This patch removes some redundant blank lines.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce steering header insert/remove and switchdev bridge offloads
1) From Yevgeny, Steering header insert/remove support
ConnectX supports offloading of various encapsulations and decapsulations
(e.g. VXLAN), which are performed by 'Packet Reformat' action.
Starting with ConnectX-6 DX, a new reformat type is supported - INSERT_HEADER.
This reformat allows inserting an arbitrary size buffer at a selected location
in the packet on RX flows.
The insert/remove header support are needed as a prerequisite for the
bridge offloads vlan pop/push supprt, see below.
2) From Vlad, Support for bridge offloads for switchdev mode
This change implements bridge offloads with VLAN-support that works on top
of mlx5 representors in switchdev mode.
HIGH-LEVEL OVERVIEW
Hardware supported by mlx5 driver doesn't provide dynamic learning or aging
functionality and requires the driver to emulate all switch-like behavior
in software. As such, all packets by default go through miss path, appear
on representor and get to software bridge, if it is the upper device of the
representor. This causes bridge to process packet in software, learn the
MAC address to FDB and send SWITCHDEV_FDB_ADD_TO_DEVICE event to all
subscribers. Upon reception of SWITCHDEV_FDB_ADD_TO_DEVICE notification
mlx5 bridge offloads the FDB to hardware and sends back
SWITCHDEV_FDB_ADD_TO_BRIDGE notification to prevent such entries from being
aged out by kernel bridge. Leaving aging to kernel bridge would result
deletion of offloaded dynamic FDB entries every aging_time period due to
packets being processed by hardware and, consecutively, 'used' timestamp
for FDB entry not being updated. Hardware aging is emulated in driver by
running periodic workqueue task that manually updates the rules according
to their hardware counter:
- If hardware counter has changed since last update, the handler updates
'used' timestamp in kernel bridge dynamic entry by sending
SWITCHDEV_FDB_ADD_TO_BRIDGE notification for the entry.
- If FDB entry wasn't updated for user-controllable aging_time period,
then the FDB entry is unoffloaded from hardware and corresponding
SWITCHDEV_FDB_DEL_TO_BRIDGE notification is sent to kernel bridge.
The mlx5 bridge offload implementation fully supports port VLAN objects,
including PVID (vlan push) and "Egress Untagged" (vlan pop).
SOFTWARE ARCHITECTURE
Mlx5_eswitch is extended with pointer to new mlx5_esw_bridge_offloads
structure which has a linked list of mlx5_esw_bridge objects. Struct
mlx5_esw_bridge is the main switch object in mlx5 that holds all data for
offloaded FDB entries and metadata for bridge ports and their vlans. The
mlx5_esw_bridge object is created when first representor of eswitch vport
is added to bridge and deleted when the last representor is detached from
it. Bridge FDB entries are saved in linked list (to iterate over all FDB
entries in aging workqueue task) and also in hashtable for quick lookup by
MAC+VLAN tuple. Bridge FDB entries are saved in linked list (to iterate
over all FDB entries in aging workqueue task) and in hashtable for quick
lookup by MAC+VLAN tuple. Port metadata is stored in struct
mlx5_esw_bridge_port that is saved in xarray to allow quick lookup by vport
number. Part of the port metadata is the set of port vlans that are
represented by mlx5_esw_bridge_vlan structure. The vlan structure points to
all FDBs on vlan/port via fdb_list linked list.
Simplified diagram of mlx5 bridge objects:
+------------------+
| mxl5_eswitch |
| |
| br_offloads |
+--------+---------+
|
+--------v-------------------+
| mlx5_esw_bridge_offloads |
| |
+--> bridges |
| +-------+--------------------+
| |
| |
| +---v---------------+
| | mlx5_esw_bridge |
| | |
| | vports |
| | |
| | fdb_ht |
| +---+---------------+
| |
| +---v---------------+
+------+ mlx5_esw_bridge |
| |
+-------------------------+ vports |
| | |
| | fdb_ht +------------------------------------------+
| +-------------------+ |
| |
| |
| +----------------------+ +---------------------------+ |
+-> mlx5_esw_bridge_port | +--> mlx5_esw_bridge_fdb_entry <-+
| | | +----------------------+ | +--+------------------------+ |
| | vlans +--+-> mlx5_esw_bridge_vlan | | | |
| | | | | | | +--v------------------------+ |
| +----------------------+ | | fdb_list +--+ | mlx5_esw_bridge_fdb_entry <-+
| | +-------^--------------+ +--+------------------------+ |
| +----------------------+ | | | |
+-> mlx5_esw_bridge_port | | +-----------------------+ |
| | | |
| vlans | | -----------------------+ |
| | +-> mlx5_esw_bridge_vlan | |
+----------------------+ | | +---------------------------+ |
| fdb_list +-----> mlx5_esw_bridge_fdb_entry <-+
+-------^--------------+ +--+------------------------+
| |
+-----------------------+
HARDWARE REPRESENTATION
In order to adhere to kernel software datapath model bridge offloads must
come after TC and NF FDBs. However, since netfilter offload in mlx5 is
implemented with unmanaged tables, its miss path is not automatically
connected to next priority and requires the code to manually connect with
slow table. To keep bridge offloads encapsulated and not mix it with
eswitch offloads new FDB_TC_MISS priority is created between FDB_FT_OFFLOAD
and FDB_SLOW_PATH which allows bridge offloads to be created without
exposing its internal tables to any other modules since miss path of
managed TC-miss table is automatically wired to next priority.
