Currently, filesystems supporting fscrypt need to implement some tricky
logic when creating encrypted symlinks, including handling a peculiar
on-disk format (struct fscrypt_symlink_data) and correctly calculating
the size of the encrypted symlink. Introduce helper functions to make
things a bit easier:
- fscrypt_prepare_symlink() computes and validates the size the symlink
target will require on-disk.
- fscrypt_encrypt_symlink() creates the encrypted target if needed.
The new helpers actually fix some subtle bugs. First, when checking
whether the symlink target was too long, filesystems didn't account for
the fact that the NUL padding is meant to be truncated if it would cause
the maximum length to be exceeded, as is done for filenames in
directories. Consequently users would receive ENAMETOOLONG when
creating symlinks close to what is supposed to be the maximum length.
For example, with EXT4 with a 4K block size, the maximum symlink target
length in an encrypted directory is supposed to be 4093 bytes (in
comparison to 4095 in an unencrypted directory), but in
FS_POLICY_FLAGS_PAD_32-mode only up to 4064 bytes were accepted.
Second, symlink targets of "." and ".." were not being encrypted, even
though they should be, as these names are special in *directory entries*
but not in symlink targets. Fortunately, we can fix this simply by
starting to encrypt them, as old kernels already accept them in
encrypted form.
Third, the output string length the filesystems were providing when
doing the actual encryption was incorrect, as it was forgotten to
exclude 'sizeof(struct fscrypt_symlink_data)'. Fortunately though, this
bug didn't make a difference.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
fscrypt.h included way too many other headers, given that it is included
by filesystems both with and without encryption support. Trim down the
includes list by moving the needed includes into more appropriate
places, and removing the unneeded ones.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Only fs/crypto/fname.c cares about treating the "." and ".." filenames
specially with regards to encryption, so move fscrypt_is_dot_dotdot()
from fscrypt.h to there.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The encryption modes are validated by fs/crypto/, not by individual
filesystems. Therefore, move fscrypt_valid_enc_modes() from fscrypt.h
to fscrypt_private.h.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Filesystems now only define their fscrypt_operations when they are
compiled with encryption support, so move the fscrypt_operations
declaration from fscrypt.h to fscrypt_supp.h.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
fscrypt_dummy_context_enabled() accesses ->s_cop, which now is only set
when the filesystem is built with encryption support. This didn't
actually matter because no filesystems called it. However, it will
start being used soon, so fix it by moving it from fscrypt.h to
fscrypt_supp.h and stubbing it out in fscrypt_notsupp.h.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Filesystems only ever access 'struct fscrypt_ctx' through fscrypt
functions. But when a filesystem is built without encryption support,
these functions are all stubbed out, so the declaration of fscrypt_ctx
is unneeded. Therefore, move it from fscrypt.h to fscrypt_supp.h.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The fscrypt_info kmem_cache is internal to fscrypt; filesystems don't
need to access it. So move its declaration into fscrypt_private.h.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
fscrypt_control_page() is already split into two versions depending on
whether the filesystem is being built with encryption support or not.
Move them into the appropriate headers.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
fscrypt_has_encryption_key() is already split into two versions
depending on whether the filesystem is being built with encryption
support or not. Move them into the appropriate headers.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
request with five new patches fixing review comments and errors.
Apart from three small fixes there's two larger patches that in the end
checks that memory to be registered really is normal cached memory.
