arm64: dts: msm8998: Wire up interconnects and OPPs to sdhci port 2

Wire up the OPP table and interconnects to the SDHCI port 2 to
improve performance and power consumption.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>

.clang-format

@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 #
-# clang-format configuration file. Intended for clang-format >= 11.
+# clang-format configuration file. Intended for clang-format >= 4.
 #
 # For more information, see:
 #
@@ -13,7 +13,7 @@ AccessModifierOffset: -4
 AlignAfterOpenBracket: Align
 AlignConsecutiveAssignments: false
 AlignConsecutiveDeclarations: false
-AlignEscapedNewlines: Left
+#AlignEscapedNewlines: Left # Unknown to clang-format-4.0
 AlignOperands: true
 AlignTrailingComments: false
 AllowAllParametersOfDeclarationOnNextLine: false
@@ -37,24 +37,24 @@ BraceWrapping:
   AfterObjCDeclaration: false
   AfterStruct: false
   AfterUnion: false
-  AfterExternBlock: false
+  #AfterExternBlock: false # Unknown to clang-format-5.0
   BeforeCatch: false
   BeforeElse: false
   IndentBraces: false
-  SplitEmptyFunction: true
-  SplitEmptyRecord: true
-  SplitEmptyNamespace: true
+  #SplitEmptyFunction: true # Unknown to clang-format-4.0
+  #SplitEmptyRecord: true # Unknown to clang-format-4.0
+  #SplitEmptyNamespace: true # Unknown to clang-format-4.0
 BreakBeforeBinaryOperators: None
 BreakBeforeBraces: Custom
-BreakBeforeInheritanceComma: false
+#BreakBeforeInheritanceComma: false # Unknown to clang-format-4.0
 BreakBeforeTernaryOperators: false
 BreakConstructorInitializersBeforeComma: false
-BreakConstructorInitializers: BeforeComma
+#BreakConstructorInitializers: BeforeComma # Unknown to clang-format-4.0
 BreakAfterJavaFieldAnnotations: false
 BreakStringLiterals: false
 ColumnLimit: 80
 CommentPragmas: '^ IWYU pragma:'
-CompactNamespaces: false
+#CompactNamespaces: false # Unknown to clang-format-4.0
 ConstructorInitializerAllOnOneLineOrOnePerLine: false
 ConstructorInitializerIndentWidth: 8
 ContinuationIndentWidth: 8
@@ -62,56 +62,39 @@ Cpp11BracedListStyle: false
 DerivePointerAlignment: false
 DisableFormat: false
 ExperimentalAutoDetectBinPacking: false
-FixNamespaceComments: false
+#FixNamespaceComments: false # Unknown to clang-format-4.0
 
 # Taken from:
-#   git grep -h '^#define [^[:space:]]*for_each[^[:space:]]*(' include/ tools/ \
+#   git grep -h '^#define [^[:space:]]*for_each[^[:space:]]*(' include/ \
 #   | sed "s,^#define \([^[:space:]]*for_each[^[:space:]]*\)(.*$,  - '\1'," \
-#   | LC_ALL=C sort -u
+#   | sort | uniq
 ForEachMacros:
-  - '__ata_qc_for_each'
-  - '__bio_for_each_bvec'
-  - '__bio_for_each_segment'
-  - '__evlist__for_each_entry'
-  - '__evlist__for_each_entry_continue'
-  - '__evlist__for_each_entry_from'
-  - '__evlist__for_each_entry_reverse'
-  - '__evlist__for_each_entry_safe'
-  - '__for_each_mem_range'
-  - '__for_each_mem_range_rev'
-  - '__for_each_thread'
-  - '__hlist_for_each_rcu'
-  - '__map__for_each_symbol_by_name'
-  - '__perf_evlist__for_each_entry'
-  - '__perf_evlist__for_each_entry_reverse'
-  - '__perf_evlist__for_each_entry_safe'
-  - '__rq_for_each_bio'
-  - '__shost_for_each_device'
   - 'apei_estatus_for_each_section'
   - 'ata_for_each_dev'
   - 'ata_for_each_link'
+  - '__ata_qc_for_each'
   - 'ata_qc_for_each'
   - 'ata_qc_for_each_raw'
   - 'ata_qc_for_each_with_internal'
   - 'ax25_for_each'
   - 'ax25_uid_for_each'
+  - '__bio_for_each_bvec'
   - 'bio_for_each_bvec'
   - 'bio_for_each_bvec_all'
-  - 'bio_for_each_folio_all'
   - 'bio_for_each_integrity_vec'
+  - '__bio_for_each_segment'
   - 'bio_for_each_segment'
   - 'bio_for_each_segment_all'
   - 'bio_list_for_each'
   - 'bip_for_each_vec'
+  - 'bitmap_for_each_clear_region'
+  - 'bitmap_for_each_set_region'
+  - 'blkg_for_each_descendant_post'
+  - 'blkg_for_each_descendant_pre'
+  - 'blk_queue_for_each_rl'
   - 'bond_for_each_slave'
   - 'bond_for_each_slave_rcu'
-  - 'bpf__perf_for_each_map'
-  - 'bpf__perf_for_each_map_named'
   - 'bpf_for_each_spilled_reg'
-  - 'bpf_object__for_each_map'
-  - 'bpf_object__for_each_program'
-  - 'bpf_object__for_each_safe'
-  - 'bpf_perf_object__for_each'
   - 'btree_for_each_safe128'
   - 'btree_for_each_safe32'
   - 'btree_for_each_safe64'
@@ -119,7 +102,6 @@ ForEachMacros:
   - 'card_for_each_dev'
   - 'cgroup_taskset_for_each'
   - 'cgroup_taskset_for_each_leader'
-  - 'cpufreq_for_each_efficient_entry_idx'
   - 'cpufreq_for_each_entry'
   - 'cpufreq_for_each_entry_idx'
   - 'cpufreq_for_each_valid_entry'
@@ -127,22 +109,9 @@ ForEachMacros:
   - 'css_for_each_child'
   - 'css_for_each_descendant_post'
   - 'css_for_each_descendant_pre'
-  - 'damon_for_each_region'
-  - 'damon_for_each_region_safe'
-  - 'damon_for_each_scheme'
-  - 'damon_for_each_scheme_safe'
-  - 'damon_for_each_target'
-  - 'damon_for_each_target_safe'
-  - 'data__for_each_file'
-  - 'data__for_each_file_new'
-  - 'data__for_each_file_start'
   - 'device_for_each_child_node'
   - 'displayid_iter_for_each'
-  - 'dma_fence_array_for_each'
   - 'dma_fence_chain_for_each'
-  - 'dma_fence_unwrap_for_each'
-  - 'dma_resv_for_each_fence'
-  - 'dma_resv_for_each_fence_unlocked'
   - 'do_for_each_ftrace_op'
   - 'drm_atomic_crtc_for_each_plane'
   - 'drm_atomic_crtc_state_for_each_plane'
@@ -166,25 +135,6 @@ ForEachMacros:
   - 'drm_mm_for_each_node'
   - 'drm_mm_for_each_node_in_range'
   - 'drm_mm_for_each_node_safe'
-  - 'dsa_switch_for_each_available_port'
-  - 'dsa_switch_for_each_cpu_port'
-  - 'dsa_switch_for_each_port'
-  - 'dsa_switch_for_each_port_continue_reverse'
-  - 'dsa_switch_for_each_port_safe'
-  - 'dsa_switch_for_each_user_port'
-  - 'dsa_tree_for_each_user_port'
-  - 'dso__for_each_symbol'
-  - 'dsos__for_each_with_build_id'
-  - 'elf_hash_for_each_possible'
-  - 'elf_section__for_each_rel'
-  - 'elf_section__for_each_rela'
-  - 'elf_symtab__for_each_symbol'
-  - 'evlist__for_each_cpu'
-  - 'evlist__for_each_entry'
-  - 'evlist__for_each_entry_continue'
-  - 'evlist__for_each_entry_from'
-  - 'evlist__for_each_entry_reverse'
-  - 'evlist__for_each_entry_safe'
   - 'flow_action_for_each'
   - 'for_each_acpi_dev_match'
   - 'for_each_active_dev_scope'
@@ -192,11 +142,8 @@ ForEachMacros:
   - 'for_each_active_iommu'
   - 'for_each_aggr_pgid'
   - 'for_each_available_child_of_node'
-  - 'for_each_bench'
   - 'for_each_bio'
   - 'for_each_board_func_rsrc'
-  - 'for_each_btf_ext_rec'
-  - 'for_each_btf_ext_sec'
   - 'for_each_bvec'
   - 'for_each_card_auxs'
   - 'for_each_card_auxs_safe'
@@ -212,22 +159,17 @@ ForEachMacros:
   - 'for_each_child_of_node'
   - 'for_each_clear_bit'
   - 'for_each_clear_bit_from'
-  - 'for_each_clear_bitrange'
-  - 'for_each_clear_bitrange_from'
-  - 'for_each_cmd'
   - 'for_each_cmsghdr'
-  - 'for_each_collection'
-  - 'for_each_comp_order'
   - 'for_each_compatible_node'
   - 'for_each_component_dais'
   - 'for_each_component_dais_safe'
+  - 'for_each_comp_order'
   - 'for_each_console'
   - 'for_each_cpu'
   - 'for_each_cpu_and'
   - 'for_each_cpu_not'
   - 'for_each_cpu_wrap'
   - 'for_each_dapm_widgets'
-  - 'for_each_dedup_cand'
   - 'for_each_dev_addr'
   - 'for_each_dev_scope'
   - 'for_each_dma_cap_mask'
@@ -237,14 +179,13 @@ ForEachMacros:
   - 'for_each_dpcm_fe'
   - 'for_each_drhd_unit'
   - 'for_each_dss_dev'
+  - 'for_each_dtpm_table'
   - 'for_each_efi_memory_desc'
   - 'for_each_efi_memory_desc_in_map'
   - 'for_each_element'
   - 'for_each_element_extid'
   - 'for_each_element_id'
   - 'for_each_endpoint_of_node'
-  - 'for_each_event'
-  - 'for_each_event_tps'
   - 'for_each_evictable_lru'
   - 'for_each_fib6_node_rt_rcu'
   - 'for_each_fib6_walker_rt'
@@ -253,35 +194,31 @@ ForEachMacros:
   - 'for_each_free_mem_range'
   - 'for_each_free_mem_range_reverse'
   - 'for_each_func_rsrc'
-  - 'for_each_group_evsel'
-  - 'for_each_group_member'
   - 'for_each_hstate'
   - 'for_each_if'
-  - 'for_each_inject_fn'
-  - 'for_each_insn'
-  - 'for_each_insn_prefix'
-  - 'for_each_intid'
   - 'for_each_iommu'
   - 'for_each_ip_tunnel_rcu'
   - 'for_each_irq_nr'
-  - 'for_each_lang'
   - 'for_each_link_codecs'
   - 'for_each_link_cpus'
   - 'for_each_link_platforms'
   - 'for_each_lru'
   - 'for_each_matching_node'
   - 'for_each_matching_node_and_match'
+  - 'for_each_member'
+  - 'for_each_memcg_cache_index'
   - 'for_each_mem_pfn_range'
+  - '__for_each_mem_range'
   - 'for_each_mem_range'
+  - '__for_each_mem_range_rev'
   - 'for_each_mem_range_rev'
   - 'for_each_mem_region'
-  - 'for_each_member'
-  - 'for_each_memory'
   - 'for_each_migratetype_order'
-  - 'for_each_missing_reg'
+  - 'for_each_msi_entry'
+  - 'for_each_msi_entry_safe'
+  - 'for_each_msi_vector'
   - 'for_each_net'
   - 'for_each_net_continue_reverse'
-  - 'for_each_net_rcu'
   - 'for_each_netdev'
   - 'for_each_netdev_continue'
   - 'for_each_netdev_continue_rcu'
@@ -291,13 +228,12 @@ ForEachMacros:
   - 'for_each_netdev_rcu'
   - 'for_each_netdev_reverse'
   - 'for_each_netdev_safe'
+  - 'for_each_net_rcu'
   - 'for_each_new_connector_in_state'
   - 'for_each_new_crtc_in_state'
   - 'for_each_new_mst_mgr_in_state'
   - 'for_each_new_plane_in_state'
-  - 'for_each_new_plane_in_state_reverse'
   - 'for_each_new_private_obj_in_state'
-  - 'for_each_new_reg'
   - 'for_each_node'
   - 'for_each_node_by_name'
   - 'for_each_node_by_type'
@@ -313,20 +249,20 @@ ForEachMacros:
   - 'for_each_old_connector_in_state'
   - 'for_each_old_crtc_in_state'
   - 'for_each_old_mst_mgr_in_state'
-  - 'for_each_old_plane_in_state'
-  - 'for_each_old_private_obj_in_state'
   - 'for_each_oldnew_connector_in_state'
   - 'for_each_oldnew_crtc_in_state'
   - 'for_each_oldnew_mst_mgr_in_state'
   - 'for_each_oldnew_plane_in_state'
   - 'for_each_oldnew_plane_in_state_reverse'
   - 'for_each_oldnew_private_obj_in_state'
+  - 'for_each_old_plane_in_state'
+  - 'for_each_old_private_obj_in_state'
   - 'for_each_online_cpu'
   - 'for_each_online_node'
   - 'for_each_online_pgdat'
-  - 'for_each_path'
   - 'for_each_pci_bridge'
   - 'for_each_pci_dev'
+  - 'for_each_pci_msi_entry'
   - 'for_each_pcm_streams'
   - 'for_each_physmem_range'
   - 'for_each_populated_zone'
@@ -334,7 +270,6 @@ ForEachMacros:
   - 'for_each_present_cpu'
   - 'for_each_prime_number'
   - 'for_each_prime_number_from'
-  - 'for_each_probe_cache_entry'
   - 'for_each_process'
   - 'for_each_process_thread'
   - 'for_each_prop_codec_conf'
@@ -344,8 +279,6 @@ ForEachMacros:
   - 'for_each_prop_dlc_cpus'
   - 'for_each_prop_dlc_platforms'
   - 'for_each_property_of_node'
-  - 'for_each_reg'
-  - 'for_each_reg_filtered'
   - 'for_each_registered_fb'
   - 'for_each_requested_gpio'
   - 'for_each_requested_gpio_in_range'
@@ -355,12 +288,8 @@ ForEachMacros:
   - 'for_each_rtd_components'
   - 'for_each_rtd_cpu_dais'
   - 'for_each_rtd_dais'
-  - 'for_each_script'
-  - 'for_each_sec'
   - 'for_each_set_bit'
   - 'for_each_set_bit_from'
-  - 'for_each_set_bitrange'
-  - 'for_each_set_bitrange_from'
   - 'for_each_set_clump8'
   - 'for_each_sg'
   - 'for_each_sg_dma_page'
@@ -369,25 +298,18 @@ ForEachMacros:
   - 'for_each_sgtable_dma_sg'
   - 'for_each_sgtable_page'
   - 'for_each_sgtable_sg'
-  - 'for_each_shell_test'
   - 'for_each_sibling_event'
   - 'for_each_subelement'
   - 'for_each_subelement_extid'
   - 'for_each_subelement_id'
-  - 'for_each_sublist'
-  - 'for_each_subsystem'
-  - 'for_each_supported_activate_fn'
-  - 'for_each_supported_inject_fn'
-  - 'for_each_test'
+  - '__for_each_thread'
   - 'for_each_thread'
-  - 'for_each_token'
   - 'for_each_unicast_dest_pgid'
   - 'for_each_vsi'
   - 'for_each_wakeup_source'
   - 'for_each_zone'
   - 'for_each_zone_zonelist'
   - 'for_each_zone_zonelist_nodemask'
-  - 'func_for_each_insn'
   - 'fwnode_for_each_available_child_node'
   - 'fwnode_for_each_child_node'
   - 'fwnode_graph_for_each_endpoint'
@@ -401,13 +323,7 @@ ForEachMacros:
   - 'hash_for_each_possible_safe'
   - 'hash_for_each_rcu'
   - 'hash_for_each_safe'
-  - 'hashmap__for_each_entry'
-  - 'hashmap__for_each_entry_safe'
-  - 'hashmap__for_each_key_entry'
-  - 'hashmap__for_each_key_entry_safe'
   - 'hctx_for_each_ctx'
-  - 'hists__for_each_format'
-  - 'hists__for_each_sort_list'
   - 'hlist_bl_for_each_entry'
   - 'hlist_bl_for_each_entry_rcu'
   - 'hlist_bl_for_each_entry_safe'
@@ -423,6 +339,7 @@ ForEachMacros:
   - 'hlist_for_each_entry_rcu_notrace'
   - 'hlist_for_each_entry_safe'
   - 'hlist_for_each_entry_srcu'
+  - '__hlist_for_each_rcu'
   - 'hlist_for_each_safe'
   - 'hlist_nulls_for_each_entry'
   - 'hlist_nulls_for_each_entry_from'
@@ -430,6 +347,9 @@ ForEachMacros:
   - 'hlist_nulls_for_each_entry_safe'
   - 'i3c_bus_for_each_i2cdev'
   - 'i3c_bus_for_each_i3cdev'
+  - 'ide_host_for_each_port'
+  - 'ide_port_for_each_dev'
+  - 'ide_port_for_each_present_dev'
   - 'idr_for_each_entry'
   - 'idr_for_each_entry_continue'
   - 'idr_for_each_entry_continue_ul'
@@ -437,12 +357,7 @@ ForEachMacros:
   - 'in_dev_for_each_ifa_rcu'
   - 'in_dev_for_each_ifa_rtnl'
   - 'inet_bind_bucket_for_each'
-  - 'inet_lhash2_for_each_icsk'
-  - 'inet_lhash2_for_each_icsk_continue'
   - 'inet_lhash2_for_each_icsk_rcu'
-  - 'intlist__for_each_entry'
-  - 'intlist__for_each_entry_safe'
-  - 'kcore_copy__for_each_phdr'
   - 'key_for_each'
   - 'key_for_each_safe'
   - 'klp_for_each_func'
@@ -453,9 +368,7 @@ ForEachMacros:
   - 'klp_for_each_object_static'
   - 'kunit_suite_for_each_test_case'
   - 'kvm_for_each_memslot'
-  - 'kvm_for_each_memslot_in_gfn_range'
   - 'kvm_for_each_vcpu'
-  - 'libbpf_nla_for_each_attr'
   - 'list_for_each'
   - 'list_for_each_codec'
   - 'list_for_each_codec_safe'
@@ -475,7 +388,6 @@ ForEachMacros:
   - 'list_for_each_entry_safe_from'
   - 'list_for_each_entry_safe_reverse'
   - 'list_for_each_entry_srcu'
-  - 'list_for_each_from'
   - 'list_for_each_prev'
   - 'list_for_each_prev_safe'
   - 'list_for_each_safe'
@@ -483,18 +395,11 @@ ForEachMacros:
   - 'llist_for_each_entry'
   - 'llist_for_each_entry_safe'
   - 'llist_for_each_safe'
-  - 'map__for_each_symbol'
-  - 'map__for_each_symbol_by_name'
-  - 'map_for_each_event'
-  - 'map_for_each_metric'
-  - 'maps__for_each_entry'
-  - 'maps__for_each_entry_safe'
   - 'mci_for_each_dimm'
   - 'media_device_for_each_entity'
   - 'media_device_for_each_intf'
   - 'media_device_for_each_link'
   - 'media_device_for_each_pad'
-  - 'msi_for_each_desc'
   - 'nanddev_io_for_each_page'
   - 'netdev_for_each_lower_dev'
   - 'netdev_for_each_lower_private'
@@ -516,24 +421,9 @@ ForEachMacros:
   - 'of_property_for_each_string'
   - 'of_property_for_each_u32'
   - 'pci_bus_for_each_resource'
-  - 'pci_doe_for_each_off'
   - 'pcl_for_each_chunk'
   - 'pcl_for_each_segment'
   - 'pcm_for_each_format'
-  - 'perf_config_items__for_each_entry'
-  - 'perf_config_sections__for_each_entry'
-  - 'perf_config_set__for_each_entry'
-  - 'perf_cpu_map__for_each_cpu'
-  - 'perf_evlist__for_each_entry'
-  - 'perf_evlist__for_each_entry_reverse'
-  - 'perf_evlist__for_each_entry_safe'
-  - 'perf_evlist__for_each_evsel'
-  - 'perf_evlist__for_each_mmap'
-  - 'perf_hpp_list__for_each_format'
-  - 'perf_hpp_list__for_each_format_safe'
-  - 'perf_hpp_list__for_each_sort_list'
-  - 'perf_hpp_list__for_each_sort_list_safe'
-  - 'perf_pmu__for_each_hybrid_pmu'
   - 'ping_portaddr_for_each_entry'
   - 'plist_for_each'
   - 'plist_for_each_continue'
@@ -553,7 +443,6 @@ ForEachMacros:
   - 'rdma_for_each_block'
   - 'rdma_for_each_port'
   - 'rdma_umem_for_each_dma_block'
-  - 'resort_rb__for_each_entry'
   - 'resource_list_for_each_entry'
   - 'resource_list_for_each_entry_safe'
   - 'rhl_for_each_entry_rcu'
@@ -567,18 +456,15 @@ ForEachMacros:
   - 'rht_for_each_from'
   - 'rht_for_each_rcu'
   - 'rht_for_each_rcu_from'
+  - '__rq_for_each_bio'
   - 'rq_for_each_bvec'
   - 'rq_for_each_segment'
-  - 'rq_list_for_each'
-  - 'rq_list_for_each_safe'
   - 'scsi_for_each_prot_sg'
   - 'scsi_for_each_sg'
   - 'sctp_for_each_hentry'
   - 'sctp_skb_for_each'
-  - 'sec_for_each_insn'
-  - 'sec_for_each_insn_continue'
-  - 'sec_for_each_insn_from'
   - 'shdma_for_each_chan'
+  - '__shost_for_each_device'
   - 'shost_for_each_device'
   - 'sk_for_each'
   - 'sk_for_each_bound'
@@ -595,13 +481,7 @@ ForEachMacros:
   - 'snd_soc_dapm_widget_for_each_path_safe'
   - 'snd_soc_dapm_widget_for_each_sink_path'
   - 'snd_soc_dapm_widget_for_each_source_path'
-  - 'strlist__for_each_entry'
-  - 'strlist__for_each_entry_safe'
-  - 'sym_for_each_insn'
-  - 'sym_for_each_insn_continue_reverse'
-  - 'symbols__for_each_entry'
   - 'tb_property_for_each'
-  - 'tcf_act_for_each_action'
   - 'tcf_exts_for_each_action'
   - 'udp_portaddr_for_each_entry'
   - 'udp_portaddr_for_each_entry_rcu'
@@ -625,17 +505,15 @@ ForEachMacros:
   - 'xbc_node_for_each_array_value'
   - 'xbc_node_for_each_child'
   - 'xbc_node_for_each_key_value'
-  - 'xbc_node_for_each_subkey'
   - 'zorro_for_each_dev'
 
-IncludeBlocks: Preserve
+#IncludeBlocks: Preserve # Unknown to clang-format-5.0
 IncludeCategories:
   - Regex: '.*'
     Priority: 1
 IncludeIsMainRegex: '(Test)?$'
 IndentCaseLabels: false
-IndentGotoLabels: false
-IndentPPDirectives: None
+#IndentPPDirectives: None # Unknown to clang-format-5.0
 IndentWidth: 8
 IndentWrappedFunctionNames: false
 JavaScriptQuotes: Leave
@@ -645,13 +523,13 @@ MacroBlockBegin: ''
 MacroBlockEnd: ''
 MaxEmptyLinesToKeep: 1
 NamespaceIndentation: None
-ObjCBinPackProtocolList: Auto
+#ObjCBinPackProtocolList: Auto # Unknown to clang-format-5.0
 ObjCBlockIndentWidth: 8
 ObjCSpaceAfterProperty: true
 ObjCSpaceBeforeProtocolList: true
 
 # Taken from git's rules
-PenaltyBreakAssignment: 10
+#PenaltyBreakAssignment: 10 # Unknown to clang-format-4.0
 PenaltyBreakBeforeFirstCallParameter: 30
 PenaltyBreakComment: 10
 PenaltyBreakFirstLessLess: 0
@@ -662,14 +540,14 @@ PenaltyReturnTypeOnItsOwnLine: 60
 PointerAlignment: Right
 ReflowComments: false
 SortIncludes: false
-SortUsingDeclarations: false
+#SortUsingDeclarations: false # Unknown to clang-format-4.0
 SpaceAfterCStyleCast: false
 SpaceAfterTemplateKeyword: true
 SpaceBeforeAssignmentOperators: true
-SpaceBeforeCtorInitializerColon: true
-SpaceBeforeInheritanceColon: true
-SpaceBeforeParens: ControlStatementsExceptForEachMacros
-SpaceBeforeRangeBasedForLoopColon: true
+#SpaceBeforeCtorInitializerColon: true # Unknown to clang-format-5.0
+#SpaceBeforeInheritanceColon: true # Unknown to clang-format-5.0
+SpaceBeforeParens: ControlStatements
+#SpaceBeforeRangeBasedForLoopColon: true # Unknown to clang-format-5.0
 SpaceInEmptyParentheses: false
 SpacesBeforeTrailingComments: 1
 SpacesInAngles: false

.get_maintainer.ignore

@@ -1,4 +1,2 @@
-Alan Cox <alan@lxorguk.ukuu.org.uk>
-Alan Cox <root@hraefn.swansea.linux.org.uk>
 Christoph Hellwig <hch@lst.de>
 Marc Gonzalez <marc.w.gonzalez@free.fr>

.gitignore

@@ -37,8 +37,6 @@
 *.o
 *.o.*
 *.patch
-*.rmeta
-*.rsi
 *.s
 *.so
 *.so.dbg
@@ -47,7 +45,6 @@
 *.symversions
 *.tab.[ch]
 *.tar
-*.usyms
 *.xz
 *.zst
 Module.symvers
@@ -99,7 +96,6 @@ modules.order
 !.gitattributes
 !.gitignore
 !.mailmap
-!.rustfmt.toml
 
