Disable VF's RX/TX queues, when VIRTCHNL_OP_CONFIG_VSI_QUEUES fail.
Not disabling them might lead to scenario, where PF driver leaves VF
queues enabled, when VF's VSI failed queue config.
In this scenario VF should not have RX/TX queues enabled. If PF failed
to set up VF's queues, VF will reset due to TX timeouts in VF driver.
Initialize iterator 'i' to -1, so if error happens prior to configuring
queues then error path code will not disable queue 0. Loop that
configures queues will is using same iterator, so error path code will
only disable queues that were configured.
Fixes: 77ca27c417 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap")
Suggested-by: Slawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
VLAN filtering features, that is C-Tag and S-Tag, in DVM mode must be
both enabled or disabled.
In case of turning off/on only one of the features, another feature must
be turned off/on automatically with issuing an appropriate message to
the kernel log.
Fixes: 1babaf77f4 ("ice: Advertise 802.1ad VLAN filtering and offloads for PF netdev")
Signed-off-by: Roman Storozhenko <roman.storozhenko@intel.com>
Co-developed-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The offset was being incorrectly calculated for E822 - that led to
collisions in choosing TX timestamp register location when more than
one port was trying to use timestamping mechanism.
In E822 one quad is being logically split between ports, so quad 0 is
having trackers for ports 0-3, quad 1 ports 4-7 etc. Each port should
have separate memory location for tracking timestamps. Due to error for
example ports 1 and 2 had been assigned to quad 0 with same offset (0),
while port 1 should have offset 0 and 1 offset 16.
Fix it by correctly calculating quad offset.
Fixes: 3a7496234d ("ice: implement basic E822 PTP support")
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Andrii reported a bug with the following information:
2859 if (enum64_placeholder_id == 0) {
2860 enum64_placeholder_id = btf__add_int(btf, "enum64_placeholder", 1, 0);
>>> CID 394804: Control flow issues (NO_EFFECT)
>>> This less-than-zero comparison of an unsigned value is never true. "enum64_placeholder_id < 0U".
2861 if (enum64_placeholder_id < 0)
2862 return enum64_placeholder_id;
2863 ...
Here enum64_placeholder_id declared as '__u32' so enum64_placeholder_id < 0
is always false. Declare enum64_placeholder_id as 'int' in order to capture
the potential error properly.
Fixes: f2a625889b ("libbpf: Add enum64 sanitization")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220613054314.1251905-1-yhs@fb.com
* Properly reset the SVE/SME flags on vcpu load
* Fix a vgic-v2 regression regarding accessing the pending
state of a HW interrupt from userspace (and make the code
common with vgic-v3)
* Fix access to the idreg range for protected guests
* Ignore 'kvm-arm.mode=protected' when using VHE
* Return an error from kvm_arch_init_vm() on allocation failure
* A bunch of small cleanups (comments, annotations, indentation)
RISC-V:
* Typo fix in arch/riscv/kvm/vmid.c
* Remove broken reference pattern from MAINTAINERS entry
x86-64:
* Fix error in page tables with MKTME enabled
* Dirty page tracking performance test extended to running a nested
guest
* Disable APICv/AVIC in cases that it cannot implement correctly
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKjTIAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNhPQgAiIVtp8aepujUM/NhkNyK3SIdLzlS
oZCZiS6bvaecKXi/QvhBU0EBxAEyrovk3lmVuYNd41xI+PDjyaA4SDIl5DnToGUw
bVPNFSYqjpF939vUUKjc0RCdZR4o5g3Od3tvWoHTHviS1a8aAe5o9pcpHpD0D6Mp
Gc/o58nKAOPl3htcFKmjymqo3Y6yvkJU9NB7DCbL8T5mp5pJ959Mw1/LlmBaAzJC
OofrynUm4NjMyAj/mAB1FhHKFyQfjBXLhiVlS0SLiiEA/tn9/OXyVFMKG+n5VkAZ
Q337GMFe2RikEIuMEr3Rc4qbZK3PpxHhaj+6MPRuM0ho/P4yzl2Nyb/OhA==
=h81Q
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"While last week's pull request contained miscellaneous fixes for x86,
this one covers other architectures, selftests changes, and a bigger
series for APIC virtualization bugs that were discovered during 5.20
development. The idea is to base 5.20 development for KVM on top of
this tag.
