arm64: dts: qcom: msm8998-oneplus-common: enable RRADC

Enable the Round Robin ADC for the OnePlus 5/5T.

Signed-off-by: Jami Kettunen <jami.kettunen@somainline.org>

.clang-format

@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 #
-# clang-format configuration file. Intended for clang-format >= 11.
+# clang-format configuration file. Intended for clang-format >= 4.
 #
 # For more information, see:
 #
@@ -13,7 +13,7 @@ AccessModifierOffset: -4
 AlignAfterOpenBracket: Align
 AlignConsecutiveAssignments: false
 AlignConsecutiveDeclarations: false
-AlignEscapedNewlines: Left
+#AlignEscapedNewlines: Left # Unknown to clang-format-4.0
 AlignOperands: true
 AlignTrailingComments: false
 AllowAllParametersOfDeclarationOnNextLine: false
@@ -37,24 +37,24 @@ BraceWrapping:
   AfterObjCDeclaration: false
   AfterStruct: false
   AfterUnion: false
-  AfterExternBlock: false
+  #AfterExternBlock: false # Unknown to clang-format-5.0
   BeforeCatch: false
   BeforeElse: false
   IndentBraces: false
-  SplitEmptyFunction: true
-  SplitEmptyRecord: true
-  SplitEmptyNamespace: true
+  #SplitEmptyFunction: true # Unknown to clang-format-4.0
+  #SplitEmptyRecord: true # Unknown to clang-format-4.0
+  #SplitEmptyNamespace: true # Unknown to clang-format-4.0
 BreakBeforeBinaryOperators: None
 BreakBeforeBraces: Custom
-BreakBeforeInheritanceComma: false
+#BreakBeforeInheritanceComma: false # Unknown to clang-format-4.0
 BreakBeforeTernaryOperators: false
 BreakConstructorInitializersBeforeComma: false
-BreakConstructorInitializers: BeforeComma
+#BreakConstructorInitializers: BeforeComma # Unknown to clang-format-4.0
 BreakAfterJavaFieldAnnotations: false
 BreakStringLiterals: false
 ColumnLimit: 80
 CommentPragmas: '^ IWYU pragma:'
-CompactNamespaces: false
+#CompactNamespaces: false # Unknown to clang-format-4.0
 ConstructorInitializerAllOnOneLineOrOnePerLine: false
 ConstructorInitializerIndentWidth: 8
 ContinuationIndentWidth: 8
@@ -62,56 +62,39 @@ Cpp11BracedListStyle: false
 DerivePointerAlignment: false
 DisableFormat: false
 ExperimentalAutoDetectBinPacking: false
-FixNamespaceComments: false
+#FixNamespaceComments: false # Unknown to clang-format-4.0
 
 # Taken from:
-#   git grep -h '^#define [^[:space:]]*for_each[^[:space:]]*(' include/ tools/ \
+#   git grep -h '^#define [^[:space:]]*for_each[^[:space:]]*(' include/ \
 #   | sed "s,^#define \([^[:space:]]*for_each[^[:space:]]*\)(.*$,  - '\1'," \
-#   | LC_ALL=C sort -u
+#   | sort | uniq
 ForEachMacros:
-  - '__ata_qc_for_each'
-  - '__bio_for_each_bvec'
-  - '__bio_for_each_segment'
-  - '__evlist__for_each_entry'
-  - '__evlist__for_each_entry_continue'
-  - '__evlist__for_each_entry_from'
-  - '__evlist__for_each_entry_reverse'
-  - '__evlist__for_each_entry_safe'
-  - '__for_each_mem_range'
-  - '__for_each_mem_range_rev'
-  - '__for_each_thread'
-  - '__hlist_for_each_rcu'
-  - '__map__for_each_symbol_by_name'
-  - '__perf_evlist__for_each_entry'
-  - '__perf_evlist__for_each_entry_reverse'
-  - '__perf_evlist__for_each_entry_safe'
-  - '__rq_for_each_bio'
-  - '__shost_for_each_device'
   - 'apei_estatus_for_each_section'
   - 'ata_for_each_dev'
   - 'ata_for_each_link'
+  - '__ata_qc_for_each'
   - 'ata_qc_for_each'
   - 'ata_qc_for_each_raw'
   - 'ata_qc_for_each_with_internal'
   - 'ax25_for_each'
   - 'ax25_uid_for_each'
+  - '__bio_for_each_bvec'
   - 'bio_for_each_bvec'
   - 'bio_for_each_bvec_all'
-  - 'bio_for_each_folio_all'
   - 'bio_for_each_integrity_vec'
+  - '__bio_for_each_segment'
   - 'bio_for_each_segment'
   - 'bio_for_each_segment_all'
   - 'bio_list_for_each'
   - 'bip_for_each_vec'
+  - 'bitmap_for_each_clear_region'
+  - 'bitmap_for_each_set_region'
+  - 'blkg_for_each_descendant_post'
+  - 'blkg_for_each_descendant_pre'
+  - 'blk_queue_for_each_rl'
   - 'bond_for_each_slave'
   - 'bond_for_each_slave_rcu'
-  - 'bpf__perf_for_each_map'
-  - 'bpf__perf_for_each_map_named'
   - 'bpf_for_each_spilled_reg'
-  - 'bpf_object__for_each_map'
-  - 'bpf_object__for_each_program'
-  - 'bpf_object__for_each_safe'
-  - 'bpf_perf_object__for_each'
   - 'btree_for_each_safe128'
   - 'btree_for_each_safe32'
   - 'btree_for_each_safe64'
@@ -119,7 +102,6 @@ ForEachMacros:
   - 'card_for_each_dev'
   - 'cgroup_taskset_for_each'
   - 'cgroup_taskset_for_each_leader'
-  - 'cpufreq_for_each_efficient_entry_idx'
   - 'cpufreq_for_each_entry'
   - 'cpufreq_for_each_entry_idx'
   - 'cpufreq_for_each_valid_entry'
@@ -127,22 +109,9 @@ ForEachMacros:
   - 'css_for_each_child'
   - 'css_for_each_descendant_post'
   - 'css_for_each_descendant_pre'
-  - 'damon_for_each_region'
-  - 'damon_for_each_region_safe'
-  - 'damon_for_each_scheme'
-  - 'damon_for_each_scheme_safe'
-  - 'damon_for_each_target'
-  - 'damon_for_each_target_safe'
-  - 'data__for_each_file'
-  - 'data__for_each_file_new'
-  - 'data__for_each_file_start'
   - 'device_for_each_child_node'
   - 'displayid_iter_for_each'
-  - 'dma_fence_array_for_each'
   - 'dma_fence_chain_for_each'
-  - 'dma_fence_unwrap_for_each'
-  - 'dma_resv_for_each_fence'
-  - 'dma_resv_for_each_fence_unlocked'
   - 'do_for_each_ftrace_op'
   - 'drm_atomic_crtc_for_each_plane'
   - 'drm_atomic_crtc_state_for_each_plane'
@@ -166,25 +135,6 @@ ForEachMacros:
   - 'drm_mm_for_each_node'
   - 'drm_mm_for_each_node_in_range'
   - 'drm_mm_for_each_node_safe'
-  - 'dsa_switch_for_each_available_port'
-  - 'dsa_switch_for_each_cpu_port'
-  - 'dsa_switch_for_each_port'
-  - 'dsa_switch_for_each_port_continue_reverse'
-  - 'dsa_switch_for_each_port_safe'
-  - 'dsa_switch_for_each_user_port'
-  - 'dsa_tree_for_each_user_port'
-  - 'dso__for_each_symbol'
-  - 'dsos__for_each_with_build_id'
-  - 'elf_hash_for_each_possible'
-  - 'elf_section__for_each_rel'
-  - 'elf_section__for_each_rela'
-  - 'elf_symtab__for_each_symbol'
-  - 'evlist__for_each_cpu'
-  - 'evlist__for_each_entry'
-  - 'evlist__for_each_entry_continue'
-  - 'evlist__for_each_entry_from'
-  - 'evlist__for_each_entry_reverse'
-  - 'evlist__for_each_entry_safe'
   - 'flow_action_for_each'
   - 'for_each_acpi_dev_match'
   - 'for_each_active_dev_scope'
@@ -192,11 +142,8 @@ ForEachMacros:
   - 'for_each_active_iommu'
   - 'for_each_aggr_pgid'
   - 'for_each_available_child_of_node'
-  - 'for_each_bench'
   - 'for_each_bio'
   - 'for_each_board_func_rsrc'
-  - 'for_each_btf_ext_rec'
-  - 'for_each_btf_ext_sec'
   - 'for_each_bvec'
   - 'for_each_card_auxs'
   - 'for_each_card_auxs_safe'
@@ -212,22 +159,17 @@ ForEachMacros:
   - 'for_each_child_of_node'
   - 'for_each_clear_bit'
   - 'for_each_clear_bit_from'
-  - 'for_each_clear_bitrange'
-  - 'for_each_clear_bitrange_from'
-  - 'for_each_cmd'
   - 'for_each_cmsghdr'
-  - 'for_each_collection'
-  - 'for_each_comp_order'
   - 'for_each_compatible_node'
   - 'for_each_component_dais'
   - 'for_each_component_dais_safe'
+  - 'for_each_comp_order'
   - 'for_each_console'
   - 'for_each_cpu'
   - 'for_each_cpu_and'
   - 'for_each_cpu_not'
   - 'for_each_cpu_wrap'
   - 'for_each_dapm_widgets'
-  - 'for_each_dedup_cand'
   - 'for_each_dev_addr'
   - 'for_each_dev_scope'
   - 'for_each_dma_cap_mask'
@@ -237,14 +179,13 @@ ForEachMacros:
   - 'for_each_dpcm_fe'
   - 'for_each_drhd_unit'
   - 'for_each_dss_dev'
+  - 'for_each_dtpm_table'
   - 'for_each_efi_memory_desc'
   - 'for_each_efi_memory_desc_in_map'
   - 'for_each_element'
   - 'for_each_element_extid'
   - 'for_each_element_id'
   - 'for_each_endpoint_of_node'
-  - 'for_each_event'
-  - 'for_each_event_tps'
   - 'for_each_evictable_lru'
   - 'for_each_fib6_node_rt_rcu'
   - 'for_each_fib6_walker_rt'
@@ -253,35 +194,30 @@ ForEachMacros:
   - 'for_each_free_mem_range'
   - 'for_each_free_mem_range_reverse'
   - 'for_each_func_rsrc'
-  - 'for_each_group_evsel'
-  - 'for_each_group_member'
   - 'for_each_hstate'
   - 'for_each_if'
-  - 'for_each_inject_fn'
-  - 'for_each_insn'
-  - 'for_each_insn_prefix'
-  - 'for_each_intid'
   - 'for_each_iommu'
   - 'for_each_ip_tunnel_rcu'
   - 'for_each_irq_nr'
-  - 'for_each_lang'
   - 'for_each_link_codecs'
   - 'for_each_link_cpus'
   - 'for_each_link_platforms'
   - 'for_each_lru'
   - 'for_each_matching_node'
   - 'for_each_matching_node_and_match'
+  - 'for_each_member'
+  - 'for_each_memcg_cache_index'
   - 'for_each_mem_pfn_range'
+  - '__for_each_mem_range'
   - 'for_each_mem_range'
+  - '__for_each_mem_range_rev'
   - 'for_each_mem_range_rev'
   - 'for_each_mem_region'
-  - 'for_each_member'
-  - 'for_each_memory'
   - 'for_each_migratetype_order'
-  - 'for_each_missing_reg'
+  - 'for_each_msi_entry'
+  - 'for_each_msi_entry_safe'
   - 'for_each_net'
   - 'for_each_net_continue_reverse'
-  - 'for_each_net_rcu'
   - 'for_each_netdev'
   - 'for_each_netdev_continue'
   - 'for_each_netdev_continue_rcu'
@@ -291,13 +227,12 @@ ForEachMacros:
   - 'for_each_netdev_rcu'
   - 'for_each_netdev_reverse'
   - 'for_each_netdev_safe'
+  - 'for_each_net_rcu'
   - 'for_each_new_connector_in_state'
   - 'for_each_new_crtc_in_state'
   - 'for_each_new_mst_mgr_in_state'
   - 'for_each_new_plane_in_state'
-  - 'for_each_new_plane_in_state_reverse'
   - 'for_each_new_private_obj_in_state'
-  - 'for_each_new_reg'
   - 'for_each_node'
   - 'for_each_node_by_name'
   - 'for_each_node_by_type'
@@ -313,20 +248,20 @@ ForEachMacros:
   - 'for_each_old_connector_in_state'
   - 'for_each_old_crtc_in_state'
   - 'for_each_old_mst_mgr_in_state'
-  - 'for_each_old_plane_in_state'
-  - 'for_each_old_private_obj_in_state'
   - 'for_each_oldnew_connector_in_state'
   - 'for_each_oldnew_crtc_in_state'
   - 'for_each_oldnew_mst_mgr_in_state'
   - 'for_each_oldnew_plane_in_state'
   - 'for_each_oldnew_plane_in_state_reverse'
   - 'for_each_oldnew_private_obj_in_state'
+  - 'for_each_old_plane_in_state'
+  - 'for_each_old_private_obj_in_state'
   - 'for_each_online_cpu'
   - 'for_each_online_node'
   - 'for_each_online_pgdat'
-  - 'for_each_path'
   - 'for_each_pci_bridge'
   - 'for_each_pci_dev'
+  - 'for_each_pci_msi_entry'
   - 'for_each_pcm_streams'
   - 'for_each_physmem_range'
   - 'for_each_populated_zone'
@@ -334,7 +269,6 @@ ForEachMacros:
   - 'for_each_present_cpu'
   - 'for_each_prime_number'
   - 'for_each_prime_number_from'
-  - 'for_each_probe_cache_entry'
   - 'for_each_process'
   - 'for_each_process_thread'
   - 'for_each_prop_codec_conf'
@@ -344,8 +278,6 @@ ForEachMacros:
   - 'for_each_prop_dlc_cpus'
   - 'for_each_prop_dlc_platforms'
   - 'for_each_property_of_node'
-  - 'for_each_reg'
-  - 'for_each_reg_filtered'
   - 'for_each_registered_fb'
   - 'for_each_requested_gpio'
   - 'for_each_requested_gpio_in_range'
@@ -355,12 +287,8 @@ ForEachMacros:
   - 'for_each_rtd_components'
   - 'for_each_rtd_cpu_dais'
   - 'for_each_rtd_dais'
-  - 'for_each_script'
-  - 'for_each_sec'
   - 'for_each_set_bit'
   - 'for_each_set_bit_from'
-  - 'for_each_set_bitrange'
-  - 'for_each_set_bitrange_from'
   - 'for_each_set_clump8'
   - 'for_each_sg'
   - 'for_each_sg_dma_page'
@@ -369,25 +297,18 @@ ForEachMacros:
   - 'for_each_sgtable_dma_sg'
   - 'for_each_sgtable_page'
   - 'for_each_sgtable_sg'
-  - 'for_each_shell_test'
   - 'for_each_sibling_event'
   - 'for_each_subelement'
   - 'for_each_subelement_extid'
   - 'for_each_subelement_id'
-  - 'for_each_sublist'
-  - 'for_each_subsystem'
-  - 'for_each_supported_activate_fn'
-  - 'for_each_supported_inject_fn'
-  - 'for_each_test'
+  - '__for_each_thread'
   - 'for_each_thread'
-  - 'for_each_token'
   - 'for_each_unicast_dest_pgid'
   - 'for_each_vsi'
   - 'for_each_wakeup_source'
   - 'for_each_zone'
   - 'for_each_zone_zonelist'
   - 'for_each_zone_zonelist_nodemask'
-  - 'func_for_each_insn'
   - 'fwnode_for_each_available_child_node'
   - 'fwnode_for_each_child_node'
   - 'fwnode_graph_for_each_endpoint'
@@ -401,13 +322,7 @@ ForEachMacros:
   - 'hash_for_each_possible_safe'
   - 'hash_for_each_rcu'
   - 'hash_for_each_safe'
-  - 'hashmap__for_each_entry'
-  - 'hashmap__for_each_entry_safe'
-  - 'hashmap__for_each_key_entry'
-  - 'hashmap__for_each_key_entry_safe'
   - 'hctx_for_each_ctx'
-  - 'hists__for_each_format'
-  - 'hists__for_each_sort_list'
   - 'hlist_bl_for_each_entry'
   - 'hlist_bl_for_each_entry_rcu'
   - 'hlist_bl_for_each_entry_safe'
@@ -423,6 +338,7 @@ ForEachMacros:
   - 'hlist_for_each_entry_rcu_notrace'
   - 'hlist_for_each_entry_safe'
   - 'hlist_for_each_entry_srcu'
+  - '__hlist_for_each_rcu'
   - 'hlist_for_each_safe'
   - 'hlist_nulls_for_each_entry'
   - 'hlist_nulls_for_each_entry_from'
@@ -430,6 +346,9 @@ ForEachMacros:
   - 'hlist_nulls_for_each_entry_safe'
   - 'i3c_bus_for_each_i2cdev'
   - 'i3c_bus_for_each_i3cdev'
+  - 'ide_host_for_each_port'
+  - 'ide_port_for_each_dev'
+  - 'ide_port_for_each_present_dev'
   - 'idr_for_each_entry'
   - 'idr_for_each_entry_continue'
   - 'idr_for_each_entry_continue_ul'
@@ -437,12 +356,7 @@ ForEachMacros:
   - 'in_dev_for_each_ifa_rcu'
   - 'in_dev_for_each_ifa_rtnl'
   - 'inet_bind_bucket_for_each'
-  - 'inet_lhash2_for_each_icsk'
-  - 'inet_lhash2_for_each_icsk_continue'
   - 'inet_lhash2_for_each_icsk_rcu'
-  - 'intlist__for_each_entry'
-  - 'intlist__for_each_entry_safe'
-  - 'kcore_copy__for_each_phdr'
   - 'key_for_each'
   - 'key_for_each_safe'
   - 'klp_for_each_func'
@@ -453,9 +367,7 @@ ForEachMacros:
   - 'klp_for_each_object_static'
   - 'kunit_suite_for_each_test_case'
   - 'kvm_for_each_memslot'
-  - 'kvm_for_each_memslot_in_gfn_range'
   - 'kvm_for_each_vcpu'
-  - 'libbpf_nla_for_each_attr'
   - 'list_for_each'
   - 'list_for_each_codec'
   - 'list_for_each_codec_safe'
@@ -475,7 +387,6 @@ ForEachMacros:
   - 'list_for_each_entry_safe_from'
   - 'list_for_each_entry_safe_reverse'
   - 'list_for_each_entry_srcu'
-  - 'list_for_each_from'
   - 'list_for_each_prev'
   - 'list_for_each_prev_safe'
   - 'list_for_each_safe'
@@ -483,18 +394,11 @@ ForEachMacros:
   - 'llist_for_each_entry'
   - 'llist_for_each_entry_safe'
   - 'llist_for_each_safe'
-  - 'map__for_each_symbol'
-  - 'map__for_each_symbol_by_name'
-  - 'map_for_each_event'
-  - 'map_for_each_metric'
-  - 'maps__for_each_entry'
-  - 'maps__for_each_entry_safe'
   - 'mci_for_each_dimm'
   - 'media_device_for_each_entity'
   - 'media_device_for_each_intf'
   - 'media_device_for_each_link'
   - 'media_device_for_each_pad'
-  - 'msi_for_each_desc'
   - 'nanddev_io_for_each_page'
   - 'netdev_for_each_lower_dev'
   - 'netdev_for_each_lower_private'
@@ -516,24 +420,9 @@ ForEachMacros:
   - 'of_property_for_each_string'
   - 'of_property_for_each_u32'
   - 'pci_bus_for_each_resource'
-  - 'pci_doe_for_each_off'
   - 'pcl_for_each_chunk'
   - 'pcl_for_each_segment'
   - 'pcm_for_each_format'
-  - 'perf_config_items__for_each_entry'
-  - 'perf_config_sections__for_each_entry'
-  - 'perf_config_set__for_each_entry'
-  - 'perf_cpu_map__for_each_cpu'
-  - 'perf_evlist__for_each_entry'
-  - 'perf_evlist__for_each_entry_reverse'
-  - 'perf_evlist__for_each_entry_safe'
-  - 'perf_evlist__for_each_evsel'
-  - 'perf_evlist__for_each_mmap'
-  - 'perf_hpp_list__for_each_format'
-  - 'perf_hpp_list__for_each_format_safe'
-  - 'perf_hpp_list__for_each_sort_list'
-  - 'perf_hpp_list__for_each_sort_list_safe'
-  - 'perf_pmu__for_each_hybrid_pmu'
   - 'ping_portaddr_for_each_entry'
   - 'plist_for_each'
   - 'plist_for_each_continue'
@@ -553,7 +442,6 @@ ForEachMacros:
   - 'rdma_for_each_block'
   - 'rdma_for_each_port'
   - 'rdma_umem_for_each_dma_block'
-  - 'resort_rb__for_each_entry'
   - 'resource_list_for_each_entry'
   - 'resource_list_for_each_entry_safe'
   - 'rhl_for_each_entry_rcu'
@@ -567,18 +455,15 @@ ForEachMacros:
   - 'rht_for_each_from'
   - 'rht_for_each_rcu'
   - 'rht_for_each_rcu_from'
+  - '__rq_for_each_bio'
   - 'rq_for_each_bvec'
   - 'rq_for_each_segment'
-  - 'rq_list_for_each'
-  - 'rq_list_for_each_safe'
   - 'scsi_for_each_prot_sg'
   - 'scsi_for_each_sg'
   - 'sctp_for_each_hentry'
   - 'sctp_skb_for_each'
-  - 'sec_for_each_insn'
-  - 'sec_for_each_insn_continue'
-  - 'sec_for_each_insn_from'
   - 'shdma_for_each_chan'
+  - '__shost_for_each_device'
   - 'shost_for_each_device'
   - 'sk_for_each'
   - 'sk_for_each_bound'
@@ -595,13 +480,7 @@ ForEachMacros:
   - 'snd_soc_dapm_widget_for_each_path_safe'
   - 'snd_soc_dapm_widget_for_each_sink_path'
   - 'snd_soc_dapm_widget_for_each_source_path'
-  - 'strlist__for_each_entry'
-  - 'strlist__for_each_entry_safe'
-  - 'sym_for_each_insn'
-  - 'sym_for_each_insn_continue_reverse'
-  - 'symbols__for_each_entry'
   - 'tb_property_for_each'
-  - 'tcf_act_for_each_action'
   - 'tcf_exts_for_each_action'
   - 'udp_portaddr_for_each_entry'
   - 'udp_portaddr_for_each_entry_rcu'
@@ -625,17 +504,15 @@ ForEachMacros:
   - 'xbc_node_for_each_array_value'
   - 'xbc_node_for_each_child'
   - 'xbc_node_for_each_key_value'
-  - 'xbc_node_for_each_subkey'
   - 'zorro_for_each_dev'
 
-IncludeBlocks: Preserve
+#IncludeBlocks: Preserve # Unknown to clang-format-5.0
 IncludeCategories:
   - Regex: '.*'
     Priority: 1
 IncludeIsMainRegex: '(Test)?$'
 IndentCaseLabels: false
-IndentGotoLabels: false
-IndentPPDirectives: None
+#IndentPPDirectives: None # Unknown to clang-format-5.0
 IndentWidth: 8
 IndentWrappedFunctionNames: false
 JavaScriptQuotes: Leave
@@ -645,13 +522,13 @@ MacroBlockBegin: ''
 MacroBlockEnd: ''
 MaxEmptyLinesToKeep: 1
 NamespaceIndentation: None
-ObjCBinPackProtocolList: Auto
+#ObjCBinPackProtocolList: Auto # Unknown to clang-format-5.0
 ObjCBlockIndentWidth: 8
 ObjCSpaceAfterProperty: true
 ObjCSpaceBeforeProtocolList: true
 
 # Taken from git's rules
-PenaltyBreakAssignment: 10
+#PenaltyBreakAssignment: 10 # Unknown to clang-format-4.0
 PenaltyBreakBeforeFirstCallParameter: 30
 PenaltyBreakComment: 10
 PenaltyBreakFirstLessLess: 0
@@ -662,14 +539,14 @@ PenaltyReturnTypeOnItsOwnLine: 60
 PointerAlignment: Right
 ReflowComments: false
 SortIncludes: false
-SortUsingDeclarations: false
+#SortUsingDeclarations: false # Unknown to clang-format-4.0
 SpaceAfterCStyleCast: false
 SpaceAfterTemplateKeyword: true
 SpaceBeforeAssignmentOperators: true
-SpaceBeforeCtorInitializerColon: true
-SpaceBeforeInheritanceColon: true
-SpaceBeforeParens: ControlStatementsExceptForEachMacros
-SpaceBeforeRangeBasedForLoopColon: true
+#SpaceBeforeCtorInitializerColon: true # Unknown to clang-format-5.0
+#SpaceBeforeInheritanceColon: true # Unknown to clang-format-5.0
+SpaceBeforeParens: ControlStatements
+#SpaceBeforeRangeBasedForLoopColon: true # Unknown to clang-format-5.0
 SpaceInEmptyParentheses: false
 SpacesBeforeTrailingComments: 1
 SpacesInAngles: false

