We want just one function that will handle both normal cqes and 32B
cqes. Combine __io_fill_cqe_req() and __io_fill_cqe_req32(). It's still
not entirely correct yet, but saves us from cases when we fill an CQE of
a wrong size.
Fixes: 76c68fbf1a ("io_uring: enable CQE32")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8085c5b2f74141520f60decd45334f87e389b718.1655287457.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Adding mdb entries on disabled ports allows you to do setup before
accepting any traffic, avoiding any time where the port is not in the
multicast group.
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The extra byte inserted by usbnet.c when
(length % dev->maxpacket == 0) is causing problems to device.
This patch sets FLAG_SEND_ZLP to avoid this.
Tested with: 0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet
Problems observed:
======================================================================
1) Using ssh/sshfs. The remote sshd daemon can abort with the message:
"message authentication code incorrect"
This happens because the tcp message sent is corrupted during the
USB "Bulk out". The device calculate the tcp checksum and send a
valid tcp message to the remote sshd. Then the encryption detects
the error and aborts.
2) NETDEV WATCHDOG: ... (ax88179_178a): transmit queue 0 timed out
3) Stop normal work without any log message.
The "Bulk in" continue receiving packets normally.
The host sends "Bulk out" and the device responds with -ECONNRESET.
(The netusb.c code tx_complete ignore -ECONNRESET)
Under normal conditions these errors take days to happen and in
intense usage take hours.
A test with ping gives packet loss, showing that something is wrong:
ping -4 -s 462 {destination} # 462 = 512 - 42 - 8
Not all packets fail.
My guess is that the device tries to find another packet starting
at the extra byte and will fail or not depending on the next
bytes (old buffer content).
======================================================================
Signed-off-by: Jose Alonso <joalonsof@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the capability to map non-linear xdp frames in XDP_TX and ndo_xdp_xmit
callback.
Tested-by: Sarkar Tirthendu <tirthendu.sarkar@intel.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
phydev->port was not set and always reported as PORT_TP.
Set phydev->port according to inserted SFP module.
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add basic description for the xilinx emaclite driver DT bindings.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-06-14
This series contains updates to ice driver only.
Michal fixes incorrect Tx timestamp offset calculation for E822 devices.
Roman enforces required VLAN filtering settings for double VLAN mode.
Przemyslaw fixes memory corruption issues with VFs by ensuring
queues are disabled in the error path of VF queue configuration and to
disabled VFs during reset.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder says:
====================
net: ipa: simplify completion statistics
The first patch in this series makes the name used for variables
representing a TRE ring be consistent everywhere. The second
renames two structure fields to better represent their purpose.
The last four rework a little code that manages some tranaction and
byte transfer statistics maintained mainly for TX endpoints. For
the most part this series is refactoring. The last one also
includes the first step toward no longer assuming an event ring is
dedicated to a single channel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename gsi_channel_tx_update() to be gsi_trans_tx_completed(), and
pass it just the transaction pointer, deriving the channel from the
transaction. Update the comments above the function to provide a
more concise description of how statistics for TX endpoints are
maintained and used.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In gsi_evt_ring_rx_update(), we update each transaction so its len
field reflects the actual number of bytes received. In the process,
the total number of transactions and bytes processed on the channel
are summed, and added to a running total for the channel.
But we don't actually use those running totals for RX endpoints.
They're maintained for TX channels to support CoDel when they are
associated with a "real" network device.
So stop maintaining these totals for RX endpoints, and update the
comment where the fields are defined to make it clear they're only
valid for TX channels.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a TX request is issued, its channel's accumulated byte and
transaction counts are recorded. This currently does *not* take
into account the transaction being committed.
Later, when the transaction completes, the number of bytes and
transactions that have completed since the transaction was committed
are reported to the network stack. The transaction and its byte
count are accounted for at that time.
Instead, record the transaction and its bytes in the counts recorded
at commit time. This avoids the need to do so when the transaction
completes, and provides a (small) simplification of that code.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Create a new function that encapsulates recording information needed
for TX channel statistics when a transaction is committed.
Record the accumulated length in the transaction before the call
(for both RX and TX), so it can be used when updating TX statistics.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two fields in a GSI transaction that keep track of TRE
counts. The first represents the number of TREs reserved for the
transaction in the TRE ring; that's currently named "tre_count".