 #
 # Generated include files
@@ -165,6 +161,3 @@ x509.genkey
 
 # Documentation toolchain
 sphinx_*/
-
-# Rust analyzer configuration
-/rust-project.json

.mailmap

@@ -10,8 +10,6 @@
 # Please keep this list dictionary sorted.
 #
 Aaron Durbin <adurbin@google.com>
-Abel Vesa <abelvesa@kernel.org> <abel.vesa@nxp.com>
-Abel Vesa <abelvesa@kernel.org> <abelvesa@gmail.com>
 Abhinav Kumar <quic_abhinavk@quicinc.com> <abhinavk@codeaurora.org>
 Adam Oldham <oldhamca@gmail.com>
 Adam Radford <aradford@gmail.com>
@@ -47,33 +45,20 @@ Andrey Konovalov <andreyknvl@gmail.com> <andreyknvl@google.com>
 Andrey Ryabinin <ryabinin.a.a@gmail.com> <a.ryabinin@samsung.com>
 Andrey Ryabinin <ryabinin.a.a@gmail.com> <aryabinin@virtuozzo.com>
 Andrzej Hajda <andrzej.hajda@intel.com> <a.hajda@samsung.com>
-André Almeida <andrealmeid@igalia.com> <andrealmeid@collabora.com>
 Andy Adamson <andros@citi.umich.edu>
 Antoine Tenart <atenart@kernel.org> <antoine.tenart@bootlin.com>
 Antoine Tenart <atenart@kernel.org> <antoine.tenart@free-electrons.com>
 Antonio Ospite <ao2@ao2.it> <ao2@amarulasolutions.com>
-Anup Patel <anup@brainfault.org> <anup.patel@wdc.com>
 Archit Taneja <archit@ti.com>
 Ard Biesheuvel <ardb@kernel.org> <ard.biesheuvel@linaro.org>
 Arnaud Patard <arnaud.patard@rtp-net.org>
 Arnd Bergmann <arnd@arndb.de>
-Atish Patra <atishp@atishpatra.org> <atish.patra@wdc.com>
 Axel Dyks <xl@xlsigned.net>
 Axel Lin <axel.lin@gmail.com>
-Baolin Wang <baolin.wang@linux.alibaba.com> <baolin.wang@linaro.org>
-Baolin Wang <baolin.wang@linux.alibaba.com> <baolin.wang@spreadtrum.com>
-Baolin Wang <baolin.wang@linux.alibaba.com> <baolin.wang@unisoc.com>
-Baolin Wang <baolin.wang@linux.alibaba.com> <baolin.wang7@gmail.com>
 Bart Van Assche <bvanassche@acm.org> <bart.vanassche@sandisk.com>
 Bart Van Assche <bvanassche@acm.org> <bart.vanassche@wdc.com>
 Ben Gardner <bgardner@wabtec.com>
 Ben M Cahill <ben.m.cahill@intel.com>
-Ben Widawsky <bwidawsk@kernel.org> <ben@bwidawsk.net>
-Ben Widawsky <bwidawsk@kernel.org> <ben.widawsky@intel.com>
-Ben Widawsky <bwidawsk@kernel.org> <benjamin.widawsky@intel.com>
-Bjorn Andersson <andersson@kernel.org> <bjorn@kryo.se>
-Bjorn Andersson <andersson@kernel.org> <bjorn.andersson@linaro.org>
-Bjorn Andersson <andersson@kernel.org> <bjorn.andersson@sonymobile.com>
 Björn Steinbrink <B.Steinbrink@gmx.de>
 Björn Töpel <bjorn@kernel.org> <bjorn.topel@gmail.com>
 Björn Töpel <bjorn@kernel.org> <bjorn.topel@intel.com>
@@ -81,11 +66,8 @@ Boris Brezillon <bbrezillon@kernel.org> <b.brezillon.dev@gmail.com>
 Boris Brezillon <bbrezillon@kernel.org> <b.brezillon@overkiz.com>
 Boris Brezillon <bbrezillon@kernel.org> <boris.brezillon@bootlin.com>
 Boris Brezillon <bbrezillon@kernel.org> <boris.brezillon@free-electrons.com>
-Brendan Higgins <brendan.higgins@linux.dev> <brendanhiggins@google.com>
 Brian Avery <b.avery@hp.com>
 Brian King <brking@us.ibm.com>
-Brian Silverman <bsilver16384@gmail.com> <brian.silverman@bluerivertech.com>
-Cai Huoqing <cai.huoqing@linux.dev> <caihuoqing@baidu.com>
 Changbin Du <changbin.du@intel.com> <changbin.du@gmail.com>
 Changbin Du <changbin.du@intel.com> <changbin.du@intel.com>
 Chao Yu <chao@kernel.org> <chao2.yu@samsung.com>
@@ -95,16 +77,12 @@ Chris Chiu <chris.chiu@canonical.com> <chiu@endlessos.org>
 Christian Borntraeger <borntraeger@linux.ibm.com> <borntraeger@de.ibm.com>
 Christian Borntraeger <borntraeger@linux.ibm.com> <cborntra@de.ibm.com>
 Christian Borntraeger <borntraeger@linux.ibm.com> <borntrae@de.ibm.com>
-Christian Brauner <brauner@kernel.org> <christian@brauner.io>
-Christian Brauner <brauner@kernel.org> <christian.brauner@canonical.com>
-Christian Brauner <brauner@kernel.org> <christian.brauner@ubuntu.com>
-Christian Marangi <ansuelsmth@gmail.com>
 Christophe Ricard <christophe.ricard@gmail.com>
 Christoph Hellwig <hch@lst.de>
-Colin Ian King <colin.i.king@gmail.com> <colin.king@canonical.com>
+Colin Ian King <colin.king@intel.com> <colin.king@canonical.com>
+Colin Ian King <colin.king@intel.com> <colin.i.king@gmail.com>
 Corey Minyard <minyard@acm.org>
 Damian Hobson-Garcia <dhobsong@igel.co.jp>
-Dan Carpenter <error27@gmail.com> <dan.carpenter@oracle.com>
 Daniel Borkmann <daniel@iogearbox.net> <danborkmann@googlemail.com>
 Daniel Borkmann <daniel@iogearbox.net> <danborkmann@iogearbox.net>
 Daniel Borkmann <daniel@iogearbox.net> <daniel.borkmann@tik.ee.ethz.ch>
@@ -138,14 +116,11 @@ Filipe Lautert <filipe@icewall.org>
 Finn Thain <fthain@linux-m68k.org> <fthain@telegraphics.com.au>
 Franck Bui-Huu <vagabon.xyz@gmail.com>
 Frank Rowand <frowand.list@gmail.com> <frank.rowand@am.sony.com>
-Frank Rowand <frowand.list@gmail.com> <frank.rowand@sony.com>
 Frank Rowand <frowand.list@gmail.com> <frank.rowand@sonymobile.com>
 Frank Rowand <frowand.list@gmail.com> <frowand@mvista.com>
 Frank Zago <fzago@systemfabricworks.com>
 Gao Xiang <xiang@kernel.org> <gaoxiang25@huawei.com>
 Gao Xiang <xiang@kernel.org> <hsiangkao@aol.com>
-Gao Xiang <xiang@kernel.org> <hsiangkao@linux.alibaba.com>
-Gao Xiang <xiang@kernel.org> <hsiangkao@redhat.com>
 Gerald Schaefer <gerald.schaefer@linux.ibm.com> <geraldsc@de.ibm.com>
 Gerald Schaefer <gerald.schaefer@linux.ibm.com> <gerald.schaefer@de.ibm.com>
 Gerald Schaefer <gerald.schaefer@linux.ibm.com> <geraldsc@linux.vnet.ibm.com>
@@ -154,8 +129,6 @@ Greg Kroah-Hartman <gregkh@suse.de>
 Greg Kroah-Hartman <greg@kroah.com>
 Greg Kurz <groug@kaod.org> <gkurz@linux.vnet.ibm.com>
 Gregory CLEMENT <gregory.clement@bootlin.com> <gregory.clement@free-electrons.com>
-Guilherme G. Piccoli <kernel@gpiccoli.net> <gpiccoli@linux.vnet.ibm.com>
-Guilherme G. Piccoli <kernel@gpiccoli.net> <gpiccoli@canonical.com>
 Guo Ren <guoren@kernel.org> <guoren@linux.alibaba.com>
 Guo Ren <guoren@kernel.org> <ren_guo@c-sky.com>
 Gustavo Padovan <gustavo@las.ic.unicamp.br>
@@ -184,7 +157,6 @@ Jan Glauber <jan.glauber@gmail.com> <jang@de.ibm.com>
 Jan Glauber <jan.glauber@gmail.com> <jang@linux.vnet.ibm.com>
 Jan Glauber <jan.glauber@gmail.com> <jglauber@cavium.com>
 Jarkko Sakkinen <jarkko@kernel.org> <jarkko.sakkinen@linux.intel.com>
-Jarkko Sakkinen <jarkko@kernel.org> <jarkko@profian.com>
 Jason Gunthorpe <jgg@ziepe.ca> <jgg@mellanox.com>
 Jason Gunthorpe <jgg@ziepe.ca> <jgg@nvidia.com>
 Jason Gunthorpe <jgg@ziepe.ca> <jgunthorpe@obsidianresearch.com>
@@ -209,8 +181,6 @@ Jiri Slaby <jirislaby@kernel.org> <jslaby@novell.com>
 Jiri Slaby <jirislaby@kernel.org> <jslaby@suse.com>
 Jiri Slaby <jirislaby@kernel.org> <jslaby@suse.cz>
 Jiri Slaby <jirislaby@kernel.org> <xslaby@fi.muni.cz>
-Jisheng Zhang <jszhang@kernel.org> <jszhang@marvell.com>
-Jisheng Zhang <jszhang@kernel.org> <Jisheng.Zhang@synaptics.com>
 Johan Hovold <johan@kernel.org> <jhovold@gmail.com>
 Johan Hovold <johan@kernel.org> <johan@hovoldconsulting.com>
 John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
@@ -221,13 +191,10 @@ Jordan Crouse <jordan@cosmicpenguin.net> <jcrouse@codeaurora.org>
 <josh@joshtriplett.org> <josht@linux.vnet.ibm.com>
 <josh@joshtriplett.org> <josht@us.ibm.com>
 <josh@joshtriplett.org> <josht@vnet.ibm.com>
-Josh Poimboeuf <jpoimboe@kernel.org> <jpoimboe@redhat.com>
-Josh Poimboeuf <jpoimboe@kernel.org> <jpoimboe@us.ibm.com>
 Juha Yrjola <at solidboot.com>
 Juha Yrjola <juha.yrjola@nokia.com>
 Juha Yrjola <juha.yrjola@solidboot.com>
 Julien Thierry <julien.thierry.kdev@gmail.com> <julien.thierry@arm.com>
-Kalle Valo <kvalo@kernel.org> <kvalo@codeaurora.org>
 Kalyan Thota <quic_kalyant@quicinc.com> <kalyan_t@codeaurora.org>
 Kay Sievers <kay.sievers@vrfy.org>
 Kees Cook <keescook@chromium.org> <kees.cook@canonical.com>
@@ -237,14 +204,12 @@ Kees Cook <keescook@chromium.org> <kees@ubuntu.com>
 Keith Busch <kbusch@kernel.org> <keith.busch@intel.com>
 Keith Busch <kbusch@kernel.org> <keith.busch@linux.intel.com>
 Kenneth W Chen <kenneth.w.chen@intel.com>
-Kirill Tkhai <tkhai@ya.ru> <ktkhai@virtuozzo.com>
 Konstantin Khlebnikov <koct9i@gmail.com> <khlebnikov@yandex-team.ru>
 Konstantin Khlebnikov <koct9i@gmail.com> <k.khlebnikov@samsung.com>
 Koushik <raghavendra.koushik@neterion.com>
 Krishna Manikandan <quic_mkrishn@quicinc.com> <mkrishn@codeaurora.org>
 Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski.k@gmail.com>
 Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski@samsung.com>
-Krzysztof Kozlowski <krzk@kernel.org> <krzysztof.kozlowski@canonical.com>
 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 Kuogee Hsieh <quic_khsieh@quicinc.com> <khsieh@codeaurora.org>
 Leonardo Bras <leobras.c@gmail.com> <leonardo@linux.ibm.com>
@@ -258,8 +223,6 @@ Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@web.de>
 <linux-hardening@vger.kernel.org> <kernel-hardening@lists.openwall.com>
 Li Yang <leoyang.li@nxp.com> <leoli@freescale.com>
 Li Yang <leoyang.li@nxp.com> <leo@zh-kernel.org>
-Lorenzo Pieralisi <lpieralisi@kernel.org> <lorenzo.pieralisi@arm.com>
-Luca Ceresoli <luca.ceresoli@bootlin.com> <luca@lucaceresoli.net>
 Lukasz Luba <lukasz.luba@arm.com> <l.luba@partner.samsung.com>
 Maciej W. Rozycki <macro@mips.com> <macro@imgtec.com>
 Maciej W. Rozycki <macro@orcam.me.uk> <macro@linux-mips.org>
@@ -275,7 +238,6 @@ Mark Yao <markyao0591@gmail.com> <mark.yao@rock-chips.com>
 Martin Kepplinger <martink@posteo.de> <martin.kepplinger@ginzinger.com>
 Martin Kepplinger <martink@posteo.de> <martin.kepplinger@puri.sm>
 Martin Kepplinger <martink@posteo.de> <martin.kepplinger@theobroma-systems.com>
-Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> <martyna.szapar-mudlaw@intel.com>
 Mathieu Othacehe <m.othacehe@gmail.com>
 Matthew Wilcox <willy@infradead.org> <matthew.r.wilcox@intel.com>
 Matthew Wilcox <willy@infradead.org> <matthew@wil.cx>
@@ -320,7 +282,6 @@ Morten Welinder <welinder@troll.com>
 Mythri P K <mythripk@ti.com>
 Nadia Yvette Chambers <nyc@holomorphy.com> William Lee Irwin III <wli@holomorphy.com>
 Nathan Chancellor <nathan@kernel.org> <natechancellor@gmail.com>
-Neil Armstrong <neil.armstrong@linaro.org> <narmstrong@baylibre.com>
 Nguyen Anh Quynh <aquynh@gmail.com>
 Nicholas Piggin <npiggin@gmail.com> <npiggen@suse.de>
 Nicholas Piggin <npiggin@gmail.com> <npiggin@kernel.dk>
@@ -338,7 +299,6 @@ Oleksij Rempel <linux@rempel-privat.de> <external.Oleksij.Rempel@de.bosch.com>
 Oleksij Rempel <linux@rempel-privat.de> <fixed-term.Oleksij.Rempel@de.bosch.com>
 Oleksij Rempel <linux@rempel-privat.de> <o.rempel@pengutronix.de>
 Oleksij Rempel <linux@rempel-privat.de> <ore@pengutronix.de>
-Oliver Upton <oliver.upton@linux.dev> <oupton@google.com>
 Pali Rohár <pali@kernel.org> <pali.rohar@gmail.com>
 Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
 Patrick Mochel <mochel@digitalimplant.org>
@@ -354,8 +314,7 @@ Peter Oruba <peter@oruba.de>
 Pratyush Anand <pratyush.anand@gmail.com> <pratyush.anand@st.com>
 Praveen BP <praveenbp@ti.com>
 Punit Agrawal <punitagrawal@gmail.com> <punit.agrawal@arm.com>
-Qais Yousef <qyousef@layalina.io> <qais.yousef@imgtec.com>
-Qais Yousef <qyousef@layalina.io> <qais.yousef@arm.com>
+Qais Yousef <qsyousef@gmail.com> <qais.yousef@imgtec.com>
 Quentin Monnet <quentin@isovalent.com> <quentin.monnet@netronome.com>
 Quentin Perret <qperret@qperret.net> <quentin.perret@arm.com>
 Rafael J. Wysocki <rjw@rjwysocki.net> <rjw@sisk.pl>
@@ -368,9 +327,6 @@ Rémi Denis-Courmont <rdenis@simphalempin.com>
 Ricardo Ribalda <ribalda@kernel.org> <ricardo@ribalda.com>
 Ricardo Ribalda <ribalda@kernel.org> Ricardo Ribalda Delgado <ribalda@kernel.org>
 Ricardo Ribalda <ribalda@kernel.org> <ricardo.ribalda@gmail.com>
-Roman Gushchin <roman.gushchin@linux.dev> <guro@fb.com>
-Roman Gushchin <roman.gushchin@linux.dev> <guroan@gmail.com>
-Roman Gushchin <roman.gushchin@linux.dev> <klamm@yandex-team.ru>
 Ross Zwisler <zwisler@kernel.org> <ross.zwisler@linux.intel.com>
 Rudolf Marek <R.Marek@sh.cvut.cz>
 Rui Saraiva <rmps@joel.ist.utl.pt>
@@ -388,7 +344,6 @@ Sean Nyekjaer <sean@geanix.com> <sean.nyekjaer@prevas.dk>
 Sebastian Reichel <sre@kernel.org> <sebastian.reichel@collabora.co.uk>
 Sebastian Reichel <sre@kernel.org> <sre@debian.org>
 Sedat Dilek <sedat.dilek@gmail.com> <sedat.dilek@credativ.de>
-Seth Forshee <sforshee@kernel.org> <seth.forshee@canonical.com>
 Shiraz Hashim <shiraz.linux.kernel@gmail.com> <shiraz.hashim@st.com>
 Shuah Khan <shuah@kernel.org> <shuahkhan@gmail.com>
 Shuah Khan <shuah@kernel.org> <shuah.khan@hp.com>
@@ -422,11 +377,6 @@ Uwe Kleine-König <ukleinek@strlen.de>
 Uwe Kleine-König <ukl@pengutronix.de>
 Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
 Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
-Vasily Averin <vasily.averin@linux.dev> <vvs@virtuozzo.com>
-Vasily Averin <vasily.averin@linux.dev> <vvs@openvz.org>
-Vasily Averin <vasily.averin@linux.dev> <vvs@parallels.com>
-Vasily Averin <vasily.averin@linux.dev> <vvs@sw.ru>
-Valentin Schneider <vschneid@redhat.com> <valentin.schneider@arm.com>
 Vinod Koul <vkoul@kernel.org> <vinod.koul@intel.com>
 Vinod Koul <vkoul@kernel.org> <vinod.koul@linux.intel.com>
 Vinod Koul <vkoul@kernel.org> <vkoul@infradead.org>

.rustfmt.toml

@@ -1,12 +0,0 @@
-edition = "2021"
-newline_style = "Unix"
-
-# Unstable options that help catching some mistakes in formatting and that we may want to enable
-# when they become stable.
-#
-# They are kept here since they are useful to run from time to time.
-#format_code_in_doc_comments = true
-#reorder_impl_items = true
-#comment_width = 100
-#wrap_comments = true
-#normalize_comments = true

CREDITS

@@ -315,11 +315,6 @@ S: Via Delle Palme, 9
 S: Terni 05100
 S: Italy
 
-N: Ohad Ben Cohen
-E: ohad@wizery.com
-D: Remote Processor (remoteproc) subsystem
-D: Remote Processor Messaging (rpmsg) subsystem
-
 N: Krzysztof Benedyczak
 E: golbi@mat.uni.torun.pl
 W: http://www.mat.uni.torun.pl/~golbi
@@ -627,10 +622,6 @@ S: 48287 Sawleaf
 S: Fremont, California 94539
 S: USA
 
-N: Tomas Cech
-E: sleep_walker@suse.com
-D: arm/palm treo support
-
 N: Florent Chabaud
 E: florent.chabaud@polytechnique.org
 D: software suspend
@@ -899,12 +890,6 @@ S: 3000 FORE Drive
 S: Warrendale, Pennsylvania 15086
 S: USA
 
-N: Ludovic Desroches
-E: ludovic.desroches@microchip.com
-D: Maintainer for ARM/Microchip (AT91) SoC support
-D: Author of ADC, pinctrl, XDMA and SDHCI drivers for this platform
-S: France
-
 N: Martin Devera
 E: devik@cdi.cz
 W: http://luxik.cdi.cz/~devik/qos/
@@ -3495,10 +3480,6 @@ D: wd33c93 SCSI driver (linux-m68k)
 S: San Jose, California
 S: USA
 
-N: Joonyoung Shim
-E: y0922.shim@samsung.com
-D: Samsung Exynos DRM drivers
-
 N: Robert Siemer
 E: Robert.Siemer@gmx.de
 P: 2048/C99A4289 2F DC 17 2E 56 62 01 C8  3D F2 AC 09 F2 E5 DD EE

Documentation/ABI/obsolete/procfs-i8k

@@ -1,10 +0,0 @@
-What:		/proc/i8k
-Date:		November 2001
-KernelVersion:	2.4.14
-Contact:	Pali Rohár <pali@kernel.org>
-Description:	Legacy interface for getting/setting sensor information like
-		fan speed, temperature, serial number, hotkey status etc
-		on Dell Laptops.
-		Since the driver is now using the standard hwmon sysfs interface,
-		the procfs interface is deprecated.
-Users:		https://github.com/vitorafsr/i8kutils

Documentation/ABI/removed/sysfs-mce

@@ -1,37 +0,0 @@
-What:		/sys/devices/system/machinecheck/machinecheckX/tolerant
-Contact:	Borislav Petkov <bp@suse.de>
-Date:		Dec, 2021
-Description:
-		Unused and obsolete after the advent of recoverable machine
-		checks (see last sentence below) and those are present since
-		2010 (Nehalem).
-
-		Original description:
-
-		The entries appear for each CPU, but they are truly shared
-		between all CPUs.
-
-		Tolerance level. When a machine check exception occurs for a
-		non corrected machine check the kernel can take different
-		actions.
-
-		Since machine check exceptions can happen any time it is
-		sometimes risky for the kernel to kill a process because it
-		defies normal kernel locking rules. The tolerance level
-		configures how hard the kernel tries to recover even at some
-		risk of	deadlock. Higher tolerant values trade potentially
-		better uptime with the risk of a crash or even corruption
-		(for tolerant >= 3).
-
-		==  ===========================================================
-		 0  always panic on uncorrected errors, log corrected errors
-		 1  panic or SIGBUS on uncorrected errors, log corrected errors
-		 2  SIGBUS or log uncorrected errors, log corrected errors
-		 3  never panic or SIGBUS, log all errors (for testing only)
-		==  ===========================================================
-
-		Default: 1
-
-		Note this only makes a difference if the CPU allows recovery
-		from a machine check exception. Current x86 CPUs generally
-		do not.

Documentation/ABI/stable/sysfs-block

@@ -155,55 +155,6 @@ Description:
 		last zone of the device which may be smaller.
 
 
-What:		/sys/block/<disk>/queue/crypto/
-Date:		February 2022
-Contact:	linux-block@vger.kernel.org
-Description:
-		The presence of this subdirectory of /sys/block/<disk>/queue/
-		indicates that the device supports inline encryption.  This
-		subdirectory contains files which describe the inline encryption
-		capabilities of the device.  For more information about inline
-		encryption, refer to Documentation/block/inline-encryption.rst.
-
-
-What:		/sys/block/<disk>/queue/crypto/max_dun_bits
-Date:		February 2022
-Contact:	linux-block@vger.kernel.org
-Description:
-		[RO] This file shows the maximum length, in bits, of data unit
-		numbers accepted by the device in inline encryption requests.
-
-
-What:		/sys/block/<disk>/queue/crypto/modes/<mode>
-Date:		February 2022
-Contact:	linux-block@vger.kernel.org
-Description:
-		[RO] For each crypto mode (i.e., encryption/decryption
-		algorithm) the device supports with inline encryption, a file
-		will exist at this location.  It will contain a hexadecimal
-		number that is a bitmask of the supported data unit sizes, in
-		bytes, for that crypto mode.
-
-		Currently, the crypto modes that may be supported are:
-
-		   * AES-256-XTS
-		   * AES-128-CBC-ESSIV
-		   * Adiantum
-
-		For example, if a device supports AES-256-XTS inline encryption
-		with data unit sizes of 512 and 4096 bytes, the file
-		/sys/block/<disk>/queue/crypto/modes/AES-256-XTS will exist and
-		will contain "0x1200".
-
-
-What:		/sys/block/<disk>/queue/crypto/num_keyslots
-Date:		February 2022
-Contact:	linux-block@vger.kernel.org
-Description:
-		[RO] This file shows the number of keyslots the device has for
-		use with inline encryption.
-
-
 What:		/sys/block/<disk>/queue/dax
 Date:		June 2016
 Contact:	linux-block@vger.kernel.org
@@ -260,15 +211,6 @@ Description:
 		for discards, and don't read this file.
 
 
-What:		/sys/block/<disk>/queue/dma_alignment
-Date:		May 2022
-Contact:	linux-block@vger.kernel.org
-Description:
-		Reports the alignment that user space addresses must have to be
-		used for raw block device access with O_DIRECT and other driver
-		specific passthrough mechanisms.
-
-
 What:		/sys/block/<disk>/queue/fua
 Date:		May 2018
 Contact:	linux-block@vger.kernel.org

Documentation/ABI/stable/sysfs-bus-mhi

@@ -19,13 +19,3 @@ Description:	The file holds the OEM PK Hash value of the endpoint device
 		read without having the device power on at least once, the file
 		will read all 0's.
 Users:		Any userspace application or clients interested in device info.
-
-What:           /sys/bus/mhi/devices/.../soc_reset
-Date:           April 2022
-KernelVersion:  5.19
-Contact:        mhi@lists.linux.dev
-Description:	Initiates a SoC reset on the MHI controller.  A SoC reset is
-                a reset of last resort, and will require a complete re-init.
-                This can be useful as a method of recovery if the device is
-                non-responsive, or as a means of loading new firmware as a
-                system administration task.

Documentation/ABI/stable/sysfs-devices-system-cpu

@@ -86,10 +86,6 @@ What:           /sys/devices/system/cpu/cpuX/topology/die_cpus
 Description:    internal kernel map of CPUs within the same die.
 Values:         hexadecimal bitmask.
 
-What:           /sys/devices/system/cpu/cpuX/topology/ppin
-Description:    per-socket protected processor inventory number
-Values:         hexadecimal.
-
 What:           /sys/devices/system/cpu/cpuX/topology/die_cpus_list
 Description:    human-readable list of CPUs within the same die.
                 The format is like 0-3, 8-11, 14,17.

Documentation/ABI/stable/sysfs-driver-dma-idxd

@@ -41,14 +41,14 @@ KernelVersion:  5.6.0
 Contact:        dmaengine@vger.kernel.org
 Description:    The maximum number of groups can be created under this device.
 
-What:           /sys/bus/dsa/devices/dsa<m>/max_read_buffers
-Date:           Dec 10, 2021
-KernelVersion:  5.17.0
+What:           /sys/bus/dsa/devices/dsa<m>/max_tokens
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
 Contact:        dmaengine@vger.kernel.org
-Description:    The total number of read buffers supported by this device.
-		The read buffers represent resources within the DSA
+Description:    The total number of bandwidth tokens supported by this device.
+		The bandwidth tokens represent resources within the DSA
 		implementation, and these resources are allocated by engines to
-		support operations. See DSA spec v1.2 9.2.4 Total Read Buffers.
+		support operations.
 
 What:           /sys/bus/dsa/devices/dsa<m>/max_transfer_size
 Date:           Oct 25, 2019
@@ -115,13 +115,13 @@ KernelVersion:  5.6.0
 Contact:        dmaengine@vger.kernel.org
 Description:    To indicate if this device is configurable or not.
 
-What:           /sys/bus/dsa/devices/dsa<m>/read_buffer_limit
-Date:           Dec 10, 2021
-KernelVersion:  5.17.0
+What:           /sys/bus/dsa/devices/dsa<m>/token_limit
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
 Contact:        dmaengine@vger.kernel.org
-Description:    The maximum number of read buffers that may be in use at
+Description:    The maximum number of bandwidth tokens that may be in use at
 		one time by operations that access low bandwidth memory in the
-		device. See DSA spec v1.2 9.2.8 GENCFG on Global Read Buffer Limit.
+		device.
 
 What:		/sys/bus/dsa/devices/dsa<m>/cmd_status
 Date:		Aug 28, 2020
@@ -220,73 +220,8 @@ Contact:	dmaengine@vger.kernel.org
 Description:	Show the current number of entries in this WQ if WQ Occupancy
 		Support bit WQ capabilities is 1.
 
-What:		/sys/bus/dsa/devices/wq<m>.<n>/enqcmds_retries
-Date		Oct 29, 2021
-KernelVersion:	5.17.0
-Contact:	dmaengine@vger.kernel.org
-Description:	Indicate the number of retires for an enqcmds submission on a sharedwq.
-		A max value to set attribute is capped at 64.
-
-What:		/sys/bus/dsa/devices/wq<m>.<n>/op_config
-Date:		Sept 14, 2022
-KernelVersion:	6.0.0
-Contact:	dmaengine@vger.kernel.org
-Description:	Shows the operation capability bits displayed in bitmap format
-		presented by %*pb printk() output format specifier.
-		The attribute can be configured when the WQ is disabled in
-		order to configure the WQ to accept specific bits that
-		correlates to the operations allowed. It's visible only
-		on platforms that support the capability.
-
 What:           /sys/bus/dsa/devices/engine<m>.<n>/group_id
 Date:           Oct 25, 2019
 KernelVersion:  5.6.0
 Contact:        dmaengine@vger.kernel.org
 Description:    The group that this engine belongs to.
-
-What:		/sys/bus/dsa/devices/group<m>.<n>/use_read_buffer_limit
-Date:		Dec 10, 2021
-KernelVersion:	5.17.0
-Contact:	dmaengine@vger.kernel.org
-Description:	Enable the use of global read buffer limit for the group. See DSA
-		spec v1.2 9.2.18 GRPCFG Use Global Read Buffer Limit.
-
-What:		/sys/bus/dsa/devices/group<m>.<n>/read_buffers_allowed
-Date:		Dec 10, 2021
-KernelVersion:	5.17.0
-Contact:	dmaengine@vger.kernel.org
-Description:	Indicates max number of read buffers that may be in use at one time
-		by all engines in the group. See DSA spec v1.2 9.2.18 GRPCFG Read
-		Buffers Allowed.
-
-What:		/sys/bus/dsa/devices/group<m>.<n>/read_buffers_reserved
-Date:		Dec 10, 2021
-KernelVersion:	5.17.0
-Contact:	dmaengine@vger.kernel.org
-Description:	Indicates the number of Read Buffers reserved for the use of
-		engines in the group. See DSA spec v1.2 9.2.18 GRPCFG Read Buffers
-		Reserved.
-
-What:		/sys/bus/dsa/devices/group<m>.<n>/desc_progress_limit
-Date:		Sept 14, 2022
-KernelVersion:	6.0.0
-Contact:	dmaengine@vger.kernel.org
-Description:	Allows control of the number of work descriptors that can be
-		concurrently processed by an engine in the group as a fraction
-		of the Maximum Work Descriptors in Progress value specified in
-		the ENGCAP register. The acceptable values are 0 (default),
-		1 (1/2 of max value), 2 (1/4 of the max value), and 3 (1/8 of
-		the max value). It's visible only on platforms that support
-		the capability.
-
-What:		/sys/bus/dsa/devices/group<m>.<n>/batch_progress_limit
-Date:		Sept 14, 2022
-KernelVersion:	6.0.0
-Contact:	dmaengine@vger.kernel.org
-Description:	Allows control of the number of batch descriptors that can be
-		concurrently processed by an engine in the group as a fraction
-		of the Maximum Batch Descriptors in Progress value specified in
-		the ENGCAP register. The acceptable values are 0 (default),
-		1 (1/2 of max value), 2 (1/4 of the max value), and 3 (1/8 of
-		the max value). It's visible only on platforms that support
-		the capability.

