MCP may signal driver about generic critical failure.
Driver has to collect mdump information (get_retain),
it pushes that to logs and triggers generic notification on
"hardware attention" event.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fan failure is sent by firmware, driver reacts on this error with
newly introduced notification path. It will collect dump and shut down
the device to prevent physical breakage
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Upon tx timeout detection we do disable carrier and print TX queue
info on TX timeout. We then raise hw error condition and trigger
service task to handle this.
This handler will capture extra debug info and then optionally
trigger recovery procedure to try restore function.
Signed-off-by: Denis Bolotin <dbolotin@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Driver has an ability to initiate a recovery process as a reaction to
detected errors. But the codepath (recovery_process) was disabled and
never active.
Here we add ethtool private flag to allow user have the recovery
procedure activated.
We still do not enable this by default though, since in some configurations
this is not desirable. E.g. this may impact other PFs/VFs.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On different hardware events we have to respond differently,
on some of hardware indications hw attention (error condition)
should be cleared by the driver to continue normal functioning.
Here we introduce attention clear flags, and put them on some
important events (in aeu_descs).
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thats probably a legacy code had double declaration of some fields.
Cleanup this, removing copy and fixing references.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On various critical errors, notification handler should also report
the err information into the management firmware.
MFW can interact with server/motherboard backend agents - these are
used by server manufacturers to monitor server HW health.
Thus, it is important for driver to report on any faulty conditions
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a number of critical places not only debug trace should be printed,
but the appropriate hw error condition should be raised and error
handling/recovery should start.
Introduce our new qed_hw_err_notify invocation in these places to
record and indicate critical error conditions in hardware.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qede (ethernet level driver) registers a callback handler.
This handler maintains eth dev state flags/bits to track error processing.
It implements in place processing part for nonsleeping context (WARN_ON
trigger), and a deferred (delayed work) part which triggers recovery
process for recoverable errors.
In later patches this atomic handler will come with more meat.
We introduce err_flags on ethdevice structure, its being used to record
error handling properties.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here we introduce qed device error tracking flags and error types.
qed_hw_err_notify is an entrace point to report errors.
It'll notify higher level drivers (qede/qedr/etc) to handle and recover
the error.
List of posible errors comes from hardware interfaces, but could be
extended in future.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix a couple of quite severe issues for the CQE request path
MMC host:
- alcor: Fix a resource leak in the error path for ->probe()
- sdhci-acpi: Fix the DMA support for the AMD eMMC v5.0 variant
- sdhci-pci-gli: Fix system resume support for GL975x
- sdhci-pci-gli: Fix reboot error for GL9750
-----BEGIN PGP SIGNATURE-----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=vjEL
-----END PGP SIGNATURE-----
Merge tag 'mmc-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix a couple of quite severe issues for the CQE request path
MMC host:
- alcor: Fix a resource leak in the error path for ->probe()
- sdhci-acpi: Fix the DMA support for the AMD eMMC v5.0 variant
- sdhci-pci-gli: Fix system resume support for GL975x
- sdhci-pci-gli: Fix reboot error for GL9750"
* tag 'mmc-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-acpi: Add SDHCI_QUIRK2_BROKEN_64_BIT_DMA for AMDI0040
mmc: block: Fix request completion in the CQE timeout path
mmc: core: Fix recursive locking issue in CQE recovery path
mmc: core: Check request type before completing the request
mmc: sdhci-pci-gli: Fix can not access GL9750 after reboot from Windows 10
mmc: alcor: Fix a resource leak in the error path for ->probe()
mmc: sdhci-pci-gli: Fix no irq handler from suspend
Huazhong Tan says:
====================
net: hns3: add some cleanups for -next
This patchset adds some cleanups for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The skb_has_frag_list() in hns3_nic_net_xmit() is redundant, since
skb_walk_frags() includes this checking implicitly.
Reported-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are some macros defined in hns3_enet.h, but not used in
anywhere.
Reported-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When handling HCLGE_MBX_GET_LINK_STATUS, PF will return the link
status to the VF, so the error log of hclge_get_link_info() is
incorrect.
Reported-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since hclge_get_cfg() already has error print, so hclge_configure()
should not print error when calling hclge_get_cfg() fail.
