linux-xiaomi-chiron/drivers/usb/serial
Zhengjun Zhang 2829a4e3cf USB: serial: option: add new VID/PID to support Fibocom FG150
Fibocom FG150 is a 5G module based on Qualcomm SDX55 platform,
support Sub-6G band.

Here are the outputs of lsusb -v and usb-devices:

> T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
> D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
> P:  Vendor=2cb7 ProdID=010b Rev=04.14
> S:  Manufacturer=Fibocom
> S:  Product=Fibocom Modem_SN:XXXXXXXX
> S:  SerialNumber=XXXXXXXX
> C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
> I:  If#=0x0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
> I:  If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
> I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
> I:  If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)

> Bus 002 Device 002: ID 2cb7:010b Fibocom Fibocom Modem_SN:XXXXXXXX
> Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               3.20
>   bDeviceClass            0
>   bDeviceSubClass         0
>   bDeviceProtocol         0
>   bMaxPacketSize0         9
>   idVendor           0x2cb7 Fibocom
>   idProduct          0x010b
>   bcdDevice            4.14
>   iManufacturer           1 Fibocom
>   iProduct                2 Fibocom Modem_SN:XXXXXXXX
>   iSerial                 3 XXXXXXXX
>   bNumConfigurations      1
>   Configuration Descriptor:
>     bLength                 9
>     bDescriptorType         2
>     wTotalLength       0x00e6
>     bNumInterfaces          5
>     bConfigurationValue     1
>     iConfiguration          4 RNDIS_DUN_DIAG_ADB
>     bmAttributes         0xa0
>       (Bus Powered)
>       Remote Wakeup
>     MaxPower              896mA
>     Interface Association:
>       bLength                 8
>       bDescriptorType        11
>       bFirstInterface         0
>       bInterfaceCount         2
>       bFunctionClass        239 Miscellaneous Device
>       bFunctionSubClass       4
>       bFunctionProtocol       1
>       iFunction               7 RNDIS
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        0
>       bAlternateSetting       0
>       bNumEndpoints           1
>       bInterfaceClass       239 Miscellaneous Device
>       bInterfaceSubClass      4
>       bInterfaceProtocol      1
>       iInterface              0
>       ** UNRECOGNIZED:  05 24 00 10 01
>       ** UNRECOGNIZED:  05 24 01 00 01
>       ** UNRECOGNIZED:  04 24 02 00
>       ** UNRECOGNIZED:  05 24 06 00 01
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x81  EP 1 IN
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0008  1x 8 bytes
>         bInterval               9
>         bMaxBurst               0
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        1
>       bAlternateSetting       0
>       bNumEndpoints           2
>       bInterfaceClass        10 CDC Data
>       bInterfaceSubClass      0
>       bInterfaceProtocol      0
>       iInterface              0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x8e  EP 14 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               6
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x0f  EP 15 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               6
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        2
>       bAlternateSetting       0
>       bNumEndpoints           3
>       bInterfaceClass       255 Vendor Specific Class
>       bInterfaceSubClass      0
>       bInterfaceProtocol      0
>       iInterface              0
>       ** UNRECOGNIZED:  05 24 00 10 01
>       ** UNRECOGNIZED:  05 24 01 00 00
>       ** UNRECOGNIZED:  04 24 02 02
>       ** UNRECOGNIZED:  05 24 06 00 00
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x83  EP 3 IN
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x000a  1x 10 bytes
>         bInterval               9
>         bMaxBurst               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x82  EP 2 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x01  EP 1 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        3
>       bAlternateSetting       0
>       bNumEndpoints           2
>       bInterfaceClass       255 Vendor Specific Class
>       bInterfaceSubClass    255 Vendor Specific Subclass
>       bInterfaceProtocol     48
>       iInterface              0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x84  EP 4 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x02  EP 2 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        4
>       bAlternateSetting       0
>       bNumEndpoints           2
>       bInterfaceClass       255 Vendor Specific Class
>       bInterfaceSubClass     66
>       bInterfaceProtocol      1
>       iInterface              0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x03  EP 3 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x85  EP 5 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
> Binary Object Store Descriptor:
>   bLength                 5
>   bDescriptorType        15
>   wTotalLength       0x0016
>   bNumDeviceCaps          2
>   USB 2.0 Extension Device Capability:
>     bLength                 7
>     bDescriptorType        16
>     bDevCapabilityType      2
>     bmAttributes   0x00000006
>       BESL Link Power Management (LPM) Supported
>   SuperSpeed USB Device Capability:
>     bLength                10
>     bDescriptorType        16
>     bDevCapabilityType      3
>     bmAttributes         0x00
>     wSpeedsSupported   0x000f
>       Device can operate at Low Speed (1Mbps)
>       Device can operate at Full Speed (12Mbps)
>       Device can operate at High Speed (480Mbps)
>       Device can operate at SuperSpeed (5Gbps)
>     bFunctionalitySupport   1
>       Lowest fully-functional device speed is Full Speed (12Mbps)
>     bU1DevExitLat           1 micro seconds
>     bU2DevExitLat         500 micro seconds
> Device Status:     0x0000
>   (Bus Powered)

Signed-off-by: Zhengjun Zhang <zhangzhengjun@aicrobo.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
2021-08-24 15:46:09 +02:00
..