Documentation/ABI/stable/sysfs-driver-firmware-zynqmp

@@ -113,144 +113,3 @@ Description:
 		    # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
 
 Users:		Xilinx
-
-What:		/sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
-Date:		Feb 2022
-KernelVersion:	5.18
-Contact:	"Ronak Jain" <ronak.jain@xilinx.com>
-Description:
-		This sysfs interface allows user to configure features at
-		runtime. The user can enable or disable features running at
-		firmware as well as the user can configure the parameters of
-		the features at runtime. The supported features are over
-		temperature and external watchdog. Here, the external watchdog
-		is completely different than the /dev/watchdog as the external
-		watchdog is running on the firmware and it is used to monitor
-		the health of firmware not APU(Linux). Also, the external
-		watchdog is interfaced outside of the zynqmp soc.
-
-		The supported config ids are for the feature configuration is,
-		1. PM_FEATURE_OVERTEMP_STATUS = 1, the user can enable or
-		disable the over temperature feature.
-		2. PM_FEATURE_OVERTEMP_VALUE = 2, the user can configure the
-		over temperature limit in Degree Celsius.
-		3. PM_FEATURE_EXTWDT_STATUS = 3, the user can enable or disable
-		the external watchdog feature.
-		4. PM_FEATURE_EXTWDT_VALUE = 4, the user can configure the
-		external watchdog feature.
-
-		Usage:
-
-		Select over temperature config ID to enable/disable feature
-		# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
-
-		Check over temperature config ID is selected or not
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
-		The expected result is 1.
-
-		Select over temperature config ID to configure OT limit
-		# echo 2 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
-
-		Check over temperature config ID is selected or not
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
-		The expected result is 2.
-
-		Select external watchdog config ID to enable/disable feature
-		# echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
-
-		Check external watchdog config ID is selected or not
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
-		The expected result is 3.
-
-		Select external watchdog config ID to configure time interval
-		# echo 4 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
-
-		Check external watchdog config ID is selected or not
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
-		The expected result is 4.
-
-Users:		Xilinx
-
-What:		/sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
-Date:		Feb 2022
-KernelVersion:	5.18
-Contact:	"Ronak Jain" <ronak.jain@xilinx.com>
-Description:
-		This sysfs interface allows to configure features at runtime.
-		The user can enable or disable features running at firmware.
-		Also, the user can configure the parameters of the features
-		at runtime. The supported features are over temperature and
-		external watchdog. Here, the external watchdog is completely
-		different than the /dev/watchdog as the external watchdog is
-		running on the firmware and it is used to monitor the health
-		of firmware not APU(Linux). Also, the external watchdog is
-		interfaced outside of the zynqmp soc.
-
-		By default the features are disabled in the firmware. The user
-		can enable features by querying appropriate config id of the
-		features.
-
-		The default limit for the over temperature is 90 Degree Celsius.
-		The default timer interval for the external watchdog is 570ms.
-
-		The supported config ids are for the feature configuration is,
-		1. PM_FEATURE_OVERTEMP_STATUS = 1, the user can enable or
-		disable the over temperature feature.
-		2. PM_FEATURE_OVERTEMP_VALUE = 2, the user can configure the
-		over temperature limit in Degree Celsius.
-		3. PM_FEATURE_EXTWDT_STATUS = 3, the user can enable or disable
-		the external watchdog feature.
-		4. PM_FEATURE_EXTWDT_VALUE = 4, the user can configure the
-		external watchdog feature.
-
-		Usage:
-
-		Enable over temperature feature
-		# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
-		# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
-
-		Check whether the over temperature feature is enabled or not
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
-		The expected result is 1.
-
-		Disable over temperature feature
-		# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
-		# echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
-
-		Check whether the over temperature feature is disabled or not
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
-		The expected result is 0.
-
-		Configure over temperature limit to 50 Degree Celsius
-		# echo 2 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
-		# echo 50 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
-
-		Check whether the over temperature limit is configured or not
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
-		The expected result is 50.
-
-		Enable external watchdog feature
-		# echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
-		# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
-
-		Check whether the external watchdog feature is enabled or not
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
-		The expected result is 1.
-
-		Disable external watchdog feature
-		# echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
-		# echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
-
-		Check whether the external watchdog feature is disabled or not
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
-		The expected result is 0.
-
-		Configure external watchdog timer interval to 500ms
-		# echo 4 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
-		# echo 500 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
-
-		Check whether the external watchdog timer interval is configured or not
-		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
-		The expected result is 500.
-
-Users:		Xilinx

Documentation/ABI/stable/sysfs-driver-mlxreg-io

@@ -1,7 +1,7 @@
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_health
 Date:		June 2018
 KernelVersion:	4.19
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	This file shows ASIC health status. The possible values are:
 		0 - health failed, 2 - health OK, 3 - ASIC in booting state.
 
@@ -11,7 +11,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version
 Date:		June 2018
 KernelVersion:	4.19
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show with which CPLD versions have been burned
 		on carrier and switch boards.
 
@@ -20,7 +20,7 @@ Description:	These files show with which CPLD versions have been burned
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/fan_dir
 Date:		December 2018
 KernelVersion:	5.0
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	This file shows the system fans direction:
 		forward direction - relevant bit is set 0;
 		reversed direction - relevant bit is set 1.
@@ -30,7 +30,7 @@ Description:	This file shows the system fans direction:
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version
 Date:		November 2018
 KernelVersion:	5.0
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show with which CPLD versions have been burned
 		on LED or Gearbox board.
 
@@ -39,7 +39,7 @@ Description:	These files show with which CPLD versions have been burned
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable
 Date:		November 2018
 KernelVersion:	5.0
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files enable and disable the access to the JTAG domain.
 		By default access to the JTAG domain is disabled.
 
@@ -48,7 +48,7 @@ Description:	These files enable and disable the access to the JTAG domain.
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio
 Date:		June 2018
 KernelVersion:	4.19
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	This file allows iio devices selection.
 
 		Attribute select_iio can be written with 0 or with 1. It
@@ -62,7 +62,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu1_on
 		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_down
 Date:		June 2018
 KernelVersion:	4.19
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files allow asserting system power cycling, switching
 		power supply units on and off and system's main power domain
 		shutdown.
@@ -89,7 +89,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_short_pb
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_reset
 Date:		June 2018
 KernelVersion:	4.19
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show the system reset cause, as following: power
 		auxiliary outage or power refresh, ASIC thermal shutdown, halt,
 		hotswap, watchdog, firmware reset, long press power button,
@@ -106,7 +106,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_system
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_voltmon_upgrade_fail
 Date:		November 2018
 KernelVersion:	5.0
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show the system reset cause, as following: ComEx
 		power fail, reset from ComEx, system platform reset, reset
 		due to voltage monitor devices upgrade failure,
@@ -119,7 +119,7 @@ Description:	These files show the system reset cause, as following: ComEx
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version
 Date:		November 2018
 KernelVersion:	5.0
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show with which CPLD versions have been burned
 		on LED board.
 
@@ -133,7 +133,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd
 Date:		June 2019
 KernelVersion:	5.3
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show the system reset cause, as following:
 		COMEX thermal shutdown; wathchdog power off or reset was derived
 		by one of the next components: COMEX, switch board or by Small Form
@@ -148,7 +148,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config1
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config2
 Date:		January 2020
 KernelVersion:	5.6
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show system static topology identification
 		like system's static I2C topology, number and type of FPGA
 		devices within the system and so on.
@@ -161,7 +161,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_soc
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_pwr_off
 Date:		January 2020
 KernelVersion:	5.6
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show the system reset causes, as following: reset
 		due to AC power failure, reset invoked from software by
 		assertion reset signal through CPLD. reset caused by signal
@@ -173,7 +173,7 @@ Description:	These files show the system reset causes, as following: reset
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pcie_asic_reset_dis
 Date:		January 2020
 KernelVersion:	5.6
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	This file allows to retain ASIC up during PCIe root complex
 		reset, when attribute is set 1.
 
@@ -182,7 +182,7 @@ Description:	This file allows to retain ASIC up during PCIe root complex
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/vpd_wp
 Date:		January 2020
 KernelVersion:	5.6
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	This file allows to overwrite system VPD hardware write
 		protection when attribute is set 1.
 
@@ -191,7 +191,7 @@ Description:	This file allows to overwrite system VPD hardware write
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/voltreg_update_status
 Date:		January 2020
 KernelVersion:	5.6
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	This file exposes the configuration update status of burnable
 		voltage regulator devices. The status values are as following:
 		0 - OK; 1 - CRC failure; 2 = I2C failure; 3 - in progress.
@@ -201,7 +201,7 @@ Description:	This file exposes the configuration update status of burnable
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ufm_version
 Date:		January 2020
 KernelVersion:	5.6
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	This file exposes the firmware version of burnable voltage
 		regulator devices.
 
@@ -217,7 +217,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version_min
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version_min
 Date:		July 2020
 KernelVersion:	5.9
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show with which CPLD part numbers and minor
 		versions have been burned CPLD devices equipped on a
 		system.
@@ -467,78 +467,3 @@ Description:	These files provide the maximum powered required for line card
 		feeding and line card configuration Id.
 
 		The files are read only.
-
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/phy_reset
-Date:		May 2022
-KernelVersion:	5.19
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
-Description:	This file allows to reset PHY 88E1548 when attribute is set 0
-		due to some abnormal PHY behavior.
-		Expected behavior:
-		When phy_reset is written 1, all PHY 88E1548 are released
-		from the reset state, when 0 - are hold in reset state.
-
-		The files are read/write.
-
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/mac_reset
-Date:		May 2022
-KernelVersion:	5.19
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
-Description:	This file allows to reset ASIC MT52132 when attribute is set 0
-		due to some abnormal ASIC behavior.
-		Expected behavior:
-		When mac_reset is written 1, the ASIC MT52132 is released
-		from the reset state, when 0 - is hold in reset state.
-
-		The files are read/write.
-
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/qsfp_pwr_good
-Date:		May 2022
-KernelVersion:	5.19
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
-Description:	This file shows QSFP ports power status. The value is set to 0
-		when one of any QSFP ports is plugged. The value is set to 1 when
-		there are no any QSFP ports are plugged.
-		The possible values are:
-		0 - Power good, 1 - Not power good.
-
-		The files are read only.
-
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic2_health
-Date:		July 2022
-KernelVersion:	5.20
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
-Description:	This file shows 2-nd ASIC health status. The possible values are:
-		0 - health failed, 2 - health OK, 3 - ASIC in booting state.
-
-		The file is read only.
-
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_reset
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic2_reset
-Date:		July 2022
-KernelVersion:	5.20
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
-Description:	These files allow to each of ASICs by writing 1.
-
-		The files are write only.
-
-
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/comm_chnl_ready
-Date:		July 2022
-KernelVersion:	5.20
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
-Description:	This file is used to indicate remote end (for example BMC) that system
-	        host CPU is ready for sending telemetry data to remote end.
-		For indication the file should be written 1.
-
-		The file is write only.
-
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config3
-Date:		January 2020
-KernelVersion:	5.6
-Contact:	Vadim Pasternak <vadimp@nvidia.com>
-Description:	The file indicates COME module hardware configuration.
-		The value is pushed by hardware through GPIO pins.
-		The purpose is to expose some minor BOM changes for the same system SKU.
-
-		The file is read only.

Documentation/ABI/stable/sysfs-module

@@ -38,7 +38,7 @@ What:		/sys/module/<MODULENAME>/srcversion
 Date:		Jun 2005
 Description:
 		If the module source has MODULE_VERSION, this file will contain
-		the checksum of the source code.
+		the checksum of the the source code.
 
 What:		/sys/module/<MODULENAME>/version
 Date:		Jun 2005

Documentation/ABI/testing/configfs-usb-gadget-mass-storage

@@ -19,7 +19,7 @@ KernelVersion:	3.13
 Description:
 		The attributes:
 
-		============	==============================================
+		===========	==============================================
 		file		The path to the backing file for the LUN.
 				Required if LUN is not marked as removable.
 		ro		Flag specifying access to the LUN shall be
@@ -32,10 +32,4 @@ Description:
 				being a CD-ROM.
 		nofua		Flag specifying that FUA flag
 				in SCSI WRITE(10,12)
-		forced_eject	This write-only file is useful only when
-				the function is active. It causes the backing
-				file to be forcibly detached from the LUN,
-				regardless of whether the host has allowed it.
-				Any non-zero number of bytes written will
-				result in ejection.
-		============	==============================================
+		===========	==============================================

Documentation/ABI/testing/configfs-usb-gadget-uac1

@@ -6,7 +6,7 @@ Description:
 
 		=====================	=======================================
 		c_chmask		capture channel mask
-		c_srate			list of capture sampling rates (comma-separated)
+		c_srate			capture sampling rate
 		c_ssize			capture sample size (bytes)
 		c_mute_present		capture mute control enable
 		c_volume_present	capture volume control enable
@@ -17,7 +17,7 @@ Description:
 		c_volume_res		capture volume control resolution
 					(in 1/256 dB)
 		p_chmask		playback channel mask
-		p_srate			list of playback sampling rates (comma-separated)
+		p_srate			playback sampling rate
 		p_ssize			playback sample size (bytes)
 		p_mute_present		playback mute control enable
 		p_volume_present	playback volume control enable
@@ -29,5 +29,4 @@ Description:
 					(in 1/256 dB)
 		req_number		the number of pre-allocated requests
 					for both capture and playback
-		function_name		name of the interface
 		=====================	=======================================

Documentation/ABI/testing/configfs-usb-gadget-uac2

@@ -6,9 +6,8 @@ Description:
 
 		=====================	=======================================
 		c_chmask		capture channel mask
-		c_srate			list of capture sampling rates (comma-separated)
+		c_srate			capture sampling rate
 		c_ssize			capture sample size (bytes)
-		c_hs_bint		capture bInterval for HS/SS (1-4: fixed, 0: auto)
 		c_sync			capture synchronization type
 					(async/adaptive)
 		c_mute_present		capture mute control enable
@@ -21,9 +20,8 @@ Description:
 					(in 1/256 dB)
 		fb_max			maximum extra bandwidth in async mode
 		p_chmask		playback channel mask
-		p_srate			list of playback sampling rates (comma-separated)
+		p_srate			playback sampling rate
 		p_ssize			playback sample size (bytes)
-		p_hs_bint		playback bInterval for HS/SS (1-4: fixed, 0: auto)
 		p_mute_present		playback mute control enable
 		p_volume_present	playback volume control enable
 		p_volume_min		playback volume control min value
@@ -34,5 +32,4 @@ Description:
 					(in 1/256 dB)
 		req_number		the number of pre-allocated requests
 					for both capture and playback
-		function_name		name of the interface
 		=====================	=======================================

Documentation/ABI/testing/configfs-usb-gadget-uvc

@@ -7,7 +7,6 @@ Description:	UVC function directory
 		streaming_maxburst	0..15 (ss only)
 		streaming_maxpacket	1..1023 (fs), 1..3072 (hs/ss)
 		streaming_interval	1..16
-		function_name		string [32]
 		===================	=============================
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/control

Documentation/ABI/testing/debugfs-cros-ec

@@ -54,25 +54,3 @@ Description:
 		this feature.
 
 		Output will be in the format: "0x%08x\n".
-
-What:		/sys/kernel/debug/<cros-ec-device>/suspend_timeout_ms
-Date:		August 2022
-KernelVersion:	6.1
-Description:
-		Some ECs have a feature where they will track transitions of
-		a hardware-controlled sleep line, such as Intel's SLP_S0 line,
-		in order to detect cases where a system failed to go into deep
-		sleep states. The suspend_timeout_ms file controls the amount of
-		time in milliseconds the EC will wait before declaring a sleep
-		timeout event and attempting to wake the system.
-
-		Supply 0 to use the default value coded into EC firmware. Supply
-		65535 (EC_HOST_SLEEP_TIMEOUT_INFINITE) to disable the EC sleep
-		failure detection mechanism. Values in between 0 and 65535
-		indicate the number of milliseconds the EC should wait after a
-		sleep transition before declaring a timeout. This includes both
-		the duration after a sleep command was received but before the
-		hardware line changed, as well as the duration between when the
-		hardware line changed and the kernel sent an EC resume command.
-
-		Output will be in the format: "%u\n".

Documentation/ABI/testing/debugfs-driver-habanalabs

@@ -12,7 +12,24 @@ What:           /sys/kernel/debug/habanalabs/hl<n>/clk_gate
 Date:           May 2020
 KernelVersion:  5.8
 Contact:        ogabbay@kernel.org
-Description:    This setting is now deprecated as clock gating is handled solely by the f/w
+Description:    Allow the root user to disable/enable in runtime the clock
+                gating mechanism in Gaudi. Due to how Gaudi is built, the
+                clock gating needs to be disabled in order to access the
+                registers of the TPC and MME engines. This is sometimes needed
+                during debug by the user and hence the user needs this option.
+                The user can supply a bitmask value, each bit represents
+                a different engine to disable/enable its clock gating feature.
+                The bitmask is composed of 20 bits:
+
+		=======   ============
+                0  -  7   DMA channels
+                8  - 11   MME engines
+                12 - 19   TPC engines
+		=======   ============
+
+                The bit's location of a specific engine can be determined
+                using (1 << GAUDI_ENGINE_ID_*). GAUDI_ENGINE_ID_* values
+                are defined in uapi habanalabs.h file in enum gaudi_engine_id
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/command_buffers
 Date:           Jan 2019
@@ -101,15 +118,6 @@ Description:    Specify the size of the DMA transaction when using DMA to read
                 When the write is finished, the user can read the "data_dma"
                 blob
 
-What:           /sys/kernel/debug/habanalabs/hl<n>/dump_razwi_events
-Date:           Aug 2022
-KernelVersion:  5.20
-Contact:        fkassabri@habana.ai
-Description:    Dumps all razwi events to dmesg if exist.
-                After reading the status register of an existing event
-                the routine will clear the status register.
-                Usage: cat dump_razwi_events
-
 What:           /sys/kernel/debug/habanalabs/hl<n>/dump_security_violations
 Date:           Jan 2021
 KernelVersion:  5.12
@@ -130,16 +138,14 @@ Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
 Description:    Sets I2C device address for I2C transaction that is generated
-                by the device's CPU, Not available when device is loaded with secured
-                firmware
+                by the device's CPU
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_bus
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
 Description:    Sets I2C bus address for I2C transaction that is generated by
-                the device's CPU, Not available when device is loaded with secured
-                firmware
+                the device's CPU
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_data
 Date:           Jan 2019
@@ -147,60 +153,32 @@ KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
 Description:    Triggers an I2C transaction that is generated by the device's
                 CPU. Writing to this file generates a write transaction while
-                reading from the file generates a read transaction, Not available
-                when device is loaded with secured firmware
-
-What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_len
-Date:           Dec 2021
-KernelVersion:  5.17
-Contact:        obitton@habana.ai
-Description:    Sets I2C length in bytes for I2C transaction that is generated by
-                the device's CPU, Not available when device is loaded with secured
-                firmware
+                reading from the file generates a read transaction
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_reg
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
 Description:    Sets I2C register id for I2C transaction that is generated by
-                the device's CPU, Not available when device is loaded with secured
-                firmware
+                the device's CPU
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/led0
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
-Description:    Sets the state of the first S/W led on the device, Not available
-                when device is loaded with secured firmware
+Description:    Sets the state of the first S/W led on the device
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/led1
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
-Description:    Sets the state of the second S/W led on the device, Not available
-                when device is loaded with secured firmware
+Description:    Sets the state of the second S/W led on the device
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/led2
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
-Description:    Sets the state of the third S/W led on the device, Not available
-                when device is loaded with secured firmware
-
-What:           /sys/kernel/debug/habanalabs/hl<n>/memory_scrub
-Date:           May 2022
-KernelVersion:  5.19
-Contact:        dhirschfeld@habana.ai
-Description:    Allows the root user to scrub the dram memory. The scrubbing
-                value can be set using the debugfs file memory_scrub_val.
-
-What:           /sys/kernel/debug/habanalabs/hl<n>/memory_scrub_val
-Date:           May 2022
-KernelVersion:  5.19
-Contact:        dhirschfeld@habana.ai
-Description:    The value to which the dram will be set to when the user
-                scrubs the dram using 'memory_scrub' debugfs file and
-                the scrubbing value when using module param 'memory_scrub'
+Description:    Sets the state of the third S/W led on the device
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/mmu
 Date:           Jan 2019
@@ -222,30 +200,6 @@ Description:    Check and display page fault or access violation mmu errors for
                 echo "0x200" > /sys/kernel/debug/habanalabs/hl0/mmu_error
                 cat /sys/kernel/debug/habanalabs/hl0/mmu_error
 
-What:           /sys/kernel/debug/habanalabs/hl<n>/monitor_dump
-Date:           Mar 2022
-KernelVersion:  5.19
-Contact:        osharabi@habana.ai
-Description:    Allows the root user to dump monitors status from the device's
-                protected config space.
-                This property is a binary blob that contains the result of the
-                monitors registers dump.
-                This custom interface is needed (instead of using the generic
-                Linux user-space PCI mapping) because this space is protected
-                and cannot be accessed using PCI read.
-                This interface doesn't support concurrency in the same device.
-                Only supported on GAUDI.
-
-What:           /sys/kernel/debug/habanalabs/hl<n>/monitor_dump_trig
-Date:           Mar 2022
-KernelVersion:  5.19
-Contact:        osharabi@habana.ai
-Description:    Triggers dump of monitor data. The value to trigger the operation
-                must be 1. Triggering the monitor dump operation initiates dump of
-                current registers values of all monitors.
-                When the write is finished, the user can read the "monitor_dump"
-                blob
-
 What:           /sys/kernel/debug/habanalabs/hl<n>/set_power_state
 Date:           Jan 2019
 KernelVersion:  5.1
@@ -272,19 +226,18 @@ Description:    Gets the state dump occurring on a CS timeout or failure.
                 Writing an integer X discards X state dumps, so that the
                 next read would return X+1-st newest state dump.
 
+What:           /sys/kernel/debug/habanalabs/hl<n>/timeout_locked
+Date:           Sep 2021
+KernelVersion:  5.16
+Contact:        obitton@habana.ai
+Description:    Sets the command submission timeout value in seconds.
+
 What:           /sys/kernel/debug/habanalabs/hl<n>/stop_on_err
 Date:           Mar 2020
 KernelVersion:  5.6
 Contact:        ogabbay@kernel.org
 Description:    Sets the stop-on_error option for the device engines. Value of
                 "0" is for disable, otherwise enable.
-                Relevant only for GOYA and GAUDI.
-
-What:           /sys/kernel/debug/habanalabs/hl<n>/timeout_locked
-Date:           Sep 2021
-KernelVersion:  5.16
-Contact:        obitton@habana.ai
-Description:    Sets the command submission timeout value in seconds.
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/userptr
 Date:           Jan 2019
@@ -295,7 +248,7 @@ Description:    Displays a list with information about the currently user
                 to DMA addresses
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/userptr_lookup
-Date:           Oct 2021
+Date:           Aug 2021
 KernelVersion:  5.15
 Contact:        ogabbay@kernel.org
 Description:    Allows to search for specific user pointers (user virtual

Documentation/ABI/testing/debugfs-hisi-hpre

@@ -1,164 +1,140 @@
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/cluster[0-3]/regs
-Date:		Sep 2019
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump debug registers from the HPRE cluster.
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/cluster[0-3]/regs
+Date:           Sep 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump debug registers from the HPRE cluster.
 		Only available for PF.
 
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/cluster[0-3]/cluster_ctrl
-Date:		Sep 2019
-Contact:	linux-crypto@vger.kernel.org
-Description:	Write the HPRE core selection in the cluster into this file,
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/cluster[0-3]/cluster_ctrl
+Date:           Sep 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    Write the HPRE core selection in the cluster into this file,
 		and then we can read the debug information of the core.
 		Only available for PF.
 
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/rdclr_en
-Date:		Sep 2019
-Contact:	linux-crypto@vger.kernel.org
-Description:	HPRE cores debug registers read clear control. 1 means enable
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/rdclr_en
+Date:           Sep 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    HPRE cores debug registers read clear control. 1 means enable
 		register read clear, otherwise 0. Writing to this file has no
 		functional effect, only enable or disable counters clear after
 		reading of these registers.
 		Only available for PF.
 
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/current_qm
-Date:		Sep 2019
-Contact:	linux-crypto@vger.kernel.org
-Description:	One HPRE controller has one PF and multiple VFs, each function
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/current_qm
+Date:           Sep 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    One HPRE controller has one PF and multiple VFs, each function
 		has a QM. Select the QM which below qm refers to.
 		Only available for PF.
 
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/alg_qos
-Date:		Jun 2021
-Contact:	linux-crypto@vger.kernel.org
-Description:	The <bdf> is related the function for PF and VF.
-		HPRE driver supports to configure each function's QoS, the driver
-		supports to write <bdf> value to alg_qos in the host. Such as
-		"echo <bdf> value > alg_qos". The qos value is 1~1000, means
-		1/1000~1000/1000 of total QoS. The driver reading alg_qos to
-		get related QoS in the host and VM, Such as "cat alg_qos".
-
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/regs
-Date:		Sep 2019
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump debug registers from the HPRE.
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/regs
+Date:           Sep 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump debug registers from the HPRE.
 		Only available for PF.
 
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/regs
-Date:		Sep 2019
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump debug registers from the QM.
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/qm/regs
+Date:           Sep 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump debug registers from the QM.
 		Available for PF and VF in host. VF in guest currently only
 		has one debug register.
 
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/current_q
-Date:		Sep 2019
-Contact:	linux-crypto@vger.kernel.org
-Description:	One QM may contain multiple queues. Select specific queue to
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/qm/current_q
+Date:           Sep 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    One QM may contain multiple queues. Select specific queue to
 		show its debug registers in above regs.
 		Only available for PF.
 
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/clear_enable
-Date:		Sep 2019
-Contact:	linux-crypto@vger.kernel.org
-Description:	QM debug registers(regs) read clear control. 1 means enable
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/qm/clear_enable
+Date:           Sep 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    QM debug registers(regs) read clear control. 1 means enable
 		register read clear, otherwise 0.
 		Writing to this file has no functional effect, only enable or
 		disable counters clear after reading of these registers.
 		Only available for PF.
 
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/err_irq
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the number of invalid interrupts for
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/qm/err_irq
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the number of invalid interrupts for
 		QM task completion.
 		Available for both PF and VF, and take no other effect on HPRE.
 
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/aeq_irq
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the number of QM async event queue interrupts.
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/qm/aeq_irq
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the number of QM async event queue interrupts.
 		Available for both PF and VF, and take no other effect on HPRE.
 
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/abnormal_irq
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the number of interrupts for QM abnormal event.
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/qm/abnormal_irq
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the number of interrupts for QM abnormal event.
 		Available for both PF and VF, and take no other effect on HPRE.
 
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/create_qp_err
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the number of queue allocation errors.
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/qm/create_qp_err
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the number of queue allocation errors.
 		Available for both PF and VF, and take no other effect on HPRE.
 
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/mb_err
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the number of failed QM mailbox commands.
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/qm/mb_err
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the number of failed QM mailbox commands.
 		Available for both PF and VF, and take no other effect on HPRE.
 
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/status
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the status of the QM.
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/qm/status
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the status of the QM.
 		Four states: initiated, started, stopped and closed.
 		Available for both PF and VF, and take no other effect on HPRE.
 
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/diff_regs
-Date:		Mar 2022
-Contact:	linux-crypto@vger.kernel.org
-Description:	QM debug registers(regs) read hardware register value. This
-		node is used to show the change of the qm register values. This
-		node can be help users to check the change of register values.
-
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/diff_regs
-Date:		Mar 2022
-Contact:	linux-crypto@vger.kernel.org
-Description:	HPRE debug registers(regs) read hardware register value. This
-		node is used to show the change of the register values. This
-		node can be help users to check the change of register values.
-
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_cnt
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the total number of sent requests.
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_cnt
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the total number of sent requests.
 		Available for both PF and VF, and take no other effect on HPRE.
 
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/recv_cnt
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the total number of received requests.
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/recv_cnt
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the total number of received requests.
 		Available for both PF and VF, and take no other effect on HPRE.
 
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_busy_cnt
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the total number of requests sent
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_busy_cnt
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the total number of requests sent
 		with returning busy.
 		Available for both PF and VF, and take no other effect on HPRE.
 
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_fail_cnt
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the total number of completed but error requests.
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_fail_cnt
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the total number of completed but error requests.
 		Available for both PF and VF, and take no other effect on HPRE.
 
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/invalid_req_cnt
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the total number of invalid requests being received.
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/invalid_req_cnt
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the total number of invalid requests being received.
 		Available for both PF and VF, and take no other effect on HPRE.
 
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/overtime_thrhld
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Set the threshold time for counting the request which is
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/overtime_thrhld
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Set the threshold time for counting the request which is
 		processed longer than the threshold.
 		0: disable(default), 1: 1 microsecond.
 		Available for both PF and VF, and take no other effect on HPRE.
 
-What:		/sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/over_thrhld_cnt
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the total number of time out requests.
+What:           /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/over_thrhld_cnt
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the total number of time out requests.
 		Available for both PF and VF, and take no other effect on HPRE.

Documentation/ABI/testing/debugfs-hisi-sec

@@ -1,137 +1,113 @@
-What:		/sys/kernel/debug/hisi_sec2/<bdf>/clear_enable
-Date:		Oct 2019
-Contact:	linux-crypto@vger.kernel.org
-Description:	Enabling/disabling of clear action after reading
+What:           /sys/kernel/debug/hisi_sec2/<bdf>/clear_enable
+Date:           Oct 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    Enabling/disabling of clear action after reading
 		the SEC debug registers.
 		0: disable, 1: enable.
 		Only available for PF, and take no other effect on SEC.
 
-What:		/sys/kernel/debug/hisi_sec2/<bdf>/current_qm
-Date:		Oct 2019
-Contact:	linux-crypto@vger.kernel.org
-Description:	One SEC controller has one PF and multiple VFs, each function
+What:           /sys/kernel/debug/hisi_sec2/<bdf>/current_qm
+Date:           Oct 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    One SEC controller has one PF and multiple VFs, each function
 		has a QM. This file can be used to select the QM which below
 		qm refers to.
 		Only available for PF.
 
-What:		/sys/kernel/debug/hisi_sec2/<bdf>/alg_qos
-Date:		Jun 2021
-Contact:	linux-crypto@vger.kernel.org
-Description:	The <bdf> is related the function for PF and VF.
-		SEC driver supports to configure each function's QoS, the driver
-		supports to write <bdf> value to alg_qos in the host. Such as
-		"echo <bdf> value > alg_qos". The qos value is 1~1000, means
-		1/1000~1000/1000 of total QoS. The driver reading alg_qos to
-		get related QoS in the host and VM, Such as "cat alg_qos".
-
-What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/qm_regs
-Date:		Oct 2019
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump of QM related debug registers.
+What:           /sys/kernel/debug/hisi_sec2/<bdf>/qm/qm_regs
+Date:           Oct 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump of QM related debug registers.
 		Available for PF and VF in host. VF in guest currently only
 		has one debug register.
 
-What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/current_q
-Date:		Oct 2019
-Contact:	linux-crypto@vger.kernel.org
-Description:	One QM of SEC may contain multiple queues. Select specific
+What:           /sys/kernel/debug/hisi_sec2/<bdf>/qm/current_q
+Date:           Oct 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    One QM of SEC may contain multiple queues. Select specific
 		queue to show its debug registers in above 'regs'.
 		Only available for PF.
 
-What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/clear_enable
-Date:		Oct 2019
-Contact:	linux-crypto@vger.kernel.org
-Description:	Enabling/disabling of clear action after reading
+What:           /sys/kernel/debug/hisi_sec2/<bdf>/qm/clear_enable
+Date:           Oct 2019
+Contact:        linux-crypto@vger.kernel.org
+Description:    Enabling/disabling of clear action after reading
 		the SEC's QM debug registers.
 		0: disable, 1: enable.
 		Only available for PF, and take no other effect on SEC.
 
