Files created by truncate(1) have a size but no blocks, so
they can be allowed to enable compression.
Signed-off-by: Chao Liu <liuchao@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When converting inode to compressed one via ioctl, it needs to check
inline_data, since inline_data flag and compressed flag are incompatible.
Fixes: 4c8ff7095b ("f2fs: support data compression")
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_copy_page() is a wrapper around two kmap() + one memcpy() from/to
the mapped pages. It unnecessarily duplicates a kernel API and it makes
use of kmap(), which is being deprecated in favor of kmap_local_page().
Two main problems with kmap(): (1) It comes with an overhead as mapping
space is restricted and protected by a global lock for synchronization and
(2) it also requires global TLB invalidation when the kmap’s pool wraps
and it might block when the mapping space is fully utilized until a slot
becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Therefore, its
use in __clone_blkaddrs() is safe and should be preferred.
Delete f2fs_copy_page() and use a plain memcpy_page() in the only one
site calling the removed function. memcpy_page() avoids open coding two
kmap_local_page() + one memcpy() between the two kernel virtual addresses.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Quoted from commit e3b49ea368 ("f2fs: invalidate META_MAPPING before
IPU/DIO write")
"
Encrypted pages during GC are read and cached in META_MAPPING.
However, due to cached pages in META_MAPPING, there is an issue where
newly written pages are lost by IPU or DIO writes.
Thread A - f2fs_gc() Thread B
/* phase 3 */
down_write(i_gc_rwsem)
ra_data_block() ---- (a)
up_write(i_gc_rwsem)
f2fs_direct_IO() :
- down_read(i_gc_rwsem)
- __blockdev_direct_io()
- get_data_block_dio_write()
- f2fs_dio_submit_bio() ---- (b)
- up_read(i_gc_rwsem)
/* phase 4 */
down_write(i_gc_rwsem)
move_data_block() ---- (c)
up_write(i_gc_rwsem)
(a) In phase 3 of f2fs_gc(), up-to-date page is read from storage and
cached in META_MAPPING.
(b) In thread B, writing new data by IPU or DIO write on same blkaddr as
read in (a). cached page in META_MAPPING become out-dated.
(c) In phase 4 of f2fs_gc(), out-dated page in META_MAPPING is copied to
new blkaddr. In conclusion, the newly written data in (b) is lost.
To address this issue, invalidating pages in META_MAPPING before IPU or
DIO write.
"
In previous commit, we missed to cover extent cache hit case, and passed
wrong value for parameter @end of invalidate_mapping_pages(), fix both
issues.
Fixes: 6aa58d8ad2 ("f2fs: readahead encrypted block during GC")
Fixes: e3b49ea368 ("f2fs: invalidate META_MAPPING before IPU/DIO write")
Cc: Hyeong-Jun Kim <hj514.kim@samsung.com>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a sysfs entry showing the unusable space in a section
made by zone capacity.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes counting unusable blocks set by zone capacity when
checking the valid block count in a section.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In order to simplify the complicated per-zone capacity, let's support
only one capacity for entire zoned device.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Remove the redundant code and use local variant as the
argument directly. Make it more human-readable.
Signed-off-by: duguowei <duguowei@xiaomi.com>
[Jaegeuk Kim: make code neat]
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Introduce memory mode to supports "normal" and "low" memory modes.
"low" mode is to support low memory devices. Because of the nature of
low memory devices, in this mode, f2fs will try to save memory sometimes
by sacrificing performance. "normal" mode is the default mode and same
as before.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Last set of ARM fixes for 5.19:
- fix for MAX_DMA_ADDRESS overflow
- fix for find_*_bit performing an out of bounds memory access
-----BEGIN PGP SIGNATURE-----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=7ieJ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"Last set of ARM fixes for 5.19:
- fix for MAX_DMA_ADDRESS overflow
- fix for find_*_bit performing an out of bounds memory access"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: findbit: fix overflowing offset
ARM: 9216/1: Fix MAX_DMA_ADDRESS overflow
The Multicolor PWM LED uses max-brigthness property (in the example and
in the driver), so document it to fixi dt_binding_check warning like:
leds/leds-pwm-multicolor.example.dtb:
led-controller: multi-led: Unevaluated properties are not allowed ('max-brightness' was unexpected)
Reported-by: Rob Herring <robh@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
The driver core supports the ability to handle the creation and removal
of device-specific sysfs files in a race-free manner. Take advantage of
that by converting this driver to use this by moving the sysfs
attributes into a group and assigning the dev_groups pointer to it.