ARM64:
- Properly reset the SVE/SME flags on vcpu load
- Fix a vgic-v2 regression regarding accessing the pending state of a
HW interrupt from userspace (and make the code common with vgic-v3)
- Fix access to the idreg range for protected guests
- Ignore 'kvm-arm.mode=protected' when using VHE
- Return an error from kvm_arch_init_vm() on allocation failure
- A bunch of small cleanups (comments, annotations, indentation)
RISC-V:
- Typo fix in arch/riscv/kvm/vmid.c
- Remove broken reference pattern from MAINTAINERS entry
x86-64:
- Fix error in page tables with MKTME enabled
- Dirty page tracking performance test extended to running a nested
guest
- Disable APICv/AVIC in cases that it cannot implement correctly"
[ This merge also fixes a misplaced end parenthesis bug introduced in
commit 3743c2f025 ("KVM: x86: inhibit APICv/AVIC on changes to APIC
ID or APIC base") pointed out by Sean Christopherson ]
Link: https://lore.kernel.org/all/20220610191813.371682-1-seanjc@google.com/
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (34 commits)
KVM: selftests: Restrict test region to 48-bit physical addresses when using nested
KVM: selftests: Add option to run dirty_log_perf_test vCPUs in L2
KVM: selftests: Clean up LIBKVM files in Makefile
KVM: selftests: Link selftests directly with lib object files
KVM: selftests: Drop unnecessary rule for STATIC_LIBS
KVM: selftests: Add a helper to check EPT/VPID capabilities
KVM: selftests: Move VMX_EPT_VPID_CAP_AD_BITS to vmx.h
KVM: selftests: Refactor nested_map() to specify target level
KVM: selftests: Drop stale function parameter comment for nested_map()
KVM: selftests: Add option to create 2M and 1G EPT mappings
KVM: selftests: Replace x86_page_size with PG_LEVEL_XX
KVM: x86: SVM: fix nested PAUSE filtering when L0 intercepts PAUSE
KVM: x86: SVM: drop preempt-safe wrappers for avic_vcpu_load/put
KVM: x86: disable preemption around the call to kvm_arch_vcpu_{un|}blocking
KVM: x86: disable preemption while updating apicv inhibition
KVM: x86: SVM: fix avic_kick_target_vcpus_fast
KVM: x86: SVM: remove avic's broken code that updated APIC ID
KVM: x86: inhibit APICv/AVIC on changes to APIC ID or APIC base
KVM: x86: document AVIC/APICv inhibit reasons
KVM: x86/mmu: Set memory encryption "value", not "mask", in shadow PDPTRs
...
Minor spelling fix spotted in bpf_verifier.h. Spelling is no big deal,
but it is still an improvement when reading through the code.
Signed-off-by: Hongyi Lu <jwnhy0@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220613211633.58647-1-jwnhy0@gmail.com
Two points of potential failure in the generic transmit function are:
1. completion queue (cq) reservation failure.
2. skb allocation failure
Originally the cq reservation was performed first, followed by the skb
allocation. Commit 675716400d ("xdp: fix possible cq entry leak")
reversed the order because at the time there was no mechanism available
to undo the cq reservation which could have led to possible cq entry leaks
in the event of skb allocation failure. However if the skb allocation is
performed first and the cq reservation then fails, the xsk skb destructor
is called which blindly adds the skb address to the already full cq leading
to undefined behavior.
This commit restores the original order (cq reservation followed by skb
allocation) and uses the xskq_prod_cancel helper to undo the cq reserve
in event of skb allocation failure.
Fixes: 675716400d ("xdp: fix possible cq entry leak")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220614070746.8871-1-ciara.loftus@intel.com
Stale Data.
They are a class of MMIO-related weaknesses which can expose stale data
by propagating it into core fill buffers. Data which can then be leaked
using the usual speculative execution methods.
Mitigations include this set along with microcode updates and are
similar to MDS and TAA vulnerabilities: VERW now clears those buffers
too.