-What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/err_irq
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the number of invalid interrupts for
+What:           /sys/kernel/debug/hisi_sec2/<bdf>/qm/err_irq
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the number of invalid interrupts for
 		QM task completion.
 		Available for both PF and VF, and take no other effect on SEC.
 
-What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/aeq_irq
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the number of QM async event queue interrupts.
+What:           /sys/kernel/debug/hisi_sec2/<bdf>/qm/aeq_irq
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the number of QM async event queue interrupts.
 		Available for both PF and VF, and take no other effect on SEC.
 
-What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/abnormal_irq
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the number of interrupts for QM abnormal event.
+What:           /sys/kernel/debug/hisi_sec2/<bdf>/qm/abnormal_irq
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the number of interrupts for QM abnormal event.
 		Available for both PF and VF, and take no other effect on SEC.
 
-What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/create_qp_err
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the number of queue allocation errors.
+What:           /sys/kernel/debug/hisi_sec2/<bdf>/qm/create_qp_err
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the number of queue allocation errors.
 		Available for both PF and VF, and take no other effect on SEC.
 
-What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/mb_err
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the number of failed QM mailbox commands.
+What:           /sys/kernel/debug/hisi_sec2/<bdf>/qm/mb_err
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the number of failed QM mailbox commands.
 		Available for both PF and VF, and take no other effect on SEC.
 
-What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/status
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the status of the QM.
+What:           /sys/kernel/debug/hisi_sec2/<bdf>/qm/status
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the status of the QM.
 		Four states: initiated, started, stopped and closed.
 		Available for both PF and VF, and take no other effect on SEC.
 
-What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/diff_regs
-Date:		Mar 2022
-Contact:	linux-crypto@vger.kernel.org
-Description:	QM debug registers(regs) read hardware register value. This
-		node is used to show the change of the qm register values. This
-		node can be help users to check the change of register values.
-
-What:		/sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/diff_regs
-Date:		Mar 2022
-Contact:	linux-crypto@vger.kernel.org
-Description:	SEC debug registers(regs) read hardware register value. This
-		node is used to show the change of the register values. This
-		node can be help users to check the change of register values.
-
-What:		/sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/send_cnt
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the total number of sent requests.
+What:           /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/send_cnt
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the total number of sent requests.
 		Available for both PF and VF, and take no other effect on SEC.
 
-What:		/sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/recv_cnt
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the total number of received requests.
+What:           /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/recv_cnt
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the total number of received requests.
 		Available for both PF and VF, and take no other effect on SEC.
 
-What:		/sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/send_busy_cnt
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the total number of requests sent with returning busy.
+What:           /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/send_busy_cnt
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the total number of requests sent with returning busy.
 		Available for both PF and VF, and take no other effect on SEC.
 
-What:		/sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/err_bd_cnt
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the total number of BD type error requests
+What:           /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/err_bd_cnt
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the total number of BD type error requests
 		to be received.
 		Available for both PF and VF, and take no other effect on SEC.
 
-What:		/sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/invalid_req_cnt
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the total number of invalid requests being received.
+What:           /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/invalid_req_cnt
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the total number of invalid requests being received.
 		Available for both PF and VF, and take no other effect on SEC.
 
-What:		/sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/done_flag_cnt
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the total number of completed but marked error requests
+What:           /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/done_flag_cnt
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the total number of completed but marked error requests
 		to be received.
 		Available for both PF and VF, and take no other effect on SEC.

Documentation/ABI/testing/debugfs-hisi-zip

@@ -1,138 +1,114 @@
-What:		/sys/kernel/debug/hisi_zip/<bdf>/comp_core[01]/regs
-Date:		Nov 2018
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump of compression cores related debug registers.
+What:           /sys/kernel/debug/hisi_zip/<bdf>/comp_core[01]/regs
+Date:           Nov 2018
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump of compression cores related debug registers.
 		Only available for PF.
 
-What:		/sys/kernel/debug/hisi_zip/<bdf>/decomp_core[0-5]/regs
-Date:		Nov 2018
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump of decompression cores related debug registers.
+What:           /sys/kernel/debug/hisi_zip/<bdf>/decomp_core[0-5]/regs
+Date:           Nov 2018
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump of decompression cores related debug registers.
 		Only available for PF.
 
-What:		/sys/kernel/debug/hisi_zip/<bdf>/clear_enable
-Date:		Nov 2018
-Contact:	linux-crypto@vger.kernel.org
-Description:	Compression/decompression core debug registers read clear
+What:           /sys/kernel/debug/hisi_zip/<bdf>/clear_enable
+Date:           Nov 2018
+Contact:        linux-crypto@vger.kernel.org
+Description:    Compression/decompression core debug registers read clear
 		control. 1 means enable register read clear, otherwise 0.
 		Writing to this file has no functional effect, only enable or
 		disable counters clear after reading of these registers.
 		Only available for PF.
 
-What:		/sys/kernel/debug/hisi_zip/<bdf>/current_qm
-Date:		Nov 2018
-Contact:	linux-crypto@vger.kernel.org
-Description:	One ZIP controller has one PF and multiple VFs, each function
+What:           /sys/kernel/debug/hisi_zip/<bdf>/current_qm
+Date:           Nov 2018
+Contact:        linux-crypto@vger.kernel.org
+Description:    One ZIP controller has one PF and multiple VFs, each function
 		has a QM. Select the QM which below qm refers to.
 		Only available for PF.
 
-What:		/sys/kernel/debug/hisi_zip/<bdf>/alg_qos
-Date:		Jun 2021
-Contact:	linux-crypto@vger.kernel.org
-Description:	The <bdf> is related the function for PF and VF.
-		ZIP driver supports to configure each function's QoS, the driver
-		supports to write <bdf> value to alg_qos in the host. Such as
-		"echo <bdf> value > alg_qos". The qos value is 1~1000, means
-		1/1000~1000/1000 of total QoS. The driver reading alg_qos to
-		get related QoS in the host and VM, Such as "cat alg_qos".
-
-What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/regs
-Date:		Nov 2018
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump of QM related debug registers.
+What:           /sys/kernel/debug/hisi_zip/<bdf>/qm/regs
+Date:           Nov 2018
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump of QM related debug registers.
 		Available for PF and VF in host. VF in guest currently only
 		has one debug register.
 
-What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/current_q
-Date:		Nov 2018
-Contact:	linux-crypto@vger.kernel.org
-Description:	One QM may contain multiple queues. Select specific queue to
+What:           /sys/kernel/debug/hisi_zip/<bdf>/qm/current_q
+Date:           Nov 2018
+Contact:        linux-crypto@vger.kernel.org
+Description:    One QM may contain multiple queues. Select specific queue to
 		show its debug registers in above regs.
 		Only available for PF.
 
-What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/clear_enable
-Date:		Nov 2018
-Contact:	linux-crypto@vger.kernel.org
-Description:	QM debug registers(regs) read clear control. 1 means enable
+What:           /sys/kernel/debug/hisi_zip/<bdf>/qm/clear_enable
+Date:           Nov 2018
+Contact:        linux-crypto@vger.kernel.org
+Description:    QM debug registers(regs) read clear control. 1 means enable
 		register read clear, otherwise 0.
 		Writing to this file has no functional effect, only enable or
 		disable counters clear after reading of these registers.
 		Only available for PF.
 
-What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/err_irq
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the number of invalid interrupts for
+What:           /sys/kernel/debug/hisi_zip/<bdf>/qm/err_irq
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the number of invalid interrupts for
 		QM task completion.
 		Available for both PF and VF, and take no other effect on ZIP.
 
-What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/aeq_irq
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the number of QM async event queue interrupts.
+What:           /sys/kernel/debug/hisi_zip/<bdf>/qm/aeq_irq
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the number of QM async event queue interrupts.
 		Available for both PF and VF, and take no other effect on ZIP.
 
-What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/abnormal_irq
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the number of interrupts for QM abnormal event.
+What:           /sys/kernel/debug/hisi_zip/<bdf>/qm/abnormal_irq
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the number of interrupts for QM abnormal event.
 		Available for both PF and VF, and take no other effect on ZIP.
 
-What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/create_qp_err
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the number of queue allocation errors.
+What:           /sys/kernel/debug/hisi_zip/<bdf>/qm/create_qp_err
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the number of queue allocation errors.
 		Available for both PF and VF, and take no other effect on ZIP.
 
-What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/mb_err
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the number of failed QM mailbox commands.
+What:           /sys/kernel/debug/hisi_zip/<bdf>/qm/mb_err
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the number of failed QM mailbox commands.
 		Available for both PF and VF, and take no other effect on ZIP.
 
-What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/status
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the status of the QM.
+What:           /sys/kernel/debug/hisi_zip/<bdf>/qm/status
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the status of the QM.
 		Four states: initiated, started, stopped and closed.
 		Available for both PF and VF, and take no other effect on ZIP.
 
-What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/diff_regs
-Date:		Mar 2022
-Contact:	linux-crypto@vger.kernel.org
-Description:	QM debug registers(regs) read hardware register value. This
-		node is used to show the change of the qm registers value. This
-		node can be help users to check the change of register values.
-
-What:		/sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/diff_regs
-Date:		Mar 2022
-Contact:	linux-crypto@vger.kernel.org
-Description:	ZIP debug registers(regs) read hardware register value. This
-		node is used to show the change of the registers value. this
-		node can be help users to check the change of register values.
-
-What:		/sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/send_cnt
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the total number of sent requests.
+What:           /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/send_cnt
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the total number of sent requests.
 		Available for both PF and VF, and take no other effect on ZIP.
 
-What:		/sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/recv_cnt
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the total number of received requests.
+What:           /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/recv_cnt
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the total number of received requests.
 		Available for both PF and VF, and take no other effect on ZIP.
 
-What:		/sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/send_busy_cnt
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the total number of requests received
+What:           /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/send_busy_cnt
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the total number of requests received
 		with returning busy.
 		Available for both PF and VF, and take no other effect on ZIP.
 
-What:		/sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/err_bd_cnt
-Date:		Apr 2020
-Contact:	linux-crypto@vger.kernel.org
-Description:	Dump the total number of BD type error requests
+What:           /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/err_bd_cnt
+Date:           Apr 2020
+Contact:        linux-crypto@vger.kernel.org
+Description:    Dump the total number of BD type error requests
 		to be received.
 		Available for both PF and VF, and take no other effect on ZIP.

Documentation/ABI/testing/ima_policy

@@ -27,9 +27,8 @@ Description:
 				[fowner=] [fgroup=]]
 			lsm:	[[subj_user=] [subj_role=] [subj_type=]
 				 [obj_user=] [obj_role=] [obj_type=]]
-			option:	[digest_type=] [template=] [permit_directio]
-				[appraise_type=] [appraise_flag=]
-				[appraise_algos=] [keyrings=]
+			option:	[[appraise_type=]] [template=] [permit_directio]
+				[appraise_flag=] [appraise_algos=] [keyrings=]
 		  base:
 			func:= [BPRM_CHECK][MMAP_CHECK][CREDS_CHECK][FILE_CHECK][MODULE_CHECK]
 				[FIRMWARE_CHECK]
@@ -48,21 +47,10 @@ Description:
 			fgroup:= decimal value
 		  lsm:  are LSM specific
 		  option:
-			appraise_type:= [imasig] | [imasig|modsig] | [sigv3]
-			    where 'imasig' is the original or the signature
-				format v2.
-			    where 'modsig' is an appended signature,
-			    where 'sigv3' is the signature format v3. (Currently
-				limited to fsverity digest based signatures
-				stored in security.ima xattr. Requires
-				specifying "digest_type=verity" first.)
-
+			appraise_type:= [imasig] [imasig|modsig]
 			appraise_flag:= [check_blacklist]
 			Currently, blacklist check is only for files signed with appended
 			signature.
-			digest_type:= verity
-			    Require fs-verity's file digest instead of the
-			    regular IMA file hash.
 			keyrings:= list of keyrings
 			(eg, .builtin_trusted_keys|.ima). Only valid
 			when action is "measure" and func is KEY_CHECK.
@@ -161,30 +149,3 @@ Description:
 		security.ima xattr of a file:
 
 			appraise func=SETXATTR_CHECK appraise_algos=sha256,sha384,sha512
-
-		Example of a 'measure' rule requiring fs-verity's digests
-		with indication of type of digest in the measurement list.
-
-			measure func=FILE_CHECK digest_type=verity \
-				template=ima-ngv2
-
-		Example of 'measure' and 'appraise' rules requiring fs-verity
-		signatures (format version 3) stored in security.ima xattr.
-
-		The 'measure' rule specifies the 'ima-sigv3' template option,
-		which includes the indication of type of digest and the file
-		signature in the measurement list.
-
-			measure func=BPRM_CHECK digest_type=verity \
-				template=ima-sigv3
-
-
-		The 'appraise' rule specifies the type and signature format
-		version (sigv3) required.
-
-			appraise func=BPRM_CHECK digest_type=verity \
-				appraise_type=sigv3
-
-		All of these policy rules could, for example, be constrained
-		either based on a filesystem's UUID (fsuuid) or based on LSM
-		labels.

Documentation/ABI/testing/procfs-smaps_rollup

@@ -22,7 +22,6 @@ Description:
 			MMUPageSize:           4 kB
 			Rss:		     884 kB
 			Pss:		     385 kB
-			Pss_Dirty:	      68 kB
 			Pss_Anon:	     301 kB
 			Pss_File:	      80 kB
 			Pss_Shmem:	       4 kB

Documentation/ABI/testing/securityfs-secrets-coco

@@ -1,51 +0,0 @@
-What:		security/secrets/coco
-Date:		February 2022
-Contact:	Dov Murik <dovmurik@linux.ibm.com>
-Description:
-		Exposes confidential computing (coco) EFI secrets to
-		userspace via securityfs.
-
-		EFI can declare memory area used by confidential computing
-		platforms (such as AMD SEV and SEV-ES) for secret injection by
-		the Guest Owner during VM's launch.  The secrets are encrypted
-		by the Guest Owner and decrypted inside the trusted enclave,
-		and therefore are not readable by the untrusted host.
-
-		The efi_secret module exposes the secrets to userspace.  Each
-		secret appears as a file under <securityfs>/secrets/coco,
-		where the filename is the GUID of the entry in the secrets
-		table.  This module is loaded automatically by the EFI driver
-		if the EFI secret area is populated.
-
-		Two operations are supported for the files: read and unlink.
-		Reading the file returns the content of secret entry.
-		Unlinking the file overwrites the secret data with zeroes and
-		removes the entry from the filesystem.  A secret cannot be read
-		after it has been unlinked.
-
-		For example, listing the available secrets::
-
-		  # modprobe efi_secret
-		  # ls -l /sys/kernel/security/secrets/coco
-		  -r--r----- 1 root root 0 Jun 28 11:54 736870e5-84f0-4973-92ec-06879ce3da0b
-		  -r--r----- 1 root root 0 Jun 28 11:54 83c83f7f-1356-4975-8b7e-d3a0b54312c6
-		  -r--r----- 1 root root 0 Jun 28 11:54 9553f55d-3da2-43ee-ab5d-ff17f78864d2
-		  -r--r----- 1 root root 0 Jun 28 11:54 e6f5a162-d67f-4750-a67c-5d065f2a9910
-
-		Reading the secret data by reading a file::
-
-		  # cat /sys/kernel/security/secrets/coco/e6f5a162-d67f-4750-a67c-5d065f2a9910
-		  the-content-of-the-secret-data
-
-		Wiping a secret by unlinking a file::
-
-		  # rm /sys/kernel/security/secrets/coco/e6f5a162-d67f-4750-a67c-5d065f2a9910
-		  # ls -l /sys/kernel/security/secrets/coco
-		  -r--r----- 1 root root 0 Jun 28 11:54 736870e5-84f0-4973-92ec-06879ce3da0b
-		  -r--r----- 1 root root 0 Jun 28 11:54 83c83f7f-1356-4975-8b7e-d3a0b54312c6
-		  -r--r----- 1 root root 0 Jun 28 11:54 9553f55d-3da2-43ee-ab5d-ff17f78864d2
-
-		Note: The binary format of the secrets table injected by the
-		Guest Owner is described in
-		drivers/virt/coco/efi_secret/efi_secret.c under "Structure of
-		the EFI secret area".

Documentation/ABI/testing/sysfs-amd-pmc

@@ -1,13 +0,0 @@
-What:		/sys/bus/platform/drivers/amd_pmc/*/smu_fw_version
-Date:		October 2022
-Contact:	Mario Limonciello <mario.limonciello@amd.com>
-Description:	Reading this file reports the version of the firmware loaded to
-		System Management Unit (SMU) contained in AMD CPUs and
-		APUs.
-
-What:		/sys/bus/platform/drivers/amd_pmc/*/smu_program
-Date:		October 2022
-Contact:	Mario Limonciello <mario.limonciello@amd.com>
-Description:	Reading this file reports the program corresponding to the SMU
-		firmware version.  The program field is used to disambiguate two
-		APU/CPU models that can share the same firmware binary.

Documentation/ABI/testing/sysfs-amd-pmf

@@ -1,13 +0,0 @@
-What:		/sys/devices/platform/*/cnqf_enable
-Date:		September 2022
-Contact:	Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
-Description:	Reading this file tells if the AMD Platform Management(PMF)
-		Cool n Quiet Framework(CnQF) feature is enabled or not.
-
-		This feature is not enabled by default and gets only turned on
-		if OEM BIOS passes a "flag" to PMF ACPI function (index 11 or 12)
-		or in case the user writes "on".
-
-		To turn off CnQF user can write "off" to the sysfs node.
-		Note: Systems that support auto mode will not have this sysfs file
-		available.

Documentation/ABI/testing/sysfs-ata

@@ -107,14 +107,13 @@ Description:
 				described in ATA8 7.16 and 7.17. Only valid if
 				the device is not a PM.
 
-		pio_mode:	(RO) PIO transfer mode used by the device.
-				Mostly used by PATA devices.
+		pio_mode:	(RO) Transfer modes supported by the device when
+				in PIO mode. Mostly used by PATA device.
 
-		xfer_mode:	(RO) Current transfer mode. Mostly used by
-				PATA devices.
+		xfer_mode:	(RO) Current transfer mode
 
-		dma_mode:	(RO) DMA transfer mode used by the device.
-				Mostly used by PATA devices.
+		dma_mode:	(RO) Transfer modes supported by the device when
+				in DMA mode. Mostly used by PATA device.
 
 		class:		(RO) Device class. Can be "ata" for disk,
 				"atapi" for packet device, "pmp" for PM, or

Documentation/ABI/testing/sysfs-bus-bcma

@@ -3,7 +3,7 @@ Date:		May 2011
 KernelVersion:	3.0
 Contact:	Rafał Miłecki <zajec5@gmail.com>
 Description:
-		Each BCMA core has its manufacturer id. See
+		Each BCMA core has it's manufacturer id. See
 		include/linux/bcma/bcma.h for possible values.
 
 What:		/sys/bus/bcma/devices/.../id

Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x

@@ -516,11 +516,3 @@ Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(Read) Returns the number of special conditional P1 right-hand keys
 		that the trace unit can use (0x194).  The value is taken
 		directly from the HW.
-
-What:		/sys/bus/coresight/devices/etm<N>/ts_source
-Date:		October 2022
-KernelVersion:	6.1
-Contact:	Mathieu Poirier <mathieu.poirier@linaro.org> or Suzuki K Poulose <suzuki.poulose@arm.com>
-Description:	(Read) When FEAT_TRF is implemented, value of TRFCR_ELx.TS used for
-		trace session. Otherwise -1 indicates an unknown time source. Check
-		trcidr0.tssize to see if a global timestamp is available.

Documentation/ABI/testing/sysfs-bus-counter

@@ -4,12 +4,6 @@ Contact:	linux-iio@vger.kernel.org
 Description:
 		Count data of Count Y represented as a string.
 
-What:		/sys/bus/counter/devices/counterX/countY/capture
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Historical capture of the Count Y count data.
-
 What:		/sys/bus/counter/devices/counterX/countY/ceiling
 KernelVersion:	5.2
 Contact:	linux-iio@vger.kernel.org
@@ -209,13 +203,6 @@ Description:
 		both edges:
 			Any state transition.
 
-What:		/sys/bus/counter/devices/counterX/countY/num_overflows
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		This attribute indicates the number of overflows of count Y.
-
-What:		/sys/bus/counter/devices/counterX/countY/capture_component_id
 What:		/sys/bus/counter/devices/counterX/countY/ceiling_component_id
 What:		/sys/bus/counter/devices/counterX/countY/floor_component_id
 What:		/sys/bus/counter/devices/counterX/countY/count_mode_component_id
@@ -226,14 +213,11 @@ What:		/sys/bus/counter/devices/counterX/countY/prescaler_component_id
 What:		/sys/bus/counter/devices/counterX/countY/preset_component_id
 What:		/sys/bus/counter/devices/counterX/countY/preset_enable_component_id
 What:		/sys/bus/counter/devices/counterX/countY/signalZ_action_component_id
-What:		/sys/bus/counter/devices/counterX/countY/num_overflows_component_id
 What:		/sys/bus/counter/devices/counterX/signalY/cable_fault_component_id
 What:		/sys/bus/counter/devices/counterX/signalY/cable_fault_enable_component_id
 What:		/sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler_component_id
 What:		/sys/bus/counter/devices/counterX/signalY/index_polarity_component_id
-What:		/sys/bus/counter/devices/counterX/signalY/polarity_component_id
 What:		/sys/bus/counter/devices/counterX/signalY/synchronous_mode_component_id
-What:		/sys/bus/counter/devices/counterX/signalY/frequency_component_id
 KernelVersion:	5.16
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -319,19 +303,6 @@ Description:
 		Discrete set of available values for the respective Signal Y
 		configuration are listed in this file.
 
-What:		/sys/bus/counter/devices/counterX/signalY/polarity
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Active level of Signal Y. The following polarity values are
-		available:
-
-		positive:
-			Signal high state considered active level (rising edge).
-
-		negative:
-			Signal low state considered active level (falling edge).
-
 What:		/sys/bus/counter/devices/counterX/signalY/name
 KernelVersion:	5.2
 Contact:	linux-iio@vger.kernel.org
@@ -374,9 +345,3 @@ Description:
 			via index_polarity. The index function (as enabled via
 			preset_enable) is performed synchronously with the
 			quadrature clock on the active level of the index input.
-
-What:		/sys/bus/counter/devices/counterX/signalY/frequency
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Read-only attribute that indicates the signal Y frequency, in Hz.

Documentation/ABI/testing/sysfs-bus-cxl

@@ -1,13 +1,3 @@
-What:		/sys/bus/cxl/flush
-Date:		Januarry, 2022
-KernelVersion:	v5.18
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(WO) If userspace manually unbinds a port the kernel schedules
-		all descendant memdevs for unbind. Writing '1' to this attribute
-		flushes that work.
-
-
 What:		/sys/bus/cxl/devices/memX/firmware_version
 Date:		December, 2020
 KernelVersion:	v5.12
@@ -17,7 +7,6 @@ Description:
 		Memory Device Output Payload in the CXL-2.0
 		specification.
 
-
 What:		/sys/bus/cxl/devices/memX/ram/size
 Date:		December, 2020
 KernelVersion:	v5.12
@@ -27,7 +16,6 @@ Description:
 		identically named field in the Identify Memory Device Output
 		Payload in the CXL-2.0 specification.
 
-
 What:		/sys/bus/cxl/devices/memX/pmem/size
 Date:		December, 2020
 KernelVersion:	v5.12
@@ -37,354 +25,105 @@ Description:
 		identically named field in the Identify Memory Device Output
 		Payload in the CXL-2.0 specification.
 
-
-What:		/sys/bus/cxl/devices/memX/serial
-Date:		January, 2022
-KernelVersion:	v5.18
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RO) 64-bit serial number per the PCIe Device Serial Number
-		capability. Mandatory for CXL devices, see CXL 2.0 8.1.12.2
-		Memory Device PCIe Capabilities and Extended Capabilities.
-
-
-What:		/sys/bus/cxl/devices/memX/numa_node
-Date:		January, 2022
-KernelVersion:	v5.18
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RO) If NUMA is enabled and the platform has affinitized the
-		host PCI device for this memory device, emit the CPU node
-		affinity for this device.
-
-
 What:		/sys/bus/cxl/devices/*/devtype
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		(RO) CXL device objects export the devtype attribute which
-		mirrors the same value communicated in the DEVTYPE environment
-		variable for uevents for devices on the "cxl" bus.
-
-
-What:		/sys/bus/cxl/devices/*/modalias
-Date:		December, 2021
-KernelVersion:	v5.18
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RO) CXL device objects export the modalias attribute which
-		mirrors the same value communicated in the MODALIAS environment
-		variable for uevents for devices on the "cxl" bus.
-
+		CXL device objects export the devtype attribute which mirrors
+		the same value communicated in the DEVTYPE environment variable
+		for uevents for devices on the "cxl" bus.
 
 What:		/sys/bus/cxl/devices/portX/uport
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		(RO) CXL port objects are enumerated from either a platform
-		firmware device (ACPI0017 and ACPI0016) or PCIe switch upstream
-		port with CXL component registers. The 'uport' symlink connects
-		the CXL portX object to the device that published the CXL port
+		CXL port objects are enumerated from either a platform firmware
+		device (ACPI0017 and ACPI0016) or PCIe switch upstream port with
+		CXL component registers. The 'uport' symlink connects the CXL
+		portX object to the device that published the CXL port
 		capability.
 
-
 What:		/sys/bus/cxl/devices/portX/dportY
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		(RO) CXL port objects are enumerated from either a platform
-		firmware device (ACPI0017 and ACPI0016) or PCIe switch upstream
-		port with CXL component registers. The 'dportY' symlink
-		identifies one or more downstream ports that the upstream port
-		may target in its decode of CXL memory resources.  The 'Y'
-		integer reflects the hardware port unique-id used in the
-		hardware decoder target list.
-
+		CXL port objects are enumerated from either a platform firmware
+		device (ACPI0017 and ACPI0016) or PCIe switch upstream port with
+		CXL component registers. The 'dportY' symlink identifies one or
+		more downstream ports that the upstream port may target in its
+		decode of CXL memory resources.  The 'Y' integer reflects the
+		hardware port unique-id used in the hardware decoder target
+		list.
 
 What:		/sys/bus/cxl/devices/decoderX.Y
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		(RO) CXL decoder objects are enumerated from either a platform
+		CXL decoder objects are enumerated from either a platform
 		firmware description, or a CXL HDM decoder register set in a
 		PCIe device (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder
 		Capability Structure). The 'X' in decoderX.Y represents the
 		cxl_port container of this decoder, and 'Y' represents the
 		instance id of a given decoder resource.
 
-
 What:		/sys/bus/cxl/devices/decoderX.Y/{start,size}
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		(RO) The 'start' and 'size' attributes together convey the
-		physical address base and number of bytes mapped in the
-		decoder's decode window. For decoders of devtype
-		"cxl_decoder_root" the address range is fixed. For decoders of
-		devtype "cxl_decoder_switch" the address is bounded by the
-		decode range of the cxl_port ancestor of the decoder's cxl_port,
-		and dynamically updates based on the active memory regions in
-		that address space.
-
+		The 'start' and 'size' attributes together convey the physical
+		address base and number of bytes mapped in the decoder's decode
+		window. For decoders of devtype "cxl_decoder_root" the address
+		range is fixed. For decoders of devtype "cxl_decoder_switch" the
+		address is bounded by the decode range of the cxl_port ancestor
+		of the decoder's cxl_port, and dynamically updates based on the
+		active memory regions in that address space.
 
 What:		/sys/bus/cxl/devices/decoderX.Y/locked
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		(RO) CXL HDM decoders have the capability to lock the
-		configuration until the next device reset. For decoders of
-		devtype "cxl_decoder_root" there is no standard facility to
-		unlock them.  For decoders of devtype "cxl_decoder_switch" a
-		secondary bus reset, of the PCIe bridge that provides the bus
-		for this decoders uport, unlocks / resets the decoder.
-
+		CXL HDM decoders have the capability to lock the configuration
+		until the next device reset. For decoders of devtype
+		"cxl_decoder_root" there is no standard facility to unlock them.
+		For decoders of devtype "cxl_decoder_switch" a secondary bus
+		reset, of the PCIe bridge that provides the bus for this
+		decoders uport, unlocks / resets the decoder.
 
 What:		/sys/bus/cxl/devices/decoderX.Y/target_list
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		(RO) Display a comma separated list of the current decoder
-		target configuration. The list is ordered by the current
-		configured interleave order of the decoder's dport instances.
-		Each entry in the list is a dport id.
-
+		Display a comma separated list of the current decoder target
+		configuration. The list is ordered by the current configured
+		interleave order of the decoder's dport instances. Each entry in
+		the list is a dport id.
 
 What:		/sys/bus/cxl/devices/decoderX.Y/cap_{pmem,ram,type2,type3}
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		(RO) When a CXL decoder is of devtype "cxl_decoder_root", it
+		When a CXL decoder is of devtype "cxl_decoder_root", it
 		represents a fixed memory window identified by platform
 		firmware. A fixed window may only support a subset of memory
 		types. The 'cap_*' attributes indicate whether persistent
 		memory, volatile memory, accelerator memory, and / or expander
 		memory may be mapped behind this decoder's memory window.
 