aircable.c USB: serial: drop redundant transfer-buffer casts 2020-07-09 09:20:17 +02:00
ark3116.c USB: serial: stop reporting legacy UART types 2021-04-08 09:46:02 +02:00
belkin_sa.c tty: make use of tty_get_{char,frame}_size 2021-06-15 14:03:27 +02:00
belkin_sa.h USB: serial: Use the correct style for SPDX License Identifier 2020-04-22 09:26:47 +02:00
bus.c USB: serial: drop bogus to_usb_serial_port() checks 2021-02-09 13:14:30 +01:00
ch341.c USB: serial: ch341: fix character loss at high transfer rates 2021-07-29 13:52:10 +02:00
console.c USB: serial: console: add support for flow control 2020-07-02 10:38:45 +02:00
cp210x.c USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick 2021-07-21 18:42:55 +02:00
cyberjack.c USB: serial: make usb_serial_driver::write_room return uint 2021-05-19 10:56:40 +02:00
cypress_m8.c USB / Thunderbolt patches for 5.14-rc1 2021-07-05 14:16:22 -07:00
cypress_m8.h USB: serial: cypress_m8: enable Simply Automated UPB PIM 2020-06-23 09:56:17 +02:00
digi_acceleport.c USB: serial: drop irq-flags initialisations 2021-05-21 15:46:25 +02:00
empeg.c docs: usb: rename files to .rst and add them to drivers-api 2019-06-20 14:28:36 +02:00
ezusb_convert.pl License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
f81232.c USB: serial: f81232: drop time-based drain delay 2021-04-13 18:19:28 +02:00
f81534.c USB: serial: stop reporting legacy UART types 2021-04-08 09:46:02 +02:00
ftdi_sio.c USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2 2021-08-05 09:47:25 +02:00
ftdi_sio.h USB: Fix up terminology 2020-07-01 14:04:04 +02:00
ftdi_sio_ids.h USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2 2021-08-05 09:47:25 +02:00
garmin_gps.c USB: serial: make usb_serial_driver::write_room return uint 2021-05-19 10:56:40 +02:00
generic.c USB: serial: make usb_serial_driver::chars_in_buffer return uint 2021-05-19 10:56:41 +02:00
io_16654.h USB: serial: Use the correct style for SPDX License Identifier 2020-04-22 09:26:47 +02:00
io_edgeport.c USB: serial: io_edgeport: drop buffer-callback sanity checks 2021-05-21 15:46:08 +02:00
io_edgeport.h USB: serial: io_edgeport: drop unused definitions 2021-04-08 09:50:04 +02:00
io_ionsp.h USB: serial: Use the correct style for SPDX License Identifier 2020-04-22 09:26:47 +02:00
io_ti.c USB: serial: make usb_serial_driver::chars_in_buffer return uint 2021-05-19 10:56:41 +02:00
io_ti.h USB: serial: io_ti: drop unnecessary packed attributes 2021-04-13 18:23:34 +02:00
io_usbvend.h USB: serial: Use the correct style for SPDX License Identifier 2020-04-22 09:26:47 +02:00
ipaq.c USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
ipw.c USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
ir-usb.c USB: serial: make usb_serial_driver::write_room return uint 2021-05-19 10:56:40 +02:00
iuu_phoenix.c USB: serial: iuu_phoenix: remove redundant variable 'error' 2021-04-01 09:53:14 +02:00
iuu_phoenix.h USB: serial: Use the correct style for SPDX License Identifier 2020-04-22 09:26:47 +02:00
Kconfig USB: serial: add MaxLinear/Exar USB to Serial driver 2021-01-21 10:49:37 +01:00
keyspan.c USB: serial: make usb_serial_driver::write_room return uint 2021-05-19 10:56:40 +02:00
keyspan_pda.c USB: serial: make remove callback return void 2021-02-09 13:13:58 +01:00
keyspan_usa26msg.h USB: serial: keyspan_usa: add proper SPDX lines for .h files 2019-01-18 11:09:32 +01:00
keyspan_usa28msg.h USB: serial: keyspan_usa: add proper SPDX lines for .h files 2019-01-18 11:09:32 +01:00
keyspan_usa49msg.h USB: serial: keyspan_usa: add proper SPDX lines for .h files 2019-01-18 11:09:32 +01:00
keyspan_usa67msg.h USB: serial: keyspan_usa: add proper SPDX lines for .h files 2019-01-18 11:09:32 +01:00
keyspan_usa90msg.h USB: serial: keyspan_usa: add proper SPDX lines for .h files 2019-01-18 11:09:32 +01:00
