linux-xiaomi-chiron/drivers/input/touchscreen
Linus Walleij c54be0e32e Input: zinitix - handle proper supply names
The supply names of the Zinitix touchscreen were a bit confused, the new
bindings rectifies this.

To deal with old and new devicetrees, first check if we have "vddo" and in
case that exists assume the old supply names. Else go and look for the new
ones.

We cannot just get the regulators since we would get an OK and a dummy
regulator: we need to check explicitly for the old supply name.

Use struct device *dev as a local variable instead of the I2C client since
the device is what we are actually obtaining the resources from.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[Slightly changed the legacy regulator detection]
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20220106072840.36851-4-nikita@trvn.ru
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-01-08 23:27:05 -08:00
..
88pm860x-ts.c Input: remove dev_err() usage after platform_get_irq() 2019-08-14 10:49:01 -07:00
ad7877.c Input: ad7877 - use new structure for SPI transfer delays 2020-12-10 23:39:15 -08:00
ad7879-i2c.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 149 2019-05-30 11:25:18 -07:00
ad7879-spi.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 149 2019-05-30 11:25:18 -07:00
ad7879.c Input: use input_device_enabled() 2020-12-02 22:10:33 -08:00
ad7879.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 149 2019-05-30 11:25:18 -07:00
ads7846.c Input: ads7846 - do not attempt IRQ workaround when deferring probe 2021-10-15 22:09:48 -07:00
ar1021_i2c.c Input: move to use request_irq by IRQF_NO_AUTOEN flag 2021-03-25 15:27:56 -07:00
atmel_mxt_ts.c Input: move to use request_irq by IRQF_NO_AUTOEN flag 2021-03-25 15:27:56 -07:00
auo-pixcir-ts.c Input: use input_device_enabled() 2020-12-02 22:10:33 -08:00
bcm_iproc_tsc.c Input: remove dev_err() usage after platform_get_irq() 2019-08-14 10:49:01 -07:00
bu21013_ts.c Input: bu21013_ts - switch to using standard touchscreen properties 2019-09-02 09:07:38 -07:00
bu21029_ts.c Input: move to use request_irq by IRQF_NO_AUTOEN flag 2021-03-25 15:27:56 -07:00
chipone_icn8318.c Input: use input_device_enabled() 2020-12-02 22:10:33 -08:00
chipone_icn8505.c Input: icn8505 - Switch to firmware_request_platform for retreiving the fw 2020-03-20 14:57:54 +01:00
colibri-vf50-ts.c Input: colibri-vf50-ts - remove unneeded gpio.h header file 2019-10-27 11:14:22 -07:00
cy8ctma140.c Input: add driver for the Cypress CY8CTMA140 touchscreen 2020-05-09 22:26:48 -07:00
cy8ctmg110_ts.c Input: cy8ctmg110_ts - switch to using gpiod API 2021-06-05 20:34:16 -07:00
cyttsp4_core.c Input: cyttsp4 - move 'cyttsp4_tch_abs_string' to the only file that references it 2020-11-08 22:35:48 -08:00
cyttsp4_core.h Input: cyttsp4 - move 'cyttsp4_tch_abs_string' to the only file that references it 2020-11-08 22:35:48 -08:00
cyttsp4_i2c.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
cyttsp4_spi.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
cyttsp_core.c Input: cyttsp - remove public header 2021-06-01 21:13:11 -07:00
cyttsp_core.h Input: cyttsp - remove public header 2021-06-01 21:13:11 -07:00
cyttsp_i2c.c Input: cyttsp - remove public header 2021-06-01 21:13:11 -07:00
cyttsp_i2c_common.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 2019-06-05 17:36:37 +02:00
cyttsp_spi.c Input: cyttsp - remove public header 2021-06-01 21:13:11 -07:00
da9034-ts.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
da9052_tsi.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 2019-05-30 11:26:32 -07:00
dynapro.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
