classifying helpers
* update comments and documentation
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
MEM_CGROUP_STAT_NSTATS is just a delimiter for cgroup1 statistics, not
an actual array entry. Reuse it for the first cgroup2 stat entry, like
in the event array.
Fixes: b2807f07f4 ("mm: memcontrol: add "sock" to cgroup2 memory.stat")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit b76437579d ("procfs: mark thread stack correctly in
proc/<pid>/maps") added [stack:TID] annotation to /proc/<pid>/maps.
Finding the task of a stack VMA requires walking the entire thread list,
turning this into quadratic behavior: a thousand threads means a
thousand stacks, so the rendering of /proc/<pid>/maps needs to look at a
million combinations.
The cost is not in proportion to the usefulness as described in the
patch.
Drop the [stack:TID] annotation to make /proc/<pid>/maps (and
/proc/<pid>/numa_maps) usable again for higher thread counts.
The [stack] annotation inside /proc/<pid>/task/<tid>/maps is retained, as
identifying the stack VMA there is an O(1) operation.
Siddesh said:
"The end users needed a way to identify thread stacks programmatically and
there wasn't a way to do that. I'm afraid I no longer remember (or have
access to the resources that would aid my memory since I changed
employers) the details of their requirement. However, I did do this on my
own time because I thought it was an interesting project for me and nobody
really gave any feedback then as to its utility, so as far as I am
concerned you could roll back the main thread maps information since the
information is available in the thread-specific files"
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: Shaohua Li <shli@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The function efi_query_variable_store() may be invoked by
efivar_entry_set_nonblocking(), which itself takes care to only
call a non-blocking version of the SetVariable() runtime
wrapper. However, efi_query_variable_store() may call the
SetVariable() wrapper directly, as well as the wrapper for
QueryVariableInfo(), both of which could deadlock in the same
way we are trying to prevent by calling
efivar_entry_set_nonblocking() in the first place.
So instead, modify efi_query_variable_store() to use the
non-blocking variants of QueryVariableInfo() (and give up rather
than free up space if the available space is below
EFI_MIN_RESERVE) if invoked with the 'nonblocking' argument set
to true.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1454364428-494-5-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This introduces a new runtime wrapper for the
QueryVariableInfo() UEFI Runtime Service, which gives up
immediately rather than spins on failure to grab the efi_runtime
spinlock.
This is required in the non-blocking path of the efi-pstore
code.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1454364428-494-4-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is no need for a separate nonblocking prototype definition
for the SetVariable() UEFI Runtime Service, since it is
identical to the blocking version.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1454364428-494-3-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For CONFIG_KALLSYMS, we keep two symbol tables and two string tables.
There's one full copy, marked SHF_ALLOC and laid out at the end of the
module's init section. There's also a cut-down version that only
contains core symbols and strings, and lives in the module's core
section.
After module init (and before we free the module memory), we switch
the mod->symtab, mod->num_symtab and mod->strtab to point to the core
versions. We do this under the module_mutex.
However, kallsyms doesn't take the module_mutex: it uses
preempt_disable() and rcu tricks to walk through the modules, because
it's used in the oops path. It's also used in /proc/kallsyms.
There's nothing atomic about the change of these variables, so we can
get the old (larger!) num_symtab and the new symtab pointer; in fact
this is what I saw when trying to reproduce.
By grouping these variables together, we can use a
carefully-dereferenced pointer to ensure we always get one or the
other (the free of the module init section is already done in an RCU
callback, so that's safe). We allocate the init one at the end of the
module init section, and keep the core one inside the struct module
itself (it could also have been allocated at the end of the module
core, but that's probably overkill).
Reported-by: Weilong Chen <chenweilong@huawei.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111541
Cc: stable@kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Pull networking fixes from David Miller:
"This looks like a lot but it's a mixture of regression fixes as well
as fixes for longer standing issues.
1) Fix on-channel cancellation in mac80211, from Johannes Berg.