Reported-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch modifies some incorrect spelling.
Reported-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a MAC address was passed via the device tree node for the r8152
device, use it and fall back to reading from EEPROM otherwise. This is
useful for devices where the r8152 EEPROM was not programmed with a
valid MAC address, or if users want to explicitly set a MAC address in
the bootloader and pass that to the kernel.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix gcc-10 compilation warning in nf_conntrack, from Arnd Bergmann.
2) Add NF_FLOW_HW_PENDING to avoid races between stats and deletion
commands, from Paul Blakey.
3) Remove WQ_MEM_RECLAIM from the offload workqueue, from Roi Dayan.
4) Infinite loop when removing nf_conntrack module, from Florian Westphal.
5) Set NF_FLOW_TEARDOWN bit on expiration to avoid races when refreshing
the timeout from the software path.
6) Missing nft_set_elem_expired() check in the rbtree, from Phil Sutter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Complete adding of Karsten as maintainer for all S390 networking
parts in the kernel.
Cc: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the duplicate "mutex", and change "Motex" to "Mutex". Also I
recommend it's easier for understanding to make the "ready-interrupt"
a bundle for it is a parallel description as "shutdown" which is appended
after the slash.
Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com>
Cc: Alex Elder <elder@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We don't want to disconnect a session because of a stray PADT arriving
while the interface is in promiscuous mode.
Furthermore, multicast and broadcast packets make no sense here, so
only PACKET_HOST is accepted.
Reported-by: David Balažic <xerces9@gmail.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few fentry/fexit programs returning non-0.
The tests with these programs will break with the previous
patch which enfoced return-0 rules. Fix them properly.
Fixes: ac065870d9 ("selftests/bpf: Add BPF_PROG, BPF_KPROBE, and BPF_KRETPROBE macros")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200514053207.1298479-1-yhs@fb.com
Currently, tracing/fentry and tracing/fexit prog
return values are not enforced. In trampoline codes,
the fentry/fexit prog return values are ignored.
Let us enforce it to be 0 to avoid confusion and
allows potential future extension.
This patch also explicitly added return value
checking for tracing/raw_tp, tracing/fmod_ret,
and freplace programs such that these program
return values can be anything. The purpose are
two folds:
1. to make it explicit about return value expectations
for these programs in verifier.
2. for tracing prog_type, if a future attach type
is added, the default is -ENOTSUPP which will
enforce to specify return value ranges explicitly.
Fixes: fec56f5890 ("bpf: Introduce BPF trampoline")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200514053206.1298415-1-yhs@fb.com
Flower tests used to create ingress filter with specified parent qdisc
"parent ffff:" but dump them on "ingress". With recent commit that fixed
tcm_parent handling in dump those are not considered same parent anymore,
which causes iproute2 tc to emit additional "parent ffff:" in first line of
filter dump output. The change in output causes filter match in tests to
fail.
Prevent parent qdisc output when dumping filters in flower tests by always
correctly specifying "ingress" parent both when creating and dumping
filters.
Fixes: a7df4870d7 ("net_sched: fix tcm_parent in tc filter dump")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Driver missed initializing num_por which is one of the por values that
driver configures to hardware. In order to get these values, add a new
structure ethqos_emac_driver_data which holds por and num_por values
and populate that in driver probe.
Fixes: a7c30e62d4 ("net: stmmac: Add driver for Qualcomm ethqos")
Reported-by: Rahul Ankushrao Kawadgave <rahulak@qti.qualcomm.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
mmap() subsystem allows user-space application to memory-map region with
initial page offset. This wasn't taken into account in initial implementation
of BPF array memory-mapping. This would result in wrong pages, not taking into
account requested page shift, being memory-mmaped into user-space. This patch
fixes this gap and adds a test for such scenario.