edt-ft5x06.c Input: edt-ft5x06 - added case for EDT EP0110M09 2021-09-05 19:10:11 -07:00
eeti_ts.c Input: use input_device_enabled() 2020-12-02 22:10:33 -08:00
egalax_ts.c Input: egalax_ts - add system wakeup support 2018-09-18 15:28:07 -07:00
egalax_ts_serial.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
ektf2127.c Input: use input_device_enabled() 2020-12-02 22:10:33 -08:00
elants_i2c.c Linux 5.15 2021-12-08 23:43:50 -08:00
elo.c Input: elo - fix an error code in elo_connect() 2021-02-18 14:39:42 -08:00
exc3000.c Input: exc3000 - add type sysfs attribute 2021-03-07 21:56:50 -08:00
fsl-imx25-tcq.c Input: remove dev_err() usage after platform_get_irq() 2019-08-14 10:49:01 -07:00
fujitsu_ts.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
goodix.c Input: goodix - 2 small fixes for pen support 2021-12-12 21:10:20 -08:00
goodix.h Input: goodix - add pen support 2021-12-09 00:13:13 -08:00
goodix_fwupload.c Input: goodix - add support for controllers without flash 2021-09-20 22:00:29 -07:00
gunze.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 2019-05-30 11:26:35 -07:00
hampshire.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
hideep.c Input: hideep - fix the uninitialized use in hideep_nvm_unlock() 2021-06-19 22:36:28 -07:00
hp680_ts_input.c treewide: Add SPDX license identifier for more missed files 2019-05-21 10:50:45 +02:00
htcpen.c isa: Make the remove callback for isa drivers return void 2021-01-26 07:42:27 +01:00
hycon-hy46xx.c Input: add driver for the Hycon HY46XX touchpanel series 2021-04-13 19:08:30 -07:00
ili210x.c Input: ili210x - reduce sample period to 15ms 2021-11-09 22:23:02 -08:00
ilitek_ts_i2c.c Input: Add support for ILITEK Lego Series 2021-04-09 23:23:01 -07:00
imx6ul_tsc.c Input: use input_device_enabled() 2020-12-02 22:10:33 -08:00
inexio.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
ipaq-micro-ts.c Input: use input_device_enabled() 2020-12-02 22:10:33 -08:00
iqs5xx.c Input: iqs5xx - make reset GPIO optional 2021-03-25 11:14:10 -07:00
jornada720_ts.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
Kconfig Input: ili210x - add ili251x firmware update support 2021-10-16 22:29:35 -07:00
lpc32xx_ts.c Input: lpc32xx_ts - convert to use BIT() 2021-03-20 19:48:37 -07:00
mainstone-wm97xx.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 2019-05-30 11:26:32 -07:00
Makefile Input: goodix - add support for controllers without flash 2021-09-20 22:00:29 -07:00
max11801_ts.c Input: Use fallthrough pseudo-keyword 2020-07-07 11:25:54 -07:00
mc13783_ts.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
mcs5000_ts.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 2019-05-30 11:26:32 -07:00
melfas_mip4.c Input: move to use request_irq by IRQF_NO_AUTOEN flag 2021-03-25 15:27:56 -07:00
migor_ts.c Input: migor_ts - convert to SPDX identifiers 2018-11-12 11:52:05 -08:00
mk712.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
mms114.c Input: mms114 - support MMS134S 2021-09-06 23:33:26 -07:00
msg2638.c Input: add MStar MSG2638 touchscreen driver 2021-04-09 23:22:38 -07:00
mtouch.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
mxs-lradc-ts.c Input: mxs-lradc-ts - use devm_platform_ioremap_resource() 2019-07-24 12:48:47 +03:00
pcap_ts.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
penmount.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
pixcir_i2c_ts.c Input: use input_device_enabled() 2020-12-02 22:10:33 -08:00
raspberrypi-ts.c input: raspberrypi-ts: Release firmware handle when not needed 2021-03-22 17:59:51 +01:00
raydium_i2c_ts.c Input: raydium_i2c_ts - make use of the helper function devm_add_action_or_reset() 2021-09-22 21:56:49 -07:00