Cc: Pavel Machek <pavel@ucw.cz>
Cc: linux-leds@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Sample reactor that panics the system when an exception is found. This
is useful both to capture a vmcore, or to fail-safe a critical system.
Link: https://lkml.kernel.org/r/729aae3aba95f35738b8f8180e626d747d1d9da2.1659052063.git.bristot@kernel.org
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Per task wakeup while not running (wwnr) monitor.
This model is broken, the reason is that a task can be running in the
processor without being set as RUNNABLE. Think about a task about to
sleep:
1: set_current_state(TASK_UNINTERRUPTIBLE);
2: schedule();
And then imagine an IRQ happening in between the lines one and two,
waking the task up. BOOM, the wakeup will happen while the task is
running.
Q: Why do we need this model, so?
A: To test the reactors.
Link: https://lkml.kernel.org/r/473c0fc39967250fdebcff8b620311c11dccad30.1659052063.git.bristot@kernel.org
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The wakeup in preemptive (wip) monitor verifies if the
wakeup events always take place with preemption disabled:
|
|
v
#==================#
H preemptive H <+
#==================# |
| |
| preempt_disable | preempt_enable
v |
sched_waking +------------------+ |
+--------------- | | |
| | non_preemptive | |
+--------------> | | -+
+------------------+
The wakeup event always takes place with preemption disabled because
of the scheduler synchronization. However, because the preempt_count
and its trace event are not atomic with regard to interrupts, some
inconsistencies might happen.
The documentation illustrates one of these cases.
Link: https://lkml.kernel.org/r/c98ca678df81115fddc04921b3c79720c836b18f.1659052063.git.bristot@kernel.org
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
THIS CODE IS NOT LINKED TO THE MAKEFILE.
This model does not compile because it lacks the instrumentation
part, which will be added next. In the typical case, there will be
only one patch, but it was split into two patches for educational
purposes.
This is the direct output this command line:
$ dot2k -d tools/verification/models/wip.dot -t per_cpu
Link: https://lkml.kernel.org/r/5eb7a9118917e8a814c5e49853a72fc62be0a101.1659052063.git.bristot@kernel.org
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
dot2c is a tool that transforms an automata in the graphiviz .dot file
into an C representation of the automata.
usage: dot2c [-h] dot_file
dot2c: converts a .dot file into a C structure
positional arguments:
dot_file The dot file to be converted
optional arguments:
-h, --help show this help message and exit
Link: https://lkml.kernel.org/r/b26204ba9509c80bcda31b76cdea31ddb188cd24.1659052063.git.bristot@kernel.org
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add the runtime-verification.rst document, explaining the basics of RV
and how to use the interface.
Link: https://lkml.kernel.org/r/4be7d1a88ab1e2eb0767521e1ab52a149a154bc4.1659052063.git.bristot@kernel.org
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In Linux terms, the runtime verification monitors are encapsulated
inside the "RV monitor" abstraction. The "RV monitor" includes a set
of instances of the monitor (per-cpu monitor, per-task monitor, and
so on), the helper functions that glue the monitor to the system
reference model, and the trace output as a reaction for event parsing
and exceptions, as depicted below:
Linux +----- RV Monitor ----------------------------------+ Formal
Realm | | Realm
+-------------------+ +----------------+ +-----------------+
| Linux kernel | | Monitor | | Reference |
| Tracing | -> | Instance(s) | <- | Model |
| (instrumentation) | | (verification) | | (specification) |
+-------------------+ +----------------+ +-----------------+
| | |
| V |
| +----------+ |
| | Reaction | |
| +--+--+--+-+ |
| | | | |
| | | +-> trace output ? |
+------------------------|--|----------------------+
| +----> panic ?