.get_maintainer.ignore

@@ -1,4 +1,2 @@
-Alan Cox <alan@lxorguk.ukuu.org.uk>
-Alan Cox <root@hraefn.swansea.linux.org.uk>
 Christoph Hellwig <hch@lst.de>
 Marc Gonzalez <marc.w.gonzalez@free.fr>

.gitignore

@@ -37,8 +37,6 @@
 *.o
 *.o.*
 *.patch
-*.rmeta
-*.rsi
 *.s
 *.so
 *.so.dbg
@@ -47,7 +45,6 @@
 *.symversions
 *.tab.[ch]
 *.tar
-*.usyms
 *.xz
 *.zst
 Module.symvers
@@ -99,7 +96,6 @@ modules.order
 !.gitattributes
 !.gitignore
 !.mailmap
-!.rustfmt.toml
 
 #
 # Generated include files
@@ -165,6 +161,3 @@ x509.genkey
 
 # Documentation toolchain
 sphinx_*/
-
-# Rust analyzer configuration
-/rust-project.json

.mailmap

@@ -10,8 +10,6 @@
 # Please keep this list dictionary sorted.
 #
 Aaron Durbin <adurbin@google.com>
-Abel Vesa <abelvesa@kernel.org> <abel.vesa@nxp.com>
-Abel Vesa <abelvesa@kernel.org> <abelvesa@gmail.com>
 Abhinav Kumar <quic_abhinavk@quicinc.com> <abhinavk@codeaurora.org>
 Adam Oldham <oldhamca@gmail.com>
 Adam Radford <aradford@gmail.com>
@@ -47,7 +45,6 @@ Andrey Konovalov <andreyknvl@gmail.com> <andreyknvl@google.com>
 Andrey Ryabinin <ryabinin.a.a@gmail.com> <a.ryabinin@samsung.com>
 Andrey Ryabinin <ryabinin.a.a@gmail.com> <aryabinin@virtuozzo.com>
 Andrzej Hajda <andrzej.hajda@intel.com> <a.hajda@samsung.com>
-André Almeida <andrealmeid@igalia.com> <andrealmeid@collabora.com>
 Andy Adamson <andros@citi.umich.edu>
 Antoine Tenart <atenart@kernel.org> <antoine.tenart@bootlin.com>
 Antoine Tenart <atenart@kernel.org> <antoine.tenart@free-electrons.com>
@@ -60,20 +57,10 @@ Arnd Bergmann <arnd@arndb.de>
 Atish Patra <atishp@atishpatra.org> <atish.patra@wdc.com>
 Axel Dyks <xl@xlsigned.net>
 Axel Lin <axel.lin@gmail.com>
-Baolin Wang <baolin.wang@linux.alibaba.com> <baolin.wang@linaro.org>
-Baolin Wang <baolin.wang@linux.alibaba.com> <baolin.wang@spreadtrum.com>
-Baolin Wang <baolin.wang@linux.alibaba.com> <baolin.wang@unisoc.com>
-Baolin Wang <baolin.wang@linux.alibaba.com> <baolin.wang7@gmail.com>
 Bart Van Assche <bvanassche@acm.org> <bart.vanassche@sandisk.com>
 Bart Van Assche <bvanassche@acm.org> <bart.vanassche@wdc.com>
 Ben Gardner <bgardner@wabtec.com>
 Ben M Cahill <ben.m.cahill@intel.com>
-Ben Widawsky <bwidawsk@kernel.org> <ben@bwidawsk.net>
-Ben Widawsky <bwidawsk@kernel.org> <ben.widawsky@intel.com>
-Ben Widawsky <bwidawsk@kernel.org> <benjamin.widawsky@intel.com>
-Bjorn Andersson <andersson@kernel.org> <bjorn@kryo.se>
-Bjorn Andersson <andersson@kernel.org> <bjorn.andersson@linaro.org>
-Bjorn Andersson <andersson@kernel.org> <bjorn.andersson@sonymobile.com>
 Björn Steinbrink <B.Steinbrink@gmx.de>
 Björn Töpel <bjorn@kernel.org> <bjorn.topel@gmail.com>
 Björn Töpel <bjorn@kernel.org> <bjorn.topel@intel.com>
@@ -81,7 +68,6 @@ Boris Brezillon <bbrezillon@kernel.org> <b.brezillon.dev@gmail.com>
 Boris Brezillon <bbrezillon@kernel.org> <b.brezillon@overkiz.com>
 Boris Brezillon <bbrezillon@kernel.org> <boris.brezillon@bootlin.com>
 Boris Brezillon <bbrezillon@kernel.org> <boris.brezillon@free-electrons.com>
-Brendan Higgins <brendan.higgins@linux.dev> <brendanhiggins@google.com>
 Brian Avery <b.avery@hp.com>
 Brian King <brking@us.ibm.com>
 Brian Silverman <bsilver16384@gmail.com> <brian.silverman@bluerivertech.com>
@@ -98,13 +84,12 @@ Christian Borntraeger <borntraeger@linux.ibm.com> <borntrae@de.ibm.com>
 Christian Brauner <brauner@kernel.org> <christian@brauner.io>
 Christian Brauner <brauner@kernel.org> <christian.brauner@canonical.com>
 Christian Brauner <brauner@kernel.org> <christian.brauner@ubuntu.com>
-Christian Marangi <ansuelsmth@gmail.com>
 Christophe Ricard <christophe.ricard@gmail.com>
 Christoph Hellwig <hch@lst.de>
-Colin Ian King <colin.i.king@gmail.com> <colin.king@canonical.com>
+Colin Ian King <colin.king@intel.com> <colin.king@canonical.com>
+Colin Ian King <colin.king@intel.com> <colin.i.king@gmail.com>
 Corey Minyard <minyard@acm.org>
 Damian Hobson-Garcia <dhobsong@igel.co.jp>
-Dan Carpenter <error27@gmail.com> <dan.carpenter@oracle.com>
 Daniel Borkmann <daniel@iogearbox.net> <danborkmann@googlemail.com>
 Daniel Borkmann <daniel@iogearbox.net> <danborkmann@iogearbox.net>
 Daniel Borkmann <daniel@iogearbox.net> <daniel.borkmann@tik.ee.ethz.ch>
@@ -138,14 +123,11 @@ Filipe Lautert <filipe@icewall.org>
 Finn Thain <fthain@linux-m68k.org> <fthain@telegraphics.com.au>
 Franck Bui-Huu <vagabon.xyz@gmail.com>
 Frank Rowand <frowand.list@gmail.com> <frank.rowand@am.sony.com>
-Frank Rowand <frowand.list@gmail.com> <frank.rowand@sony.com>
 Frank Rowand <frowand.list@gmail.com> <frank.rowand@sonymobile.com>
 Frank Rowand <frowand.list@gmail.com> <frowand@mvista.com>
 Frank Zago <fzago@systemfabricworks.com>
 Gao Xiang <xiang@kernel.org> <gaoxiang25@huawei.com>
 Gao Xiang <xiang@kernel.org> <hsiangkao@aol.com>
-Gao Xiang <xiang@kernel.org> <hsiangkao@linux.alibaba.com>
-Gao Xiang <xiang@kernel.org> <hsiangkao@redhat.com>
 Gerald Schaefer <gerald.schaefer@linux.ibm.com> <geraldsc@de.ibm.com>
 Gerald Schaefer <gerald.schaefer@linux.ibm.com> <gerald.schaefer@de.ibm.com>
 Gerald Schaefer <gerald.schaefer@linux.ibm.com> <geraldsc@linux.vnet.ibm.com>
@@ -154,8 +136,6 @@ Greg Kroah-Hartman <gregkh@suse.de>
 Greg Kroah-Hartman <greg@kroah.com>
 Greg Kurz <groug@kaod.org> <gkurz@linux.vnet.ibm.com>
 Gregory CLEMENT <gregory.clement@bootlin.com> <gregory.clement@free-electrons.com>
-Guilherme G. Piccoli <kernel@gpiccoli.net> <gpiccoli@linux.vnet.ibm.com>
-Guilherme G. Piccoli <kernel@gpiccoli.net> <gpiccoli@canonical.com>
 Guo Ren <guoren@kernel.org> <guoren@linux.alibaba.com>
 Guo Ren <guoren@kernel.org> <ren_guo@c-sky.com>
 Gustavo Padovan <gustavo@las.ic.unicamp.br>
@@ -184,7 +164,6 @@ Jan Glauber <jan.glauber@gmail.com> <jang@de.ibm.com>
 Jan Glauber <jan.glauber@gmail.com> <jang@linux.vnet.ibm.com>
 Jan Glauber <jan.glauber@gmail.com> <jglauber@cavium.com>
 Jarkko Sakkinen <jarkko@kernel.org> <jarkko.sakkinen@linux.intel.com>
-Jarkko Sakkinen <jarkko@kernel.org> <jarkko@profian.com>
 Jason Gunthorpe <jgg@ziepe.ca> <jgg@mellanox.com>
 Jason Gunthorpe <jgg@ziepe.ca> <jgg@nvidia.com>
 Jason Gunthorpe <jgg@ziepe.ca> <jgunthorpe@obsidianresearch.com>
@@ -221,13 +200,10 @@ Jordan Crouse <jordan@cosmicpenguin.net> <jcrouse@codeaurora.org>
 <josh@joshtriplett.org> <josht@linux.vnet.ibm.com>
 <josh@joshtriplett.org> <josht@us.ibm.com>
 <josh@joshtriplett.org> <josht@vnet.ibm.com>
-Josh Poimboeuf <jpoimboe@kernel.org> <jpoimboe@redhat.com>
-Josh Poimboeuf <jpoimboe@kernel.org> <jpoimboe@us.ibm.com>
 Juha Yrjola <at solidboot.com>
 Juha Yrjola <juha.yrjola@nokia.com>
 Juha Yrjola <juha.yrjola@solidboot.com>
 Julien Thierry <julien.thierry.kdev@gmail.com> <julien.thierry@arm.com>
-Kalle Valo <kvalo@kernel.org> <kvalo@codeaurora.org>
 Kalyan Thota <quic_kalyant@quicinc.com> <kalyan_t@codeaurora.org>
 Kay Sievers <kay.sievers@vrfy.org>
 Kees Cook <keescook@chromium.org> <kees.cook@canonical.com>
@@ -237,7 +213,7 @@ Kees Cook <keescook@chromium.org> <kees@ubuntu.com>
 Keith Busch <kbusch@kernel.org> <keith.busch@intel.com>
 Keith Busch <kbusch@kernel.org> <keith.busch@linux.intel.com>
 Kenneth W Chen <kenneth.w.chen@intel.com>
-Kirill Tkhai <tkhai@ya.ru> <ktkhai@virtuozzo.com>
+Kirill Tkhai <kirill.tkhai@openvz.org> <ktkhai@virtuozzo.com>
 Konstantin Khlebnikov <koct9i@gmail.com> <khlebnikov@yandex-team.ru>
 Konstantin Khlebnikov <koct9i@gmail.com> <k.khlebnikov@samsung.com>
 Koushik <raghavendra.koushik@neterion.com>
@@ -258,8 +234,6 @@ Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@web.de>
 <linux-hardening@vger.kernel.org> <kernel-hardening@lists.openwall.com>
 Li Yang <leoyang.li@nxp.com> <leoli@freescale.com>
 Li Yang <leoyang.li@nxp.com> <leo@zh-kernel.org>
-Lorenzo Pieralisi <lpieralisi@kernel.org> <lorenzo.pieralisi@arm.com>
-Luca Ceresoli <luca.ceresoli@bootlin.com> <luca@lucaceresoli.net>
 Lukasz Luba <lukasz.luba@arm.com> <l.luba@partner.samsung.com>
 Maciej W. Rozycki <macro@mips.com> <macro@imgtec.com>
 Maciej W. Rozycki <macro@orcam.me.uk> <macro@linux-mips.org>
@@ -275,7 +249,6 @@ Mark Yao <markyao0591@gmail.com> <mark.yao@rock-chips.com>
 Martin Kepplinger <martink@posteo.de> <martin.kepplinger@ginzinger.com>
 Martin Kepplinger <martink@posteo.de> <martin.kepplinger@puri.sm>
 Martin Kepplinger <martink@posteo.de> <martin.kepplinger@theobroma-systems.com>
-Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> <martyna.szapar-mudlaw@intel.com>
 Mathieu Othacehe <m.othacehe@gmail.com>
 Matthew Wilcox <willy@infradead.org> <matthew.r.wilcox@intel.com>
 Matthew Wilcox <willy@infradead.org> <matthew@wil.cx>
@@ -320,7 +293,6 @@ Morten Welinder <welinder@troll.com>
 Mythri P K <mythripk@ti.com>
 Nadia Yvette Chambers <nyc@holomorphy.com> William Lee Irwin III <wli@holomorphy.com>
 Nathan Chancellor <nathan@kernel.org> <natechancellor@gmail.com>
-Neil Armstrong <neil.armstrong@linaro.org> <narmstrong@baylibre.com>
 Nguyen Anh Quynh <aquynh@gmail.com>
 Nicholas Piggin <npiggin@gmail.com> <npiggen@suse.de>
 Nicholas Piggin <npiggin@gmail.com> <npiggin@kernel.dk>
@@ -338,7 +310,6 @@ Oleksij Rempel <linux@rempel-privat.de> <external.Oleksij.Rempel@de.bosch.com>
 Oleksij Rempel <linux@rempel-privat.de> <fixed-term.Oleksij.Rempel@de.bosch.com>
 Oleksij Rempel <linux@rempel-privat.de> <o.rempel@pengutronix.de>
 Oleksij Rempel <linux@rempel-privat.de> <ore@pengutronix.de>
-Oliver Upton <oliver.upton@linux.dev> <oupton@google.com>
 Pali Rohár <pali@kernel.org> <pali.rohar@gmail.com>
 Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
 Patrick Mochel <mochel@digitalimplant.org>
@@ -354,8 +325,7 @@ Peter Oruba <peter@oruba.de>
 Pratyush Anand <pratyush.anand@gmail.com> <pratyush.anand@st.com>
 Praveen BP <praveenbp@ti.com>
 Punit Agrawal <punitagrawal@gmail.com> <punit.agrawal@arm.com>
-Qais Yousef <qyousef@layalina.io> <qais.yousef@imgtec.com>
-Qais Yousef <qyousef@layalina.io> <qais.yousef@arm.com>
+Qais Yousef <qsyousef@gmail.com> <qais.yousef@imgtec.com>
 Quentin Monnet <quentin@isovalent.com> <quentin.monnet@netronome.com>
 Quentin Perret <qperret@qperret.net> <quentin.perret@arm.com>
 Rafael J. Wysocki <rjw@rjwysocki.net> <rjw@sisk.pl>
@@ -388,7 +358,6 @@ Sean Nyekjaer <sean@geanix.com> <sean.nyekjaer@prevas.dk>
 Sebastian Reichel <sre@kernel.org> <sebastian.reichel@collabora.co.uk>
 Sebastian Reichel <sre@kernel.org> <sre@debian.org>
 Sedat Dilek <sedat.dilek@gmail.com> <sedat.dilek@credativ.de>
-Seth Forshee <sforshee@kernel.org> <seth.forshee@canonical.com>
 Shiraz Hashim <shiraz.linux.kernel@gmail.com> <shiraz.hashim@st.com>
 Shuah Khan <shuah@kernel.org> <shuahkhan@gmail.com>
 Shuah Khan <shuah@kernel.org> <shuah.khan@hp.com>
@@ -426,7 +395,6 @@ Vasily Averin <vasily.averin@linux.dev> <vvs@virtuozzo.com>
 Vasily Averin <vasily.averin@linux.dev> <vvs@openvz.org>
 Vasily Averin <vasily.averin@linux.dev> <vvs@parallels.com>
 Vasily Averin <vasily.averin@linux.dev> <vvs@sw.ru>
-Valentin Schneider <vschneid@redhat.com> <valentin.schneider@arm.com>
 Vinod Koul <vkoul@kernel.org> <vinod.koul@intel.com>
 Vinod Koul <vkoul@kernel.org> <vinod.koul@linux.intel.com>
 Vinod Koul <vkoul@kernel.org> <vkoul@infradead.org>

.rustfmt.toml

@@ -1,12 +0,0 @@
-edition = "2021"
-newline_style = "Unix"
-
-# Unstable options that help catching some mistakes in formatting and that we may want to enable
-# when they become stable.
-#
-# They are kept here since they are useful to run from time to time.
-#format_code_in_doc_comments = true
-#reorder_impl_items = true
-#comment_width = 100
-#wrap_comments = true
-#normalize_comments = true

CREDITS

@@ -627,10 +627,6 @@ S: 48287 Sawleaf
 S: Fremont, California 94539
 S: USA
 
-N: Tomas Cech
-E: sleep_walker@suse.com
-D: arm/palm treo support
-
 N: Florent Chabaud
 E: florent.chabaud@polytechnique.org
 D: software suspend
@@ -3495,10 +3491,6 @@ D: wd33c93 SCSI driver (linux-m68k)
 S: San Jose, California
 S: USA
 
-N: Joonyoung Shim
-E: y0922.shim@samsung.com
-D: Samsung Exynos DRM drivers
-
 N: Robert Siemer
 E: Robert.Siemer@gmx.de
 P: 2048/C99A4289 2F DC 17 2E 56 62 01 C8  3D F2 AC 09 F2 E5 DD EE

Documentation/ABI/stable/sysfs-block

@@ -260,15 +260,6 @@ Description:
 		for discards, and don't read this file.
 
 
-What:		/sys/block/<disk>/queue/dma_alignment
-Date:		May 2022
-Contact:	linux-block@vger.kernel.org
-Description:
-		Reports the alignment that user space addresses must have to be
-		used for raw block device access with O_DIRECT and other driver
-		specific passthrough mechanisms.
-
-
 What:		/sys/block/<disk>/queue/fua
 Date:		May 2018
 Contact:	linux-block@vger.kernel.org

Documentation/ABI/stable/sysfs-bus-mhi

@@ -19,13 +19,3 @@ Description:	The file holds the OEM PK Hash value of the endpoint device
 		read without having the device power on at least once, the file
 		will read all 0's.
 Users:		Any userspace application or clients interested in device info.
-
-What:           /sys/bus/mhi/devices/.../soc_reset
-Date:           April 2022
-KernelVersion:  5.19
-Contact:        mhi@lists.linux.dev
-Description:	Initiates a SoC reset on the MHI controller.  A SoC reset is
-                a reset of last resort, and will require a complete re-init.
-                This can be useful as a method of recovery if the device is
-                non-responsive, or as a means of loading new firmware as a
-                system administration task.

Documentation/ABI/stable/sysfs-driver-dma-idxd

@@ -227,17 +227,6 @@ Contact:	dmaengine@vger.kernel.org
 Description:	Indicate the number of retires for an enqcmds submission on a sharedwq.
 		A max value to set attribute is capped at 64.
 
-What:		/sys/bus/dsa/devices/wq<m>.<n>/op_config
-Date:		Sept 14, 2022
-KernelVersion:	6.0.0
-Contact:	dmaengine@vger.kernel.org
-Description:	Shows the operation capability bits displayed in bitmap format
-		presented by %*pb printk() output format specifier.
-		The attribute can be configured when the WQ is disabled in
-		order to configure the WQ to accept specific bits that
-		correlates to the operations allowed. It's visible only
-		on platforms that support the capability.
-
 What:           /sys/bus/dsa/devices/engine<m>.<n>/group_id
 Date:           Oct 25, 2019
 KernelVersion:  5.6.0
@@ -266,27 +255,3 @@ Contact:	dmaengine@vger.kernel.org
 Description:	Indicates the number of Read Buffers reserved for the use of
 		engines in the group. See DSA spec v1.2 9.2.18 GRPCFG Read Buffers
 		Reserved.
-
-What:		/sys/bus/dsa/devices/group<m>.<n>/desc_progress_limit
-Date:		Sept 14, 2022
-KernelVersion:	6.0.0
-Contact:	dmaengine@vger.kernel.org
-Description:	Allows control of the number of work descriptors that can be
-		concurrently processed by an engine in the group as a fraction
-		of the Maximum Work Descriptors in Progress value specified in
-		the ENGCAP register. The acceptable values are 0 (default),
-		1 (1/2 of max value), 2 (1/4 of the max value), and 3 (1/8 of
-		the max value). It's visible only on platforms that support
-		the capability.
-
-What:		/sys/bus/dsa/devices/group<m>.<n>/batch_progress_limit
-Date:		Sept 14, 2022
-KernelVersion:	6.0.0
-Contact:	dmaengine@vger.kernel.org
-Description:	Allows control of the number of batch descriptors that can be
-		concurrently processed by an engine in the group as a fraction
-		of the Maximum Batch Descriptors in Progress value specified in
-		the ENGCAP register. The acceptable values are 0 (default),
-		1 (1/2 of max value), 2 (1/4 of the max value), and 3 (1/8 of
-		the max value). It's visible only on platforms that support
-		the capability.

Documentation/ABI/stable/sysfs-driver-mlxreg-io

@@ -1,7 +1,7 @@
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_health
 Date:		June 2018
 KernelVersion:	4.19
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	This file shows ASIC health status. The possible values are:
 		0 - health failed, 2 - health OK, 3 - ASIC in booting state.
 
@@ -11,7 +11,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version
 Date:		June 2018
 KernelVersion:	4.19
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show with which CPLD versions have been burned
 		on carrier and switch boards.
 
@@ -20,7 +20,7 @@ Description:	These files show with which CPLD versions have been burned
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/fan_dir
 Date:		December 2018
 KernelVersion:	5.0
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	This file shows the system fans direction:
 		forward direction - relevant bit is set 0;
 		reversed direction - relevant bit is set 1.
@@ -30,7 +30,7 @@ Description:	This file shows the system fans direction:
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version
 Date:		November 2018
 KernelVersion:	5.0
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show with which CPLD versions have been burned
 		on LED or Gearbox board.
 
@@ -39,7 +39,7 @@ Description:	These files show with which CPLD versions have been burned
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable
 Date:		November 2018
 KernelVersion:	5.0
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files enable and disable the access to the JTAG domain.
 		By default access to the JTAG domain is disabled.
 
@@ -48,7 +48,7 @@ Description:	These files enable and disable the access to the JTAG domain.
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio
 Date:		June 2018
 KernelVersion:	4.19
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	This file allows iio devices selection.
 
 		Attribute select_iio can be written with 0 or with 1. It
@@ -62,7 +62,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu1_on
 		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_down
 Date:		June 2018
 KernelVersion:	4.19
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files allow asserting system power cycling, switching
 		power supply units on and off and system's main power domain
 		shutdown.
@@ -89,7 +89,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_short_pb
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_reset
 Date:		June 2018
 KernelVersion:	4.19
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show the system reset cause, as following: power
 		auxiliary outage or power refresh, ASIC thermal shutdown, halt,
 		hotswap, watchdog, firmware reset, long press power button,
@@ -106,7 +106,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_system
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_voltmon_upgrade_fail
 Date:		November 2018
 KernelVersion:	5.0
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show the system reset cause, as following: ComEx
 		power fail, reset from ComEx, system platform reset, reset
 		due to voltage monitor devices upgrade failure,
@@ -119,7 +119,7 @@ Description:	These files show the system reset cause, as following: ComEx
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version
 Date:		November 2018
 KernelVersion:	5.0
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show with which CPLD versions have been burned
 		on LED board.
 
@@ -133,7 +133,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd
 Date:		June 2019
 KernelVersion:	5.3
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show the system reset cause, as following:
 		COMEX thermal shutdown; wathchdog power off or reset was derived
 		by one of the next components: COMEX, switch board or by Small Form
@@ -148,7 +148,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config1
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config2
 Date:		January 2020
 KernelVersion:	5.6
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show system static topology identification
 		like system's static I2C topology, number and type of FPGA
 		devices within the system and so on.
@@ -161,7 +161,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_soc
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_pwr_off
 Date:		January 2020
 KernelVersion:	5.6
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show the system reset causes, as following: reset
 		due to AC power failure, reset invoked from software by
 		assertion reset signal through CPLD. reset caused by signal
@@ -173,7 +173,7 @@ Description:	These files show the system reset causes, as following: reset
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pcie_asic_reset_dis
 Date:		January 2020
 KernelVersion:	5.6
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	This file allows to retain ASIC up during PCIe root complex
 		reset, when attribute is set 1.
 