2) Handle CHECKSUM_COMPLETE properly in xt_TCPMSS netfilter xtables
module, from Eric Dumazet.
3) Avoid infinite loop in UDP SO_REUSEPORT logic, also from Eric
Dumazet.
4) Avoid a NULL deref if we try to set SO_REUSEPORT after a socket is
bound, from Craig Gallek.
5) GRO key comparisons don't take lightweight tunnels into account,
from Jesse Gross.
6) Fix struct pid leak via SCM credentials in AF_UNIX, from Eric
Dumazet.
7) We need to set the rtnl_link_ops of ipv6 SIT tunnels before we
register them, otherwise the NEWLINK netlink message is missing
the proper attributes. From Thadeu Lima de Souza Cascardo.
8) Several Spectrum chip bug fixes for mlxsw switch driver, from Ido
Schimmel
9) Handle fragments properly in ipv4 easly socket demux, from Eric
Dumazet.
10) Don't ignore the ifindex key specifier on ipv6 output route
lookups, from Paolo Abeni"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (128 commits)
tcp: avoid cwnd undo after receiving ECN
irda: fix a potential use-after-free in ircomm_param_request
net: tg3: avoid uninitialized variable warning
net: nb8800: avoid uninitialized variable warning
net: vxge: avoid unused function warnings
net: bgmac: clarify CONFIG_BCMA dependency
net: hp100: remove unnecessary #ifdefs
net: davinci_cpdma: use dma_addr_t for DMA address
ipv6/udp: use sticky pktinfo egress ifindex on connect()
ipv6: enforce flowi6_oif usage in ip6_dst_lookup_tail()
netlink: not trim skb for mmaped socket when dump
vxlan: fix a out of bounds access in __vxlan_find_mac
net: dsa: mv88e6xxx: fix port VLAN maps
fib_trie: Fix shift by 32 in fib_table_lookup
net: moxart: use correct accessors for DMA memory
ipv4: ipconfig: avoid unused ic_proto_used symbol
bnxt_en: Fix crash in bnxt_free_tx_skbs() during tx timeout.
bnxt_en: Exclude rx_drop_pkts hw counter from the stack's rx_dropped counter.
bnxt_en: Ring free response from close path should use completion ring
net_sched: drr: check for NULL pointer in drr_dequeue
...
Pull libnvdimm fixes from Dan Williams:
"1/ Fixes to the libnvdimm 'pfn' device that establishes a reserved
area for storing a struct page array.
2/ Fixes for dax operations on a raw block device to prevent pagecache
collisions with dax mappings.
3/ A fix for pfn_t usage in vm_insert_mixed that lead to a null
pointer de-reference.
These have received build success notification from the kbuild robot
across 153 configs and pass the latest ndctl tests"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
phys_to_pfn_t: use phys_addr_t
mm: fix pfn_t to page conversion in vm_insert_mixed
block: use DAX for partition table reads
block: revert runtime dax control of the raw block device
fs, block: force direct-I/O for dax-enabled block devices
devm_memremap_pages: fix vmem_altmap lifetime + alignment handling
libnvdimm, pfn: fix restoring memmap location
libnvdimm: fix mode determination for e820 devices
Device Support
* ad5761
- new driver
* at91_sama5d2 ADC.
- new driver and MAINTAINERS entry.
- minor cleanups followed.
* atlas pH-SM
- new driver (this has possibly the prettiest data sheet I've ever seen)
* mcp3422
- mcp3425 ADC added.
* mcp4725
- mcp4726 DAC added.
* mma8452
- mma8451q accelerometer added.
* mpl115
- mpl115a1 added (a lot bigger than it seems as this is an SPI part whereas
previous parts were i2c).
* si7005
- Hoperf th02 (seems to be a repackaged part)
* si7020
- Hoperf th06 (seems to be a repackaged part)
New features
* Core
- IIO_PH type. Does what it says on the tin.
* max30100
- LED current configuration support.