The second is the number of TREs that are actually *used* by the
transaction at the time it is committed.
Rename the "tre_count" field to be "rsvd_count", to make its meaning
a little more specific. The "_count" is present in the name mainly
to avoid interpreting it as a reserved (not-to-be-used) field. This
name also distinguishes it from the "tre_count" field associated
with a channel.
Rename the "used" field to be "used_count", to match the convention
used for reserved TREs.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
All local variables that represent event rings are named "ring".
All but two functions that represent a channel's TRE ring with a
local variable use the name "tre_ring". For consistency, use that
name in the two functions that don't fit the pattern.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Frank Wunderlich says:
====================
Support mt7531 on BPI-R2 Pro
This Series add Support for the mt7531 switch on Bananapi R2 Pro board.
This board uses port5 of the switch to conect to the gmac0 of the
rk3568 SoC.
Currently CPU-Port is hardcoded in the mt7530 driver to port 6.
Compared to v1 the reset-Patch was dropped as it was not needed and
CPU-Port-changes are completely rewriten based on suggestions/code from
Vladimir Oltean (many thanks to this).
In DTS Patch i only dropped the status-property that was not
needed/ignored by driver.
Due to the Changes i also made a regression test on mt7623 bpi-r2
(mt7623 soc + mt7530) and bpi-r64 (mt7622 soc + mt7531) with cpu-
port 6. Tests were done directly (ipv4 config on dsa user port)
and with vlan-aware bridge including vlan that was tagged outgoing
on dsa user port.
====================
Link: https://lore.kernel.org/r/20220610170541.8643-1-linux@fw-web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add Device Tree node for mt7531 switch connected to gmac0.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A board may have no independent reset-line, so reset cannot be used
inside switch driver.
E.g. on Bananapi-R2 Pro switch and gmac are connected to same reset-line.
Resets should be acquired only to 1 device/driver. This prevents reset to
be bound to switch-driver if reset is already used for gmac. If reset is
only used by switch driver it resets the switch *and* the gmac after the
mdio bus comes up resulting in mdio bus goes down. It takes some time
until all is up again, switch driver tries to read from mdio, will fail
and defer the probe. On next try the reset does the same again.
Make reset optional for such boards.
Allow port 5 as cpu-port and phy-mode rgmii for mt7531.
- MT7530 supports RGMII on port 5 and RGMII/TRGMII on port 6.
- MT7531 supports on port 5 RGMII and SGMII (dual-sgmii) and
SGMII on port 6.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace last occurences of hardcoded cpu-port by cpu_dp member of
dsa_port struct.
Now the constant can be dropped.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enumerate available cpu-ports instead of using hardcoded constant.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rework vlan_add/vlan_del functions in preparation for dynamic cpu port.
Currently BIT(MT7530_CPU_PORT) is added to new_members, even though
mt7530_port_vlan_add() will be called on the CPU port too.
Let DSA core decide when to call port_vlan_add for the CPU port, rather
than doing it implicitly.
We can do autonomous forwarding in a certain VLAN, but not add br0 to that
VLAN and avoid flooding the CPU with those packets, if software knows it
doesn't need to process them.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert txt binding to yaml binding for Mediatek switches.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maintainers of the directory Documentation/devicetree/bindings/net
are also the maintainers of the corresponding directory
include/dt-bindings/net.
Add the file entry for include/dt-bindings/net to the appropriate
section in MAINTAINERS.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20220613121826.11484-1-lukas.bulwahn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It turned out that Lenovo shipped two completely different products
with the very same PCI SSID, where both require different quirks;
namely, Lenovo C940 has already the fixup for its speaker
(ALC298_FIXUP_LENOVO_SPK_VOLUME) with the PCI SSID 17aa:3818, while
Yoga Duet 7 has also the very same PCI SSID but requires a different
quirk, ALC287_FIXUP_YOGA7_14TIL_SPEAKERS.
Fortunately, both are with different codecs (C940 with ALC298 and Duet
7 with ALC287), hence we can apply different fixes by checking the
codec ID. This patch implements that special fixup function.