-----BEGIN PGP SIGNATURE-----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=LBxT
-----END PGP SIGNATURE-----
Merge tag 'x86-bugs-2022-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 MMIO stale data fixes from Thomas Gleixner:
"Yet another hw vulnerability with a software mitigation: Processor
MMIO Stale Data.
They are a class of MMIO-related weaknesses which can expose stale
data by propagating it into core fill buffers. Data which can then be
leaked using the usual speculative execution methods.
Mitigations include this set along with microcode updates and are
similar to MDS and TAA vulnerabilities: VERW now clears those buffers
too"
* tag 'x86-bugs-2022-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation/mmio: Print SMT warning
KVM: x86/speculation: Disable Fill buffer clear within guests
x86/speculation/mmio: Reuse SRBDS mitigation for SBDS
x86/speculation/srbds: Update SRBDS mitigation selection
x86/speculation/mmio: Add sysfs reporting for Processor MMIO Stale Data
x86/speculation/mmio: Enable CPU Fill buffer clearing on idle
x86/bugs: Group MDS, TAA & Processor MMIO Stale Data mitigations
x86/speculation/mmio: Add mitigation for Processor MMIO Stale Data
x86/speculation: Add a common function for MD_CLEAR mitigation update
x86/speculation/mmio: Enumerate Processor MMIO Stale Data bug
Documentation: Add documentation for Processor MMIO Stale Data
Both RIF and ACL flow counters use a 24-bit SW-managed counter address to
communicate which counter they want to bind.
In a number of Spectrum FW releases, binding a RIF counter is broken and
slices the counter index to 16 bits. As a result, on Spectrum-2 and above,
no more than about 410 RIF counters can be effectively used. This
translates to 205 netdevices for which L3 HW stats can be enabled. (This
does not happen on Spectrum-1, because there are fewer counters available
overall and the counter index never exceeds 16 bits.)
Binding counters to ACLs does not have this issue. Therefore reorder the
counter allocation scheme so that RIF counters come first and therefore get
lower indices that are below the 16-bit barrier.
Fixes: 98e60dce4d ("Merge branch 'mlxsw-Introduce-initial-Spectrum-2-support'")
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220613125017.2018162-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit dd8b6803bc ("exynos: drm: dsi: Attach in_bridge in MIC driver")
moved Exynos MIC attaching from DSI to MIC driver. However the method
proposed there is incomplete and cannot really work. To properly attach
it to the bridge chain, access to the respective encoder is needed. The
Exynos MIC driver always attaches to the encoder created by the Exynos
DSI driver, so grab it via available helpers for getting access to the
CRTC and encoders. This also requires to change the order of driver
component binding to let DSI to be bound before MIC.
Fixes: dd8b6803bc ("exynos: drm: dsi: Attach in_bridge in MIC driver")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixed merge conflict.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The of_drm_find_bridge() does not return error pointers, it returns
NULL on error.
Fixes: dd8b6803bc ("exynos: drm: dsi: Attach in_bridge in MIC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The Baikal-T1 AXI bus driver correctly handles the deferred probe
situation, but still pollutes the system log with a misleading error
message. Let's fix that by using the dev_err_probe() method to print the
log message in case of the clocks/resets request errors.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20220610104030.28399-2-Sergey.Semin@baikalelectronics.ru'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Baikal-T1 APB bus driver correctly handles the deferred probe
situation, but still pollutes the system log with a misleading error
message. Let's fix that by using the dev_err_probe() method to print the
log message in case of the clocks/resets request errors.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20220610104030.28399-1-Sergey.Semin@baikalelectronics.ru'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
please pull the following:
- Nicolas steps down from maintaining the BCM283x/BCM2711 (Raspberry
Pi) architecture and designates Florian to take care of that
-----BEGIN PGP SIGNATURE-----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=TVU2
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=LIgN
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.19/maintainers-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains MAINTAINERS file update for Broadcom SoCs,
please pull the following:
- Nicolas steps down from maintaining the BCM283x/BCM2711 (Raspberry
Pi) architecture and designates Florian to take care of that
* tag 'arm-soc/for-5.19/maintainers-fixes' of https://github.com/Broadcom/stblinux:
MAINTAINERS: Update BCM2711/BCM2835 maintainer
Link: https://lore.kernel.org/r/20220608093132.1465703-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- MAINTAINERS: Add s32@nxp.com as a review group.