* mcp320x
- more differential measurement combinations.
* mma8452
- free fall deteciton
- opt3001
- enable operation without a IRQ line.
- device tree docs. Somehow the original docs have disappeared down
a rabbit hole, so here is a new set.
* st-sensors
- Support active-low interrupts.
Cleanups and minor / not so minor reworks
* Documentation
- drop some defunct ABI from the docs in staging.
* presure / Kconfig
- white space cleanup.
* ad7150
- BIT macro usage
- Alignment fixes
* ad7192
- false indent fixed.
* ak8975
- constify the ak_def structures
* axp288
- drop a redundant double const.
* dht11
- substantial reliability improvements by being more tolerant
of missing start bits.
- simplify the decoding algorithm
* mma8452
- whitespace cleanup
* mpl115
- don't bother setting i2c_client_data as nothing uses it.
* mpu6050
- drop unused function parameter.
* opt3001
- extract integration time as constants.
- trivial refactoring.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=fgTH
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First round of new IIO device support, features and cleanups for the 4.6 cycle.
Device Support
* ad5761
- new driver
* at91_sama5d2 ADC.
- new driver and MAINTAINERS entry.
- minor cleanups followed.
* atlas pH-SM
- new driver (this has possibly the prettiest data sheet I've ever seen)
* mcp3422
- mcp3425 ADC added.
* mcp4725
- mcp4726 DAC added.
* mma8452
- mma8451q accelerometer added.
* mpl115
- mpl115a1 added (a lot bigger than it seems as this is an SPI part whereas
previous parts were i2c).
* si7005
- Hoperf th02 (seems to be a repackaged part)
* si7020
- Hoperf th06 (seems to be a repackaged part)
New features
* Core
- IIO_PH type. Does what it says on the tin.
* max30100
- LED current configuration support.
* mcp320x
- more differential measurement combinations.
* mma8452
- free fall deteciton
- opt3001
- enable operation without a IRQ line.
- device tree docs. Somehow the original docs have disappeared down
a rabbit hole, so here is a new set.
* st-sensors
- Support active-low interrupts.
Cleanups and minor / not so minor reworks
* Documentation
- drop some defunct ABI from the docs in staging.
* presure / Kconfig
- white space cleanup.
* ad7150
- BIT macro usage
- Alignment fixes
* ad7192
- false indent fixed.
* ak8975
- constify the ak_def structures
* axp288
- drop a redundant double const.
* dht11
- substantial reliability improvements by being more tolerant
of missing start bits.
- simplify the decoding algorithm
* mma8452
- whitespace cleanup
* mpl115
- don't bother setting i2c_client_data as nothing uses it.
* mpu6050
- drop unused function parameter.
* opt3001
- extract integration time as constants.
- trivial refactoring.
Here are some small tty/serial driver fixes for 4.5-rc2.
They resolve a number of reported problems (the ioctl one specifically
has been pointed out by numerous people) and one patch adds some new
device ids for the 8250_pci driver. All have been in linux-next
successfully.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlauWWkACgkQMUfUDdst+ykujQCfUSpPMRs3yagM24SI8ITnbEJQ
7H0An0utvQBUhgf10WA7trJ+uyzq4SsQ
=uUEE
-----END PGP SIGNATURE-----
Merge tag 'tty-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty/serial driver fixes for 4.5-rc2.