For easier handling, the internal function for applying a specific
fixup entry is exported as __snd_hda_apply_fixup(), so that it can be
called from the codec driver. The rest is simply calling it with a
different fixup ID depending on the codec ID.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: nikitashvets@flyium.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/5ca147d1-3a2d-60c6-c491-8aa844183222@redhat.com
Link: https://lore.kernel.org/r/20220614054831.14648-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Latest drivers version requires phy-mode to be set. Otherwise we will
use "NA" mode and the switch driver will invalidate this port mode.
Fixes: 65ac79e181 ("net: dsa: microchip: add the phylink get_caps")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20220610081621.584393-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
mlxsw: Remove XM support
The XM was supposed to be an external device connected to the
Spectrum-{2,3} ASICs using dedicated Ethernet ports. Its purpose was to
increase the number of routes that can be offloaded to hardware. This was
achieved by having the ASIC act as a cache that refers cache misses to the
XM where the FIB is stored and LPM lookup is performed.
Testing was done over an emulator and dedicated setups in the lab, but
the product was discontinued before shipping to customers.
Therefore, in order to remove dead code and reduce complexity of the
code base, revert the three patchsets that added XM support.
====================
Link: https://lore.kernel.org/r/20220613132116.2021055-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Decrement the refcount of the parent dentry's fid after walking
each path component during a full path walk for a lookup. Failure to do
so can lead to fids that are not clunked until the filesystem is
unmounted, as indicated by this warning:
9pnet: found fid 3 not clunked
The improper refcounting after walking resulted in open(2) returning
-EIO on any directories underneath the mount point when using the virtio
transport. When using the fd transport, there's no apparent issue until
the filesytem is unmounted and the warning above is emitted to the logs.
In some cases, the user may not yet be attached to the filesystem and a
new root fid, associated with the user, is created and attached to the
root dentry before the full path walk is performed. Increment the new
root fid's refcount to two in that situation so that it can be safely
decremented to one after it is used for the walk operation. The new fid
will still be attached to the root dentry when
v9fs_fid_lookup_with_uid() returns so a final refcount of one is
correct/expected.
Link: https://lkml.kernel.org/r/20220527000003.355812-2-tyhicks@linux.microsoft.com
Link: https://lkml.kernel.org/r/20220612085330.1451496-4-asmadeus@codewreck.org
Fixes: 6636b6dcc3 ("9p: add refcount to p9_fid struct")
Cc: stable@vger.kernel.org
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
[Dominique: fix clunking fid multiple times discussed in second link]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
we check for protocol version later than required, after a fid has
been obtained. Just move the version check earlier.
Link: https://lkml.kernel.org/r/20220612085330.1451496-3-asmadeus@codewreck.org
Fixes: 6636b6dcc3 ("9p: add refcount to p9_fid struct")
Cc: stable@vger.kernel.org
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
We need to release directory fid if we fail halfway through open
This fixes fid leaking with xfstests generic 531
Link: https://lkml.kernel.org/r/20220612085330.1451496-2-asmadeus@codewreck.org
Fixes: 6636b6dcc3 ("9p: add refcount to p9_fid struct")
Cc: stable@vger.kernel.org
Reported-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
'bgmac' is part of a managed resource allocated with bgmac_alloc(). It
should not be freed explicitly.
Remove the erroneous kfree() from the .remove() function.
Fixes: 34a5102c32 ("net: bgmac: allocate struct bgmac just once & don't copy it")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/a026153108dd21239036a032b95c25b5cece253b.1655153616.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Saeed Mahameed says:
====================
mlx5-next: updates 2022-06-14
1) Updated HW bits and definitions for upcoming features
1.1) vport debug counters
1.2) flow meter
1.3) Execute ASO action for flow entry
1.4) enhanced CQE compression
2) Add ICM header-modify-pattern RDMA API
Leon Says
=========
SW steering manipulates packet's header using "modifying header" actions.
Many of these actions do the same operation, but use different data each time.
Currently we create and keep every one of these actions, which use expensive
and limited resources.
Now we introduce a new mechanism - pattern and argument, which splits
a modifying action into two parts:
1. action pattern: contains the operations to be applied on packet's header,
mainly set/add/copy of fields in the packet
2. action data/argument: contains the data to be used by each operation
in the pattern.