- dts: Pass unit name to soc node to fix a W=1 build warning.
-----BEGIN PGP SIGNATURE-----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=Bxvz
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=PRji
-----END PGP SIGNATURE-----
Merge tag 's32g2-fixes-5.19' of https://github.com/chesterlintw/linux-s32g into arm/fixes
S32G2 fixes for 5.19
- MAINTAINERS: Add s32@nxp.com as a review group.
- dts: Pass unit name to soc node to fix a W=1 build warning.
* tag 's32g2-fixes-5.19' of https://github.com/chesterlintw/linux-s32g:
MAINTAINERS: add a new reviewer for S32G
arm64: s32g2: Pass unit name to soc node
Link: https://lore.kernel.org/r/Yp9Y4nGrQ2kVKV6S@linux-8mug
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
of_find_compatible_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: 1d22924e1c ("ARM: Add platform support for LSI AXM55xx SoC")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220601090548.47616-1-linmq006@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When calling setattr_prepare() to determine the validity of the
attributes the ia_{g,u}id fields contain the value that will be written
to inode->i_{g,u}id. This is exactly the same for idmapped and
non-idmapped mounts and allows callers to pass in the values they want
to see written to inode->i_{g,u}id.
When group ownership is changed a caller whose fsuid owns the inode can
change the group of the inode to any group they are a member of. When
searching through the caller's groups we need to use the gid mapped
according to the idmapped mount otherwise we will fail to change
ownership for unprivileged users.
Consider a caller running with fsuid and fsgid 1000 using an idmapped
mount that maps id 65534 to 1000 and 65535 to 1001. Consequently, a file
owned by 65534:65535 in the filesystem will be owned by 1000:1001 in the
idmapped mount.
The caller now requests the gid of the file to be changed to 1000 going
through the idmapped mount. In the vfs we will immediately map the
requested gid to the value that will need to be written to inode->i_gid
and place it in attr->ia_gid. Since this idmapped mount maps 65534 to
1000 we place 65534 in attr->ia_gid.
When we check whether the caller is allowed to change group ownership we
first validate that their fsuid matches the inode's uid. The
inode->i_uid is 65534 which is mapped to uid 1000 in the idmapped mount.
Since the caller's fsuid is 1000 we pass the check.
We now check whether the caller is allowed to change inode->i_gid to the
requested gid by calling in_group_p(). This will compare the passed in
gid to the caller's fsgid and search the caller's additional groups.
Since we're dealing with an idmapped mount we need to pass in the gid
mapped according to the idmapped mount. This is akin to checking whether
a caller is privileged over the future group the inode is owned by. And
that needs to take the idmapped mount into account. Note, all helpers
are nops without idmapped mounts.
New regression test sent to xfstests.
Link: https://github.com/lxc/lxd/issues/10537
Link: https://lore.kernel.org/r/20220613111517.2186646-1-brauner@kernel.org
Fixes: 2f221d6f7b ("attr: handle idmapped mounts")
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org # 5.15+
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Adding a "secure" version of STM32 boards (DK1/DK2/ED1/EV1), SCMI (clock/
reset) protocol and OP-TEE node have been added in SoC dtsi file
(stm32mp151.dtsi). They have been added with a status disabled in order to
keep our legacy unchanged. It is actually not enough to keep our legacy
unchanged.
First, just a reminder about our use case: TF-A (BL2) loads and starts
OP-TEE, then loads and runs U-Boot. U-Boot code checks if an OP-TEE is
running, if yes it searches in Kernel device tree if an OP-TEE node is
present:
-If the OP-TEE node is not present then U-Boot copies OP-TEE node and its
reserved memory region from U-Boot device tree to the kernel device tree.