@@ -182,7 +182,7 @@ Description:	This file allows to retain ASIC up during PCIe root complex
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/vpd_wp
 Date:		January 2020
 KernelVersion:	5.6
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	This file allows to overwrite system VPD hardware write
 		protection when attribute is set 1.
 
@@ -191,7 +191,7 @@ Description:	This file allows to overwrite system VPD hardware write
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/voltreg_update_status
 Date:		January 2020
 KernelVersion:	5.6
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	This file exposes the configuration update status of burnable
 		voltage regulator devices. The status values are as following:
 		0 - OK; 1 - CRC failure; 2 = I2C failure; 3 - in progress.
@@ -201,7 +201,7 @@ Description:	This file exposes the configuration update status of burnable
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ufm_version
 Date:		January 2020
 KernelVersion:	5.6
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	This file exposes the firmware version of burnable voltage
 		regulator devices.
 
@@ -217,7 +217,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version_min
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version_min
 Date:		July 2020
 KernelVersion:	5.9
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show with which CPLD part numbers and minor
 		versions have been burned CPLD devices equipped on a
 		system.
@@ -467,78 +467,3 @@ Description:	These files provide the maximum powered required for line card
 		feeding and line card configuration Id.
 
 		The files are read only.
-
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/phy_reset
-Date:		May 2022
-KernelVersion:	5.19
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
-Description:	This file allows to reset PHY 88E1548 when attribute is set 0
-		due to some abnormal PHY behavior.
-		Expected behavior:
-		When phy_reset is written 1, all PHY 88E1548 are released
-		from the reset state, when 0 - are hold in reset state.
-
-		The files are read/write.
-
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/mac_reset
-Date:		May 2022
-KernelVersion:	5.19
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
-Description:	This file allows to reset ASIC MT52132 when attribute is set 0
-		due to some abnormal ASIC behavior.
-		Expected behavior:
-		When mac_reset is written 1, the ASIC MT52132 is released
-		from the reset state, when 0 - is hold in reset state.
-
-		The files are read/write.
-
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/qsfp_pwr_good
-Date:		May 2022
-KernelVersion:	5.19
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
-Description:	This file shows QSFP ports power status. The value is set to 0
-		when one of any QSFP ports is plugged. The value is set to 1 when
-		there are no any QSFP ports are plugged.
-		The possible values are:
-		0 - Power good, 1 - Not power good.
-
-		The files are read only.
-
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic2_health
-Date:		July 2022
-KernelVersion:	5.20
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
-Description:	This file shows 2-nd ASIC health status. The possible values are:
-		0 - health failed, 2 - health OK, 3 - ASIC in booting state.
-
-		The file is read only.
-
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_reset
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic2_reset
-Date:		July 2022
-KernelVersion:	5.20
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
-Description:	These files allow to each of ASICs by writing 1.
-
-		The files are write only.
-
-
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/comm_chnl_ready
-Date:		July 2022
-KernelVersion:	5.20
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
-Description:	This file is used to indicate remote end (for example BMC) that system
-	        host CPU is ready for sending telemetry data to remote end.
-		For indication the file should be written 1.
-
-		The file is write only.
-
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config3
-Date:		January 2020
-KernelVersion:	5.6
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
-Description:	The file indicates COME module hardware configuration.
-		The value is pushed by hardware through GPIO pins.
-		The purpose is to expose some minor BOM changes for the same system SKU.
-
-		The file is read only.

Documentation/ABI/stable/sysfs-module

@@ -38,7 +38,7 @@ What:		/sys/module/<MODULENAME>/srcversion
 Date:		Jun 2005
 Description:
 		If the module source has MODULE_VERSION, this file will contain
-		the checksum of the source code.
+		the checksum of the the source code.
 
 What:		/sys/module/<MODULENAME>/version
 Date:		Jun 2005

Documentation/ABI/testing/configfs-usb-gadget-mass-storage

@@ -19,7 +19,7 @@ KernelVersion:	3.13
 Description:
 		The attributes:
 
-		============	==============================================
+		===========	==============================================
 		file		The path to the backing file for the LUN.
 				Required if LUN is not marked as removable.
 		ro		Flag specifying access to the LUN shall be
@@ -32,10 +32,4 @@ Description:
 				being a CD-ROM.
 		nofua		Flag specifying that FUA flag
 				in SCSI WRITE(10,12)
-		forced_eject	This write-only file is useful only when
-				the function is active. It causes the backing
-				file to be forcibly detached from the LUN,
-				regardless of whether the host has allowed it.
-				Any non-zero number of bytes written will
-				result in ejection.
-		============	==============================================
+		===========	==============================================

Documentation/ABI/testing/configfs-usb-gadget-uvc

@@ -7,7 +7,6 @@ Description:	UVC function directory
 		streaming_maxburst	0..15 (ss only)
 		streaming_maxpacket	1..1023 (fs), 1..3072 (hs/ss)
 		streaming_interval	1..16
-		function_name		string [32]
 		===================	=============================
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/control

Documentation/ABI/testing/debugfs-cros-ec

@@ -54,25 +54,3 @@ Description:
 		this feature.
 
 		Output will be in the format: "0x%08x\n".
-
-What:		/sys/kernel/debug/<cros-ec-device>/suspend_timeout_ms
-Date:		August 2022
-KernelVersion:	6.1
-Description:
-		Some ECs have a feature where they will track transitions of
-		a hardware-controlled sleep line, such as Intel's SLP_S0 line,
-		in order to detect cases where a system failed to go into deep
-		sleep states. The suspend_timeout_ms file controls the amount of
-		time in milliseconds the EC will wait before declaring a sleep
-		timeout event and attempting to wake the system.
-
-		Supply 0 to use the default value coded into EC firmware. Supply
-		65535 (EC_HOST_SLEEP_TIMEOUT_INFINITE) to disable the EC sleep
-		failure detection mechanism. Values in between 0 and 65535
-		indicate the number of milliseconds the EC should wait after a
-		sleep transition before declaring a timeout. This includes both
-		the duration after a sleep command was received but before the
-		hardware line changed, as well as the duration between when the
-		hardware line changed and the kernel sent an EC resume command.
-
-		Output will be in the format: "%u\n".

Documentation/ABI/testing/debugfs-driver-habanalabs

@@ -101,15 +101,6 @@ Description:    Specify the size of the DMA transaction when using DMA to read
                 When the write is finished, the user can read the "data_dma"
                 blob
 
-What:           /sys/kernel/debug/habanalabs/hl<n>/dump_razwi_events
-Date:           Aug 2022
-KernelVersion:  5.20
-Contact:        fkassabri@habana.ai
-Description:    Dumps all razwi events to dmesg if exist.
-                After reading the status register of an existing event
-                the routine will clear the status register.
-                Usage: cat dump_razwi_events
-
 What:           /sys/kernel/debug/habanalabs/hl<n>/dump_security_violations
 Date:           Jan 2021
 KernelVersion:  5.12
@@ -130,16 +121,14 @@ Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
 Description:    Sets I2C device address for I2C transaction that is generated
-                by the device's CPU, Not available when device is loaded with secured
-                firmware
+                by the device's CPU
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_bus
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
 Description:    Sets I2C bus address for I2C transaction that is generated by
-                the device's CPU, Not available when device is loaded with secured
-                firmware
+                the device's CPU
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_data
 Date:           Jan 2019
@@ -147,60 +136,39 @@ KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
 Description:    Triggers an I2C transaction that is generated by the device's
                 CPU. Writing to this file generates a write transaction while
-                reading from the file generates a read transaction, Not available
-                when device is loaded with secured firmware
+                reading from the file generates a read transaction
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_len
 Date:           Dec 2021
 KernelVersion:  5.17
 Contact:        obitton@habana.ai
 Description:    Sets I2C length in bytes for I2C transaction that is generated by
-                the device's CPU, Not available when device is loaded with secured
-                firmware
+                the device's CPU
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_reg
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
 Description:    Sets I2C register id for I2C transaction that is generated by
-                the device's CPU, Not available when device is loaded with secured
-                firmware
+                the device's CPU
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/led0
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
-Description:    Sets the state of the first S/W led on the device, Not available
-                when device is loaded with secured firmware
+Description:    Sets the state of the first S/W led on the device
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/led1
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
-Description:    Sets the state of the second S/W led on the device, Not available
-                when device is loaded with secured firmware
+Description:    Sets the state of the second S/W led on the device
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/led2
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
-Description:    Sets the state of the third S/W led on the device, Not available
-                when device is loaded with secured firmware
-
-What:           /sys/kernel/debug/habanalabs/hl<n>/memory_scrub
-Date:           May 2022
-KernelVersion:  5.19
-Contact:        dhirschfeld@habana.ai
-Description:    Allows the root user to scrub the dram memory. The scrubbing
-                value can be set using the debugfs file memory_scrub_val.
-
-What:           /sys/kernel/debug/habanalabs/hl<n>/memory_scrub_val
-Date:           May 2022
-KernelVersion:  5.19
-Contact:        dhirschfeld@habana.ai
-Description:    The value to which the dram will be set to when the user
-                scrubs the dram using 'memory_scrub' debugfs file and
-                the scrubbing value when using module param 'memory_scrub'
+Description:    Sets the state of the third S/W led on the device
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/mmu
 Date:           Jan 2019
@@ -222,30 +190,6 @@ Description:    Check and display page fault or access violation mmu errors for
                 echo "0x200" > /sys/kernel/debug/habanalabs/hl0/mmu_error
                 cat /sys/kernel/debug/habanalabs/hl0/mmu_error
 
-What:           /sys/kernel/debug/habanalabs/hl<n>/monitor_dump
-Date:           Mar 2022
-KernelVersion:  5.19
-Contact:        osharabi@habana.ai
-Description:    Allows the root user to dump monitors status from the device's
-                protected config space.
-                This property is a binary blob that contains the result of the
-                monitors registers dump.
-                This custom interface is needed (instead of using the generic
-                Linux user-space PCI mapping) because this space is protected
-                and cannot be accessed using PCI read.
-                This interface doesn't support concurrency in the same device.
-                Only supported on GAUDI.
-
-What:           /sys/kernel/debug/habanalabs/hl<n>/monitor_dump_trig
-Date:           Mar 2022
-KernelVersion:  5.19
-Contact:        osharabi@habana.ai
-Description:    Triggers dump of monitor data. The value to trigger the operation
-                must be 1. Triggering the monitor dump operation initiates dump of
-                current registers values of all monitors.
-                When the write is finished, the user can read the "monitor_dump"
-                blob
-
 What:           /sys/kernel/debug/habanalabs/hl<n>/set_power_state
 Date:           Jan 2019
 KernelVersion:  5.1
@@ -295,7 +239,7 @@ Description:    Displays a list with information about the currently user
                 to DMA addresses
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/userptr_lookup
-Date:           Oct 2021
+Date:           Aug 2021
 KernelVersion:  5.15
 Contact:        ogabbay@kernel.org
 Description:    Allows to search for specific user pointers (user virtual

Documentation/ABI/testing/debugfs-hisi-hpre

@@ -104,20 +104,6 @@ Description:	Dump the status of the QM.
 		Four states: initiated, started, stopped and closed.
 		Available for both PF and VF, and take no other effect on HPRE.
 
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/diff_regs
-Date:		Mar 2022
-Contact:	linux-crypto@vger.kernel.org
-Description:	QM debug registers(regs) read hardware register value. This
-		node is used to show the change of the qm register values. This
-		node can be help users to check the change of register values.
-
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/diff_regs
-Date:		Mar 2022
-Contact:	linux-crypto@vger.kernel.org
-Description:	HPRE debug registers(regs) read hardware register value. This
-		node is used to show the change of the register values. This
-		node can be help users to check the change of register values.
-
 What:		/sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_cnt
 Date:		Apr 2020
 Contact:	linux-crypto@vger.kernel.org

Documentation/ABI/testing/debugfs-hisi-sec

@@ -84,20 +84,6 @@ Description:	Dump the status of the QM.
 		Four states: initiated, started, stopped and closed.
 		Available for both PF and VF, and take no other effect on SEC.
 
-What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/diff_regs
-Date:		Mar 2022
-Contact:	linux-crypto@vger.kernel.org
-Description:	QM debug registers(regs) read hardware register value. This
-		node is used to show the change of the qm register values. This
-		node can be help users to check the change of register values.
-
-What:		/sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/diff_regs
-Date:		Mar 2022
-Contact:	linux-crypto@vger.kernel.org
-Description:	SEC debug registers(regs) read hardware register value. This
-		node is used to show the change of the register values. This
-		node can be help users to check the change of register values.
-
 What:		/sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/send_cnt
 Date:		Apr 2020
 Contact:	linux-crypto@vger.kernel.org

Documentation/ABI/testing/debugfs-hisi-zip

@@ -97,20 +97,6 @@ Description:	Dump the status of the QM.
 		Four states: initiated, started, stopped and closed.
 		Available for both PF and VF, and take no other effect on ZIP.
 
-What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/diff_regs
-Date:		Mar 2022
-Contact:	linux-crypto@vger.kernel.org
-Description:	QM debug registers(regs) read hardware register value. This
-		node is used to show the change of the qm registers value. This
-		node can be help users to check the change of register values.
-
-What:		/sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/diff_regs
-Date:		Mar 2022
-Contact:	linux-crypto@vger.kernel.org
-Description:	ZIP debug registers(regs) read hardware register value. This
-		node is used to show the change of the registers value. this
-		node can be help users to check the change of register values.
-
 What:		/sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/send_cnt
 Date:		Apr 2020
 Contact:	linux-crypto@vger.kernel.org

Documentation/ABI/testing/ima_policy

@@ -27,9 +27,8 @@ Description:
 				[fowner=] [fgroup=]]
 			lsm:	[[subj_user=] [subj_role=] [subj_type=]
 				 [obj_user=] [obj_role=] [obj_type=]]
-			option:	[digest_type=] [template=] [permit_directio]
-				[appraise_type=] [appraise_flag=]
-				[appraise_algos=] [keyrings=]
+			option:	[[appraise_type=]] [template=] [permit_directio]
+				[appraise_flag=] [appraise_algos=] [keyrings=]
 		  base:
 			func:= [BPRM_CHECK][MMAP_CHECK][CREDS_CHECK][FILE_CHECK][MODULE_CHECK]
 				[FIRMWARE_CHECK]
@@ -48,21 +47,10 @@ Description:
 			fgroup:= decimal value
 		  lsm:  are LSM specific
 		  option:
-			appraise_type:= [imasig] | [imasig|modsig] | [sigv3]
-			    where 'imasig' is the original or the signature
-				format v2.
-			    where 'modsig' is an appended signature,
-			    where 'sigv3' is the signature format v3. (Currently
-				limited to fsverity digest based signatures
-				stored in security.ima xattr. Requires
-				specifying "digest_type=verity" first.)
-
+			appraise_type:= [imasig] [imasig|modsig]
 			appraise_flag:= [check_blacklist]
 			Currently, blacklist check is only for files signed with appended
 			signature.
-			digest_type:= verity
-			    Require fs-verity's file digest instead of the
-			    regular IMA file hash.
 			keyrings:= list of keyrings
 			(eg, .builtin_trusted_keys|.ima). Only valid
 			when action is "measure" and func is KEY_CHECK.
@@ -161,30 +149,3 @@ Description:
 		security.ima xattr of a file:
 
 			appraise func=SETXATTR_CHECK appraise_algos=sha256,sha384,sha512
-
-		Example of a 'measure' rule requiring fs-verity's digests
-		with indication of type of digest in the measurement list.
-
-			measure func=FILE_CHECK digest_type=verity \
-				template=ima-ngv2
-
-		Example of 'measure' and 'appraise' rules requiring fs-verity
-		signatures (format version 3) stored in security.ima xattr.
-
-		The 'measure' rule specifies the 'ima-sigv3' template option,
-		which includes the indication of type of digest and the file
-		signature in the measurement list.
-
-			measure func=BPRM_CHECK digest_type=verity \
-				template=ima-sigv3
-
-
-		The 'appraise' rule specifies the type and signature format
-		version (sigv3) required.
-
-			appraise func=BPRM_CHECK digest_type=verity \
-				appraise_type=sigv3
-
-		All of these policy rules could, for example, be constrained
-		either based on a filesystem's UUID (fsuuid) or based on LSM
-		labels.

Documentation/ABI/testing/procfs-smaps_rollup

@@ -22,7 +22,6 @@ Description:
 			MMUPageSize:           4 kB
 			Rss:		     884 kB
 			Pss:		     385 kB
-			Pss_Dirty:	      68 kB
 			Pss_Anon:	     301 kB
 			Pss_File:	      80 kB
 			Pss_Shmem:	       4 kB

Documentation/ABI/testing/securityfs-secrets-coco

@@ -1,51 +0,0 @@
-What:		security/secrets/coco
-Date:		February 2022
-Contact:	Dov Murik <dovmurik@linux.ibm.com>
-Description:
-		Exposes confidential computing (coco) EFI secrets to
-		userspace via securityfs.
-
-		EFI can declare memory area used by confidential computing
-		platforms (such as AMD SEV and SEV-ES) for secret injection by
-		the Guest Owner during VM's launch.  The secrets are encrypted
-		by the Guest Owner and decrypted inside the trusted enclave,
-		and therefore are not readable by the untrusted host.
-
-		The efi_secret module exposes the secrets to userspace.  Each
-		secret appears as a file under <securityfs>/secrets/coco,
-		where the filename is the GUID of the entry in the secrets
-		table.  This module is loaded automatically by the EFI driver
-		if the EFI secret area is populated.
-
-		Two operations are supported for the files: read and unlink.
-		Reading the file returns the content of secret entry.
-		Unlinking the file overwrites the secret data with zeroes and
-		removes the entry from the filesystem.  A secret cannot be read
-		after it has been unlinked.
-
-		For example, listing the available secrets::
-
-		  # modprobe efi_secret
-		  # ls -l /sys/kernel/security/secrets/coco
-		  -r--r----- 1 root root 0 Jun 28 11:54 736870e5-84f0-4973-92ec-06879ce3da0b
-		  -r--r----- 1 root root 0 Jun 28 11:54 83c83f7f-1356-4975-8b7e-d3a0b54312c6
-		  -r--r----- 1 root root 0 Jun 28 11:54 9553f55d-3da2-43ee-ab5d-ff17f78864d2
-		  -r--r----- 1 root root 0 Jun 28 11:54 e6f5a162-d67f-4750-a67c-5d065f2a9910
-
-		Reading the secret data by reading a file::
-
-		  # cat /sys/kernel/security/secrets/coco/e6f5a162-d67f-4750-a67c-5d065f2a9910
-		  the-content-of-the-secret-data
-
-		Wiping a secret by unlinking a file::
-
-		  # rm /sys/kernel/security/secrets/coco/e6f5a162-d67f-4750-a67c-5d065f2a9910
-		  # ls -l /sys/kernel/security/secrets/coco
-		  -r--r----- 1 root root 0 Jun 28 11:54 736870e5-84f0-4973-92ec-06879ce3da0b
-		  -r--r----- 1 root root 0 Jun 28 11:54 83c83f7f-1356-4975-8b7e-d3a0b54312c6
-		  -r--r----- 1 root root 0 Jun 28 11:54 9553f55d-3da2-43ee-ab5d-ff17f78864d2
-
-		Note: The binary format of the secrets table injected by the
-		Guest Owner is described in
-		drivers/virt/coco/efi_secret/efi_secret.c under "Structure of
-		the EFI secret area".

Documentation/ABI/testing/sysfs-amd-pmc

@@ -1,13 +0,0 @@
-What:		/sys/bus/platform/drivers/amd_pmc/*/smu_fw_version
-Date:		October 2022
-Contact:	Mario Limonciello <mario.limonciello@amd.com>
-Description:	Reading this file reports the version of the firmware loaded to
-		System Management Unit (SMU) contained in AMD CPUs and
-		APUs.
-
-What:		/sys/bus/platform/drivers/amd_pmc/*/smu_program
-Date:		October 2022
-Contact:	Mario Limonciello <mario.limonciello@amd.com>
-Description:	Reading this file reports the program corresponding to the SMU
-		firmware version.  The program field is used to disambiguate two
-		APU/CPU models that can share the same firmware binary.

Documentation/ABI/testing/sysfs-amd-pmf

@@ -1,13 +0,0 @@
-What:		/sys/devices/platform/*/cnqf_enable
-Date:		September 2022
-Contact:	Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
-Description:	Reading this file tells if the AMD Platform Management(PMF)
-		Cool n Quiet Framework(CnQF) feature is enabled or not.
-
-		This feature is not enabled by default and gets only turned on
-		if OEM BIOS passes a "flag" to PMF ACPI function (index 11 or 12)
-		or in case the user writes "on".
-
-		To turn off CnQF user can write "off" to the sysfs node.
-		Note: Systems that support auto mode will not have this sysfs file
-		available.

Documentation/ABI/testing/sysfs-ata

@@ -107,14 +107,13 @@ Description:
 				described in ATA8 7.16 and 7.17. Only valid if
 				the device is not a PM.
 
-		pio_mode:	(RO) PIO transfer mode used by the device.
-				Mostly used by PATA devices.
+		pio_mode:	(RO) Transfer modes supported by the device when
+				in PIO mode. Mostly used by PATA device.
 
-		xfer_mode:	(RO) Current transfer mode. Mostly used by
-				PATA devices.
+		xfer_mode:	(RO) Current transfer mode
 
-		dma_mode:	(RO) DMA transfer mode used by the device.
-				Mostly used by PATA devices.
+		dma_mode:	(RO) Transfer modes supported by the device when
+				in DMA mode. Mostly used by PATA device.
 
 		class:		(RO) Device class. Can be "ata" for disk,
 				"atapi" for packet device, "pmp" for PM, or

Documentation/ABI/testing/sysfs-bus-bcma

@@ -3,7 +3,7 @@ Date:		May 2011
 KernelVersion:	3.0
 Contact:	Rafał Miłecki <zajec5@gmail.com>
 Description:
-		Each BCMA core has its manufacturer id. See
+		Each BCMA core has it's manufacturer id. See
 		include/linux/bcma/bcma.h for possible values.
 
 What:		/sys/bus/bcma/devices/.../id

Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x

@@ -516,11 +516,3 @@ Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(Read) Returns the number of special conditional P1 right-hand keys
 		that the trace unit can use (0x194).  The value is taken
 		directly from the HW.
-
-What:		/sys/bus/coresight/devices/etm<N>/ts_source
-Date:		October 2022
-KernelVersion:	6.1
-Contact:	Mathieu Poirier <mathieu.poirier@linaro.org> or Suzuki K Poulose <suzuki.poulose@arm.com>
-Description:	(Read) When FEAT_TRF is implemented, value of TRFCR_ELx.TS used for
-		trace session. Otherwise -1 indicates an unknown time source. Check
-		trcidr0.tssize to see if a global timestamp is available.

Documentation/ABI/testing/sysfs-bus-counter

@@ -4,12 +4,6 @@ Contact:	linux-iio@vger.kernel.org
 Description:
 		Count data of Count Y represented as a string.
 
-What:		/sys/bus/counter/devices/counterX/countY/capture
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Historical capture of the Count Y count data.
-
 What:		/sys/bus/counter/devices/counterX/countY/ceiling
 KernelVersion:	5.2
 Contact:	linux-iio@vger.kernel.org
@@ -209,13 +203,6 @@ Description:
 		both edges:
 			Any state transition.
 
-What:		/sys/bus/counter/devices/counterX/countY/num_overflows
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		This attribute indicates the number of overflows of count Y.
-
-What:		/sys/bus/counter/devices/counterX/countY/capture_component_id
 What:		/sys/bus/counter/devices/counterX/countY/ceiling_component_id
 What:		/sys/bus/counter/devices/counterX/countY/floor_component_id
 What:		/sys/bus/counter/devices/counterX/countY/count_mode_component_id
@@ -226,14 +213,11 @@ What:		/sys/bus/counter/devices/counterX/countY/prescaler_component_id
 What:		/sys/bus/counter/devices/counterX/countY/preset_component_id
 What:		/sys/bus/counter/devices/counterX/countY/preset_enable_component_id
 What:		/sys/bus/counter/devices/counterX/countY/signalZ_action_component_id
-What:		/sys/bus/counter/devices/counterX/countY/num_overflows_component_id
 What:		/sys/bus/counter/devices/counterX/signalY/cable_fault_component_id
 What:		/sys/bus/counter/devices/counterX/signalY/cable_fault_enable_component_id
 What:		/sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler_component_id
 What:		/sys/bus/counter/devices/counterX/signalY/index_polarity_component_id
-What:		/sys/bus/counter/devices/counterX/signalY/polarity_component_id
 What:		/sys/bus/counter/devices/counterX/signalY/synchronous_mode_component_id
-What:		/sys/bus/counter/devices/counterX/signalY/frequency_component_id
 KernelVersion:	5.16
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -319,19 +303,6 @@ Description:
 		Discrete set of available values for the respective Signal Y
 		configuration are listed in this file.
 