Fixes: fc9702273e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200512235925.3817805-1-andriin@fb.com
GCC 10 is very strict about symbol clash, and lwt_len_hist_user contains
a symbol which clashes with libbpf:
/usr/bin/ld: samples/bpf/lwt_len_hist_user.o:(.bss+0x0): multiple definition of `bpf_log_buf'; samples/bpf/bpf_load.o:(.bss+0x8c0): first defined here
collect2: error: ld returned 1 exit status
bpf_log_buf here seems to be a leftover, so removing it.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200511113234.80722-1-mcroce@redhat.com
Merge misc fixes from Andrew Morton:
"7 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kasan: add missing functions declarations to kasan.h
kasan: consistently disable debugging features
ipc/util.c: sysvipc_find_ipc() incorrectly updates position index
userfaultfd: fix remap event with MREMAP_DONTUNMAP
mm/gup: fix fixup_user_fault() on multiple retries
epoll: call final ep_events_available() check under the lock
mm, memcg: fix inconsistent oom event behavior
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXrvi4AAKCRCRxhvAZXjc
otubAPsFV2XnZykq94GRZMBqxP3CQepTykXDV4aryfrUDoV04wD/fFisS/i+R4Uq
XvtMZzsFcm30QVT6IRfg1RY2OlOiMwc=
=t8HD
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2020-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread fix from Christian Brauner:
"This contains a single fix for all exported legacy fork helpers to
block accidental access to clone3() features in the upper 32 bits of
their respective flags arguments.
I got Cced on a glibc issue where someone reported consistent failures
for the legacy clone() syscall on ppc64le when sign extension was
performed (since the clone() syscall in glibc exposes the flags
argument as an int whereas the kernel uses unsigned long).
The legacy clone() syscall is odd in a bunch of ways and here two
things interact:
- First, legacy clone's flag argument is word-size dependent, i.e.
it's an unsigned long whereas most system calls with flag arguments
use int or unsigned int.
- Second, legacy clone() ignores unknown and deprecated flags.
The two of them taken together means that users on 64bit systems can
pass garbage for the upper 32bit of the clone() syscall since forever
and things would just work fine.
The following program compiled on a 64bit kernel prior to v5.7-rc1
will succeed and will fail post v5.7-rc1 with EBADF:
int main(int argc, char *argv[])
{
pid_t pid;
/* Note that legacy clone() has different argument ordering on
* different architectures so this won't work everywhere.
*
* Only set the upper 32 bits.
*/
pid = syscall(__NR_clone, 0xffffffff00000000 | SIGCHLD,
NULL, NULL, NULL, NULL);
if (pid < 0)
exit(EXIT_FAILURE);
if (pid == 0)
exit(EXIT_SUCCESS);
if (wait(NULL) != pid)
exit(EXIT_FAILURE);
exit(EXIT_SUCCESS);
}
Since legacy clone() couldn't be extended this was not a problem so
far and nobody really noticed or cared since nothing in the kernel
ever bothered to look at the upper 32 bits.
But once we introduced clone3() and expanded the flag argument in
struct clone_args to 64 bit we opened this can of worms. With the
first flag-based extension to clone3() making use of the upper 32 bits
of the flag argument we've effectively made it possible for the legacy
clone() syscall to reach clone3() only flags on accident. The sign
extension scenario is just the odd corner-case that we needed to
figure this out.
The reason we just realized this now and not already when we
introduced CLONE_CLEAR_SIGHAND was that CLONE_INTO_CGROUP assumes that
a valid cgroup file descriptor has been given - whereas
CLONE_CLEAR_SIGHAND doesn't need to verify anything. It just silently
resets the signal handlers to SIG_DFL.
So the sign extension (or the user accidently passing garbage for the
upper 32 bits) caused the CLONE_INTO_CGROUP bit to be raised and the
kernel to error out when it didn't find a valid cgroup file
descriptor.
Note, I'm also capping kernel_thread()'s flag argument mainly because
none of the new features make sense for kernel_thread() and we
shouldn't risk them being accidently activated however unlikely. If we
wanted to, we could even make kernel_thread() yell when an unknown
flag has been set which it doesn't do right now. But it's not worth
risking this in a bugfix imho"
* tag 'for-linus-2020-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fork: prevent accidental access to clone3 features
- Fix a crash when having function tracing and function stack tracing on
the command line. The ftrace trampolines are created as executable and
read only. But the stack tracer tries to modify them with text_poke()
which expects all kernel text to still be writable at boot.
Keep the trampolines writable at boot, and convert them to read-only
with the rest of the kernel.