-If the OP-TEE node is present then it does nothing (this OP-TEE node will
be used by Linux). So U-Boot lets the kernel device tree unchanged thinking
it is correct for an OP-TEE usage. It is the case for our legacy boards,
the OP-TEE node is present (although disabled) but the reserved memory
region is not declared. As no memory region has been reserved for OP-TEE,
the end of DDR is seen by the kernel as free and then used for CMA. But as
OP-TEE is running, this end of DDR is already used by OP-TEE. So as soon as
kernel tries to access to the CMA region OP-TEE raises an error.
To fix it, all OP-TEE node and SCMI is moved in a dedicated file.
Fixes: 40b4157dbd ("ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15")
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20220613071920.5463-1-alexandre.torgue@foss.st.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Bunch of fixes to address:
1. Issues reported on RK3568 EVB1 and BPI-R2 pro platforms using SCMI.
More checks were added to validate the firmware response but that
resulted in breaking above platforms, so the checks are relaxed when
for cases where there is no potential memory corruption issues.
2. Possible data leak by reading more than required length from the firmware.
Recent addition of support for v3.1 extended names used larger buffers
in the kernel and used their size to read response from the firmware even
for cases where shorter formats are used. While that is mostly harmless
except when firmware sends malformed non-NULL terminated buffers.
3. Possible issues sending unsupported commands to the firmware.
SENSOR_AXIS_NAME_GET added in v3.1 needs to be used only if the firmware
supports it. While the firmware conformant to the spec must return not
supported error for any unsupported features, it is always safer to
avoid issuing commands that are known to be unsupported.
4. Incorrect error propagation in scmi_voltage_descriptors_get.
Since the return value is not reset for each iteration of the loop, the
error value in the previous iteration will be carried for the current one.
Fix that by not saving the return values into local variable.
5. Some warnings reported by cppcheck
-----BEGIN PGP SIGNATURE-----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=NOFn
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Y1Nw
-----END PGP SIGNATURE-----
Merge tag 'scmi-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI firmware driver fixes for v5.19
Bunch of fixes to address:
1. Issues reported on RK3568 EVB1 and BPI-R2 pro platforms using SCMI.
More checks were added to validate the firmware response but that
resulted in breaking above platforms, so the checks are relaxed when
for cases where there is no potential memory corruption issues.
2. Possible data leak by reading more than required length from the firmware.
Recent addition of support for v3.1 extended names used larger buffers
in the kernel and used their size to read response from the firmware even
for cases where shorter formats are used. While that is mostly harmless
except when firmware sends malformed non-NULL terminated buffers.
3. Possible issues sending unsupported commands to the firmware.
SENSOR_AXIS_NAME_GET added in v3.1 needs to be used only if the firmware
supports it. While the firmware conformant to the spec must return not
supported error for any unsupported features, it is always safer to
avoid issuing commands that are known to be unsupported.
4. Incorrect error propagation in scmi_voltage_descriptors_get.
Since the return value is not reset for each iteration of the loop, the
error value in the previous iteration will be carried for the current one.
Fix that by not saving the return values into local variable.
5. Some warnings reported by cppcheck
* tag 'scmi-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix incorrect error propagation in scmi_voltage_descriptors_get
firmware: arm_scmi: Avoid using extended string-buffers sizes if not necessary
firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupported
firmware: arm_scmi: Remove all the unused local variables
firmware: arm_scmi: Relax base protocol sanity checks on the protocol list
Link: https://lore.kernel.org/r/20220614100007.1029881-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Correct i.MX7 power domain for HSIC USB PHY node to fix an USB Host
issue, that is all downstream events will be lost if USB host is
runtime suspended.
- Fix i.MX8M blk-ctrl LCDIF2 power domain to point to refer to the
correct clock.
- Correct i.MX6Q/DL PU regulator ramp delay to fix some peripherals
power-up failure especially when the chip is at a low temperature.
