Linux mainline fork with MSM8998 patches | https://mainline.space | Currently supported devices: OnePlus 5/5T, Xiaomi Mi 6, F(x)tec Pro¹ (2019 QX1000 model) & Sony Xperia XZ Premium (UNTESTED!)
Find a file
Greg Kroah-Hartman 46ee6bcac9 MHI changes for v5.19
MHI Host
 --------
 
 Support for new modems:
 
  - Foxconn Cinterion MV32-WA/MV32-WB based on SDX62/SDX65
  - Telit FN980 v1 based on SDX55
  - Telit FN990 based on SDX65
  - Foxconn T99W373/T99W368 based on SDX62/SDX65
 
 Core changes:
 
  - During the recycle of event ring elements, compute the ctxt_wp based on the
    local cached value instead of reading from shared memory. This is to prevent
    the possible corruption of the ctxt_wp as some of the endpoint devices could
    modify the value in shared memory.
 
  - Add sysfs support for resetting the endpoint based on the MHI spec. The MHI
    spec allows the host to hard reset the device in the case of an unrecoverable
    error and all other reset mechanisms have failed.
 
  - During MHI shutdown, wait for the endpoint device to enter the ready state
    post reset before proceeding. This is to avoid a possible race where host
    would remove the interrupt handler and device will send ready state
    interrupt, resulting in IOMMU fault.
 
  - Bail out updating the MHI register if the read has failed during
    read/modify/write.
 
  - Use mhi_write_reg() instead of mhi_write_reg_field() for writing the whole
    register fields in mhi_init_mmio().
 
 MAINTAINERS change:
 
  - Since Qualcomm has moved the email domain for its employess from codeaurora
    domain to quicinc, update the same for Hemant.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAmJ6AVoACgkQVZ8R5v6R
 zvW6mAf+J9D7EWR4W8YTJwN3Pdmu0tkeYQXg3ThOrDFLnljBOle0j3wOdHdMRR5t
 vzn66NfPJIJkugff0diasE07qRZk3ZV7xw+1IZMnHVNCTj4lOyO12jcz/WVIybjl
 6klnm/YEXdmtK5Owt01yNIA1GZYRdfmZw2E2hR6T05Pe/ov2wff/CJ6UcHFrb3Es
 0AdxQ/kpMhQvOzv53wB6ZYL611mMJMrDtcGb5pOH0LWJYN8nbhvh5JfULKBuyWCb
 NsZschX0veYA82OfxhejOiarO6/qKi6cdIfaqzbx26WxfGV2A4Iiqj5UzhTX3sWO
 zl0HyVPKtZIWOm3WvygvXR/1tvdMgg==
 =6jsl
 -----END PGP SIGNATURE-----

Merge tag 'mhi-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-work-next

Manivannan writes:

MHI changes for v5.19

MHI Host
--------

Support for new modems:

 - Foxconn Cinterion MV32-WA/MV32-WB based on SDX62/SDX65
 - Telit FN980 v1 based on SDX55
 - Telit FN990 based on SDX65
 - Foxconn T99W373/T99W368 based on SDX62/SDX65

Core changes:

 - During the recycle of event ring elements, compute the ctxt_wp based on the
   local cached value instead of reading from shared memory. This is to prevent
   the possible corruption of the ctxt_wp as some of the endpoint devices could
   modify the value in shared memory.

 - Add sysfs support for resetting the endpoint based on the MHI spec. The MHI
   spec allows the host to hard reset the device in the case of an unrecoverable
   error and all other reset mechanisms have failed.

 - During MHI shutdown, wait for the endpoint device to enter the ready state
   post reset before proceeding. This is to avoid a possible race where host
   would remove the interrupt handler and device will send ready state
   interrupt, resulting in IOMMU fault.

 - Bail out updating the MHI register if the read has failed during
   read/modify/write.

 - Use mhi_write_reg() instead of mhi_write_reg_field() for writing the whole
   register fields in mhi_init_mmio().

MAINTAINERS change:

 - Since Qualcomm has moved the email domain for its employess from codeaurora
   domain to quicinc, update the same for Hemant.

