This adds a new function to set the XDP fd while specifying the FD of the
program to replace, using the newly added IFLA_XDP_EXPECTED_FD netlink
parameter. The new function uses the opts struct mechanism to be extendable
in the future.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158515700857.92963.7052131201257841700.stgit@toke.dk
While it is currently possible for userspace to specify that an existing
XDP program should not be replaced when attaching to an interface, there is
no mechanism to safely replace a specific XDP program with another.
This patch adds a new netlink attribute, IFLA_XDP_EXPECTED_FD, which can be
set along with IFLA_XDP_FD. If set, the kernel will check that the program
currently loaded on the interface matches the expected one, and fail the
operation if it does not. This corresponds to a 'cmpxchg' memory operation.
Setting the new attribute with a negative value means that no program is
expected to be attached, which corresponds to setting the UPDATE_IF_NOEXIST
flag.
A new companion flag, XDP_FLAGS_REPLACE, is also added to explicitly
request checking of the EXPECTED_FD attribute. This is needed for userspace
to discover whether the kernel supports the new attribute.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/158515700640.92963.3551295145441017022.stgit@toke.dk
Report the maximum amount of sample the EC can hold.
This is not tunable, but can be useful for application to find out the
maximum amount of time it can sleep when hwfifo_timeout is set to a
large number.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Expose EC minimal interrupt period through buffer/hwfifo_timeout:
- Maximal timeout is limited to 65s.
- When timeout for all sensors is set to 0, EC will not send events,
even if the sensor sampling rate is greater than 0.
Rename frequency to sampling_frequency to match IIO ABI.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Since cros_ec_sensorhub is shutting down the FIFO when the device
suspends, no need to slow down the EC sampling period rate.
It was necesseary to do that before command CMD_FIFO_INT_ENABLE was
introduced, but now all supported chromebooks have it.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
When EC supports FIFO, each IIO device registers a callback, to put
samples in the buffer when they arrives from the FIFO.
When no FIFO, the user space app needs to call trigger_new, or better
register a high precision timer.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Some IIO devices may want to override the default (realtime) to another
clock source by default.
It can beneficial when timestamps coming from the hardware or underlying
drivers are already in that format.
It can always be overridden by attribute current_timestamp_clock.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
To prevent comment rot, move function description to
cros_ec_sensors_core.c.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Events are timestamped in EC time space, their timestamps need to be
converted in host time space.
The assumption is the time delta between when the interrupt is sent
by the EC and when it is receive by the host is a [small] constant.
This is not always true, even with hard-wired interrupt. To mitigate
worst offenders, add a median filter to weed out bigger than expected
delays.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
cros_ec_sensorhub registers a listener and query motion sense FIFO,
spread to iio sensors registers.
To test, we can use libiio:
iiod&
iio_readdev -u ip:localhost -T 10000 -s 25 -b 16 cros-ec-gyro | od -x
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
To better manage resources, store the number of sensors reported by
the EC.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Kconfig section is misplaced. Put it in the same order as it is done
in Makefile for this driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
For better readability reformat GUID assignment.
While here, add the comment how this GUID looks in a string representation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Driver depends to ACPI, this marco always is evaluated to the parameter,
thus useless. Drop it for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
As reported by kbuild bot the struct mshw0011_lookup in never used.
Drop its definition for good.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Pull i2c fixes from Wolfram Sang:
"Three more driver bugfixes, and two doc improvements fixing build
warnings while we are here"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: pca-platform: Use platform_irq_get_optional
i2c: st: fix missing struct parameter description
i2c: nvidia-gpu: Handle timeout correctly in gpu_i2c_check_status()
i2c: fix a doc warning
i2c: hix5hd2: add missed clk_disable_unprepare in remove
When the UEFI/BIOS or bootloader has not initialised a PCIe device we would
get the following message:
kern.warning: pci 0000:00:01.0: ASPM: current common clock configuration is broken, reconfiguring
"warning" and "broken" are slightly misleading. On an embedded system it is
quite possible for the bootloader to avoid configuring PCIe devices if they
are not needed.
Downgrade the message to pci_info() and change "broken" to "inconsistent"
since we fix up the inconsistency in the code immediately following the
message (and emit an error if that fails).
Link: https://lore.kernel.org/r/20200323035530.11569-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The AER interfaces to clear error status registers were a confusing mess:
- pci_cleanup_aer_uncorrect_error_status() cleared non-fatal errors
from the Uncorrectable Error Status register.
- pci_aer_clear_fatal_status() cleared fatal errors from the
Uncorrectable Error Status register.
- pci_cleanup_aer_error_status_regs() cleared the Root Error Status
register (for Root Ports), the Uncorrectable Error Status register,
and the Correctable Error Status register.
Rename them to make them consistent:
From To
---------------------------------------- -------------------------------
pci_cleanup_aer_uncorrect_error_status() pci_aer_clear_nonfatal_status()
pci_aer_clear_fatal_status() pci_aer_clear_fatal_status()
pci_cleanup_aer_error_status_regs() pci_aer_clear_status()
Since pci_cleanup_aer_error_status_regs() (renamed to
pci_aer_clear_status()) is only used within drivers/pci/, move the
declaration from <linux/aer.h> to drivers/pci/pci.h.
