linux-xiaomi-chiron/drivers/usb/serial
Slark Xiao 158f7585bf USB: serial: option: add support for Cinterion MV31 with new baseline
Adding support for Cinterion device MV31 with Qualcomm
new baseline. Use different PIDs to separate it from
previous base line products.
All interfaces settings keep same as previous.

Below is test evidence:
T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=00b8 Rev=04.14
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00B8 USB Mobile Broadband
S:  SerialNumber=90418e79
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=00b9 Rev=04.14
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00B9 USB Mobile Broadband
S:  SerialNumber=90418e79
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

For PID 00b8, interface 3 is GNSS port which don't use serial driver.

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20220601034740.5438-1-slark_xiao@163.com
[ johan: rename defines using a "2" infix ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
2022-06-09 14:32:42 +02:00
..
aircable.c USB: serial: drop redundant transfer-buffer casts 2020-07-09 09:20:17 +02:00
ark3116.c tty: remove CMSPAR ifdefs 2022-05-19 18:26:16 +02:00
belkin_sa.c tty: make use of tty_get_{char,frame}_size 2021-06-15 14:03:27 +02:00
belkin_sa.h USB: serial: Use the correct style for SPDX License Identifier 2020-04-22 09:26:47 +02:00
bus.c bus: Make remove callback return void 2021-07-21 11:53:42 +02:00
ch341.c Revert "USB: serial: ch341: add new Product ID for CH341A" 2022-02-21 09:58:14 +01:00
console.c USB: serial: console: add support for flow control 2020-07-02 10:38:45 +02:00
cp210x.c USB: serial: cp210x: add PIDs for Kamstrup USB Meter Reader 2022-04-20 09:19:42 +02:00
cyberjack.c USB: serial: make usb_serial_driver::write_room return uint 2021-05-19 10:56:40 +02:00
cypress_m8.c USB: serial: replace symbolic permissions by octal permissions 2021-08-26 09:38:27 +02:00
cypress_m8.h USB: serial: cypress_m8: enable Simply Automated UPB PIM 2020-06-23 09:56:17 +02:00
digi_acceleport.c USB: serial: drop irq-flags initialisations 2021-05-21 15:46:25 +02:00
empeg.c docs: usb: rename files to .rst and add them to drivers-api 2019-06-20 14:28:36 +02:00
ezusb_convert.pl License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
f81232.c USB: serial: make use of UART_LCR_WLEN() + tty_get_char_size() 2022-02-28 21:49:06 +01:00
f81534.c USB: serial: make use of UART_LCR_WLEN() + tty_get_char_size() 2022-02-28 21:49:06 +01:00
ftdi_sio.c USB: serial: ftdi_sio: clean up printk format specifier 2022-05-05 14:09:31 +02:00
ftdi_sio.h USB: Fix up terminology 2020-07-01 14:04:04 +02:00
ftdi_sio_ids.h USB: serial: ftdi_sio: add support for Brainboxes US-159/235/320 2022-02-01 11:53:43 +01:00
garmin_gps.c USB: serial: replace symbolic permissions by octal permissions 2021-08-26 09:38:27 +02:00
generic.c USB: serial: make usb_serial_driver::chars_in_buffer return uint 2021-05-19 10:56:41 +02:00
io_16654.h USB: serial: Use the correct style for SPDX License Identifier 2020-04-22 09:26:47 +02:00
io_edgeport.c USB: serial: io_edgeport: drop unused descriptor helper 2021-07-30 17:15:39 +02:00
io_edgeport.h USB: serial: io_edgeport: drop unused definitions 2021-04-08 09:50:04 +02:00
io_ionsp.h USB: serial: Use the correct style for SPDX License Identifier 2020-04-22 09:26:47 +02:00
io_ti.c USB: serial: io_ti: add Agilent E5805A support 2022-06-09 14:13:28 +02:00
io_ti.h USB: serial: io_ti: drop unnecessary packed attributes 2021-04-13 18:23:34 +02:00
io_usbvend.h USB: serial: io_ti: add Agilent E5805A support 2022-06-09 14:13:28 +02:00
ipaq.c USB: serial: replace symbolic permissions by octal permissions 2021-08-26 09:38:27 +02:00
ipw.c USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
ir-usb.c USB: serial: make usb_serial_driver::write_room return uint 2021-05-19 10:56:40 +02:00
iuu_phoenix.c USB: serial: replace symbolic permissions by octal permissions 2021-08-26 09:38:27 +02:00
iuu_phoenix.h USB: serial: Use the correct style for SPDX License Identifier 2020-04-22 09:26:47 +02:00
Kconfig USB: serial: simple: add Nokia phone driver 2022-03-03 09:27:36 +01:00
keyspan.c USB: serial: keyspan: fix memleak on probe errors 2021-10-27 15:18:59 +02:00
keyspan_pda.c USB: serial: keyspan_pda: use usb_control_msg_recv() 2021-09-21 14:23:23 +02:00
