-----BEGIN PGP SIGNATURE-----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=oBRl
-----END PGP SIGNATURE-----
Merge tag '5.19-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
"Two cifs debugging improvements - one found to deal with debugging a
multichannel problem and one for a recent fallocate issue
This does include the two larger multichannel reconnect (dynamically
adjusting interfaces on reconnect) patches, because we recently found
an additional problem with multichannel to one server type that I want
to include at the same time"
* tag '5.19-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: when a channel is not found for server, log its connection id
smb3: add trace point for SMB2_set_eof
We capture a NULL pointer issue when resizing a corrupt ext4 image which
is freshly clear resize_inode feature (not run e2fsck). It could be
simply reproduced by following steps. The problem is because of the
resize_inode feature was cleared, and it will convert the filesystem to
meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was
not reduced to zero, so could we mistakenly call reserve_backup_gdb()
and passing an uninitialized resize_inode to it when adding new group
descriptors.
mkfs.ext4 /dev/sda 3G
tune2fs -O ^resize_inode /dev/sda #forget to run requested e2fsck
mount /dev/sda /mnt
resize2fs /dev/sda 8G
========
BUG: kernel NULL pointer dereference, address: 0000000000000028
CPU: 19 PID: 3243 Comm: resize2fs Not tainted 5.18.0-rc7-00001-gfde086c5ebfd #748
...
RIP: 0010:ext4_flex_group_add+0xe08/0x2570
...
Call Trace:
<TASK>
ext4_resize_fs+0xbec/0x1660
__ext4_ioctl+0x1749/0x24e0
ext4_ioctl+0x12/0x20
__x64_sys_ioctl+0xa6/0x110
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f2dd739617b
========
The fix is simple, add a check in ext4_resize_begin() to make sure that
the es->s_reserved_gdt_blocks is zero when the resize_inode feature is
disabled.
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220601092717.763694-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since dx_make_map() may return -EFSCORRUPTED now, so change "count" to
be a signed integer so we can correctly check for an error code returned
by dx_make_map().
Fixes: 46c116b920 ("ext4: verify dir block before splitting it")
Cc: stable@kernel.org
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20220530100047.537598-1-dingxiang@cmss.chinamobile.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_mb_normalize_request() can move logical start of allocated blocks
to reduce fragmentation and better utilize preallocation. However logical
block requested as a start of allocation (ac->ac_o_ex.fe_logical) should
always be covered by allocated blocks so we should check that by
modifying and to or in the assertion.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220528110017.354175-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Hulk Robot reported a BUG_ON:
==================================================================
kernel BUG at fs/ext4/mballoc.c:3211!
[...]
RIP: 0010:ext4_mb_mark_diskspace_used.cold+0x85/0x136f
[...]
Call Trace:
ext4_mb_new_blocks+0x9df/0x5d30
ext4_ext_map_blocks+0x1803/0x4d80
ext4_map_blocks+0x3a4/0x1a10
ext4_writepages+0x126d/0x2c30
do_writepages+0x7f/0x1b0
__filemap_fdatawrite_range+0x285/0x3b0
file_write_and_wait_range+0xb1/0x140
ext4_sync_file+0x1aa/0xca0
vfs_fsync_range+0xfb/0x260
do_fsync+0x48/0xa0
[...]
==================================================================
Above issue may happen as follows:
-------------------------------------
do_fsync
vfs_fsync_range
ext4_sync_file
file_write_and_wait_range
__filemap_fdatawrite_range
do_writepages
ext4_writepages
mpage_map_and_submit_extent
mpage_map_one_extent
ext4_map_blocks
ext4_mb_new_blocks
ext4_mb_normalize_request
>>> start + size <= ac->ac_o_ex.fe_logical
ext4_mb_regular_allocator
ext4_mb_simple_scan_group
ext4_mb_use_best_found
ext4_mb_new_preallocation
ext4_mb_new_inode_pa
ext4_mb_use_inode_pa
>>> set ac->ac_b_ex.fe_len <= 0
ext4_mb_mark_diskspace_used
>>> BUG_ON(ac->ac_b_ex.fe_len <= 0);
we can easily reproduce this problem with the following commands:
`fallocate -l100M disk`
`mkfs.ext4 -b 1024 -g 256 disk`
`mount disk /mnt`
`fsstress -d /mnt -l 0 -n 1000 -p 1`
The size must be smaller than or equal to EXT4_BLOCKS_PER_GROUP.