-----BEGIN PGP SIGNATURE-----
iQI3BAABCgAhBQJaVzZeGhxqZW5zLndpa2xhbmRlckBsaW5hcm8ub3JnAAoJELWw
uEGXj+zTbVMQAOK22g34O1EouTBpFvw/Ch4aZ7AFr+NoXxyphhIeg/4RpWwCpiCY
+xDBv4aHk6Opv0uhWGJJHMzRgE6eNYjLVVd8tGpDtRdqQWJP0MYVH2sHu5bnfJZS
LfDUk+t2ULxgzVvIBvyccslTSAGqc5K0mnzW3DXrwkKtRmpfl27tg/OFph08lHni
dhAOeW4m6PGWcWlQklDlpykTt8KUHMaIx5eNx+IBCYDcfQkev3Te49EwDK05ObjU
MC6M1rZJmzb28UumkUC1B8nyS/PqxB8xrkyqYqehic6eBH9WIAn+paaLgSjocvqc
gXwScaTNyniUPBMR73sNyARzpYgI0CvcqJ9R0uIGlSmwj9LQqrc0vtiJAR0YDeir
FzweH8uhkU2qhZjH3WSoLGS4CSm2scIhEE3jbHpRjDdqvajoQBbOxPKusQnIjs/p
iDZwYKuvH2f7TQtdwigT36k7KP0688LRSUrp7CeY7sIlzj0M3CLEzU/5OORBgqIl
5KyOt6R8aVbQtABDBnzqIn1BYqA05KWzZFqwlDPckCNfBjgHd45rz4HGvwqCf9JI
dKZ3VZDtBOeQIpBRj02mbEn0mUhDyztd7we+WkzTz0AxmEAw8r8yn1035WhZILGw
ntXMk4PX9uVwQxReE0n1Gyv5UxCP1u+RMGE7G3hQoDBGNdhGxHw9bDqV
=0+NS
-----END PGP SIGNATURE-----
Merge tag 'tee-drv-dynamic-shm+fixes-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers
This pull request updates the previous tee-drv-dynamic-shm-for-v4.16 pull
request with five new patches fixing review comments and errors.
Apart from three small fixes there's two larger patches that in the end
checks that memory to be registered really is normal cached memory.
* tag 'tee-drv-dynamic-shm+fixes-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: shm: Potential NULL dereference calling tee_shm_register()
tee: shm: don't put_page on null shm->pages
tee: shm: make function __tee_shm_alloc static
tee: optee: check type of registered shared memory
tee: add start argument to shm_register callback
Signed-off-by: Olof Johansson <olof@lixom.net>
mlx5_get_vector_affinity used to call pci_irq_get_affinity and after
reverting the patch that sets the device affinity via PCI_IRQ_AFFINITY
API, calling pci_irq_get_affinity becomes useless and it breaks RDMA
mlx5 users. To fix this, this patch provides an alternative way to
retrieve IRQ vector affinity using legacy IRQ API, following
smp_affinity read procfs implementation.
Fixes: 231243c827 ("Revert mlx5: move affinity hints assignments to generic code")
Fixes: a435393aca ("mlx5: move affinity hints assignments to generic code")
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
There are systems platform information management interfaces (such as
HOST2BMC) for which we cannot disable local loopback multicast traffic.
Separate disable_local_lb_mc and disable_local_lb_uc capability bits so
driver will not disable multicast loopback traffic if not supported.
(It is expected that Firmware will not set disable_local_lb_mc if
HOST2BMC is running for example.)
Function mlx5_nic_vport_update_local_lb will do best effort to
disable/enable UC/MC loopback traffic and return success only in case it
succeeded to changed all allowed by Firmware.
Adapt mlx5_ib and mlx5e to support the new cap bits.
Fixes: 2c43c5a036 ("net/mlx5e: Enable local loopback in loopback selftest")
Fixes: c85023e153 ("IB/mlx5: Add raw ethernet local loopback support")
Fixes: bded747bb4 ("net/mlx5: Add raw ethernet local loopback firmware command")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
<linux/libfdt.h> is a wrapper of scripts/dtc/libfdt/libfdt.h
It should not do more than its job. In fact, libfdt.h depends
on fdt.h, and scripts/dtc/libfdt/libfdt.h includes fdt.h already.
Trust the work in the upstream DTC project.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-01-11
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Various BPF related improvements and fixes to nfp driver: i) do
not register XDP RXQ structure to control queues, ii) round up
program stack size to word size for nfp, iii) restrict MTU changes
when BPF offload is active, iv) add more fully featured relocation
support to JIT, v) add support for signed compare instructions to
the nfp JIT, vi) export and reuse verfier log routine for nfp, and
many more, from Jakub, Quentin and Nic.
2) Fix a syzkaller reported GPF in BPF's copy_verifier_state() when
we hit kmalloc failure path, from Alexei.
