The OnePlus 6 and 6T feature a BQ27411 fuel gauge for reading the
battery stats. Enable it and add a simple battery to document the
battery specs of each device.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220120184546.499030-1-caleb@connolly.tech
This is needed due changes in commit 0519d1d0bf ("clk: qcom:
gcc-msm8994: Modernize the driver"), which removed struct
clk_fixed_factor. Preparation for next commit for enabling SD/eMMC.
Inspired by 2c2f64ae36.
This is required for both msm8994-huawei-angler (sdhc1 will be enabled
in next commit) and msm8992-lg-bullhead (where actually fixes sdhc1
- tested on bullhead rev 1.01).
Fixes: 0519d1d0bf ("clk: qcom: gcc-msm8994: Modernize the driver")
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220113233358.17972-4-petr.vorel@gmail.com
This change updates/corrects below cpuidle parameters
1. entry-latency, exit-latency and residency for various idle states.
2. arm,psci-suspend-param which is same for CLUSTER_SLEEP_0/1 states.
3. Add CLUSTER_SLEEP_1 in CLUSTER_PD.
Cc: devicetree@vger.kernel.org
Fixes: 5188049c9b ("arm64: dts: qcom: Add base SM8450 DTSI")
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
[bjorn: Split domain-idle-states, per Ulf's request]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1641749107-31979-5-git-send-email-quic_mkshah@quicinc.com
On IPQ8074, 4MB of memory is needed for TZ. So mark that region
as reserved.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
[bjorn: Squash with existing reserved-memory node]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1641560078-860-1-git-send-email-quic_kathirav@quicinc.com
IPQ8074 uses SMEM like other modern QCA SoC-s, so since its already
supported by the kernel add the required DT nodes.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220106212512.1970828-1-robimarko@gmail.com
This reverts commit c23f1b7735.
The SM6125_VDDCX constant was replaced with 0 temporarily as the header
patch defining this constant resided in a different branch, creating an
unwanted dependency of the dts branch on the drivers branch.
Now (by the time this patch will be applied) that both branches have
been merged upstream, it is safe to revert to the constant again.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211229220117.293542-1-marijn.suijten@somainline.org
Follow common pattern for this device, first specific
and then generic compatible.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211227215238.113956-1-david@ixit.cz
dt-schema expect to have fallback compatible, which is now in-place.
Fixes warning generated by `make qcom/sdm845-oneplus-fajita.dtb`:
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: power-controller@c300000: compatible: ['qcom,sdm845-aoss-qmp'] is too short
From schema: Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
Signed-off-by: David Heidelberg <david@ixit.cz>
Komu: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211220211443.106754-1-david@ixit.cz
QCOM BAM parses property `qcom,controlled-remotely` as a boolean,
adjust dts to reflect that.
Discovered while converting text documentation into yaml format.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211220145526.49102-1-david@ixit.cz
The msm8998 cache nodes have some issues. First, L1 caches are described
within cpu nodes, not as separate nodes. The 'next-level-cache' property
is of course in the correct location, otherwise the cache hierarchy
walking would not work. Remove all the L1 cache nodes.
Second, 'arm,arch-cache' is not a documented compatible string. "cache"
is a sufficient compatible string for the Arm architected caches.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211217211136.3536443-1-robh@kernel.org
Since commit d0a6ce59ea ("arm64: dts: qcom: sm8150: Add support for
SONY Xperia 1 / 5 (Kumano platform)"), we can directly refer to pwrkey
and resin by their new labels, respectively pon_pwrkey and pon_resin.
Simplify microsof surface duo DTS by utilizing the new labels.
Signed-off-by: Felipe Balbi <felipe.balbi@microsoft.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211217124546.1192281-1-balbi@kernel.org
By listing relevant DMA channels for the various QUPv3 instances, we
can work on adding support for DMA to the respective drivers.
Signed-off-by: Felipe Balbi <felipe.balbi@microsoft.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211216124348.370059-1-balbi@kernel.org
Pure effort to avoid `make dtbs_check` warnings about memory@ nodes, which
should have property device_type set to memory.
Fixes warnings as:
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: memory@f5b00000: 'device_type' is a required property
From schema: dtschema/schemas/memory.yaml
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211214234648.23369-1-david@ixit.cz
Replace (unused) enable-gpio binding with schema-defined wake-gpios. The
GPIO line is still unused, but at least we'd follow the defined schema.
While we are at it, change perst-gpio property to follow the preferred
naming schema (perst-gpios).
Fixes: 13e948a36d ("arm64: dts: qcom: sm8250: Commonize PCIe pins")
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211214231448.2044987-1-dmitry.baryshkov@linaro.org
qcom,apq8016-sbc-sndcard is now covered by the qcom,sm8250.yaml schema
which has slightly different recommendations for the naming of
properties and nodes. The old naming is still functional but
deprecated. Update the &sound node in apq8016-sbc to fix the following
dtbs_check warnings:
apq8016-sbc.dt.yaml: sound@7702000: 'model' is a required property
From schema: sound/qcom,sm8250.yaml
apq8016-sbc.dt.yaml: sound@7702000: 'external-dai-link@0', ...
do not match any of the regexes: '.*-dai-link$', ...