-What:		/sys/bus/counter/devices/counterX/signalY/polarity
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Active level of Signal Y. The following polarity values are
-		available:
-
-		positive:
-			Signal high state considered active level (rising edge).
-
-		negative:
-			Signal low state considered active level (falling edge).
-
 What:		/sys/bus/counter/devices/counterX/signalY/name
 KernelVersion:	5.2
 Contact:	linux-iio@vger.kernel.org
@@ -374,9 +345,3 @@ Description:
 			via index_polarity. The index function (as enabled via
 			preset_enable) is performed synchronously with the
 			quadrature clock on the active level of the index input.
-
-What:		/sys/bus/counter/devices/counterX/signalY/frequency
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Read-only attribute that indicates the signal Y frequency, in Hz.

Documentation/ABI/testing/sysfs-bus-cxl

@@ -7,7 +7,6 @@ Description:
 		all descendant memdevs for unbind. Writing '1' to this attribute
 		flushes that work.
 
-
 What:		/sys/bus/cxl/devices/memX/firmware_version
 Date:		December, 2020
 KernelVersion:	v5.12
@@ -17,7 +16,6 @@ Description:
 		Memory Device Output Payload in the CXL-2.0
 		specification.
 
-
 What:		/sys/bus/cxl/devices/memX/ram/size
 Date:		December, 2020
 KernelVersion:	v5.12
@@ -27,7 +25,6 @@ Description:
 		identically named field in the Identify Memory Device Output
 		Payload in the CXL-2.0 specification.
 
-
 What:		/sys/bus/cxl/devices/memX/pmem/size
 Date:		December, 2020
 KernelVersion:	v5.12
@@ -37,7 +34,6 @@ Description:
 		identically named field in the Identify Memory Device Output
 		Payload in the CXL-2.0 specification.
 
-
 What:		/sys/bus/cxl/devices/memX/serial
 Date:		January, 2022
 KernelVersion:	v5.18
@@ -47,7 +43,6 @@ Description:
 		capability. Mandatory for CXL devices, see CXL 2.0 8.1.12.2
 		Memory Device PCIe Capabilities and Extended Capabilities.
 
-
 What:		/sys/bus/cxl/devices/memX/numa_node
 Date:		January, 2022
 KernelVersion:	v5.18
@@ -57,334 +52,114 @@ Description:
 		host PCI device for this memory device, emit the CPU node
 		affinity for this device.
 
-
 What:		/sys/bus/cxl/devices/*/devtype
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		(RO) CXL device objects export the devtype attribute which
-		mirrors the same value communicated in the DEVTYPE environment
-		variable for uevents for devices on the "cxl" bus.
-
+		CXL device objects export the devtype attribute which mirrors
+		the same value communicated in the DEVTYPE environment variable
+		for uevents for devices on the "cxl" bus.
 
 What:		/sys/bus/cxl/devices/*/modalias
 Date:		December, 2021
 KernelVersion:	v5.18
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		(RO) CXL device objects export the modalias attribute which
-		mirrors the same value communicated in the MODALIAS environment
-		variable for uevents for devices on the "cxl" bus.
-
+		CXL device objects export the modalias attribute which mirrors
+		the same value communicated in the MODALIAS environment variable
+		for uevents for devices on the "cxl" bus.
 
 What:		/sys/bus/cxl/devices/portX/uport
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		(RO) CXL port objects are enumerated from either a platform
-		firmware device (ACPI0017 and ACPI0016) or PCIe switch upstream
-		port with CXL component registers. The 'uport' symlink connects
-		the CXL portX object to the device that published the CXL port
+		CXL port objects are enumerated from either a platform firmware
+		device (ACPI0017 and ACPI0016) or PCIe switch upstream port with
+		CXL component registers. The 'uport' symlink connects the CXL
+		portX object to the device that published the CXL port
 		capability.
 
-
 What:		/sys/bus/cxl/devices/portX/dportY
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		(RO) CXL port objects are enumerated from either a platform
-		firmware device (ACPI0017 and ACPI0016) or PCIe switch upstream
-		port with CXL component registers. The 'dportY' symlink
-		identifies one or more downstream ports that the upstream port
-		may target in its decode of CXL memory resources.  The 'Y'
-		integer reflects the hardware port unique-id used in the
-		hardware decoder target list.
-
+		CXL port objects are enumerated from either a platform firmware
+		device (ACPI0017 and ACPI0016) or PCIe switch upstream port with
+		CXL component registers. The 'dportY' symlink identifies one or
+		more downstream ports that the upstream port may target in its
+		decode of CXL memory resources.  The 'Y' integer reflects the
+		hardware port unique-id used in the hardware decoder target
+		list.
 
 What:		/sys/bus/cxl/devices/decoderX.Y
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		(RO) CXL decoder objects are enumerated from either a platform
+		CXL decoder objects are enumerated from either a platform
 		firmware description, or a CXL HDM decoder register set in a
 		PCIe device (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder
 		Capability Structure). The 'X' in decoderX.Y represents the
 		cxl_port container of this decoder, and 'Y' represents the
 		instance id of a given decoder resource.
 
-
 What:		/sys/bus/cxl/devices/decoderX.Y/{start,size}
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		(RO) The 'start' and 'size' attributes together convey the
-		physical address base and number of bytes mapped in the
-		decoder's decode window. For decoders of devtype
-		"cxl_decoder_root" the address range is fixed. For decoders of
-		devtype "cxl_decoder_switch" the address is bounded by the
-		decode range of the cxl_port ancestor of the decoder's cxl_port,
-		and dynamically updates based on the active memory regions in
-		that address space.
-
+		The 'start' and 'size' attributes together convey the physical
+		address base and number of bytes mapped in the decoder's decode
+		window. For decoders of devtype "cxl_decoder_root" the address
+		range is fixed. For decoders of devtype "cxl_decoder_switch" the
+		address is bounded by the decode range of the cxl_port ancestor
+		of the decoder's cxl_port, and dynamically updates based on the
+		active memory regions in that address space.
 
 What:		/sys/bus/cxl/devices/decoderX.Y/locked
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		(RO) CXL HDM decoders have the capability to lock the
-		configuration until the next device reset. For decoders of
-		devtype "cxl_decoder_root" there is no standard facility to
-		unlock them.  For decoders of devtype "cxl_decoder_switch" a
-		secondary bus reset, of the PCIe bridge that provides the bus
-		for this decoders uport, unlocks / resets the decoder.
-
+		CXL HDM decoders have the capability to lock the configuration
+		until the next device reset. For decoders of devtype
+		"cxl_decoder_root" there is no standard facility to unlock them.
+		For decoders of devtype "cxl_decoder_switch" a secondary bus
+		reset, of the PCIe bridge that provides the bus for this
+		decoders uport, unlocks / resets the decoder.
 
 What:		/sys/bus/cxl/devices/decoderX.Y/target_list
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		(RO) Display a comma separated list of the current decoder
-		target configuration. The list is ordered by the current
-		configured interleave order of the decoder's dport instances.
-		Each entry in the list is a dport id.
-
+		Display a comma separated list of the current decoder target
+		configuration. The list is ordered by the current configured
+		interleave order of the decoder's dport instances. Each entry in
+		the list is a dport id.
 
 What:		/sys/bus/cxl/devices/decoderX.Y/cap_{pmem,ram,type2,type3}
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		(RO) When a CXL decoder is of devtype "cxl_decoder_root", it
+		When a CXL decoder is of devtype "cxl_decoder_root", it
 		represents a fixed memory window identified by platform
 		firmware. A fixed window may only support a subset of memory
 		types. The 'cap_*' attributes indicate whether persistent
 		memory, volatile memory, accelerator memory, and / or expander
 		memory may be mapped behind this decoder's memory window.
 
-
 What:		/sys/bus/cxl/devices/decoderX.Y/target_type
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		(RO) When a CXL decoder is of devtype "cxl_decoder_switch", it
-		can optionally decode either accelerator memory (type-2) or
-		expander memory (type-3). The 'target_type' attribute indicates
-		the current setting which may dynamically change based on what
+		When a CXL decoder is of devtype "cxl_decoder_switch", it can
+		optionally decode either accelerator memory (type-2) or expander
+		memory (type-3). The 'target_type' attribute indicates the
+		current setting which may dynamically change based on what
 		memory regions are activated in this decode hierarchy.
-
-
-What:		/sys/bus/cxl/devices/endpointX/CDAT
-Date:		July, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RO) If this sysfs entry is not present no DOE mailbox was
-		found to support CDAT data.  If it is present and the length of
-		the data is 0 reading the CDAT data failed.  Otherwise the CDAT
-		data is reported.
-
-
-What:		/sys/bus/cxl/devices/decoderX.Y/mode
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RW) When a CXL decoder is of devtype "cxl_decoder_endpoint" it
-		translates from a host physical address range, to a device local
-		address range. Device-local address ranges are further split
-		into a 'ram' (volatile memory) range and 'pmem' (persistent
-		memory) range. The 'mode' attribute emits one of 'ram', 'pmem',
-		'mixed', or 'none'. The 'mixed' indication is for error cases
-		when a decoder straddles the volatile/persistent partition
-		boundary, and 'none' indicates the decoder is not actively
-		decoding, or no DPA allocation policy has been set.
-
-		'mode' can be written, when the decoder is in the 'disabled'
-		state, with either 'ram' or 'pmem' to set the boundaries for the
-		next allocation.
-
-
-What:		/sys/bus/cxl/devices/decoderX.Y/dpa_resource
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RO) When a CXL decoder is of devtype "cxl_decoder_endpoint",
-		and its 'dpa_size' attribute is non-zero, this attribute
-		indicates the device physical address (DPA) base address of the
-		allocation.
-
-
-What:		/sys/bus/cxl/devices/decoderX.Y/dpa_size
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RW) When a CXL decoder is of devtype "cxl_decoder_endpoint" it
-		translates from a host physical address range, to a device local
-		address range. The range, base address plus length in bytes, of
-		DPA allocated to this decoder is conveyed in these 2 attributes.
-		Allocations can be mutated as long as the decoder is in the
-		disabled state. A write to 'dpa_size' releases the previous DPA
-		allocation and then attempts to allocate from the free capacity
-		in the device partition referred to by 'decoderX.Y/mode'.
-		Allocate and free requests can only be performed on the highest
-		instance number disabled decoder with non-zero size. I.e.
-		allocations are enforced to occur in increasing 'decoderX.Y/id'
-		order and frees are enforced to occur in decreasing
-		'decoderX.Y/id' order.
-
-
-What:		/sys/bus/cxl/devices/decoderX.Y/interleave_ways
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RO) The number of targets across which this decoder's host
-		physical address (HPA) memory range is interleaved. The device
-		maps every Nth block of HPA (of size ==
-		'interleave_granularity') to consecutive DPA addresses. The
-		decoder's position in the interleave is determined by the
-		device's (endpoint or switch) switch ancestry. For root
-		decoders their interleave is specified by platform firmware and
-		they only specify a downstream target order for host bridges.
-
-
-What:		/sys/bus/cxl/devices/decoderX.Y/interleave_granularity
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RO) The number of consecutive bytes of host physical address
-		space this decoder claims at address N before the decode rotates
-		to the next target in the interleave at address N +
-		interleave_granularity (assuming N is aligned to
-		interleave_granularity).
-
-
-What:		/sys/bus/cxl/devices/decoderX.Y/create_pmem_region
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RW) Write a string in the form 'regionZ' to start the process
-		of defining a new persistent memory region (interleave-set)
-		within the decode range bounded by root decoder 'decoderX.Y'.
-		The value written must match the current value returned from
-		reading this attribute. An atomic compare exchange operation is
-		done on write to assign the requested id to a region and
-		allocate the region-id for the next creation attempt. EBUSY is
-		returned if the region name written does not match the current
-		cached value.
-
-
-What:		/sys/bus/cxl/devices/decoderX.Y/delete_region
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(WO) Write a string in the form 'regionZ' to delete that region,
-		provided it is currently idle / not bound to a driver.
-
-
-What:		/sys/bus/cxl/devices/regionZ/uuid
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RW) Write a unique identifier for the region. This field must
-		be set for persistent regions and it must not conflict with the
-		UUID of another region.
-
-
-What:		/sys/bus/cxl/devices/regionZ/interleave_granularity
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RW) Set the number of consecutive bytes each device in the
-		interleave set will claim. The possible interleave granularity
-		values are determined by the CXL spec and the participating
-		devices.
-
-
-What:		/sys/bus/cxl/devices/regionZ/interleave_ways
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RW) Configures the number of devices participating in the
-		region is set by writing this value. Each device will provide
-		1/interleave_ways of storage for the region.
-
-
-What:		/sys/bus/cxl/devices/regionZ/size
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RW) System physical address space to be consumed by the region.
-		When written trigger the driver to allocate space out of the
-		parent root decoder's address space. When read the size of the
-		address space is reported and should match the span of the
-		region's resource attribute. Size shall be set after the
-		interleave configuration parameters. Once set it cannot be
-		changed, only freed by writing 0. The kernel makes no guarantees
-		that data is maintained over an address space freeing event, and
-		there is no guarantee that a free followed by an allocate
-		results in the same address being allocated.
-
-
-What:		/sys/bus/cxl/devices/regionZ/resource
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RO) A region is a contiguous partition of a CXL root decoder
-		address space. Region capacity is allocated by writing to the
-		size attribute, the resulting physical address space determined
-		by the driver is reflected here. It is therefore not useful to
-		read this before writing a value to the size attribute.
-
-
-What:		/sys/bus/cxl/devices/regionZ/target[0..N]
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RW) Write an endpoint decoder object name to 'targetX' where X
-		is the intended position of the endpoint device in the region
-		interleave and N is the 'interleave_ways' setting for the
-		region. ENXIO is returned if the write results in an impossible
-		to map decode scenario, like the endpoint is unreachable at that
-		position relative to the root decoder interleave. EBUSY is
-		returned if the position in the region is already occupied, or
-		if the region is not in a state to accept interleave
-		configuration changes. EINVAL is returned if the object name is
-		not an endpoint decoder. Once all positions have been
-		successfully written a final validation for decode conflicts is
-		performed before activating the region.
-
-
-What:		/sys/bus/cxl/devices/regionZ/commit
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RW) Write a boolean 'true' string value to this attribute to
-		trigger the region to transition from the software programmed
-		state to the actively decoding in hardware state. The commit
-		operation in addition to validating that the region is in proper
-		configured state, validates that the decoders are being
-		committed in spec mandated order (last committed decoder id +
-		1), and checks that the hardware accepts the commit request.
-		Reading this value indicates whether the region is committed or
-		not.

Documentation/ABI/testing/sysfs-bus-event_source-devices-caps

@@ -1,18 +0,0 @@
-What:		/sys/bus/event_source/devices/<dev>/caps
-Date:		May 2022
-KernelVersion:	5.19
-Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
-Description:
-		Attribute group to describe the capabilities exposed
-		for a particular pmu. Each attribute of this group can
-		expose information specific to a PMU, say pmu_name, so that
-		userspace can understand some of the feature which the
-		platform specific PMU supports.
-
-		One of the example available capability in supported platform
-		like Intel is pmu_name, which exposes underlying CPU name known
-		to the PMU driver.
-
-		Example output in powerpc:
-		grep . /sys/bus/event_source/devices/cpu/caps/*
-		/sys/bus/event_source/devices/cpu/caps/pmu_name:POWER9

Documentation/ABI/testing/sysfs-bus-fcoe

@@ -31,7 +31,7 @@ Description:	'FCoE Controller' instances on the fcoe bus.
 		1) Write interface name to ctlr_create 2) Configure the FCoE
 		Controller (ctlr_X) 3) Enable the FCoE Controller to begin
 		discovery and login. The FCoE Controller is destroyed by
-		writing its name, i.e. ctlr_X to the ctlr_delete file.
+		writing it's name, i.e. ctlr_X to the ctlr_delete file.
 
 Attributes:
 

Documentation/ABI/testing/sysfs-bus-iio

@@ -79,11 +79,6 @@ Description:
 		* "accel-base"
 		* "accel-display"
 
-		For devices where an accelerometer is housed in the swivel camera subassembly
-		(for AR application), the following standardized label is used:
-
-		* "accel-camera"
-
 What:		/sys/bus/iio/devices/iio:deviceX/current_timestamp_clock
 KernelVersion:	4.5
 Contact:	linux-iio@vger.kernel.org
@@ -107,9 +102,6 @@ Description:
 		relevant directories.  If it affects all of the above
 		then it is to be found in the base device directory.
 
-		The stm32-timer-trigger has the additional characteristic that
-		a sampling_frequency of 0 is defined to stop sampling.
-
 What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available
@@ -196,7 +188,7 @@ Description:
 		Raw capacitance measurement from channel Y. Units after
 		application of scale and offset are nanofarads.
 
-What:		/sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw
+What:		/sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw
 KernelVersion:	3.2
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -207,25 +199,6 @@ Description:
 		is required is a consistent labeling.  Units after application
 		of scale and offset are nanofarads.
 
-What:		/sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_zeropoint
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		For differential channels, this an offset that is applied
-		equally to both inputs. As the reading is of the difference
-		between the two inputs, this should not be applied to the _raw
-		reading by userspace (unlike _offset) and unlike calibbias
-		it does not affect the differential value measured because
-		the effect of _zeropoint cancels out across the two inputs
-		that make up the differential pair. It's purpose is to bring
-		the individual signals, before the differential is measured,
-		within the measurement range of the device. The naming is
-		chosen because if the separate inputs that make the
-		differential pair are drawn on a graph in their
-		_raw  units, this is the value that the zero point on the
-		measurement axis represents. It is expressed with the
-		same scaling as _raw.
-
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_x_raw
@@ -260,15 +233,6 @@ Description:
 		Has all of the equivalent parameters as per voltageY. Units
 		after application of scale and offset are m/s^2.
 
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_linear_x_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_linear_y_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_linear_z_raw
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		As per in_accel_X_raw attributes, but minus the
-		acceleration due to gravity.
-
 What:		/sys/bus/iio/devices/iio:deviceX/in_gravity_x_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_gravity_y_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_gravity_z_raw
@@ -2066,99 +2030,3 @@ Description:
 		Available range for the forced calibration value, expressed as:
 
 		- a range specified as "[min step max]"
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltageX_sampling_frequency
-What:		/sys/bus/iio/devices/iio:deviceX/in_powerY_sampling_frequency
-What:		/sys/bus/iio/devices/iio:deviceX/in_currentZ_sampling_frequency
-KernelVersion:	5.20
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Some devices have separate controls of sampling frequency for
-		individual channels. If multiple channels are enabled in a scan,
-		then the sampling_frequency of the scan may be computed from the
-		per channel sampling frequencies.
-
-What:		/sys/.../events/in_accel_gesture_singletap_en
-What:		/sys/.../events/in_accel_gesture_doubletap_en
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Device generates an event on a single or double tap.
-
-What:		/sys/.../events/in_accel_gesture_singletap_value
-What:		/sys/.../events/in_accel_gesture_doubletap_value
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Specifies the threshold value that the device is comparing
-		against to generate the tap gesture event. The lower
-		threshold value increases the sensitivity of tap detection.
-		Units and the exact meaning of value are device-specific.
-
-What:		/sys/.../events/in_accel_gesture_tap_value_available
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Lists all available threshold values which can be used to
-		modify the sensitivity of the tap detection.
-
-What:		/sys/.../events/in_accel_gesture_singletap_reset_timeout
-What:		/sys/.../events/in_accel_gesture_doubletap_reset_timeout
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Specifies the timeout value in seconds for the tap detector
-		to not to look for another tap event after the event as
-		occurred. Basically the minimum quiet time between the two
-		single-tap's or two double-tap's.
-
-What:		/sys/.../events/in_accel_gesture_tap_reset_timeout_available
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Lists all available tap reset timeout values. Units in seconds.
-
-What:		/sys/.../events/in_accel_gesture_doubletap_tap2_min_delay
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Specifies the minimum quiet time in seconds between the two
-		taps of a double tap.
-
-What:		/sys/.../events/in_accel_gesture_doubletap_tap2_min_delay_available
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Lists all available delay values between two taps in the double
-		tap. Units in seconds.
-
-What:		/sys/.../events/in_accel_gesture_tap_maxtomin_time
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Specifies the maximum time difference allowed between upper
-		and lower peak of tap to consider it as the valid tap event.
-		Units in seconds.
-
-What:		/sys/.../events/in_accel_gesture_tap_maxtomin_time_available
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Lists all available time values between upper peak to lower
-		peak. Units in seconds.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_rot_yaw_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_rot_pitch_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_rot_roll_raw
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Raw (unscaled) euler angles readings. Units after
-		application of scale are deg.
-
-What:		/sys/bus/iio/devices/iio:deviceX/serialnumber
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		An example format is 16-bytes, 2-digits-per-byte, HEX-string
-		representing the sensor unique ID number.

Documentation/ABI/testing/sysfs-bus-iio-bno055

@@ -1,81 +0,0 @@
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_raw_range
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Raw (unscaled) range for acceleration readings. Unit after
-		application of scale is m/s^2. Note that this doesn't affects
-		the scale (which should be used when changing the maximum and
-		minimum readable value affects also the reading scaling factor).
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_raw_range
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Range for angular velocity readings in radians per second. Note
-		that this does not affects the scale (which should be used when
-		changing the maximum and minimum readable value affects also the
-		reading scaling factor).
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_raw_range_available
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		List of allowed values for in_accel_raw_range attribute
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_raw_range_available
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		List of allowed values for in_anglvel_raw_range attribute
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_magn_calibration_fast_enable
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Can be 1 or 0. Enables/disables the "Fast Magnetometer
-		Calibration" HW function.
-
-What:		/sys/bus/iio/devices/iio:deviceX/fusion_enable
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Can be 1 or 0. Enables/disables the "sensor fusion" (a.k.a.
-		NDOF) HW function.
-
-What:		/sys/bus/iio/devices/iio:deviceX/calibration_data
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Reports the binary calibration data blob for the IMU sensors.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_calibration_auto_status
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Reports the autocalibration status for the accelerometer sensor.
-		Can be 0 (calibration non even enabled) or 1 to 5 where the greater
-		the number, the better the calibration status.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_gyro_calibration_auto_status
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Reports the autocalibration status for the gyroscope sensor.
-		Can be 0 (calibration non even enabled) or 1 to 5 where the greater
-		the number, the better the calibration status.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_magn_calibration_auto_status
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Reports the autocalibration status for the magnetometer sensor.
-		Can be 0 (calibration non even enabled) or 1 to 5 where the greater
-		the number, the better the calibration status.
-
-What:		/sys/bus/iio/devices/iio:deviceX/sys_calibration_auto_status
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Reports the status for the IMU overall autocalibration.
-		Can be 0 (calibration non even enabled) or 1 to 5 where the greater
-		the number, the better the calibration status.

Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746

@@ -1,11 +0,0 @@
-What:		/sys/.../iio:deviceX/in_capacitableY_calibbias_calibration
-What:		/sys/.../iio:deviceX/in_capacitableY_calibscale_calibration
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Write 1 to trigger a calibration of the calibbias or
-		calibscale. For calibscale, a full scale capacitance should
-		be connected to the capacitance input and a
-		calibscale_calibration then started.  For calibbias see
-		the device datasheet section on "capacitive system offset
-		calibration".