+-------> <user-specified>
Add the rv/da_monitor.h, enabling automatic code generation for the
*Monitor Instance(s)* using C macros, and code to support it.
The benefits of the usage of macro for monitor synthesis are 3-fold as it:
- Reduces the code duplication;
- Facilitates the bug fix/improvement;
- Avoids the case of developers changing the core of the monitor code
to manipulate the model in a (let's say) non-standard way.
This initial implementation presents three different types of monitor
instances:
- DECLARE_DA_MON_GLOBAL(name, type)
- DECLARE_DA_MON_PER_CPU(name, type)
- DECLARE_DA_MON_PER_TASK(name, type)
The first declares the functions for a global deterministic automata monitor,
the second for monitors with per-cpu instances, and the third with per-task
instances.
Link: https://lkml.kernel.org/r/51b0bf425a281e226dfeba7401d2115d6091f84e.1659052063.git.bristot@kernel.org
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Formally, a deterministic automaton, denoted by G, is defined as a
quintuple:
G = { X, E, f, x_0, X_m }
where:
- X is the set of states;
- E is the finite set of events;
- x_0 is the initial state;
- X_m (subset of X) is the set of marked states.
- f : X x E -> X $ is the transition function. It defines the
state transition in the occurrence of a event from E in
the state X. In the special case of deterministic automata,
the occurrence of the event in E in a state in X has a
deterministic next state from X.
An automaton can also be represented using a graphical format of
vertices (nodes) and edges. The open-source tool Graphviz can produce
this graphic format using the (textual) DOT language as the source code.
The dot2c tool presented in this paper:
De Oliveira, Daniel Bristot; Cucinotta, Tommaso; De Oliveira, Romulo
Silva. Efficient formal verification for the Linux kernel. In:
International Conference on Software Engineering and Formal Methods.
Springer, Cham, 2019. p. 315-332.
Translates a deterministic automaton in the DOT format into a C
source code representation that to be used for monitoring.
This header file implements helper functions to facilitate the usage
of the C output from dot2c/k for monitoring.
Link: https://lkml.kernel.org/r/563234f2bfa84b540f60cf9e39c2d9f0eea95a55.1659052063.git.bristot@kernel.org
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
A runtime monitor can cause a reaction to the detection of an
exception on the model's execution. By default, the monitors have
tracing reactions, printing the monitor output via tracepoints.
But other reactions can be added (on-demand) via this interface.
The user interface resembles the kernel tracing interface and
presents these files:
"available_reactors"
- Reading shows the available reactors, one per line.
For example:
# cat available_reactors
nop
panic
printk
"reacting_on"
- It is an on/off general switch for reactors, disabling
all reactions.
"monitors/MONITOR/reactors"
- List available reactors, with the select reaction for the given
MONITOR inside []. The default one is the nop (no operation)
reactor.
- Writing the name of a reactor enables it to the given
MONITOR.
For example:
# cat monitors/wip/reactors
[nop]
panic
printk
# echo panic > monitors/wip/reactors
# cat monitors/wip/reactors
nop
[panic]
printk
Link: https://lkml.kernel.org/r/1794eb994637457bdeaa6bad0b8263d2f7eece0c.1659052063.git.bristot@kernel.org
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
RV is a lightweight (yet rigorous) method that complements classical
exhaustive verification techniques (such as model checking and
theorem proving) with a more practical approach to complex systems.
RV works by analyzing the trace of the system's actual execution,
comparing it against a formal specification of the system behavior.
RV can give precise information on the runtime behavior of the
monitored system while enabling the reaction for unexpected
events, avoiding, for example, the propagation of a failure on
safety-critical systems.