- Fix capacitive touch reset polarity for imx6qdl-colibri board.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmKoWogUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM45MQf/WybSyxXm8FWeJ2hmY0XLUm/CQJXR
CZCP/vdhPtt8Cg2TEh2FJ/hOeUDJx/NJ4Il1E8C782Be+NvYHxI1PecsdJNDec6T
UmWNswb++DHgzVSdR2/f/Bbjqyq7iqCzChcvNwH8heKfg0xpkM/nkA1gIutXD/HB
wYxRZg962ujAv5ejjHMB/tlsblbSRy4D1TpvRFjS6v/403OV6z+cRLYZprTaMtiP
RNhB5l9oA3b07EBDRd7Q2KdAwHIBSv+PypKOWoCYK5stTBs+UuMg4XsXprdjFUkC
a3IZDKlE8gTVj1L8yd8huJRaKAxz4zeF5YjOERN9XayXsY8d0bbOdHWoFQ==
=OWec
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmKoX9AACgkQmmx57+YA
GNn3bg/9GJSngR20QFB2n/Sr78l+zLwnujWkGQzyVhodLWzEo2SCoF0UEI+1RIlQ
X8JR/78emIfrI610QRWpT7W5pbfY8zHp1L4MRfp6MK2tTdrvRnp7MkSIC2K7HiZL
cxunCZc33vmvU+Ua2d54opfO/hyttLrZO2M7wPAbty6S7Q7HhLhBdLjOxqb2CAQr
NP4S0ea7d48haGh7MdgYF45fvxbzUc0ogMNOwyPvsXFh4EFwduQKbnpLXQKAVTCY
Jzx4XhqPTqpzyVPiWLDgqRelQZ6HAwChSG4vrSS34opP3rxnAuOMZ5UgG/+IdY1F
LWcUJmo8sBb3DZetbHKB6j9E2cbLMMMbOdOA8L2OfmOgnhicD3pLpNoGhf0mJ8vL
ox5f92OF71udpxqva+f4SWeMR8L9XrKVGQeRlNseSRNV9RLx8JYRgXFNbegvBtCP
+CQRvgL/yVnvpa/2jzkfd+sLMABmUHcMCHv8ZWJPbxmHs/THPqRi8wK46hW1hXE7
+xTl7UzLoOA5Yl4XYnKeAx+ByuxqoeMhvaLlAfdRpXvgYVyjcYorc8lrv/WVlsk/
diAWtB1qCg1y6gHjOtApyjEJCVW+TwFwW9t3kHvga7Hm2sF0P4pZZpPWsatwBHmx
30VtDzjPv/fOrKWWR+fKVfBuKxe+yMMrnCpCwcY+I77PtbuYxDc=
=MD3u
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.19:
- Correct i.MX7 power domain for HSIC USB PHY node to fix an USB Host
issue, that is all downstream events will be lost if USB host is
runtime suspended.
- Fix i.MX8M blk-ctrl LCDIF2 power domain to point to refer to the
correct clock.
- Correct i.MX6Q/DL PU regulator ramp delay to fix some peripherals
power-up failure especially when the chip is at a low temperature.
- Fix capacitive touch reset polarity for imx6qdl-colibri board.
* tag 'imx-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: imx8m-blk-ctrl: fix display clock for LCDIF2 power domain
ARM: dts: imx6qdl-colibri: Fix capacitive touch reset polarity
ARM: dts: imx6qdl: correct PU regulator ramp delay
ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node
Link: https://lore.kernel.org/r/20220614095515.GU254723@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The resource must be on the LRU before ttm_lru_bulk_move_add() is called
and we need to check if the BO is pinned or not before adding it.
Additional to that we missed taking the LRU spinlock in ttm_bo_unpin().
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613080816.4965-1-christian.koenig@amd.com
Fixes: fee2ede155 ("drm/ttm: rework bulk move handling v5")
The AMD XGbE driver currently counts the number of interrupts assigned
to the device by inspecting the pdev->resource array. Since commit
a1a2b7125e ("of/platform: Drop static setup of IRQ resource from DT
core") removed IRQs from this array, the driver now attempts to get all
interrupts from 1 to -1U and gives up probing once it reaches an invalid
interrupt index.
Obtain the number of IRQs with platform_irq_count() instead.