kl5kusb105.c USB: serial: make remove callback return void 2021-02-09 13:13:58 +01:00
kl5kusb105.h USB: serial: kl5kusb105: remove KLSI device id 2018-07-11 10:11:29 +02:00
kobil_sct.c USB: serial: make usb_serial_driver::write_room return uint 2021-05-19 10:56:40 +02:00
kobil_sct.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
Makefile USB: serial: add MaxLinear/Exar USB to Serial driver 2021-01-21 10:49:37 +01:00
Makefile-keyspan_pda_fw USB: add SPDX identifiers to all remaining Makefiles 2017-11-07 15:53:48 +01:00
mct_u232.c USB: serial: make remove callback return void 2021-02-09 13:13:58 +01:00
mct_u232.h USB: serial: Use the correct style for SPDX License Identifier 2020-04-22 09:26:47 +02:00
metro-usb.c USB: serial: drop irq-flags initialisations 2021-05-21 15:46:25 +02:00
mos7720.c USB: serial: mos7720: drop buffer-callback sanity checks 2021-05-21 15:46:15 +02:00
mos7840.c USB: serial: mos7840: drop buffer-callback return-value comments 2021-05-21 15:46:20 +02:00
mxuport.c USB: serial: mxuport: drop short control-transfer check 2021-01-18 14:26:14 +01:00
navman.c USB: serial: fix module-license macros 2017-11-04 11:58:00 +01:00
omninet.c USB: serial: omninet: update driver description 2021-05-25 08:59:17 +02:00
opticon.c USB: serial: make usb_serial_driver::chars_in_buffer return uint 2021-05-19 10:56:41 +02:00
option.c USB: serial: option: add new VID/PID to support Fibocom FG150 2021-08-24 15:46:09 +02:00
oti6858.c USB: serial: make usb_serial_driver::chars_in_buffer return uint 2021-05-19 10:56:41 +02:00
oti6858.h USB: serial: Use the correct style for SPDX License Identifier 2020-04-22 09:26:47 +02:00
pl2303.c USB: serial: pl2303: fix GT type detection 2021-08-04 11:33:10 +02:00
pl2303.h USB: serial: pl2303: add device id for ADLINK ND-6530 GC 2021-05-10 11:15:23 +02:00
qcaux.c USB: serial: fix module-license macros 2017-11-04 11:58:00 +01:00
qcserial.c USB: serial: qcserial: fix altsetting probing 2020-10-01 09:37:30 +02:00
quatech2.c USB-serial updates for 5.14-rc1 2021-06-24 12:54:28 +02:00
safe_serial.c USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
sierra.c USB: serial: make usb_serial_driver::chars_in_buffer return uint 2021-05-19 10:56:41 +02:00
spcp8x5.c USB: serial: make remove callback return void 2021-02-09 13:13:58 +01:00
ssu100.c USB: serial: add generic support for TIOCSSERIAL 2021-04-08 09:46:02 +02:00
symbolserial.c USB: serial: make remove callback return void 2021-02-09 13:13:58 +01:00
ti_usb_3410_5052.c USB-serial updates for 5.14-rc1 2021-06-24 12:54:28 +02:00
upd78f0730.c USB: serial: do not use tty class device for debugging 2021-04-09 17:55:21 +02:00
usb-serial-simple.c USB: serial: simple: Add Motorola Solutions TETRA MTP3xxx and MTP85xx 2020-01-13 15:04:35 +01:00
usb-serial.c tty: make tty_operations::chars_in_buffer return uint 2021-05-13 18:29:11 +02:00
usb-wwan.h USB: serial: make usb_serial_driver::chars_in_buffer return uint 2021-05-19 10:56:41 +02:00
usb_debug.c USB: serial: usb_debug: add new USB device id 2017-11-28 09:54:11 +01:00
usb_wwan.c USB: serial: make usb_serial_driver::chars_in_buffer return uint 2021-05-19 10:56:41 +02:00
visor.c docs: usb: rename files to .rst and add them to drivers-api 2019-06-20 14:28:36 +02:00
visor.h USB: serial: Use the correct style for SPDX License Identifier 2020-04-22 09:26:47 +02:00
whiteheat.c tty: make use of tty_get_{char,frame}_size 2021-06-15 14:03:27 +02:00
whiteheat.h USB: serial: Use the correct style for SPDX License Identifier 2020-04-22 09:26:47 +02:00
wishbone-serial.c USB: serial: Remove redundant license text 2017-11-04 11:55:38 +01:00
xr_serial.c USB: serial: xr: add copyright notice 2021-04-13 18:36:39 +02:00
xsens_mt.c USB: serial: fix module-license macros 2017-11-04 11:58:00 +01:00