The development of this interface roots in the development of the
paper:
De Oliveira, Daniel Bristot; Cucinotta, Tommaso; De Oliveira, Romulo
Silva. Efficient formal verification for the Linux kernel. In:
International Conference on Software Engineering and Formal Methods.
Springer, Cham, 2019. p. 315-332.
And:
De Oliveira, Daniel Bristot. Automata-based formal analysis
and verification of the real-time Linux kernel. PhD Thesis, 2020.
The RV interface resembles the tracing/ interface on purpose. The current
path for the RV interface is /sys/kernel/tracing/rv/.
It presents these files:
"available_monitors"
- List the available monitors, one per line.
For example:
# cat available_monitors
wip
wwnr
"enabled_monitors"
- Lists the enabled monitors, one per line;
- Writing to it enables a given monitor;
- Writing a monitor name with a '!' prefix disables it;
- Truncating the file disables all enabled monitors.
For example:
# cat enabled_monitors
# echo wip > enabled_monitors
# echo wwnr >> enabled_monitors
# cat enabled_monitors
wip
wwnr
# echo '!wip' >> enabled_monitors
# cat enabled_monitors
wwnr
# echo > enabled_monitors
# cat enabled_monitors
#
Note that more than one monitor can be enabled concurrently.
"monitoring_on"
- It is an on/off general switcher for monitoring. Note
that it does not disable enabled monitors or detach events,
but stop the per-entity monitors of monitoring the events
received from the system. It resembles the "tracing_on" switcher.
"monitors/"
Each monitor will have its one directory inside "monitors/". There
the monitor specific files will be presented.
The "monitors/" directory resembles the "events" directory on
tracefs.
For example:
# cd monitors/wip/
# ls
desc enable
# cat desc
wakeup in preemptive per-cpu testing monitor.
# cat enable
0
For further information, see the comments in the header of
kernel/trace/rv/rv.c from this patch.
Link: https://lkml.kernel.org/r/a4bfe038f50cb047bfb343ad0e12b0e646ab308b.1659052063.git.bristot@kernel.org
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When a ftrace_bug happens (where ftrace fails to modify a location) it is
helpful to have what was at that location as well as what was expected to
be there.
But with the conversion to text_poke() the variable that assigns the
expected for debugging was dropped. Unfortunately, I noticed this when I
needed it. Add it back.
Link: https://lkml.kernel.org/r/20220726101851.069d2e70@gandalf.local.home
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Fixes: 768ae4406a ("x86/ftrace: Use text_poke()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If an instance of tracing enables the same trace event as another
instance, or the top level instance, or even perf, then the va_list passed
into some tracepoints can be used more than once.
As va_list can only be traversed once, this can cause issues:
# cat /sys/kernel/tracing/instances/qla2xxx/trace
cat-56106 [012] ..... 2419873.470098: ql_dbg_log: qla2xxx [0000:05:00.0]-1054:14: Entered (null).
cat-56106 [012] ..... 2419873.470101: ql_dbg_log: qla2xxx [0000:05:00.0]-1000:14: Entered ×+<96>²Ü<98>^H.
cat-56106 [012] ..... 2419873.470102: ql_dbg_log: qla2xxx [0000:05:00.0]-1006:14: Prepare to issue mbox cmd=0xde589000.
# cat /sys/kernel/tracing/trace
cat-56106 [012] ..... 2419873.470097: ql_dbg_log: qla2xxx [0000:05:00.0]-1054:14: Entered qla2x00_get_firmware_state.
cat-56106 [012] ..... 2419873.470100: ql_dbg_log: qla2xxx [0000:05:00.0]-1000:14: Entered qla2x00_mailbox_command.
cat-56106 [012] ..... 2419873.470102: ql_dbg_log: qla2xxx [0000:05:00.0]-1006:14: Prepare to issue mbox cmd=0x69.
The instance version is corrupted because the top level instance iterated
the va_list first.