- A selftest was triggering in the ring buffer iterator code, that
is no longer valid with the update of keeping the ring buffer
writable while a iterator is reading. Just bail after three failed
attempts to get an event and remove the warning and disabling of the
ring buffer.
- While modifying the ring buffer code, decided to remove all the
unnecessary BUG() calls.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXr1CDhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsXcAQCoL229SBrtHsn4DUO7eAQRppUT3hNw
RuKzvQ56+1GccQEAh8VGCeg89uMSK6imrTujEl6VmOUdbgrD5R96yiKoGQw=
=vi+k
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing fixes from Steven Rostedt:
"Various tracing fixes:
- Fix a crash when having function tracing and function stack tracing
on the command line.
The ftrace trampolines are created as executable and read only. But
the stack tracer tries to modify them with text_poke() which
expects all kernel text to still be writable at boot. Keep the
trampolines writable at boot, and convert them to read-only with
the rest of the kernel.
- A selftest was triggering in the ring buffer iterator code, that is
no longer valid with the update of keeping the ring buffer writable
while a iterator is reading.
Just bail after three failed attempts to get an event and remove
the warning and disabling of the ring buffer.
- While modifying the ring buffer code, decided to remove all the
unnecessary BUG() calls"
* tag 'trace-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Remove all BUG() calls
ring-buffer: Don't deactivate the ring buffer on failed iterator reads
x86/ftrace: Have ftrace trampolines turn read-only at the end of system boot up
Prevent the suspend-to-idle internal loop from busy spinning after
a spurious ACPI SCI wakeup in some cases.
-----BEGIN PGP SIGNATURE-----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=g9Or
-----END PGP SIGNATURE-----
Merge tag 'pm-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Prevent the suspend-to-idle internal loop from busy spinning after a
spurious ACPI SCI wakeup in some cases"
* tag 'pm-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: PM: Avoid premature returns from acpi_s2idle_wake()
KASAN is currently missing declarations for __asan_report* and __hwasan*
functions. This can lead to compiler warnings.
Reported-by: Leon Romanovsky <leon@kernel.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Leon Romanovsky <leon@kernel.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Link: http://lkml.kernel.org/r/45b445a76a79208918f0cc44bfabebaea909b54d.1589297433.git.andreyknvl@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KASAN is incompatible with some kernel debugging/tracing features.
There's been multiple patches that disable those feature for some of
KASAN files one by one. Instead of prolonging that, disable these
features for all KASAN files at once.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Link: http://lkml.kernel.org/r/29bd753d5ff5596425905b0b07f51153e2345cc1.1589297433.git.andreyknvl@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A user is not required to set a new address when using MREMAP_DONTUNMAP
as it can be used without MREMAP_FIXED. When doing so the remap event
will use new_addr which may not have been set and we didn't propagate it
back other then in the return value of remap_to.
Because ret is always the new address it's probably more correct to use
it rather than new_addr on the remap_event_complete call, and it
resolves this bug.
Fixes: e346b38130 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Brian Geffon <bgeffon@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Michael S . Tsirkin" <mst@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Link: http://lkml.kernel.org/r/20200506172158.218366-1-bgeffon@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This part was overlooked when reworking the gup code on multiple
retries.
When we get the 2nd+ retry, we'll be with TRIED flag set. Current code
will bail out on the 2nd retry because the !TRIED check will fail so the
retry logic will be skipped. What's worse is that, it will also return
zero which errornously hints the caller that the page is faulted in
while it's not.
The !TRIED flag check seems to not be needed even before the mutliple
retries change because if we get a VM_FAULT_RETRY, it must be the 1st
retry, and we should not have TRIED set for that.
Fix it by removing the !TRIED check, at the meantime check against fatal
signals properly before the page fault so we can still properly respond
to the user killing the process during retries.
Fixes: 4426e945df ("mm/gup: allow VM_FAULT_RETRY for multiple times")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Brian Geffon <bgeffon@google.com>
Link: http://lkml.kernel.org/r/20200502003523.8204-1-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is a possible race when ep_scan_ready_list() leaves ->rdllist and
->obflist empty for a short period of time although some events are
pending. It is quite likely that ep_events_available() observes empty
lists and goes to sleep.