Therefore, "start + size <= ac->ac_o_ex.fe_logical" may occur
when the size is truncated. So start should be the start position of
the group where ac_o_ex.fe_logical is located after alignment.
In addition, when the value of fe_logical or EXT4_BLOCKS_PER_GROUP
is very large, the value calculated by start_off is more accurate.
Cc: stable@kernel.org
Fixes: cd648b8a8f ("ext4: trim allocation requests to group size")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220528110017.354175-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since ext4 was converted to the new mount API, the test_dummy_encryption
mount option isn't being handled entirely correctly, because the needed
fscrypt_set_test_dummy_encryption() helper function combines
parsing/checking/applying into one function. That doesn't work well
with the new mount API, which split these into separate steps.
This was sort of okay anyway, due to the parsing logic that was copied
from fscrypt_set_test_dummy_encryption() into ext4_parse_param(),
combined with an additional check in ext4_check_test_dummy_encryption().
However, these overlooked the case of changing the value of
test_dummy_encryption on remount, which isn't allowed but ext4 wasn't
detecting until ext4_apply_options() when it's too late to fail.
Another bug is that if test_dummy_encryption was specified multiple
times with an argument, memory was leaked.
Fix this up properly by using the new helper functions that allow
splitting up the parse/check/apply steps for test_dummy_encryption.
Fixes: cebe85d570 ("ext4: switch to the new mount api")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220526040412.173025-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We got issue as follows:
[home]# mount /dev/sda test
EXT4-fs (sda): warning: mounting fs with errors, running e2fsck is recommended
[home]# dmesg
EXT4-fs (sda): warning: mounting fs with errors, running e2fsck is recommended
EXT4-fs (sda): Errors on filesystem, clearing orphan list.
EXT4-fs (sda): recovery complete
EXT4-fs (sda): mounted filesystem with ordered data mode. Quota mode: none.
[home]# debugfs /dev/sda
debugfs 1.46.5 (30-Dec-2021)
Checksum errors in superblock! Retrying...
Reason is ext4_orphan_cleanup will reset ‘s_last_orphan’ but not update
super block checksum.
To solve above issue, defer update super block checksum after
ext4_orphan_cleanup.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220525012904.1604737-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In machine_setup(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore.
Cc: stable@vger.kernel.org
Signed-off-by: Liang He <windhl@126.com>
Message-Id: <20220617115323.4046905-1-windhl@126.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
In calibrate_ccount(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore.
Cc: stable@vger.kernel.org
Signed-off-by: Liang He <windhl@126.com>
Message-Id: <20220617124432.4049006-1-windhl@126.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
cifs_ses_get_chan_index gets the index for a given server pointer.
When a match is not found, we warn about a possible bug.
However, printing details about the non-matching server could be
more useful to debug here.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Display resolution change is implemented through drm modeset. Older
modeset (resolution) has to be disabled first before newer modeset
(resolution) can be enabled. Display disable will turn off both
pixel clock and main link clock so that main link have to be
re-trained during display enable to have new video stream flow
again. At current implementation, display enable function manually
kicks up irq_hpd_handle which will read panel link status and start
link training if link status is not in sync state.
However, there is rare case that a particular panel links status keep
staying in sync for some period of time after main link had been shut
down previously at display disabled. In this case, main link retraining
will not be executed by irq_hdp_handle(). Hence video stream of newer
display resolution will fail to be transmitted to panel due to main
link is not in sync between host and panel.
This patch will bypass irq_hpd_handle() in favor of directly call
dp_ctrl_on_stream() to always perform link training in regardless of
main link status. So that no unexpected exception resolution change
failure cases will happen. Also this implementation are more efficient
than manual kicking off irq_hpd_handle function.