The bridge tables are created with new priority FDB_BR_OFFLOAD in FDB
namespace. The new priority is between tc-miss and slow path priorities.
Priority consist of two levels: the ingress table that is global per
eswitch and matches incoming packets by src_mac/vid and redirects them to
next level (egress table) that is chosen according to ingress port bridge
membership and matches on dst_mac/vid in order to redirect packet to vport
according to the following diagram:
+
|
+---------v----------+
| |
| FDB_TC_OFFLOAD |
| |
+---------+----------+
|
|
+---------v----------+
| |
| FDB_FT_OFFLOAD |
| |
+---------+----------+
|
|
+---------v----------+
| |
| FDB_TC_MISS |
| |
+---------+----------+
|
+--------------------------------------+
| | |
| +------+ |
| | |
| +------v--------+ FDB_BR_OFFLOAD |
| | INGRESS_TABLE | |
| +------+---+----+ |
| | | match |
| | +---------+ |
| | | | +-------+
| | +-------v-------+ match | | |
| | | EGRESS_TABLE +------------> vport |
| | +-------+-------+ | | |
| | | | +-------+
| | miss | |
| +------+------+ |
| | |
+--------------------------------------+
|
|
+---------v----------+
| |
| FDB_SLOW_PATH |
| |
+---------+----------+
|
v
PATCHES OVERVIEW
1-3 - Miscellaneous refactorings and infrastructure changes.
4 - Mlx5 bridge offload infrastructure and dedicated fs_core
namespace/tables implementation.
5 - FDB entry offload.
6 - Dynamic FDB entry aging.
7-10 - VLAN filtering offload.
11 - Tracepoints for main mlx5 bridge offload events (FDB entry
offload/unoffload, VLAN add/delete, etc.)
--
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmDBbIwACgkQSD+KveBX
+j6BzwgAs7zTxCwsqYC+Zw77p0C+UwEpoq9e8aARkZXY9PExQi7SHG2LswN1JX3C
MPf1nczNnos9D+P9VgbUWJP/3agtdYFbTu03toOl1W6pPRY7MVqrV14twT1zP7zA
xDqSZvYJ1jZKNVsITzdwWh0u7PDrxKpYefaKYe7b3ghNbAOqCEReF61zMTg4pu4c
LUkLx2f+diaQHY6TyQnUAMMH5O3j0bDF8JUbQK0ZX1+a1guP99t1zZKY35aBB1uQ
GcwUSGEaThU71O8whOx4kaIjLyk2kNM4rP1WxZo8V9gFu81/FJ5XNISdd7XWjOsI
z2Qf2Zu8xqXyjRF8cA5n0OIcK2UDrQ==
=oe1K
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2021-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2021-06-09
Introduce steering header insert/remove and switchdev bridge offloads
1) From Yevgeny, Steering header insert/remove support
ConnectX supports offloading of various encapsulations and decapsulations
(e.g. VXLAN), which are performed by 'Packet Reformat' action.
Starting with ConnectX-6 DX, a new reformat type is supported - INSERT_HEADER.
This reformat allows inserting an arbitrary size buffer at a selected location
in the packet on RX flows.
The insert/remove header support are needed as a prerequisite for the
bridge offloads vlan pop/push supprt, see below.
2) From Vlad, Support for bridge offloads for switchdev mode
This change implements bridge offloads with VLAN-support that works on top
of mlx5 representors in switchdev mode.
HIGH-LEVEL OVERVIEW
Hardware supported by mlx5 driver doesn't provide dynamic learning or aging
functionality and requires the driver to emulate all switch-like behavior
in software. As such, all packets by default go through miss path, appear
on representor and get to software bridge, if it is the upper device of the
representor. This causes bridge to process packet in software, learn the
MAC address to FDB and send SWITCHDEV_FDB_ADD_TO_DEVICE event to all
subscribers. Upon reception of SWITCHDEV_FDB_ADD_TO_DEVICE notification
mlx5 bridge offloads the FDB to hardware and sends back
SWITCHDEV_FDB_ADD_TO_BRIDGE notification to prevent such entries from being
aged out by kernel bridge. Leaving aging to kernel bridge would result
deletion of offloaded dynamic FDB entries every aging_time period due to
packets being processed by hardware and, consecutively, 'used' timestamp
for FDB entry not being updated. Hardware aging is emulated in driver by
running periodic workqueue task that manually updates the rules according
to their hardware counter:
- If hardware counter has changed since last update, the handler updates
'used' timestamp in kernel bridge dynamic entry by sending
SWITCHDEV_FDB_ADD_TO_BRIDGE notification for the entry.
- If FDB entry wasn't updated for user-controllable aging_time period,
then the FDB entry is unoffloaded from hardware and corresponding
SWITCHDEV_FDB_DEL_TO_BRIDGE notification is sent to kernel bridge.
The mlx5 bridge offload implementation fully supports port VLAN objects,
including PVID (vlan push) and "Egress Untagged" (vlan pop).