Since commit 339ddb53d3 ("fs/epoll: remove unnecessary wakeups of
nested epoll") we are conservative in wakeups (there is only one place
for wakeup and this is ep_poll_callback()), thus ep_events_available()
must always observe correct state of two lists.
The easiest and correct way is to do the final check under the lock.
This does not impact the performance, since lock is taken anyway for
adding a wait entry to the wait queue.
The discussion of the problem can be found here:
https://lore.kernel.org/linux-fsdevel/a2f22c3c-c25a-4bda-8339-a7bdaf17849e@akamai.com/
In this patch barrierless __set_current_state() is used. This is safe
since waitqueue_active() is called under the same lock on wakeup side.
Short-circuit for fatal signals (i.e. fatal_signal_pending() check) is
moved to the line just before actual events harvesting routine. This is
fully compliant to what is said in the comment of the patch where the
actual fatal_signal_pending() check was added: c257a340ed ("fs, epoll:
short circuit fetching events if thread has been killed").
Fixes: 339ddb53d3 ("fs/epoll: remove unnecessary wakeups of nested epoll")
Reported-by: Jason Baron <jbaron@akamai.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jason Baron <jbaron@akamai.com>
Cc: Khazhismel Kumykov <khazhy@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200505145609.1865152-1-rpenyaev@suse.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A recent commit 9852ae3fe5 ("mm, memcg: consider subtrees in
memory.events") changed the behavior of memcg events, which will now
consider subtrees in memory.events.
But oom_kill event is a special one as it is used in both cgroup1 and
cgroup2. In cgroup1, it is displayed in memory.oom_control. The file
memory.oom_control is in both root memcg and non root memcg, that is
different with memory.event as it only in non-root memcg. That commit
is okay for cgroup2, but it is not okay for cgroup1 as it will cause
inconsistent behavior between root memcg and non-root memcg.
Here's an example on why this behavior is inconsistent in cgroup1.
root memcg
/
memcg foo
/
memcg bar
Suppose there's an oom_kill in memcg bar, then the oon_kill will be
root memcg : memory.oom_control(oom_kill) 0
/
memcg foo : memory.oom_control(oom_kill) 1
/
memcg bar : memory.oom_control(oom_kill) 1
For the non-root memcg, its memory.oom_control(oom_kill) includes its
descendants' oom_kill, but for root memcg, it doesn't include its
descendants' oom_kill. That means, memory.oom_control(oom_kill) has
different meanings in different memcgs. That is inconsistent. Then the
user has to know whether the memcg is root or not.
If we can't fully support it in cgroup1, for example by adding
memory.events.local into cgroup1 as well, then let's don't touch its
original behavior.
Fixes: 9852ae3fe5 ("mm, memcg: consider subtrees in memory.events")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200502141055.7378-1-laoar.shao@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In commit 2bef9aed6f ("usb: usbfs: correct kernel->user page attribute
mismatch") we switched from always calling remap_pfn_range() to call
dma_mmap_coherent() to handle issues with systems with non-coherent USB host
controller drivers. Unfortunatly, as syzbot quickly told us, not all the world
is host controllers with DMA support, so we need to check what host controller
we are attempting to talk to before doing this type of allocation.
Thanks to Christoph for the quick idea of how to fix this.
Fixes: 2bef9aed6f ("usb: usbfs: correct kernel->user page attribute mismatch")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot+353be47c9ce21b68b7ed@syzkaller.appspotmail.com
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20200514112711.1858252-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If raw_copy_from_user(to, from, N) returns K, callers expect
the first N - K bytes starting at to to have been replaced with
the contents of corresponding area starting at from and the last
K bytes of destination *left* *unmodified*.
What arch/sky/lib/usercopy.c is doing is broken - it can lead to e.g.
data corruption on write(2).
raw_copy_to_user() is inaccurate about return value, which is a bug,
but consequences are less drastic than for raw_copy_from_user().
And just what are those access_ok() doing in there? I mean, look into
linux/uaccess.h; that's where we do that check (as well as zero tail
on failure in the callers that need zeroing).
AFAICS, all of that shouldn't be hard to fix; something like a patch
below might make a useful starting point.