Documentation/ABI/testing/sysfs-bus-iio-proximity

@@ -18,7 +18,7 @@ Description:
 		on the signal from which time of flight measurements are
 		taken.
 		The appropriate values to take is dependent on both the
-		sensor and its operating environment:
+		sensor and it's operating environment:
 		* as3935 (0-31 range)
 		18 = indoors (default)
 		14 = outdoors

Documentation/ABI/testing/sysfs-bus-iio-sx9324

@@ -5,7 +5,6 @@ Contact:	Gwendal Grignou <gwendal@chromium.org>
 Description:
 		SX9324 has 3 inputs, CS0, CS1 and CS2. Hardware layout
 		defines if the input is
-
 		+ not connected (HZ),
 		+ grounded (GD),
 		+ connected to an antenna where it can act as a base

Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856

@@ -0,0 +1,31 @@
+What:		/sys/bus/iio/devices/iio:deviceX/fault_oc
+KernelVersion:	5.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Open-circuit fault. The detection of open-circuit faults,
+		such as those caused by broken thermocouple wires.
+		Reading returns either '1' or '0'.
+
+		===  =======================================================
+		'1'  An open circuit such as broken thermocouple wires
+		     has been detected.
+		'0'  No open circuit or broken thermocouple wires are detected
+		===  =======================================================
+
+What:		/sys/bus/iio/devices/iio:deviceX/fault_ovuv
+KernelVersion:	5.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Overvoltage or Undervoltage Input Fault. The internal circuitry
+		is protected from excessive voltages applied to the thermocouple
+		cables by integrated MOSFETs at the T+ and T- inputs, and the
+		BIAS output. These MOSFETs turn off when the input voltage is
+		negative or greater than VDD.
+
+		Reading returns either '1' or '0'.
+
+		===  =======================================================
+		'1'  The input voltage is negative or greater than VDD.
+		'0'  The input voltage is positive and less than VDD (normal
+		     state).
+		===  =======================================================

Documentation/ABI/testing/sysfs-bus-iio-temperature-max31865

@@ -0,0 +1,20 @@
+What:		/sys/bus/iio/devices/iio:deviceX/fault_ovuv
+KernelVersion:	5.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Overvoltage or Undervoltage Input fault. The internal circuitry
+		is protected from excessive voltages applied to the thermocouple
+		cables at FORCE+, FORCE2, RTDIN+ & RTDIN-. This circuitry turn
+		off when the input voltage is negative or greater than VDD.
+
+		Reading returns '1' if input voltage is negative or greater
+		than VDD, otherwise '0'.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_filter_notch_center_frequency
+KernelVersion:	5.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Notch frequency in Hz for a noise rejection filter. Used i.e for
+		line noise rejection.
+
+		Valid notch filter values are 50 Hz and 60 Hz.

Documentation/ABI/testing/sysfs-bus-iio-thermocouple

@@ -1,18 +0,0 @@
-What:		/sys/bus/iio/devices/iio:deviceX/fault_ovuv
-KernelVersion:	5.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Overvoltage or Undervoltage Input Fault. The internal circuitry
-		is protected from excessive voltages applied to the thermocouple
-		cables. The device can also detect if such a condition occurs.
-
-		Reading returns '1' if input voltage is negative or greater
-		than VDD, otherwise '0'.
-
-What:		/sys/bus/iio/devices/iio:deviceX/fault_oc
-KernelVersion:	5.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Open-circuit fault. The detection of open-circuit faults,
-		such as those caused by broken thermocouple wires.
-		Reading returns '1' if fault, '0' otherwise.

Documentation/ABI/testing/sysfs-bus-iio-timer-stm32

@@ -90,6 +90,14 @@ Description:
 		Reading returns the current master modes.
 		Writing set the master mode
 
+What:		/sys/bus/iio/devices/triggerX/sampling_frequency
+KernelVersion:	4.11
+Contact:	benjamin.gaignard@st.com
+Description:
+		Reading returns the current sampling frequency.
+		Writing an value different of 0 set and start sampling.
+		Writing 0 stop sampling.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_count0_preset
 KernelVersion:	4.12
 Contact:	benjamin.gaignard@st.com

Documentation/ABI/testing/sysfs-bus-iio-vf610

@@ -1,4 +1,4 @@
-What:		/sys/bus/iio/devices/iio:deviceX/in_conversion_mode
+What:		/sys/bus/iio/devices/iio:deviceX/conversion_mode
 KernelVersion:	4.2
 Contact:	linux-iio@vger.kernel.org
 Description:

Documentation/ABI/testing/sysfs-bus-pci

@@ -457,36 +457,3 @@ Description:
 
 		The file is writable if the PF is bound to a driver that
 		implements ->sriov_set_msix_vec_count().
-
-What:		/sys/bus/pci/devices/.../resourceN_resize
-Date:		September 2022
-Contact:	Alex Williamson <alex.williamson@redhat.com>
-Description:
-		These files provide an interface to PCIe Resizable BAR support.
-		A file is created for each BAR resource (N) supported by the
-		PCIe Resizable BAR extended capability of the device.  Reading
-		each file exposes the bitmap of available resource sizes:
-
-		# cat resource1_resize
-		00000000000001c0
-
-		The bitmap represents supported resource sizes for the BAR,
-		where bit0 = 1MB, bit1 = 2MB, bit2 = 4MB, etc.  In the above
-		example the device supports 64MB, 128MB, and 256MB BAR sizes.
-
-		When writing the file, the user provides the bit position of
-		the desired resource size, for example:
-
-		# echo 7 > resource1_resize
-
-		This indicates to set the size value corresponding to bit 7,
-		128MB.  The resulting size is 2 ^ (bit# + 20).  This definition
-		matches the PCIe specification of this capability.
-
-		In order to make use of resource resizing, all PCI drivers must
-		be unbound from the device and peer devices under the same
-		parent bridge may need to be soft removed.  In the case of
-		VGA devices, writing a resize value will remove low level
-		console drivers from the device.  Raw users of pci-sysfs
-		resourceN attributes must be terminated prior to resizing.
-		Success of the resizing operation is not guaranteed.

Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub

@@ -1,8 +0,0 @@
-What:		/sys/bus/platform/devices/<dev>/always_powered_in_suspend
-Date:		June 2022
-KernelVersion:	5.20
-Contact:	Matthias Kaehlcke <matthias@kaehlcke.net>
-		linux-usb@vger.kernel.org
-Description:
-		(RW) Controls whether the USB hub remains always powered
-		during system suspend or not.

Documentation/ABI/testing/sysfs-bus-surface_aggregator-tabletsw

@@ -1,57 +0,0 @@
-What:		/sys/bus/surface_aggregator/devices/01:0e:01:00:01/state
-Date:		July 2022
-KernelVersion:	5.20
-Contact:	Maximilian Luz <luzmaximilian@gmail.com>
-Description:
-		This attribute returns a string with the current type-cover
-		or device posture, as indicated by the embedded controller.
-		Currently returned posture states are:
-
-		- "disconnected": The type-cover has been disconnected.
-
-		- "closed": The type-cover has been folded closed and lies on
-		  top of the display.
-
-		- "laptop": The type-cover is open and in laptop-mode, i.e.,
-		  ready for normal use.
-
-		- "folded-canvas": The type-cover has been folded back
-		  part-ways, but does not lie flush with the back side of the
-		  device. In general, this means that the kick-stand is used
-		  and extended atop of the cover.
-
-		- "folded-back": The type cover has been fully folded back and
-		  lies flush with the back side of the device.
-
-		- "<unknown>": The current state is unknown to the driver, for
-		  example due to newer as-of-yet unsupported hardware.
-
-		New states may be introduced with new hardware. Users therefore
-		must not rely on this list of states being exhaustive and
-		gracefully handle unknown states.
-
-What:		/sys/bus/surface_aggregator/devices/01:26:01:00:01/state
-Date:		July 2022
-KernelVersion:	5.20
-Contact:	Maximilian Luz <luzmaximilian@gmail.com>
-Description:
-		This attribute returns a string with the current device posture, as indicated by the embedded controller. Currently
-		returned posture states are:
-
-		- "closed": The lid of the device is closed.
-
-		- "laptop": The lid of the device is opened and the device
-		  operates as a normal laptop.
-
-		- "slate": The screen covers the keyboard or has been flipped
-		  back and the device operates mainly based on touch input.
-
-		- "tablet": The device operates as tablet and exclusively
-		  relies on touch input (or external peripherals).
-
-		- "<unknown>": The current state is unknown to the driver, for
-		  example due to newer as-of-yet unsupported hardware.
-
-		New states may be introduced with new hardware. Users therefore
-		must not rely on this list of states being exhaustive and
-		gracefully handle unknown states.

Documentation/ABI/testing/sysfs-bus-thunderbolt

@@ -153,7 +153,7 @@ Date:		Jan 2020
 KernelVersion:	5.5
 Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
 Description:	This attribute reports number of RX lanes the device is
-		using simultaneously through its upstream port.
+		using simultaneusly through its upstream port.
 
 What:		/sys/bus/thunderbolt/devices/.../tx_speed
 Date:		Jan 2020
@@ -167,7 +167,7 @@ Date:		Jan 2020
 KernelVersion:	5.5
 Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
 Description:	This attribute reports number of TX lanes the device is
-		using simultaneously through its upstream port.
+		using simultaneusly through its upstream port.
 
 What:		/sys/bus/thunderbolt/devices/.../vendor
 Date:		Sep 2017
@@ -293,16 +293,6 @@ Contact:	thunderbolt-software@lists.01.org
 Description:	This contains XDomain service specific settings as
 		bitmask. Format: %x
 
-What:		/sys/bus/thunderbolt/devices/usb4_portX/connector
-Date:		April 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Symlink to the USB Type-C connector. This link is only
-		created when USB Type-C Connector Class is enabled,
-		and only if the system firmware is capable of
-		describing the connection between a port and its
-		connector.
-
 What:		/sys/bus/thunderbolt/devices/usb4_portX/link
 Date:		Sep 2021
 KernelVersion:	v5.14

Documentation/ABI/testing/sysfs-bus-usb

@@ -253,17 +253,6 @@ Description:
 		only if the system firmware is capable of describing the
 		connection between a port and its connector.
 
-What:		/sys/bus/usb/devices/.../<hub_interface>/port<X>/disable
-Date:		June 2022
-Contact:	Michael Grzeschik <m.grzeschik@pengutronix.de>
-Description:
-		This file controls the state of a USB port, including
-		Vbus power output (but only on hubs that support
-		power switching -- most hubs don't support it). If
-		a port is disabled, the port is unusable: Devices
-		attached to the port will not be detected, initialized,
-		or enumerated.
-
 What:		/sys/bus/usb/devices/.../power/usb2_lpm_l1_timeout
 Date:		May 2013
 Contact:	Mathias Nyman <mathias.nyman@linux.intel.com>

Documentation/ABI/testing/sysfs-class-cxl

@@ -103,8 +103,8 @@ What:           /sys/class/cxl/<afu>/api_version_compatible
 Date:           September 2014
 Contact:        linuxppc-dev@lists.ozlabs.org
 Description:    read only
-                Decimal value of the lowest version of the userspace API
-                this kernel supports.
+                Decimal value of the the lowest version of the userspace API
+                this this kernel supports.
 Users:		https://github.com/ibm-capi/libcxl
 
 

Documentation/ABI/testing/sysfs-class-firmware

@@ -1,77 +0,0 @@
-What: 		/sys/class/firmware/.../data
-Date:		July 2022
-KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	The data sysfs file is used for firmware-fallback and for
-		firmware uploads. Cat a firmware image to this sysfs file
-		after you echo 1 to the loading sysfs file. When the firmware
-		image write is complete, echo 0 to the loading sysfs file. This
-		sequence will signal the completion of the firmware write and
-		signal the lower-level driver that the firmware data is
-		available.
-
-What: 		/sys/class/firmware/.../cancel
-Date:		July 2022
-KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	Write-only. For firmware uploads, write a "1" to this file to
-		request that the transfer of firmware data to the lower-level
-		device be canceled. This request will be rejected (EBUSY) if
-		the update cannot be canceled (e.g. a FLASH write is in
-		progress) or (ENODEV) if there is no firmware update in progress.
-
-What: 		/sys/class/firmware/.../error
-Date:		July 2022
-KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	Read-only. Returns a string describing a failed firmware
-		upload. This string will be in the form of <STATUS>:<ERROR>,
-		where <STATUS> will be one of the status strings described
-		for the status sysfs file and <ERROR> will be one of the
-		following: "hw-error", "timeout", "user-abort", "device-busy",
-		"invalid-file-size", "read-write-error", "flash-wearout". The
-		error sysfs file is only meaningful when the current firmware
-		upload status is "idle". If this file is read while a firmware
-		transfer is in progress, then the read will fail with EBUSY.
-
-What: 		/sys/class/firmware/.../loading
-Date:		July 2022
-KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	The loading sysfs file is used for both firmware-fallback and
-		for firmware uploads. Echo 1 onto the loading file to indicate
-		you are writing a firmware file to the data sysfs node. Echo
-		-1 onto this file to abort the data write or echo 0 onto this
-		file to indicate that the write is complete. For firmware
-		uploads, the zero value also triggers the transfer of the
-		firmware data to the lower-level device driver.
-
-What: 		/sys/class/firmware/.../remaining_size
-Date:		July 2022
-KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	Read-only. For firmware upload, this file contains the size
-		of the firmware data that remains to be transferred to the
-		lower-level device driver. The size value is initialized to
-		the full size of the firmware image that was previously
-		written to the data sysfs file. This value is periodically
-		updated during the "transferring" phase of the firmware
-		upload.
-		Format: "%u".
-
-What: 		/sys/class/firmware/.../status
-Date:		July 2022
-KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	Read-only. Returns a string describing the current status of
-		a firmware upload. The string will be one of the following:
-		idle, "receiving", "preparing", "transferring", "programming".
-
-What: 		/sys/class/firmware/.../timeout
-Date:		July 2022
-KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	This file supports the timeout mechanism for firmware
-		fallback.  This file has no affect on firmware uploads. For
-		more information on timeouts please see the documentation
-		for firmware fallback.

Documentation/ABI/testing/sysfs-class-hwmon

@@ -938,12 +938,3 @@ Description:
 		- 1: enable
 
 		RW
-
-What:		/sys/class/hwmon/hwmonX/device/pec
-Description:
-		PEC support on I2C devices
-
-		- 0, off, n: disable
-		- 1, on, y: enable
-
-		RW

Documentation/ABI/testing/sysfs-class-power

@@ -364,10 +364,7 @@ Date:		April 2019
 Contact:	linux-pm@vger.kernel.org
 Description:
 		Represents a battery percentage level, above which charging will
-		stop. Not all hardware is capable of setting this to an arbitrary
-		percentage. Drivers will round written values to the nearest
-		supported value. Reading back the value will show the actual
-		threshold set by the driver.
+		stop.
 
 		Access: Read, Write
 

Documentation/ABI/testing/sysfs-class-pwm

@@ -81,7 +81,7 @@ Description:
 What:		/sys/class/pwm/pwmchip<N>/pwmX/capture
 Date:		June 2016
 KernelVersion:	4.8
-Contact:	Lee Jones <lee@kernel.org>
+Contact:	Lee Jones <lee.jones@linaro.org>
 Description:
 		Capture information about a PWM signal. The output format is a
 		pair unsigned integers (period and duty cycle), separated by a

Documentation/ABI/testing/sysfs-class-regulator

@@ -370,84 +370,3 @@ Description:
 
 		'unknown' means software cannot determine the state, or
 		the reported state is invalid.
-
-What:		/sys/class/regulator/.../under_voltage
-Date:		April 2022
-KernelVersion:	5.18
-Contact:	Zev Weiss <zev@bewilderbeest.net>
-Description:
-		Some regulator directories will contain a field called
-		under_voltage.  This indicates if the device reports an
-		under-voltage fault (1) or not (0).
-
-What:		/sys/class/regulator/.../over_current
-Date:		April 2022
-KernelVersion:	5.18
-Contact:	Zev Weiss <zev@bewilderbeest.net>
-Description:
-		Some regulator directories will contain a field called
-		over_current.  This indicates if the device reports an
-		over-current fault (1) or not (0).
-
-What:		/sys/class/regulator/.../regulation_out
-Date:		April 2022
-KernelVersion:	5.18
-Contact:	Zev Weiss <zev@bewilderbeest.net>
-Description:
-		Some regulator directories will contain a field called
-		regulation_out.  This indicates if the device reports an
-		out-of-regulation fault (1) or not (0).
-
-What:		/sys/class/regulator/.../fail
-Date:		April 2022
-KernelVersion:	5.18
-Contact:	Zev Weiss <zev@bewilderbeest.net>
-Description:
-		Some regulator directories will contain a field called
-		fail.  This indicates if the device reports an output failure
-		(1) or not (0).
-
-What:		/sys/class/regulator/.../over_temp
-Date:		April 2022
-KernelVersion:	5.18
-Contact:	Zev Weiss <zev@bewilderbeest.net>
-Description:
-		Some regulator directories will contain a field called
-		over_temp.  This indicates if the device reports an
-		over-temperature fault (1) or not (0).
-
-What:		/sys/class/regulator/.../under_voltage_warn
-Date:		April 2022
-KernelVersion:	5.18
-Contact:	Zev Weiss <zev@bewilderbeest.net>
-Description:
-		Some regulator directories will contain a field called
-		under_voltage_warn.  This indicates if the device reports an
-		under-voltage warning (1) or not (0).
-
-What:		/sys/class/regulator/.../over_current_warn
-Date:		April 2022
-KernelVersion:	5.18
-Contact:	Zev Weiss <zev@bewilderbeest.net>
-Description:
-		Some regulator directories will contain a field called
-		over_current_warn.  This indicates if the device reports an
-		over-current warning (1) or not (0).
-
-What:		/sys/class/regulator/.../over_voltage_warn
-Date:		April 2022
-KernelVersion:	5.18
-Contact:	Zev Weiss <zev@bewilderbeest.net>
-Description:
-		Some regulator directories will contain a field called
-		over_voltage_warn.  This indicates if the device reports an
-		over-voltage warning (1) or not (0).
-
-What:		/sys/class/regulator/.../over_temp_warn
-Date:		April 2022
-KernelVersion:	5.18
-Contact:	Zev Weiss <zev@bewilderbeest.net>
-Description:
-		Some regulator directories will contain a field called
-		over_temp_warn.  This indicates if the device reports an
-		over-temperature warning (1) or not (0).

Documentation/ABI/testing/sysfs-class-rtrs-client

@@ -78,7 +78,7 @@ What:		/sys/class/rtrs-client/<session-name>/paths/<src@dst>/hca_name
 Date:		Feb 2020
 KernelVersion:	5.7
 Contact:	Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com>
-Description:	RO, Contains the name of HCA the connection established on.
+Description:	RO, Contains the the name of HCA the connection established on.
 
 What:		/sys/class/rtrs-client/<session-name>/paths/<src@dst>/hca_port
 Date:		Feb 2020

Documentation/ABI/testing/sysfs-class-rtrs-server

@@ -24,7 +24,7 @@ What:		/sys/class/rtrs-server/<session-name>/paths/<src@dst>/hca_name
 Date:		Feb 2020
 KernelVersion:	5.7
 Contact:	Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com>
-Description:	RO, Contains the name of HCA the connection established on.
+Description:	RO, Contains the the name of HCA the connection established on.
 
 What:		/sys/class/rtrs-server/<session-name>/paths/<src@dst>/hca_port
 Date:		Feb 2020

Documentation/ABI/testing/sysfs-class-typec

@@ -141,14 +141,6 @@ Description:
 		- "reverse": CC2 orientation
 		- "unknown": Orientation cannot be determined.
 
-What:		/sys/class/typec/<port>/select_usb_power_delivery
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Lists the USB Power Delivery Capabilities that the port can
-		advertise to the partner. The currently used capabilities are in
-		brackets. Selection happens by writing to the file.
-
 USB Type-C partner devices (eg. /sys/class/typec/port0-partner/)
 
 What:		/sys/class/typec/<port>-partner/accessory_mode

Documentation/ABI/testing/sysfs-class-usb_power_delivery

@@ -1,240 +0,0 @@
-What:		/sys/class/usb_power_delivery
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Directory for USB Power Delivery devices.
-
-What:		/sys/class/usb_power_delivery/.../revision
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		File showing the USB Power Delivery Specification Revision used
-		in communication.
-
-What:		/sys/class/usb_power_delivery/.../version
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		This is an optional attribute file showing the version of the
-		specific revision of the USB Power Delivery Specification. In
-		most cases the specification version is not known and the file
-		is not available.
-
-What:		/sys/class/usb_power_delivery/.../source-capabilities
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		The source capabilities message "Source_Capabilities" contains a
-		set of Power Data Objects (PDO), each representing a type of
-		power supply. The order of the PDO objects is defined in the USB
-		Power Delivery Specification. Each PDO - power supply - will
-		have its own device, and the PDO device name will start with the
-		object position number as the first character followed by the
-		power supply type name (":" as delimiter).
-
-			/sys/class/usb_power_delivery/.../source_capabilities/<position>:<type>
-
-What:		/sys/class/usb_power_delivery/.../sink-capabilities
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		The sink capability message "Sink_Capabilities" contains a set
-		of Power Data Objects (PDO) just like with source capabilities,
-		but instead of describing the power capabilities, these objects
-		describe the power requirements.
-
-		The order of the objects in the sink capability message is the
-		same as with the source capabilities message.
-
-Fixed Supplies
-
-What:		/sys/class/usb_power_delivery/.../<capability>/<position>:fixed_supply
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Devices containing the attributes (the bit fields) defined for
-		Fixed Supplies.
-
-		The device "1:fixed_supply" is special. USB Power Delivery
-		Specification dictates that the first PDO (at object position
-		1), and the only mandatory PDO, is always the vSafe5V Fixed
-		Supply Object. vSafe5V Object has additional fields defined for
-		it that the other Fixed Supply Objects do not have and that are
-		related to the USB capabilities rather than power capabilities.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/dual_role_power
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		This file contains boolean value that tells does the device
-		support both source and sink power roles.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/usb_suspend_supported
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		This file shows the value of the USB Suspend Supported bit in
-		vSafe5V Fixed Supply Object. If the bit is set then the device
-		will follow the USB 2.0 and USB 3.2 rules for suspend and
-		resume.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/unconstrained_power
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		This file shows the value of the Unconstrained Power bit in
-		vSafe5V Fixed Supply Object. The bit is set when an external
-		source of power, powerful enough to power the entire system on
-		its own, is available for the device.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/usb_communication_capable
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		This file shows the value of the USB Communication Capable bit in
-		vSafe5V Fixed Supply Object.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/dual_role_data
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		This file shows the value of the Dual-Role Data bit in vSafe5V
-		Fixed Supply Object. Dual role data means ability act as both
-		USB host and USB device.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/unchunked_extended_messages_supported
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		This file shows the value of the Unchunked Extended Messages
-		Supported bit in vSafe5V Fixed Supply Object.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/<position>:fixed_supply/voltage
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		The voltage the supply supports in millivolts.
-
-What:		/sys/class/usb_power_delivery/.../source-capabilities/<position>:fixed_supply/maximum_current
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Maximum current of the fixed source supply in milliamperes.
-
-What:		/sys/class/usb_power_delivery/.../sink-capabilities/<position>:fixed_supply/operational_current
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Operational current of the sink in milliamperes.
-
-What:		/sys/class/usb_power_delivery/.../sink-capabilities/<position>:fixed_supply/fast_role_swap_current
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		This file contains the value of the "Fast Role Swap USB Type-C
-		Current" field that tells the current level the sink requires
-		after a Fast Role Swap.
-		0 - Fast Swap not supported"
-		1 - Default USB Power"
-		2 - 1.5A@5V"
-		3 - 3.0A@5V"
-
-Variable Supplies
-
-What:		/sys/class/usb_power_delivery/.../<capability>/<position>:variable_supply
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Variable Power Supply PDO.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/<position>:variable_supply/maximum_voltage
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Maximum Voltage in millivolts.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/<position>:variable_supply/minimum_voltage
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Minimum Voltage in millivolts.
-
-What:		/sys/class/usb_power_delivery/.../source-capabilities/<position>:variable_supply/maximum_current
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		The maximum current in milliamperes that the source can supply
-		at the given Voltage range.
-
-What:		/sys/class/usb_power_delivery/.../sink-capabilities/<position>:variable_supply/operational_current
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		The operational current in milliamperes that the sink requires
-		at the given Voltage range.
-
-Battery Supplies
-
-What:		/sys/class/usb_power_delivery/.../<capability>/<position>:battery
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Battery PDO.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/<position>:battery/maximum_voltage
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Maximum Voltage in millivolts.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/<position>:battery/minimum_voltage
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Minimum Voltage in millivolts.
-
-What:		/sys/class/usb_power_delivery/.../source-capabilities/<position>:battery/maximum_power
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Maximum allowable Power in milliwatts.
-
-What:		/sys/class/usb_power_delivery/.../sink-capabilities/<position>:battery/operational_power
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		The operational power that the sink requires at the given
-		voltage range.
-
-Standard Power Range (SPR) Programmable Power Supplies
-
-What:		/sys/class/usb_power_delivery/.../<capability>/<position>:programmable_supply
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Programmable Power Supply (PPS) Augmented PDO (APDO).
-
-What:		/sys/class/usb_power_delivery/.../<capability>/<position>:programmable_supply/maximum_voltage
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Maximum Voltage in millivolts.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/<position>:programmable_supply/minimum_voltage
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Minimum Voltage in millivolts.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/<position>:programmable_supply/maximum_current
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Maximum Current in milliamperes.
-
-What:		/sys/class/usb_power_delivery/.../source-capabilities/<position>:programmable_supply/pps_power_limited
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		The PPS Power Limited bit indicates whether or not the source
-		supply will exceed the rated output power if requested.