-
 What:		/sys/bus/cxl/devices/decoderX.Y/target_type
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		(RO) When a CXL decoder is of devtype "cxl_decoder_switch", it
-		can optionally decode either accelerator memory (type-2) or
-		expander memory (type-3). The 'target_type' attribute indicates
-		the current setting which may dynamically change based on what
+		When a CXL decoder is of devtype "cxl_decoder_switch", it can
+		optionally decode either accelerator memory (type-2) or expander
+		memory (type-3). The 'target_type' attribute indicates the
+		current setting which may dynamically change based on what
 		memory regions are activated in this decode hierarchy.
-
-
-What:		/sys/bus/cxl/devices/endpointX/CDAT
-Date:		July, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RO) If this sysfs entry is not present no DOE mailbox was
-		found to support CDAT data.  If it is present and the length of
-		the data is 0 reading the CDAT data failed.  Otherwise the CDAT
-		data is reported.
-
-
-What:		/sys/bus/cxl/devices/decoderX.Y/mode
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RW) When a CXL decoder is of devtype "cxl_decoder_endpoint" it
-		translates from a host physical address range, to a device local
-		address range. Device-local address ranges are further split
-		into a 'ram' (volatile memory) range and 'pmem' (persistent
-		memory) range. The 'mode' attribute emits one of 'ram', 'pmem',
-		'mixed', or 'none'. The 'mixed' indication is for error cases
-		when a decoder straddles the volatile/persistent partition
-		boundary, and 'none' indicates the decoder is not actively
-		decoding, or no DPA allocation policy has been set.
-
-		'mode' can be written, when the decoder is in the 'disabled'
-		state, with either 'ram' or 'pmem' to set the boundaries for the
-		next allocation.
-
-
-What:		/sys/bus/cxl/devices/decoderX.Y/dpa_resource
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RO) When a CXL decoder is of devtype "cxl_decoder_endpoint",
-		and its 'dpa_size' attribute is non-zero, this attribute
-		indicates the device physical address (DPA) base address of the
-		allocation.
-
-
-What:		/sys/bus/cxl/devices/decoderX.Y/dpa_size
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RW) When a CXL decoder is of devtype "cxl_decoder_endpoint" it
-		translates from a host physical address range, to a device local
-		address range. The range, base address plus length in bytes, of
-		DPA allocated to this decoder is conveyed in these 2 attributes.
-		Allocations can be mutated as long as the decoder is in the
-		disabled state. A write to 'dpa_size' releases the previous DPA
-		allocation and then attempts to allocate from the free capacity
-		in the device partition referred to by 'decoderX.Y/mode'.
-		Allocate and free requests can only be performed on the highest
-		instance number disabled decoder with non-zero size. I.e.
-		allocations are enforced to occur in increasing 'decoderX.Y/id'
-		order and frees are enforced to occur in decreasing
-		'decoderX.Y/id' order.
-
-
-What:		/sys/bus/cxl/devices/decoderX.Y/interleave_ways
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RO) The number of targets across which this decoder's host
-		physical address (HPA) memory range is interleaved. The device
-		maps every Nth block of HPA (of size ==
-		'interleave_granularity') to consecutive DPA addresses. The
-		decoder's position in the interleave is determined by the
-		device's (endpoint or switch) switch ancestry. For root
-		decoders their interleave is specified by platform firmware and
-		they only specify a downstream target order for host bridges.
-
-
-What:		/sys/bus/cxl/devices/decoderX.Y/interleave_granularity
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RO) The number of consecutive bytes of host physical address
-		space this decoder claims at address N before the decode rotates
-		to the next target in the interleave at address N +
-		interleave_granularity (assuming N is aligned to
-		interleave_granularity).
-
-
-What:		/sys/bus/cxl/devices/decoderX.Y/create_pmem_region
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RW) Write a string in the form 'regionZ' to start the process
-		of defining a new persistent memory region (interleave-set)
-		within the decode range bounded by root decoder 'decoderX.Y'.
-		The value written must match the current value returned from
-		reading this attribute. An atomic compare exchange operation is
-		done on write to assign the requested id to a region and
-		allocate the region-id for the next creation attempt. EBUSY is
-		returned if the region name written does not match the current
-		cached value.
-
-
-What:		/sys/bus/cxl/devices/decoderX.Y/delete_region
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(WO) Write a string in the form 'regionZ' to delete that region,
-		provided it is currently idle / not bound to a driver.
-
-
-What:		/sys/bus/cxl/devices/regionZ/uuid
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RW) Write a unique identifier for the region. This field must
-		be set for persistent regions and it must not conflict with the
-		UUID of another region.
-
-
-What:		/sys/bus/cxl/devices/regionZ/interleave_granularity
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RW) Set the number of consecutive bytes each device in the
-		interleave set will claim. The possible interleave granularity
-		values are determined by the CXL spec and the participating
-		devices.
-
-
-What:		/sys/bus/cxl/devices/regionZ/interleave_ways
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RW) Configures the number of devices participating in the
-		region is set by writing this value. Each device will provide
-		1/interleave_ways of storage for the region.
-
-
-What:		/sys/bus/cxl/devices/regionZ/size
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RW) System physical address space to be consumed by the region.
-		When written trigger the driver to allocate space out of the
-		parent root decoder's address space. When read the size of the
-		address space is reported and should match the span of the
-		region's resource attribute. Size shall be set after the
-		interleave configuration parameters. Once set it cannot be
-		changed, only freed by writing 0. The kernel makes no guarantees
-		that data is maintained over an address space freeing event, and
-		there is no guarantee that a free followed by an allocate
-		results in the same address being allocated.
-
-
-What:		/sys/bus/cxl/devices/regionZ/resource
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RO) A region is a contiguous partition of a CXL root decoder
-		address space. Region capacity is allocated by writing to the
-		size attribute, the resulting physical address space determined
-		by the driver is reflected here. It is therefore not useful to
-		read this before writing a value to the size attribute.
-
-
-What:		/sys/bus/cxl/devices/regionZ/target[0..N]
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RW) Write an endpoint decoder object name to 'targetX' where X
-		is the intended position of the endpoint device in the region
-		interleave and N is the 'interleave_ways' setting for the
-		region. ENXIO is returned if the write results in an impossible
-		to map decode scenario, like the endpoint is unreachable at that
-		position relative to the root decoder interleave. EBUSY is
-		returned if the position in the region is already occupied, or
-		if the region is not in a state to accept interleave
-		configuration changes. EINVAL is returned if the object name is
-		not an endpoint decoder. Once all positions have been
-		successfully written a final validation for decode conflicts is
-		performed before activating the region.
-
-
-What:		/sys/bus/cxl/devices/regionZ/commit
-Date:		May, 2022
-KernelVersion:	v5.20
-Contact:	linux-cxl@vger.kernel.org
-Description:
-		(RW) Write a boolean 'true' string value to this attribute to
-		trigger the region to transition from the software programmed
-		state to the actively decoding in hardware state. The commit
-		operation in addition to validating that the region is in proper
-		configured state, validates that the decoders are being
-		committed in spec mandated order (last committed decoder id +
-		1), and checks that the hardware accepts the commit request.
-		Reading this value indicates whether the region is committed or
-		not.

Documentation/ABI/testing/sysfs-bus-event_source-devices-caps

@@ -1,18 +0,0 @@
-What:		/sys/bus/event_source/devices/<dev>/caps
-Date:		May 2022
-KernelVersion:	5.19
-Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
-Description:
-		Attribute group to describe the capabilities exposed
-		for a particular pmu. Each attribute of this group can
-		expose information specific to a PMU, say pmu_name, so that
-		userspace can understand some of the feature which the
-		platform specific PMU supports.
-
-		One of the example available capability in supported platform
-		like Intel is pmu_name, which exposes underlying CPU name known
-		to the PMU driver.
-
-		Example output in powerpc:
-		grep . /sys/bus/event_source/devices/cpu/caps/*
-		/sys/bus/event_source/devices/cpu/caps/pmu_name:POWER9

Documentation/ABI/testing/sysfs-bus-fcoe

@@ -31,7 +31,7 @@ Description:	'FCoE Controller' instances on the fcoe bus.
 		1) Write interface name to ctlr_create 2) Configure the FCoE
 		Controller (ctlr_X) 3) Enable the FCoE Controller to begin
 		discovery and login. The FCoE Controller is destroyed by
-		writing its name, i.e. ctlr_X to the ctlr_delete file.
+		writing it's name, i.e. ctlr_X to the ctlr_delete file.
 
 Attributes:
 

Documentation/ABI/testing/sysfs-bus-iio

@@ -79,11 +79,6 @@ Description:
 		* "accel-base"
 		* "accel-display"
 
-		For devices where an accelerometer is housed in the swivel camera subassembly
-		(for AR application), the following standardized label is used:
-
-		* "accel-camera"
-
 What:		/sys/bus/iio/devices/iio:deviceX/current_timestamp_clock
 KernelVersion:	4.5
 Contact:	linux-iio@vger.kernel.org
@@ -107,9 +102,6 @@ Description:
 		relevant directories.  If it affects all of the above
 		then it is to be found in the base device directory.
 
-		The stm32-timer-trigger has the additional characteristic that
-		a sampling_frequency of 0 is defined to stop sampling.
-
 What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available
@@ -196,7 +188,7 @@ Description:
 		Raw capacitance measurement from channel Y. Units after
 		application of scale and offset are nanofarads.
 
-What:		/sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw
+What:		/sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw
 KernelVersion:	3.2
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -207,25 +199,6 @@ Description:
 		is required is a consistent labeling.  Units after application
 		of scale and offset are nanofarads.
 
-What:		/sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_zeropoint
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		For differential channels, this an offset that is applied
-		equally to both inputs. As the reading is of the difference
-		between the two inputs, this should not be applied to the _raw
-		reading by userspace (unlike _offset) and unlike calibbias
-		it does not affect the differential value measured because
-		the effect of _zeropoint cancels out across the two inputs
-		that make up the differential pair. It's purpose is to bring
-		the individual signals, before the differential is measured,
-		within the measurement range of the device. The naming is
-		chosen because if the separate inputs that make the
-		differential pair are drawn on a graph in their
-		_raw  units, this is the value that the zero point on the
-		measurement axis represents. It is expressed with the
-		same scaling as _raw.
-
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_x_raw
@@ -260,15 +233,6 @@ Description:
 		Has all of the equivalent parameters as per voltageY. Units
 		after application of scale and offset are m/s^2.
 
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_linear_x_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_linear_y_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_linear_z_raw
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		As per in_accel_X_raw attributes, but minus the
-		acceleration due to gravity.
-
 What:		/sys/bus/iio/devices/iio:deviceX/in_gravity_x_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_gravity_y_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_gravity_z_raw
@@ -512,7 +476,6 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale
@@ -1250,32 +1213,6 @@ Description:
 		number or direction is not specified, applies to all channels of
 		this type.
 
-What:		/sys/.../iio:deviceX/events/in_accel_mag_referenced_en
-What:		/sys/.../iio:deviceX/events/in_accel_mag_referenced_rising_en
-What:		/sys/.../iio:deviceX/events/in_accel_mag_referenced_falling_en
-What:		/sys/.../iio:deviceX/events/in_accel_y_mag_referenced_en
-What:		/sys/.../iio:deviceX/events/in_accel_y_mag_referenced_rising_en
-What:		/sys/.../iio:deviceX/events/in_accel_y_mag_referenced_falling_en
-KernelVersion:	5.18
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Similar to in_accel_mag[_y][_rising|_falling]_en, but the event
-		value is relative to a reference magnitude. The reference magnitude
-		includes the graviational acceleration.
-
-What:		/sys/.../iio:deviceX/events/in_accel_mag_referenced_value
-What:		/sys/.../iio:deviceX/events/in_accel_mag_referenced_rising_value
-What:		/sys/.../iio:deviceX/events/in_accel_mag_referenced_falling_value
-What:		/sys/.../iio:deviceX/events/in_accel_y_mag_referenced_value
-What:		/sys/.../iio:deviceX/events/in_accel_y_mag_referenced_rising_value
-What:		/sys/.../iio:deviceX/events/in_accel_y_mag_referenced_falling_value
-KernelVersion:	5.18
-Contact:	linux-iio@vger.kernel.org
-Description:
-		The value to which the reference magnitude of the channel is
-		compared. If the axis is not specified, it applies to all channels
-		of this type.
-
 What:		/sys/.../events/in_steps_change_en
 KernelVersion:	4.0
 Contact:	linux-iio@vger.kernel.org
@@ -1315,10 +1252,6 @@ Description:
 		Actually start the buffer capture up.  Will start trigger
 		if first device and appropriate.
 
-		Note that it might be impossible to configure other attributes,
-		(e.g.: events, scale, sampling rate) if they impact the currently
-		active buffer capture session.
-
 What:		/sys/bus/iio/devices/iio:deviceX/bufferY
 KernelVersion:	5.11
 Contact:	linux-iio@vger.kernel.org
@@ -2066,99 +1999,3 @@ Description:
 		Available range for the forced calibration value, expressed as:
 
 		- a range specified as "[min step max]"
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltageX_sampling_frequency
-What:		/sys/bus/iio/devices/iio:deviceX/in_powerY_sampling_frequency
-What:		/sys/bus/iio/devices/iio:deviceX/in_currentZ_sampling_frequency
-KernelVersion:	5.20
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Some devices have separate controls of sampling frequency for
-		individual channels. If multiple channels are enabled in a scan,
-		then the sampling_frequency of the scan may be computed from the
-		per channel sampling frequencies.
-
-What:		/sys/.../events/in_accel_gesture_singletap_en
-What:		/sys/.../events/in_accel_gesture_doubletap_en
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Device generates an event on a single or double tap.
-
-What:		/sys/.../events/in_accel_gesture_singletap_value
-What:		/sys/.../events/in_accel_gesture_doubletap_value
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Specifies the threshold value that the device is comparing
-		against to generate the tap gesture event. The lower
-		threshold value increases the sensitivity of tap detection.
-		Units and the exact meaning of value are device-specific.
-
-What:		/sys/.../events/in_accel_gesture_tap_value_available
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Lists all available threshold values which can be used to
-		modify the sensitivity of the tap detection.
-
-What:		/sys/.../events/in_accel_gesture_singletap_reset_timeout
-What:		/sys/.../events/in_accel_gesture_doubletap_reset_timeout
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Specifies the timeout value in seconds for the tap detector
-		to not to look for another tap event after the event as
-		occurred. Basically the minimum quiet time between the two
-		single-tap's or two double-tap's.
-
-What:		/sys/.../events/in_accel_gesture_tap_reset_timeout_available
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Lists all available tap reset timeout values. Units in seconds.
-
-What:		/sys/.../events/in_accel_gesture_doubletap_tap2_min_delay
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Specifies the minimum quiet time in seconds between the two
-		taps of a double tap.
-
-What:		/sys/.../events/in_accel_gesture_doubletap_tap2_min_delay_available
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Lists all available delay values between two taps in the double
-		tap. Units in seconds.
-
-What:		/sys/.../events/in_accel_gesture_tap_maxtomin_time
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Specifies the maximum time difference allowed between upper
-		and lower peak of tap to consider it as the valid tap event.
-		Units in seconds.
-
-What:		/sys/.../events/in_accel_gesture_tap_maxtomin_time_available
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Lists all available time values between upper peak to lower
-		peak. Units in seconds.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_rot_yaw_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_rot_pitch_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_rot_roll_raw
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Raw (unscaled) euler angles readings. Units after
-		application of scale are deg.
-
-What:		/sys/bus/iio/devices/iio:deviceX/serialnumber
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		An example format is 16-bytes, 2-digits-per-byte, HEX-string
-		representing the sensor unique ID number.

Documentation/ABI/testing/sysfs-bus-iio-adc-ad7280a

@@ -1,13 +0,0 @@
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_balance_switch_en
-KernelVersion:	5.14
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Used to enable an output for balancing cells for time
-		controlled via in_voltage_Y-voltageZ_balance_switch_timer.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_balance_switch_timer
-KernelVersion:	5.14
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Time in seconds for which balance switch will be turned on.
-		Multiple of 71.5 seconds.

Documentation/ABI/testing/sysfs-bus-iio-bno055

@@ -1,81 +0,0 @@
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_raw_range
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Raw (unscaled) range for acceleration readings. Unit after
-		application of scale is m/s^2. Note that this doesn't affects
-		the scale (which should be used when changing the maximum and
-		minimum readable value affects also the reading scaling factor).
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_raw_range
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Range for angular velocity readings in radians per second. Note
-		that this does not affects the scale (which should be used when
-		changing the maximum and minimum readable value affects also the
-		reading scaling factor).
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_raw_range_available
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		List of allowed values for in_accel_raw_range attribute
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_raw_range_available
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		List of allowed values for in_anglvel_raw_range attribute
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_magn_calibration_fast_enable
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Can be 1 or 0. Enables/disables the "Fast Magnetometer
-		Calibration" HW function.
-
-What:		/sys/bus/iio/devices/iio:deviceX/fusion_enable
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Can be 1 or 0. Enables/disables the "sensor fusion" (a.k.a.
-		NDOF) HW function.
-
-What:		/sys/bus/iio/devices/iio:deviceX/calibration_data
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Reports the binary calibration data blob for the IMU sensors.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_calibration_auto_status
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Reports the autocalibration status for the accelerometer sensor.
-		Can be 0 (calibration non even enabled) or 1 to 5 where the greater
-		the number, the better the calibration status.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_gyro_calibration_auto_status
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Reports the autocalibration status for the gyroscope sensor.
-		Can be 0 (calibration non even enabled) or 1 to 5 where the greater
-		the number, the better the calibration status.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_magn_calibration_auto_status
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Reports the autocalibration status for the magnetometer sensor.
-		Can be 0 (calibration non even enabled) or 1 to 5 where the greater
-		the number, the better the calibration status.
-
-What:		/sys/bus/iio/devices/iio:deviceX/sys_calibration_auto_status
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Reports the status for the IMU overall autocalibration.
-		Can be 0 (calibration non even enabled) or 1 to 5 where the greater
-		the number, the better the calibration status.

Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746

@@ -1,11 +0,0 @@
-What:		/sys/.../iio:deviceX/in_capacitableY_calibbias_calibration
-What:		/sys/.../iio:deviceX/in_capacitableY_calibscale_calibration
-KernelVersion:	6.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Write 1 to trigger a calibration of the calibbias or
-		calibscale. For calibscale, a full scale capacitance should
-		be connected to the capacitance input and a
-		calibscale_calibration then started.  For calibbias see
-		the device datasheet section on "capacitive system offset
-		calibration".

Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688

@@ -1,86 +0,0 @@
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_en
-KernelVersion:	5.18
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Dither enable. Write 1 to enable dither or 0 to disable it. This is useful
-		for changing the dither parameters. They way it should be done is:
-
-		- disable dither operation;
-		- change dither parameters (eg: frequency, phase...);
-		- enabled dither operation
-
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_raw
-KernelVersion:	5.18
-Contact:	linux-iio@vger.kernel.org
-Description:
-		This raw, unscaled value refers to the dither signal amplitude.
-		The same scale as in out_voltageY_raw applies. However, the
-		offset might be different as it's always 0 for this attribute.
-
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_raw_available
-KernelVersion:	5.18
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Available range for dither raw amplitude values.
-
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_offset
-KernelVersion:	5.18
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Offset applied to out_voltageY_dither_raw. Read only attribute
-		always set to 0.
-
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_frequency
-KernelVersion:	5.18
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Sets the dither signal frequency. Units are in Hz.
-
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_frequency_available
-KernelVersion:	5.18
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Returns the available values for the dither frequency.
-
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_phase
-KernelVersion:	5.18
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Sets the dither signal phase. Units are in Radians.
-
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_phase_available
-KernelVersion:	5.18
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Returns the available values for the dither phase.
-
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_toggle_en
-KernelVersion:	5.18
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Toggle enable. Write 1 to enable toggle or 0 to disable it. This is
-		useful when one wants to change the DAC output codes. The way it should
-		be done is:
-
-		- disable toggle operation;
-		- change out_voltageY_raw0 and out_voltageY_raw1;
-		- enable toggle operation.
-
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_raw0
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_raw1
-KernelVersion:	5.18
-Contact:	linux-iio@vger.kernel.org
-Description:
-		It has the same meaning as out_voltageY_raw. This attribute is
-		specific to toggle enabled channels and refers to the DAC output
-		code in INPUT_A (_raw0) and INPUT_B (_raw1). The same scale and offset
-		as in out_voltageY_raw applies.
-
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_symbol
-KernelVersion:	5.18
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Performs a SW toggle. This attribute is specific to toggle
-		enabled channels and allows to toggle between out_voltageY_raw0
-		and out_voltageY_raw1 through software. Writing 0 will select
-		out_voltageY_raw0 while 1 selects out_voltageY_raw1.

Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818

@@ -1,16 +0,0 @@
-What:		/sys/bus/iio/devices/iio:deviceX/filter_mode_available
-KernelVersion:
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Reading this returns the valid values that can be written to the
-		on_altvoltage0_mode attribute:
-
-		- auto -> Adjust bandpass filter to track changes in input clock rate.
-		- manual -> disable/unregister the clock rate notifier / input clock tracking.
-
-What:		/sys/bus/iio/devices/iio:deviceX/filter_mode
-KernelVersion:
-Contact:	linux-iio@vger.kernel.org
-Description:
-		This attribute configures the filter mode.
-		Reading returns the actual mode.

Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1013

@@ -1,38 +0,0 @@
-What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0-1_i_calibphase
-KernelVersion:
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Read/write unscaled value for the Local Oscillatior path quadrature I phase shift.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0-1_q_calibphase
-KernelVersion:
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Read/write unscaled value for the Local Oscillatior path quadrature Q phase shift.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0_i_calibbias
-KernelVersion:
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Read/write value for the Local Oscillatior Feedthrough Offset Calibration I Positive
-		side.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0_q_calibbias
-KernelVersion:
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Read/write value for the Local Oscillatior Feedthrough Offset Calibration Q Positive side.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage1_i_calibbias
-KernelVersion:
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Read/write raw value for the Local Oscillatior Feedthrough Offset Calibration I Negative
-		side.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage1_q_calibbias
-KernelVersion:
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Read/write raw value for the Local Oscillatior Feedthrough Offset Calibration Q Negative
-		side.

Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1014

@@ -1,23 +0,0 @@
-What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0_i_calibscale_coarse
-KernelVersion: 5.18
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Read/write value for the digital attenuator gain (IF_I) with coarse steps.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0_q_calibscale_coarse
-KernelVersion: 5.18
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Read/write value for the digital attenuator gain (IF_Q) with coarse steps.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0_i_calibscale_fine
-KernelVersion: 5.18
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Read/write value for the digital attenuator gain (IF_I) with fine steps.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0_q_calibscale_fine
-KernelVersion: 5.18
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Read/write value for the digital attenuator gain (IF_Q) with fine steps.

Documentation/ABI/testing/sysfs-bus-iio-proximity

@@ -18,7 +18,7 @@ Description:
 		on the signal from which time of flight measurements are
 		taken.
 		The appropriate values to take is dependent on both the
-		sensor and its operating environment:
+		sensor and it's operating environment:
 		* as3935 (0-31 range)
 		18 = indoors (default)
 		14 = outdoors

Documentation/ABI/testing/sysfs-bus-iio-sx9324

@@ -1,29 +0,0 @@
-What:		/sys/bus/iio/devices/iio:deviceX/in_proximity<id>_setup
-Date:		November 2021
-KernelVersion:	5.17
-Contact:	Gwendal Grignou <gwendal@chromium.org>
-Description:
-		SX9324 has 3 inputs, CS0, CS1 and CS2. Hardware layout
-		defines if the input is
-
-		+ not connected (HZ),
-		+ grounded (GD),
-		+ connected to an antenna where it can act as a base
-		  (DS - data shield), or measured input (MI).
-
-		The sensor rotates measurement across 4 phases
-		(PH0, PH1, PH2, PH3), where the inputs are configured
-		and then measured.
-
-		By default,  during the first phase, [PH0], CS0 is measured,
-		while CS1 and CS2 are used as shields.
-		`cat in_proximity0_setup` returns "MI,DS,DS".
-		[PH1], CS1 is measured, CS0 and CS2 are shield:
-		`cat in_proximity1_setup` returns "DS,MI,DS".
-		[PH2], CS2 is measured, CS0 and CS1 are shield:
-		`cat in_proximity1_setup` returns "DS,DS,MI".
-		[PH3], CS1 and CS2 are measured (combo mode):
-		`cat in_proximity1_setup` returns "DS,MI,MI".
-
-		Note, these are the chip default. Hardware layout will most
-		likely dictate different output. The entry is read-only.

Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856

@@ -0,0 +1,31 @@
+What:		/sys/bus/iio/devices/iio:deviceX/fault_oc
+KernelVersion:	5.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Open-circuit fault. The detection of open-circuit faults,
+		such as those caused by broken thermocouple wires.
+		Reading returns either '1' or '0'.
+
+		===  =======================================================
+		'1'  An open circuit such as broken thermocouple wires
+		     has been detected.
+		'0'  No open circuit or broken thermocouple wires are detected
+		===  =======================================================
+
+What:		/sys/bus/iio/devices/iio:deviceX/fault_ovuv
+KernelVersion:	5.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Overvoltage or Undervoltage Input Fault. The internal circuitry
+		is protected from excessive voltages applied to the thermocouple
+		cables by integrated MOSFETs at the T+ and T- inputs, and the
+		BIAS output. These MOSFETs turn off when the input voltage is
+		negative or greater than VDD.
+
+		Reading returns either '1' or '0'.
+
+		===  =======================================================
+		'1'  The input voltage is negative or greater than VDD.
+		'0'  The input voltage is positive and less than VDD (normal
+		     state).
+		===  =======================================================

Documentation/ABI/testing/sysfs-bus-iio-temperature-max31865

@@ -0,0 +1,20 @@
+What:		/sys/bus/iio/devices/iio:deviceX/fault_ovuv
+KernelVersion:	5.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Overvoltage or Undervoltage Input fault. The internal circuitry
+		is protected from excessive voltages applied to the thermocouple
+		cables at FORCE+, FORCE2, RTDIN+ & RTDIN-. This circuitry turn
+		off when the input voltage is negative or greater than VDD.
+
+		Reading returns '1' if input voltage is negative or greater
+		than VDD, otherwise '0'.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_filter_notch_center_frequency
+KernelVersion:	5.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Notch frequency in Hz for a noise rejection filter. Used i.e for
+		line noise rejection.
+
+		Valid notch filter values are 50 Hz and 60 Hz.

Documentation/ABI/testing/sysfs-bus-iio-thermocouple

@@ -1,18 +0,0 @@
-What:		/sys/bus/iio/devices/iio:deviceX/fault_ovuv
-KernelVersion:	5.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Overvoltage or Undervoltage Input Fault. The internal circuitry
-		is protected from excessive voltages applied to the thermocouple
-		cables. The device can also detect if such a condition occurs.
-
-		Reading returns '1' if input voltage is negative or greater
-		than VDD, otherwise '0'.
-
-What:		/sys/bus/iio/devices/iio:deviceX/fault_oc
-KernelVersion:	5.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Open-circuit fault. The detection of open-circuit faults,
-		such as those caused by broken thermocouple wires.
-		Reading returns '1' if fault, '0' otherwise.

Documentation/ABI/testing/sysfs-bus-iio-timer-stm32

@@ -90,6 +90,14 @@ Description:
 		Reading returns the current master modes.
 		Writing set the master mode
 
+What:		/sys/bus/iio/devices/triggerX/sampling_frequency
+KernelVersion:	4.11
+Contact:	benjamin.gaignard@st.com
+Description:
+		Reading returns the current sampling frequency.
+		Writing an value different of 0 set and start sampling.
+		Writing 0 stop sampling.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_count0_preset
 KernelVersion:	4.12
 Contact:	benjamin.gaignard@st.com

Documentation/ABI/testing/sysfs-bus-iio-vf610

@@ -1,4 +1,4 @@
-What:		/sys/bus/iio/devices/iio:deviceX/in_conversion_mode
+What:		/sys/bus/iio/devices/iio:deviceX/conversion_mode
 KernelVersion:	4.2
 Contact:	linux-iio@vger.kernel.org
 Description:

Documentation/ABI/testing/sysfs-bus-nvdimm

@@ -6,38 +6,3 @@ Description:
 
 The libnvdimm sub-system implements a common sysfs interface for
 platform nvdimm resources. See Documentation/driver-api/nvdimm/.
-
-What:           /sys/bus/event_source/devices/nmemX/format
-Date:           February 2022
-KernelVersion:  5.18
-Contact:        Kajol Jain <kjain@linux.ibm.com>
-Description:	(RO) Attribute group to describe the magic bits
-		that go into perf_event_attr.config for a particular pmu.
-		(See ABI/testing/sysfs-bus-event_source-devices-format).
-
-		Each attribute under this group defines a bit range of the
-		perf_event_attr.config. Supported attribute is listed
-		below::
-		  event  = "config:0-4"  - event ID
-
-		For example::
-			ctl_res_cnt = "event=0x1"
-
-What:           /sys/bus/event_source/devices/nmemX/events
-Date:           February 2022
-KernelVersion:  5.18
-Contact:        Kajol Jain <kjain@linux.ibm.com>
-Description:	(RO) Attribute group to describe performance monitoring events
-                for the nvdimm memory device. Each attribute in this group
-                describes a single performance monitoring event supported by
-                this nvdimm pmu.  The name of the file is the name of the event.
-                (See ABI/testing/sysfs-bus-event_source-devices-events). A
-                listing of the events supported by a given nvdimm provider type
-                can be found in Documentation/driver-api/nvdimm/$provider.
-
-What:          /sys/bus/event_source/devices/nmemX/cpumask
-Date:          February 2022
-KernelVersion:  5.18
-Contact:        Kajol Jain <kjain@linux.ibm.com>
-Description:	(RO) This sysfs file exposes the cpumask which is designated to
-		to retrieve nvdimm pmu event counter data.