From schema: sound/qcom,sm8250.yaml
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211214135124.2380-1-stephan@gerhold.net
Rename thermal zones according to dt-schema.
Fixes multiple `make dtbs_check` warnings about name convetion.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211214132750.69782-1-david@ixit.cz
Since 'qcom,apr-domain' is deprecated in favor of 'qcom,domain',
update accordingly.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211214102451.29084-1-david@ixit.cz
replace millivolt with correct microvolt and adjust value to
the minimal value allowed by documentation.
Found with `make qcom/sdm845-oneplus-fajita.dtb`.
Fixes:
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias1-microvolt' is a required property
From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias2-microvolt' is a required property
From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias3-microvolt' is a required property
From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias4-microvolt' is a required property
From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias1-millivolt', 'qcom,micbias2-millivolt', 'qcom,micbias3-millivolt', 'qcom,micbias4-millivolt' do not match any of the regexes: '^.*@[0-9a-f]+$', 'pinctrl-[0-9]+'
Fixes: 27ca1de07d ("arm64: dts: qcom: sdm845: add slimbus nodes")
Signed-off-by: David Heidelberg <david@ixit.cz>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213195105.114596-1-david@ixit.cz
The clock-lanes property is no longer used as it is not programmable by
the CSIPHY hardware block of Qcom ISPs and should be removed.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211206154003.39892-3-robert.foss@linaro.org
The clock-lanes property is no longer used as it is not programmable by
the CSIPHY hardware block of Qcom ISPs and should be removed.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211206154003.39892-2-robert.foss@linaro.org
This commit implements a DTS file for LG Bullhead (Nexus 5X) rev 1.0
with its matching "qcom,board-id" property.
Signed-off-by: Jean THOMAS <virgule@jeanthomas.me>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211201231832.188634-2-virgule@jeanthomas.me
This patch puts the generic code common across all hardware revisions
into a DTSI file.
It also prefixes the DTS filename with the vendor name, to follow the
naming convention used by other DTS files.
Signed-off-by: Jean THOMAS <virgule@jeanthomas.me>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211201231832.188634-1-virgule@jeanthomas.me
Though sc7280 itself doesn't need any of the defines in gpio.h, it's
highly likely that the actual boards will use them. Let's add the
include to the sc7280.dtsi file so that boards don't need to do it.
Suggested-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220125144316.v2.4.I3194c8bdb2ad3212665286fa273710a3c4840e94@changeid
This factors out a device tree fragment from some sc7280 device
trees. It represents the device tree bits that should be included for
"Chrome" based sc7280 boards. On these boards the bootloader (Coreboot
+ Depthcharge) configures things slightly different than the
bootloader that Qualcomm provides. The modem firmware on these boards
also works differently than on other Qulacomm products and thus the
reserved memory map needs to be adjusted.
NOTES:
- This is _not_ quite a no-op change. The "herobrine" and "idp"
fragments here were different and it looks like someone simply
forgot to update the herobrine version. This updates a few numbers
to match IDP. This will also cause the `pmk8350_pon` to be disabled
on idp/crd, which I belive is a correct change.
- At the moment this assumes LTE skus. Once it's clearer how WiFi SKUs
will work (how much of the memory map they can reclaim) we may add
an extra fragment that will rejigger one way or the other.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220125144316.v2.3.Iac012fa8d727be46448d47027a1813ea716423ce@changeid
The upcoming herobrine-r1 board is really not very similar to
herobrine-r0. Let's get rid of the "herobrine.dtsi" file and stick all
the content in the -r0 dts file directly. We'll also rename the dts so
it's obvious that it's just for -r0.
While renaming, let's actually name the file so it's obvious that
"herobrine" is both the name of the board and the name of the
"baseboard". In other words "herobrine" is an actual board but also
often used as the name of a whole class of similar boards that forked
from a design. While "herobrine-herobrine" is a bit of mouthful it
makes it more obvious which things are part of an actual board rather
than the baseboard.
NOTE: herobrine-rev0's days are likely doomed and this device tree is
likely to be deleted in the future.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220125144316.v2.2.Id9716db8c133bcb14c9413144048f8d00ae2674f@changeid
When processing sc7280 device trees, I can see:
Warning (simple_bus_reg): /soc@0/gmu@3d69000:
simple-bus unit address format error, expected "3d6a000"
There's a clear typo in the node name. Fix it.
Fixes: 96c471970b ("arm64: dts: qcom: sc7280: Add gpu support")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220125144316.v2.1.I19f60014e9be4b9dda4d66b5d56ef3d9600b6e10@changeid
Add the camera clock controller node for SC7280 SoC.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124184437.9278-1-tdas@codeaurora.org
Some trogdor boards have on-board regulators for the MIPI camera
components. Add nodes describing these regulators so boards with these
supplies can consume them.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211216044529.733652-1-swboyd@chromium.org
Move USB2 controller and phy nodes from common dtsi file as it is
required only for SKU1 board and change the mode to host mode as
it will be used in host mode for SKU1.
Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1638422248-24221-1-git-send-email-quic_c_sanm@quicinc.com