Changes in v2:
-- set force_link_train flag on DP only (is_edp == false)
Changes in v3:
-- revise commit text
-- add Fixes tag
Changes in v4:
-- revise commit text
Changes in v5:
-- fix spelling at commit text
Changes in v6:
-- split dp_ctrl_on_stream() for phy test case
-- revise commit text for modeset
Changes in v7:
-- drop 0 assignment at local variable (ret = 0)
Changes in v8:
-- add patch to remove pixel_rate from dp_ctrl
Changes in v9:
-- forward declare dp_ctrl_on_stream_phy_test_report()
Fixes: 62671d2ef2 ("drm/msm/dp: fixes wrong connection state caused by failure of link train")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/489895/
Link: https://lore.kernel.org/r/1655411200-7255-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
As explained in [1], using max_linewidth to limit the modes
does not seem to remove 4K modes on chipsets such as
sm8250 where the max_linewidth actually supports 4k.
This would have been alright if dual SSPP support was
present but otherwise fails the per SSPP bandwidth check.
The ideal way to implement this would be to filter out
the modes which will exceed the bandwidth check by computing
it.
But this would be an exhaustive solution till we have
dual SSPP support.
Let's instead use max_mixer_width to limit the modes.
max_mixer_width still remains 2560 on sm8250 so even if
the max_linewidth is 4096, the only way 4k modes could have
been supported is to have source split enabled on the SSPP.
Since source split support is not enabled yet in DPU driver,
enforce max_mixer_width as the upper limit on the modes.
[1] https://patchwork.freedesktop.org/patch/489662/
Fixes: e67dcecda0 ("drm/msm/dpu: limit writeback modes according to max_linewidth")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489893/
Link: https://lore.kernel.org/r/1655407606-21760-1-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
During msm initialize phase, dp_display_unbind() will be called to undo
initializations had been done by dp_display_bind() previously if there is
error happen at msm_drm_bind. In this case, core_initialized flag had to
be check to make sure clocks is on before update DP controller register
to disable HPD interrupts. Otherwise system will crash due to below NOC
fatal error.
QTISECLIB [01f01a7ad]CNOC2 ERROR: ERRLOG0_LOW = 0x00061007
QTISECLIB [01f01a7ad]GEM_NOC ERROR: ERRLOG0_LOW = 0x00001007
QTISECLIB [01f0371a0]CNOC2 ERROR: ERRLOG0_HIGH = 0x00000003
QTISECLIB [01f055297]GEM_NOC ERROR: ERRLOG0_HIGH = 0x00000003
QTISECLIB [01f072beb]CNOC2 ERROR: ERRLOG1_LOW = 0x00000024
QTISECLIB [01f0914b8]GEM_NOC ERROR: ERRLOG1_LOW = 0x00000042
QTISECLIB [01f0ae639]CNOC2 ERROR: ERRLOG1_HIGH = 0x00004002
QTISECLIB [01f0cc73f]GEM_NOC ERROR: ERRLOG1_HIGH = 0x00004002
QTISECLIB [01f0ea092]CNOC2 ERROR: ERRLOG2_LOW = 0x0009020c
QTISECLIB [01f10895f]GEM_NOC ERROR: ERRLOG2_LOW = 0x0ae9020c
QTISECLIB [01f125ae1]CNOC2 ERROR: ERRLOG2_HIGH = 0x00000000
QTISECLIB [01f143be7]GEM_NOC ERROR: ERRLOG2_HIGH = 0x00000000
QTISECLIB [01f16153a]CNOC2 ERROR: ERRLOG3_LOW = 0x00000000
QTISECLIB [01f17fe07]GEM_NOC ERROR: ERRLOG3_LOW = 0x00000000
QTISECLIB [01f19cf89]CNOC2 ERROR: ERRLOG3_HIGH = 0x00000000
QTISECLIB [01f1bb08e]GEM_NOC ERROR: ERRLOG3_HIGH = 0x00000000
QTISECLIB [01f1d8a31]CNOC2 ERROR: SBM1 FAULTINSTATUS0_LOW = 0x00000002
QTISECLIB [01f1f72a4]GEM_NOC ERROR: SBM0 FAULTINSTATUS0_LOW = 0x00000001
QTISECLIB [01f21a217]CNOC3 ERROR: ERRLOG0_LOW = 0x00000006
QTISECLIB [01f23dfd3]NOC error fatal
changes in v2:
-- drop the first patch (drm/msm: enable msm irq after all initializations are done successfully at msm_drm_init()) since the problem had been fixed by other patch
Fixes: 570d3e5d28 ("drm/msm/dp: stop event kernel thread when DP unbind")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/488387/
Link: https://lore.kernel.org/r/1654538139-7450-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
of_graph_get_remote_node() returns remote device node pointer with
refcount incremented, we should use of_node_put() on it
when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: 86418f90a4 ("drm: convert drivers to use of_graph_get_remote_node")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/488473/
Link: https://lore.kernel.org/r/20220607110841.53889-1-linmq006@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Prior to the last commit, this could result in setting the GPU
written fence value back to an older value, if we had missed
updating completed_fence prior to suspend. This was mostly
harmless as the GPU would eventually overwrite it again with
the correct value. But we should just not do this. Instead
just leave a sanity check that the fence looks plausible (in
case the GPU scribbled on memory).
