Commit e1d9a90a9b ("net: ethernet: rmnet: Support for ingress MAPv5
checksum offload") broke ingress handling for devices where
RMNET_FLAGS_INGRESS_MAP_CKSUMV5 or RMNET_FLAGS_INGRESS_MAP_CKSUMV4 are
not set. Unless either of these flags are set, the MAP header is not
removed. This commit restores the original logic by ensuring that the
MAP header is removed for all MAP packets.
Fixes: e1d9a90a9b ("net: ethernet: rmnet: Support for ingress MAPv5 checksum offload")
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sparse tool complains as follows:
drivers/net/ethernet/amazon/ena/ena_netdev.c:978:13: warning:
symbol 'ena_alloc_map_page' was not declared. Should it be static?
This symbol is not used outside of ena_netdev.c, so marks it static.
Fixes: 947c54c395 ("net: ena: Use dev_alloc() in RX buffer allocation")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The comparisons of the u16 values priv->phycr1 and priv->phycr2 to less
than zero always false because they are unsigned. Fix this by using an
int for the assignment and less than zero check.
Addresses-Coverity: ("Unsigned compared against 0")
Fixes: 0a4355c2b7 ("net: phy: realtek: add dt property to disable CLKOUT clock")
Fixes: d90db36a9e ("net: phy: realtek: add dt property to enable ALDPS mode")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are missing { } around a block of code on an if statement. Fix this
by adding them in.
Addresses-Coverity: ("Nesting level does not match indentation")
Fixes: 46682cb86a ("net: stmmac: enable Intel mGbE 2.5Gbps link speed")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most of the time during the RX is caused by the compound_head() call
done at the end of the RX loop:
│ build_skb():
[...]
│ static inline struct page *compound_head(struct page *page)
│ {
│ unsigned long head = READ_ONCE(page->compound_head);
65.23 │ ldr x2, [x1, #8]
Prefetch the page struct as soon as possible, to speedup the RX path
noticeabily by a ~3-4% packet rate in a drop test.
│ build_skb():
[...]
│ static inline struct page *compound_head(struct page *page)
│ {
│ unsigned long head = READ_ONCE(page->compound_head);
17.92 │ ldr x2, [x1, #8]
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the RX buffer, the received data starts after a headroom used to
align the IP header and to allow prepending headers efficiently.
The prefetch() should take this into account, and prefetch from
the very start of the received data.
We can see that ether_addr_equal_64bits(), which is the first function
to access the data, drops from the top of the perf top output.
prefetch(data):
Overhead Shared Object Symbol
11.64% [kernel] [k] eth_type_trans
prefetch(data + MVPP2_MH_SIZE + MVPP2_SKB_HEADROOM):
Overhead Shared Object Symbol
13.42% [kernel] [k] build_skb
10.35% [mvpp2] [k] mvpp2_rx
9.35% [kernel] [k] __netif_receive_skb_core
8.24% [kernel] [k] kmem_cache_free
7.97% [kernel] [k] dev_gro_receive
7.68% [kernel] [k] page_pool_put_page
7.32% [kernel] [k] kmem_cache_alloc
7.09% [mvpp2] [k] mvpp2_bm_pool_put
3.36% [kernel] [k] eth_type_trans
Also, move the eth_type_trans() call a bit down, to give the RAM more
time to prefetch the data.
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The comparison of the u16 priv->phy_addr < 0 is always false because
phy_addr is unsigned. Fix this by assigning the return from the call
to function asix_read_phy_addr to int ret and using this for the
less than zero error check comparison.
Fixes: 7e88b11a86 ("net: usb: asix: refactor asix_read_phy_addr() and handle errors on return")
Addresses-Coverity: ("Unsigned compared against 0")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The comparison of the u16 priv->phy_addr < 0 is always false because
phy_addr is unsigned. Fix this by assigning the return from the call
to function asix_read_phy_addr to int ret and using this for the
less than zero error check comparison.
Addresses-Coverity: ("Unsigned compared against 0")
Fixes: e532a096be ("net: usb: asix: ax88772: add phylib support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* fix more fallout from RTNL locking changes
* fixes for some of the bugs found by syzbot
* drop multicast fragments in mac80211 to align
with the spec and what drivers are doing now
* fix NULL-ptr deref in radiotap injection
-----BEGIN PGP SIGNATURE-----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=evzy
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-net-2021-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes berg says:
====================
A fair number of fixes:
* fix more fallout from RTNL locking changes
* fixes for some of the bugs found by syzbot
* drop multicast fragments in mac80211 to align
with the spec and what drivers are doing now
* fix NULL-ptr deref in radiotap injection
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In normal situations where the driver doesn't dereference
"nsim_node->ddir" or "nsim_node->rate_parent" itself then we are not
supposed to check the return from debugfs functions. In the case of
debugfs_create_dir() the check was wrong as well because it doesn't
return NULL, it returns error pointers.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This code check "reg" but "ret" was intended so the error handling will
never trigger.