They resolve a number of reported problems (the ioctl one specifically
has been pointed out by numerous people) and one patch adds some new
device ids for the 8250_pci driver. All have been in linux-next
successfully"
* tag 'tty-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_pci: Add Intel Broadwell ports
staging/speakup: Use tty_ldisc_ref() for paste kworker
n_tty: Fix unsafe reference to "other" ldisc
tty: Fix unsafe ldisc reference via ioctl(TIOCGETD)
tty: Retry failed reopen if tty teardown in-progress
tty: Wait interruptibly for tty lock on reopen
Pull timer fixes from Thomas Gleixner:
"The timer departement delivers:
- a regression fix for the NTP code along with a proper selftest
- prevent a spurious timer interrupt in the NOHZ lowres code
- a fix for user space interfaces returning the remaining time on
architectures with CONFIG_TIME_LOW_RES=y
- a few patches to fix COMPILE_TEST fallout"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/nohz: Set the correct expiry when switching to nohz/lowres mode
clocksource: Fix dependencies for archs w/o HAS_IOMEM
clocksource: Select CLKSRC_MMIO where needed
tick/sched: Hide unused oneshot timer code
kselftests: timers: Add adjtimex SETOFFSET validity tests
ntp: Fix ADJ_SETOFFSET being used w/ ADJ_NANO
itimers: Handle relative timers with CONFIG_TIME_LOW_RES proper
posix-timers: Handle relative timers with CONFIG_TIME_LOW_RES proper
timerfd: Handle relative timers with CONFIG_TIME_LOW_RES proper
hrtimer: Handle remaining time proper for TIME_LOW_RES
clockevents/tcb_clksrc: Prevent disabling an already disabled clock
Pull perf fixes from Thomas Gleixner:
"This is much bigger than typical fixes, but Peter found a category of
races that spurred more fixes and more debugging enhancements. Work
started before the merge window, but got finished only now.
Aside of that this contains the usual small fixes to perf and tools.
Nothing particular exciting"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
perf: Remove/simplify lockdep annotation
perf: Synchronously clean up child events
perf: Untangle 'owner' confusion
perf: Add flags argument to perf_remove_from_context()
perf: Clean up sync_child_event()
perf: Robustify event->owner usage and SMP ordering
perf: Fix STATE_EXIT usage
perf: Update locking order
perf: Remove __free_event()
perf/bpf: Convert perf_event_array to use struct file
perf: Fix NULL deref
perf/x86: De-obfuscate code
perf/x86: Fix uninitialized value usage
perf: Fix race in perf_event_exit_task_context()
perf: Fix orphan hole
perf stat: Do not clean event's private stats
perf hists: Fix HISTC_MEM_DCACHELINE width setting
perf annotate browser: Fix behaviour of Shift-Tab with nothing focussed
perf tests: Remove wrong semicolon in while loop in CQM test
perf: Synchronously free aux pages in case of allocation failure
...
Pull IRQ fixes from Ingo Molnar:
"Mostly irqchip driver fixes, but also an irq core crash fix and a
build fix"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mxs: Add missing set_handle_irq()
irqchip/atmel-aic: Fix wrong bit operation for IRQ priority
irqchip/gic-v3-its: Recompute the number of pages on page size change
base: Export platform_msi_domain_[alloc,free]_irqs
of: MSI: Simplify irqdomain lookup
irqdomain: Allow domain lookup with DOMAIN_BUS_WIRED token
irqchip: Fix dependencies for archs w/o HAS_IOMEM
irqchip/s3c24xx: Mark init_eint as __maybe_unused
genirq: Validate action before dereferencing it in handle_irq_event_percpu()
A dma_addr_t is potentially smaller than a phys_addr_t on some archs.
Don't truncate the address when doing the pfn conversion.
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Matthew Wilcox <willy@linux.intel.com>
[willy: fix pfn_t_to_phys as well]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Avoid populating pagecache when the block device is in DAX mode.
Otherwise these page cache entries collide with the fsync/msync
implementation and break data durability guarantees.
Cc: Jan Kara <jack@suse.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dynamically enabling DAX requires that the page cache first be flushed
and invalidated. This must occur atomically with the change of DAX mode
otherwise we confuse the fsync/msync tracking and violate data
durability guarantees. Eliminate the possibilty of DAX-disabled to
DAX-enabled transitions for now and revisit this for the next cycle.
Cc: Jan Kara <jack@suse.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Similar to the file I/O path, re-direct all I/O to the DAX path for I/O
to a block-device special file. Both regular files and device special
files can use the common filp->f_mapping->host lookup to determing is
DAX is enabled.