Reported-by: Steev Klimaszewski <steev@kali.org>
Fixes: 95d1deb02a ("drm/msm/gem: Add fenced vma unpin")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Patchwork: https://patchwork.freedesktop.org/patch/490138/
Link: https://lore.kernel.org/r/20220618161120.3451993-2-robdclark@gmail.com
I noticed while looking at some traces, that we could miss calls to
msm_update_fence(), as the irq could have raced with retire_submits()
which could have already popped the last submit on a ring out of the
queue of in-flight submits. But walking the list of submits in the
irq handler isn't really needed, as dma_fence_is_signaled() will dtrt.
So lets just drop it entirely.
v2: use spin_lock_irqsave/restore as we are no longer protected by the
spin_lock_irqsave/restore() in update_fences()
Reported-by: Steev Klimaszewski <steev@kali.org>
Fixes: 95d1deb02a ("drm/msm/gem: Add fenced vma unpin")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Patchwork: https://patchwork.freedesktop.org/patch/490136/
Link: https://lore.kernel.org/r/20220618161120.3451993-1-robdclark@gmail.com
Using rwlock in networking code is extremely risky.
writers can starve if enough readers are constantly
grabing the rwlock.
I thought rwlock were at fault and sent this patch:
https://lkml.org/lkml/2022/6/17/272
But Peter and Linus essentially told me rwlock had to be unfair.
We need to get rid of rwlock in networking code.
Fixes: c319b4d76b ("net: ipv4: add IPPROTO_ICMP socket kind")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ax25_dev_device_up() is only called during device setup, which is
done in user context. In addition, ax25_dev_device_up()
unconditionally calls ax25_register_dev_sysctl(), which already
allocates with GFP_KERNEL.
Since it is allowed to sleep in this function, here we change
ax25_dev_device_up() to use GFP_KERNEL to reduce unnecessary
out-of-memory errors.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Lafreniere <pjlafren@mtu.edu>
Link: https://lore.kernel.org/r/20220616152333.9812-1-pjlafren@mtu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As reported by Yuming, currently tc always show a latency of UINT_MAX
for netem Qdisc's on 32-bit platforms:
$ tc qdisc add dev dummy0 root netem latency 100ms
$ tc qdisc show dev dummy0
qdisc netem 8001: root refcnt 2 limit 1000 delay 275s 275s
^^^^^^^^^^^^^^^^
Let us take a closer look at netem_dump():
qopt.latency = min_t(psched_tdiff_t, PSCHED_NS2TICKS(q->latency,
UINT_MAX);
qopt.latency is __u32, psched_tdiff_t is signed long,
(psched_tdiff_t)(UINT_MAX) is negative for 32-bit platforms, so
qopt.latency is always UINT_MAX.
Fix it by using psched_time_t (u64) instead.
Note: confusingly, users have two ways to specify 'latency':
1. normally, via '__u32 latency' in struct tc_netem_qopt;
2. via the TCA_NETEM_LATENCY64 attribute, which is s64.
For the second case, theoretically 'latency' could be negative. This
patch ignores that corner case, since it is broken (i.e. assigning a
negative s64 to __u32) anyways, and should be handled separately.
Thanks Ted Lin for the analysis [1] .