keyspan_usa26msg.h USB: serial: keyspan_usa: add proper SPDX lines for .h files 2019-01-18 11:09:32 +01:00
keyspan_usa28msg.h USB: serial: keyspan_usa: add proper SPDX lines for .h files 2019-01-18 11:09:32 +01:00
keyspan_usa49msg.h USB: serial: keyspan_usa: add proper SPDX lines for .h files 2019-01-18 11:09:32 +01:00
keyspan_usa67msg.h USB: serial: keyspan_usa: add proper SPDX lines for .h files 2019-01-18 11:09:32 +01:00
keyspan_usa90msg.h USB: serial: keyspan_usa: add proper SPDX lines for .h files 2019-01-18 11:09:32 +01:00
kl5kusb105.c USB: serial: kl5kusb105: drop line-status helper 2021-09-22 09:33:17 +02:00
kl5kusb105.h USB: serial: kl5kusb105: remove KLSI device id 2018-07-11 10:11:29 +02:00
kobil_sct.c USB: serial: make usb_serial_driver::write_room return uint 2021-05-19 10:56:40 +02:00
kobil_sct.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
Makefile USB: serial: add MaxLinear/Exar USB to Serial driver 2021-01-21 10:49:37 +01:00
Makefile-keyspan_pda_fw USB: add SPDX identifiers to all remaining Makefiles 2017-11-07 15:53:48 +01:00
mct_u232.c USB: serial: make remove callback return void 2021-02-09 13:13:58 +01:00
mct_u232.h USB: serial: Use the correct style for SPDX License Identifier 2020-04-22 09:26:47 +02:00
metro-usb.c USB: serial: drop irq-flags initialisations 2021-05-21 15:46:25 +02:00
mos7720.c USB: serial: make use of UART_LCR_WLEN() + tty_get_char_size() 2022-02-28 21:49:06 +01:00
mos7840.c USB: serial: mos7840: remove duplicated 0xac24 device ID 2021-09-20 11:19:55 +02:00
mxuport.c USB: serial: mxuport: drop short control-transfer check 2021-01-18 14:26:14 +01:00
navman.c USB: serial: fix module-license macros 2017-11-04 11:58:00 +01:00
omninet.c USB: serial: omninet: update driver description 2021-05-25 08:59:17 +02:00
opticon.c USB: serial: make usb_serial_driver::chars_in_buffer return uint 2021-05-19 10:56:41 +02:00
option.c USB: serial: option: add support for Cinterion MV31 with new baseline 2022-06-09 14:32:42 +02:00
oti6858.c USB: serial: make usb_serial_driver::chars_in_buffer return uint 2021-05-19 10:56:41 +02:00
oti6858.h USB: serial: Use the correct style for SPDX License Identifier 2020-04-22 09:26:47 +02:00
pl2303.c USB / Thunderbolt changes for 5.19-rc1 2022-06-03 11:17:49 -07:00
pl2303.h USB: serial: pl2303: add device id for HP LM930 Display 2022-05-05 13:31:03 +02:00
qcaux.c USB: serial: fix module-license macros 2017-11-04 11:58:00 +01:00
qcserial.c USB: serial: qcserial: add support for Sierra Wireless EM7590 2022-05-05 15:15:15 +02:00
quatech2.c USB: serial: make use of UART_LCR_WLEN() + tty_get_char_size() 2022-02-28 21:49:06 +01:00
safe_serial.c USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
sierra.c USB: serial: replace symbolic permissions by octal permissions 2021-08-26 09:38:27 +02:00
spcp8x5.c USB: serial: make remove callback return void 2021-02-09 13:13:58 +01:00
ssu100.c USB: serial: make use of UART_LCR_WLEN() + tty_get_char_size() 2022-02-28 21:49:06 +01:00
symbolserial.c USB: serial: make remove callback return void 2021-02-09 13:13:58 +01:00
ti_usb_3410_5052.c USB-serial updates for 5.14-rc1 2021-06-24 12:54:28 +02:00
upd78f0730.c USB: serial: do not use tty class device for debugging 2021-04-09 17:55:21 +02:00
usb-serial-simple.c USB: serial: simple: add Nokia phone driver 2022-03-03 09:27:36 +01:00
usb-serial.c USB: serial: allow hung up ports to be suspended 2021-09-20 11:49:34 +02:00
usb-wwan.h USB: serial: make usb_serial_driver::chars_in_buffer return uint 2021-05-19 10:56:41 +02:00
usb_debug.c USB: serial: usb_debug: add new USB device id 2017-11-28 09:54:11 +01:00
usb_wwan.c USB: serial: usb_wwan: remove redundant assignment to variable i 2022-03-08 18:51:02 +01:00
visor.c docs: usb: rename files to .rst and add them to drivers-api 2019-06-20 14:28:36 +02:00
visor.h USB: serial: Use the correct style for SPDX License Identifier 2020-04-22 09:26:47 +02:00
whiteheat.c tty: remove CMSPAR ifdefs 2022-05-19 18:26:16 +02:00
whiteheat.h USB: serial: Use the correct style for SPDX License Identifier 2020-04-22 09:26:47 +02:00
wishbone-serial.c USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
xr_serial.c USB: serial: xr: add copyright notice 2021-04-13 18:36:39 +02:00
xsens_mt.c USB: serial: fix module-license macros 2017-11-04 11:58:00 +01:00