Currently, pick_next_entity(...) has the following structure
(simplified):
[...]
if (last_buddy_ok())
result = last_buddy;
if (next_buddy_ok())
result = next_buddy;
[...]
The intended behavior is to prefer next buddy over last buddy;
the current code somewhat obfuscates this, and also wastes
cycles checking the last buddy when eventually the next buddy is
picked up.
So this patch refactors two 'ifs' above into
[...]
if (next_buddy_ok())
result = next_buddy;
else if (last_buddy_ok())
result = last_buddy;
[...]
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guitttot@linaro.org>
Link: https://lkml.kernel.org/r/20200930173532.1069092-1-posk@google.com
Most of changes are on dwc3 (38.8%) with cdns3 falling close
behind (24.1%).
The biggest changes here are a series of non-critical fixes to corner
cases on dwc3, produced by Thinh N, and a series of major improvements
to cdns3 produced by Peter C.
We also have the traditional set of new device support (Intel Keem
Bay, Hikey 970) on dwc3. A series of sparse/coccinelle and checkpatch
fixes on dwc3 by yours truly and a set of minor changes all over the
stack.
-----BEGIN PGP SIGNATURE-----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=e08s
-----END PGP SIGNATURE-----
Merge tag 'usb-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
USB: changes for v5.10 merge window
Most of changes are on dwc3 (38.8%) with cdns3 falling close
behind (24.1%).
The biggest changes here are a series of non-critical fixes to corner
cases on dwc3, produced by Thinh N, and a series of major improvements
to cdns3 produced by Peter C.
We also have the traditional set of new device support (Intel Keem
Bay, Hikey 970) on dwc3. A series of sparse/coccinelle and checkpatch
fixes on dwc3 by yours truly and a set of minor changes all over the
stack.
* tag 'usb-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (117 commits)
usb: dwc2: Fix INTR OUT transfers in DDMA mode.
usb: dwc2: don't use ID/Vbus detection if usb-role-switch on STM32MP15 SoCs
usb: dwc2: override PHY input signals with usb role switch support
dt-bindings: usb: dwc2: add optional usb-role-switch property
usb: dwc3: of-simple: Add compatible string for Intel Keem Bay platform
dt-bindings: usb: Add Intel Keem Bay USB controller bindings
usb: dwc3: gadget: Support up to max stream id
usb: dwc3: gadget: Return early if no TRB update
usb: dwc3: gadget: Keep TRBs in request order
usb: dwc3: gadget: Revise setting IOC when no TRB left
usb: dwc3: gadget: Look ahead when setting IOC
usb: dwc3: gadget: Allow restarting a transfer
usb: bdc: remove duplicated error message
usb: dwc3: Stop active transfers before halting the controller
usb: cdns3: gadget: enlarge the TRB ring length
usb: cdns3: gadget: sg_support is only for DEV_VER_V2 or above
usb: cdns3: gadget: need to handle sg case for workaround 2 case
usb: cdns3: gadget: handle sg list use case at completion correctly
usb: cdns3: gadget: add CHAIN and ISP bit for sg list use case
usb: cdns3: gadget: improve the dump TRB operation at cdns3_ep_run_transfer
...
Rewrite i2c operations from i2c client read/write to regmap i2c. As
a result, most private functions now accept the private driver data
instead of an i2c client pointer.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Tested-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Two actions were performed during remove - power supply dereg and
delayed work cleanup. Power supply dereg can be handled by using the
devm_ version of the registration function. Work cleanup can be added as
a devm_action.
If probe fails after psy registration it will now be cleaned up
properly.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Tested-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Currently the sign for CURRENT_NOW and CURRENT_AVG is a bit
of a mess. There are basically 3 different ways battery fuel
gauges report the current:
1. uses negative values for discharging and positive values
for charging
2. uses positive values for discharging and negative values
for discharging (opposit of 1)
3. only uses positive values
As a result userspace currently cannot use the sign at all in
a generic way. Let's solve the issue by documenting a canonical
way for reporting the data and ensure new drivers follow this
way. Then existing drivers can be fixed on a case-by-case basis.