3) Add two follow-up fixes for the recent XDP RXQ series: i) kvzalloc()
allocated memory was only kfree()'ed, and ii) fix a memory leak where
RX queue was not freed in netif_free_rx_queues(), from Jakub.
4) Add a sample for transferring XDP meta data into the skb, here it
is used for setting skb->mark with the buffer from XDP, from Jesper.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Immediate flag has been used to disable per-task consistency and patch
all tasks immediately. It could be useful if the patch doesn't change any
function or data semantics.
However, it causes problems on its own. The consistency problem is
currently broken with respect to immediate patches.
func a
patches 1i
2i
3
When the patch 3 is applied, only 2i function is checked (by stack
checking facility). There might be a task sleeping in 1i though. Such
task is migrated to 3, because we do not check 1i in
klp_check_stack_func() at all.
Coming atomic replace feature would be easier to implement and more
reliable without immediate.
Thus, remove immediate feature completely and save us from the problems.
Note that force feature has the similar problem. However it is
considered as a last resort. If used, administrator should not apply any
new live patches and should plan for reboot into an updated kernel.
The architectures would now need to provide HAVE_RELIABLE_STACKTRACE to
fully support livepatch.
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There are two other values for SET MAX feature field according to ata
protocol. So definite them.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently the virtual "clk_flags" file in debugfs shows the numeric
value of the top-level framework flags for the specified clock.
Hence the user must manually interpret these values.
Moreover, on big-endian 64-bit systems, the wrong half of the value is
shown, due to the cast from "unsigned long *" to "u32 *".
Fix both issues by showing the symbolic flag names instead.
Any non-standard flags are shown as a hex number.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Fixes: fc72d1d54d ("tuntap: XDP transmission")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit e817f85652 ("xdp: generic XDP handling of xdp_rxq_info")
removed some ifdef CONFIG_SYSFS in net/core/dev.c, but forgot to
remove the corresponding ifdef's in include/linux/netdevice.h.
Fixes: e817f85652 ("xdp: generic XDP handling of xdp_rxq_info")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the arguments net_dim() by formatting them into a struct
net_dim_sample before calling the function.
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Suggested-by: Tal Gilboa <talgi@mellanox.com>
Acked-by: Tal Gilboa <talgi@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This move allows drivers to add private structure elements to track the
number of packets, bytes, and interrupts events per ring. A driver
also defines a workqueue handler to act on this collected data once per
poll and modify the coalescing parameters per ring.
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Acked-by: Tal Gilboa <talgi@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Four patches from Or that add Hairpin support to mlx5:
===========================================================
From: Or Gerlitz <ogerlitz@mellanox.com>
We refer the ability of NIC HW to fwd packet received on one port to
the other port (also from a port to itself) as hairpin. The application API
is based
on ingress tc/flower rules set on the NIC with the mirred redirect
action. Other actions can apply to packets during the redirect.
Hairpin allows to offload the data-path of various SW DDoS gateways,
load-balancers, etc to HW. Packets go through all the required
processing in HW (header re-write, encap/decap, push/pop vlan) and
then forwarded, CPU stays at practically zero usage. HW Flow counters
are used by the control plane for monitoring and accounting.
Hairpin is implemented by pairing a receive queue (RQ) to send queue (SQ).
All the flows that share <recv NIC, mirred NIC> are redirected through
the same hairpin pair. Currently, only header-rewrite is supported as a
packet modification action.
I'd like to thanks Elijah Shakkour <elijahs@mellanox.com> for implementing this
functionality
on HW simulator, before it was avail in the FW so the driver code could be
tested early.
===========================================================
From Feras three patches that provide very small changes that allow IPoIB
to support RX timestamping for child interfaces, simply by hooking the mlx5e
timestamping PTP ioctl to IPoIB child interface netdev profile.
One patch from Gal to fix a spilling mistake.
