Linux mainline fork with MSM8998 patches | https://mainline.space | Currently supported devices:
OnePlus 5/5T, Xiaomi Mi 6, F(x)tec Pro¹ (2019 QX1000 model) & Sony Xperia XZ Premium (UNTESTED!)
6365504d42
Currently, a SPI transfer that is not multiple of the highest supported word width (e.g. 4 bytes) will be transmitted as follows (assume a 30-byte buffer transmitted through a 32-bit wide FIFO that is 32 bytes deep): - First 28 bytes are sent as 7 words of 32 bits each - Last 2 bytes are sent as 1 word of 16 bits size But if the dspi_setup_accel function had decided to use a lower oper_bits_per_word value (16 instead of 32), there would have been enough space in the TX FIFO to fit the entire buffer in one go (15 words of 16 bits each). What we're actually trying to avoid is mixing word sizes within the same run with the TX FIFO, since there is an erratum surrounding this, and invalid data might get transmitted. So this patch adds special cases for when the remaining length of the buffer can be sent in one go as 8-bit or 16-bit words, otherwise it falls back to the standard logic of sending as many bytes as possible at the highest oper_bits_per_word value possible. The benefit is that there will be one less CMDFQ/EOQ interrupt to service when the entire buffer is transmitted during a single go, and that will improve the overall latency of the transfer. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20200304220044.11193-11-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|---|---|---|
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| Documentation | ||
| drivers | ||
| fs | ||
| include | ||
| init | ||
| ipc | ||
| kernel | ||
| lib | ||
| LICENSES | ||
| mm | ||
| net | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .clang-format | ||
| .cocciconfig | ||
| .get_maintainer.ignore | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| COPYING | ||
| CREDITS | ||
| Kbuild | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.