Fixes: 7c9896e378 ("net: dsa: qca8k: check return value of read functions correctly")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The "hi" variable is a u64 but the qca8k_read() writes to the top 32
bits of it. That will work on little endian systems but it's a bit
subtle. It's cleaner to make declare "hi" as a u32. We will still need
to cast it when we shift it later on in the function but that's fine.
Fixes: 7c9896e378 ("net: dsa: qca8k: check return value of read functions correctly")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the chackpatch.pl,
line length of 123 exceeds 100 columns, so fix it.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the chackpatch.pl, comparison to NULL could
be written "lapbeth_get_x25_dev".
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Networking block comments don't use an empty /* line,
use /* Comment...
Block comments use * on subsequent lines.
Block comments use a trailing */ on a separate line.
This patch fixes the comments style issues.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes unnecessary out of memory message,
to fix the following checkpatch.pl warning:
"WARNING: Possible unnecessary 'out of memory' message"
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes trailing whitespaces.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Should not use assignment in if condition.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the checkpatch error about missing a blank line
after declarations.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using list_move_tail() instead of list_del() + list_add_tail() in hclge_main.c.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using list_move_tail() instead of list_del() + list_add_tail() in hclgevf_main.c.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using list_move() instead of list_del() + list_add() in nfp_cppcore.c.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use devm_platform_get_and_ioremap_resource() to simplify
code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit ca89319483 ("net: dsa: b53: Keep CPU port as tagged in all
VLANs") forced the CPU port to be always tagged in any VLAN membership.
This was necessary back then because we did not support Broadcom tags
for all configurations so the only way to differentiate tagged and
untagged traffic while DSA_TAG_PROTO_NONE was used was to force the CPU
port into being always tagged.
With most configurations enabling Broadcom tags, especially after
8fab459e69 ("net: dsa: b53: Enable Broadcom tags for 531x5/539x
families") we do not need to apply this unconditional force tagging of
the CPU port in all VLANs.
A helper function is introduced to faciliate the encapsulation of the
specific condition requiring the CPU port to be tagged in all VLANs and
the dsa_switch_ops::untag_bridge_pvid boolean is moved to when
dsa_switch_ops::setup is called when we have already determined the
tagging protocol we will be using.
Reported-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit ae15e0ba1b ("ice: Change number of XDP Tx queues to match
number of Rx queues") tried to address the incorrect setting of XDP
queue count that was based on the Tx queue count, whereas in theory we
should provide the XDP queue per Rx queue. However, the routines that
setup and destroy the set of Tx resources are still based on the
vsi->num_txq.
Ice supports the asynchronous Tx/Rx queue count, so for a setup where
vsi->num_txq > vsi->num_rxq, ice_vsi_stop_tx_rings and ice_vsi_cfg_txqs
will be accessing the vsi->xdp_rings out of the bounds.
Parameterize two mentioned functions so they get the size of Tx resources
array as the input.
Fixes: ae15e0ba1b ("ice: Change number of XDP Tx queues to match number of Rx queues")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice driver requires a programmable pipeline firmware package in order to
have a support for advanced features. Otherwise, driver falls back to so
called 'safe mode'. For that mode, ndo_bpf callback is not exposed and
when user tries to load XDP program, the following happens:
$ sudo ./xdp1 enp179s0f1
libbpf: Kernel error message: Underlying driver does not support XDP in native mode
link set xdp fd failed
which is sort of confusing, as there is a native XDP support, but not in
the current mode. Improve the user experience by providing the specific
ndo_bpf callback dedicated for safe mode which will make use of extack
to explicitly let the user know that the DDP package is missing and
that's the reason that the XDP can't be loaded onto interface currently.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Fixes: efc2214b60 ("ice: Add support for XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This patch fixes TX hangs with threaded NAPI enabled. The scheduled
NAPI seems to be executed in parallel with the interrupt on second
thread. Sometimes it happens that ltq_dma_disable_irq() is executed
after xrx200_tx_housekeeping(). The symptom is that TX interrupts
are disabled in the DMA controller. As a result, the TX hangs after
a few seconds of the iperf test. Scheduling NAPI after disabling
interrupts fixes this issue.
Tested on Lantiq xRX200 (BT Home Hub 5A).
Fixes: 9423361da5 ("net: lantiq: Disable IRQs only if NAPI gets scheduled ")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
We are currently assuming that GMAC_AHB_RESET will already be deasserted
by the bootloader. However if this has not been done, probing of the GMAC
will fail. To remedy this we must ensure GMAC_AHB_RESET has been deasserted
prior to probing.
v2 changes:
- remove NULL condition check for stmmac_ahb_rst in stmmac_main.c
- unwrap dev_err() message in stmmac_main.c
- add PTR_ERR() around plat->stmmac_ahb_rst in stmmac_platform.c
v3 changes:
- add error pointer to dev_err() output
- add reset_control_assert(stmmac_ahb_rst) in stmmac_dvr_remove
- revert PTR_ERR() around plat->stmmac_ahb_rst since this is performed
on the returned value of ret by the calling function
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes several bugs found when (DMA/LLQ) mapping a packet for
transmission. The mapping procedure makes the transmitted packet
accessible by the device.