[1] https://github.com/raspberrypi/linux/issues/3512
Reported-by: Yuming Chen <chenyuming.junnan@bytedance.com>
Fixes: 112f9cb656 ("netem: convert to qdisc_watchdog_schedule_ns")
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://lore.kernel.org/r/20220616234336.2443-1-yepeilin.cs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Function fallback_set_params() checks if the module type returned
by a driver is ETH_MODULE_SFF_8079 and in this case it assumes
that buffer returns a concatenated content of page A0h and A2h.
The check is wrong because the correct type is ETH_MODULE_SFF_8472.
Fixes: 96d971e307 ("ethtool: Add fallback to get_module_eeprom from netlink command")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220616160856.3623273-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bonding ARP monitor fails to decrement send_peer_notif, the
number of peer notifications (gratuitous ARP or ND) to be sent. This
results in a continuous series of notifications.
Correct this by decrementing the counter for each notification.
Reported-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Fixes: b0929915e0 ("bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor")
Link: https://lore.kernel.org/netdev/b2fd4147-8f50-bebd-963a-1a3e8d1d9715@redhat.com/
Tested-by: Jonathan Toppins <jtoppins@redhat.com>
Reviewed-by: Jonathan Toppins <jtoppins@redhat.com>
Link: https://lore.kernel.org/r/9400.1655407960@famine
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Show correct pause frame parameters for nfp. These parameters cannot
be configured, so .set_pauseparam() is not implemented. With this
change:
#ethtool --show-pause enp1s0np0
Pause parameters for enp1s0np0:
Autonegotiate: off
RX: on
TX: on
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220616133358.135305-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-06-17
We've added 72 non-merge commits during the last 15 day(s) which contain
a total of 92 files changed, 4582 insertions(+), 834 deletions(-).
The main changes are:
1) Add 64 bit enum value support to BTF, from Yonghong Song.
2) Implement support for sleepable BPF uprobe programs, from Delyan Kratunov.
3) Add new BPF helpers to issue and check TCP SYN cookies without binding to a
socket especially useful in synproxy scenarios, from Maxim Mikityanskiy.
4) Fix libbpf's internal USDT address translation logic for shared libraries as
well as uprobe's symbol file offset calculation, from Andrii Nakryiko.
5) Extend libbpf to provide an API for textual representation of the various
map/prog/attach/link types and use it in bpftool, from Daniel Müller.
6) Provide BTF line info for RV64 and RV32 JITs, and fix a put_user bug in the
core seen in 32 bit when storing BPF function addresses, from Pu Lehui.
7) Fix libbpf's BTF pointer size guessing by adding a list of various aliases
for 'long' types, from Douglas Raillard.
8) Fix bpftool to readd setting rlimit since probing for memcg-based accounting
has been unreliable and caused a regression on COS, from Quentin Monnet.
9) Fix UAF in BPF cgroup's effective program computation triggered upon BPF link
detachment, from Tadeusz Struk.
10) Fix bpftool build bootstrapping during cross compilation which was pointing
to the wrong AR process, from Shahab Vahedi.
11) Fix logic bug in libbpf's is_pow_of_2 implementation, from Yuze Chi.
12) BPF hash map optimization to avoid grabbing spinlocks of all CPUs when there
is no free element. Also add a benchmark as reproducer, from Feng Zhou.
13) Fix bpftool's codegen to bail out when there's no BTF, from Michael Mullin.
14) Various minor cleanup and improvements all over the place.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (72 commits)
bpf: Fix bpf_skc_lookup comment wrt. return type
bpf: Fix non-static bpf_func_proto struct definitions
selftests/bpf: Don't force lld on non-x86 architectures
selftests/bpf: Add selftests for raw syncookie helpers in TC mode
bpf: Allow the new syncookie helpers to work with SKBs
selftests/bpf: Add selftests for raw syncookie helpers
bpf: Add helpers to issue and check SYN cookies in XDP
bpf: Allow helpers to accept pointers with a fixed size
bpf: Fix documentation of th_len in bpf_tcp_{gen,check}_syncookie
selftests/bpf: add tests for sleepable (uk)probes
libbpf: add support for sleepable uprobe programs
bpf: allow sleepable uprobe programs to attach
bpf: implement sleepable uprobes by chaining gps
bpf: move bpf_prog to bpf.h
libbpf: Fix internal USDT address translation logic for shared libraries
samples/bpf: Check detach prog exist or not in xdp_fwd
selftests/bpf: Avoid skipping certain subtests
selftests/bpf: Fix test_varlen verification failure with latest llvm
bpftool: Do not check return value from libbpf_set_strict_mode()
Revert "bpftool: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK"
...
