- Refine reserved memory nomap handling - Merge some PCI and non-PCI address handling implementations - Simplify of_address.h header ifdefs - Improve printk handling of some 64-bit types - Convert Arm ccree, Zynq FPGA, ZynqMP RTC, Arm VIC, adi,adv7511, TI AM56 PCI, Aspeed I2C, arm,sbsa-gwdt, MTD physmap, virtio-mmio, Arm SCMI, Arm/Amlogic SCPI, TI OMAP mailbox, NXP pcf8563/pcf85263/pcf85363, Mediatek RNG, Arm SCU, Arm TWD timer, Broadcom iProc PWM, Renesas TPU, Tegra20 EMC, MDIO GPIO, renesas,r9a06g032-sysctrl, renesas,emev2-smu, sysc-rmobile, linaro,optee-tz, and TI SCI bindings to DT schema - Convert mux and mux controller bindings to schema. This includes MDIO IIO, and I2C muxes. - Add Arm PL031 RTC binding schema - Add vendor prefixes for StarFive Technology Co. Ltd. and Insignal Ltd - Fix some stale doc references - Remove stale property-units.txt. Superseded by schema in dt-schema repo. - Fixes for 'unevaluatedProperties' handling (enabled with experimental json-schema support) - Drop redundant usage of minItems and maxItems across the tree - Update some examples to use bindings with a schema -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmDfNTsQHHJvYmhAa2Vy bmVsLm9yZwAKCRD6+121jbxhwx/jD/0TG5A5clgwEA/0wKTLUK0OmRhTS4T9AjD2 NIgs+74YztwP1c49u6SXmSCD1wfyHl1dznmvXUn/gD9838gwYjHH4eZgG5weOwOy hQgEhUqZ3AJF24wEDAfkQX7KCh9rxO1Vifx+2ER+DXCc65kBxbwdBSUSgWSkN/fj UHRENdW37ORw4WLXELGYDRegvLktzCbPqwPWUBJy8+9or1/r2ZFN5Or6gG1J7HR5 jGiiKyB5O5E1GBtiCQaFoGl+uQG5/X2aSb7AMYbMnOTP+fr9YiTbcTjKwoMMurJW T56YUse0QZ7yK5umUMV17A2urrOg9Nnk7kj5Sf63UkOwVY5Xjx/TqIwBPZGXUTlK RdSIZXzzdv491pem1sHty6TjX3NFIe81aR9p7CZIigOa9AXj5PMcVHflq3SUDSuQ nCg2qf7E73307w5PNLSbkEFkR/g341pqwvwMmRDb9a68ZBwhylKKVdV0GzAdea8P ez1R0hJMJ/y5DqdC1KXOjLOR6zX+a3daLTPLsPKXeeKMsI/U4BXF3s5aoxBavkzU SLiZynost28oTlVX7K2fl4r7WocyMj4htywqerfeJVry+FVopFVNcwb/zowRSOpd o9xqpSXMXzBDB5eSQR331mOrUU5SxKhISmofH3U+MvF9D2/yNB1qMhMSAN9DBzOl mofZZWSIzg== =MDNZ -----END PGP SIGNATURE----- Merge tag 'devicetree-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Refine reserved memory nomap handling - Merge some PCI and non-PCI address handling implementations - Simplify of_address.h header ifdefs - Improve printk handling of some 64-bit types - Convert adi,adv7511, Arm ccree, Arm SCMI, Arm SCU, Arm TWD timer, Arm VIC, arm,sbsa-gwdt, Arm/Amlogic SCPI, Aspeed I2C, Broadcom iProc PWM, linaro,optee-tz, MDIO GPIO, Mediatek RNG, MTD physmap, NXP pcf8563/pcf85263/pcf85363, Renesas TPU, renesas,emev2-smu, renesas,r9a06g032-sysctrl, sysc-rmobile, Tegra20 EMC, TI AM56 PCI, TI OMAP mailbox, TI SCI bindings, virtio-mmio, Zynq FPGA, and ZynqMP RTC to DT schema - Convert mux and mux controller bindings to schema. This includes MDIO IIO, and I2C muxes. - Add Arm PL031 RTC binding schema - Add vendor prefixes for StarFive Technology Co. Ltd. and Insignal Ltd - Fix some stale doc references - Remove stale property-units.txt. Superseded by schema in dt-schema repo. - Fixes for 'unevaluatedProperties' handling (enabled with experimental json-schema support) - Drop redundant usage of minItems and maxItems across the tree - Update some examples to use bindings with a schema * tag 