Documentation/ABI/testing/sysfs-class-vduse

@@ -1,33 +0,0 @@
-What:		/sys/class/vduse/
-Date:		Oct 2021
-KernelVersion:	5.15
-Contact:	Yongji Xie <xieyongji@bytedance.com>
-Description:
-		The vduse/ class sub-directory belongs to the VDUSE
-		framework and provides a sysfs interface for configuring
-		VDUSE devices.
-
-What:		/sys/class/vduse/control/
-Date:		Oct 2021
-KernelVersion:	5.15
-Contact:	Yongji Xie <xieyongji@bytedance.com>
-Description:
-		This directory entry is created for the control device
-		of VDUSE framework.
-
-What:		/sys/class/vduse/<device-name>/
-Date:		Oct 2021
-KernelVersion:	5.15
-Contact:	Yongji Xie <xieyongji@bytedance.com>
-Description:
-		This directory entry is created when a VDUSE device is
-		created via the control device.
-
-What:		/sys/class/vduse/<device-name>/msg_timeout
-Date:		Oct 2021
-KernelVersion:	5.15
-Contact:	Yongji Xie <xieyongji@bytedance.com>
-Description:
-		(RW) The timeout (in seconds) for waiting for the control
-		message's response from userspace. Default value is 30s.
-		Writing a '0' to the file means to disable the timeout.

Documentation/ABI/testing/sysfs-devices-hisi_ptt

@@ -1,61 +0,0 @@
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune
-Date:		October 2022
-KernelVersion:	6.1
-Contact:	Yicong Yang <yangyicong@hisilicon.com>
-Description:	This directory contains files for tuning the PCIe link
-		parameters(events). Each file is named after the event
-		of the PCIe link.
-
-		See Documentation/trace/hisi-ptt.rst for more information.
-
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_cpl
-Date:		October 2022
-KernelVersion:	6.1
-Contact:	Yicong Yang <yangyicong@hisilicon.com>
-Description:	(RW) Controls the weight of Tx completion TLPs, which influence
-		the proportion of outbound completion TLPs on the PCIe link.
-		The available tune data is [0, 1, 2]. Writing a negative value
-		will return an error, and out of range values will be converted
-		to 2. The value indicates a probable level of the event.
-
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_np
-Date:		October 2022
-KernelVersion:	6.1
-Contact:	Yicong Yang <yangyicong@hisilicon.com>
-Description:	(RW) Controls the weight of Tx non-posted TLPs, which influence
-		the proportion of outbound non-posted TLPs on the PCIe link.
-		The available tune data is [0, 1, 2]. Writing a negative value
-		will return an error, and out of range values will be converted
-		to 2. The value indicates a probable level of the event.
-
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_p
-Date:		October 2022
-KernelVersion:	6.1
-Contact:	Yicong Yang <yangyicong@hisilicon.com>
-Description:	(RW) Controls the weight of Tx posted TLPs, which influence the
-		proportion of outbound posted TLPs on the PCIe link.
-		The available tune data is [0, 1, 2]. Writing a negative value
-		will return an error, and out of range values will be converted
-		to 2. The value indicates a probable level of the event.
-
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/rx_alloc_buf_level
-Date:		October 2022
-KernelVersion:	6.1
-Contact:	Yicong Yang <yangyicong@hisilicon.com>
-Description:	(RW) Control the allocated buffer watermark for inbound packets.
-		The packets will be stored in the buffer first and then transmitted
-		either when the watermark reached or when timed out.
-		The available tune data is [0, 1, 2]. Writing a negative value
-		will return an error, and out of range values will be converted
-		to 2. The value indicates a probable level of the event.
-
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/tx_alloc_buf_level
-Date:		October 2022
-KernelVersion:	6.1
-Contact:	Yicong Yang <yangyicong@hisilicon.com>
-Description:	(RW) Control the allocated buffer watermark of outbound packets.
-		The packets will be stored in the buffer first and then transmitted
-		either when the watermark reached or when timed out.
-		The available tune data is [0, 1, 2]. Writing a negative value
-		will return an error, and out of range values will be converted
-		to 2. The value indicates a probable level of the event.

Documentation/ABI/testing/sysfs-devices-physical_location

@@ -1,42 +0,0 @@
-What:		/sys/devices/.../physical_location
-Date:		March 2022
-Contact:	Won Chung <wonchung@google.com>
-Description:
-		This directory contains information on physical location of
-		the device connection point with respect to the system's
-		housing.
-
-What:		/sys/devices/.../physical_location/panel
-Date:		March 2022
-Contact:	Won Chung <wonchung@google.com>
-Description:
-		Describes which panel surface of the system’s housing the
-		device connection point resides on.
-
-What:		/sys/devices/.../physical_location/vertical_position
-Date:		March 2022
-Contact:	Won Chung <wonchung@google.com>
-Description:
-		Describes vertical position of the device connection point on
-		the panel surface.
-
-What:		/sys/devices/.../physical_location/horizontal_position
-Date:		March 2022
-Contact:	Won Chung <wonchung@google.com>
-Description:
-		Describes horizontal position of the device connection point on
-		the panel surface.
-
-What:		/sys/devices/.../physical_location/dock
-Date:		March 2022
-Contact:	Won Chung <wonchung@google.com>
-Description:
-		"Yes" if the device connection point resides in a docking
-		station or a port replicator. "No" otherwise.
-
-What:		/sys/devices/.../physical_location/lid
-Date:		March 2022
-Contact:	Won Chung <wonchung@google.com>
-Description:
-		"Yes" if the device connection point resides on the lid of
-		laptop system. "No" otherwise.

Documentation/ABI/testing/sysfs-devices-platform-ACPI-TAD

@@ -74,7 +74,7 @@ Description:
 
 		Reads also cause the AC alarm timer status to be reset.
 
-		Another way to reset the status of the AC alarm timer is to
+		Another way to reset the the status of the AC alarm timer is to
 		write (the number) 0 to this file.
 
 		If the status return value indicates that the timer has expired,

Documentation/ABI/testing/sysfs-devices-platform-soc-ipa

@@ -46,69 +46,33 @@ Description:
 		that is supported by the hardware.  The possible values
 		are "MAPv4" or "MAPv5".
 
-What:		.../XXXXXXX.ipa/endpoint_id/
-Date:		July 2022
-KernelVersion:	v5.19
-Contact:	Alex Elder <elder@kernel.org>
-Description:
-		The .../XXXXXXX.ipa/endpoint_id/ directory contains
-		attributes that define IDs associated with IPA
-		endpoints.  The "rx" or "tx" in an endpoint name is
-		from the perspective of the AP.  An endpoint ID is a
-		small unsigned integer.
-
-What:		.../XXXXXXX.ipa/endpoint_id/modem_rx
-Date:		July 2022
-KernelVersion:	v5.19
-Contact:	Alex Elder <elder@kernel.org>
-Description:
-		The .../XXXXXXX.ipa/endpoint_id/modem_rx file contains
-		the ID of the AP endpoint on which packets originating
-		from the embedded modem are received.
-
-What:		.../XXXXXXX.ipa/endpoint_id/modem_tx
-Date:		July 2022
-KernelVersion:	v5.19
-Contact:	Alex Elder <elder@kernel.org>
-Description:
-		The .../XXXXXXX.ipa/endpoint_id/modem_tx file contains
-		the ID of the AP endpoint on which packets destined
-		for the embedded modem are sent.
-
-What:		.../XXXXXXX.ipa/endpoint_id/monitor_rx
-Date:		July 2022
-KernelVersion:	v5.19
-Contact:	Alex Elder <elder@kernel.org>
-Description:
-		The .../XXXXXXX.ipa/endpoint_id/monitor_rx file contains
-		the ID of the AP endpoint on which IPA "monitor" data is
-		received.  The monitor endpoint supplies replicas of
-		packets that enter the IPA hardware for processing.
-		Each replicated packet is preceded by a fixed-size "ODL"
-		header (see .../XXXXXXX.ipa/feature/monitor, above).
-		Large packets are truncated, to reduce the bandwidth
-		required to provide the monitor function.
-
 What:		.../XXXXXXX.ipa/modem/
 Date:		June 2021
 KernelVersion:	v5.14
 Contact:	Alex Elder <elder@kernel.org>
 Description:
-		The .../XXXXXXX.ipa/modem/ directory contains attributes
-		describing properties of the modem embedded in the SoC.
+		The .../XXXXXXX.ipa/modem/ directory contains a set of
+		attributes describing properties of the modem execution
+		environment reachable by the IPA hardware.
 
 What:		.../XXXXXXX.ipa/modem/rx_endpoint_id
 Date:		June 2021
 KernelVersion:	v5.14
 Contact:	Alex Elder <elder@kernel.org>
 Description:
-		The .../XXXXXXX.ipa/modem/rx_endpoint_id file duplicates
-		the value found in .../XXXXXXX.ipa/endpoint_id/modem_rx.
+		The .../XXXXXXX.ipa/feature/rx_endpoint_id file contains
+		the AP endpoint ID that receives packets originating from
+		the modem execution environment.  The "rx" is from the
+		perspective of the AP; this endpoint is considered an "IPA
+		producer".  An endpoint ID is a small unsigned integer.
 
 What:		.../XXXXXXX.ipa/modem/tx_endpoint_id
 Date:		June 2021
 KernelVersion:	v5.14
 Contact:	Alex Elder <elder@kernel.org>
 Description:
-		The .../XXXXXXX.ipa/modem/tx_endpoint_id file duplicates
-		the value found in .../XXXXXXX.ipa/endpoint_id/modem_tx.
+		The .../XXXXXXX.ipa/feature/tx_endpoint_id file contains
+		the AP endpoint ID used to transmit packets destined for
+		the modem execution environment.  The "tx" is from the
+		perspective of the AP; this endpoint is considered an "IPA
+		consumer".  An endpoint ID is a small unsigned integer.

Documentation/ABI/testing/sysfs-devices-power

@@ -303,5 +303,5 @@ Date:		Apr 2010
 Contact:	Dominik Brodowski <linux@dominikbrodowski.net>
 Description:
 		Reports the runtime PM children usage count of a device, or
-		0 if the children will be ignored.
+		0 if the the children will be ignored.
 

Documentation/ABI/testing/sysfs-devices-soc

@@ -1,6 +1,6 @@
 What:		/sys/devices/socX
 Date:		January 2012
-contact:	Lee Jones <lee@kernel.org>
+contact:	Lee Jones <lee.jones@linaro.org>
 Description:
 		The /sys/devices/ directory contains a sub-directory for each
 		System-on-Chip (SoC) device on a running platform. Information
@@ -14,14 +14,14 @@ Description:
 
 What:		/sys/devices/socX/machine
 Date:		January 2012
-contact:	Lee Jones <lee@kernel.org>
+contact:	Lee Jones <lee.jones@linaro.org>
 Description:
 		Read-only attribute common to all SoCs. Contains the SoC machine
 		name (e.g. Ux500).
 
 What:		/sys/devices/socX/family
 Date:		January 2012
-contact:	Lee Jones <lee@kernel.org>
+contact:	Lee Jones <lee.jones@linaro.org>
 Description:
 		Read-only attribute common to all SoCs. Contains SoC family name
 		(e.g. DB8500).
@@ -59,7 +59,7 @@ Description:
 
 What:		/sys/devices/socX/soc_id
 Date:		January 2012
-contact:	Lee Jones <lee@kernel.org>
+contact:	Lee Jones <lee.jones@linaro.org>
 Description:
 		Read-only attribute supported by most SoCs. In the case of
 		ST-Ericsson's chips this contains the SoC serial number.
@@ -72,21 +72,21 @@ Description:
 
 What:		/sys/devices/socX/revision
 Date:		January 2012
-contact:	Lee Jones <lee@kernel.org>
+contact:	Lee Jones <lee.jones@linaro.org>
 Description:
 		Read-only attribute supported by most SoCs. Contains the SoC's
 		manufacturing revision number.
 
 What:		/sys/devices/socX/process
 Date:		January 2012
-contact:	Lee Jones <lee@kernel.org>
+contact:	Lee Jones <lee.jones@linaro.org>
 Description:
 		Read-only attribute supported ST-Ericsson's silicon. Contains the
 		the process by which the silicon chip was manufactured.
 
 What:		/sys/bus/soc
 Date:		January 2012
-contact:	Lee Jones <lee@kernel.org>
+contact:	Lee Jones <lee.jones@linaro.org>
 Description:
 		The /sys/bus/soc/ directory contains the usual sub-folders
 		expected under most buses. /sys/bus/soc/devices is of particular

Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -67,7 +67,8 @@ Description:	Discover NUMA node a CPU belongs to
 		/sys/devices/system/cpu/cpu42/node2 -> ../../node/node2
 
 
-What:		/sys/devices/system/cpu/cpuX/topology/core_siblings
+What:		/sys/devices/system/cpu/cpuX/topology/core_id
+		/sys/devices/system/cpu/cpuX/topology/core_siblings
 		/sys/devices/system/cpu/cpuX/topology/core_siblings_list
 		/sys/devices/system/cpu/cpuX/topology/physical_package_id
 		/sys/devices/system/cpu/cpuX/topology/thread_siblings
@@ -83,6 +84,10 @@ Description:	CPU topology files that describe a logical CPU's relationship
 
 		Briefly, the files above are:
 
+		core_id: the CPU core ID of cpuX. Typically it is the
+		hardware platform's identifier (rather than the kernel's).
+		The actual value is architecture and platform dependent.
+
 		core_siblings: internal kernel map of cpuX's hardware threads
 		within the same physical_package_id.
 
@@ -296,7 +301,7 @@ Description:	Processor frequency boosting control
 
 		This switch controls the boost setting for the whole system.
 		Boosting allows the CPU and the firmware to run at a frequency
-		beyond its nominal limit.
+		beyond it's nominal limit.
 
 		More details can be found in
 		Documentation/admin-guide/pm/cpufreq.rst
@@ -488,13 +493,12 @@ What:		/sys/devices/system/cpu/cpuX/regs/
 		/sys/devices/system/cpu/cpuX/regs/identification/
 		/sys/devices/system/cpu/cpuX/regs/identification/midr_el1
 		/sys/devices/system/cpu/cpuX/regs/identification/revidr_el1
-		/sys/devices/system/cpu/cpuX/regs/identification/smidr_el1
 Date:		June 2016
 Contact:	Linux ARM Kernel Mailing list <linux-arm-kernel@lists.infradead.org>
 Description:	AArch64 CPU registers
 
 		'identification' directory exposes the CPU ID registers for
-		identifying model and revision of the CPU and SMCU.
+		identifying model and revision of the CPU.
 
 What:		/sys/devices/system/cpu/aarch32_el0
 Date:		May 2021
@@ -522,8 +526,6 @@ What:		/sys/devices/system/cpu/vulnerabilities
 		/sys/devices/system/cpu/vulnerabilities/srbds
 		/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
 		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
-		/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
-		/sys/devices/system/cpu/vulnerabilities/retbleed
 Date:		January 2018
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	Information about CPU vulnerabilities

Documentation/ABI/testing/sysfs-devices-vfio-dev

@@ -1,8 +0,0 @@
-What:		 /sys/.../<device>/vfio-dev/vfioX/
-Date:		 September 2022
-Contact:	 Yi Liu <yi.l.liu@intel.com>
-Description:
-		 This directory is created when the device is bound to a
-		 vfio driver. The layout under this directory matches what
-		 exists for a standard 'struct device'. 'X' is a unique
-		 index marking this device in vfio.

Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator

@@ -26,6 +26,6 @@ Description:	Read/write the current state of DDR Backup Mode, which controls
 		     DDR Backup Mode must be explicitly enabled by the user,
 		     to invoke step 1.
 
-		See also Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml.
+		See also Documentation/devicetree/bindings/mfd/bd9571mwv.txt.
 Users:		User space applications for embedded boards equipped with a
 		BD9571MWV PMIC.

Documentation/ABI/testing/sysfs-driver-ccp

@@ -1,87 +0,0 @@
-What:		/sys/bus/pci/devices/<BDF>/fused_part
-Date:		June 2022
-KernelVersion:	5.19
-Contact:	mario.limonciello@amd.com
-Description:
-		The /sys/bus/pci/devices/<BDF>/fused_part file reports
-		whether the CPU or APU has been fused to prevent tampering.
-		0: Not fused
-		1: Fused
-
-What:		/sys/bus/pci/devices/<BDF>/debug_lock_on
-Date:		June 2022
-KernelVersion:	5.19
-Contact:	mario.limonciello@amd.com
-Description:
-		The /sys/bus/pci/devices/<BDF>/debug_lock_on reports
-		whether the AMD CPU or APU has been unlocked for debugging.
-		Possible values:
-		0: Not locked
-		1: Locked
-
-What:		/sys/bus/pci/devices/<BDF>/tsme_status
-Date:		June 2022
-KernelVersion:	5.19
-Contact:	mario.limonciello@amd.com
-Description:
-		The /sys/bus/pci/devices/<BDF>/tsme_status file reports
-		the status of transparent secure memory encryption on AMD systems.
-		Possible values:
-		0: Not active
-		1: Active
-
-What:		/sys/bus/pci/devices/<BDF>/anti_rollback_status
-Date:		June 2022
-KernelVersion:	5.19
-Contact:	mario.limonciello@amd.com
-Description:
-		The /sys/bus/pci/devices/<BDF>/anti_rollback_status file reports
-		whether the PSP is enforcing rollback protection.
-		Possible values:
-		0: Not enforcing
-		1: Enforcing
-
-What:		/sys/bus/pci/devices/<BDF>/rpmc_production_enabled
-Date:		June 2022
-KernelVersion:	5.19
-Contact:	mario.limonciello@amd.com
-Description:
-		The /sys/bus/pci/devices/<BDF>/rpmc_production_enabled file reports
-		whether Replay Protected Monotonic Counter support has been enabled.
-		Possible values:
-		0: Not enabled
-		1: Enabled
-
-What:		/sys/bus/pci/devices/<BDF>/rpmc_spirom_available
-Date:		June 2022
-KernelVersion:	5.19
-Contact:	mario.limonciello@amd.com
-Description:
-		The /sys/bus/pci/devices/<BDF>/rpmc_spirom_available file reports
-		whether an Replay Protected Monotonic Counter supported SPI is installed
-		on the system.
-		Possible values:
-		0: Not present
-		1: Present
-
-What:		/sys/bus/pci/devices/<BDF>/hsp_tpm_available
-Date:		June 2022
-KernelVersion:	5.19
-Contact:	mario.limonciello@amd.com
-Description:
-		The /sys/bus/pci/devices/<BDF>/hsp_tpm_available file reports
-		whether the HSP TPM has been activated.
-		Possible values:
-		0: Not activated or present
-		1: Activated
-
-What:		/sys/bus/pci/devices/<BDF>/rom_armor_enforced
-Date:		June 2022
-KernelVersion:	5.19
-Contact:	mario.limonciello@amd.com
-Description:
-		The /sys/bus/pci/devices/<BDF>/rom_armor_enforced file reports
-		whether RomArmor SPI protection is enforced.
-		Possible values:
-		0: Not enforced
-		1: Enforced

Documentation/ABI/testing/sysfs-driver-chromeos-acpi

@@ -1,137 +0,0 @@
-What:		/sys/bus/platform/devices/GGL0001:*/BINF.2
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns active EC firmware of current boot (boolean).
-
-		== ===============================
-		0  Read only (recovery) firmware.
-		1  Rewritable firmware.
-		== ===============================
-
-What:		/sys/bus/platform/devices/GGL0001:*/BINF.3
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns main firmware type for current boot (integer).
-
-		== =====================================
-		0  Recovery.
-		1  Normal.
-		2  Developer.
-		3  Netboot (factory installation only).
-		== =====================================
-
-What:		/sys/bus/platform/devices/GGL0001:*/CHSW
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns switch position for Chrome OS specific hardware
-		switches when the firmware is booted (integer).
-
-		==== ===========================================
-		0    No changes.
-		2    Recovery button was pressed.
-		4    Recovery button was pressed (EC firmware).
-		32   Developer switch was enabled.
-		512  Firmware write protection was disabled.
-		==== ===========================================
-
-What:		/sys/bus/platform/devices/GGL0001:*/FMAP
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns physical memory address of the start of the main
-		processor firmware flashmap.
-
-What:		/sys/bus/platform/devices/GGL0001:*/FRID
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns firmware version for the read-only portion of the
-		main processor firmware.
-
-What:		/sys/bus/platform/devices/GGL0001:*/FWID
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns firmware version for the rewritable portion of the
-		main processor firmware.
-
-What:		/sys/bus/platform/devices/GGL0001:*/GPIO.X/GPIO.0
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns type of the GPIO signal for the Chrome OS specific
-		GPIO assignments (integer).
-
-		=========== ==================================
-		1           Recovery button.
-		2           Developer mode switch.
-		3           Firmware write protection switch.
-		256 to 511  Debug header GPIO 0 to GPIO 255.
-		=========== ==================================
-
-What:		/sys/bus/platform/devices/GGL0001:*/GPIO.X/GPIO.1
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns signal attributes of the GPIO signal (integer bitfield).
-
-		== =======================
-		0  Signal is active low.
-		1  Signal is active high.
-		== =======================
-
-What:		/sys/bus/platform/devices/GGL0001:*/GPIO.X/GPIO.2
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns the GPIO number on the specified GPIO
-		controller.
-
-What:		/sys/bus/platform/devices/GGL0001:*/GPIO.X/GPIO.3
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns name of the GPIO controller.
-
-What:		/sys/bus/platform/devices/GGL0001:*/HWID
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns hardware ID for the Chromebook.
-
-What:		/sys/bus/platform/devices/GGL0001:*/MECK
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns the SHA-1 or SHA-256 hash that is read out of the
-		Management Engine extended registers during boot. The hash
-		is exported via ACPI so the OS can verify that the Management
-		Engine firmware has not changed. If Management Engine is not
-		present, or if the firmware was unable to read the extended registers, this buffer size can be zero.
-
-What:		/sys/bus/platform/devices/GGL0001:*/VBNV.0
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns offset in CMOS bank 0 of the verified boot non-volatile
-		storage block, counting from the first writable CMOS byte
-		(that is, 'offset = 0' is the byte following the 14 bytes of
-		clock data).
-
-What:		/sys/bus/platform/devices/GGL0001:*/VBNV.1
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Return the size in bytes of the verified boot non-volatile
-		storage block.
-
-What:		/sys/bus/platform/devices/GGL0001:*/VDAT
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns the verified boot data block shared between the
-		firmware verification step and the kernel verification step
-		(binary).

Documentation/ABI/testing/sysfs-driver-habanalabs

@@ -16,7 +16,7 @@ Description:    Version of the application running on the device's CPU
 
 What:           /sys/class/habanalabs/hl<n>/clk_max_freq_mhz
 Date:           Jun 2019
-KernelVersion:  5.7
+KernelVersion:  not yet upstreamed
 Contact:        ogabbay@kernel.org
 Description:    Allows the user to set the maximum clock frequency, in MHz.
                 The device clock might be set to lower value than the maximum.
@@ -26,7 +26,7 @@ Description:    Allows the user to set the maximum clock frequency, in MHz.
 