Use va_copy() in the __assign_vstr() macro to make sure that each trace
event for each use case gets a fresh va_list.
Link: https://lore.kernel.org/all/259d53a5-958e-6508-4e45-74dba2821242@marvell.com/
Link: https://lkml.kernel.org/r/20220719182004.21daa83e@gandalf.local.home
Fixes: 0563231f93 ("tracing/events: Add __vstring() and __assign_vstr() helper macros")
Reported-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Instead of open coding a __dynamic_array() with a fixed length (which
defeats the purpose of the dynamic array in the first place). Use the new
__vstring() helper that will use a va_list and only write enough of the
string into the ring buffer that is needed.
Link: https://lkml.kernel.org/r/20220724191650.236b1355@rorschach.local.home
Cc: Marek Lindner <mareklindner@neomailbox.ch>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Cc: Antonio Quartulli <a@unstable.cc>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: b.a.t.m.a.n@lists.open-mesh.org
Cc: netdev@vger.kernel.org
Acked-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Factor out the common prerequisites for DT compilation into the new
target, dtbs_prepare.
Add comments to explain why include/config/kernel.release is the
prerequisite. Our policy is that installation targets must not rebuild
anything in the tree. If 'make modules_install' is executed as root,
include/config/kernel.release may be owned by root.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The byte at offset 6 represents length. Don't take it and drop it
immediately by using proper accessor, i.e. get_unaligned_be24().
[JD: Change the subject to something less frightening]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
This reverts commit e98b461bb0.
We actually have been using the CONFIG_CAVIUM_RESERVE32 and previous patch
defined it in the corresponding Kconfig.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This options is used to reserve a shared memory region for user processes
to use for hardware memory buffers. The actual code to support the option
comes in the following patch.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
With commit d257cc8cb8 ("locking/rwsem: Make handoff bit handling more
consistent"), the writer that sets the handoff bit can be interrupted
out without clearing the bit if the wait queue isn't empty. This disables
reader and writer optimistic lock spinning and stealing.
Now if a non-first writer in the queue is somehow woken up or a new
waiter enters the slowpath, it can't acquire the lock. This is not the
case before commit d257cc8cb8 as the writer that set the handoff bit
will clear it when exiting out via the out_nolock path. This is less
efficient as the busy rwsem stays in an unlock state for a longer time.
In some cases, this new behavior may cause lockups as shown in [1] and
[2].
This patch allows a non-first writer to ignore the handoff bit if it
is not originally set or initiated by the first waiter. This patch is
shown to be effective in fixing the lockup problem reported in [1].
[1] https://lore.kernel.org/lkml/20220617134325.GC30825@techsingularity.net/
[2] https://lore.kernel.org/lkml/3f02975c-1a9d-be20-32cf-f1d8e3dfafcc@oracle.com/
Fixes: d257cc8cb8 ("locking/rwsem: Make handoff bit handling more consistent")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Tested-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20220622200419.778799-1-longman@redhat.com
Rearrange kernel-doc notation for 2 functions to eliminate
kernel-doc warnings. Use Return: notation for the function
return value description. Add function short descriptions
for both functions.
Correct 2 typos.
Fixes these kernel-doc warnings:
msi-octeon.c:49: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Called when a driver request MSI interrupts instead of the
msi-octeon.c:49: warning: missing initial short description on line:
* Called when a driver request MSI interrupts instead of the
msi-octeon.c:62: warning: No description found for return value of 'arch_setup_msi_irq'
msi-octeon.c:189: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Called when a device no longer needs its MSI interrupts. All
msi-octeon.c:189: warning: missing initial short description on line:
* Called when a device no longer needs its MSI interrupts. All
Fixes: e8635b484f ("MIPS: Add Cavium OCTEON PCI support.")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Aditya Srivastava <yashsri421@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fix the typo `s/that that/than that/' in line 72.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The VERBOSE option in Makefile has been moved, but there still have the
description left in README. For now, we use `-v` options when running
memblock test to print information, so using the new to replace the
obsolete items.