'devicetree-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (83 commits) dt-bindings: Fix 'unevaluatedProperties' errors in DT graph users dt-bindings: display: renesas,du: Fix 'ports' reference dt-bindings: media: adv7180: Add missing video-interfaces.yaml reference dt-bindings: crypto: ccree: Convert to json-schema dt-bindings: fpga: zynq: convert bindings to YAML dt-bindings: rtc: zynqmp: convert bindings to YAML dt-bindings: interrupt-controller: Convert ARM VIC to json-schema of: of_reserved_mem: mark nomap memory instead of removing of: of_reserved_mem: only call memblock_free for normal reserved memory dt-bindings: Drop redundant minItems/maxItems dt-bindings: spmi: Correct 'reg' schema of: reserved-memory: Add stub for RESERVEDMEM_OF_DECLARE() dt-bindings: clk: vc5: Fix example dt-bindings: timer: renesas,tmu: add r8a779a0 TMU support dt-bindings: drm: bridge: adi,adv7511.txt: convert to yaml dt-bindings: PCI: ti,am65: Convert PCIe host/endpoint mode dt-bindings to YAML of: Remove superfluous casts when printing u64 values of: Fix truncation of memory sizes on 32-bit platforms dt-bindings: rtc: nxp,pcf8563: Absorb pcf85263/pcf85363 bindings dt-bindings: pwm: Use examples with documented/matching schema ...
218 lines
5.5 KiB
YAML
218 lines
5.5 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: "http://devicetree.org/schemas/phy/phy-cadence-torrent.yaml#"
|
|
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
|
|
|
title: Cadence Torrent SD0801 PHY binding
|
|
|
|
description:
|
|
This binding describes the Cadence SD0801 PHY (also known as Torrent PHY)
|
|
hardware included with the Cadence MHDP DisplayPort controller. Torrent
|
|
PHY also supports multilink multiprotocol combinations including protocols
|
|
such as PCIe, USB, SGMII, QSGMII etc.
|
|
|
|
maintainers:
|
|
- Swapnil Jakhade <sjakhade@cadence.com>
|
|
- Yuti Amonkar <yamonkar@cadence.com>
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- cdns,torrent-phy
|
|
- ti,j721e-serdes-10g
|
|
|
|
'#address-cells':
|
|
const: 1
|
|
|
|
'#size-cells':
|
|
const: 0
|
|
|
|
'#clock-cells':
|
|
const: 1
|
|
|
|
clocks:
|
|
minItems: 1
|
|
maxItems: 2
|
|
description:
|
|
PHY reference clock for 1 item. Must contain an entry in clock-names.
|
|
Optional Parent to enable output reference clock.
|
|
|
|
clock-names:
|
|
minItems: 1
|
|
items:
|
|
- const: refclk
|
|
- const: phy_en_refclk
|
|
|
|
assigned-clocks:
|
|
maxItems: 3
|
|
|
|
assigned-clock-parents:
|
|
maxItems: 3
|
|
|
|
reg:
|
|
minItems: 1
|
|
items:
|
|
- description: Offset of the Torrent PHY configuration registers.
|
|
- description: Offset of the DPTX PHY configuration registers.
|
|
|
|
reg-names:
|
|
minItems: 1
|
|
items:
|
|
- const: torrent_phy
|
|
- const: dptx_phy
|
|
|
|
resets:
|
|
minItems: 1
|
|
items:
|
|
- description: Torrent PHY reset.
|
|
- description: Torrent APB reset. This is optional.
|
|
|
|
reset-names:
|
|
minItems: 1
|
|
items:
|
|
- const: torrent_reset
|
|
- const: torrent_apb
|
|
|
|
patternProperties:
|
|
'^phy@[0-3]$':
|
|
type: object
|
|
description:
|
|
Each group of PHY lanes with a single master lane should be represented as a sub-node.