Fixes: a1a2b7125e ("of/platform: Drop static setup of IRQ resource from DT core")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20220609161457.69614-1-jean-philippe@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the implementation of ethtool_convert_link_mode_to_legacy_u32(), which
is supposed to return false if src has bits higher than 31 set. The current
implementation uses the complement of bitmap_fill(ext, 32) to test high
bits of src, which is wrong as bitmap_fill() fills _with long granularity_,
and sizeof(long) can be > 4. No users of this function currently check the
return value, so the bug was dormant.
Also remove the check for __ETHTOOL_LINK_MODE_MASK_NBITS > 32, as the enum
ethtool_link_mode_bit_indices contains far beyond 32 values. Using
find_next_bit() to test the src bitmask works regardless of this anyway.
Signed-off-by: Marco Bonelli <marco@mebeim.net>
Link: https://lore.kernel.org/r/20220609134900.11201-1-marco@mebeim.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's no point probing for phys on this artificial bus, so we can
save a little bit of boot time by telling mdiobus_register() not to do
that.
This doesn't have any functional change, since, at this point,
fixed_mdio_read() returns 0xffff for all addresses/registers, so
mdiobus_scan() -> get_phy_device() -> get_phy_c22_id()
will return -ENODEV, which is just ignored.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20220606200208.1665417-1-linux@rasmusvillemoes.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
LCDIF2 has its own display clock, use this one.
Fixes: 07614fed00 ("soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The commit feedaacdad ("Input: atmel_mxt_ts - fix up inverted RESET
handler") requires the reset GPIO to have GPIO_ACTIVE_LOW.
Fixes: 1524b27c94 ("ARM: dts: imx6dl-colibri: Move common nodes to SoM dtsi")
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Contrary to what was believed at the time, the ramp delay of 150us is not
plenty for the PU LDO with the default step time of 512 pulses of the 24MHz
clock. Measurements have shown that after enabling the LDO the voltage on
VDDPU_CAP jumps to ~750mV in the first step and after that the regulator
executes the normal ramp up as defined by the step size control.
This means it takes the regulator between 360us and 370us to ramp up to
the nominal 1.15V voltage for this power domain. With the old setting of
the ramp delay the power up of the PU GPC domain would happen in the middle
of the regulator ramp with the voltage being at around 900mV. Apparently
this was enough for most units to properly power up the peripherals in the
domain and execute the reset. Some units however, fail to power up properly,
especially when the chip is at a low temperature. In that case any access
to the GPU registers would yield an incorrect result with no way to recover
from this situation.
Change the ramp delay to 380us to cover the measured ramp up time with a
bit of additional slack.
Fixes: 40130d327f ("ARM: dts: imx6qdl: Allow disabling the PU regulator, add a enable ramp delay")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The kernel returns an endpoint ID as r.ep_connect_ret.handle in the
iscsi_uevent. The iscsid validates a received endpoint ID and treats zero
as an error. The commit referenced in the fixes line changed the endpoint
ID range, and zero is always assigned to the first endpoint ID. So, the
first attempt to create a new iSER connection always fails.
Link: https://lore.kernel.org/r/20220613123854.55073-1-sergeygo@nvidia.com
Fixes: 3c6ae371b8 ("scsi: iscsi: Release endpoint ID when its freed")
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Sergey Gorenko <sergeygo@nvidia.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In msm_devfreq_suspend() we cancel idle_work synchronously so that it
doesn't run after we power of the hw or in the resume path. But this
means that we want to ensure that idle_work is not scheduled *after* we
no longer hold a runpm ref. So switch the ordering of pm_runtime_put()
vs msm_devfreq_idle().
v2. Only move the runpm _put_autosuspend, and not the _mark_last_busy()
Fixes: 9bc9557017 ("drm/msm: Devfreq tuning")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210927152928.831245-1-robdclark@gmail.com
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220608161334.2140611-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Expose ifc bits and add needed structure fields and methods to
support enhanced CQE compression feature.
The enhanced CQE compression feature improves cpu utiliziation with
better packet latency from nic to host.
Signed-off-by: Ofer Levi <oferle@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Remove not used MLX5_CAP_BITS_RW_MASK.
While at it, remove CAP_MASK, MLX5_CAP_OFF_CMDIF_CSUM
and MLX5_DEV_CAP_FLAG_*, since MLX5_CAP_BITS_RW_MASK
was their only user.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently, the allocation of fdb software objects are done is single
function, oppose to the cleanup of them.