SOFTWARE ARCHITECTURE
Mlx5_eswitch is extended with pointer to new mlx5_esw_bridge_offloads
structure which has a linked list of mlx5_esw_bridge objects. Struct
mlx5_esw_bridge is the main switch object in mlx5 that holds all data for
offloaded FDB entries and metadata for bridge ports and their vlans. The
mlx5_esw_bridge object is created when first representor of eswitch vport
is added to bridge and deleted when the last representor is detached from
it. Bridge FDB entries are saved in linked list (to iterate over all FDB
entries in aging workqueue task) and also in hashtable for quick lookup by
MAC+VLAN tuple. Bridge FDB entries are saved in linked list (to iterate
over all FDB entries in aging workqueue task) and in hashtable for quick
lookup by MAC+VLAN tuple. Port metadata is stored in struct
mlx5_esw_bridge_port that is saved in xarray to allow quick lookup by vport
number. Part of the port metadata is the set of port vlans that are
represented by mlx5_esw_bridge_vlan structure. The vlan structure points to
all FDBs on vlan/port via fdb_list linked list.
Simplified diagram of mlx5 bridge objects:
+------------------+
| mxl5_eswitch |
| |
| br_offloads |
+--------+---------+
|
+--------v-------------------+
| mlx5_esw_bridge_offloads |
| |
+--> bridges |
| +-------+--------------------+
| |
| |
| +---v---------------+
| | mlx5_esw_bridge |
| | |
| | vports |
| | |
| | fdb_ht |
| +---+---------------+
| |
| +---v---------------+
+------+ mlx5_esw_bridge |
| |
+-------------------------+ vports |
| | |
| | fdb_ht +------------------------------------------+
| +-------------------+ |
| |
| |
| +----------------------+ +---------------------------+ |
+-> mlx5_esw_bridge_port | +--> mlx5_esw_bridge_fdb_entry <-+
| | | +----------------------+ | +--+------------------------+ |
| | vlans +--+-> mlx5_esw_bridge_vlan | | | |
| | | | | | | +--v------------------------+ |
| +----------------------+ | | fdb_list +--+ | mlx5_esw_bridge_fdb_entry <-+
| | +-------^--------------+ +--+------------------------+ |
| +----------------------+ | | | |
+-> mlx5_esw_bridge_port | | +-----------------------+ |
| | | |
| vlans | | -----------------------+ |
| | +-> mlx5_esw_bridge_vlan | |
+----------------------+ | | +---------------------------+ |
| fdb_list +-----> mlx5_esw_bridge_fdb_entry <-+
+-------^--------------+ +--+------------------------+
| |
+-----------------------+
HARDWARE REPRESENTATION
In order to adhere to kernel software datapath model bridge offloads must
come after TC and NF FDBs. However, since netfilter offload in mlx5 is
implemented with unmanaged tables, its miss path is not automatically
connected to next priority and requires the code to manually connect with
slow table. To keep bridge offloads encapsulated and not mix it with
eswitch offloads new FDB_TC_MISS priority is created between FDB_FT_OFFLOAD
and FDB_SLOW_PATH which allows bridge offloads to be created without
exposing its internal tables to any other modules since miss path of
managed TC-miss table is automatically wired to next priority.
The bridge tables are created with new priority FDB_BR_OFFLOAD in FDB
namespace. The new priority is between tc-miss and slow path priorities.
Priority consist of two levels: the ingress table that is global per
eswitch and matches incoming packets by src_mac/vid and redirects them to
next level (egress table) that is chosen according to ingress port bridge
membership and matches on dst_mac/vid in order to redirect packet to vport
according to the following diagram:
+
|
+---------v----------+
| |
| FDB_TC_OFFLOAD |
| |
+---------+----------+
|
|
+---------v----------+
| |
| FDB_FT_OFFLOAD |
| |
+---------+----------+
|
|
+---------v----------+
| |
| FDB_TC_MISS |
| |
+---------+----------+
|
+--------------------------------------+
| | |
| +------+ |
| | |
| +------v--------+ FDB_BR_OFFLOAD |
| | INGRESS_TABLE | |
| +------+---+----+ |
| | | match |
| | +---------+ |
| | | | +-------+
| | +-------v-------+ match | | |
| | | EGRESS_TABLE +------------> vport |
| | +-------+-------+ | | |
| | | | +-------+
| | miss | |
| +------+------+ |
| | |
+--------------------------------------+
|
|
+---------v----------+
| |
| FDB_SLOW_PATH |
| |
+---------+----------+
|
v
PATCHES OVERVIEW
1-3 - Miscellaneous refactorings and infrastructure changes.
4 - Mlx5 bridge offload infrastructure and dedicated fs_core
namespace/tables implementation.
5 - FDB entry offload.
6 - Dynamic FDB entry aging.
7-10 - VLAN filtering offload.
11 - Tracepoints for main mlx5 bridge offload events (FDB entry
offload/unoffload, VLAN add/delete, etc.)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
--
Use devm_platform_get_and_ioremap_resource() to simplify
code and avoid a null-ptr-deref by checking 'res' in it.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use devm_platform_get_and_ioremap_resource() to simplify
code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PHY devices such as the Marvell Alaska 88E2110 does not return a valid
PHY ID when probed using Clause-22. The current implementation treats
PHY ID of zero as a non-error and valid PHY ID, and causing the PHY
device failed to bind to the Marvell driver.
For such devices, we do an additional probe in the Clause-45 space,
if a valid PHY ID is returned, we then proceed to attach the PHY
device to the matching PHY ID driver.