Documentation/ABI/testing/sysfs-bus-papr-pmem

@@ -61,15 +61,3 @@ Description:
 		* "CchRHCnt" : Cache Read Hit Count
 		* "CchWHCnt" : Cache Write Hit Count
 		* "FastWCnt" : Fast Write Count
-
-What:		/sys/bus/nd/devices/nmemX/papr/health_bitmap_inject
-Date:		Jan, 2022
-KernelVersion:	v5.17
-Contact:	linuxppc-dev <linuxppc-dev@lists.ozlabs.org>, nvdimm@lists.linux.dev,
-Description:
-		(RO) Reports the health bitmap inject bitmap that is applied to
-		bitmap received from PowerVM via the H_SCM_HEALTH. This is used
-		to forcibly set specific bits returned from Hcall. These is then
-		used to simulate various health or shutdown states for an nvdimm
-		and are set by user-space tools like ndctl by issuing a PAPR DSM.
-

Documentation/ABI/testing/sysfs-bus-pci

@@ -457,36 +457,3 @@ Description:
 
 		The file is writable if the PF is bound to a driver that
 		implements ->sriov_set_msix_vec_count().
-
-What:		/sys/bus/pci/devices/.../resourceN_resize
-Date:		September 2022
-Contact:	Alex Williamson <alex.williamson@redhat.com>
-Description:
-		These files provide an interface to PCIe Resizable BAR support.
-		A file is created for each BAR resource (N) supported by the
-		PCIe Resizable BAR extended capability of the device.  Reading
-		each file exposes the bitmap of available resource sizes:
-
-		# cat resource1_resize
-		00000000000001c0
-
-		The bitmap represents supported resource sizes for the BAR,
-		where bit0 = 1MB, bit1 = 2MB, bit2 = 4MB, etc.  In the above
-		example the device supports 64MB, 128MB, and 256MB BAR sizes.
-
-		When writing the file, the user provides the bit position of
-		the desired resource size, for example:
-
-		# echo 7 > resource1_resize
-
-		This indicates to set the size value corresponding to bit 7,
-		128MB.  The resulting size is 2 ^ (bit# + 20).  This definition
-		matches the PCIe specification of this capability.
-
-		In order to make use of resource resizing, all PCI drivers must
-		be unbound from the device and peer devices under the same
-		parent bridge may need to be soft removed.  In the case of
-		VGA devices, writing a resize value will remove low level
-		console drivers from the device.  Raw users of pci-sysfs
-		resourceN attributes must be terminated prior to resizing.
-		Success of the resizing operation is not guaranteed.

Documentation/ABI/testing/sysfs-bus-peci

@@ -1,16 +0,0 @@
-What:		/sys/bus/peci/rescan
-Date:		July 2021
-KernelVersion:	5.18
-Contact:	Iwona Winiarska <iwona.winiarska@intel.com>
-Description:
-		Writing a non-zero value to this attribute will
-		initiate scan for PECI devices on all PECI controllers
-		in the system.
-
-What:		/sys/bus/peci/devices/<controller_id>-<device_addr>/remove
-Date:		July 2021
-KernelVersion:	5.18
-Contact:	Iwona Winiarska <iwona.winiarska@intel.com>
-Description:
-		Writing a non-zero value to this attribute will
-		remove the PECI device and any of its children.

Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub

@@ -1,8 +0,0 @@
-What:		/sys/bus/platform/devices/<dev>/always_powered_in_suspend
-Date:		June 2022
-KernelVersion:	5.20
-Contact:	Matthias Kaehlcke <matthias@kaehlcke.net>
-		linux-usb@vger.kernel.org
-Description:
-		(RW) Controls whether the USB hub remains always powered
-		during system suspend or not.

Documentation/ABI/testing/sysfs-bus-surface_aggregator-tabletsw

@@ -1,57 +0,0 @@
-What:		/sys/bus/surface_aggregator/devices/01:0e:01:00:01/state
-Date:		July 2022
-KernelVersion:	5.20
-Contact:	Maximilian Luz <luzmaximilian@gmail.com>
-Description:
-		This attribute returns a string with the current type-cover
-		or device posture, as indicated by the embedded controller.
-		Currently returned posture states are:
-
-		- "disconnected": The type-cover has been disconnected.
-
-		- "closed": The type-cover has been folded closed and lies on
-		  top of the display.
-
-		- "laptop": The type-cover is open and in laptop-mode, i.e.,
-		  ready for normal use.
-
-		- "folded-canvas": The type-cover has been folded back
-		  part-ways, but does not lie flush with the back side of the
-		  device. In general, this means that the kick-stand is used
-		  and extended atop of the cover.
-
-		- "folded-back": The type cover has been fully folded back and
-		  lies flush with the back side of the device.
-
-		- "<unknown>": The current state is unknown to the driver, for
-		  example due to newer as-of-yet unsupported hardware.
-
-		New states may be introduced with new hardware. Users therefore
-		must not rely on this list of states being exhaustive and
-		gracefully handle unknown states.
-
-What:		/sys/bus/surface_aggregator/devices/01:26:01:00:01/state
-Date:		July 2022
-KernelVersion:	5.20
-Contact:	Maximilian Luz <luzmaximilian@gmail.com>
-Description:
-		This attribute returns a string with the current device posture, as indicated by the embedded controller. Currently
-		returned posture states are:
-
-		- "closed": The lid of the device is closed.
-
-		- "laptop": The lid of the device is opened and the device
-		  operates as a normal laptop.
-
-		- "slate": The screen covers the keyboard or has been flipped
-		  back and the device operates mainly based on touch input.
-
-		- "tablet": The device operates as tablet and exclusively
-		  relies on touch input (or external peripherals).
-
-		- "<unknown>": The current state is unknown to the driver, for
-		  example due to newer as-of-yet unsupported hardware.
-
-		New states may be introduced with new hardware. Users therefore
-		must not rely on this list of states being exhaustive and
-		gracefully handle unknown states.

Documentation/ABI/testing/sysfs-bus-thunderbolt

@@ -153,7 +153,7 @@ Date:		Jan 2020
 KernelVersion:	5.5
 Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
 Description:	This attribute reports number of RX lanes the device is
-		using simultaneously through its upstream port.
+		using simultaneusly through its upstream port.
 
 What:		/sys/bus/thunderbolt/devices/.../tx_speed
 Date:		Jan 2020
@@ -167,7 +167,7 @@ Date:		Jan 2020
 KernelVersion:	5.5
 Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
 Description:	This attribute reports number of TX lanes the device is
-		using simultaneously through its upstream port.
+		using simultaneusly through its upstream port.
 
 What:		/sys/bus/thunderbolt/devices/.../vendor
 Date:		Sep 2017
@@ -293,16 +293,6 @@ Contact:	thunderbolt-software@lists.01.org
 Description:	This contains XDomain service specific settings as
 		bitmask. Format: %x
 
-What:		/sys/bus/thunderbolt/devices/usb4_portX/connector
-Date:		April 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Symlink to the USB Type-C connector. This link is only
-		created when USB Type-C Connector Class is enabled,
-		and only if the system firmware is capable of
-		describing the connection between a port and its
-		connector.
-
 What:		/sys/bus/thunderbolt/devices/usb4_portX/link
 Date:		Sep 2021
 KernelVersion:	v5.14

Documentation/ABI/testing/sysfs-bus-usb

@@ -253,17 +253,6 @@ Description:
 		only if the system firmware is capable of describing the
 		connection between a port and its connector.
 
-What:		/sys/bus/usb/devices/.../<hub_interface>/port<X>/disable
-Date:		June 2022
-Contact:	Michael Grzeschik <m.grzeschik@pengutronix.de>
-Description:
-		This file controls the state of a USB port, including
-		Vbus power output (but only on hubs that support
-		power switching -- most hubs don't support it). If
-		a port is disabled, the port is unusable: Devices
-		attached to the port will not be detected, initialized,
-		or enumerated.
-
 What:		/sys/bus/usb/devices/.../power/usb2_lpm_l1_timeout
 Date:		May 2013
 Contact:	Mathias Nyman <mathias.nyman@linux.intel.com>

Documentation/ABI/testing/sysfs-bus-vdpa

@@ -1,57 +0,0 @@
-What:		/sys/bus/vdpa/driver_autoprobe
-Date:		March 2020
-Contact:	virtualization@lists.linux-foundation.org
-Description:
-		This file determines whether new devices are immediately bound
-		to a driver after the creation. It initially contains 1, which
-		means the kernel automatically binds devices to a compatible
-		driver immediately after they are created.
-
-		Writing "0" to this file disable this feature, any other string
-		enable it.
-
-What:		/sys/bus/vdpa/driver_probe
-Date:		March 2020
-Contact:	virtualization@lists.linux-foundation.org
-Description:
-		Writing a device name to this file will cause the kernel binds
-		devices to a compatible driver.
-
-		This can be useful when /sys/bus/vdpa/driver_autoprobe is
-		disabled.
-
-What:		/sys/bus/vdpa/drivers/.../bind
-Date:		March 2020
-Contact:	virtualization@lists.linux-foundation.org
-Description:
-		Writing a device name to this file will cause the driver to
-		attempt to bind to the device. This is useful for overriding
-		default bindings.
-
-What:		/sys/bus/vdpa/drivers/.../unbind
-Date:		March 2020
-Contact:	virtualization@lists.linux-foundation.org
-Description:
-		Writing a device name to this file will cause the driver to
-		attempt to unbind from the device. This may be useful when
-		overriding default bindings.
-
-What:		/sys/bus/vdpa/devices/.../driver_override
-Date:		November 2021
-Contact:	virtualization@lists.linux-foundation.org
-Description:
-		This file allows the driver for a device to be specified.
-		When specified, only a driver with a name matching the value
-		written to driver_override will have an opportunity to bind to
-		the device. The override is specified by writing a string to the
-		driver_override file (echo vhost-vdpa > driver_override) and may
-		be cleared with an empty string (echo > driver_override).
-		This returns the device to standard matching rules binding.
-		Writing to driver_override does not automatically unbind the
-		device from its current driver or make any attempt to
-		automatically load the specified driver. If no driver with a
-		matching name is currently loaded in the kernel, the device will
-		not bind to any driver. This also allows devices to opt-out of
-		driver binding using a driver_override name such as "none".
-		Only a single driver may be specified in the override, there is
-		no support for parsing delimiters.

Documentation/ABI/testing/sysfs-class-cxl

@@ -103,8 +103,8 @@ What:           /sys/class/cxl/<afu>/api_version_compatible
 Date:           September 2014
 Contact:        linuxppc-dev@lists.ozlabs.org
 Description:    read only
-                Decimal value of the lowest version of the userspace API
-                this kernel supports.
+                Decimal value of the the lowest version of the userspace API
+                this this kernel supports.
 Users:		https://github.com/ibm-capi/libcxl
 
 

Documentation/ABI/testing/sysfs-class-firmware

@@ -1,77 +0,0 @@
-What: 		/sys/class/firmware/.../data
-Date:		July 2022
-KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	The data sysfs file is used for firmware-fallback and for
-		firmware uploads. Cat a firmware image to this sysfs file
-		after you echo 1 to the loading sysfs file. When the firmware
-		image write is complete, echo 0 to the loading sysfs file. This
-		sequence will signal the completion of the firmware write and
-		signal the lower-level driver that the firmware data is
-		available.
-
-What: 		/sys/class/firmware/.../cancel
-Date:		July 2022
-KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	Write-only. For firmware uploads, write a "1" to this file to
-		request that the transfer of firmware data to the lower-level
-		device be canceled. This request will be rejected (EBUSY) if
-		the update cannot be canceled (e.g. a FLASH write is in
-		progress) or (ENODEV) if there is no firmware update in progress.
-
-What: 		/sys/class/firmware/.../error
-Date:		July 2022
-KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	Read-only. Returns a string describing a failed firmware
-		upload. This string will be in the form of <STATUS>:<ERROR>,
-		where <STATUS> will be one of the status strings described
-		for the status sysfs file and <ERROR> will be one of the
-		following: "hw-error", "timeout", "user-abort", "device-busy",
-		"invalid-file-size", "read-write-error", "flash-wearout". The
-		error sysfs file is only meaningful when the current firmware
-		upload status is "idle". If this file is read while a firmware
-		transfer is in progress, then the read will fail with EBUSY.
-
-What: 		/sys/class/firmware/.../loading
-Date:		July 2022
-KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	The loading sysfs file is used for both firmware-fallback and
-		for firmware uploads. Echo 1 onto the loading file to indicate
-		you are writing a firmware file to the data sysfs node. Echo
-		-1 onto this file to abort the data write or echo 0 onto this
-		file to indicate that the write is complete. For firmware
-		uploads, the zero value also triggers the transfer of the
-		firmware data to the lower-level device driver.
-
-What: 		/sys/class/firmware/.../remaining_size
-Date:		July 2022
-KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	Read-only. For firmware upload, this file contains the size
-		of the firmware data that remains to be transferred to the
-		lower-level device driver. The size value is initialized to
-		the full size of the firmware image that was previously
-		written to the data sysfs file. This value is periodically
-		updated during the "transferring" phase of the firmware
-		upload.
-		Format: "%u".
-
-What: 		/sys/class/firmware/.../status
-Date:		July 2022
-KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	Read-only. Returns a string describing the current status of
-		a firmware upload. The string will be one of the following:
-		idle, "receiving", "preparing", "transferring", "programming".
-
-What: 		/sys/class/firmware/.../timeout
-Date:		July 2022
-KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	This file supports the timeout mechanism for firmware
-		fallback.  This file has no affect on firmware uploads. For
-		more information on timeouts please see the documentation
-		for firmware fallback.

Documentation/ABI/testing/sysfs-class-firmware-attributes

@@ -116,7 +116,7 @@ Description:
 					    <value>[ForceIf:<attribute>=<value>]
 					    <value>[ForceIfNot:<attribute>=<value>]
 
-					For example::
+					For example:
 
 					    LegacyOrom/dell_value_modifier has value:
 						    Disabled[ForceIf:SecureBoot=Enabled]
@@ -212,7 +212,7 @@ Description:
 		the next boot.
 
 		Lenovo specific class extensions
-		--------------------------------
+		------------------------------
 
 		On Lenovo systems the following additional settings are available:
 
@@ -246,55 +246,6 @@ Description:
 					that is being referenced (e.g hdd0, hdd1 etc)
 					This attribute defaults to device 0.
 
-		certificate, signature, save_signature:
-					These attributes are used for certificate based authentication. This is
-					used in conjunction with a signing server as an alternative to password
-					based authentication.
-					The user writes to the attribute(s) with a BASE64 encoded string obtained
-					from the signing server.
-					The attributes can be displayed to check the stored value.
-
-					Some usage examples:
-
-						Installing a certificate to enable feature::
-
-							echo "supervisor password" > authentication/Admin/current_password
-							echo "signed certificate" > authentication/Admin/certificate
-
-						Updating the installed certificate::
-
-							echo "signature" > authentication/Admin/signature
-							echo "signed certificate" > authentication/Admin/certificate
-
-						Removing the installed certificate::
-
-							echo "signature" > authentication/Admin/signature
-							echo "" > authentication/Admin/certificate
-
-						Changing a BIOS setting::
-
-							echo "signature" > authentication/Admin/signature
-							echo "save signature" > authentication/Admin/save_signature
-							echo Enable > attribute/PasswordBeep/current_value
-
-					You cannot enable certificate authentication if a supervisor password
-					has not been set.
-					Clearing the certificate results in no bios-admin authentication method
-					being configured allowing anyone to make changes.
-					After any of these operations the system must reboot for the changes to
-					take effect.
-
-		certificate_thumbprint:
-					Read only attribute used to display the MD5, SHA1 and SHA256 thumbprints
-					for the certificate installed in the BIOS.
-
-		certificate_to_password:
-					Write only attribute used to switch from certificate based authentication
-					back to password based.
-					Usage::
-
-						echo "signature" > authentication/Admin/signature
-						echo "password" > authentication/Admin/certificate_to_password
 
 
 What:		/sys/class/firmware-attributes/*/attributes/pending_reboot
@@ -349,7 +300,7 @@ Description:
 
 		    # echo "factory" > /sys/class/firmware-attributes/*/device/attributes/reset_bios
 		    # cat /sys/class/firmware-attributes/*/device/attributes/reset_bios
-		    builtinsafe lastknowngood [factory] custom
+		    # builtinsafe lastknowngood [factory] custom
 
 		Note that any changes to this attribute requires a reboot
 		for changes to take effect.

Documentation/ABI/testing/sysfs-class-hwmon

@@ -9,14 +9,6 @@ Description:
 
 		RO
 
-What:		/sys/class/hwmon/hwmonX/label
-Description:
-		A descriptive label that allows to uniquely identify a
-		device within the system.
-		The contents of the label are free-form.
-
-		RO
-
 What:		/sys/class/hwmon/hwmonX/update_interval
 Description:
 		The interval at which the chip will update readings.
@@ -938,12 +930,3 @@ Description:
 		- 1: enable
 
 		RW
-
-What:		/sys/class/hwmon/hwmonX/device/pec
-Description:
-		PEC support on I2C devices
-
-		- 0, off, n: disable
-		- 1, on, y: enable
-
-		RW

Documentation/ABI/testing/sysfs-class-power

@@ -364,10 +364,7 @@ Date:		April 2019
 Contact:	linux-pm@vger.kernel.org
 Description:
 		Represents a battery percentage level, above which charging will
-		stop. Not all hardware is capable of setting this to an arbitrary
-		percentage. Drivers will round written values to the nearest
-		supported value. Reading back the value will show the actual
-		threshold set by the driver.
+		stop.
 
 		Access: Read, Write
 
@@ -383,17 +380,13 @@ Description:
 		algorithm to adjust the charge rate dynamically, without
 		any user configuration required. "Custom" means that the charger
 		uses the charge_control_* properties as configuration for some
-		different algorithm. "Long Life" means the charger reduces its
-		charging rate in order to prolong the battery health. "Bypass"
-		means the charger bypasses the charging path around the
-		integrated converter allowing for a "smart" wall adaptor to
-		perform the power conversion externally.
+		different algorithm.
 
 		Access: Read, Write
 
 		Valid values:
 			      "Unknown", "N/A", "Trickle", "Fast", "Standard",
-			      "Adaptive", "Custom", "Long Life", "Bypass"
+			      "Adaptive", "Custom"
 
 What:		/sys/class/power_supply/<supply_name>/charge_term_current
 Date:		July 2014
@@ -475,7 +468,6 @@ Description:
 			auto:            Charge normally, respect thresholds
 			inhibit-charge:  Do not charge while AC is attached
 			force-discharge: Force discharge while AC is attached
-			================ ====================================
 
 What:		/sys/class/power_supply/<supply_name>/technology
 Date:		May 2007

Documentation/ABI/testing/sysfs-class-pwm

@@ -81,7 +81,7 @@ Description:
 What:		/sys/class/pwm/pwmchip<N>/pwmX/capture
 Date:		June 2016
 KernelVersion:	4.8
-Contact:	Lee Jones <lee@kernel.org>
+Contact:	Lee Jones <lee.jones@linaro.org>
 Description:
 		Capture information about a PWM signal. The output format is a
 		pair unsigned integers (period and duty cycle), separated by a

Documentation/ABI/testing/sysfs-class-regulator

@@ -370,84 +370,3 @@ Description:
 
 		'unknown' means software cannot determine the state, or
 		the reported state is invalid.
-
-What:		/sys/class/regulator/.../under_voltage
-Date:		April 2022
-KernelVersion:	5.18
-Contact:	Zev Weiss <zev@bewilderbeest.net>
-Description:
-		Some regulator directories will contain a field called
-		under_voltage.  This indicates if the device reports an
-		under-voltage fault (1) or not (0).
-
-What:		/sys/class/regulator/.../over_current
-Date:		April 2022
-KernelVersion:	5.18
-Contact:	Zev Weiss <zev@bewilderbeest.net>
-Description:
-		Some regulator directories will contain a field called
-		over_current.  This indicates if the device reports an
-		over-current fault (1) or not (0).
-
-What:		/sys/class/regulator/.../regulation_out
-Date:		April 2022
-KernelVersion:	5.18
-Contact:	Zev Weiss <zev@bewilderbeest.net>
-Description:
-		Some regulator directories will contain a field called
-		regulation_out.  This indicates if the device reports an
-		out-of-regulation fault (1) or not (0).
-
-What:		/sys/class/regulator/.../fail
-Date:		April 2022
-KernelVersion:	5.18
-Contact:	Zev Weiss <zev@bewilderbeest.net>
-Description:
-		Some regulator directories will contain a field called
-		fail.  This indicates if the device reports an output failure
-		(1) or not (0).
-
-What:		/sys/class/regulator/.../over_temp
-Date:		April 2022
-KernelVersion:	5.18
-Contact:	Zev Weiss <zev@bewilderbeest.net>
-Description:
-		Some regulator directories will contain a field called
-		over_temp.  This indicates if the device reports an
-		over-temperature fault (1) or not (0).
-
-What:		/sys/class/regulator/.../under_voltage_warn
-Date:		April 2022
-KernelVersion:	5.18
-Contact:	Zev Weiss <zev@bewilderbeest.net>
-Description:
-		Some regulator directories will contain a field called
-		under_voltage_warn.  This indicates if the device reports an
-		under-voltage warning (1) or not (0).
-
-What:		/sys/class/regulator/.../over_current_warn
-Date:		April 2022
-KernelVersion:	5.18
-Contact:	Zev Weiss <zev@bewilderbeest.net>
-Description:
-		Some regulator directories will contain a field called
-		over_current_warn.  This indicates if the device reports an
-		over-current warning (1) or not (0).
-
-What:		/sys/class/regulator/.../over_voltage_warn
-Date:		April 2022
-KernelVersion:	5.18
-Contact:	Zev Weiss <zev@bewilderbeest.net>
-Description:
-		Some regulator directories will contain a field called
-		over_voltage_warn.  This indicates if the device reports an
-		over-voltage warning (1) or not (0).
-
-What:		/sys/class/regulator/.../over_temp_warn
-Date:		April 2022
-KernelVersion:	5.18
-Contact:	Zev Weiss <zev@bewilderbeest.net>
-Description:
-		Some regulator directories will contain a field called
-		over_temp_warn.  This indicates if the device reports an
-		over-temperature warning (1) or not (0).

Documentation/ABI/testing/sysfs-class-rtrs-client

@@ -78,7 +78,7 @@ What:		/sys/class/rtrs-client/<session-name>/paths/<src@dst>/hca_name
 Date:		Feb 2020
 KernelVersion:	5.7
 Contact:	Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com>
-Description:	RO, Contains the name of HCA the connection established on.
+Description:	RO, Contains the the name of HCA the connection established on.
 
 What:		/sys/class/rtrs-client/<session-name>/paths/<src@dst>/hca_port
 Date:		Feb 2020

Documentation/ABI/testing/sysfs-class-rtrs-server

@@ -24,7 +24,7 @@ What:		/sys/class/rtrs-server/<session-name>/paths/<src@dst>/hca_name
 Date:		Feb 2020
 KernelVersion:	5.7
 Contact:	Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com>
-Description:	RO, Contains the name of HCA the connection established on.
+Description:	RO, Contains the the name of HCA the connection established on.
 
 What:		/sys/class/rtrs-server/<session-name>/paths/<src@dst>/hca_port
 Date:		Feb 2020

Documentation/ABI/testing/sysfs-class-thermal

@@ -203,7 +203,7 @@ Description:
 
 		- for generic ACPI: should be "Fan", "Processor" or "LCD"
 		- for memory controller device on intel_menlow platform:
-		  should be "Memory controller".
+		should be "Memory controller".
 
 		RO, Required
 

Documentation/ABI/testing/sysfs-class-typec

@@ -141,14 +141,6 @@ Description:
 		- "reverse": CC2 orientation
 		- "unknown": Orientation cannot be determined.
 
-What:		/sys/class/typec/<port>/select_usb_power_delivery
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Lists the USB Power Delivery Capabilities that the port can
-		advertise to the partner. The currently used capabilities are in
-		brackets. Selection happens by writing to the file.
-
 USB Type-C partner devices (eg. /sys/class/typec/port0-partner/)
 
 What:		/sys/class/typec/<port>-partner/accessory_mode

Documentation/ABI/testing/sysfs-class-usb_power_delivery

@@ -1,240 +0,0 @@
-What:		/sys/class/usb_power_delivery
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Directory for USB Power Delivery devices.
-
-What:		/sys/class/usb_power_delivery/.../revision
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		File showing the USB Power Delivery Specification Revision used
-		in communication.
-
-What:		/sys/class/usb_power_delivery/.../version
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		This is an optional attribute file showing the version of the
-		specific revision of the USB Power Delivery Specification. In
-		most cases the specification version is not known and the file
-		is not available.
-
-What:		/sys/class/usb_power_delivery/.../source-capabilities
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		The source capabilities message "Source_Capabilities" contains a
-		set of Power Data Objects (PDO), each representing a type of
-		power supply. The order of the PDO objects is defined in the USB
-		Power Delivery Specification. Each PDO - power supply - will
-		have its own device, and the PDO device name will start with the
-		object position number as the first character followed by the
-		power supply type name (":" as delimiter).
-
-			/sys/class/usb_power_delivery/.../source_capabilities/<position>:<type>
-
-What:		/sys/class/usb_power_delivery/.../sink-capabilities
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		The sink capability message "Sink_Capabilities" contains a set
-		of Power Data Objects (PDO) just like with source capabilities,
-		but instead of describing the power capabilities, these objects
-		describe the power requirements.
-
-		The order of the objects in the sink capability message is the
-		same as with the source capabilities message.
-
-Fixed Supplies
-
-What:		/sys/class/usb_power_delivery/.../<capability>/<position>:fixed_supply
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Devices containing the attributes (the bit fields) defined for
-		Fixed Supplies.
-
-		The device "1:fixed_supply" is special. USB Power Delivery
-		Specification dictates that the first PDO (at object position
-		1), and the only mandatory PDO, is always the vSafe5V Fixed
-		Supply Object. vSafe5V Object has additional fields defined for
-		it that the other Fixed Supply Objects do not have and that are
-		related to the USB capabilities rather than power capabilities.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/dual_role_power
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		This file contains boolean value that tells does the device
-		support both source and sink power roles.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/usb_suspend_supported
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		This file shows the value of the USB Suspend Supported bit in
-		vSafe5V Fixed Supply Object. If the bit is set then the device
-		will follow the USB 2.0 and USB 3.2 rules for suspend and
-		resume.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/unconstrained_power
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		This file shows the value of the Unconstrained Power bit in
-		vSafe5V Fixed Supply Object. The bit is set when an external
-		source of power, powerful enough to power the entire system on
-		its own, is available for the device.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/usb_communication_capable
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		This file shows the value of the USB Communication Capable bit in
-		vSafe5V Fixed Supply Object.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/dual_role_data
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		This file shows the value of the Dual-Role Data bit in vSafe5V
-		Fixed Supply Object. Dual role data means ability act as both
-		USB host and USB device.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/unchunked_extended_messages_supported
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		This file shows the value of the Unchunked Extended Messages
-		Supported bit in vSafe5V Fixed Supply Object.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/<position>:fixed_supply/voltage
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		The voltage the supply supports in millivolts.
-
-What:		/sys/class/usb_power_delivery/.../source-capabilities/<position>:fixed_supply/maximum_current
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Maximum current of the fixed source supply in milliamperes.
-
-What:		/sys/class/usb_power_delivery/.../sink-capabilities/<position>:fixed_supply/operational_current
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Operational current of the sink in milliamperes.
-
-What:		/sys/class/usb_power_delivery/.../sink-capabilities/<position>:fixed_supply/fast_role_swap_current
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		This file contains the value of the "Fast Role Swap USB Type-C
-		Current" field that tells the current level the sink requires
-		after a Fast Role Swap.
-		0 - Fast Swap not supported"
-		1 - Default USB Power"
-		2 - 1.5A@5V"
-		3 - 3.0A@5V"
-
-Variable Supplies
-
-What:		/sys/class/usb_power_delivery/.../<capability>/<position>:variable_supply
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Variable Power Supply PDO.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/<position>:variable_supply/maximum_voltage
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Maximum Voltage in millivolts.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/<position>:variable_supply/minimum_voltage
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Minimum Voltage in millivolts.
-
-What:		/sys/class/usb_power_delivery/.../source-capabilities/<position>:variable_supply/maximum_current
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		The maximum current in milliamperes that the source can supply
-		at the given Voltage range.
-
-What:		/sys/class/usb_power_delivery/.../sink-capabilities/<position>:variable_supply/operational_current
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		The operational current in milliamperes that the sink requires
-		at the given Voltage range.
-
-Battery Supplies
-
-What:		/sys/class/usb_power_delivery/.../<capability>/<position>:battery
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Battery PDO.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/<position>:battery/maximum_voltage
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Maximum Voltage in millivolts.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/<position>:battery/minimum_voltage
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Minimum Voltage in millivolts.
-
-What:		/sys/class/usb_power_delivery/.../source-capabilities/<position>:battery/maximum_power
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Maximum allowable Power in milliwatts.
-
-What:		/sys/class/usb_power_delivery/.../sink-capabilities/<position>:battery/operational_power
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		The operational power that the sink requires at the given
-		voltage range.
-
-Standard Power Range (SPR) Programmable Power Supplies
-
-What:		/sys/class/usb_power_delivery/.../<capability>/<position>:programmable_supply
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Programmable Power Supply (PPS) Augmented PDO (APDO).
-
-What:		/sys/class/usb_power_delivery/.../<capability>/<position>:programmable_supply/maximum_voltage
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Maximum Voltage in millivolts.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/<position>:programmable_supply/minimum_voltage
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Minimum Voltage in millivolts.
-
-What:		/sys/class/usb_power_delivery/.../<capability>/<position>:programmable_supply/maximum_current
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		Maximum Current in milliamperes.
-
-What:		/sys/class/usb_power_delivery/.../source-capabilities/<position>:programmable_supply/pps_power_limited
-Date:		May 2022
-Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
-Description:
-		The PPS Power Limited bit indicates whether or not the source
-		supply will exceed the rated output power if requested.

