3179d37ee1
This patch adds code to generate entry & exit code for various low power
states available on systems based around the MIPS Coherent Processing
System architecture (ie. those with a Coherence Manager, Global
Interrupt Controller & for >=CM2 a Cluster Power Controller). States
supported are:
- Non-coherent wait. This state first leaves the coherent domain and
then executes a regular MIPS wait instruction. Power savings are
found from the elimination of coherency interventions between the
core and any other coherent requestors in the system.
- Clock gated. This state leaves the coherent domain and then gates
the clock input to the core. This removes all dynamic power from the
core but leaves the core at the mercy of another to restart its
clock. Register state is preserved, but the core can not service
interrupts whilst its clock is gated.
- Power gated. This deepest state removes all power input to the core.
All register state is lost and the core will restart execution from
its BEV when another core powers it back up. Because register state
is lost this state requires cooperation with the CONFIG_MIPS_CPS SMP
implementation in order for the core to exit the state successfully.
The code will detect which states are available on the current system
during boot & generate the entry/exit code for those states. This will
be used by cpuidle & hotplug implementations.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
131 lines
4.4 KiB
Makefile
131 lines
4.4 KiB
Makefile
#
|
|
# Makefile for the Linux/MIPS kernel.
|
|
#
|
|
|
|
extra-y := head.o vmlinux.lds
|
|
|
|
obj-y += cpu-probe.o branch.o entry.o genex.o idle.o irq.o process.o \
|
|
prom.o ptrace.o reset.o setup.o signal.o syscall.o \
|
|
time.o topology.o traps.o unaligned.o watch.o vdso.o
|
|
|
|
ifdef CONFIG_FUNCTION_TRACER
|
|
CFLAGS_REMOVE_ftrace.o = -pg
|
|
CFLAGS_REMOVE_early_printk.o = -pg
|
|
CFLAGS_REMOVE_perf_event.o = -pg
|
|
CFLAGS_REMOVE_perf_event_mipsxx.o = -pg
|
|
endif
|
|
|
|
obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o
|
|
obj-$(CONFIG_CEVT_R4K) += cevt-r4k.o
|
|
obj-$(CONFIG_MIPS_MT_SMTC) += cevt-smtc.o
|
|
obj-$(CONFIG_CEVT_DS1287) += cevt-ds1287.o
|
|
obj-$(CONFIG_CEVT_GIC) += cevt-gic.o
|
|
obj-$(CONFIG_CEVT_GT641XX) += cevt-gt641xx.o
|
|
obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o
|
|
obj-$(CONFIG_CEVT_TXX9) += cevt-txx9.o
|
|
obj-$(CONFIG_CSRC_BCM1480) += csrc-bcm1480.o
|
|
obj-$(CONFIG_CSRC_GIC) += csrc-gic.o
|
|
obj-$(CONFIG_CSRC_IOASIC) += csrc-ioasic.o
|
|
obj-$(CONFIG_CSRC_R4K) += csrc-r4k.o
|
|
obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o
|
|
obj-$(CONFIG_SYNC_R4K) += sync-r4k.o
|
|
|
|
obj-$(CONFIG_DEBUG_FS) += segment.o
|
|
obj-$(CONFIG_STACKTRACE) += stacktrace.o
|
|
obj-$(CONFIG_MODULES) += mips_ksyms.o module.o
|
|
obj-$(CONFIG_MODULES_USE_ELF_RELA) += module-rela.o
|
|
|
|
obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.o
|
|
obj-$(CONFIG_FUNCTION_TRACER) += mcount.o ftrace.o
|
|
|
|
obj-$(CONFIG_CPU_R4K_FPU) += r4k_fpu.o r4k_switch.o
|
|
obj-$(CONFIG_CPU_R3000) += r2300_fpu.o r2300_switch.o
|
|
obj-$(CONFIG_CPU_R6000) += r6000_fpu.o r4k_switch.o
|
|
obj-$(CONFIG_CPU_TX39XX) += r2300_fpu.o r2300_switch.o
|
|
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += octeon_switch.o