Signed-off-by: Shaoqin Huang <shaoqin.huang@intel.com>
Acked-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/20220729161125.190845-1-shaoqin.huang@intel.com
The Lenovo Yoga 9 14IAP7 is set up similarly to the Thinkpad X1 7th and
8th Gen. It also has the speakers attached to NID 0x14 and the bass
speakers to NID 0x17, but here the codec misreports the NID 0x17 as
unconnected.
The pincfg and hda verbs connect and activate the bass speaker
amplifiers, but the generic driver will connect them to NID 0x06 which
has no volume control. Set connection list/preferred connections is
required to gain volume control.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208555
Signed-off-by: Philipp Jungkamp <p.jungkamp@gmx.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220729162103.6062-1-p.jungkamp@gmx.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Misc updates to mlx5 driver:
1) Gal corrects to use skb_tcp_all_headers on encapsulated skbs.
2) Roi Adds the support for offloading standalone police actions.
3) lama, did some refactoring to minimize code coupling with
mlx5e_priv "god object" in some of the follows, and converts some of the
objects to pointers to preserve on memory when these objects aren't needed.
This is part one of two parts series.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmLi98IACgkQSD+KveBX
+j7Sxwf9ER9/fJiQQBfcBiqO0NZvhnbJ9XXPAsTOCJIU255+AcFMoHLmR3HY6yZY
kH/3Va4AON7cH9hc71baGIGYJKi8aPwrLgiPPiWjnJ/0cHfLDihtxmV6Z+7VHEzN
v53L9DjPqEVrH/TLzz05RwGCPrxNDJFzRIwQ84sT74ESXvuRjN1zCzgdOQGdoTGf
770kp9J1qSQyAjgtV5JtjDg3BMlTJhWcZKFpidQ/1qaKR33sj8ncuIYVG0hlN38b
Y0B2kJtBrKsrlUWtM89kQx54QHgAjF3aI83Pls0peLVuzrcJIMkKgKyw2AYcCuSw
9exjRG3R4zaWbbOvgolej4/sm59rIA==
=VDrF
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2022-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2022-07-28
Misc updates to mlx5 driver:
1) Gal corrects to use skb_tcp_all_headers on encapsulated skbs.
2) Roi Adds the support for offloading standalone police actions.
3) lama, did some refactoring to minimize code coupling with
mlx5e_priv "god object" in some of the follows, and converts some of the
objects to pointers to preserve on memory when these objects aren't needed.
This is part one of two parts series.
* tag 'mlx5-updates-2022-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Move mlx5e_init_l2_addr to en_main
net/mlx5e: Split en_fs ndo's and move to en_main
net/mlx5e: Separate mlx5e_set_rx_mode_work and move caller to en_main
net/mlx5e: Add mdev to flow_steering struct
net/mlx5e: Report flow steering errors with mdev err report API
net/mlx5e: Convert mlx5e_flow_steering member of mlx5e_priv to pointer
net/mlx5e: Allocate VLAN and TC for featured profiles only
net/mlx5e: Make mlx5e_tc_table private
net/mlx5e: Convert mlx5e_tc_table member of mlx5e_flow_steering to pointer
net/mlx5e: TC, Support tc action api for police
net/mlx5e: TC, Separate get/update/replace meter functions
net/mlx5e: Add red and green counters for metering
net/mlx5e: TC, Allocate post meter ft per rule
net/mlx5: DR, Add support for flow metering ASO
net/mlx5e: Fix wrong use of skb_tcp_all_headers() with encapsulation
====================
Link: https://lore.kernel.org/r/20220728205728.143074-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__d_add() and __d_move() wake up waiters on dentry::d_wait from within
the i_seq_dir write held region. This violates the PREEMPT_RT
constraints as the wake up acquires wait_queue_head::lock which is a
"sleeping" spinlock on RT.