 What:           /sys/class/habanalabs/hl<n>/clk_cur_freq_mhz
 Date:           Jun 2019
-KernelVersion:  5.7
+KernelVersion:  not yet upstreamed
 Contact:        ogabbay@kernel.org
 Description:    Displays the current frequency, in MHz, of the device clock.
                 This property is valid only for the Gaudi ASIC family
@@ -176,12 +176,6 @@ KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
 Description:    Version of the device's preboot F/W code
 
-What:           /sys/class/habanalabs/hl<n>/security_enabled
-Date:           Oct 2022
-KernelVersion:  6.1
-Contact:        obitton@habana.ai
-Description:    Displays the device's security status
-
 What:           /sys/class/habanalabs/hl<n>/soft_reset
 Date:           Jan 2019
 KernelVersion:  5.1
@@ -236,6 +230,6 @@ Description:    Version of the u-boot running on the device's CPU
 
 What:           /sys/class/habanalabs/hl<n>/vrm_ver
 Date:           Jan 2022
-KernelVersion:  5.17
+KernelVersion:  not yet upstreamed
 Contact:        ogabbay@kernel.org
 Description:    Version of the Device's Voltage Regulator Monitor F/W code. N/A to GOYA and GAUDI

Documentation/ABI/testing/sysfs-driver-intel-m10-bmc-sec-update

@@ -1,61 +0,0 @@
-What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/sr_root_entry_hash
-Date:		Sep 2022
-KernelVersion:	5.20
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	Read only. Returns the root entry hash for the static
-		region if one is programmed, else it returns the
-		string: "hash not programmed".  This file is only
-		visible if the underlying device supports it.
-		Format: string.
-
-What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/pr_root_entry_hash
-Date:		Sep 2022
-KernelVersion:	5.20
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	Read only. Returns the root entry hash for the partial
-		reconfiguration region if one is programmed, else it
-		returns the string: "hash not programmed".  This file
-		is only visible if the underlying device supports it.
-		Format: string.
-
-What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/bmc_root_entry_hash
-Date:		Sep 2022
-KernelVersion:	5.20
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	Read only. Returns the root entry hash for the BMC image
-		if one is programmed, else it returns the string:
-		"hash not programmed".  This file is only visible if the
-		underlying device supports it.
-		Format: string.
-
-What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/sr_canceled_csks
-Date:		Sep 2022
-KernelVersion:	5.20
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	Read only. Returns a list of indices for canceled code
-		signing keys for the static region. The standard bitmap
-		list format is used (e.g. "1,2-6,9").
-
-What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/pr_canceled_csks
-Date:		Sep 2022
-KernelVersion:	5.20
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	Read only. Returns a list of indices for canceled code
-		signing keys for the partial reconfiguration region. The
-		standard bitmap list format is used (e.g. "1,2-6,9").
-
-What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/bmc_canceled_csks
-Date:		Sep 2022
-KernelVersion:	5.20
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	Read only. Returns a list of indices for canceled code
-		signing keys for the BMC.  The standard bitmap list format
-		is used (e.g. "1,2-6,9").
-
-What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/flash_count
-Date:		Sep 2022
-KernelVersion:	5.20
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	Read only. Returns number of times the secure update
-		staging area has been flashed.
-		Format: "%u".

Documentation/ABI/testing/sysfs-driver-qat

@@ -1,49 +0,0 @@
-What:		/sys/bus/pci/devices/<BDF>/qat/state
-Date:		June 2022
-KernelVersion:	5.20
-Contact:	qat-linux@intel.com
-Description:	(RW) Reports the current state of the QAT device. Write to
-		the file to start or stop the device.
-
-		The values are:
-
-		* up: the device is up and running
-		* down: the device is down
-
-
-		It is possible to transition the device from up to down only
-		if the device is up and vice versa.
-
-		This attribute is only available for qat_4xxx devices.
-
-What:		/sys/bus/pci/devices/<BDF>/qat/cfg_services
-Date:		June 2022
-KernelVersion:	5.20
-Contact:	qat-linux@intel.com
-Description:	(RW) Reports the current configuration of the QAT device.
-		Write to the file to change the configured services.
-
-		The values are:
-
-		* sym;asym: the device is configured for running crypto
-		  services
-		* dc: the device is configured for running compression services
-
-		It is possible to set the configuration only if the device
-		is in the `down` state (see /sys/bus/pci/devices/<BDF>/qat/state)
-
-		The following example shows how to change the configuration of
-		a device configured for running crypto services in order to
-		run data compression::
-
-			# cat /sys/bus/pci/devices/<BDF>/qat/state
-			up
-			# cat /sys/bus/pci/devices/<BDF>/qat/cfg_services
-			sym;asym
-			# echo down > /sys/bus/pci/devices/<BDF>/qat/state
-			# echo dc > /sys/bus/pci/devices/<BDF>/qat/cfg_services
-			# echo up > /sys/bus/pci/devices/<BDF>/qat/state
-			# cat /sys/bus/pci/devices/<BDF>/qat/cfg_services
-			dc
-
-		This attribute is only available for qat_4xxx devices.

Documentation/ABI/testing/sysfs-driver-ufs

@@ -1417,15 +1417,6 @@ Description:	This node is used to set or display whether UFS WriteBooster is
 		platform that doesn't support UFSHCD_CAP_CLK_SCALING, we can
 		disable/enable WriteBooster through this sysfs node.
 
-What:		/sys/bus/platform/drivers/ufshcd/*/enable_wb_buf_flush
-What:		/sys/bus/platform/devices/*.ufs/enable_wb_buf_flush
-Date:		July 2022
-Contact:	Jinyoung Choi <j-young.choi@samsung.com>
-Description:	This entry shows the status of WriteBooster buffer flushing
-		and it can be used to enable or disable the flushing.
-		If flushing is enabled, the device executes the flush
-		operation when the command queue is empty.
-
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/hpb_version
 What:		/sys/bus/platform/devices/*.ufs/device_descriptor/hpb_version
 Date:		June 2021
@@ -1527,7 +1518,7 @@ Description:	This entry shows the number of reads that cannot be changed to
 
 		The file is read only.
 
-What:		/sys/class/scsi_device/*/device/hpb_stats/rcmd_noti_cnt
+What:		/sys/class/scsi_device/*/device/hpb_stats/rb_noti_cnt
 Date:		June 2021
 Contact:	Daejun Park <daejun7.park@samsung.com>
 Description:	This entry shows the number of response UPIUs that has
@@ -1535,23 +1526,19 @@ Description:	This entry shows the number of response UPIUs that has
 
 		The file is read only.
 
-What:		/sys/class/scsi_device/*/device/hpb_stats/rcmd_active_cnt
+What:		/sys/class/scsi_device/*/device/hpb_stats/rb_active_cnt
 Date:		June 2021
 Contact:	Daejun Park <daejun7.park@samsung.com>
-Description:	For the HPB device control mode, this entry shows the number of
-        active sub-regions recommended by response UPIUs. For the HPB host control
-        mode, this entry shows the number of active sub-regions recommended by the
-        HPB host control mode heuristic algorithm.
+Description:	This entry shows the number of active sub-regions recommended by
+		response UPIUs.
 
 		The file is read only.
 
-What:		/sys/class/scsi_device/*/device/hpb_stats/rcmd_inactive_cnt
+What:		/sys/class/scsi_device/*/device/hpb_stats/rb_inactive_cnt
 Date:		June 2021
 Contact:	Daejun Park <daejun7.park@samsung.com>
-Description:	For the HPB device control mode, this entry shows the number of
-        inactive regions recommended by response UPIUs. For the HPB host control
-        mode, this entry shows the number of inactive regions recommended by the
-        HPB host control mode heuristic algorithm.
+Description:	This entry shows the number of inactive regions recommended by
+		response UPIUs.
 
 		The file is read only.
 
@@ -1600,43 +1587,6 @@ Description:	This entry shows the status of HPB.
 
 		The file is read only.
 
-Contact:	Daniil Lunev <dlunev@chromium.org>
-What:		/sys/bus/platform/drivers/ufshcd/*/capabilities/
-What:		/sys/bus/platform/devices/*.ufs/capabilities/
-Date:		August 2022
-Description:	The group represents the effective capabilities of the
-		host-device pair. i.e. the capabilities which are enabled in the
-		driver for the specific host controller, supported by the host
-		controller and are supported and/or have compatible
-		configuration on the device side.
-
-Contact:	Daniil Lunev <dlunev@chromium.org>
-What:		/sys/bus/platform/drivers/ufshcd/*/capabilities/clock_scaling
-What:		/sys/bus/platform/devices/*.ufs/capabilities/clock_scaling
-Date:		August 2022
-Contact:	Daniil Lunev <dlunev@chromium.org>
-Description:	Indicates status of clock scaling.
-
-		== ============================
-		0  Clock scaling is not supported.
-		1  Clock scaling is supported.
-		== ============================
-
-		The file is read only.
-
-What:		/sys/bus/platform/drivers/ufshcd/*/capabilities/write_booster
-What:		/sys/bus/platform/devices/*.ufs/capabilities/write_booster
-Date:		August 2022
-Contact:	Daniil Lunev <dlunev@chromium.org>
-Description:	Indicates status of Write Booster.
-
-		== ============================
-		0  Write Booster can not be enabled.
-		1  Write Booster can be enabled.
-		== ============================
-
-		The file is read only.
-
 What:		/sys/class/scsi_device/*/device/hpb_param_sysfs/activation_thld
 Date:		February 2021
 Contact:	Avri Altman <avri.altman@wdc.com>

Documentation/ABI/testing/sysfs-driver-xen-blkback

@@ -29,7 +29,7 @@ Description:
 What:           /sys/module/xen_blkback/parameters/buffer_squeeze_duration_ms
 Date:           December 2019
 KernelVersion:  5.6
-Contact:        Maximilian Heyne <mheyne@amazon.de>
+Contact:        SeongJae Park <sj@kernel.org>
 Description:
                 When memory pressure is reported to blkback this option
                 controls the duration in milliseconds that blkback will not
@@ -39,8 +39,8 @@ Description:
 What:           /sys/module/xen_blkback/parameters/feature_persistent
 Date:           September 2020
 KernelVersion:  5.10
-Contact:        Maximilian Heyne <mheyne@amazon.de>
+Contact:        SeongJae Park <sj@kernel.org>
 Description:
                 Whether to enable the persistent grants feature or not.  Note
-                that this option only takes effect on newly connected backends.
+                that this option only takes effect on newly created backends.
                 The default is Y (enable).

Documentation/ABI/testing/sysfs-driver-xen-blkfront

@@ -12,8 +12,8 @@ Description:
 What:           /sys/module/xen_blkfront/parameters/feature_persistent
 Date:           September 2020
 KernelVersion:  5.10
-Contact:        Maximilian Heyne <mheyne@amazon.de>
+Contact:        SeongJae Park <sj@kernel.org>
 Description:
                 Whether to enable the persistent grants feature or not.  Note
-                that this option only takes effect on newly connected frontends.
+                that this option only takes effect on newly created frontends.
                 The default is Y (enable).

Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg

@@ -12,9 +12,8 @@ Description:
 		configuration data to the guest userspace.
 
 		The authoritative guest-side hardware interface documentation
-		to the fw_cfg device can be found in "docs/specs/fw_cfg.rst"
-		in the QEMU source tree, or online at:
-		https://qemu-project.gitlab.io/qemu/specs/fw_cfg.html
+		to the fw_cfg device can be found in "docs/specs/fw_cfg.txt"
+		in the QEMU source tree.
 
 		**SysFS fw_cfg Interface**
 

Documentation/ABI/testing/sysfs-fs-f2fs

@@ -466,30 +466,6 @@ Description:	Show status of f2fs superblock in real time.
 		0x4000 SBI_IS_FREEZING       freefs is in process
 		====== ===================== =================================
 
-What:		/sys/fs/f2fs/<disk>/stat/cp_status
-Date:		September 2022
-Contact:	"Chao Yu" <chao.yu@oppo.com>
-Description:	Show status of f2fs checkpoint in real time.
-
-		=============================== ==============================
-		cp flag				value
-		CP_UMOUNT_FLAG			0x00000001
-		CP_ORPHAN_PRESENT_FLAG		0x00000002
-		CP_COMPACT_SUM_FLAG		0x00000004
-		CP_ERROR_FLAG			0x00000008
-		CP_FSCK_FLAG			0x00000010
-		CP_FASTBOOT_FLAG		0x00000020
-		CP_CRC_RECOVERY_FLAG		0x00000040
-		CP_NAT_BITS_FLAG		0x00000080
-		CP_TRIMMED_FLAG			0x00000100
-		CP_NOCRC_RECOVERY_FLAG		0x00000200
-		CP_LARGE_NAT_BITMAP_FLAG	0x00000400
-		CP_QUOTA_NEED_FSCK_FLAG		0x00000800
-		CP_DISABLED_FLAG		0x00001000
-		CP_DISABLED_QUICK_FLAG		0x00002000
-		CP_RESIZEFS_FLAG		0x00004000
-		=============================== ==============================
-
 What:		/sys/fs/f2fs/<disk>/ckpt_thread_ioprio
 Date:		January 2021
 Contact:	"Daeho Jeong" <daehojeong@google.com>
@@ -604,33 +580,3 @@ Date:		January 2022
 Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
 Description:	Controls max # of node block writes to be used for roll forward
 		recovery. This can limit the roll forward recovery time.
-
-What:		/sys/fs/f2fs/<disk>/unusable_blocks_per_sec
-Date:		June 2022
-Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
-Description:	Shows the number of unusable blocks in a section which was defined by
-		the zone capacity reported by underlying zoned device.
-
-What:		/sys/fs/f2fs/<disk>/current_atomic_write
-Date:		July 2022
-Contact:	"Daeho Jeong" <daehojeong@google.com>
-Description:	Show the total current atomic write block count, which is not committed yet.
-		This is a read-only entry.
-
-What:		/sys/fs/f2fs/<disk>/peak_atomic_write
-Date:		July 2022
-Contact:	"Daeho Jeong" <daehojeong@google.com>
-Description:	Show the peak value of total current atomic write block count after boot.
-		If you write "0" here, you can initialize to "0".
-
-What:		/sys/fs/f2fs/<disk>/committed_atomic_block
-Date:		July 2022
-Contact:	"Daeho Jeong" <daehojeong@google.com>
-Description:	Show the accumulated total committed atomic write block count after boot.
-		If you write "0" here, you can initialize to "0".
-
-What:		/sys/fs/f2fs/<disk>/revoked_atomic_block
-Date:		July 2022
-Contact:	"Daeho Jeong" <daehojeong@google.com>
-Description:	Show the accumulated total revoked atomic write block count after boot.
-		If you write "0" here, you can initialize to "0".

Documentation/ABI/testing/sysfs-kernel-livepatch

@@ -55,14 +55,6 @@ Description:
 		The object directory contains subdirectories for each function
 		that is patched within the object.
 
-What:		/sys/kernel/livepatch/<patch>/<object>/patched
-Date:		August 2022
-KernelVersion:	6.1.0
-Contact:	live-patching@vger.kernel.org
-Description:
-		An attribute which indicates whether the object is currently
-		patched.
-
 What:		/sys/kernel/livepatch/<patch>/<object>/<function,sympos>
 Date:		Nov 2014
 KernelVersion:	3.19.0

Documentation/ABI/testing/sysfs-kernel-mm-damon

@@ -23,10 +23,9 @@ Date:		Mar 2022
 Contact:	SeongJae Park <sj@kernel.org>
 Description:	Writing 'on' or 'off' to this file makes the kdamond starts or
 		stops, respectively.  Reading the file returns the keywords
-		based on the current status.  Writing 'commit' to this file
-		makes the kdamond reads the user inputs in the sysfs files
-		except 'state' again.  Writing 'update_schemes_stats' to the
-		file updates contents of schemes stats files of the kdamond.
+		based on the current status.  Writing 'update_schemes_stats' to
+		the file updates contents of schemes stats files of the
+		kdamond.
 
 What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/pid
 Date:		Mar 2022
@@ -41,24 +40,14 @@ Description:	Writing a number 'N' to this file creates the number of
 		directories for controlling each DAMON context named '0' to
 		'N-1' under the contexts/ directory.
 
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/avail_operations
-Date:		Apr 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Reading this file returns the available monitoring operations
-		sets on the currently running kernel.
-
 What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/operations
 Date:		Mar 2022
 Contact:	SeongJae Park <sj@kernel.org>
 Description:	Writing a keyword for a monitoring operations set ('vaddr' for
-		virtual address spaces monitoring, 'fvaddr' for fixed virtual
-		address ranges monitoring, and 'paddr' for the physical address
-		space monitoring) to this file makes the context to use the
-		operations set.  Reading the file returns the keyword for the
-		operations set the context is set to use.
-
-		Note that only the operations sets that listed in
-		'avail_operations' file are valid inputs.
+		virtual address spaces monitoring, and 'paddr' for the physical
+		address space monitoring) to this file makes the context to use
+		the operations set.  Reading the file returns the keyword for
+		the operations set the context is set to use.
 
 What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/monitoring_attrs/intervals/sample_us
 Date:		Mar 2022

Documentation/ABI/testing/sysfs-kernel-mm-ksm

@@ -41,7 +41,7 @@ Description:	Kernel Samepage Merging daemon sysfs interface
 		sleep_millisecs: how many milliseconds ksm should sleep between
 		scans.
 
-		See Documentation/mm/ksm.rst for more information.
+		See Documentation/vm/ksm.rst for more information.
 
 What:		/sys/kernel/mm/ksm/merge_across_nodes
 Date:		January 2013

Documentation/ABI/testing/sysfs-kernel-mm-memory-tiers

@@ -1,25 +0,0 @@
-What:		/sys/devices/virtual/memory_tiering/
-Date:		August 2022
-Contact:	Linux memory management mailing list <linux-mm@kvack.org>
-Description:	A collection of all the memory tiers allocated.
-
-		Individual memory tier details are contained in subdirectories
-		named by the abstract distance of the memory tier.
-
-		/sys/devices/virtual/memory_tiering/memory_tierN/
-
-
-What:		/sys/devices/virtual/memory_tiering/memory_tierN/
-		/sys/devices/virtual/memory_tiering/memory_tierN/nodelist
-Date:		August 2022
-Contact:	Linux memory management mailing list <linux-mm@kvack.org>
-Description:	Directory with details of a specific memory tier
-
-		This is the directory containing information about a particular
-		memory tier, memtierN, where N is derived based on abstract distance.
-
-		A smaller value of N implies a higher (faster) memory tier in the
-		hierarchy.
-
-		nodelist: NUMA nodes that are part of this memory tier.
-

Documentation/ABI/testing/sysfs-kernel-slab

@@ -37,7 +37,7 @@ Description:
 		The alloc_calls file is read-only and lists the kernel code
 		locations from which allocations for this cache were performed.
 		The alloc_calls file only contains information if debugging is
-		enabled for that cache (see Documentation/mm/slub.rst).
+		enabled for that cache (see Documentation/vm/slub.rst).
 
 What:		/sys/kernel/slab/<cache>/alloc_fastpath
 Date:		February 2008
@@ -219,7 +219,7 @@ Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
 Description:
 		The free_calls file is read-only and lists the locations of
 		object frees if slab debugging is enabled (see
-		Documentation/mm/slub.rst).
+		Documentation/vm/slub.rst).
 
 What:		/sys/kernel/slab/<cache>/free_fastpath
 Date:		February 2008

Documentation/ABI/testing/sysfs-platform-asus-wmi

@@ -57,44 +57,3 @@ Description:
 			* 0 - default,
 			* 1 - overboost,
 			* 2 - silent
-
-What:		/sys/devices/platform/<platform>/gpu_mux_mode
-Date:		Aug 2022
-KernelVersion:	6.1
-Contact:	"Luke Jones" <luke@ljones.dev>
-Description:
-		Switch the GPU hardware MUX mode. Laptops with this feature can
-		can be toggled to boot with only the dGPU (discrete mode) or in
-		standard Optimus/Hybrid mode. On switch a reboot is required:
-
-			* 0 - Discrete GPU,
-			* 1 - Optimus/Hybrid,
-
-What:		/sys/devices/platform/<platform>/dgpu_disable
-Date:		Aug 2022
-KernelVersion:	5.17
-Contact:	"Luke Jones" <luke@ljones.dev>
-Description:
-		Disable discrete GPU:
-			* 0 - Enable dGPU,
-			* 1 - Disable dGPU
-
-What:		/sys/devices/platform/<platform>/egpu_enable
-Date:		Aug 2022
-KernelVersion:	5.17
-Contact:	"Luke Jones" <luke@ljones.dev>
-Description:
-		Enable the external GPU paired with ROG X-Flow laptops.
-		Toggling this setting will also trigger ACPI to disable the dGPU:
-
-			* 0 - Disable,
-			* 1 - Enable
-
-What:		/sys/devices/platform/<platform>/panel_od
-Date:		Aug 2022
-KernelVersion:	5.17
-Contact:	"Luke Jones" <luke@ljones.dev>
-Description:
-		Enable an LCD response-time boost to reduce or remove ghosting:
-			* 0 - Disable,
-			* 1 - Enable

Documentation/ABI/testing/sysfs-platform-brcmstb-memc

@@ -1,15 +0,0 @@
-What:		/sys/bus/platform/devices/*/srpd
-Date:		July 2022
-KernelVersion:	5.21
-Contact:	Florian Fainelli <f.fainelli@gmail.com>
-Description:
-		Self Refresh Power Down (SRPD) inactivity timeout counted in
-		internal DDR controller clock cycles. Possible values range
-		from 0 (disable inactivity timeout) to 65535 (0xffff).
-
-What:		/sys/bus/platform/devices/*/frequency
-Date:		July 2022
-KernelVersion:	5.21
-Contact:	Florian Fainelli <f.fainelli@gmail.com>
-Description:
-		DDR PHY frequency in Hz.

Documentation/ABI/testing/sysfs-platform-chipidea-usb2

@@ -2,8 +2,8 @@ What:		/sys/bus/platform/devices/ci_hdrc.0/role
 Date:		Mar 2017
 Contact:	Peter Chen <peter.chen@nxp.com>
 Description:
-		When read, it returns string "gadget" or "host", indicating
-		the current controller role.
+		It returns string "gadget" or "host" when read it, it indicates
+		current controller role.
 
-		It will do role switch when "gadget" or "host" is written to it.
+		It will do role switch when write "gadget" or "host" to it.
 		Only controller at dual-role configuration supports writing.

Documentation/ABI/testing/sysfs-platform-intel-ifs

@@ -1,39 +0,0 @@
-What:		/sys/devices/virtual/misc/intel_ifs_<N>/run_test
-Date:		April 21 2022
-KernelVersion:	5.19
-Contact:	"Jithu Joseph" <jithu.joseph@intel.com>
-Description:	Write <cpu#> to trigger IFS test for one online core.
-		Note that the test is per core. The cpu# can be
-		for any thread on the core. Running on one thread
-		completes the test for the core containing that thread.
-		Example: to test the core containing cpu5: echo 5 >
-		/sys/devices/platform/intel_ifs.<N>/run_test
-
-What:		/sys/devices/virtual/misc/intel_ifs_<N>/status
-Date:		April 21 2022
-KernelVersion:	5.19
-Contact:	"Jithu Joseph" <jithu.joseph@intel.com>
-Description:	The status of the last test. It can be one of "pass", "fail"
-		or "untested".
-
-What:		/sys/devices/virtual/misc/intel_ifs_<N>/details
-Date:		April 21 2022
-KernelVersion:	5.19
-Contact:	"Jithu Joseph" <jithu.joseph@intel.com>
-Description:	Additional information regarding the last test. The details file reports
-		the hex value of the SCAN_STATUS MSR. Note that the error_code field
-		may contain driver defined software code not defined in the Intel SDM.
-
-What:		/sys/devices/virtual/misc/intel_ifs_<N>/image_version
-Date:		April 21 2022
-KernelVersion:	5.19
-Contact:	"Jithu Joseph" <jithu.joseph@intel.com>
-Description:	Version (hexadecimal) of loaded IFS binary image. If no scan image
-		is loaded reports "none".
-
-What:		/sys/devices/virtual/misc/intel_ifs_<N>/reload
-Date:		April 21 2022
-KernelVersion:	5.19
-Contact:	"Jithu Joseph" <jithu.joseph@intel.com>
-Description:	Write "1" (or "y" or "Y") to reload the IFS image from
-		/lib/firmware/intel/ifs/ff-mm-ss.scan.

Documentation/ABI/testing/sysfs-power

@@ -152,7 +152,7 @@ Description:
 		case further investigation is required to determine which
 		device is causing the problem.  Note that genuine RTC clock
 		values (such as when pm_trace has not been used), can still
-		match a device and output its name here.
+		match a device and output it's name here.
 
 What:		/sys/power/pm_async
 Date:		January 2009

Documentation/COPYING-logo

@@ -0,0 +1,13 @@
+This is the full-colour version of the currently unofficial Linux logo
+("currently unofficial" just means that there has been no paperwork and
+that I have not really announced it yet).  It was created by Larry Ewing,
+and is freely usable as long as you acknowledge Larry as the original
+artist. 
+
+Note that there are black-and-white versions of this available that
+scale down to smaller sizes and are better for letterheads or whatever
+you want to use it for: for the full range of logos take a look at
+Larry's web-page:
+
+	https://www.isc.tamu.edu/~lewing/linux/
+

Documentation/Kconfig

@@ -1,22 +1,23 @@
 config WARN_MISSING_DOCUMENTS
+
 	bool "Warn if there's a missing documentation file"
 	depends on COMPILE_TEST
 	help
-	  It is not uncommon that a document gets renamed.
-	  This option makes the Kernel to check for missing dependencies,
-	  warning when something is missing. Works only if the Kernel
-	  is built from a git tree.
+	   It is not uncommon that a document gets renamed.
+	   This option makes the Kernel to check for missing dependencies,
+	   warning when something is missing. Works only if the Kernel
+	   is built from a git tree.
 