|
|
|
|
obj-$(CONFIG_SMP) += smp.o
|
|
obj-$(CONFIG_SMP_UP) += smp-up.o
|
|
obj-$(CONFIG_CPU_BMIPS) += smp-bmips.o bmips_vec.o
|
|
|
|
obj-$(CONFIG_MIPS_MT) += mips-mt.o
|
|
obj-$(CONFIG_MIPS_MT_FPAFF) += mips-mt-fpaff.o
|
|
obj-$(CONFIG_MIPS_MT_SMTC) += smtc.o smtc-asm.o smtc-proc.o
|
|
obj-$(CONFIG_MIPS_MT_SMP) += smp-mt.o
|
|
obj-$(CONFIG_MIPS_CMP) += smp-cmp.o
|
|
obj-$(CONFIG_MIPS_CPS) += smp-cps.o cps-vec.o
|
|
obj-$(CONFIG_MIPS_GIC_IPI) += smp-gic.o
|
|
obj-$(CONFIG_CPU_MIPSR2) += spram.o
|
|
|
|
obj-$(CONFIG_MIPS_VPE_LOADER) += vpe.o
|
|
obj-$(CONFIG_MIPS_VPE_LOADER_CMP) += vpe-cmp.o
|
|
obj-$(CONFIG_MIPS_VPE_LOADER_MT) += vpe-mt.o
|
|
obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o
|
|
obj-$(CONFIG_MIPS_VPE_APSP_API_CMP) += rtlx-cmp.o
|
|
obj-$(CONFIG_MIPS_VPE_APSP_API_MT) += rtlx-mt.o
|
|
|
|
obj-$(CONFIG_I8259) += i8259.o
|
|
obj-$(CONFIG_IRQ_CPU) += irq_cpu.o
|
|
obj-$(CONFIG_IRQ_CPU_RM7K) += irq-rm7000.o
|
|
obj-$(CONFIG_MIPS_MSC) += irq-msc01.o
|
|
obj-$(CONFIG_IRQ_TXX9) += irq_txx9.o
|
|
obj-$(CONFIG_IRQ_GT641XX) += irq-gt641xx.o
|
|
obj-$(CONFIG_IRQ_GIC) += irq-gic.o
|
|
|
|
obj-$(CONFIG_KPROBES) += kprobes.o
|
|
obj-$(CONFIG_32BIT) += scall32-o32.o
|
|
obj-$(CONFIG_64BIT) += scall64-64.o
|
|
obj-$(CONFIG_MIPS32_COMPAT) += linux32.o ptrace32.o signal32.o
|
|
obj-$(CONFIG_MIPS32_N32) += binfmt_elfn32.o scall64-n32.o signal_n32.o
|
|
obj-$(CONFIG_MIPS32_O32) += binfmt_elfo32.o scall64-o32.o
|
|
|
|
obj-$(CONFIG_KGDB) += kgdb.o
|
|
obj-$(CONFIG_PROC_FS) += proc.o
|
|
|
|
obj-$(CONFIG_64BIT) += cpu-bugs64.o
|
|
|
|
obj-$(CONFIG_I8253) += i8253.o
|
|
|
|
obj-$(CONFIG_GPIO_TXX9) += gpio_txx9.o
|
|
|
|
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o
|
|
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
|
|
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
|
|
obj-$(CONFIG_EARLY_PRINTK_8250) += early_printk_8250.o
|
|
obj-$(CONFIG_SPINLOCK_TEST) += spinlock_test.o
|
|
obj-$(CONFIG_MIPS_MACHINE) += mips_machine.o
|
|
|
|
CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -x c /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
|
|
|
|
obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT) += 8250-platform.o
|
|
|
|
obj-$(CONFIG_PERF_EVENTS) += perf_event.o
|
|
obj-$(CONFIG_HW_PERF_EVENTS) += perf_event_mipsxx.o
|
|
|
|
obj-$(CONFIG_JUMP_LABEL) += jump_label.o
|
|
|
|
obj-$(CONFIG_MIPS_CM) += mips-cm.o
|
|
obj-$(CONFIG_MIPS_CPC) += mips-cpc.o
|
|
|
|
obj-$(CONFIG_CPU_PM) += pm.o
|
|
obj-$(CONFIG_MIPS_CPS_PM) += pm-cps.o
|
|
|
|
#
|
|
# DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is not
|
|
# safe to unconditionnaly use the assembler -mdsp / -mdspr2 switches
|
|
# here because the compiler may use DSP ASE instructions (such as lwx) in
|
|
# code paths where we cannot check that the CPU we are running on supports it.
|
|
# Proper abstraction using HAVE_AS_DSP and macros is done in
|
|
# arch/mips/include/asm/mipsregs.h.
|
|
#
|
|
ifeq ($(CONFIG_CPU_MIPSR2), y)
|
|
CFLAGS_DSP = -DHAVE_AS_DSP
|
|
|
|
CFLAGS_signal.o = $(CFLAGS_DSP)
|
|
CFLAGS_signal32.o = $(CFLAGS_DSP)
|
|
CFLAGS_process.o = $(CFLAGS_DSP)
|
|
CFLAGS_branch.o = $(CFLAGS_DSP)
|
|
CFLAGS_ptrace.o = $(CFLAGS_DSP)
|
|
endif
|
|
|
|
CPPFLAGS_vmlinux.lds := $(KBUILD_CFLAGS)
|