Group the cleanup of fdb software objects to single function.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Attach flow meter to FTE with object id and index.
Use metadata register C5 to store the packet color meter result.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
total_q_under_processor_handle - number of queues in error state due to an
async error or errored command.
send_queue_priority_update_flow - number of QP/SQ priority/SL update
events.
cq_overrun - number of times CQ entered an error state due to an
overflow.
async_eq_overrun -number of time an EQ mapped to async events was
overrun.
comp_eq_overrun - number of time an EQ mapped to completion events was
overrun.
quota_exceeded_command - number of commands issued and failed due to quota
exceeded.
invalid_command - number of commands issued and failed dues to any reason
other than quota exceeded.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add support for allocate/deallocate and registering MR of the new type
of ICM area. Support exists only for devices that support sw_owner_v2.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Added support for managing new type of ICM for devices that
support sw_owner_v2.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Added new fields for device memory capabilities, in order to
support creation of ICM memory for modify header patterns.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Like commit 5611ec2b98 ("nvme-pci: prevent SK hynix PC400 from using
Write Zeroes command"), UMIS and Samsung has the same issue:
[ 6305.633887] blk_update_request: operation not supported error,
dev nvme0n1, sector 340812032 op 0x9:(WRITE_ZEROES) flags 0x0
phys_seg 0 prio class 0
So also disable Write Zeroes command on UMIS and Samsung.
Signed-off-by: rasheed.hsueh <rasheed.hsueh@lcfc.corp-partner.google.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When ZHITAI TiPro7000 SSDs entered deepest power state(ps4)
it has the same APST sleep problem as Kingston A2000.
by chance the system crashes and displays the same dmesg info:
https://bugzilla.kernel.org/show_bug.cgi?id=195039#c65
As the Archlinux wiki suggest (enlat + exlat) < 25000 is fine
and my testing shows no system crashes ever since.
Therefore disabling the deepest power state will fix the APST sleep issue.
https://wiki.archlinux.org/title/Solid_state_drive/NVMe
This is the APST data from 'nvme id-ctrl /dev/nvme1'
NVME Identify Controller:
vid : 0x1e49
ssvid : 0x1e49
sn : [...]
mn : ZHITAI TiPro7000 1TB
fr : ZTA32F3Y
[...]
ps 0 : mp:3.50W operational enlat:5 exlat:5 rrt:0 rrl:0
rwt:0 rwl:0 idle_power:- active_power:-
ps 1 : mp:3.30W operational enlat:50 exlat:100 rrt:1 rrl:1
rwt:1 rwl:1 idle_power:- active_power:-
ps 2 : mp:2.80W operational enlat:50 exlat:200 rrt:2 rrl:2
rwt:2 rwl:2 idle_power:- active_power:-
ps 3 : mp:0.1500W non-operational enlat:500 exlat:5000 rrt:3 rrl:3
rwt:3 rwl:3 idle_power:- active_power:-
ps 4 : mp:0.0200W non-operational enlat:2000 exlat:60000 rrt:4 rrl:4
rwt:4 rwl:4 idle_power:- active_power:-
Signed-off-by: Ning Wang <ningwang35@outlook.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
ADATA XPG GAMMIX S50 drives report bogus eui64 values that appear to
be the same across drives in one system. Quirk them out so they are
not marked as "non globally unique" duplicates.
Signed-off-by: Stefan Reiter <stefan@pimaker.at>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Many users have encountered IO timeouts with a CSTS value of 0xffffffff,
which indicates a failure to read the register. While there are various
potential causes for this observation, faulty NVMe APST has been the
culprit quite frequently. Add the recommended troubleshooting steps in
the error output when this condition occurs.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The recent global id check is finding poorly implemented devices in the
wild. Include relavant device information in the output to help quicken
an appropriate quirk patch.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This provides more context to users.
Old message:
[ 00.000000] No UUID available providing old NGUID
New message:
[ 00.000000] block nvme0n1: No UUID available providing old NGUID
Fixes: d934f9848a ("nvme: provide UUID value to userspace")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