I would suggest moving these macros into usercopy.c (they are never
used anywhere else) and possibly expanding them there; if you leave
them alive, please at least rename __copy_user_zeroing(). Again,
it must not zero anything on failed read.
Said that, I'm not sure we won't be better off simply turning
usercopy.c into usercopy.S - all that is left there is a couple of
functions, each consisting only of inline asm.
Guo Ren reply:
Yes, raw_copy_from_user is wrong, it's no need zeroing code.
unsigned long _copy_from_user(void *to, const void __user *from,
unsigned long n)
{
unsigned long res = n;
might_fault();
if (likely(access_ok(from, n))) {
kasan_check_write(to, n);
res = raw_copy_from_user(to, from, n);
}
if (unlikely(res))
memset(to + (n - res), 0, res);
return res;
}
EXPORT_SYMBOL(_copy_from_user);
You are right and access_ok() should be removed.
but, how about:
do {
...
"2: stw %3, (%1, 0) \n" \
+ " subi %0, 4 \n" \
"9: stw %4, (%1, 4) \n" \
+ " subi %0, 4 \n" \
"10: stw %5, (%1, 8) \n" \
+ " subi %0, 4 \n" \
"11: stw %6, (%1, 12) \n" \
+ " subi %0, 4 \n" \
" addi %2, 16 \n" \
" addi %1, 16 \n" \
Don't expand __ex_table
AI Viro reply:
Hey, I've no idea about the instruction scheduling on csky -
if that doesn't slow the things down, all the better. It's just
that copy_to_user() and friends are on fairly hot codepaths,
and in quite a few situations they will dominate the speed of
e.g. read(2). So I tried to keep the fast path unchanged.
Up to the architecture maintainers, obviously. Which would be
you...
As for the fixups size increase (__ex_table size is unchanged)...
You have each of those macros expanded exactly once.
So the size is not a serious argument, IMO - useless complexity
would be, if it is, in fact, useless; the size... not really,
especially since those extra subi will at least offset it.
Again, up to you - asm optimizations of (essentially)
memcpy()-style loops are tricky and can depend upon the
fairly subtle details of architecture. So even on something
I know reasonably well I would resort to direct experiments
if I can't pass the buck to architecture maintainers.
It *is* worth optimizing - this is where read() from a file
that is already in page cache spends most of the time, etc.
Guo Ren reply:
Thx, after fixup some typo “sub %0, 4”, apply the patch.
TODO:
- user copy/from codes are still need optimizing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
The gdbmacros.txt use sp in thread_struct, but csky use ksp. This
cause bttnobp fail to excute.
TODO:
- Still couldn't display the contents of stack.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Lenovo Thinkpad T530 seems to have a sensitive internal mic capture
that needs to limit the mic boost like a few other Thinkpad models.
Although we may change the quirk for ALC269_FIXUP_LENOVO_DOCK, this
hits way too many other laptop models, so let's add a new fixup model
that limits the internal mic boost on top of the existing quirk and
apply to only T530.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1171293
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200514160533.10337-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There's a lot of checks to make sure the ring buffer is working, and if an
anomaly is detected, it safely shuts itself down. But there's a few cases
that it will call BUG(), which defeats the point of being safe (it crashes
the kernel when an anomaly is found!). There's no reason for them. Switch
them all to either WARN_ON_ONCE() (when no ring buffer descriptor is present),
or to RB_WARN_ON() (when a ring buffer descriptor is present).
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If the function tracer is running and the trace file is read (which uses the
ring buffer iterator), the iterator can get in sync with the writes, and
caues it to fail to find a page with content it can read three times. This
causes a warning and deactivation of the ring buffer code.
Looking at the other cases of failure to get an event, it appears that
there's a chance that the writer could cause them too. Since the iterator is
a "best effort" to read the ring buffer if there's an active writer (the
consumer reader is made for this case "see trace_pipe"), if it fails to get
an event after three tries, simply give up and return NULL. Don't warn, nor
disable the ring buffer on this failure.
Link: https://lore.kernel.org/r/20200429090508.GG5770@shao2-debian
Reported-by: kernel test robot <lkp@intel.com>
Fixes: ff84c50cfb ("ring-buffer: Do not die if rb_iter_peek() fails more than thrice")
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