There is no requirement to do so. __d_lookup_unhash() has cleared
DCACHE_PAR_LOOKUP and dentry::d_wait and returned the now unreachable wait
queue head pointer to the caller, so the actual wake up can be postponed
until the i_dir_seq write side critical section is left. The only
requirement is that dentry::lock is held across the whole sequence
including the wake up. The previous commit includes an analysis why this
is considered safe.
Move the wake up past end_dir_add() which leaves the i_dir_seq write side
critical section and enables preemption.
For non RT kernels there is no difference because preemption is still
disabled due to dentry::lock being held, but it shortens the time between
wake up and unlocking dentry::lock, which reduces the contention for the
woken up waiter.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
__d_lookup_done() wakes waiters on dentry->d_wait. On PREEMPT_RT we are
not allowed to do that with preemption disabled, since the wakeup
acquired wait_queue_head::lock, which is a "sleeping" spinlock on RT.
Calling it under dentry->d_lock is not a problem, since that is also a
"sleeping" spinlock on the same configs. Unfortunately, two of its
callers (__d_add() and __d_move()) are holding more than just ->d_lock
and that needs to be dealt with.
The key observation is that wakeup can be moved to any point before
dropping ->d_lock.
As a first step to solve this, move the wake up outside of the
hlist_bl_lock() held section.
This is safe because:
Waiters get inserted into ->d_wait only after they'd taken ->d_lock
and observed DCACHE_PAR_LOOKUP in flags. As long as they are
woken up (and evicted from the queue) between the moment __d_lookup_done()
has removed DCACHE_PAR_LOOKUP and dropping ->d_lock, we are safe,
since the waitqueue ->d_wait points to won't get destroyed without
having __d_lookup_done(dentry) called (under ->d_lock).
->d_wait is set only by d_alloc_parallel() and only in case when
it returns a freshly allocated in-lookup dentry. Whenever that happens,
we are guaranteed that __d_lookup_done() will be called for resulting
dentry (under ->d_lock) before the wq in question gets destroyed.
With two exceptions wq lives in call frame of the caller of
d_alloc_parallel() and we have an explicit d_lookup_done() on the
resulting in-lookup dentry before we leave that frame.
One of those exceptions is nfs_call_unlink(), where wq is embedded into
(dynamically allocated) struct nfs_unlinkdata. It is destroyed in
nfs_async_unlink_release() after an explicit d_lookup_done() on the
dentry wq went into.
Remaining exception is d_add_ci(). There wq is what we'd found in
->d_wait of d_add_ci() argument. Callers of d_add_ci() are two
instances of ->d_lookup() and they must have been given an in-lookup
dentry. Which means that they'd been called by __lookup_slow() or
lookup_open(), with wq in the call frame of one of those.
Result of d_alloc_parallel() in d_add_ci() is fed to
d_splice_alias(), which either returns non-NULL (and d_add_ci() does
d_lookup_done()) or feeds dentry to __d_add() that will do
__d_lookup_done() under ->d_lock. That concludes the analysis.
Let __d_lookup_unhash():
1) Lock the lookup hash and clear DCACHE_PAR_LOOKUP
2) Unhash the dentry
3) Retrieve and clear dentry::d_wait
4) Unlock the hash and return the retrieved waitqueue head pointer
5) Let the caller handle the wake up.
6) Rename __d_lookup_done() to __d_lookup_unhash_wake() to enforce
build failures for OOT code that used __d_lookup_done() and is not
aware of the new return value.
This does not yet solve the PREEMPT_RT problem completely because
preemption is still disabled due to i_dir_seq being held for write. This
will be addressed in subsequent steps.
An alternative solution would be to switch the waitqueue to a simple
waitqueue, but aside of Linus not being a fan of them, moving the wake up
closer to the place where dentry::lock is unlocked reduces lock contention
time for the woken up waiter.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/20220613140712.77932-3-bigeasy@linutronix.de
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
i_dir_seq is a sequence counter with a lock which is represented by the
lowest bit. The writer atomically updates the counter which ensures that it
can be modified by only one writer at a time. This requires preemption to
be disabled across the write side critical section.