|
|
properties:
|
|
reg:
|
|
description:
|
|
The master lane number. This is the lowest numbered lane in the lane group.
|
|
minimum: 0
|
|
maximum: 3
|
|
|
|
resets:
|
|
minItems: 1
|
|
maxItems: 4
|
|
description:
|
|
Contains list of resets, one per lane, to get all the link lanes out of reset.
|
|
|
|
"#phy-cells":
|
|
const: 0
|
|
|
|
cdns,phy-type:
|
|
description:
|
|
Specifies the type of PHY for which the group of PHY lanes is used.
|
|
Refer include/dt-bindings/phy/phy.h. Constants from the header should be used.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 1
|
|
maximum: 9
|
|
|
|
cdns,num-lanes:
|
|
description:
|
|
Number of lanes.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [1, 2, 3, 4]
|
|
default: 4
|
|
|
|
cdns,ssc-mode:
|
|
description:
|
|
Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC,
|
|
EXTERNAL_SSC or INTERNAL_SSC.
|
|
Refer include/dt-bindings/phy/phy-cadence.h for the constants to be used.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1, 2]
|
|
default: 0
|
|
|
|
cdns,max-bit-rate:
|
|
description:
|
|
Maximum DisplayPort link bit rate to use, in Mbps
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [2160, 2430, 2700, 3240, 4320, 5400, 8100]
|
|
default: 8100
|
|
|
|
required:
|
|
- reg
|
|
- resets
|
|
- "#phy-cells"
|
|
- cdns,phy-type
|
|
- cdns,num-lanes
|
|
|
|
additionalProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- "#address-cells"
|
|
- "#size-cells"
|
|
- clocks
|
|
- clock-names
|
|
- reg
|
|
- reg-names
|
|
- resets
|
|
- reset-names
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/phy/phy.h>
|
|
|
|
bus {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
torrent-phy@f0fb500000 {
|
|
compatible = "cdns,torrent-phy";
|
|
reg = <0xf0 0xfb500000 0x0 0x00100000>,
|
|
<0xf0 0xfb030a00 0x0 0x00000040>;
|
|
reg-names = "torrent_phy", "dptx_phy";
|
|
resets = <&phyrst 0>;
|
|
reset-names = "torrent_reset";
|
|
clocks = <&ref_clk>;
|
|
clock-names = "refclk";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
phy@0 {
|
|
reg = <0>;
|
|
resets = <&phyrst 1>, <&phyrst 2>,
|
|
<&phyrst 3>, <&phyrst 4>;
|
|
#phy-cells = <0>;
|
|
cdns,phy-type = <PHY_TYPE_DP>;
|
|
cdns,num-lanes = <4>;
|
|
cdns,max-bit-rate = <8100>;
|
|
};
|
|
};
|
|
};
|
|
- |
|
|
#include <dt-bindings/phy/phy.h>
|
|
#include <dt-bindings/phy/phy-cadence.h>
|
|
|
|
bus {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
torrent-phy@f0fb500000 {
|
|
compatible = "cdns,torrent-phy";
|
|
reg = <0xf0 0xfb500000 0x0 0x00100000>;
|
|
reg-names = "torrent_phy";
|
|
resets = <&phyrst 0>, <&phyrst 1>;
|
|
reset-names = "torrent_reset", "torrent_apb";
|
|
clocks = <&ref_clk>;
|
|
clock-names = "refclk";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
phy@0 {
|
|
reg = <0>;
|
|
resets = <&phyrst 2>, <&phyrst 3>;
|
|
#phy-cells = <0>;
|
|
cdns,phy-type = <PHY_TYPE_PCIE>;
|
|
cdns,num-lanes = <2>;
|
|
cdns,ssc-mode = <TORRENT_SERDES_NO_SSC>;
|
|
};
|
|
|
|
phy@2 {
|
|
reg = <2>;
|
|
resets = <&phyrst 4>;
|
|
#phy-cells = <0>;
|
|
cdns,phy-type = <PHY_TYPE_SGMII>;
|
|
cdns,num-lanes = <1>;
|
|
cdns,ssc-mode = <TORRENT_SERDES_NO_SSC>;
|
|
};
|
|
};
|
|
};
|
|
...
|