If the DAI was configured with a set_tdm_slots() call, use the information.
A platform or machine driver may configure each amplifier to extract
different bitSlots from the frame, or extract the same data and use
processing to generate the relevant output. The latter case is easier
to handle in case of orientation changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325212905.28145-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In qlcnic_83xx_get_reset_instruction_template, the variable
of null test is bad, so correct it.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Straightforward, except for save_altstack_ex() stuck in those.
Replace that thing with an analogue that would use unsafe_put_user()
instead of put_user_ex() (called compat_save_altstack()) and be done
with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently we have user_access block, followed by __put_user(),
deciding what the restorer will be and finally a put_user_try
block.
Moving the calculation of restorer first allows the rest
(actual copyout work) to coalesce into a single user_access block.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
1) Cleanups from Dan Carpenter and wenxu.
2) Paul and Roi, Some minor updates and fixes to E-Switch to address
issues introduced in the previous reg_c0 updates series.
3) Eli Cohen simplifies and improves flow steering matching group searches
and flow table entries version management.
4) Parav Pandit, improves devlink eswitch mode changes thread safety.
By making devlink rely on driver for thread safety and introducing mlx5
eswitch mode change protection.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl58SW8ACgkQSD+KveBX
+j4AxQf8DdrFrBD0NFTcAILS4bnTJC0I3xKRPb/2oYtWLVyJ9G5XAZqHC0DAG7xs
jy8xhIFbeUxgLEdcx0la5vdR1mPlzs4XBHTe99YwzwK/jojrA7YXrlb3kv+RXWVY
uNVAby68wh4EnO61R51ahIBXLPNbiYpo/wAWKvvBKRkOcYMVTKIFiP157AnJWObY
fxnt06I0NFaIX8Va4MEqkrmUYrI4jJcqOJC9FwRBLDhFHcFkLh0Gav3vJJ7M4BCB
ggPJpuZ4pu43qX9TtSOm8V/GlWWN0RB7PdbvliFBEHYG21hf9MfE8bPPKRlB7CO+
B5+9ULhpvbjX7yRrkZ7fd4zlQ1siew==
=Flln
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2020-03-25' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2020-03-25
1) Cleanups from Dan Carpenter and wenxu.
2) Paul and Roi, Some minor updates and fixes to E-Switch to address
issues introduced in the previous reg_c0 updates series.
3) Eli Cohen simplifies and improves flow steering matching group searches
and flow table entries version management.
4) Parav Pandit, improves devlink eswitch mode changes thread safety.
By making devlink rely on driver for thread safety and introducing mlx5
eswitch mode change protection.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
What's left is just a sequence of stores to userland addresses, with all
error handling, etc. done out of line. Calling that from user_access block
is safe, but rather than teaching objtool to recognize it as such we can
just make it always_inline - it is small enough and has few enough callers,
for the space savings not to be an issue.
Rename the sucker to __unsafe_setup_sigcontext32() and provide
unsafe_put_sigcontext32() with usual kind of semantics.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Further align HDA init sequence to the legacy non-DSP HDA driver by
calling snd_hdac_set_codec_wakeup() during the chip init sequence.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200325211233.27394-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The misc clock gating (MISCBDCGE) is disabled for controller reset and
reenabled once reset is complete.
Fix the case when error happens during reset, and clock gating is
left disabled. The clock gating should be reenabled also in this case.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200325211233.27394-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the VirtIO case the sof_pcm_open() function isn't called on the
host during guest streaming, which then leaves "work" structures
uninitialised. However it is then used to handle position update
messages from the DSP. Move their initialisation to immediately after
allocation of the containing structure.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200325211233.27394-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use for_each_pcm_streams() to enumerate streams in sof_dai_load()
instead of doing that manually.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200325211233.27394-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Improve the DSP power state logs with the state names
instead of values.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325211233.27394-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
drivers/net/ethernet/atheros/atlx/atl2.c:40:19: warning: ‘atl2_driver_string’ defined but not used [-Wunused-const-variable=]
static const char atl2_driver_string[] = "Atheros(R) L2 Ethernet Driver";
^~~~~~~~~~~~~~~~~~
commit ea97374214 ("net/atheros: Clean atheros code from driver version")
left behind this, remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the commit f73b12812a
("tipc: improve throughput between nodes in netns"), we're missing a check
to handle TIPC_DIRECT_MSG type, it's still using old sending mechanism for
this message type. So, throughput improvement is not significant as
expected.
Besides that, when sending a large message with that type, we're also
handle wrong receiving queue, it should be enqueued in socket receiving
instead of multicast messages.