-	  If unsure, select 'N'.
+	   If unsure, select 'N'.
 
 config WARN_ABI_ERRORS
 	bool "Warn if there are errors at ABI files"
 	depends on COMPILE_TEST
 	help
-	  The files under Documentation/ABI should follow what's
-	  described at Documentation/ABI/README. Yet, as they're manually
-	  written, it would be possible that some of those files would
-	  have errors that would break them for being parsed by
-	  scripts/get_abi.pl. Add a check to verify them.
+	   The files under Documentation/ABI should follow what's
+	   described at Documentation/ABI/README. Yet, as they're manually
+	   written, it would be possible that some of those files would
+	   have errors that would break them for being parsed by
+	   scripts/get_abi.pl. Add a check to verify them.
 
-	  If unsure, select 'N'.
+	   If unsure, select 'N'.

Documentation/PCI/endpoint/index.rst

@@ -13,8 +13,6 @@ PCI Endpoint Framework
    pci-test-howto
    pci-ntb-function
    pci-ntb-howto
-   pci-vntb-function
-   pci-vntb-howto
 
    function/binding/pci-test
    function/binding/pci-ntb

Documentation/PCI/endpoint/pci-vntb-function.rst

@@ -1,129 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-=================
-PCI vNTB Function
-=================
-
-:Author: Frank Li <Frank.Li@nxp.com>
-
-The difference between PCI NTB function and PCI vNTB function is
-
-PCI NTB function need at two endpoint instances and connect HOST1
-and HOST2.
-
-PCI vNTB function only use one host and one endpoint(EP), use NTB
-connect EP and PCI host
-
-.. code-block:: text
-
-
-  +------------+         +---------------------------------------+
-  |            |         |                                       |
-  +------------+         |                        +--------------+
-  | NTB        |         |                        | NTB          |
-  | NetDev     |         |                        | NetDev       |
-  +------------+         |                        +--------------+
-  | NTB        |         |                        | NTB          |
-  | Transfer   |         |                        | Transfer     |
-  +------------+         |                        +--------------+
-  |            |         |                        |              |
-  |  PCI NTB   |         |                        |              |
-  |    EPF     |         |                        |              |
-  |   Driver   |         |                        | PCI Virtual  |
-  |            |         +---------------+        | NTB Driver   |
-  |            |         | PCI EP NTB    |<------>|              |
-  |            |         |  FN Driver    |        |              |
-  +------------+         +---------------+        +--------------+
-  |            |         |               |        |              |
-  |  PCI BUS   | <-----> |  PCI EP BUS   |        |  Virtual PCI |
-  |            |  PCI    |               |        |     BUS      |
-  +------------+         +---------------+--------+--------------+
-      PCI RC                        PCI EP
-
-Constructs used for Implementing vNTB
-=====================================
-
-	1) Config Region
-	2) Self Scratchpad Registers
-	3) Peer Scratchpad Registers
-	4) Doorbell (DB) Registers
-	5) Memory Window (MW)
-
-
-Config Region:
---------------
-
-It is same as PCI NTB Function driver
-
-Scratchpad Registers:
----------------------
-
-It is appended after Config region.
-
-.. code-block:: text
-
-
-  +--------------------------------------------------+ Base
-  |                                                  |
-  |                                                  |
-  |                                                  |
-  |          Common Config Register                  |
-  |                                                  |
-  |                                                  |
-  |                                                  |
-  +-----------------------+--------------------------+ Base + span_offset
-  |                       |                          |
-  |    Peer Span Space    |    Span Space            |
-  |                       |                          |
-  |                       |                          |
-  +-----------------------+--------------------------+ Base + span_offset
-  |                       |                          |      + span_count * 4
-  |                       |                          |
-  |     Span Space        |   Peer Span Space        |
-  |                       |                          |
-  +-----------------------+--------------------------+
-        Virtual PCI             Pcie Endpoint
-        NTB Driver               NTB Driver
-
-
-Doorbell Registers:
--------------------
-
-  Doorbell Registers are used by the hosts to interrupt each other.
-
-Memory Window:
---------------
-
-  Actual transfer of data between the two hosts will happen using the
-  memory window.
-
-Modeling Constructs:
-====================
-
-32-bit BARs.
-
-======  ===============
-BAR NO  CONSTRUCTS USED
-======  ===============
-BAR0    Config Region
-BAR1    Doorbell
-BAR2    Memory Window 1
-BAR3    Memory Window 2
-BAR4    Memory Window 3
-BAR5    Memory Window 4
-======  ===============
-
-64-bit BARs.
-
-======  ===============================
-BAR NO  CONSTRUCTS USED
-======  ===============================
-BAR0    Config Region + Scratchpad
-BAR1
-BAR2    Doorbell
-BAR3
-BAR4    Memory Window 1
-BAR5
-======  ===============================
-
-

Documentation/PCI/endpoint/pci-vntb-howto.rst

@@ -1,167 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-===================================================================
-PCI Non-Transparent Bridge (NTB) Endpoint Function (EPF) User Guide
-===================================================================
-
-:Author: Frank Li <Frank.Li@nxp.com>
-
-This document is a guide to help users use pci-epf-vntb function driver
-and ntb_hw_epf host driver for NTB functionality. The list of steps to
-be followed in the host side and EP side is given below. For the hardware
-configuration and internals of NTB using configurable endpoints see
-Documentation/PCI/endpoint/pci-vntb-function.rst
-
-Endpoint Device
-===============
-
-Endpoint Controller Devices
----------------------------
-
-To find the list of endpoint controller devices in the system::
-
-        # ls /sys/class/pci_epc/
-          5f010000.pcie_ep
-
-If PCI_ENDPOINT_CONFIGFS is enabled::
-
-        # ls /sys/kernel/config/pci_ep/controllers
-          5f010000.pcie_ep
-
-Endpoint Function Drivers
--------------------------
-
-To find the list of endpoint function drivers in the system::
-
-	# ls /sys/bus/pci-epf/drivers
-	pci_epf_ntb  pci_epf_test  pci_epf_vntb
-
-If PCI_ENDPOINT_CONFIGFS is enabled::
-
-	# ls /sys/kernel/config/pci_ep/functions
-	pci_epf_ntb  pci_epf_test  pci_epf_vntb
-
-
-Creating pci-epf-vntb Device
-----------------------------
-
-PCI endpoint function device can be created using the configfs. To create
-pci-epf-vntb device, the following commands can be used::
-
-	# mount -t configfs none /sys/kernel/config
-	# cd /sys/kernel/config/pci_ep/
-	# mkdir functions/pci_epf_vntb/func1
-
-The "mkdir func1" above creates the pci-epf-ntb function device that will
-be probed by pci_epf_vntb driver.
-
-The PCI endpoint framework populates the directory with the following
-configurable fields::
-
-	# ls functions/pci_epf_ntb/func1
-	baseclass_code    deviceid          msi_interrupts    pci-epf-ntb.0
-	progif_code       secondary         subsys_id         vendorid
-	cache_line_size   interrupt_pin     msix_interrupts   primary
-	revid             subclass_code     subsys_vendor_id
-
-The PCI endpoint function driver populates these entries with default values
-when the device is bound to the driver. The pci-epf-vntb driver populates
-vendorid with 0xffff and interrupt_pin with 0x0001::
-
-	# cat functions/pci_epf_vntb/func1/vendorid
-	0xffff
-	# cat functions/pci_epf_vntb/func1/interrupt_pin
-	0x0001
-
-
-Configuring pci-epf-vntb Device
--------------------------------
-
-The user can configure the pci-epf-vntb device using its configfs entry. In order
-to change the vendorid and the deviceid, the following
-commands can be used::
-
-	# echo 0x1957 > functions/pci_epf_vntb/func1/vendorid
-	# echo 0x0809 > functions/pci_epf_vntb/func1/deviceid
-
-In order to configure NTB specific attributes, a new sub-directory to func1
-should be created::
-
-	# mkdir functions/pci_epf_vntb/func1/pci_epf_vntb.0/
-
-The NTB function driver will populate this directory with various attributes
-that can be configured by the user::
-
-	# ls functions/pci_epf_vntb/func1/pci_epf_vntb.0/
-	db_count    mw1         mw2         mw3         mw4         num_mws
-	spad_count
-
-A sample configuration for NTB function is given below::
-
-	# echo 4 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/db_count
-	# echo 128 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/spad_count
-	# echo 1 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/num_mws
-	# echo 0x100000 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/mw1
-
-A sample configuration for virtual NTB driver for virutal PCI bus::
-
-	# echo 0x1957 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vntb_vid
-	# echo 0x080A > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vntb_pid
-	# echo 0x10 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vbus_number
-
-Binding pci-epf-ntb Device to EP Controller
---------------------------------------------
-
-NTB function device should be attached to PCI endpoint controllers
-connected to the host.
-
-	# ln -s controllers/5f010000.pcie_ep functions/pci-epf-ntb/func1/primary
-
-Once the above step is completed, the PCI endpoint controllers are ready to
-establish a link with the host.
-
-
-Start the Link
---------------
-
-In order for the endpoint device to establish a link with the host, the _start_
-field should be populated with '1'. For NTB, both the PCI endpoint controllers
-should establish link with the host (imx8 don't need this steps)::
-
-	# echo 1 > controllers/5f010000.pcie_ep/start
-
-RootComplex Device
-==================
-
-lspci Output at Host side
--------------------------
-
-Note that the devices listed here correspond to the values populated in
-"Creating pci-epf-ntb Device" section above::
-
-	# lspci
-        00:00.0 PCI bridge: Freescale Semiconductor Inc Device 0000 (rev 01)
-        01:00.0 RAM memory: Freescale Semiconductor Inc Device 0809
-
-Endpoint Device / Virtual PCI bus
-=================================
-
-lspci Output at EP Side / Virtual PCI bus
------------------------------------------
-
-Note that the devices listed here correspond to the values populated in
-"Creating pci-epf-ntb Device" section above::
-
-        # lspci
-        10:00.0 Unassigned class [ffff]: Dawicontrol Computersysteme GmbH Device 1234 (rev ff)
-
-Using ntb_hw_epf Device
------------------------
-
-The host side software follows the standard NTB software architecture in Linux.
-All the existing client side NTB utilities like NTB Transport Client and NTB
-Netdev, NTB Ping Pong Test Client and NTB Tool Test Client can be used with NTB
-function device.
-
-For more information on NTB see
-:doc:`Non-Transparent Bridge <../../driver-api/ntb>`

Documentation/PCI/pci-iov-howto.rst

@@ -125,14 +125,14 @@ Following piece of code illustrates the usage of the SR-IOV API.
 		...
 	}
 
-	static int dev_suspend(struct device *dev)
+	static int dev_suspend(struct pci_dev *dev, pm_message_t state)
 	{
 		...
 
 		return 0;
 	}
 
-	static int dev_resume(struct device *dev)
+	static int dev_resume(struct pci_dev *dev)
 	{
 		...
 
@@ -165,7 +165,8 @@ Following piece of code illustrates the usage of the SR-IOV API.
 		.id_table =	dev_id_table,
 		.probe =	dev_probe,
 		.remove =	dev_remove,
-		.driver.pm =	&dev_pm_ops,
+		.suspend =	dev_suspend,
+		.resume =	dev_resume,
 		.shutdown =	dev_shutdown,
 		.sriov_configure = dev_sriov_configure,
 	};

Documentation/PCI/pci.rst

@@ -273,12 +273,12 @@ Set the DMA mask size
 While all drivers should explicitly indicate the DMA capability
 (e.g. 32 or 64 bit) of the PCI bus master, devices with more than
 32-bit bus master capability for streaming data need the driver
-to "register" this capability by calling dma_set_mask() with
+to "register" this capability by calling pci_set_dma_mask() with
 appropriate parameters.  In general this allows more efficient DMA
 on systems where System RAM exists above 4G _physical_ address.
 
 Drivers for all PCI-X and PCIe compliant devices must call
-dma_set_mask() as they are 64-bit DMA devices.
+set_dma_mask() as they are 64-bit DMA devices.
 
 Similarly, drivers must also "register" this capability if the device
 can directly address "coherent memory" in System RAM above 4G physical

Documentation/PCI/sysfs-pci.rst

@@ -125,7 +125,7 @@ implementation of that functionality. To support the historical interface of
 mmap() through files in /proc/bus/pci, platforms may also set HAVE_PCI_MMAP.
 
 Alternatively, platforms which set HAVE_PCI_MMAP may provide their own
-implementation of pci_mmap_resource_range() instead of defining
+implementation of pci_mmap_page_range() instead of defining
 ARCH_GENERIC_PCI_MMAP_RESOURCE.
 
 Platforms which support write-combining maps of PCI resources must define

Documentation/RCU/Design/Data-Structures/Data-Structures.rst

@@ -973,7 +973,7 @@ The ``->dynticks`` field counts the corresponding CPU's transitions to
 and from either dyntick-idle or user mode, so that this counter has an
 even value when the CPU is in dyntick-idle mode or user mode and an odd
 value otherwise. The transitions to/from user mode need to be counted
-for user mode adaptive-ticks support (see Documentation/timers/no_hz.rst).
+for user mode adaptive-ticks support (see timers/NO_HZ.txt).
 
 The ``->rcu_need_heavy_qs`` field is used to record the fact that the
 RCU core code would really like to see a quiescent state from the

Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.rst

@@ -406,7 +406,7 @@ In earlier implementations, the task requesting the expedited grace
 period also drove it to completion. This straightforward approach had
 the disadvantage of needing to account for POSIX signals sent to user
 tasks, so more recent implemementations use the Linux kernel's
-workqueues (see Documentation/core-api/workqueue.rst).
+`workqueues <https://www.kernel.org/doc/Documentation/core-api/workqueue.rst>`__.
 
 The requesting task still does counter snapshotting and funnel-lock
 processing, but the task reaching the top of the funnel lock does a

Documentation/RCU/Design/Requirements/Requirements.rst

@@ -370,8 +370,8 @@ pointer fetched by rcu_dereference() may not be used outside of the
 outermost RCU read-side critical section containing that
 rcu_dereference(), unless protection of the corresponding data
 element has been passed from RCU to some other synchronization
-mechanism, most commonly locking or reference counting
-(see ../../rcuref.rst).
+mechanism, most commonly locking or `reference
+counting <https://www.kernel.org/doc/Documentation/RCU/rcuref.txt>`__.
 
 .. |high-quality implementation of C11 memory_order_consume [PDF]| replace:: high-quality implementation of C11 ``memory_order_consume`` [PDF]
 .. _high-quality implementation of C11 memory_order_consume [PDF]: http://www.rdrop.com/users/paulmck/RCU/consume.2015.07.13a.pdf
@@ -1844,10 +1844,10 @@ that meets this requirement.
 
 Furthermore, NMI handlers can be interrupted by what appear to RCU to be
 normal interrupts. One way that this can happen is for code that
-directly invokes ct_irq_enter() and ct_irq_exit() to be called
+directly invokes rcu_irq_enter() and rcu_irq_exit() to be called
 from an NMI handler. This astonishing fact of life prompted the current
-code structure, which has ct_irq_enter() invoking
-ct_nmi_enter() and ct_irq_exit() invoking ct_nmi_exit().
+code structure, which has rcu_irq_enter() invoking
+rcu_nmi_enter() and rcu_irq_exit() invoking rcu_nmi_exit().
 And yes, I also learned of this requirement the hard way.
 
 Loadable Modules
@@ -2195,7 +2195,7 @@ scheduling-clock interrupt be enabled when RCU needs it to be:
    sections, and RCU believes this CPU to be idle, no problem. This
    sort of thing is used by some architectures for light-weight
    exception handlers, which can then avoid the overhead of
-   ct_irq_enter() and ct_irq_exit() at exception entry and
+   rcu_irq_enter() and rcu_irq_exit() at exception entry and
    exit, respectively. Some go further and avoid the entireties of
    irq_enter() and irq_exit().
    Just make very sure you are running some of your tests with
@@ -2226,7 +2226,7 @@ scheduling-clock interrupt be enabled when RCU needs it to be:
 +-----------------------------------------------------------------------+
 | **Answer**:                                                           |
 +-----------------------------------------------------------------------+
-| One approach is to do ``ct_irq_exit();ct_irq_enter();`` every so      |
+| One approach is to do ``rcu_irq_exit();rcu_irq_enter();`` every so    |
 | often. But given that long-running interrupt handlers can cause other |
 | problems, not least for response time, shouldn't you work to keep     |
 | your interrupt handler's runtime within reasonable bounds?            |
@@ -2654,38 +2654,6 @@ synchronize_rcu(), and rcu_barrier(), respectively. In
 three APIs are therefore implemented by separate functions that check
 for voluntary context switches.
 
-Tasks Rude RCU
-~~~~~~~~~~~~~~
-
-Some forms of tracing need to wait for all preemption-disabled regions
-of code running on any online CPU, including those executed when RCU is
-not watching.  This means that synchronize_rcu() is insufficient, and
-Tasks Rude RCU must be used instead.  This flavor of RCU does its work by
-forcing a workqueue to be scheduled on each online CPU, hence the "Rude"
-moniker.  And this operation is considered to be quite rude by real-time
-workloads that don't want their ``nohz_full`` CPUs receiving IPIs and
-by battery-powered systems that don't want their idle CPUs to be awakened.
-
-The tasks-rude-RCU API is also reader-marking-free and thus quite compact,
-consisting of call_rcu_tasks_rude(), synchronize_rcu_tasks_rude(),
-and rcu_barrier_tasks_rude().
-
-Tasks Trace RCU
-~~~~~~~~~~~~~~~
-
-Some forms of tracing need to sleep in readers, but cannot tolerate
-SRCU's read-side overhead, which includes a full memory barrier in both
-srcu_read_lock() and srcu_read_unlock().  This need is handled by a
-Tasks Trace RCU that uses scheduler locking and IPIs to synchronize with
-readers.  Real-time systems that cannot tolerate IPIs may build their
-kernels with ``CONFIG_TASKS_TRACE_RCU_READ_MB=y``, which avoids the IPIs at
-the expense of adding full memory barriers to the read-side primitives.
-
-The tasks-trace-RCU API is also reasonably compact,
-consisting of rcu_read_lock_trace(), rcu_read_unlock_trace(),
-rcu_read_lock_trace_held(), call_rcu_tasks_trace(),
-synchronize_rcu_tasks_trace(), and rcu_barrier_tasks_trace().
-
 Possible Future Changes
 -----------------------
 

Documentation/RCU/arrayRCU.rst

@@ -33,8 +33,8 @@ Situation 1: Hash Tables
 
 Hash tables are often implemented as an array, where each array entry
 has a linked-list hash chain.  Each hash chain can be protected by RCU
-as described in listRCU.rst.  This approach also applies to other
-array-of-list situations, such as radix trees.
+as described in the listRCU.txt document.  This approach also applies
+to other array-of-list situations, such as radix trees.
 
 .. _static_arrays:
 

Documentation/RCU/checklist.rst

@@ -66,13 +66,8 @@ over a rather long period of time, but improvements are always welcome!
 	As a rough rule of thumb, any dereference of an RCU-protected
 	pointer must be covered by rcu_read_lock(), rcu_read_lock_bh(),
 	rcu_read_lock_sched(), or by the appropriate update-side lock.
-	Explicit disabling of preemption (preempt_disable(), for example)
-	can serve as rcu_read_lock_sched(), but is less readable and
-	prevents lockdep from detecting locking issues.
-
-	Please not that you *cannot* rely on code known to be built
-	only in non-preemptible kernels.  Such code can and will break,
-	especially in kernels built with CONFIG_PREEMPT_COUNT=y.
+	Disabling of preemption can serve as rcu_read_lock_sched(), but
+	is less readable and prevents lockdep from detecting locking issues.
 
 	Letting RCU-protected pointers "leak" out of an RCU read-side
 	critical section is every bit as bad as letting them leak out
@@ -145,7 +140,8 @@ over a rather long period of time, but improvements are always welcome!
 		prevents destructive compiler optimizations.  However,
 		with a bit of devious creativity, it is possible to
 		mishandle the return value from rcu_dereference().
-		Please see rcu_dereference.rst for more information.
+		Please see rcu_dereference.txt in this directory for
+		more information.
 
 		The rcu_dereference() primitive is used by the
 		various "_rcu()" list-traversal primitives, such
@@ -155,7 +151,7 @@ over a rather long period of time, but improvements are always welcome!
 		primitives.  This is particularly useful in code that
 		is common to readers and updaters.  However, lockdep
 		will complain if you access rcu_dereference() outside
-		of an RCU read-side critical section.  See lockdep.rst
+		of an RCU read-side critical section.  See lockdep.txt
 		to learn what to do about this.
 
 		Of course, neither rcu_dereference() nor the "_rcu()"
@@ -190,9 +186,6 @@ over a rather long period of time, but improvements are always welcome!
 
 5.	If call_rcu() or call_srcu() is used, the callback function will
 	be called from softirq context.  In particular, it cannot block.
-	If you need the callback to block, run that code in a workqueue
-	handler scheduled from the callback.  The queue_rcu_work()
-	function does this for you in the case of call_rcu().
 
 6.	Since synchronize_rcu() can block, it cannot be called
 	from any sort of irq context.  The same rule applies
@@ -305,8 +298,7 @@ over a rather long period of time, but improvements are always welcome!
 		the machine.
 
 	d.	Periodically invoke synchronize_rcu(), permitting a limited
-		number of updates per grace period.  Better yet, periodically
-		invoke rcu_barrier() to wait for all outstanding callbacks.
+		number of updates per grace period.
 
 	The same cautions apply to call_srcu() and kfree_rcu().
 
@@ -331,7 +323,7 @@ over a rather long period of time, but improvements are always welcome!
 	primitives when the update-side lock is held is that doing so
 	can be quite helpful in reducing code bloat when common code is
 	shared between readers and updaters.  Additional primitives
-	are provided for this case, as discussed in lockdep.rst.
+	are provided for this case, as discussed in lockdep.txt.
 
 	One exception to this rule is when data is only ever added to
 	the linked data structure, and is never removed during any
@@ -486,6 +478,6 @@ over a rather long period of time, but improvements are always welcome!
 	So if you need to wait for both an RCU grace period and for
 	all pre-existing call_rcu() callbacks, you will need to execute
 	both rcu_barrier() and synchronize_rcu(), if necessary, using
-	something like workqueues to execute them concurrently.
+	something like workqueues to to execute them concurrently.
 
-	See rcubarrier.rst for more information.
+	See rcubarrier.txt for more information.

Documentation/RCU/lockdep.rst

@@ -61,7 +61,7 @@ checking of rcu_dereference() primitives:
 	rcu_access_pointer(p):
 		Return the value of the pointer and omit all barriers,
 		but retain the compiler constraints that prevent duplicating
-		or coalescsing.  This is useful when testing the
+		or coalescsing.  This is useful when when testing the
 		value of the pointer itself, for example, against NULL.
 
 The rcu_dereference_check() check expression can be any boolean

Documentation/RCU/rcu.rst

@@ -10,8 +10,9 @@ A "grace period" must elapse between the two parts, and this grace period
 must be long enough that any readers accessing the item being deleted have
 since dropped their references.  For example, an RCU-protected deletion
 from a linked list would first remove the item from the list, wait for
-a grace period to elapse, then free the element.  See listRCU.rst for more
-information on using RCU with linked lists.
+a grace period to elapse, then free the element.  See the
+:ref:`Documentation/RCU/listRCU.rst <list_rcu_doc>` for more information on
+using RCU with linked lists.
 
 Frequently Asked Questions
 --------------------------
@@ -49,7 +50,7 @@ Frequently Asked Questions
 - If I am running on a uniprocessor kernel, which can only do one
   thing at a time, why should I wait for a grace period?
 
-  See UP.rst for more information.
+  See :ref:`Documentation/RCU/UP.rst <up_doc>` for more information.
 
 - How can I see where RCU is currently used in the Linux kernel?
 
@@ -63,13 +64,13 @@ Frequently Asked Questions
 
 - What guidelines should I follow when writing code that uses RCU?
 
-  See checklist.rst.
+  See the checklist.txt file in this directory.
 
 - Why the name "RCU"?
 
   "RCU" stands for "read-copy update".
-  listRCU.rst has more information on where this name came from, search
-  for "read-copy update" to find it.
+  :ref:`Documentation/RCU/listRCU.rst <list_rcu_doc>` has more information on where
+  this name came from, search for "read-copy update" to find it.
 
 - I hear that RCU is patented?  What is with that?