Documentation/ABI/testing/sysfs-class-vduse

@@ -1,33 +0,0 @@
-What:		/sys/class/vduse/
-Date:		Oct 2021
-KernelVersion:	5.15
-Contact:	Yongji Xie <xieyongji@bytedance.com>
-Description:
-		The vduse/ class sub-directory belongs to the VDUSE
-		framework and provides a sysfs interface for configuring
-		VDUSE devices.
-
-What:		/sys/class/vduse/control/
-Date:		Oct 2021
-KernelVersion:	5.15
-Contact:	Yongji Xie <xieyongji@bytedance.com>
-Description:
-		This directory entry is created for the control device
-		of VDUSE framework.
-
-What:		/sys/class/vduse/<device-name>/
-Date:		Oct 2021
-KernelVersion:	5.15
-Contact:	Yongji Xie <xieyongji@bytedance.com>
-Description:
-		This directory entry is created when a VDUSE device is
-		created via the control device.
-
-What:		/sys/class/vduse/<device-name>/msg_timeout
-Date:		Oct 2021
-KernelVersion:	5.15
-Contact:	Yongji Xie <xieyongji@bytedance.com>
-Description:
-		(RW) The timeout (in seconds) for waiting for the control
-		message's response from userspace. Default value is 30s.
-		Writing a '0' to the file means to disable the timeout.

Documentation/ABI/testing/sysfs-devices-hisi_ptt

@@ -1,61 +0,0 @@
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune
-Date:		October 2022
-KernelVersion:	6.1
-Contact:	Yicong Yang <yangyicong@hisilicon.com>
-Description:	This directory contains files for tuning the PCIe link
-		parameters(events). Each file is named after the event
-		of the PCIe link.
-
-		See Documentation/trace/hisi-ptt.rst for more information.
-
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_cpl
-Date:		October 2022
-KernelVersion:	6.1
-Contact:	Yicong Yang <yangyicong@hisilicon.com>
-Description:	(RW) Controls the weight of Tx completion TLPs, which influence
-		the proportion of outbound completion TLPs on the PCIe link.
-		The available tune data is [0, 1, 2]. Writing a negative value
-		will return an error, and out of range values will be converted
-		to 2. The value indicates a probable level of the event.
-
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_np
-Date:		October 2022
-KernelVersion:	6.1
-Contact:	Yicong Yang <yangyicong@hisilicon.com>
-Description:	(RW) Controls the weight of Tx non-posted TLPs, which influence
-		the proportion of outbound non-posted TLPs on the PCIe link.
-		The available tune data is [0, 1, 2]. Writing a negative value
-		will return an error, and out of range values will be converted
-		to 2. The value indicates a probable level of the event.
-
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_p
-Date:		October 2022
-KernelVersion:	6.1
-Contact:	Yicong Yang <yangyicong@hisilicon.com>
-Description:	(RW) Controls the weight of Tx posted TLPs, which influence the
-		proportion of outbound posted TLPs on the PCIe link.
-		The available tune data is [0, 1, 2]. Writing a negative value
-		will return an error, and out of range values will be converted
-		to 2. The value indicates a probable level of the event.
-
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/rx_alloc_buf_level
-Date:		October 2022
-KernelVersion:	6.1
-Contact:	Yicong Yang <yangyicong@hisilicon.com>
-Description:	(RW) Control the allocated buffer watermark for inbound packets.
-		The packets will be stored in the buffer first and then transmitted
-		either when the watermark reached or when timed out.
-		The available tune data is [0, 1, 2]. Writing a negative value
-		will return an error, and out of range values will be converted
-		to 2. The value indicates a probable level of the event.
-
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/tx_alloc_buf_level
-Date:		October 2022
-KernelVersion:	6.1
-Contact:	Yicong Yang <yangyicong@hisilicon.com>
-Description:	(RW) Control the allocated buffer watermark of outbound packets.
-		The packets will be stored in the buffer first and then transmitted
-		either when the watermark reached or when timed out.
-		The available tune data is [0, 1, 2]. Writing a negative value
-		will return an error, and out of range values will be converted
-		to 2. The value indicates a probable level of the event.

Documentation/ABI/testing/sysfs-devices-physical_location

@@ -1,42 +0,0 @@
-What:		/sys/devices/.../physical_location
-Date:		March 2022
-Contact:	Won Chung <wonchung@google.com>
-Description:
-		This directory contains information on physical location of
-		the device connection point with respect to the system's
-		housing.
-
-What:		/sys/devices/.../physical_location/panel
-Date:		March 2022
-Contact:	Won Chung <wonchung@google.com>
-Description:
-		Describes which panel surface of the system’s housing the
-		device connection point resides on.
-
-What:		/sys/devices/.../physical_location/vertical_position
-Date:		March 2022
-Contact:	Won Chung <wonchung@google.com>
-Description:
-		Describes vertical position of the device connection point on
-		the panel surface.
-
-What:		/sys/devices/.../physical_location/horizontal_position
-Date:		March 2022
-Contact:	Won Chung <wonchung@google.com>
-Description:
-		Describes horizontal position of the device connection point on
-		the panel surface.
-
-What:		/sys/devices/.../physical_location/dock
-Date:		March 2022
-Contact:	Won Chung <wonchung@google.com>
-Description:
-		"Yes" if the device connection point resides in a docking
-		station or a port replicator. "No" otherwise.
-
-What:		/sys/devices/.../physical_location/lid
-Date:		March 2022
-Contact:	Won Chung <wonchung@google.com>
-Description:
-		"Yes" if the device connection point resides on the lid of
-		laptop system. "No" otherwise.

Documentation/ABI/testing/sysfs-devices-platform-ACPI-TAD

@@ -74,7 +74,7 @@ Description:
 
 		Reads also cause the AC alarm timer status to be reset.
 
-		Another way to reset the status of the AC alarm timer is to
+		Another way to reset the the status of the AC alarm timer is to
 		write (the number) 0 to this file.
 
 		If the status return value indicates that the timer has expired,

Documentation/ABI/testing/sysfs-devices-platform-soc-ipa

@@ -46,69 +46,33 @@ Description:
 		that is supported by the hardware.  The possible values
 		are "MAPv4" or "MAPv5".
 
-What:		.../XXXXXXX.ipa/endpoint_id/
-Date:		July 2022
-KernelVersion:	v5.19
-Contact:	Alex Elder <elder@kernel.org>
-Description:
-		The .../XXXXXXX.ipa/endpoint_id/ directory contains
-		attributes that define IDs associated with IPA
-		endpoints.  The "rx" or "tx" in an endpoint name is
-		from the perspective of the AP.  An endpoint ID is a
-		small unsigned integer.
-
-What:		.../XXXXXXX.ipa/endpoint_id/modem_rx
-Date:		July 2022
-KernelVersion:	v5.19
-Contact:	Alex Elder <elder@kernel.org>
-Description:
-		The .../XXXXXXX.ipa/endpoint_id/modem_rx file contains
-		the ID of the AP endpoint on which packets originating
-		from the embedded modem are received.
-
-What:		.../XXXXXXX.ipa/endpoint_id/modem_tx
-Date:		July 2022
-KernelVersion:	v5.19
-Contact:	Alex Elder <elder@kernel.org>
-Description:
-		The .../XXXXXXX.ipa/endpoint_id/modem_tx file contains
-		the ID of the AP endpoint on which packets destined
-		for the embedded modem are sent.
-
-What:		.../XXXXXXX.ipa/endpoint_id/monitor_rx
-Date:		July 2022
-KernelVersion:	v5.19
-Contact:	Alex Elder <elder@kernel.org>
-Description:
-		The .../XXXXXXX.ipa/endpoint_id/monitor_rx file contains
-		the ID of the AP endpoint on which IPA "monitor" data is
-		received.  The monitor endpoint supplies replicas of
-		packets that enter the IPA hardware for processing.
-		Each replicated packet is preceded by a fixed-size "ODL"
-		header (see .../XXXXXXX.ipa/feature/monitor, above).
-		Large packets are truncated, to reduce the bandwidth
-		required to provide the monitor function.
-
 What:		.../XXXXXXX.ipa/modem/
 Date:		June 2021
 KernelVersion:	v5.14
 Contact:	Alex Elder <elder@kernel.org>
 Description:
-		The .../XXXXXXX.ipa/modem/ directory contains attributes
-		describing properties of the modem embedded in the SoC.
+		The .../XXXXXXX.ipa/modem/ directory contains a set of
+		attributes describing properties of the modem execution
+		environment reachable by the IPA hardware.
 
 What:		.../XXXXXXX.ipa/modem/rx_endpoint_id
 Date:		June 2021
 KernelVersion:	v5.14
 Contact:	Alex Elder <elder@kernel.org>
 Description:
-		The .../XXXXXXX.ipa/modem/rx_endpoint_id file duplicates
-		the value found in .../XXXXXXX.ipa/endpoint_id/modem_rx.
+		The .../XXXXXXX.ipa/feature/rx_endpoint_id file contains
+		the AP endpoint ID that receives packets originating from
+		the modem execution environment.  The "rx" is from the
+		perspective of the AP; this endpoint is considered an "IPA
+		producer".  An endpoint ID is a small unsigned integer.
 
 What:		.../XXXXXXX.ipa/modem/tx_endpoint_id
 Date:		June 2021
 KernelVersion:	v5.14
 Contact:	Alex Elder <elder@kernel.org>
 Description:
-		The .../XXXXXXX.ipa/modem/tx_endpoint_id file duplicates
-		the value found in .../XXXXXXX.ipa/endpoint_id/modem_tx.
+		The .../XXXXXXX.ipa/feature/tx_endpoint_id file contains
+		the AP endpoint ID used to transmit packets destined for
+		the modem execution environment.  The "tx" is from the
+		perspective of the AP; this endpoint is considered an "IPA
+		consumer".  An endpoint ID is a small unsigned integer.

Documentation/ABI/testing/sysfs-devices-power

@@ -303,5 +303,5 @@ Date:		Apr 2010
 Contact:	Dominik Brodowski <linux@dominikbrodowski.net>
 Description:
 		Reports the runtime PM children usage count of a device, or
-		0 if the children will be ignored.
+		0 if the the children will be ignored.
 

Documentation/ABI/testing/sysfs-devices-soc

@@ -1,6 +1,6 @@
 What:		/sys/devices/socX
 Date:		January 2012
-contact:	Lee Jones <lee@kernel.org>
+contact:	Lee Jones <lee.jones@linaro.org>
 Description:
 		The /sys/devices/ directory contains a sub-directory for each
 		System-on-Chip (SoC) device on a running platform. Information
@@ -14,14 +14,14 @@ Description:
 
 What:		/sys/devices/socX/machine
 Date:		January 2012
-contact:	Lee Jones <lee@kernel.org>
+contact:	Lee Jones <lee.jones@linaro.org>
 Description:
 		Read-only attribute common to all SoCs. Contains the SoC machine
 		name (e.g. Ux500).
 
 What:		/sys/devices/socX/family
 Date:		January 2012
-contact:	Lee Jones <lee@kernel.org>
+contact:	Lee Jones <lee.jones@linaro.org>
 Description:
 		Read-only attribute common to all SoCs. Contains SoC family name
 		(e.g. DB8500).
@@ -59,7 +59,7 @@ Description:
 
 What:		/sys/devices/socX/soc_id
 Date:		January 2012
-contact:	Lee Jones <lee@kernel.org>
+contact:	Lee Jones <lee.jones@linaro.org>
 Description:
 		Read-only attribute supported by most SoCs. In the case of
 		ST-Ericsson's chips this contains the SoC serial number.
@@ -72,21 +72,21 @@ Description:
 
 What:		/sys/devices/socX/revision
 Date:		January 2012
-contact:	Lee Jones <lee@kernel.org>
+contact:	Lee Jones <lee.jones@linaro.org>
 Description:
 		Read-only attribute supported by most SoCs. Contains the SoC's
 		manufacturing revision number.
 
 What:		/sys/devices/socX/process
 Date:		January 2012
-contact:	Lee Jones <lee@kernel.org>
+contact:	Lee Jones <lee.jones@linaro.org>
 Description:
 		Read-only attribute supported ST-Ericsson's silicon. Contains the
 		the process by which the silicon chip was manufactured.
 
 What:		/sys/bus/soc
 Date:		January 2012
-contact:	Lee Jones <lee@kernel.org>
+contact:	Lee Jones <lee.jones@linaro.org>
 Description:
 		The /sys/bus/soc/ directory contains the usual sub-folders
 		expected under most buses. /sys/bus/soc/devices is of particular

Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -67,12 +67,12 @@ Description:	Discover NUMA node a CPU belongs to
 		/sys/devices/system/cpu/cpu42/node2 -> ../../node/node2
 
 
-What:		/sys/devices/system/cpu/cpuX/topology/core_siblings
+What:		/sys/devices/system/cpu/cpuX/topology/core_id
+		/sys/devices/system/cpu/cpuX/topology/core_siblings
 		/sys/devices/system/cpu/cpuX/topology/core_siblings_list
 		/sys/devices/system/cpu/cpuX/topology/physical_package_id
 		/sys/devices/system/cpu/cpuX/topology/thread_siblings
 		/sys/devices/system/cpu/cpuX/topology/thread_siblings_list
-		/sys/devices/system/cpu/cpuX/topology/ppin
 Date:		December 2008
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	CPU topology files that describe a logical CPU's relationship
@@ -83,6 +83,10 @@ Description:	CPU topology files that describe a logical CPU's relationship
 
 		Briefly, the files above are:
 
+		core_id: the CPU core ID of cpuX. Typically it is the
+		hardware platform's identifier (rather than the kernel's).
+		The actual value is architecture and platform dependent.
+
 		core_siblings: internal kernel map of cpuX's hardware threads
 		within the same physical_package_id.
 
@@ -99,11 +103,6 @@ Description:	CPU topology files that describe a logical CPU's relationship
 		thread_siblings_list: human-readable list of cpuX's hardware
 		threads within the same core as cpuX
 
-		ppin: human-readable Protected Processor Identification
-		Number of the socket the cpu# belongs to. There should be
-		one per physical_package_id. File is readable only to
-		admin.
-
 		See Documentation/admin-guide/cputopology.rst for more information.
 
 
@@ -296,7 +295,7 @@ Description:	Processor frequency boosting control
 
 		This switch controls the boost setting for the whole system.
 		Boosting allows the CPU and the firmware to run at a frequency
-		beyond its nominal limit.
+		beyond it's nominal limit.
 
 		More details can be found in
 		Documentation/admin-guide/pm/cpufreq.rst
@@ -488,13 +487,12 @@ What:		/sys/devices/system/cpu/cpuX/regs/
 		/sys/devices/system/cpu/cpuX/regs/identification/
 		/sys/devices/system/cpu/cpuX/regs/identification/midr_el1
 		/sys/devices/system/cpu/cpuX/regs/identification/revidr_el1
-		/sys/devices/system/cpu/cpuX/regs/identification/smidr_el1
 Date:		June 2016
 Contact:	Linux ARM Kernel Mailing list <linux-arm-kernel@lists.infradead.org>
 Description:	AArch64 CPU registers
 
 		'identification' directory exposes the CPU ID registers for
-		identifying model and revision of the CPU and SMCU.
+		identifying model and revision of the CPU.
 
 What:		/sys/devices/system/cpu/aarch32_el0
 Date:		May 2021
@@ -522,8 +520,6 @@ What:		/sys/devices/system/cpu/vulnerabilities
 		/sys/devices/system/cpu/vulnerabilities/srbds
 		/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
 		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
-		/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
-		/sys/devices/system/cpu/vulnerabilities/retbleed
 Date:		January 2018
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	Information about CPU vulnerabilities
@@ -666,7 +662,6 @@ Description:	Preferred MTE tag checking mode
 
 		================  ==============================================
 		"sync"	  	  Prefer synchronous mode
-		"asymm"	  	  Prefer asymmetric mode
 		"async"	  	  Prefer asynchronous mode
 		================  ==============================================
 

Documentation/ABI/testing/sysfs-devices-vfio-dev

@@ -1,8 +0,0 @@
-What:		 /sys/.../<device>/vfio-dev/vfioX/
-Date:		 September 2022
-Contact:	 Yi Liu <yi.l.liu@intel.com>
-Description:
-		 This directory is created when the device is bound to a
-		 vfio driver. The layout under this directory matches what
-		 exists for a standard 'struct device'. 'X' is a unique
-		 index marking this device in vfio.

Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing

@@ -1,4 +1,4 @@
-What:		/sys/bus/platform/drivers/aspeed-uart-routing/\*/uart\*
+What:		/sys/bus/platform/drivers/aspeed-uart-routing/*/uart*
 Date:		September 2021
 Contact:	Oskar Senft <osk@google.com>
 		Chia-Wei Wang <chiawei_wang@aspeedtech.com>
@@ -9,7 +9,7 @@ Description:	Selects the RX source of the UARTx device.
 		depends on the selected file.
 
 		e.g.
-		cat /sys/bus/platform/drivers/aspeed-uart-routing/\*.uart_routing/uart1
+		cat /sys/bus/platform/drivers/aspeed-uart-routing/*.uart_routing/uart1
 		[io1] io2 io3 io4 uart2 uart3 uart4 io6
 
 		In this case, UART1 gets its input from IO1 (physical serial port 1).
@@ -17,7 +17,7 @@ Description:	Selects the RX source of the UARTx device.
 Users:		OpenBMC.  Proposed changes should be mailed to
 		openbmc@lists.ozlabs.org
 
-What:		/sys/bus/platform/drivers/aspeed-uart-routing/\*/io\*
+What:		/sys/bus/platform/drivers/aspeed-uart-routing/*/io*
 Date:		September 2021
 Contact:	Oskar Senft <osk@google.com>
 		Chia-Wei Wang <chiawei_wang@aspeedtech.com>

Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator

@@ -26,6 +26,6 @@ Description:	Read/write the current state of DDR Backup Mode, which controls
 		     DDR Backup Mode must be explicitly enabled by the user,
 		     to invoke step 1.
 
-		See also Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml.
+		See also Documentation/devicetree/bindings/mfd/bd9571mwv.txt.
 Users:		User space applications for embedded boards equipped with a
 		BD9571MWV PMIC.

Documentation/ABI/testing/sysfs-driver-ccp

@@ -1,87 +0,0 @@
-What:		/sys/bus/pci/devices/<BDF>/fused_part
-Date:		June 2022
-KernelVersion:	5.19
-Contact:	mario.limonciello@amd.com
-Description:
-		The /sys/bus/pci/devices/<BDF>/fused_part file reports
-		whether the CPU or APU has been fused to prevent tampering.
-		0: Not fused
-		1: Fused
-
-What:		/sys/bus/pci/devices/<BDF>/debug_lock_on
-Date:		June 2022
-KernelVersion:	5.19
-Contact:	mario.limonciello@amd.com
-Description:
-		The /sys/bus/pci/devices/<BDF>/debug_lock_on reports
-		whether the AMD CPU or APU has been unlocked for debugging.
-		Possible values:
-		0: Not locked
-		1: Locked
-
-What:		/sys/bus/pci/devices/<BDF>/tsme_status
-Date:		June 2022
-KernelVersion:	5.19
-Contact:	mario.limonciello@amd.com
-Description:
-		The /sys/bus/pci/devices/<BDF>/tsme_status file reports
-		the status of transparent secure memory encryption on AMD systems.
-		Possible values:
-		0: Not active
-		1: Active
-
-What:		/sys/bus/pci/devices/<BDF>/anti_rollback_status
-Date:		June 2022
-KernelVersion:	5.19
-Contact:	mario.limonciello@amd.com
-Description:
-		The /sys/bus/pci/devices/<BDF>/anti_rollback_status file reports
-		whether the PSP is enforcing rollback protection.
-		Possible values:
-		0: Not enforcing
-		1: Enforcing
-
-What:		/sys/bus/pci/devices/<BDF>/rpmc_production_enabled
-Date:		June 2022
-KernelVersion:	5.19
-Contact:	mario.limonciello@amd.com
-Description:
-		The /sys/bus/pci/devices/<BDF>/rpmc_production_enabled file reports
-		whether Replay Protected Monotonic Counter support has been enabled.
-		Possible values:
-		0: Not enabled
-		1: Enabled
-
-What:		/sys/bus/pci/devices/<BDF>/rpmc_spirom_available
-Date:		June 2022
-KernelVersion:	5.19
-Contact:	mario.limonciello@amd.com
-Description:
-		The /sys/bus/pci/devices/<BDF>/rpmc_spirom_available file reports
-		whether an Replay Protected Monotonic Counter supported SPI is installed
-		on the system.
-		Possible values:
-		0: Not present
-		1: Present
-
-What:		/sys/bus/pci/devices/<BDF>/hsp_tpm_available
-Date:		June 2022
-KernelVersion:	5.19
-Contact:	mario.limonciello@amd.com
-Description:
-		The /sys/bus/pci/devices/<BDF>/hsp_tpm_available file reports
-		whether the HSP TPM has been activated.
-		Possible values:
-		0: Not activated or present
-		1: Activated
-
-What:		/sys/bus/pci/devices/<BDF>/rom_armor_enforced
-Date:		June 2022
-KernelVersion:	5.19
-Contact:	mario.limonciello@amd.com
-Description:
-		The /sys/bus/pci/devices/<BDF>/rom_armor_enforced file reports
-		whether RomArmor SPI protection is enforced.
-		Possible values:
-		0: Not enforced
-		1: Enforced

Documentation/ABI/testing/sysfs-driver-chromeos-acpi

@@ -1,137 +0,0 @@
-What:		/sys/bus/platform/devices/GGL0001:*/BINF.2
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns active EC firmware of current boot (boolean).
-
-		== ===============================
-		0  Read only (recovery) firmware.
-		1  Rewritable firmware.
-		== ===============================
-
-What:		/sys/bus/platform/devices/GGL0001:*/BINF.3
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns main firmware type for current boot (integer).
-
-		== =====================================
-		0  Recovery.
-		1  Normal.
-		2  Developer.
-		3  Netboot (factory installation only).
-		== =====================================
-
-What:		/sys/bus/platform/devices/GGL0001:*/CHSW
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns switch position for Chrome OS specific hardware
-		switches when the firmware is booted (integer).
-
-		==== ===========================================
-		0    No changes.
-		2    Recovery button was pressed.
-		4    Recovery button was pressed (EC firmware).
-		32   Developer switch was enabled.
-		512  Firmware write protection was disabled.
-		==== ===========================================
-
-What:		/sys/bus/platform/devices/GGL0001:*/FMAP
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns physical memory address of the start of the main
-		processor firmware flashmap.
-
-What:		/sys/bus/platform/devices/GGL0001:*/FRID
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns firmware version for the read-only portion of the
-		main processor firmware.
-
-What:		/sys/bus/platform/devices/GGL0001:*/FWID
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns firmware version for the rewritable portion of the
-		main processor firmware.
-
-What:		/sys/bus/platform/devices/GGL0001:*/GPIO.X/GPIO.0
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns type of the GPIO signal for the Chrome OS specific
-		GPIO assignments (integer).
-
-		=========== ==================================
-		1           Recovery button.
-		2           Developer mode switch.
-		3           Firmware write protection switch.
-		256 to 511  Debug header GPIO 0 to GPIO 255.
-		=========== ==================================
-
-What:		/sys/bus/platform/devices/GGL0001:*/GPIO.X/GPIO.1
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns signal attributes of the GPIO signal (integer bitfield).
-
-		== =======================
-		0  Signal is active low.
-		1  Signal is active high.
-		== =======================
-
-What:		/sys/bus/platform/devices/GGL0001:*/GPIO.X/GPIO.2
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns the GPIO number on the specified GPIO
-		controller.
-
-What:		/sys/bus/platform/devices/GGL0001:*/GPIO.X/GPIO.3
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns name of the GPIO controller.
-
-What:		/sys/bus/platform/devices/GGL0001:*/HWID
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns hardware ID for the Chromebook.
-
-What:		/sys/bus/platform/devices/GGL0001:*/MECK
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns the SHA-1 or SHA-256 hash that is read out of the
-		Management Engine extended registers during boot. The hash
-		is exported via ACPI so the OS can verify that the Management
-		Engine firmware has not changed. If Management Engine is not
-		present, or if the firmware was unable to read the extended registers, this buffer size can be zero.
-
-What:		/sys/bus/platform/devices/GGL0001:*/VBNV.0
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns offset in CMOS bank 0 of the verified boot non-volatile
-		storage block, counting from the first writable CMOS byte
-		(that is, 'offset = 0' is the byte following the 14 bytes of
-		clock data).
-
-What:		/sys/bus/platform/devices/GGL0001:*/VBNV.1
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Return the size in bytes of the verified boot non-volatile
-		storage block.
-
-What:		/sys/bus/platform/devices/GGL0001:*/VDAT
-Date:		May 2022
-KernelVersion:	5.19
-Description:
-		Returns the verified boot data block shared between the
-		firmware verification step and the kernel verification step
-		(binary).

Documentation/ABI/testing/sysfs-driver-eud

@@ -1,9 +0,0 @@
-What:		/sys/bus/platform/drivers/eud/.../enable
-Date:           February 2022
-Contact:        Souradeep Chowdhury <quic_schowdhu@quicinc.com>
-Description:
-		The Enable/Disable sysfs interface for Embedded
-		USB Debugger(EUD). This enables and disables the
-		EUD based on a 1 or a 0 value. By enabling EUD,
-		the user is able to activate the mini-usb hub of
-		EUD for debug and trace capabilities.

Documentation/ABI/testing/sysfs-driver-habanalabs

@@ -16,7 +16,7 @@ Description:    Version of the application running on the device's CPU
 
 What:           /sys/class/habanalabs/hl<n>/clk_max_freq_mhz
 Date:           Jun 2019
-KernelVersion:  5.7
+KernelVersion:  not yet upstreamed
 Contact:        ogabbay@kernel.org
 Description:    Allows the user to set the maximum clock frequency, in MHz.
                 The device clock might be set to lower value than the maximum.
@@ -26,7 +26,7 @@ Description:    Allows the user to set the maximum clock frequency, in MHz.
 
 What:           /sys/class/habanalabs/hl<n>/clk_cur_freq_mhz
 Date:           Jun 2019
-KernelVersion:  5.7
+KernelVersion:  not yet upstreamed
 Contact:        ogabbay@kernel.org
 Description:    Displays the current frequency, in MHz, of the device clock.
                 This property is valid only for the Gaudi ASIC family
@@ -69,12 +69,6 @@ KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
 Description:    Displays the device's version from the eFuse
 
-What:           /sys/class/habanalabs/hl<n>/fw_os_ver
-Date:           Dec 2021
-KernelVersion:  5.18
-Contact:        ogabbay@kernel.org
-Description:    Version of the firmware OS running on the device's CPU
-
 What:           /sys/class/habanalabs/hl<n>/hard_reset
 Date:           Jan 2019
 KernelVersion:  5.1
@@ -121,7 +115,7 @@ What:           /sys/class/habanalabs/hl<n>/infineon_ver
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
-Description:    Version of the Device's power supply F/W code. Relevant only to GOYA and GAUDI
+Description:    Version of the Device's power supply F/W code
 
 What:           /sys/class/habanalabs/hl<n>/max_power
 Date:           Jan 2019
@@ -176,12 +170,6 @@ KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
 Description:    Version of the device's preboot F/W code
 
-What:           /sys/class/habanalabs/hl<n>/security_enabled
-Date:           Oct 2022
-KernelVersion:  6.1
-Contact:        obitton@habana.ai
-Description:    Displays the device's security status
-
 What:           /sys/class/habanalabs/hl<n>/soft_reset
 Date:           Jan 2019
 KernelVersion:  5.1
@@ -232,10 +220,4 @@ What:           /sys/class/habanalabs/hl<n>/uboot_ver
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
-Description:    Version of the u-boot running on the device's CPU
-
-What:           /sys/class/habanalabs/hl<n>/vrm_ver
-Date:           Jan 2022
-KernelVersion:  5.17
-Contact:        ogabbay@kernel.org
-Description:    Version of the Device's Voltage Regulator Monitor F/W code. N/A to GOYA and GAUDI
+Description:    Version of the u-boot running on the device's CPU

Documentation/ABI/testing/sysfs-driver-intel-m10-bmc-sec-update

@@ -1,61 +0,0 @@
-What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/sr_root_entry_hash
-Date:		Sep 2022
-KernelVersion:	5.20
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	Read only. Returns the root entry hash for the static
-		region if one is programmed, else it returns the
-		string: "hash not programmed".  This file is only
-		visible if the underlying device supports it.
-		Format: string.
-
-What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/pr_root_entry_hash
-Date:		Sep 2022
-KernelVersion:	5.20
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	Read only. Returns the root entry hash for the partial
-		reconfiguration region if one is programmed, else it
-		returns the string: "hash not programmed".  This file
-		is only visible if the underlying device supports it.
-		Format: string.
-
-What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/bmc_root_entry_hash
-Date:		Sep 2022
-KernelVersion:	5.20
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	Read only. Returns the root entry hash for the BMC image
-		if one is programmed, else it returns the string:
-		"hash not programmed".  This file is only visible if the
-		underlying device supports it.
-		Format: string.
-
-What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/sr_canceled_csks
-Date:		Sep 2022
-KernelVersion:	5.20
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	Read only. Returns a list of indices for canceled code
-		signing keys for the static region. The standard bitmap
-		list format is used (e.g. "1,2-6,9").
-
-What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/pr_canceled_csks
-Date:		Sep 2022
-KernelVersion:	5.20
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	Read only. Returns a list of indices for canceled code
-		signing keys for the partial reconfiguration region. The
-		standard bitmap list format is used (e.g. "1,2-6,9").
-
-What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/bmc_canceled_csks
-Date:		Sep 2022
-KernelVersion:	5.20
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	Read only. Returns a list of indices for canceled code
-		signing keys for the BMC.  The standard bitmap list format
-		is used (e.g. "1,2-6,9").
-
-What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/flash_count
-Date:		Sep 2022
-KernelVersion:	5.20
-Contact:	Russ Weight <russell.h.weight@intel.com>
-Description:	Read only. Returns number of times the secure update
-		staging area has been flashed.
-		Format: "%u".