Fix this by adding the missing case for TIPC_DIRECT_MSG.
Fixes: f73b12812a ("tipc: improve throughput between nodes in netns")
Reported-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since snprintf() returns the would-be-output size instead of the actual
output size, the succeeding calls may go beyond the given buffer limit.
Fix it by replacing with scnprintf().
Link: https://lore.kernel.org/r/20200319154641.23711-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Update tgl mach table with: Maxim98373 Amp and ALC5682 hp codec.
Both of the codecs are on I2S bus.
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325213245.28247-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch does the below:
1. Adds the driver data and updates quirk info for TGL
with Max98373 speaker amp and ALC5682 headset codec.
2. Added max98373 speaker related code to common file for re-use.
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325213245.28247-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add "Spk Switch" and associated widget, route to max98360a
speaker amp for power saving, also remove the speaker_amp_init()
callback with complete separated tables for max98373 and max98360a.
Signed-off-by: Bhat, Uday M <uday.m.bhat@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Link: https://lore.kernel.org/r/20200325213245.28247-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Without the dynamic flag to allow runtime routing, the card cannot
probe on chromebooks because SOF is constantly waiting for the link.
Adding flag back to allow upstream kernels to work on rt5682 based
chromebooks since SOF can now ignore the hard coded front end.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325213245.28247-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Several MAINTAINERS updates
- Memory leak regression in ODP
- Several fixes for syzkaller related crashes. Google recently taught
syzkaller to create the software RDMA devices
- Crash fixes for HFI1
- Several fixes for mlx5 crashes
- Prevent unprivileged access to an unsafe mlx5 HW resource
-----BEGIN PGP SIGNATURE-----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=RhVe
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"A small set of late-rc patches, mostly fixes for various crashers,
some syzkaller fixes and a mlx5 HW limitation:
- Several MAINTAINERS updates
- Memory leak regression in ODP
- Several fixes for syzkaller related crashes. Google recently taught
syzkaller to create the software RDMA devices
- Crash fixes for HFI1
- Several fixes for mlx5 crashes
- Prevent unprivileged access to an unsafe mlx5 HW resource"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx5: Block delay drop to unprivileged users
RDMA/mlx5: Fix access to wrong pointer while performing flush due to error
RDMA/core: Ensure security pkey modify is not lost
MAINTAINERS: Clean RXE section and add Zhu as RXE maintainer
IB/hfi1: Ensure pq is not left on waitlist
IB/rdmavt: Free kernel completion queue when done
RDMA/mad: Do not crash if the rdma device does not have a umad interface
RDMA/core: Fix missing error check on dev_set_name()
RDMA/nl: Do not permit empty devices names during RDMA_NLDEV_CMD_NEWLINK/SET
RDMA/mlx5: Fix the number of hwcounters of a dynamic counter
MAINTAINERS: Update maintainers for HISILICON ROCE DRIVER
RDMA/odp: Fix leaking the tgid for implicit ODP
hmm_range_fault() will succeed for any kind of device private memory, even
if it doesn't belong to the calling entity. While nouveau has some crude
checks for that, they are broken because they assume nouveau is the only
user of device private memory. Fix this by passing in an expected pgmap
owner in the hmm_range_fault structure.
If a device_private page is found and doesn't match the owner then it is
treated as an non-present and non-faultable page.
This prevents a bug in amdgpu, where it doesn't know how to handle
device_private pages, but hmm_range_fault would return them anyhow.
Fixes: 4ef589dc9b ("mm/hmm/devmem: device memory hotplug using ZONE_DEVICE")
Link: https://lore.kernel.org/r/20200316193216.920734-5-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove the HMM_PFN_DEVICE_PRIVATE flag, no driver has ever set this flag
on input, and the only place that uses it on output can be trivially
changed to use is_device_private_page().
This removes the ability to request that device_private pages are faulted
back into system memory.
Link: https://lore.kernel.org/r/20200316193216.920734-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add a new src_owner field to struct migrate_vma. If the field is set,
only device private pages with page->pgmap->owner equal to that field are
migrated. If the field is not set only "normal" pages are migrated.
Fixes: df6ad69838 ("mm/device-public-memory: device memory cache coherent with CPU")
Link: https://lore.kernel.org/r/20200316193216.920734-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Tested-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add a new opaque owner field to struct dev_pagemap, which will allow the
hmm and migrate_vma code to identify who owns ZONE_DEVICE memory, and
refuse to work on mappings not owned by the calling entity.
Link: https://lore.kernel.org/r/20200316193216.920734-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Tested-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no good reason for this split, as it just obsfucates the flow.