The 'negative value = battery discharging' has been choosen,
since there are only very few drivers doing it the other way
around.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
- Fix synchronization of VTTBR update on TLB invalidation for nVHE systems
-----BEGIN PGP SIGNATURE-----
iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl91qtQPHG1hekBrZXJu
ZWwub3JnAAoJECPQ0LrRPXpD2eoQAKEpLbbWycXVKikz+O1yev8EELmWMpvV/7uM
Q+4+FjO2swcb5FEPBw6hicZKXIFRi7AP3xFp6hKuWyLfdnYST+WOf5KCI1DcDdG+
/+5bpiS9F1Z+K9Inm6XwpXCnWFuo1P8i1T65mT5HKIm/9+zRwFY5X8svXXvnP4h1
OVgDSI+8jn14yf9aMnvznmvAiSN9GXiVt4v3h9W/1B5FWw3sUT1bTdFIwjh4q7M5
Q32fLeWYdLqTnFOaYtLJNRElE9JSUFkwNpSg1nqoFUH+8gK5oBEEnhzdPzJ9figz
tXrMKlWylswX3ySHSe1L2m9hekwwF3p/h3r4QlpbR2feI8jhOG9mG1YNvPSCdgKh
xWDXWLUnymw4EZGyREeFdMe26gg4xVKqNnVB7Na3PFOSQklg6oqdcUyQccgyWd/6
i8ePA+djVFA/C+iVanv/xphAalT0DmNEe3isBSxkt0RZcrLoCDBoOsTRTRQv8d+y
xBwl3k/DAfGtYjJwntxUNjuQUOzn9E3cc/L/z4Y0ON+sYGzDbv9cPU2oMNyrqFTj
/AZVumCxz3gjjBah62iu7m0hkXIrh7H86ua/dAn/CC0dtAAcANQn+2373C02IPN9
ntCEjc+8aMdw4yph31Ngxd/IT6CQxCOpVJd++kzP5BpLvysUsUGy1M/3Hsd1c88v
hKWU5aS4
=YFeP
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/arm64 fixes for 5.9, take #3
- Fix synchronization of VTTBR update on TLB invalidation for nVHE systems
The PFEC_MASK and PFEC_MATCH fields in the VMCS reverse the meaning of
the #PF intercept bit in the exception bitmap when they do not match.
This means that, if PFEC_MASK and/or PFEC_MATCH are set, the
hypervisor can get a vmexit for #PF exceptions even when the
corresponding bit is clear in the exception bitmap.
This is unexpected and is promptly detected by a WARN_ON_ONCE.
To fix it, reset PFEC_MASK and PFEC_MATCH when the #PF intercept
is disabled (as is common with enable_ept && !allow_smaller_maxphyaddr).
Reported-by: Qian Cai <cai@redhat.com>>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that import_iovec handles compat iovecs, the native version of
keyctl_instantiate_key_iov can be used for the compat case as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that import_iovec handles compat iovecs, the native syscalls
can be used for the compat case as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that import_iovec handles compat iovecs, the native vmsplice syscall
can be used for the compat case as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that import_iovec handles compat iovecs, the native readv and writev
syscalls can be used for the compat case as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that import_iovec handles compat iovecs as well, all the duplicated
code in the compat readv/writev helpers is not needed. Remove them
and switch the compat syscall handlers to use the native helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use in compat_syscall to import either native or the compat iovecs, and
remove the now superflous compat_import_iovec.
This removes the need for special compat logic in most callers, and
the remaining ones can still be simplified by using __import_iovec
with a bool compat parameter.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Split rw_copy_check_uvector into two new helpers with more sensible
calling conventions:
- iovec_from_user copies a iovec from userspace either into the provided
stack buffer if it fits, or allocates a new buffer for it. Returns
the actually used iovec. It also verifies that iov_len does fit a
signed type, and handles compat iovecs if the compat flag is set.
- __import_iovec consolidates the native and compat versions of
import_iovec. It calls iovec_from_user, then validates each iovec
actually points to user addresses, and ensures the total length
doesn't overflow.
This has two major implications:
- the access_process_vm case loses the total lenght checking, which
wasn't required anyway, given that each call receives two iovecs
for the local and remote side of the operation, and it verifies
the total length on the local side already.
- instead of a single loop there now are two loops over the iovecs.
Given that the iovecs are cache hot this doesn't make a major
difference
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We are missing a deref for the case when we are doing BPF_PROG_BIND_MAP
on a map that's being already held by the program.
There is 'if (ret) bpf_map_put(map)' below which doesn't trigger
because we don't consider this an error.
Let's add missing bpf_map_put() for this specific condition.