This way we reuse same patterns with different arguments to create new
modifying actions, and since many actions share the same operations, we end
up creating a small number of patterns that we keep in a dedicated cache.
These modify header patterns are implemented as new type of ICM memory,
so the following kernel patch series add the support for this new ICM type.
==========
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Add bits and fields to support enhanced CQE compression
net/mlx5: Remove not used MLX5_CAP_BITS_RW_MASK
net/mlx5: group fdb cleanup to single function
net/mlx5: Add support EXECUTE_ASO action for flow entry
net/mlx5: Add HW definitions of vport debug counters
net/mlx5: Add IFC bits and enums for flow meter
RDMA/mlx5: Support handling of modify-header pattern ICM area
net/mlx5: Manage ICM of type modify-header pattern
net/mlx5: Introduce header-modify-pattern ICM properties
====================
Link: https://lore.kernel.org/r/20220614184028.51548-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 704c91e59f ('selftests/bpf: Test "bpftool gen min_core_btf"')
added a test test_core_btfgen to test core relocation with btf
generated with 'bpftool gen min_core_btf'. Currently,
among 76 subtests, 25 are skipped.
...
#46/69 core_reloc_btfgen/enumval:OK
#46/70 core_reloc_btfgen/enumval___diff:OK
#46/71 core_reloc_btfgen/enumval___val3_missing:OK
#46/72 core_reloc_btfgen/enumval___err_missing:SKIP
#46/73 core_reloc_btfgen/enum64val:OK
#46/74 core_reloc_btfgen/enum64val___diff:OK
#46/75 core_reloc_btfgen/enum64val___val3_missing:OK
#46/76 core_reloc_btfgen/enum64val___err_missing:SKIP
...
#46 core_reloc_btfgen:SKIP
Summary: 1/51 PASSED, 25 SKIPPED, 0 FAILED
Alexei found that in the above core_reloc_btfgen/enum64val___err_missing
should not be skipped.
Currently, the core_reloc tests have some negative tests.
In Commit 704c91e59f, for core_reloc_btfgen, all negative tests
are skipped with the following condition
if (!test_case->btf_src_file || test_case->fails) {
test__skip();
continue;
}
This is too conservative. Negative tests do not fail
mkstemp() and run_btfgen() should not be skipped.
There are a few negative tests indeed failing run_btfgen()
and this patch added 'run_btfgen_fails' to mark these tests
so that they can be skipped for btfgen tests. With this,
we have
...
#46/69 core_reloc_btfgen/enumval:OK
#46/70 core_reloc_btfgen/enumval___diff:OK
#46/71 core_reloc_btfgen/enumval___val3_missing:OK
#46/72 core_reloc_btfgen/enumval___err_missing:OK
#46/73 core_reloc_btfgen/enum64val:OK
#46/74 core_reloc_btfgen/enum64val___diff:OK
#46/75 core_reloc_btfgen/enum64val___val3_missing:OK
#46/76 core_reloc_btfgen/enum64val___err_missing:OK
...
Summary: 1/62 PASSED, 14 SKIPPED, 0 FAILED
Totally 14 subtests are skipped instead of 25.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220614055526.628299-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The result from ->get_cd() may be incorrect as the card detect debouncing
isn't managed correctly. Let's fix it.
Signed-off-by: Chevron Li<chevron.li@bayhubtech.com>
Fixes: 7d44061704 ("mmc: sdhci-pci-o2micro: Fix O2 Host data read/write DLL Lock phase shift issue")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220602132543.596-1-chevron.li@bayhubtech.com
[Ulf: Updated the commit message]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The function always returns 0, so we don't need to check whether the
return value is 0 or not.
This change was first introduced in commit a777e18f1b ("bpftool: Use
libbpf 1.0 API mode instead of RLIMIT_MEMLOCK"), but later reverted to
restore the unconditional rlimit bump in bpftool. Let's re-add it.
Co-developed-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220610112648.29695-3-quentin@isovalent.com
This reverts commit a777e18f1b.
In commit a777e18f1b ("bpftool: Use libbpf 1.0 API mode instead of
RLIMIT_MEMLOCK"), we removed the rlimit bump in bpftool, because the
kernel has switched to memcg-based memory accounting. Thanks to the
LIBBPF_STRICT_AUTO_RLIMIT_MEMLOCK, we attempted to keep compatibility
with other systems and ask libbpf to raise the limit for us if
necessary.