Link: https://lore.kernel.org/r/20200316135310.899364-6-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Setting a pfns entry to NONE before returning -EBUSY is a bug that will
cause corruption of the input flags on the next loop.
There is just a single caller using hmm_vma_walk_hole_() for the non-fault
case. Use hmm_pfns_fill() to fill the whole pfn array with zeroes in the
only caller for the non-fault case and remove the non-fault path from
hmm_vma_walk_hole_(). This avoids setting NONE before returning -EBUSY.
Also rename the function to hmm_vma_fault() to better describe what it
does.
Fixes: 2aee09d8c1 ("mm/hmm: change hmm_vma_fault() to allow write fault on page basis")
Link: https://lore.kernel.org/r/20200316135310.899364-5-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove the rather confusing goto label and just handle the fault case
directly in the branch checking for it.
Link: https://lore.kernel.org/r/20200316135310.899364-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The HMM_FAULT_ALLOW_RETRY isn't used anywhere in the tree. Remove it and
the weird -EAGAIN handling where handle_mm_fault() drops the mmap_sem.
Link: https://lore.kernel.org/r/20200316135310.899364-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All callers of hmm_range_fault depend on CONFIG_HMM_MIRROR, so don't
bother with a stub.
Link: https://lore.kernel.org/r/20200316135310.899364-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
pmd_to_hmm_pfn_flags() already checks it and makes the cpu flags 0. If no
fault is requested then the pfns should be returned with the not valid
flags.
It should not unconditionally fault if faulting is not requested.
Fixes: 2aee09d8c1 ("mm/hmm: change hmm_vma_fault() to allow write fault on page basis")
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently if a special PTE is encountered hmm_range_fault() immediately
returns EFAULT and sets the HMM_PFN_SPECIAL error output (which nothing
uses).
EFAULT should only be returned after testing with hmm_pte_need_fault().
Also pte_devmap() and pte_special() are exclusive, and there is no need to
check IS_ENABLED, pte_special() is stubbed out to return false on
unsupported architectures.
Fixes: 992de9a8b7 ("mm/hmm: allow to mirror vma of a file on a DAX backed filesystem")
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
hmm_range_fault() should never return 0 if the caller requested a valid
page, but the pfns output for that page would be HMM_PFN_ERROR.
hmm_pte_need_fault() must always be called before setting HMM_PFN_ERROR to
detect if the page is in faulting mode or not.
Fix two cases in hmm_vma_walk_pmd() and reorganize some of the duplicated
code.
Fixes: d08faca018 ("mm/hmm: properly handle migration pmd")
Fixes: da4c3c735e ("mm/hmm/mirror: helper to snapshot CPU page table")
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The intention with this code is to determine if the caller required the
pages to be valid, and if so, then take some action to make them valid.
The action varies depending on the page type.
In all cases, if the caller doesn't ask for the page, then
hmm_range_fault() should not return an error.
Revise the implementation to be clearer, and fix some bugs:
- hmm_pte_need_fault() must always be called before testing fault or
write_fault otherwise the defaults of false apply and the if()'s don't
work. This was missed on the is_migration_entry() branch
- -EFAULT should not be returned unless hmm_pte_need_fault() indicates
fault is required - ie snapshotting should not fail.
- For !pte_present() the cpu_flags are always 0, except in the special
case of is_device_private_entry(), calling pte_to_hmm_pfn_flags() is
confusing.
Reorganize the flow so that it always follows the pattern of calling
hmm_pte_need_fault() and then checking fault || write_fault.
Fixes: 2aee09d8c1 ("mm/hmm: change hmm_vma_fault() to allow write fault on page basis")
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All return paths that do EFAULT must call hmm_range_need_fault() to
determine if the user requires this page to be valid.
If the page cannot be made valid if the user later requires it, due to vma
flags in this case, then the return should be HMM_PFN_ERROR.
Fixes: a3e0d41c2b ("mm/hmm: improve driver API to work and wait over a range")
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All success exit paths from the walker functions must set the pfns array.
A migration entry with no required fault is a HMM_PFN_NONE return, just
like the pte case.
Fixes: d08faca018 ("mm/hmm: properly handle migration pmd")
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This eventually calls into handle_mm_fault() which is a sleeping function.
Release the lock first.
hmm_vma_walk_hole() does not touch the contents of the PUD, so it does not
need the lock.
Fixes: 3afc423632 ("mm: pagewalk: add p4d_entry() and pgd_entry()")
Cc: Steven Price <steven.price@arm.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Many of the direct returns of error skipped doing the pte_unmap(). All non
zero exit paths must unmap the pte.