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
A mixture of small bug fixes and a small security issue:
- WARN_ON when IPoIB is automatically moved between namespaces
- Long standing bug where mlx5 would use the wrong page for the doorbell
recovery memory if fork is used
- Security fix for mlx4 that disables the timestamp feature
- Several crashers for mlx5
- Plug a recent mlx5 memory leak for the sig_mr
-----BEGIN PGP SIGNATURE-----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=crsk
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"A mixture of small bug fixes and a small security issue:
- WARN_ON when IPoIB is automatically moved between namespaces
- Long standing bug where mlx5 would use the wrong page for the
doorbell recovery memory if fork is used
- Security fix for mlx4 that disables the timestamp feature
- Several crashers for mlx5
- Plug a recent mlx5 memory leak for the sig_mr"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/mlx5: Fix initializing CQ fragments buffer
RDMA/mlx5: Delete right entry from MR signature database
RDMA: Verify port when creating flow rule
RDMA/mlx5: Block FDB rules when not in switchdev mode
RDMA/mlx4: Do not map the core_clock page to user space unless enabled
RDMA/mlx5: Use different doorbell memory for different processes
RDMA/ipoib: Fix warning caused by destroying non-initial netns
With support for pvid vlans in mlx5 bridge it is possible to have rules in
untagged flow group when vlan filtering is enabled. However, such rules can
also match tagged packets that didn't match anything in tagged flow group.
Filter such packets by introducing additional flow group between tagged and
untagged groups. When filtering is enabled on the bridge create additional
flow in vlan filtering flow group and matches tagged packets with specified
source MAC address and redirects them to new "skip" table. The skip table
is new lowest-level empty table that is used to skip all further processing
on packet in bridge priority.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Implement support for pushing vlan header into untagged packet on ingress
of port that has pvid configured and support for popping vlan on egress of
port that has the matching vlan configured as untagged. To support such
configurations packet reformat contexts of {INSERT|REMOVE}_HEADER types are
created per such vlan and saved to struct mlx5_esw_bridge_vlan which allows
all FDB entries on particular vlan to share single packet reformat
instance. When initializing FDB entries with pvid or untagged vlan type set
its mlx5_flow_act->pkt_reformat action accordingly.
Flush all flows when removing vlan from port. This is necessary because
even though software bridge removes all FDB entries before removing their
vlan, mlx5 bridge implementation deletes their corresponding flow entries
from hardware in asynchronous workqueue task, which will cause firmware
error if vlan packet reformat context is deleted before all flows that
point to it.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add support for FDB vlan-tagged entries. Extend ingress and egress flow
tables with flow groups to match packet vlan tag. Modify the flow creation
code to include vlan tag, if vlan is configured on port and vlan
configuration is supported for offload.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Establish all the necessary infrastructure for implementing vlan matching
and vlan push/pop in following patches:
- Add new per-vport struct mlx5_esw_bridge_port that is used to store
metadata for all port vlans. Initialize and cleanup the instance of the
structure when port representor is linked/unliked to bridge. Use xarray to
allow quick vport metadata lookup by vport number.
- Add new per-port-vlan struct mlx5_esw_bridge_vlan that is used to store
vlan-specific data (vid, flags). Handle SWITCHDEV_PORT_OBJ_{ADD|DEL}
switchdev blocking event for SWITCHDEV_OBJ_ID_PORT_VLAN object by
creating/deleting the vlan structure and saving it in per-vport xarray for
quick lookup.
- Implement support for SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING object
attribute that is used to toggle vlan filtering. Remove all FDB entries
from hardware when vlan filtering state is changed.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Dynamic FDB entries require capability to age out unused entries. Such
entries are either aged out by kernel software bridge implementation or by
hardware switch that offloaded them (and notified the kernel to mark them
as SWITCHDEV_FDB_ADD_TO_BRIDGE). Leaving ageing to kernel bridge would
result it deleting offloaded dynamic FDB entries every ageing_time period
due to packets being processed by hardware and, consecutively, 'used'
timestamp for FDB entry not being updated. However, since hardware doesn't
support ageing, software solution inside the driver is required.
In order to emulate hardware ageing in driver, extend bridge FDB ingress
flows with counter and create delayed br_offloads->update_work task on
bridge offloads workqueue. Run the task every second, update 'used'
timestamp in software bridge dynamic entry by sending
SWITCHDEV_FDB_ADD_TO_BRIDGE for the entry, if it flow hardware counter
lastuse field was changed since last update. If lastuse wasn't changed for
ageing_time period, then delete the FDB entry and notify kernel bridge by
sending SWITCHDEV_FDB_DEL_TO_BRIDGE notification.
Register blocking switchdev notifier callback and handle attribute set
SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME event to allow user to dynamically
configure bridge FDB entry ageing timeout. Save the value per-bridge in
struct mlx5_esw_bridge. Silently ignore
SWITCHDEV_ATTR_ID_PORT_{PRE_}BRIDGE_FLAGS switchdev event since mlx5 bridge
implementation relies on software bridge for implementing necessary
behavior for all of these flags.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Hardware supported by mlx5 driver doesn't provide learning and requires the
driver to emulate all switch-like behavior in software. As such, all
packets by default go through miss path, appear on representor and get to
software bridge, if it is the upper device of the representor. This causes
bridge to process packet in software, learn the MAC address to FDB and send
SWITCHDEV_FDB_ADD_TO_DEVICE event to all subscribers.