How do we know if memcg-based accounting is supported? There is a probe
in libbpf to check this. But this probe currently relies on the
availability of a given BPF helper, bpf_ktime_get_coarse_ns(), which
landed in the same kernel version as the memory accounting change. This
works in the generic case, but it may fail, for example, if the helper
function has been backported to an older kernel. This has been observed
for Google Cloud's Container-Optimized OS (COS), where the helper is
available but rlimit is still in use. The probe succeeds, the rlimit is
not raised, and probing features with bpftool, for example, fails.
A patch was submitted [0] to update this probe in libbpf, based on what
the cilium/ebpf Go library does [1]. It would lower the soft rlimit to
0, attempt to load a BPF object, and reset the rlimit. But it may induce
some hard-to-debug flakiness if another process starts, or the current
application is killed, while the rlimit is reduced, and the approach was
discarded.
As a workaround to ensure that the rlimit bump does not depend on the
availability of a given helper, we restore the unconditional rlimit bump
in bpftool for now.
[0] https://lore.kernel.org/bpf/20220609143614.97837-1-quentin@isovalent.com/
[1] https://github.com/cilium/ebpf/blob/v0.9.0/rlimit/rlimit.go#L39
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20220610112648.29695-2-quentin@isovalent.com
The clsk are prepared, enabled, then disabled. So if an error occurs after
the disable step, they are still prepared.
Add an error handling path to unprepare the clks in such a case, as already
done in the .remove function.
Fixes: 8b4fc246c3 ("i2c: mediatek: Optimize master_xfer() and avoid circular locking")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The dma_map_sgtable() call (used to invalidate cache) overwrites sgt->nents
with 1, so msm_iommu_pagetable_map maps only the first physical segment.
To fix this problem use for_each_sgtable_sg(), which uses orig_nents.
Fixes: b145c6e65e ("drm/msm: Add support to create a local pagetable")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20220613221019.11399-1-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
Commit e81fb4198e ("netfs: Further cleanups after struct netfs_inode
wrapper introduced") changed the argument types and names, and actually
updated the comment too (although that was thanks to David Howells, not
me: my original patch only changed the code).
But the comment fixup didn't go quite far enough, and didn't change the
argument name in the comment, resulting in
include/linux/netfs.h:314: warning: Function parameter or member 'ctx' not described in 'netfs_inode_init'
include/linux/netfs.h:314: warning: Excess function parameter 'inode' description in 'netfs_inode_init'
during htmldoc generation.
Fixes: e81fb4198e ("netfs: Further cleanups after struct netfs_inode wrapper introduced")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Unlike GCC clang uses a single compiler image to support multiple target
architectures meaning that we can't simply rely on CROSS_COMPILE to select
the output architecture. Instead we must pass --target to the compiler to
tell it what to output, kselftest was not doing this so cross compilation
of kselftest using clang resulted in kselftest being built for the host
architecture.
More work is required to fix tests using custom rules but this gets the
bulk of things building.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
[Why]
For OLED eDP the Display Manager uses max_cll value as a limit
for brightness control.
max_cll defines the content light luminance for individual pixel.
Whereas max_fall defines frame-average level luminance.
The user may not observe the difference in brightness in between
max_fall and max_cll.
That negatively impacts the user experience.
[How]
Use max_fall value instead of max_cll as a limit for brightness control.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The commit below changed the TTM manager size unit from pages to
bytes, but failed to adjust the corresponding calculations in
amdgpu_ioctl.
Fixes: dfa714b88e ("drm/amdgpu: remove GTT accounting v2")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1930
Bug: https://gitlab.freedesktop.org/mesa/mesa/-/issues/6642
Tested-by: Martin Roukala <martin.roukala@mupuf.org>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.18.x
This partially reverts a7c41b4687
Even though IORING_CLOSE_FD_AND_FILE_SLOT might save cycles for some
users, but it tries to do two things at a time and it's not clear how to
handle errors and what to return in a single result field when one part
fails and another completes well. Kill it for now.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/837c745019b3795941eee4fcfd7de697886d645b.1655224415.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