Two patches from Eugenia adds drop counters to VF statistics
to be reported as part of VF statistics in netlink (iproute2) and
implemented them in mlx5 eswitch.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJaVF5WAAoJEEg/ir3gV/o+fRkH/0PxjwJRA3REqhi/H8HOdH9f
cBLrOzFdqTCYQWQFCLFbMQ/Zgoel3KglpJ0iQMjuVFfjMbybVXOe8FAEVdbWHnfL
C+2HRMe8dplKrsq5UkxJhbyKhFKhl2XeMFYWonw9dSM7Nz5DyowQ1y1r5SgMlMAv
t3mYAIa4kZHK18BjDoIsCoAXXwsHiztR2irMp5+DwataTGP7vC7AsrucDxLA/qFf
I3E15DZk9s1f53PUuY7CYnUnJfMMP3VJdxpyx4k6xt9J2IMuilF4YyD6wpAKsVQU
/LzRkWI9x/6QindffqlrACeeidimOeY4pC4txIhS5uXgFXulugDHq1/Ih1sgZS8=
=g5vr
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2018-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
mlx5-updates-2018-01-08
Four patches from Or that add Hairpin support to mlx5:
===========================================================
From: Or Gerlitz <ogerlitz@mellanox.com>
We refer the ability of NIC HW to fwd packet received on one port to
the other port (also from a port to itself) as hairpin. The application API
is based
on ingress tc/flower rules set on the NIC with the mirred redirect
action. Other actions can apply to packets during the redirect.
Hairpin allows to offload the data-path of various SW DDoS gateways,
load-balancers, etc to HW. Packets go through all the required
processing in HW (header re-write, encap/decap, push/pop vlan) and
then forwarded, CPU stays at practically zero usage. HW Flow counters
are used by the control plane for monitoring and accounting.
Hairpin is implemented by pairing a receive queue (RQ) to send queue (SQ).
All the flows that share <recv NIC, mirred NIC> are redirected through
the same hairpin pair. Currently, only header-rewrite is supported as a
packet modification action.
I'd like to thanks Elijah Shakkour <elijahs@mellanox.com> for implementing this
functionality
on HW simulator, before it was avail in the FW so the driver code could be
tested early.
===========================================================
From Feras three patches that provide very small changes that allow IPoIB
to support RX timestamping for child interfaces, simply by hooking the mlx5e
timestamping PTP ioctl to IPoIB child interface netdev profile.
One patch from Gal to fix a spilling mistake.
Two patches from Eugenia adds drop counters to VF statistics
to be reported as part of VF statistics in netlink (iproute2) and
implemented them in mlx5 eswitch.
Signed-off-by: David S. Miller <davem@davemloft.net>
Move completion related items (like the call single data) near the
end of the struct, instead of mixing them in with the initial
queueing related fields.
Move queuelist below the bio structures. Then we have all
queueing related bits in the first cache line.
This yields a 1.5-2% increase in IOPS for a null_blk test, both for
sync and for high thread count access. Sync test goes form 975K to
992K, 32-thread case from 20.8M to 21.2M IOPS.
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We only have one atomic flag left. Instead of using an entire
unsigned long for that, steal the bottom bit of the deadline
field that we already reserved.
Remove ->atomic_flags, since it's now unused.
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We reduce the resolution of request expiry, but since we're already
using jiffies for this where resolution depends on the kernel
configuration and since the timeout resolution is coarse anyway,
that should be fine.
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't need this to be an atomic flag, it can be a regular
flag. We either end up on the same CPU for the polling, in which
case the state is sane, or we did the sleep which would imply
the needed barrier to ensure we see the right state.
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch provides a common decoder for block status path related errors
that may be retried so various entities wishing to consult this do not
have to duplicate this decision.
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Daniel Borkmann says:
====================
pull-request: bpf 2018-01-09
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Prevent out-of-bounds speculation in BPF maps by masking the
index after bounds checks in order to fix spectre v1, and
add an option BPF_JIT_ALWAYS_ON into Kconfig that allows for
removing the BPF interpreter from the kernel in favor of
JIT-only mode to make spectre v2 harder, from Alexei.
2) Remove false sharing of map refcount with max_entries which
was used in spectre v1, from Daniel.
3) Add a missing NULL psock check in sockmap in order to fix
a race, from John.
4) Fix test_align BPF selftest case since a recent change in
verifier rejects the bit-wise arithmetic on pointers
earlier but test_align update was missing, from Alexei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
And unlike the other helpers we don't require a <asm/dma-direct.h> as
this helper is a special case for ia64 only, and this keeps it as
simple as possible.