====================
Link: https://lore.kernel.org/r/20220617220836.7373-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2022-06-17
We've added 12 non-merge commits during the last 4 day(s) which contain
a total of 14 files changed, 305 insertions(+), 107 deletions(-).
The main changes are:
1) Fix x86 JIT tailcall count offset on BPF-2-BPF call, from Jakub Sitnicki.
2) Fix a kprobe_multi link bug which misplaces BPF cookies, from Jiri Olsa.
3) Fix an infinite loop when processing a module's BTF, from Kumar Kartikeya Dwivedi.
4) Fix getting a rethook only in RCU available context, from Masami Hiramatsu.
5) Fix request socket refcount leak in sk lookup helpers, from Jon Maxwell.
6) Fix xsk xmit behavior which wrongly adds skb to already full cq, from Ciara Loftus.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
rethook: Reject getting a rethook if RCU is not watching
fprobe, samples: Add use_trace option and show hit/missed counter
bpf, docs: Update some of the JIT/maintenance entries
selftest/bpf: Fix kprobe_multi bench test
bpf: Force cookies array to follow symbols sorting
ftrace: Keep address offset in ftrace_lookup_symbols
selftests/bpf: Shuffle cookies symbols in kprobe multi test
selftests/bpf: Test tail call counting with bpf2bpf and data on stack
bpf, x86: Fix tail call count offset calculation on bpf2bpf call
bpf: Limit maximum modifier chain length in btf_check_type_tags
bpf: Fix request_sock leak in sk lookup helpers
xsk: Fix generic transmit when completion queue reservation fails
====================
Link: https://lore.kernel.org/r/20220617202119.2421-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GICD region was overlapping with GICR causing the latter to not map
successfully, and in turn the gic-v3 driver would fail to initialize.
This issue was hidden till commit 2b2cd74a06 ("irqchip/gic-v3: Claim
iomem resources") replaced of_iomap() calls with of_io_request_and_map()
that internally called request_mem_region().
Respective console output before this patchset:
[ 0.000000] GICv3: /bus@100000/interrupt-controller@1800000: couldn't map region 0
Fixes: b8545f9d3a ("arm64: dts: ti: Add initial support for J721S2 SoC")
Cc: linux-stable@vger.kernel.org
Cc: Marc Zyngier <maz@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20220617151304.446607-1-mranostay@ti.com
Add a special case to block_rtas_call() to allow the ibm,platform-dump RTAS
call through the RTAS filter if the buffer address is 0.
According to PAPR, ibm,platform-dump is called with a null buffer address
to notify the platform firmware that processing of a particular dump is
finished.
Without this, on a pseries machine with CONFIG_PPC_RTAS_FILTER enabled, an
application such as rtas_errd that is attempting to retrieve a dump will
encounter an error at the end of the retrieval process.
Fixes: bd59380c5b ("powerpc/rtas: Restrict RTAS requests from userspace")
Cc: stable@vger.kernel.org
Reported-by: Sathvika Vasireddy <sathvika@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220614134952.156010-1-ajd@linux.ibm.com
The platform's RNG must be available before random_init() in order to be
useful for initial seeding, which in turn means that it needs to be
called from setup_arch(), rather than from an init call. Fortunately,
each platform already has a setup_arch function pointer, which means
it's easy to wire this up. This commit also removes some noisy log
messages that don't add much.
Fixes: a489043f46 ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM")
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220611151015.548325-4-Jason@zx2c4.com
The platform's RNG must be available before random_init() in order to be
useful for initial seeding, which in turn means that it needs to be
called from setup_arch(), rather than from an init call. Fortunately,
each platform already has a setup_arch function pointer, which means
it's easy to wire this up. This commit also removes some noisy log
messages that don't add much.