* tag 'mhi-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi: (29 commits)
  bus: mhi: host: Add support for Foxconn T99W373 and T99W368
  bus: mhi: host: pci_generic: add Telit FN990
  bus: mhi: host: pci_generic: add Telit FN980 v1 hardware revision
  bus: mhi: host: Add support for Cinterion MV32-WA/MV32-WB
  bus: mhi: host: Optimize and update MMIO register write method
  bus: mhi: host: Bail on writing register fields if read fails
  bus: mhi: host: Wait for ready state after reset
  bus: mhi: host: Add soc_reset sysfs
  bus: mhi: host: pci_generic: Sort mhi_pci_id_table based on the PID
  bus: mhi: host: Use cached values for calculating the shared write pointer
  MAINTAINERS: Update Hemant's email id
  bus: mhi: ep: Add uevent support for module autoloading
  bus: mhi: ep: Add support for suspending and resuming channels
  bus: mhi: ep: Add support for queueing SKBs to the host
  bus: mhi: ep: Add support for processing channel rings
  bus: mhi: ep: Add support for reading from the host
  bus: mhi: ep: Add support for processing command rings
  bus: mhi: ep: Add support for handling SYS_ERR condition
  bus: mhi: ep: Add support for handling MHI_RESET
  bus: mhi: ep: Add support for powering down the MHI endpoint stack
  ...
2022-05-19 16:55:13 +02:00
arch ARM: 2022-05-01 11:49:32 -07:00
block bfq: Fix warning in bfqq_request_over_limit() 2022-04-29 06:45:37 -06:00
certs Kbuild updates for v5.18 2022-03-31 11:59:03 -07:00
crypto for-5.18/64bit-pi-2022-03-25 2022-03-26 12:01:35 -07:00
Documentation MHI changes for v5.19 2022-05-19 16:55:13 +02:00
drivers MHI changes for v5.19 2022-05-19 16:55:13 +02:00
fs Driver core fixes for 5.18-rc5 2022-04-30 10:24:21 -07:00
include First set of IIO new device support, features and cleanup for 5.19 2022-05-19 16:53:08 +02:00
init Kbuild updates for v5.18 2022-03-31 11:59:03 -07:00
ipc fs: allocate inode by using alloc_inode_sb() 2022-03-22 15:57:03 -07:00
kernel Networking fixes for 5.18-rc5, including fixes from bluetooth, bpf 2022-04-28 12:34:50 -07:00
lib - A fix to disable PCI/MSI[-X] masking for XEN_HVM guests as that is 2022-05-01 10:03:36 -07:00
LICENSES LICENSES/LGPL-2.1: Add LGPL-2.1-or-later as valid identifiers 2021-12-16 14:33:10 +01:00
mm kasan: prevent cpu_quarantine corruption when CPU offline and cache shrink occur at same time 2022-04-27 13:28:48 -07:00
net A fix for a NULL dereference that turns out to be easily triggerable 2022-04-29 14:37:35 -07:00
samples dma-mapping updates for Linux 5.18 2022-03-29 08:50:14 -07:00
scripts Linux 5.18-rc5 2022-05-02 13:49:24 +02:00
security hardening updates for v5.18-rc1-fix1 2022-03-31 11:43:01 -07:00
sound ALSA: hda/realtek: Add quirk for Clevo NP70PNP 2022-04-21 21:23:47 +02:00
tools binderfs: add extended_error feature entry 2022-05-09 15:43:24 +02:00
usr Kbuild updates for v5.18 2022-03-31 11:59:03 -07:00
virt Merge branch 'kvm-fixes-for-5.18-rc5' into HEAD 2022-04-29 12:39:34 -04:00
.clang-format genirq/msi: Make interrupt allocation less convoluted 2021-12-16 22:22:20 +01:00
.cocciconfig scripts: add Linux .cocciconfig for coccinelle 2016-07-22 12:13:39 +02:00
.get_maintainer.ignore Opt out of scripts/get_maintainer.pl 2019-05-16 10:53:40 -07:00
.gitattributes .gitattributes: use 'dts' diff driver for dts files 2019-12-04 19:44:11 -08:00
.gitignore .gitignore: ignore only top-level modules.builtin 2021-05-02 00:43:35 +09:00
.mailmap mailmap: update Vasily Averin's email address 2022-04-08 14:20:36 -10:00
COPYING COPYING: state that all contributions really are covered by this file 2020-02-10 13:32:20 -08:00
CREDITS MAINTAINERS: replace a Microchip AT91 maintainer 2022-02-09 11:30:01 +01:00
Kbuild kbuild: rename hostprogs-y/always to hostprogs/always-y 2020-02-04 01:53:07 +09:00
Kconfig kbuild: ensure full rebuild when the compiler is updated 2020-05-12 13:28:33 +09:00
MAINTAINERS MHI changes for v5.19 2022-05-19 16:55:13 +02:00
Makefile Linux 5.18-rc5 2022-05-01 13:57:58 -07:00
README Drop all 00-INDEX files from Documentation/ 2018-09-09 15:08:58 -06:00

Linux kernel
============

There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.

In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``.  The formatted documentation can also be read online at:

    https://www.kernel.org/doc/html/latest/

There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.

Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.