resistive-adc-touch.c Input: resistive-adc-touch - fix division by zero error on z1 == 0 2021-10-15 22:11:03 -07:00
rohm_bu21023.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282 2019-06-05 17:36:37 +02:00
s3c2410_ts.c ARM: s3c: adc: move header to linux/soc/samsung 2020-08-19 21:44:11 +02:00
s6sy761.c Input: s6sy761 - fix coordinate read bit shift 2021-03-07 15:14:25 -08:00
silead.c Input: silead - add pen support 2021-12-12 21:10:23 -08:00
sis_i2c.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282 2019-06-05 17:36:37 +02:00
st1232.c Input: st1232 - prefer asynchronous probing 2021-10-11 18:32:56 -07:00
stmfts.c Input: move to use request_irq by IRQF_NO_AUTOEN flag 2021-03-25 15:27:56 -07:00
stmpe-ts.c Input: stmpe-ts - add description for 'prop' struct member 2021-01-19 19:03:18 -08:00
sun4i-ts.c Input: sun4i-ts - add a check for devm_thermal_zone_of_sensor_register 2020-01-10 14:42:52 -08:00
sur40.c Input: sur40 - fix an error code in sur40_probe() 2021-02-16 20:39:53 -08:00
surface3_spi.c Input: surface3_spi - remove set but unused variable 'timestamp' 2021-01-19 19:03:16 -08:00
sx8654.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
ti_am335x_tsc.c Input: ti_am335x_tsc - lower the X and Y sampling time 2021-12-19 23:54:32 -08:00
touchit213.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
touchright.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
touchwin.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
tps6507x-ts.c Input: tsc6507x-ts - switch to using polled mode of input devices 2019-10-29 17:13:41 -07:00
ts4800-ts.c Input: ts4800-ts - switch to using polled mode of input devices 2019-10-29 17:13:40 -07:00
tsc40.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 315 2019-06-05 17:37:05 +02:00
tsc200x-core.c Input: tsc200x - make tsc200x_remove() return void 2021-10-12 19:48:54 -07:00
tsc200x-core.h Input: tsc200x - make tsc200x_remove() return void 2021-10-12 19:48:54 -07:00
tsc2004.c Input: tsc200x - make tsc200x_remove() return void 2021-10-12 19:48:54 -07:00
tsc2005.c Input: tsc200x - make tsc200x_remove() return void 2021-10-12 19:48:54 -07:00
tsc2007.h Input: tsc2007 - convert to GPIO descriptors 2021-03-15 17:12:02 -07:00
tsc2007_core.c Input: tsc2007 - make use of device properties 2021-03-15 17:12:04 -07:00
tsc2007_iio.c iio: remove explicit IIO device parent assignment 2020-06-14 11:49:59 +01:00
ucb1400_ts.c Input: ucb1400_ts - remove redundant variable penup 2021-12-19 23:55:25 -08:00
usbtouchscreen.c Input: usbtouchscreen - fix control-request directions 2021-05-24 20:56:11 -07:00
wacom_i2c.c Input: wacom_i2c - clean up the query device fields 2021-11-29 00:15:39 -08:00
wacom_w8001.c Input: wacom_w8001 - allocate additional space for 'phys' 2019-08-20 12:03:46 -07:00
wdt87xx_i2c.c Input: wdt87xx_i2c - replace mdelay() with msleep() in wdt87xx_resume() 2018-07-27 11:59:05 -07:00
wm97xx-core.c Input: use input_device_enabled() 2020-12-02 22:10:33 -08:00
wm831x-ts.c Input: move to use request_irq by IRQF_NO_AUTOEN flag 2021-03-25 15:27:56 -07:00
wm9705.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 2019-05-30 11:26:32 -07:00
wm9712.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 2019-05-30 11:26:32 -07:00
wm9713.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 2019-05-30 11:26:32 -07:00
zet6223.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 2019-05-30 11:26:37 -07:00
zforce_ts.c Input: use input_device_enabled() 2020-12-02 22:10:33 -08:00
zinitix.c Input: zinitix - handle proper supply names 2022-01-08 23:27:05 -08:00
zylonite-wm97xx.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 2019-05-30 11:26:32 -07:00