Otherwise, we confuse the DAX code that does not expect to find live
data in the page cache:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 7676 at mm/filemap.c:217
__delete_from_page_cache+0x9f6/0xb60()
Modules linked in:
CPU: 0 PID: 7676 Comm: a.out Not tainted 4.4.0+ #276
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
00000000ffffffff ffff88006d3f7738 ffffffff82999e2d 0000000000000000
ffff8800620a0000 ffffffff86473d20 ffff88006d3f7778 ffffffff81352089
ffffffff81658d36 ffffffff86473d20 00000000000000d9 ffffea0000009d60
Call Trace:
[< inline >] __dump_stack lib/dump_stack.c:15
[<ffffffff82999e2d>] dump_stack+0x6f/0xa2 lib/dump_stack.c:50
[<ffffffff81352089>] warn_slowpath_common+0xd9/0x140 kernel/panic.c:482
[<ffffffff813522b9>] warn_slowpath_null+0x29/0x30 kernel/panic.c:515
[<ffffffff81658d36>] __delete_from_page_cache+0x9f6/0xb60 mm/filemap.c:217
[<ffffffff81658fb2>] delete_from_page_cache+0x112/0x200 mm/filemap.c:244
[<ffffffff818af369>] __dax_fault+0x859/0x1800 fs/dax.c:487
[<ffffffff8186f4f6>] blkdev_dax_fault+0x26/0x30 fs/block_dev.c:1730
[< inline >] wp_pfn_shared mm/memory.c:2208
[<ffffffff816e9145>] do_wp_page+0xc85/0x14f0 mm/memory.c:2307
[< inline >] handle_pte_fault mm/memory.c:3323
[< inline >] __handle_mm_fault mm/memory.c:3417
[<ffffffff816ecec3>] handle_mm_fault+0x2483/0x4640 mm/memory.c:3446
[<ffffffff8127eff6>] __do_page_fault+0x376/0x960 arch/x86/mm/fault.c:1238
[<ffffffff8127f738>] trace_do_page_fault+0xe8/0x420 arch/x86/mm/fault.c:1331
[<ffffffff812705c4>] do_async_page_fault+0x14/0xd0 arch/x86/kernel/kvm.c:264
[<ffffffff86338f78>] async_page_fault+0x28/0x30 arch/x86/entry/entry_64.S:986
[<ffffffff86336c36>] entry_SYSCALL_64_fastpath+0x16/0x7a
arch/x86/entry/entry_64.S:185
---[ end trace dae21e0f85f1f98c ]---
Fixes: 5a023cdba5 ("block: enable dax for raw block devices")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Kirill A. Shutemov <kirill@shutemov.name>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Suggested-by: Matthew Wilcox <willy@linux.intel.com>
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
walk_iomem_res_desc() replaced walk_iomem_res() and there is no
caller to walk_iomem_res() any more. Kill it. Also remove @name
from find_next_iomem_res() as it is no longer used.
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Jakub Sitnicki <jsitnicki@gmail.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/1453841853-11383-17-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add a new interface, walk_iomem_res_desc(), which walks through
the iomem table by identifying a target with @flags and @desc.
This interface provides the same functionality as
walk_iomem_res(), but does not use strcmp() to @name for better
efficiency.
walk_iomem_res() is deprecated and will be removed in a later
patch.
Requested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
[ Fixup comments. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Jakub Sitnicki <jsitnicki@gmail.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/1453841853-11383-14-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Change region_intersects() to identify a target with @flags and
@desc, instead of @name with strcmp().
Change the callers of region_intersects(), memremap() and
devm_memremap(), to set IORESOURCE_SYSTEM_RAM in @flags and
IORES_DESC_NONE in @desc when searching System RAM.
Also, export region_intersects() so that the ACPI EINJ error
injection driver can call this function in a later patch.
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jakub Sitnicki <jsitnicki@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/1453841853-11383-13-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