Signed-off-by: Christoph Hellwig <hch@lst.de>
phys_to_dma, dma_to_phys and dma_capable are helpers published by
architecture code for use of swiotlb and xen-swiotlb only. Drivers are
not supposed to use these directly, but use the DMA API instead.
Move these to a new asm/dma-direct.h helper, included by a
linux/dma-direct.h wrapper that provides the default linear mapping
unless the architecture wants to override it.
In the MIPS case the existing dma-coherent.h is reused for now as
untangling it will take a bit of work.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Robin Murphy <robin.murphy@arm.com>
This makes sure the generic version can be used with architectures /
devices that have a DMA offset in the direct mapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Some pinctrl drivers can use the gpiochip irq valid information
to figure out if certain gpios are exposed to the kernel for
usage or not. Expose this API so we can use it in the
pinmux_ops::request ops.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Rename the BPF verifier `verbose()` to `bpf_verifier_log_write()` and
export it, so that other components (in particular, drivers for BPF
offload) can reuse the user buffer log to dump error messages at
verification time.
Renaming `verbose()` was necessary in order to avoid a name so generic
to be exported to the global namespace. However to prevent too much pain
for backports, the calls to `verbose()` in the kernel BPF verifier were
not changed. Instead, use function aliasing to make `verbose` point to
`bpf_verifier_log_write`. Another solution could consist in making a
wrapper around `verbose()`, but since it is a variadic function, I don't
see a clean way without creating two identical wrappers, one for the
verifier and one to export.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds the possibility of getting the delivery of a SIGXCPU
signal whenever there is a runtime overrun. The request is done through
the sched_flags field within the sched_attr structure.
Forward port of https://lkml.org/lkml/2009/10/16/170
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
Signed-off-by: Luca Abeni <luca.abeni@santannapisa.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it>
Link: http://lkml.kernel.org/r/1513077024-25461-1-git-send-email-claudio@evidence.eu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add iio consumer API to set buffer size and watermark according
to sysfs API.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This code offers a way to handle PDM audio microphones in
ASOC framework. Audio driver should use consumer API.
A specific management is implemented for DMA, with a
callback, to allows to handle audio buffers efficiently.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Extend the inkern API with functions for reading and writing
attribute of iio channels.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add devm_iio_hw_consumer_alloc function that calls iio_hw_consumer_free
when the device is unbound from the bus.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Hardware consumer interface can be used when one IIO device has
a direct connection to another device in hardware.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Sphinx emits various (26) warnings when building make target 'htmldocs'.
Currently struct definitions contain duplicate documentation, some as
kernel-docs and some as standard c89 comments. We can reduce
duplication while cleaning up the kernel docs.
Move all kernel-docs to right above each struct member. Use the set of
all existing comments (kernel-doc and c89). Add documentation for
missing struct members and function arguments.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Since pm_mutex is not exported using lock/unlock_system_sleep() from
inside a kernel module causes a "pm_mutex undefined" linker error.
Hence move lock/unlock_system_sleep() into kernel/power/main.c and
export these.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Sometimes the user wants to have device name of the match rather than
just checking if device present or not. To make life easier for such
users introduce acpi_dev_get_first_match_name() helper based on code
for acpi_dev_present().
For example, GPIO driver for Intel Merrifield needs to know the device
name of pin control to be able to apply GPIO mapping table to the proper
device.
To be more consistent with the purpose rename
struct acpi_dev_present_info -> struct acpi_dev_match_info
acpi_dev_present_cb() -> acpi_dev_match_cb()
in the utils.c file.
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Construct the init thread stack in the linker script rather than doing it
by means of a union so that ia64's init_task.c can be got rid of.
The following symbols are then made available from INIT_TASK_DATA() linker
script macro:
init_thread_union
init_stack
INIT_TASK_DATA() also expands the region to THREAD_SIZE to accommodate the
size of the init stack. init_thread_union is given its own section so that
it can be placed into the stack space in the right order. I'm assuming
that the ia64 ordering is correct and that the task_struct is first and the
thread_info second.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Will Deacon <will.deacon@arm.com> (arm64)
Tested-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