In order to offload FDB entries in mlx5, register switchdev notifier
callback and implement support for both 'added_by_user' and dynamic FDB
entry SWITCHDEV_FDB_ADD_TO_DEVICE events asynchronously using new
mlx5_esw_bridge_offloads->wq ordered workqueue. In workqueue callback
offload the ingress rule (matching FDB entry MAC as packet source MAC) and
egress table rule (matching FDB entry MAC as destination MAC). For ingress
table rule also match source vport to ensure that only traffic coming from
expected bridge port is matched by offloaded rule. Save all the relevant
FDB entry data in struct mlx5_esw_bridge_fdb_entry instance and insert the
instance in new mlx5_esw_bridge->fdb_list list (for traversing all entries
by software ageing implementation in following patch) and in new
mlx5_esw_bridge->fdb_ht hash table for fast retrieval. Notify the bridge
that FDB entry has been offloaded by sending SWITCHDEV_FDB_OFFLOADED
notification.
Delete FDB entry on reception of SWITCHDEV_FDB_DEL_TO_DEVICE event.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Create new files bridge.{c|h} in en/rep directory that implement bridge
interaction with representor netdevices and handle required
events/notifications, bridge.{c|h} in esw directory that implement all
necessary eswitch offloading infrastructure and works on vport/eswitch
level. Provide new kconfig MLX5_BRIDGE which is automatically selected when
both kernel bridge and mlx5 eswitch configs are enabled.
Provide basic infrastructure for bridge offloads:
- struct mlx5_esw_bridge_offloads - per-eswitch bridge offload structure
that encapsulates generic bridge-offloads data (notifier blocks, ingress
flow table/group, etc.) that is created/deleted on enable/disable eswitch
offloads.
- struct mlx5_esw_bridge - per-bridge structure that encapsulates
per-bridge data (reference counter, FDB, egress flow table/group, etc.)
that is created when first eswitch represetor is attached to new bridge and
deleted when last representor is removed from the bridge as a result of
NETDEV_CHANGEUPPER event.
The bridge tables are created with new priority FDB_BR_OFFLOAD in FDB
namespace. The new priority is between tc-miss and slow path priorities.
Priority consist of two levels: the ingress table that is global per
eswitch and matches incoming packets by src_mac/vid and redirects them to
next level (egress table) that is chosen according to ingress port bridge
membership and matches on dst_mac/vid in order to redirect packet to vport
according to the following diagram:
+
|
+---------v----------+
| |
| FDB_TC_OFFLOAD |
| |
+---------+----------+
|
|
+---------v----------+
| |
| FDB_FT_OFFLOAD |
| |
+---------+----------+
|
|
+---------v----------+
| |
| FDB_TC_MISS |
| |
+---------+----------+
|
+--------------------------------------+
| | |
| +------+ |
| | |
| +------v--------+ FDB_BR_OFFLOAD |
| | INGRESS_TABLE | |
| +------+---+----+ |
| | | match |
| | +---------+ |
| | | | +-------+
| | +-------v-------+ match | | |
| | | EGRESS_TABLE +------------> vport |
| | +-------+-------+ | | |
| | | | +-------+
| | miss | |
| +------+------+ |
| | |
+--------------------------------------+
|
|
+---------v----------+
| |
| FDB_SLOW_PATH |
| |
+---------+----------+
|
v
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Change the helper to functions to accept constant pointer to struct
net_device. This is necessary for following patches in series that pass
mlx5e_eswitch_rep() as a callback to kernel bridge infrastructure code.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In order to adhere to kernel software datapath model bridge offloads must
come after TC and NF FDBs. Following patches in this series add new FDB
priority for bridge after FDB_FT_OFFLOAD. However, since netfilter offload
is implemented with unmanaged tables, its miss path is not automatically
connected to next priority and requires the code to manually connect with
slow table. To keep bridge offloads encapsulated and not mix it with
eswitch offloads, create a new FDB_TC_MISS priority between FDB_FT_OFFLOAD
and FDB_SLOW_PATH:
+
|
+---------v----------+
| |
| FDB_TC_OFFLOAD |
| |
+---------+----------+
|
|
|
+---------v----------+
| |
| FDB_FT_OFFLOAD |
| |
+---------+----------+
|
|
|
+---------v----------+
| |
| FDB_TC_MISS |
| |
+---------+----------+
|
|
|
+---------v----------+
| |
| FDB_SLOW_PATH |
| |
+---------+----------+
|
v
Initialize the new priority with single default empty managed table and use
the table as TC/NF miss patch instead of slow table. This approach allows
bridge offloads to be created as new FDB namespace priority between
FDB_TC_MISS and FDB_SLOW_PATH without exposing its internal tables to any
other modules since miss path of managed TC-miss table is automatically
wired to next priority.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add support for EMD tag in modify header set/copy actions
on device that supports STEv1.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Adding new reformat context type (INSERT_HEADER) requires adding two new
parameters to reformat context - reformat_param_0 and reformat_param_1.
As defined by HW spec, these parameters have different meaning for
different reformat context type.
The first parameter (reformat_param_0) is not new to HW spec, but it
wasn't used by any of the supported reformats. The second parameter
(reformat_param_1) is new to the HW spec - it was added to allow
supporting INSERT_HEADER.
For NSERT_HEADER, reformat_param_0 indicates the header used to
reference the location of the inserted header, and reformat_param_1
indicates the offset of the inserted header from the reference point
defined by reformat_param_0.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Encap actions on RX flow were not supported on older devices.
However, this is no longer the case in devices that support STEv1.
This patch adds support for encap l3/l2 on RX flow for supported
devices: update actions state machine by adding the newely supported
transitions and add the required support in STEv0/1 files.