Fixes: ef15314aa5 ("bpf: Add BPF_PROG_BIND_MAP syscall")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20201003002544.3601440-1-sdf@google.com
Jakub Kicinski says:
====================
genetlink: support per-command policy dump
The objective of this series is to dump ethtool policies
to be able to tell which flags are supported by the kernel.
Current release adds ETHTOOL_FLAG_STATS for dumping extra
stats, but because of strict checking we need to make sure
that the flag is actually supported before setting it in
a request.
Ethtool policies are per command, and so far only dumping
family policies was supported.
The series adds new set of "light" ops to genl families which
don't have all the callbacks, and won't have the policy.
Most of families are then moved to these ops. This gives
us 4096B in savings on an allyesconfig build (not counting
the growth that would have happened when policy is added):
text data bss dec hex
244415581 227958581 78372980 550747142 20d3bc06
244415581 227962677 78372980 550751238 20d3cc06
Next 5 patches deal the dumping per-op policy.
v3:
The actually patch to dump per-op policy was taken out and
will come in a series from Johannes, to make sure uAPI is
consistent from the start.
For dump-specific policies I think it should be fine to add
a new pair of members to the "full" ops, and not overthink it.
v2:
- remove the stale comment in taskstats
- split patch 8 -> 8, 9
- now the getfamily policy is also in the op
- make cmd u32
v1:
- replace remaining uses of "light" with "small"
- fix dump (ops can't be on the stack there)
- coding changes in patch 4
- new patch 7
- don't echo op in responses - to make dump all easier
Dave - this series will cause a very trivial conflict with
the patch I sent to net. Both sides add some kdoc to struct
genl_ops so we'll need to keep it all. I'm sending this
already because I also need to restructure ethool policies
in time for 5.10 if we want to use it for the stats flag.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for adding a new attribute to CTRL_CMD_GETPOLICY
split the policies for getpolicy and getfamily apart.
This will cause a slight user-visible change in that dumping
the policies will switch from per family to per op, but
supposedly sniffer-type applications (which are the main use
case for policy dumping thus far) should support both, anyway.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Attributes are already parsed based on the policy specified
in the family and ready-to-use in info->attrs. No need to
call genlmsg_parse() again.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 3b0f31f2b8 ("genetlink: make policy common to family")
had to work around removal of policy from ops by parsing in
the pre_doit callback. Now that policy is back in full ops
we can switch again. Set maxattr to actual size of the policies
- both commands set GENL_DONT_VALIDATE_STRICT so out of range
attributes will be silently ignored, anyway.
v2:
- remove stale comment
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add policy to the struct genl_ops structure, this time
with maxattr, so it can be used properly.
Propagate .policy and .maxattr from the family
in genl_get_cmd() if needed, this way the rest of the
code does not have to worry if the policy is per op
or global.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The structure of ctrl_dumppolicy() is clearly split into
init and dumping. Move the init to a .start callback
for clarity, it's a more idiomatic netlink dump code structure.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Whenever netlink dump uses more than 2 cb->args[] entries
code gets hard to read. We're about to add more state to
ctrl_dumppolicy() so create a structure.
Since the structure is typed and clearly named we can remove
the local fam_id variable and use ctx->fam_id directly.
v3:
- rebase onto explicit free fix
v1:
- s/nl_policy_dump/netlink_policy_dump_state/
- forward declare struct netlink_policy_dump_state,
and move from passing unsigned long to actual pointer type
- add build bug on
- u16 fam_id
- s/args/ctx/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bulk of the genetlink users can use smaller ops, move them.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to add maxattr and policy back to genl_ops, to enable
dumping per command policy to user space. This, however, would
cause bloat for all the families with global policies. Introduce
smaller version of ops (half the size of genl_ops). Translate
these smaller ops into a full blown struct before use in the
core.
v1:
- use struct assignment
- put a full copy of the op in struct genl_dumpit_info
- s/light/small/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are holes and oversized members in struct genl_family.
Before: /* size: 104, cachelines: 2, members: 16 */
After: /* size: 88, cachelines: 2, members: 16 */
The command field in struct genlmsghdr is a u8, so no point
in the operation count being 32 bit. Also operation 0 is
usually undefined, so we only need 255 entries.
netnsok and parallel_ops are only ever initialized to true.