Documentation/ABI/testing/sysfs-driver-intel_sdsi

@@ -1,79 +0,0 @@
-What:		/sys/bus/auxiliary/devices/intel_vsec.sdsi.X
-Date:		Feb 2022
-KernelVersion:	5.18
-Contact:	"David E. Box" <david.e.box@linux.intel.com>
-Description:
-		This directory contains interface files for accessing Intel
-		Software Defined Silicon (SDSi) features on a CPU. X
-		represents the socket instance (though not the socket ID).
-		The socket ID is determined by reading the registers file
-		and decoding it per the specification.
-
-		Some files communicate with SDSi hardware through a mailbox.
-		Should the operation fail, one of the following error codes
-		may be returned:
-
-		==========	=====
-		Error Code	Cause
-		==========	=====
-		EIO		General mailbox failure. Log may indicate cause.
-		EBUSY		Mailbox is owned by another agent.
-		EPERM		SDSI capability is not enabled in hardware.
-		EPROTO		Failure in mailbox protocol detected by driver.
-				See log for details.
-		EOVERFLOW	For provision commands, the size of the data
-				exceeds what may be written.
-		ESPIPE		Seeking is not allowed.
-		ETIMEDOUT	Failure to complete mailbox transaction in time.
-		==========	=====
-
-What:		/sys/bus/auxiliary/devices/intel_vsec.sdsi.X/guid
-Date:		Feb 2022
-KernelVersion:	5.18
-Contact:	"David E. Box" <david.e.box@linux.intel.com>
-Description:
-		(RO) The GUID for the registers file. The GUID identifies
-		the layout of the registers file in this directory.
-		Information about the register layouts for a particular GUID
-		is available at http://github.com/intel/intel-sdsi
-
-What:		/sys/bus/auxiliary/devices/intel_vsec.sdsi.X/registers
-Date:		Feb 2022
-KernelVersion:	5.18
-Contact:	"David E. Box" <david.e.box@linux.intel.com>
-Description:
-		(RO) Contains information needed by applications to provision
-		a CPU and monitor status information. The layout of this file
-		is determined by the GUID in this directory. Information about
-		the layout for a particular GUID is available at
-		http://github.com/intel/intel-sdsi
-
-What:		/sys/bus/auxiliary/devices/intel_vsec.sdsi.X/provision_akc
-Date:		Feb 2022
-KernelVersion:	5.18
-Contact:	"David E. Box" <david.e.box@linux.intel.com>
-Description:
-		(WO) Used to write an Authentication Key Certificate (AKC) to
-		the SDSi NVRAM for the CPU. The AKC is used to authenticate a
-		Capability Activation Payload. Mailbox command.
-
-What:		/sys/bus/auxiliary/devices/intel_vsec.sdsi.X/provision_cap
-Date:		Feb 2022
-KernelVersion:	5.18
-Contact:	"David E. Box" <david.e.box@linux.intel.com>
-Description:
-		(WO) Used to write a Capability Activation Payload (CAP) to the
-		SDSi NVRAM for the CPU. CAPs are used to activate a given CPU
-		feature. A CAP is validated by SDSi hardware using a previously
-		provisioned AKC file. Upon successful authentication, the CPU
-		configuration is updated. A cold reboot is required to fully
-		activate the feature. Mailbox command.
-
-What:		/sys/bus/auxiliary/devices/intel_vsec.sdsi.X/state_certificate
-Date:		Feb 2022
-KernelVersion:	5.18
-Contact:	"David E. Box" <david.e.box@linux.intel.com>
-Description:
-		(RO) Used to read back the current State Certificate for the CPU
-		from SDSi hardware. The State Certificate contains information
-		about the current licenses on the CPU. Mailbox command.

Documentation/ABI/testing/sysfs-driver-qat

@@ -1,49 +0,0 @@
-What:		/sys/bus/pci/devices/<BDF>/qat/state
-Date:		June 2022
-KernelVersion:	5.20
-Contact:	qat-linux@intel.com
-Description:	(RW) Reports the current state of the QAT device. Write to
-		the file to start or stop the device.
-
-		The values are:
-
-		* up: the device is up and running
-		* down: the device is down
-
-
-		It is possible to transition the device from up to down only
-		if the device is up and vice versa.
-
-		This attribute is only available for qat_4xxx devices.
-
-What:		/sys/bus/pci/devices/<BDF>/qat/cfg_services
-Date:		June 2022
-KernelVersion:	5.20
-Contact:	qat-linux@intel.com
-Description:	(RW) Reports the current configuration of the QAT device.
-		Write to the file to change the configured services.
-
-		The values are:
-
-		* sym;asym: the device is configured for running crypto
-		  services
-		* dc: the device is configured for running compression services
-
-		It is possible to set the configuration only if the device
-		is in the `down` state (see /sys/bus/pci/devices/<BDF>/qat/state)
-
-		The following example shows how to change the configuration of
-		a device configured for running crypto services in order to
-		run data compression::
-
-			# cat /sys/bus/pci/devices/<BDF>/qat/state
-			up
-			# cat /sys/bus/pci/devices/<BDF>/qat/cfg_services
-			sym;asym
-			# echo down > /sys/bus/pci/devices/<BDF>/qat/state
-			# echo dc > /sys/bus/pci/devices/<BDF>/qat/cfg_services
-			# echo up > /sys/bus/pci/devices/<BDF>/qat/state
-			# cat /sys/bus/pci/devices/<BDF>/qat/cfg_services
-			dc
-
-		This attribute is only available for qat_4xxx devices.

Documentation/ABI/testing/sysfs-driver-ufs

@@ -1417,15 +1417,6 @@ Description:	This node is used to set or display whether UFS WriteBooster is
 		platform that doesn't support UFSHCD_CAP_CLK_SCALING, we can
 		disable/enable WriteBooster through this sysfs node.
 
-What:		/sys/bus/platform/drivers/ufshcd/*/enable_wb_buf_flush
-What:		/sys/bus/platform/devices/*.ufs/enable_wb_buf_flush
-Date:		July 2022
-Contact:	Jinyoung Choi <j-young.choi@samsung.com>
-Description:	This entry shows the status of WriteBooster buffer flushing
-		and it can be used to enable or disable the flushing.
-		If flushing is enabled, the device executes the flush
-		operation when the command queue is empty.
-
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/hpb_version
 What:		/sys/bus/platform/devices/*.ufs/device_descriptor/hpb_version
 Date:		June 2021
@@ -1527,7 +1518,7 @@ Description:	This entry shows the number of reads that cannot be changed to
 
 		The file is read only.
 
-What:		/sys/class/scsi_device/*/device/hpb_stats/rcmd_noti_cnt
+What:		/sys/class/scsi_device/*/device/hpb_stats/rb_noti_cnt
 Date:		June 2021
 Contact:	Daejun Park <daejun7.park@samsung.com>
 Description:	This entry shows the number of response UPIUs that has
@@ -1535,23 +1526,19 @@ Description:	This entry shows the number of response UPIUs that has
 
 		The file is read only.
 
-What:		/sys/class/scsi_device/*/device/hpb_stats/rcmd_active_cnt
+What:		/sys/class/scsi_device/*/device/hpb_stats/rb_active_cnt
 Date:		June 2021
 Contact:	Daejun Park <daejun7.park@samsung.com>
-Description:	For the HPB device control mode, this entry shows the number of
-        active sub-regions recommended by response UPIUs. For the HPB host control
-        mode, this entry shows the number of active sub-regions recommended by the
-        HPB host control mode heuristic algorithm.
+Description:	This entry shows the number of active sub-regions recommended by
+		response UPIUs.
 
 		The file is read only.
 
-What:		/sys/class/scsi_device/*/device/hpb_stats/rcmd_inactive_cnt
+What:		/sys/class/scsi_device/*/device/hpb_stats/rb_inactive_cnt
 Date:		June 2021
 Contact:	Daejun Park <daejun7.park@samsung.com>
-Description:	For the HPB device control mode, this entry shows the number of
-        inactive regions recommended by response UPIUs. For the HPB host control
-        mode, this entry shows the number of inactive regions recommended by the
-        HPB host control mode heuristic algorithm.
+Description:	This entry shows the number of inactive regions recommended by
+		response UPIUs.
 
 		The file is read only.
 
@@ -1600,43 +1587,6 @@ Description:	This entry shows the status of HPB.
 
 		The file is read only.
 
-Contact:	Daniil Lunev <dlunev@chromium.org>
-What:		/sys/bus/platform/drivers/ufshcd/*/capabilities/
-What:		/sys/bus/platform/devices/*.ufs/capabilities/
-Date:		August 2022
-Description:	The group represents the effective capabilities of the
-		host-device pair. i.e. the capabilities which are enabled in the
-		driver for the specific host controller, supported by the host
-		controller and are supported and/or have compatible
-		configuration on the device side.
-
-Contact:	Daniil Lunev <dlunev@chromium.org>
-What:		/sys/bus/platform/drivers/ufshcd/*/capabilities/clock_scaling
-What:		/sys/bus/platform/devices/*.ufs/capabilities/clock_scaling
-Date:		August 2022
-Contact:	Daniil Lunev <dlunev@chromium.org>
-Description:	Indicates status of clock scaling.
-
-		== ============================
-		0  Clock scaling is not supported.
-		1  Clock scaling is supported.
-		== ============================
-
-		The file is read only.
-
-What:		/sys/bus/platform/drivers/ufshcd/*/capabilities/write_booster
-What:		/sys/bus/platform/devices/*.ufs/capabilities/write_booster
-Date:		August 2022
-Contact:	Daniil Lunev <dlunev@chromium.org>
-Description:	Indicates status of Write Booster.
-
-		== ============================
-		0  Write Booster can not be enabled.
-		1  Write Booster can be enabled.
-		== ============================
-
-		The file is read only.
-
 What:		/sys/class/scsi_device/*/device/hpb_param_sysfs/activation_thld
 Date:		February 2021
 Contact:	Avri Altman <avri.altman@wdc.com>

Documentation/ABI/testing/sysfs-driver-xen-blkback

@@ -29,7 +29,7 @@ Description:
 What:           /sys/module/xen_blkback/parameters/buffer_squeeze_duration_ms
 Date:           December 2019
 KernelVersion:  5.6
-Contact:        Maximilian Heyne <mheyne@amazon.de>
+Contact:        SeongJae Park <sj@kernel.org>
 Description:
                 When memory pressure is reported to blkback this option
                 controls the duration in milliseconds that blkback will not
@@ -39,8 +39,8 @@ Description:
 What:           /sys/module/xen_blkback/parameters/feature_persistent
 Date:           September 2020
 KernelVersion:  5.10
-Contact:        Maximilian Heyne <mheyne@amazon.de>
+Contact:        SeongJae Park <sj@kernel.org>
 Description:
                 Whether to enable the persistent grants feature or not.  Note
-                that this option only takes effect on newly connected backends.
+                that this option only takes effect on newly created backends.
                 The default is Y (enable).

Documentation/ABI/testing/sysfs-driver-xen-blkfront

@@ -12,8 +12,8 @@ Description:
 What:           /sys/module/xen_blkfront/parameters/feature_persistent
 Date:           September 2020
 KernelVersion:  5.10
-Contact:        Maximilian Heyne <mheyne@amazon.de>
+Contact:        SeongJae Park <sj@kernel.org>
 Description:
                 Whether to enable the persistent grants feature or not.  Note
-                that this option only takes effect on newly connected frontends.
+                that this option only takes effect on newly created frontends.
                 The default is Y (enable).

Documentation/ABI/testing/sysfs-firmware-papr-energy-scale-info

@@ -1,29 +0,0 @@
-What:		/sys/firmware/papr/energy_scale_info
-Date:		February 2022
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
-Description:	Directory hosting a set of platform attributes like
-		energy/frequency on Linux running as a PAPR guest.
-
-		Each file in a directory contains a platform
-		attribute hierarchy pertaining to performance/
-		energy-savings mode and processor frequency.
-
-What:		/sys/firmware/papr/energy_scale_info/<id>
-Date:		February 2022
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
-Description:	Energy, frequency attributes directory for POWERVM servers
-
-What:		/sys/firmware/papr/energy_scale_info/<id>/desc
-Date:		February 2022
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
-Description:	String description of the energy attribute of <id>
-
-What:		/sys/firmware/papr/energy_scale_info/<id>/value
-Date:		February 2022
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
-Description:	Numeric value of the energy attribute of <id>
-
-What:		/sys/firmware/papr/energy_scale_info/<id>/value_desc
-Date:		February 2022
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
-Description:	String value of the energy attribute of <id>

Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg

@@ -12,9 +12,8 @@ Description:
 		configuration data to the guest userspace.
 
 		The authoritative guest-side hardware interface documentation
-		to the fw_cfg device can be found in "docs/specs/fw_cfg.rst"
-		in the QEMU source tree, or online at:
-		https://qemu-project.gitlab.io/qemu/specs/fw_cfg.html
+		to the fw_cfg device can be found in "docs/specs/fw_cfg.txt"
+		in the QEMU source tree.
 
 		**SysFS fw_cfg Interface**
 

Documentation/ABI/testing/sysfs-fs-erofs

@@ -9,9 +9,8 @@ Description:	Shows all enabled kernel features.
 What:		/sys/fs/erofs/<disk>/sync_decompress
 Date:		November 2021
 Contact:	"Huang Jianan" <huangjianan@oppo.com>
-Description:	Control strategy of sync decompression:
-
+Description:	Control strategy of sync decompression
 		- 0 (default, auto): enable for readpage, and enable for
-		  readahead on atomic contexts only.
+				     readahead on atomic contexts only,
 		- 1 (force on): enable for readpage and readahead.
 		- 2 (force off): disable for all situations.

Documentation/ABI/testing/sysfs-fs-f2fs

@@ -55,9 +55,8 @@ Description:	Controls the in-place-update policy.
 		0x04  F2FS_IPU_UTIL
 		0x08  F2FS_IPU_SSR_UTIL
 		0x10  F2FS_IPU_FSYNC
-		0x20  F2FS_IPU_ASYNC
+		0x20  F2FS_IPU_ASYNC,
 		0x40  F2FS_IPU_NOCACHE
-		0x80  F2FS_IPU_HONOR_OPU_WRITE
 		====  =================
 
 		Refer segment.h for details.
@@ -99,33 +98,6 @@ Description:	Controls the issue rate of discard commands that consist of small
 		checkpoint is triggered, and issued during the checkpoint.
 		By default, it is disabled with 0.
 
-What:		/sys/fs/f2fs/<disk>/max_discard_request
-Date:		December 2021
-Contact:	"Konstantin Vyshetsky" <vkon@google.com>
-Description:	Controls the number of discards a thread will issue at a time.
-		Higher number will allow the discard thread to finish its work
-		faster, at the cost of higher latency for incomming I/O.
-
-What:		/sys/fs/f2fs/<disk>/min_discard_issue_time
-Date:		December 2021
-Contact:	"Konstantin Vyshetsky" <vkon@google.com>
-Description:	Controls the interval the discard thread will wait between
-		issuing discard requests when there are discards to be issued and
-		no I/O aware interruptions occur.
-
-What:		/sys/fs/f2fs/<disk>/mid_discard_issue_time
-Date:		December 2021
-Contact:	"Konstantin Vyshetsky" <vkon@google.com>
-Description:	Controls the interval the discard thread will wait between
-		issuing discard requests when there are discards to be issued and
-		an I/O aware interruption occurs.
-
-What:		/sys/fs/f2fs/<disk>/max_discard_issue_time
-Date:		December 2021
-Contact:	"Konstantin Vyshetsky" <vkon@google.com>
-Description:	Controls the interval the discard thread will wait when there are
-		no discard operations to be issued.
-
 What:		/sys/fs/f2fs/<disk>/discard_granularity
 Date:		July 2017
 Contact:	"Chao Yu" <yuchao0@huawei.com>
@@ -140,11 +112,6 @@ Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
 Description:	Set timeout to issue discard commands during umount.
 	        Default: 5 secs
 
-What:		/sys/fs/f2fs/<disk>/pending_discard
-Date:		November 2021
-Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
-Description:	Shows the number of pending discard commands in the queue.
-
 What:		/sys/fs/f2fs/<disk>/max_victim_search
 Date:		January 2014
 Contact:	"Jaegeuk Kim" <jaegeuk.kim@samsung.com>
@@ -297,16 +264,11 @@ Description:	Shows current reserved blocks in system, it may be temporarily
 What:		/sys/fs/f2fs/<disk>/gc_urgent
 Date:		August 2017
 Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
-Description:	Do background GC aggressively when set. Set to 0 by default.
-		gc urgent high(1): does GC forcibly in a period of given
-		gc_urgent_sleep_time and ignores I/O idling check. uses greedy
-		GC approach and turns SSR mode on.
-		gc urgent low(2): lowers the bar of checking I/O idling in
-		order to process outstanding discard commands and GC a
-		little bit aggressively. uses cost benefit GC approach.
-		gc urgent mid(3): does GC forcibly in a period of given
-		gc_urgent_sleep_time and executes a mid level of I/O idling check.
-		uses cost benefit GC approach.
+Description:	Do background GC aggressively when set. When gc_urgent = 1,
+		background thread starts to do GC by given gc_urgent_sleep_time
+		interval. When gc_urgent = 2, F2FS will lower the bar of
+		checking idle in order to process outstanding discard commands
+		and GC a little bit aggressively. It is set to 0 by default.
 
 What:		/sys/fs/f2fs/<disk>/gc_urgent_sleep_time
 Date:		August 2017
@@ -463,33 +425,8 @@ Description:	Show status of f2fs superblock in real time.
 		0x800  SBI_QUOTA_SKIP_FLUSH  skip flushing quota in current CP
 		0x1000 SBI_QUOTA_NEED_REPAIR quota file may be corrupted
 		0x2000 SBI_IS_RESIZEFS       resizefs is in process
-		0x4000 SBI_IS_FREEZING       freefs is in process
 		====== ===================== =================================
 
-What:		/sys/fs/f2fs/<disk>/stat/cp_status
-Date:		September 2022
-Contact:	"Chao Yu" <chao.yu@oppo.com>
-Description:	Show status of f2fs checkpoint in real time.
-
-		=============================== ==============================
-		cp flag				value
-		CP_UMOUNT_FLAG			0x00000001
-		CP_ORPHAN_PRESENT_FLAG		0x00000002
-		CP_COMPACT_SUM_FLAG		0x00000004
-		CP_ERROR_FLAG			0x00000008
-		CP_FSCK_FLAG			0x00000010
-		CP_FASTBOOT_FLAG		0x00000020
-		CP_CRC_RECOVERY_FLAG		0x00000040
-		CP_NAT_BITS_FLAG		0x00000080
-		CP_TRIMMED_FLAG			0x00000100
-		CP_NOCRC_RECOVERY_FLAG		0x00000200
-		CP_LARGE_NAT_BITMAP_FLAG	0x00000400
-		CP_QUOTA_NEED_FSCK_FLAG		0x00000800
-		CP_DISABLED_FLAG		0x00001000
-		CP_DISABLED_QUICK_FLAG		0x00002000
-		CP_RESIZEFS_FLAG		0x00004000
-		=============================== ==============================
-
 What:		/sys/fs/f2fs/<disk>/ckpt_thread_ioprio
 Date:		January 2021
 Contact:	"Daeho Jeong" <daehojeong@google.com>
@@ -561,7 +498,7 @@ Date:		July 2021
 Contact:	"Daeho Jeong" <daehojeong@google.com>
 Description:	Show how many segments have been reclaimed by GC during a specific
 		GC mode (0: GC normal, 1: GC idle CB, 2: GC idle greedy,
-		3: GC idle AT, 4: GC urgent high, 5: GC urgent low 6: GC urgent mid)
+		3: GC idle AT, 4: GC urgent high, 5: GC urgent low)
 		You can re-initialize this value to "0".
 
 What:		/sys/fs/f2fs/<disk>/gc_segment_mode
@@ -591,46 +528,3 @@ Description:	With "mode=fragment:block" mount options, we can scatter block allo
 		f2fs will allocate 1..<max_fragment_chunk> blocks in a chunk and make a hole
 		in the length of 1..<max_fragment_hole> by turns. This value can be set
 		between 1..512 and the default value is 4.
-
-What:		/sys/fs/f2fs/<disk>/gc_urgent_high_remaining
-Date:		December 2021
-Contact:	"Daeho Jeong" <daehojeong@google.com>
-Description:	You can set the trial count limit for GC urgent high mode with this value.
-		If GC thread gets to the limit, the mode will turn back to GC normal mode.
-		By default, the value is zero, which means there is no limit like before.
-
-What:		/sys/fs/f2fs/<disk>/max_roll_forward_node_blocks
-Date:		January 2022
-Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
-Description:	Controls max # of node block writes to be used for roll forward
-		recovery. This can limit the roll forward recovery time.
-
-What:		/sys/fs/f2fs/<disk>/unusable_blocks_per_sec
-Date:		June 2022
-Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
-Description:	Shows the number of unusable blocks in a section which was defined by
-		the zone capacity reported by underlying zoned device.
-
-What:		/sys/fs/f2fs/<disk>/current_atomic_write
-Date:		July 2022
-Contact:	"Daeho Jeong" <daehojeong@google.com>
-Description:	Show the total current atomic write block count, which is not committed yet.
-		This is a read-only entry.
-
-What:		/sys/fs/f2fs/<disk>/peak_atomic_write
-Date:		July 2022
-Contact:	"Daeho Jeong" <daehojeong@google.com>
-Description:	Show the peak value of total current atomic write block count after boot.
-		If you write "0" here, you can initialize to "0".
-
-What:		/sys/fs/f2fs/<disk>/committed_atomic_block
-Date:		July 2022
-Contact:	"Daeho Jeong" <daehojeong@google.com>
-Description:	Show the accumulated total committed atomic write block count after boot.
-		If you write "0" here, you can initialize to "0".
-
-What:		/sys/fs/f2fs/<disk>/revoked_atomic_block
-Date:		July 2022
-Contact:	"Daeho Jeong" <daehojeong@google.com>
-Description:	Show the accumulated total revoked atomic write block count after boot.
-		If you write "0" here, you can initialize to "0".

Documentation/ABI/testing/sysfs-kernel-livepatch

@@ -55,14 +55,6 @@ Description:
 		The object directory contains subdirectories for each function
 		that is patched within the object.
 
-What:		/sys/kernel/livepatch/<patch>/<object>/patched
-Date:		August 2022
-KernelVersion:	6.1.0
-Contact:	live-patching@vger.kernel.org
-Description:
-		An attribute which indicates whether the object is currently
-		patched.
-
 What:		/sys/kernel/livepatch/<patch>/<object>/<function,sympos>
 Date:		Nov 2014
 KernelVersion:	3.19.0

Documentation/ABI/testing/sysfs-kernel-mm-damon

@@ -1,285 +0,0 @@
-what:		/sys/kernel/mm/damon/
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Interface for Data Access MONitoring (DAMON).  Contains files
-		for controlling DAMON.  For more details on DAMON itself,
-		please refer to Documentation/admin-guide/mm/damon/index.rst.
-
-What:		/sys/kernel/mm/damon/admin/
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Interface for privileged users of DAMON.  Contains files for
-		controlling DAMON that aimed to be used by privileged users.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/nr_kdamonds
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing a number 'N' to this file creates the number of
-		directories for controlling each DAMON worker thread (kdamond)
-		named '0' to 'N-1' under the kdamonds/ directory.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/state
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing 'on' or 'off' to this file makes the kdamond starts or
-		stops, respectively.  Reading the file returns the keywords
-		based on the current status.  Writing 'commit' to this file
-		makes the kdamond reads the user inputs in the sysfs files
-		except 'state' again.  Writing 'update_schemes_stats' to the
-		file updates contents of schemes stats files of the kdamond.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/pid
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Reading this file returns the pid of the kdamond if it is
-		running.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/nr_contexts
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing a number 'N' to this file creates the number of
-		directories for controlling each DAMON context named '0' to
-		'N-1' under the contexts/ directory.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/avail_operations
-Date:		Apr 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Reading this file returns the available monitoring operations
-		sets on the currently running kernel.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/operations
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing a keyword for a monitoring operations set ('vaddr' for
-		virtual address spaces monitoring, 'fvaddr' for fixed virtual
-		address ranges monitoring, and 'paddr' for the physical address
-		space monitoring) to this file makes the context to use the
-		operations set.  Reading the file returns the keyword for the
-		operations set the context is set to use.
-
-		Note that only the operations sets that listed in
-		'avail_operations' file are valid inputs.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/monitoring_attrs/intervals/sample_us
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing a value to this file sets the sampling interval of the
-		DAMON context in microseconds as the value.  Reading this file
-		returns the value.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/monitoring_attrs/intervals/aggr_us
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing a value to this file sets the aggregation interval of
-		the DAMON context in microseconds as the value.  Reading this
-		file returns the value.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/monitoring_attrs/intervals/update_us
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing a value to this file sets the update interval of the
-		DAMON context in microseconds as the value.  Reading this file
-		returns the value.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/monitoring_attrs/nr_regions/min
-
-WDate:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing a value to this file sets the minimum number of
-		monitoring regions of the DAMON context as the value.  Reading
-		this file returns the value.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/monitoring_attrs/nr_regions/max
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing a value to this file sets the maximum number of
-		monitoring regions of the DAMON context as the value.  Reading
-		this file returns the value.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/targets/nr_targets
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing a number 'N' to this file creates the number of
-		directories for controlling each DAMON target of the context
-		named '0' to 'N-1' under the contexts/ directory.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/targets/<T>/pid_target
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing to and reading from this file sets and gets the pid of
-		the target process if the context is for virtual address spaces
-		monitoring, respectively.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/targets/<T>/regions/nr_regions
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing a number 'N' to this file creates the number of
-		directories for setting each DAMON target memory region of the
-		context named '0' to 'N-1' under the regions/ directory.  In
-		case of the virtual address space monitoring, DAMON
-		automatically sets the target memory region based on the target
-		processes' mappings.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/targets/<T>/regions/<R>/start
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing to and reading from this file sets and gets the start
-		address of the monitoring region.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/targets/<T>/regions/<R>/end
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing to and reading from this file sets and gets the end
-		address of the monitoring region.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/nr_schemes
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing a number 'N' to this file creates the number of
-		directories for controlling each DAMON-based operation scheme
-		of the context named '0' to 'N-1' under the schemes/ directory.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/action
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing to and reading from this file sets and gets the action
-		of the scheme.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/access_pattern/sz/min
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing to and reading from this file sets and gets the mimimum
-		size of the scheme's target regions in bytes.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/access_pattern/sz/max
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing to and reading from this file sets and gets the maximum
-		size of the scheme's target regions in bytes.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/access_pattern/nr_accesses/min
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing to and reading from this file sets and gets the manimum
-		'nr_accesses' of the scheme's target regions.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/access_pattern/nr_accesses/max
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing to and reading from this file sets and gets the maximum
-		'nr_accesses' of the scheme's target regions.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/access_pattern/age/min
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing to and reading from this file sets and gets the minimum
-		'age' of the scheme's target regions.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/access_pattern/age/max
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing to and reading from this file sets and gets the maximum
-		'age' of the scheme's target regions.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/ms
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing to and reading from this file sets and gets the time
-		quota of the scheme in milliseconds.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/bytes
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing to and reading from this file sets and gets the size
-		quota of the scheme in bytes.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/reset_interval_ms
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing to and reading from this file sets and gets the quotas
-		charge reset interval of the scheme in milliseconds.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/weights/sz_permil
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing to and reading from this file sets and gets the
-		under-quota limit regions prioritization weight for 'size' in
-		permil.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/weights/nr_accesses_permil
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing to and reading from this file sets and gets the
-		under-quota limit regions prioritization weight for
-		'nr_accesses' in permil.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/weights/age_permil
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing to and reading from this file sets and gets the
-		under-quota limit regions prioritization weight for 'age' in
-		permil.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/watermarks/metric
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing to and reading from this file sets and gets the metric
-		of the watermarks for the scheme.  The writable/readable
-		keywords for this file are 'none' for disabling the watermarks
-		feature, or 'free_mem_rate' for the system's global free memory
-		rate in permil.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/watermarks/interval_us
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing to and reading from this file sets and gets the metric
-		check interval of the watermarks for the scheme in
-		microseconds.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/watermarks/high
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing to and reading from this file sets and gets the high
-		watermark of the scheme in permil.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/watermarks/mid
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing to and reading from this file sets and gets the mid
-		watermark of the scheme in permil.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/watermarks/low
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Writing to and reading from this file sets and gets the low
-		watermark of the scheme in permil.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/stats/nr_tried
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Reading this file returns the number of regions that the action
-		of the scheme has tried to be applied.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/stats/sz_tried
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Reading this file returns the total size of regions that the
-		action of the scheme has tried to be applied in bytes.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/stats/nr_applied
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Reading this file returns the number of regions that the action
-		of the scheme has successfully applied.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/stats/sz_applied
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Reading this file returns the total size of regions that the
-		action of the scheme has successfully applied in bytes.
-
-What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/stats/qt_exceeds
-Date:		Mar 2022
-Contact:	SeongJae Park <sj@kernel.org>
-Description:	Reading this file returns the number of the exceed events of
-		the scheme's quotas.

Documentation/ABI/testing/sysfs-kernel-mm-ksm

@@ -41,7 +41,7 @@ Description:	Kernel Samepage Merging daemon sysfs interface
 		sleep_millisecs: how many milliseconds ksm should sleep between
 		scans.
 
-		See Documentation/mm/ksm.rst for more information.
+		See Documentation/vm/ksm.rst for more information.
 
 What:		/sys/kernel/mm/ksm/merge_across_nodes
 Date:		January 2013