The new transitions that are supported are:
- from decap/modify-header/pop-vlan to encap
- from encap to termination table
Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Split single reformat state into two separate states for encap and decap.
This will allow adding actions to the specific domain, such as encap on RX.
Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add support for HCA caps 2 that contains capabilities for the new
insert/remove header actions.
Added the required definitions for supporting the new reformat type:
added packet reformat parameters, reformat anchors and definitions
to allow copy/set into the inserted EMD (Embedded MetaData) tag.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The device is able to offload either the outer header csum or inner
header csum. The driver utilizes the inner csum offload. So, prohibit
setting of tx-gre-csum-segmentation and let it be: off[fixed].
Fixes: 2729984149 ("net/mlx5e: Support TSO and TX checksum offloads for GRE tunnels")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The device is able to offload either the outer header csum or inner
header csum. The driver utilizes the inner csum offload. Hence, block
setting of tx-udp_tnl-csum-segmentation and set it to off[fixed].
Fixes: b49663c8fb ("net/mlx5e: Add support for UDP tunnel segmentation with outer checksum offload")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In the scenario described below, an EQ can remain in FIRED state which
can result in missing an interrupt generation.
The scenario:
device mlx5_core driver
------ ----------------
EQ1.eqe generated
EQ1.MSI-X sent
EQ1.state = FIRED
EQ2.eqe generated
mlx5_irq()
polls - eq1_eqes()
arm eq1
polls - eq2_eqes()
arm eq2
EQ2.MSI-X sent
EQ2.state = FIRED
mlx5_irq()
polls - eq2_eqes() -- no eqes found
driver skips EQ arming;
->EQ2 remains fired, misses generating interrupt.
Hence, always arm the EQ by reverting the cited commit in fixes tag.
Fixes: d894892dda ("net/mlx5: Arm only EQs with EQEs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Steering packets to PTP-SQ should be done only if the SKB has
SKBTX_HW_TSTAMP set in the tx_flags. While here, take the function into
a header and inline it.
Set the whole condition to select the PTP-SQ to unlikely.
Fixes: 24c22dd091 ("net/mlx5e: Add states to PTP channel")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Since the driver opens the PTP-RQ under channel 0, it appears to the
stack as if the SKB was received on rxq0. So from thew stack POV there
are still the same number of RX queues.
Fixes: 960fbfe222 ("net/mlx5e: Allow coexistence of CQE compression and HW TS PTP")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
SW steering uses RC QP to write/read to/from ICM, hence it's not
supported when RoCE is not supported as well.
Fixes: 70605ea545 ("net/mlx5: DR, Expose APIs for direct rule managing")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Check if RoCE is supported by the device before enable it in
the vport context and create all the RDMA steering objects.
Fixes: 80f09dfc23 ("net/mlx5: Eswitch, enable RoCE loopback traffic")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently, IPsec feature is disabled because mlx5e_build_nic_netdev
is required to be called after mlx5e_ipsec_init. This requirement is
invalid as mlx5e_build_nic_netdev and mlx5e_ipsec_init initialize
independent resources.
Remove ipsec pointer check in mlx5e_build_nic_netdev so that the
two functions can be called at any order.
Fixes: 547eede070 ("net/mlx5e: IPSec, Innova IPSec offload infrastructure")
Signed-off-by: Huy Nguyen <huyn@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Function mlx5e_rep_neigh_update() wasn't updated to accommodate rtnl lock
removal from TC filter update path and properly handle concurrent encap
entry insertion/deletion which can lead to following use-after-free:
[23827.464923] ==================================================================
[23827.469446] BUG: KASAN: use-after-free in mlx5e_encap_take+0x72/0x140 [mlx5_core]
[23827.470971] Read of size 4 at addr ffff8881d132228c by task kworker/u20:6/21635
[23827.472251]
[23827.472615] CPU: 9 PID: 21635 Comm: kworker/u20:6 Not tainted 5.13.0-rc3+ #5
[23827.473788] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[23827.475639] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core]
[23827.476731] Call Trace:
[23827.477260] dump_stack+0xbb/0x107
[23827.477906] print_address_description.constprop.0+0x18/0x140
[23827.478896] ? mlx5e_encap_take+0x72/0x140 [mlx5_core]
[23827.479879] ? mlx5e_encap_take+0x72/0x140 [mlx5_core]
[23827.480905] kasan_report.cold+0x7c/0xd8
[23827.481701] ? mlx5e_encap_take+0x72/0x140 [mlx5_core]
[23827.482744] kasan_check_range+0x145/0x1a0
[23827.493112] mlx5e_encap_take+0x72/0x140 [mlx5_core]
[23827.494054] ? mlx5e_tc_tun_encap_info_equal_generic+0x140/0x140 [mlx5_core]
[23827.495296] mlx5e_rep_neigh_update+0x41e/0x5e0 [mlx5_core]
[23827.496338] ? mlx5e_rep_neigh_entry_release+0xb80/0xb80 [mlx5_core]
[23827.497486] ? read_word_at_a_time+0xe/0x20
[23827.498250] ? strscpy+0xa0/0x2a0