We can grow the fields as needed, compiler should warn us
if someone tries to assign larger constants.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes coccicheck warning:
drivers/scsi/lpfc/lpfc_attr.c:5341:5-11: Unneeded variable: "status". Return "- EINVAL" on line 5342
Link: https://lore.kernel.org/r/20200916022859.349089-1-yebin10@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes coccicheck warning:
drivers/scsi/qla4xxx/ql4_init.c:1173:5-11: Unneeded variable: "status". Return "QLA_ERROR" on line 1195
Link: https://lore.kernel.org/r/20200916022749.348923-1-yebin10@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If we fail to issue the iocb in lpfc_gen_req() we need to drop the nodelist
reference.
Link: https://lore.kernel.org/r/20200910084059.138507-1-hare@suse.de
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The be_fill_queue() function can only fail when "eq_vaddress" is NULL and
since it's non-NULL here that means the function call can't fail. But
imagine if it could, then in that situation we would want to store the
"paddr" so that dma memory can be released.
Link: https://lore.kernel.org/r/20200928091300.GD377727@mwanda
Fixes: bfead3b2cb ("[SCSI] be2iscsi: Adding msix and mcc_rings V3")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On fan failure event from MFW, bring down active connections and unload
the firmware context.
Link: https://lore.kernel.org/r/20200924070338.8270-1-mrangankar@marvell.com
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Corrects drivers/target/target_core_user.c:688:6: warning: 'page' may be
used uninitialized.
Link: https://lore.kernel.org/r/20200924001920.43594-1-john.p.donnelly@oracle.com
Fixes: 3c58f73723 ("scsi: target: tcmu: Optimize use of flush_dcache_page")
Cc: Mike Christie <michael.christie@oracle.com>
Acked-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: John Donnelly <john.p.donnelly@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following warnings:
[drivers/scsi/fnic/fnic_debugfs.c:123]: (warning) %u in format string (no. 1)
requires 'unsigned int' but the argument type is 'int'.
[drivers/scsi/fnic/fnic_debugfs.c:125]: (warning) %u in format string (no. 1)
requires 'unsigned int' but the argument type is 'int'.
[drivers/scsi/fnic/fnic_debugfs.c:127]: (warning) %u in format string (no. 1)
requires 'unsigned int' but the argument type is 'int'.
Link: https://lore.kernel.org/r/20200930021919.2832860-2-yebin10@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ret is always zero or error so the assignment is redundant.
Link: https://lore.kernel.org/r/20200925060754.156599-1-jingxiangfeng@huawei.com
Acked-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The fnic drivers assigns an ioreq structure to each command and severs this
assignment once scsi_done() has been called and the command has been
completed.
When traversing commands to terminate outstanding I/O we should not call
scsi_done() on commands which do not have a corresponding ioreq structure;
these commands have either never entered the driver or have already been
completed.
[mkp: fixed unused label warning]
Link: https://lore.kernel.org/r/20200515112647.49260-1-hare@suse.de
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Satish Kharat <satishkh@cisco.com>
Acked-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ioana Ciornei says:
====================
dpaa2-eth: add devlink parser error drop trap support
This patch set adds support in the dpaa2-eth driver for a new group of
devlink drop traps - PARSER_ERROR_DROPS.
The first patch adds a new generic trap group and associated traps,
their definitions in devlink and their corresponding entries in the
Documentation.
Because there might be more devices (besides DPAA2) which do not support
changing the action independently on each trap, a nre devlink callback
is introduced - .trap_group_action_set(). If this callback is populated,
it will take precedence over .trap_action_set() when the user requests
changing the action on all the traps in a group.
The next patches add basic linkage with devlink for the dpaa2-eth driver
and support for the newly added PARSER_ERROR_DROPS. Nothing special
here, just setting up the Rx error queue, interpreting the parse result,
and then reporting any frame received on that queue to devlink.
Changes in v2:
- fix build error in 3/4
Changes in v3:
- removed a commented line in 4/4
- added an extack in 4/4
- fixed up a warning on 32bit in 4/4
- reworded the trap_group_action_set() description in 2/4
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the new group of devlink traps - PARSER_ERROR_DROPS.
This consists of registering the array of parser error drops supported,
controlling their action through the .trap_group_action_set() callback
and reporting an erroneous skb received on the error queue
appropriately.
DPAA2 devices do not support controlling the action of independent
parser error traps, thus the .trap_action_set() callback just returns an
EOPNOTSUPP while .trap_group_action_set() actually notifies the hardware
what it should do with a frame marked as having a header error.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