The pte_unmap() is split unnaturally like this because some of the error
exit paths trigger a sleep and must release the lock before sleeping.
Fixes: 992de9a8b7 ("mm/hmm: allow to mirror vma of a file on a DAX backed filesystem")
Fixes: 53f5c3f489 ("mm/hmm: factor out pte and pmd handling to simplify hmm_vma_walk_pmd()")
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch fixes the private_flags of mode to be checked and
compared against uapi.mode and not from hw.mode. This helps
properly trigger modeset at boot if desired by driver.
It helps resolve audio_codec initialization issues if display
is connected at boot. Initial discussion on this issue has happened
on below thread:
https://patchwork.freedesktop.org/series/74828/
v2: No functional change. Fixed the Closes tag and added
Maarten's RB.
v3: Added Fixes tag.
Cc: Ville Syrjä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: Souza, Jose <jose.souza@intel.com>
Fixes: 58d124ea27 ("drm/i915: Complete crtc hw/uapi split, v6.")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1363
Suggested-by: Ville Syrjä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: SweeAun Khor <swee.aun.khor@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326125111.11081-1-uma.shankar@intel.com
(cherry picked from commit d5e5670592)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We move the virtual breadcrumb from one physical engine to the next, if
the next virtual request is scheduled on a new physical engine. Since
the virtual context can only be in one signal queue, we need it to track
the current physical engine for the new breadcrumbs. However, to move
the list we need both breadcrumb locks -- and since we cannot take both
at the same time (unless we are careful and always ensure consistent
ordering) stage the movement of the signaler via the current virtual
request.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1510
Fixes: 6d06779e86 ("drm/i915: Load balancing across a virtual engine")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325130059.30600-1-chris@chris-wilson.co.uk
(cherry picked from commit 6c81e21a47)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On Ivybridge, we can go lower than rc6 to rc6p. And this is required for
Ivybridge to hit the same minimum power consumption as rc6 on other
platforms, so make it so.
v2: Update selftest to include all rc6 residency counters
Note that Andi did mention that we should be converting the magic
numbers into opaque magic macros, so if they ever get reused (unlikely
given only Ivybridge used the extra modes) we'll need to pay back the
technical debt.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1518
Fixes: 730eaeb524 ("drm/i915/gt: Manual rc6 entry upon parking")
Testcase: igt/i915_pm_rc6_residency/rc6-idle
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200324134232.8773-1-chris@chris-wilson.co.uk
(cherry picked from commit 13c5a577b3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Abuse^W Take advantage that we know we are inside the GT wakeref and
that prevents any client execbuf from reopening the i915_vma in order to
claim all the vma to close without having to drop the spinlock to free
each one individually. By keeping the spinlock, we do not have to
restart if we run concurrently with i915_gem_free_objects -- which
causes them both to restart continually and make very very slow
progress.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1361
Fixes: 77853186e5 ("drm/i915: Claim vma while under closed_lock in i915_vma_parked()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323092841.22240-2-chris@chris-wilson.co.uk
(cherry picked from commit 3447c4c55d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If we park/unpark faster than we can respond to RPS events, we never
will process a downclock event after expiring a waitboost, and thus we
will forever restart the GPU at max clocks even if the workload switches
and doesn't justify full power.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1500
Fixes: 3e7abf8141 ("drm/i915: Extract GT render power state management")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200322163225.28791-1-chris@chris-wilson.co.uk
Cc: <stable@vger.kernel.org> # v5.5+
(cherry picked from commit 21abf0bf16)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Use the restored ability to check if a context is closed to decide
whether or not to immediately ban the context from further execution
after a hang.
Fixes: be90e34483 ("drm/i915/gt: Cancel banned contexts after GT reset")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319170707.8262-2-chris@chris-wilson.co.uk
(cherry picked from commit 8e37d69913)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
I need to keep the GEM context around a bit longer so adding an explicit
flag for syncing execbuf with closed/abandonded contexts.
v2:
* Use already available context flags. (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319170707.8262-1-chris@chris-wilson.co.uk
(cherry picked from commit 207e4a71fb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The KERN_VIRT_START defines the start virtual address of kernel space.
Use this macro instead of magic number.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
In a similar manner to arm64, x86, powerpc, etc., it can traverse all
page tables, and dump the page table layout with the memory types and
permissions.
Add a debugfs file at /sys/kernel/debug/kernel_page_tables to export
the page table layout to userspace.
Signed-off-by: Zong Li <zong.li@sifive.com>
Tested-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