[23827.498889] process_one_work+0x8ac/0x14e0
[23827.499638] ? lockdep_hardirqs_on_prepare+0x400/0x400
[23827.500537] ? pwq_dec_nr_in_flight+0x2c0/0x2c0
[23827.501359] ? rwlock_bug.part.0+0x90/0x90
[23827.502116] worker_thread+0x53b/0x1220
[23827.502831] ? process_one_work+0x14e0/0x14e0
[23827.503627] kthread+0x328/0x3f0
[23827.504254] ? _raw_spin_unlock_irq+0x24/0x40
[23827.505065] ? __kthread_bind_mask+0x90/0x90
[23827.505912] ret_from_fork+0x1f/0x30
[23827.506621]
[23827.506987] Allocated by task 28248:
[23827.507694] kasan_save_stack+0x1b/0x40
[23827.508476] __kasan_kmalloc+0x7c/0x90
[23827.509197] mlx5e_attach_encap+0xde1/0x1d40 [mlx5_core]
[23827.510194] mlx5e_tc_add_fdb_flow+0x397/0xc40 [mlx5_core]
[23827.511218] __mlx5e_add_fdb_flow+0x519/0xb30 [mlx5_core]
[23827.512234] mlx5e_configure_flower+0x191c/0x4870 [mlx5_core]
[23827.513298] tc_setup_cb_add+0x1d5/0x420
[23827.514023] fl_hw_replace_filter+0x382/0x6a0 [cls_flower]
[23827.514975] fl_change+0x2ceb/0x4a51 [cls_flower]
[23827.515821] tc_new_tfilter+0x89a/0x2070
[23827.516548] rtnetlink_rcv_msg+0x644/0x8c0
[23827.517300] netlink_rcv_skb+0x11d/0x340
[23827.518021] netlink_unicast+0x42b/0x700
[23827.518742] netlink_sendmsg+0x743/0xc20
[23827.519467] sock_sendmsg+0xb2/0xe0
[23827.520131] ____sys_sendmsg+0x590/0x770
[23827.520851] ___sys_sendmsg+0xd8/0x160
[23827.521552] __sys_sendmsg+0xb7/0x140
[23827.522238] do_syscall_64+0x3a/0x70
[23827.522907] entry_SYSCALL_64_after_hwframe+0x44/0xae
[23827.523797]
[23827.524163] Freed by task 25948:
[23827.524780] kasan_save_stack+0x1b/0x40
[23827.525488] kasan_set_track+0x1c/0x30
[23827.526187] kasan_set_free_info+0x20/0x30
[23827.526968] __kasan_slab_free+0xed/0x130
[23827.527709] slab_free_freelist_hook+0xcf/0x1d0
[23827.528528] kmem_cache_free_bulk+0x33a/0x6e0
[23827.529317] kfree_rcu_work+0x55f/0xb70
[23827.530024] process_one_work+0x8ac/0x14e0
[23827.530770] worker_thread+0x53b/0x1220
[23827.531480] kthread+0x328/0x3f0
[23827.532114] ret_from_fork+0x1f/0x30
[23827.532785]
[23827.533147] Last potentially related work creation:
[23827.534007] kasan_save_stack+0x1b/0x40
[23827.534710] kasan_record_aux_stack+0xab/0xc0
[23827.535492] kvfree_call_rcu+0x31/0x7b0
[23827.536206] mlx5e_tc_del_fdb_flow+0x577/0xef0 [mlx5_core]
[23827.537305] mlx5e_flow_put+0x49/0x80 [mlx5_core]
[23827.538290] mlx5e_delete_flower+0x6d1/0xe60 [mlx5_core]
[23827.539300] tc_setup_cb_destroy+0x18e/0x2f0
[23827.540144] fl_hw_destroy_filter+0x1d2/0x310 [cls_flower]
[23827.541148] __fl_delete+0x4dc/0x660 [cls_flower]
[23827.541985] fl_delete+0x97/0x160 [cls_flower]
[23827.542782] tc_del_tfilter+0x7ab/0x13d0
[23827.543503] rtnetlink_rcv_msg+0x644/0x8c0
[23827.544257] netlink_rcv_skb+0x11d/0x340
[23827.544981] netlink_unicast+0x42b/0x700
[23827.545700] netlink_sendmsg+0x743/0xc20
[23827.546424] sock_sendmsg+0xb2/0xe0
[23827.547084] ____sys_sendmsg+0x590/0x770
[23827.547850] ___sys_sendmsg+0xd8/0x160
[23827.548606] __sys_sendmsg+0xb7/0x140
[23827.549303] do_syscall_64+0x3a/0x70
[23827.549969] entry_SYSCALL_64_after_hwframe+0x44/0xae
[23827.550853]
[23827.551217] The buggy address belongs to the object at ffff8881d1322200
[23827.551217] which belongs to the cache kmalloc-256 of size 256
[23827.553341] The buggy address is located 140 bytes inside of
[23827.553341] 256-byte region [ffff8881d1322200, ffff8881d1322300)
[23827.555747] The buggy address belongs to the page:
[23827.556847] page:00000000898762aa refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1d1320
[23827.558651] head:00000000898762aa order:2 compound_mapcount:0 compound_pincount:0
[23827.559961] flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff)
[23827.561243] raw: 002ffff800010200 dead000000000100 dead000000000122 ffff888100042b40
[23827.562653] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
[23827.564112] page dumped because: kasan: bad access detected
[23827.565439]
[23827.565932] Memory state around the buggy address:
[23827.566917] ffff8881d1322180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[23827.568485] ffff8881d1322200: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[23827.569818] >ffff8881d1322280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[23827.571143] ^
[23827.571879] ffff8881d1322300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[23827.573283] ffff8881d1322380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[23827.574654] ==================================================================
Most of the necessary logic is already correctly implemented by
mlx5e_get_next_valid_encap() helper that is used in neigh stats update
handler. Make the handler generic by renaming it to
mlx5e_get_next_matching_encap() and use callback to test whether flow is
matching instead of hardcoded check for 'valid' flag value. Implement
mlx5e_get_next_valid_encap() by calling mlx5e_get_next_matching_encap()
with callback that tests encap MLX5_ENCAP_ENTRY_VALID flag. Implement new
mlx5e_get_next_init_encap() helper by calling
mlx5e_get_next_matching_encap() with callback that tests encap completion
result to be non-error and use it in mlx5e_rep_neigh_update() to safely
iterate over nhe->encap_list.