When using LLQ, this requires copying the packet's header to push header
(which would be passed to LLQ) and creating DMA mapping for the payload
(if the packet doesn't fit the maximum push length).
When not using LLQ, we map the whole packet with DMA.
The following bugs are fixed in the code:
1. Add support for non-LLQ machines:
The ena_xdp_tx_map_frame() function assumed that LLQ is
supported, and never mapped the whole packet using DMA. On some
instances, which don't support LLQ, this causes loss of traffic.
2. Wrong DMA buffer length passed to device:
When using LLQ, the first 'tx_max_header_size' bytes of the
packet would be copied to push header. The rest of the packet
would be copied to a DMA'd buffer.
3. Freeing the XDP buffer twice in case of a mapping error:
In case a buffer DMA mapping fails, the function uses
xdp_return_frame_rx_napi() to free the RX buffer and returns from
the function with an error. XDP frames that fail to xmit get
freed by the kernel and so there is no need for this call.
Fixes: 548c4940b9 ("net: ena: Implement XDP_TX action")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use devm_platform_get_and_ioremap_resource() to simplify
code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use devm_platform_get_and_ioremap_resource() and
devm_platform_ioremap_resource_byname to simplify
code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of relying on the static initialization done by ocelot_init_port()
which enables flow control unconditionally, set SYS_PAUSE_CFG_PAUSE_ENA
according to the parameters negotiated by the PHY.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Because flow control is set up statically in ocelot_init_port(), and not
in phylink_mac_link_up(), what happens is that after the blamed commit,
the flow control remains disabled after the port flushing procedure.
Fixes: eb4733d7cf ("net: dsa: felix: implement port flushing on .phylink_mac_link_down")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert list_for_each() to list_for_each_entry() where
applicable. This simplifies the code.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
priv->plat->mdio_bus_data is optional, some platforms may not set it,
however we proceed to look straight at priv->plat->mdio_bus_data->has_xpcs.
Since the xpcs is instantiated based on the has_xpcs property, we can
avoid looking at the priv->plat->mdio_bus_data structure altogether and
just check for the presence of the xpcs pointer.
Fixes: 11059740e6 ("net: pcs: xpcs: convert to phylink_pcs_ops")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert list_for_each() to list_for_each_entry() where
applicable. This simplifies the code.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During initialization, the driver logs and clears the hw errors that
already occurred. For device supports imp-handle ras capability, it
needs handle different error status, otherwise it may cause wrong reset.
So fix it by adding a new processing branch.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update error recovery module and type for RoCE.
The enumeration values of module names and error types are not sorted
in sequence. If use the current printing mode, they cannot be correctly
printed.
Use the index mode, If mod_id and type_id match the enumerated value,
display the corresponding information.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IMP(Intelligent Management Processor) firmware add a new feature to
handle and consolidate RAS information for new devices, NIC driver
only needs to query the reported RAS information. NIC driver adds
support for this feature.
Driver queries device capability to check whether IMP support this
feature, If yes, execute the new RAS processing branch.
In order to add a method to check whether PF supports imp-handle RAS
feature, add dumping this info in debugfs.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To adapt to hardware modification and ensure that the driver is
compatible with the original error handling content, we need to add the
RAS compatibility adaptation solution.
Add a processing branch to the driver during error handling. In the new
processing branch, NIC fault information is integrated by the IMP. An
interaction command is added between the driver and IMP to query
and clear the fault source and interrupt source. The IMP integrates
error information and reports the highest reset level to the driver.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, hardware errors can be reported through AER or MSI-X mode.
However, the AER mode is intended to handle only bus errors, but not
hardware errors. On the other hand, virtual machines cannot handle
AER errors. When an AER error is reported, virtual machines will be
suspended. So add support for handling all these hardware errors
through MSI-X mode which depends on a newer version of firmware,
and reserve the handler of the AER mode for compatibility.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Restructure some ethtool to a switch-case blocks to make it more uniform
with other similar functions.
Also restructure variable declaration to create reversed x-mas tree.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use dev_alloc() when allocating RX buffers instead of specifying the
allocation flags explicitly. This result in same behaviour with less
code.
Also move the page allocation and its DMA mapping into a function. This
creates a logical block, which may help understanding the code.
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ena_ring_tx_doorbell() is introduced to call the doorbell and
increase the driver's corresponding stat.
Signed-off-by: Ido Segev <idose@amazon.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