Fixes: c25769fdda ("powerpc/microwatt: Add support for hardware random number generator")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220611151015.548325-2-Jason@zx2c4.com
After commit 11ac3e87ce ("mm: cma: use pageblock_order as the single
alignment") there is an error at boot about the KVM CMA reservation
failing, eg:
kvm_cma_reserve: reserving 6553 MiB for global area
cma: Failed to reserve 6553 MiB
That makes it impossible to start KVM guests using the hash MMU with
more than 2G of memory, because the VM is unable to allocate a large
enough region for the hash page table, eg:
$ qemu-system-ppc64 -enable-kvm -M pseries -m 4G ...
qemu-system-ppc64: Failed to allocate KVM HPT of order 25: Cannot allocate memory
Aneesh pointed out that this happens because when kvm_cma_reserve() is
called, pageblock_order has not been initialised yet, and is still zero,
causing the checks in cma_init_reserved_mem() against
CMA_MIN_ALIGNMENT_PAGES to fail.
Fix it by moving the call to kvm_cma_reserve() after initmem_init(). The
pageblock_order is initialised in sparse_init() which is called from
initmem_init().
Also move the hugetlb CMA reservation.
Fixes: 11ac3e87ce ("mm: cma: use pageblock_order as the single alignment")
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220616120033.1976732-1-mpe@ellerman.id.au
Remove the unwanted initialization of variable 'ret'. This fixes the clang
scan warning: Value stored to 'ret' is never read [deadcode.DeadStores]
Link: https://lkml.kernel.org/r/20220612144232.145209-1-gautammenghani201@gmail.com
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Two conditional compilation directives "#ifdef CONFIG_TRACER_MAX_TRACE"
are used consecutively, and no other code in between. Simplify conditional
the compilation code and only use one "#ifdef CONFIG_TRACER_MAX_TRACE".
Link: https://lkml.kernel.org/r/20220602140613.545069-1-sunliming@kylinos.cn
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
load_unaligned_zeropad() can lead to unwanted loads across page boundaries.
The unwanted loads are typically harmless. But, they might be made to
totally unrelated or even unmapped memory. load_unaligned_zeropad()
relies on exception fixup (#PF, #GP and now #VE) to recover from these
unwanted loads.
In TDX guests, the second page can be shared page and a VMM may configure
it to trigger #VE.
The kernel assumes that #VE on a shared page is an MMIO access and tries to
decode instruction to handle it. In case of load_unaligned_zeropad() it
may result in confusion as it is not MMIO access.
Fix it by detecting split page MMIO accesses and failing them.
load_unaligned_zeropad() will recover using exception fixups.
The issue was discovered by analysis and reproduced artificially. It was
not triggered during testing.
[ dhansen: fix up changelogs and comments for grammar and clarity,
plus incorporate Kirill's off-by-one fix]
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220614120135.14812-4-kirill.shutemov@linux.intel.com
The GPIO expander line names has been fixed in the vendor tree last year,
so upstream these changes.
Fixes: 1c701accec ("ARM: dts: Add Raspberry Pi 400 support")
Reported-by: Ivan T. Ivanov <iivanov@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
There is a small chance that get_kretprobe(ri) returns NULL in
kretprobe_dispatcher() when another CPU unregisters the kretprobe
right after __kretprobe_trampoline_handler().
To avoid this issue, kretprobe_dispatcher() checks the get_kretprobe()
return value again. And if it is NULL, it returns soon because that
kretprobe is under unregistering process.
This issue has been introduced when the kretprobe is decoupled
from the struct kretprobe_instance by commit d741bf41d7
("kprobes: Remove kretprobe hash"). Before that commit, the
struct kretprob_instance::rp directly points the kretprobe
and it is never be NULL.
Link: https://lkml.kernel.org/r/165366693881.797669.16926184644089588731.stgit@devnote2
Reported-by: Yonghong Song <yhs@fb.com>
Fixes: d741bf41d7 ("kprobes: Remove kretprobe hash")
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: bpf <bpf@vger.kernel.org>
Cc: Kernel Team <kernel-team@fb.com>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
syzbot reports:
BUG: KASAN: slab-out-of-bounds in __list_del_entry_valid+0xcc/0xf0 lib/list_debug.c:42
[..]
list_del include/linux/list.h:148 [inline]
cttimeout_net_exit+0x211/0x540 net/netfilter/nfnetlink_cttimeout.c:617
Problem is the wrong name of the list member, so container_of() result is wrong.