Remove encap completion logic from mlx5e_rep_update_flows() since the encap
entries passed to this function are already guaranteed to be properly
initialized by similar code in mlx5e_get_next_init_encap().
Fixes: 2a1f1768fa ("net/mlx5e: Refactor neigh update for concurrent execution")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When the code execute 'if (!priv->fs.arfs->wq)', the value of err is 0.
So, we use -ENOMEM to indicate that the function
create_singlethread_workqueue() return NULL.
Clean up smatch warning:
drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c:373
mlx5e_arfs_create_tables() warn: missing error code 'err'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: f6755b80d6 ("net/mlx5e: Dynamic alloc arfs table for netdev when needed")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In ipa_mem_valid(), wait until regions have been marked in the memory
region bitmap, and check all that are not found there to ensure they
are not required.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test in ipa_mem_valid() to ensure no memory region is defined
more than once, using a bitmap to record each defined memory region.
Skip over undefined regions when checking (we can have any number of
those).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce ipa_mem_id_valid(), and use it to check defined memory
regions to ensure they are valid for a given version of IPA.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a new function that indicates whether a given memory
region is required for a given version of IPA hardware. Use it to
verify that all required regions are present during initialization.
Reorder the definitions of the memory region IDs to be based on
the version in which they're first defined. Use "+" rather than
"and above" where defining the IPA versions in which memory IDs are
used, and indicate which regions are optional (many are not).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass the memory configuration data array to ipa_mem_valid() for
validation, and use that rather than assuming it's already been
recorded in the IPA structure. Move the memory data array size
check into ipa_mem_valid().
Call ipa_mem_valid() early in ipa_mem_init(), and only proceed with
assigning the memory array pointer and size if it is found to be
valid.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the memory region validation check so it happens earlier when
initializing the driver, at init time rather than config time (i.e.,
before access to hardware is required).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The only thing done by ipa_mem_valid_one() that requires hardware
access is the check for whether all regions fit within the size of
IPA local memory specified by an IPA register.
Introduce ipa_mem_size_valid() to implement this verification and
stop doing so in ipa_mem_valid_one(). Call the new function from
ipa_mem_config() (which is also the caller of ipa_mem_valid()).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, memory regions are validated in the loop that initializes
them. Instead, validate them separately.
Rename ipa_mem_valid() to be ipa_mem_valid_one(). Define a *new*
function named ipa_mem_valid() that performs validation of the array
of memory regions provided. This function calls ipa_mem_valid_one()
for each region in turn.
Skip validation for any "empty" region descriptors, which have zero
size and are not preceded by any canary values. Issue a warning for
such descriptors if the offset is non-zero.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Do memory region descriptor validation unconditionally, rather than
having it depend on IPA_VALIDATION being defined.
Pass the address of a memory region descriptor rather than a memory
ID to ipa_mem_valid().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Store the memory region ID in the memory descriptor structure. This
is a move toward *not* indexing the array by the ID, but for now we
must still specify those index values. Define an explicitly
undefined region ID, value 0, so uninitialized entries in the array
won't use an otherwise valid ID.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Define a new pseudo memory region identifer that specifies the
offset at the end of IPA resident memory. Use it instead of
IPA_MEM_UC_EVENT_RING in places where the size of that region was
defined to be 0.
The size of the IPA_MEM_END_MARKER pseudo region must be zero.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The return code variable rc is being set to return error values in two
places in sja1105_mdiobus_base_tx_register and yet it is not being
returned, the function always returns 0 instead. Fix this by replacing
the return 0 with the return code rc.
Addresses-Coverity: ("Unused value")
Fixes: 5a8f09748e ("net: dsa: sja1105: register the MDIO buses for 100base-T1 and 100base-TX")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-06-09
This series contains updates to ice driver only.
Maciej informs the user when XDP is not supported due to the driver
being in the 'safe mode' state. He also adds a parameter to Tx queue
configuration to resolve an issue in configuring XDP queues as it cannot
rely on using the number Tx or Rx queues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
To support XDP, a headroom is prepended to the packet data.
Consider this offset when doing a prefetch.
Fixes: da5ec7f22a ("net: stmmac: refactor stmmac_init_rx_buffers for stmmac_reinit_rx_buffers")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The call to mlxsw_thermal_module_temp_and_thresholds_get passes a NULL
pointer for the temperature and this can be dereferenced in this function
if the mlxsw_reg_query call fails. The simplist fix is to pass the
address of dummy temperature variable instead of a NULL pointer.
Addresses-Coverity: ("Explicit null dereferenced")
Fixes: 72a64c2fe9 ("mlxsw: thermal: Read module temperature thresholds using MTMP register")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