On !PREEMPT_RT kernels this is implicit by the caller acquiring
dentry::lock. On PREEMPT_RT kernels spin_lock() does not disable preemption
which means that a preempting writer or reader would live lock. It's
therefore required to disable preemption explicitly.
An alternative solution would be to replace i_dir_seq with a seqlock_t for
PREEMPT_RT, but that comes with its own set of problems due to arbitrary
lock nesting. A pure sequence count with an associated spinlock is not
possible because the locks held by the caller are not necessarily related.
As the critical section is small, disabling preemption is a sensible
solution.
Reported-by: Oleg.Karfich@wago.com
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/20220613140712.77932-2-bigeasy@linutronix.de
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All callers of d_alloc_parallel() must make sure that resulting
in-lookup dentry (if any) will encounter __d_lookup_done() before
the final dput(). d_add_ci() might end up creating in-lookup
dentries; they are fed to d_splice_alias(), which will normally
make sure they meet __d_lookup_done(). However, it is possible
to end up with d_splice_alias() failing with ERR_PTR(-ELOOP)
without having done so. It takes a corrupted ntfs or case-insensitive
xfs image, but neither should end up with memory corruption...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmLi9TwACgkQSD+KveBX
+j7CmQf/Xim+h2fA1pEYz/dThY6amiFnJyQ1ymvPq/QUQV8Sey+XGNZwl/zNXdIv
1Xu3QMkVfZRBUM8MJUQLWi6njKz7URHjicBEab0uqkc+kTrMK0sgG9Zot6TQNFkG
plI/SLPKe2z8D3I8CNMyGsQZ5vLSrHrlPlkHYOpiGNati37Ws1dxmvUXkZUzf7bc
9euPzM+2nOS5Hl8/l8Fjr2XUksPYjFZ7DYp7xcQ3kkyqD9/9KyUUbVd6AinSB7Ql
OUfbYmEU0xqc1Q+vQPyVzBhqzfapH92IlqqsEKpFIj7gJ8GqoQuyZG7OazMIKczD
HCE3+XtnlYh6b6OxN7sW/Fgt6v1QcQ==
=f/Pl
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2022-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-07-28
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2022-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Fix driver use of uninitialized timeout
net/mlx5: DR, Fix SMFS steering info dump format
net/mlx5: Adjust log_max_qp to be 18 at most
net/mlx5e: Modify slow path rules to go to slow fdb
net/mlx5e: Fix calculations related to max MPWQE size
net/mlx5e: xsk: Account for XSK RQ UMRs when calculating ICOSQ size
net/mlx5e: Fix the value of MLX5E_MAX_RQ_NUM_MTTS
net/mlx5e: TC, Fix post_act to not match on in_port metadata
net/mlx5e: Remove WARN_ON when trying to offload an unsupported TLS cipher/version
====================
Link: https://lore.kernel.org/r/20220728204640.139990-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2022-07-28
This series contains updates to ice driver only.
Michal allows for VF true promiscuous mode to be set for multiple VFs
and adds clearing of promiscuous filters when VF trust is removed.
Maciej refactors ice_set_features() to track/check changed features
instead of constantly checking against netdev features and adds support for
NETIF_F_LOOPBACK.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: allow toggling loopback mode via ndo_set_features callback
ice: compress branches in ice_set_features()
ice: Fix promiscuous mode not turning off
ice: Introduce enabling promiscuous mode on multiple VF's
====================
Link: https://lore.kernel.org/r/20220728195538.3391360-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree says:
====================
sfc: VF representors for EF100 - RX side
This series adds the receive path for EF100 VF representors, plus other
minor features such as statistics.
====================
Link: https://lore.kernel.org/r/cover.1659034549.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's not truly a ring, but the maximum length of the list of queued RX
SKBs is analogous to an RX ring size, so use that API to configure it.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