Reported-by: <syzbot+92968395eedbdbd3617d@syzkaller.appspotmail.com>
Fixes: 78222bacfc ("netfilter: cttimeout: decouple unlink and free on netns destruction")
Signed-off-by: Florian Westphal <fw@strlen.de>
- Bugfixes:
- Add FMODE_CAN_ODIRECT support to NFSv4 so opens don't fail
- Fix trunking detection & cl_max_connect setting
- Avoid pnfs_update_layout() livelocks
- Don't keep retrying pNFS if the server replies with NFS4ERR_UNAVAILABLE
-----BEGIN PGP SIGNATURE-----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=nTJk
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.19-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
- Add FMODE_CAN_ODIRECT support to NFSv4 so opens don't fail
- Fix trunking detection & cl_max_connect setting
- Avoid pnfs_update_layout() livelocks
- Don't keep retrying pNFS if the server replies with NFS4ERR_UNAVAILABLE
* tag 'nfs-for-5.19-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFSv4: Add FMODE_CAN_ODIRECT after successful open of a NFS4.x file
sunrpc: set cl_max_connect when cloning an rpc_clnt
pNFS: Avoid a live lock condition in pnfs_update_layout()
pNFS: Don't keep retrying if the server replied NFS4ERR_LAYOUTUNAVAILABLE
-----BEGIN PGP SIGNATURE-----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=5y1d
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fix from Bjorn Helgaas:
"Revert clipping of PCI host bridge windows to avoid E820 regions,
which broke several machines by forcing unnecessary BAR reassignments
(Hans de Goede)"
* tag 'pci-v5.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
x86/PCI: Revert "x86/PCI: Clip only host bridge windows for E820 regions"
-----BEGIN PGP SIGNATURE-----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=iiXX
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fixes from Petr Mladek:
"Make the global console_sem available for CPU that is handling panic()
or shutdown.
This is an old problem when an existing console lock owner might block
console output, but it became more visible with the kthreads"
* tag 'printk-for-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Wait for the global console lock when the system is going down
printk: Block console kthreads when direct printing will be required
Since the rethook_recycle() will involve the call_rcu() for reclaiming
the rethook_instance, the rethook must be set up at the RCU available
context (non idle). This rethook_recycle() in the rethook trampoline
handler is inevitable, thus the RCU available check must be done before
setting the rethook trampoline.
This adds a rcu_is_watching() check in the rethook_try_get() so that
it will return NULL if it is called when !rcu_is_watching().
Fixes: 54ecbe6f1e ("rethook: Add a generic return hook")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/165461827269.280167.7379263615545598958.stgit@devnote2
Add use_trace option to use trace_printk() instead of pr_info()
so that the handler doesn't involve the RCU operations.
And show the hit and missed counter so that the user can check
how many times the probe handler hit and missed.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/165461826247.280167.11939123218334322352.stgit@devnote2
Various minor updates around some of the BPF-related entries:
JITs for ARM32/NFP/SPARC/X86-32 haven't seen updates in quite a while, thus
for now, mark them as 'Odd Fixes' until they become more actively developed.
JITs for POWERPC/S390 are in good shape and receive active development and
review, thus bump to 'Supported' similar as we have with X86-64/ARM64.
JITs for MIPS/RISC-V are in similar good shape as the ones mentioned above,
but looked after mostly in spare time, thus leave for now in 'Maintained' state.
Add Michael to PPC JIT given he's picking up the patches there, so it better
reflects today's state.
Also, I haven't done much reviewing around BPF sockmap/kTLS after John and I
did the big rework back in the days to integrate sockmap with kTLS.
These days, most of this is taken care by John, Jakub {Sitnicki,Kicinski} and
others in the community, so remove myself from these two.
Lastly, move all BPF-related entries into one place, that is, move the sockmap
one over near rest of BPF.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/f9b8a63a0b48dc764bd4c50f87632889f5813f69.1655494758.git.daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