[bhelgaas: commit log, add renames]
Link: https://lore.kernel.org/r/d1310a75dc3d28f7e8da4e99c45fbd3e60fe238e.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Error Disconnect Recover (EDR) is a feature that allows ACPI firmware to
notify OSPM that a device has been disconnected due to an error condition
(ACPI v6.3, sec 5.6.6). OSPM advertises its support for EDR on PCI devices
via _OSC (see [1], sec 4.5.1, table 4-4). The OSPM EDR notify handler
should invalidate software state associated with disconnected devices and
may attempt to recover them. OSPM communicates the status of recovery to
the firmware via _OST (sec 6.3.5.2).
For PCIe, firmware may use Downstream Port Containment (DPC) to support
EDR. Per [1], sec 4.5.1, table 4-6, even if firmware has retained control
of DPC, OSPM may read/write DPC control and status registers during the EDR
notification processing window, i.e., from the time it receives an EDR
notification until it clears the DPC Trigger Status.
Note that per [1], sec 4.5.1 and 4.5.2.4,
1. If the OS supports EDR, it should advertise that to firmware by
setting OSC_PCI_EDR_SUPPORT in _OSC Support.
2. If the OS sets OSC_PCI_EXPRESS_DPC_CONTROL in _OSC Control to request
control of the DPC capability, it must also set OSC_PCI_EDR_SUPPORT in
_OSC Support.
Add an EDR notify handler to attempt recovery.
[1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019,
affecting PCI Firmware Specification, Rev. 3.2
https://members.pcisig.com/wg/PCI-SIG/document/12888
[bhelgaas: squash add/enable patches into one]
Link: https://lore.kernel.org/r/90f91fe6d25c13f9d2255d2ce97ca15be307e1bb.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
If firmware controls DPC, it is generally responsible for managing the DPC
capability and events, and the OS should not access the DPC capability.
However, if firmware controls DPC and both the OS and the platform support
Error Disconnect Recover (EDR) notifications, the OS EDR notify handler is
responsible for recovery, and the notify handler may read/write the DPC
capability until it clears the DPC Trigger Status bit. See [1], sec 4.5.1,
table 4-6.
Expose some DPC error handling functions so they can be used by the EDR
notify handler.
[1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019,
affecting PCI Firmware Specification, Rev. 3.2
https://members.pcisig.com/wg/PCI-SIG/document/12888
Link: https://lore.kernel.org/r/e9000bb15b3a4293e81d98bb29ead7c84a6393c9.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Per the SFI _OSC and DPC Updates ECN [1] implementation note flowchart, the
OS seems to be expected to clear AER status even if it doesn't have
ownership of the AER capability. Unlike the DPC capability, where a DPC
ECN [2] specifies a window when the OS is allowed to access DPC registers
even if it doesn't have ownership, there is no clear model for AER.
Add pci_aer_raw_clear_status() to clear the AER error status registers
unconditionally. This is intended for use only by the EDR path (see [2]).
[1] System Firmware Intermediary (SFI) _OSC and DPC Updates ECN, Feb 24,
2020, affecting PCI Firmware Specification, Rev. 3.2
https://members.pcisig.com/wg/PCI-SIG/document/14076
[2] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019,
affecting PCI Firmware Specification, Rev. 3.2
https://members.pcisig.com/wg/PCI-SIG/document/12888
[bhelgaas: changelog]
Link: https://lore.kernel.org/r/c19ad28f3633cce67448609e89a75635da0da07d.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
As per the DPC Enhancements ECN [1], sec 4.5.1, table 4-4, if the OS
supports Error Disconnect Recover (EDR), it must invalidate the software
state associated with child devices of the port without attempting to
access the child device hardware. In addition, if the OS supports DPC, it
must attempt to recover the child devices if the port implements the DPC
Capability. If the OS continues operation, the OS must inform the firmware
of the status of the recovery operation via the _OST method.
Return the result of pcie_do_recovery() so we can report it to firmware via
_OST.
[1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019,
affecting PCI Firmware Specification, Rev. 3.2
https://members.pcisig.com/wg/PCI-SIG/document/12888
Link: https://lore.kernel.org/r/eb60ec89448769349c6722954ffbf2de163155b5.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Previously we passed the PCIe service type parameter to pcie_do_recovery(),
where reset_link() looked up the underlying pci_port_service_driver and its
.reset_link() function pointer. Instead of using this roundabout way, we
can just pass the driver-specific .reset_link() callback function when
calling pcie_do_recovery() function.
This allows us to call pcie_do_recovery() from code that is not a PCIe port
service driver, e.g., Error Disconnect Recover (EDR) support.
Remove pcie_port_find_service() and pcie_port_service_driver.reset_link
since they are now unused.
Link: https://lore.kernel.org/r/60e02b87b526cdf2930400059d98704bf0a147d1.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Fix build warnings when building net/bpf/test_run.o with W=1 due
to missing prototype for bpf_fentry_test{1..6}.
Instead of declaring prototypes, turn off warnings with
__diag_{push,ignore,pop} as pointed out by Alexei.
Signed-off-by: Jean-Philippe Menil <jpmenil@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200327204713.28050-1-jpmenil@gmail.com
Commit bdb5ac8577 ("PCI/ERR: Handle fatal error recovery") uses
reset_link() to recover from fatal errors. But during fatal error
recovery, if the initial value of error status is PCI_ERS_RESULT_DISCONNECT
or PCI_ERS_RESULT_NO_AER_DRIVER then even after successful recovery (using
reset_link()) pcie_do_recovery() will report the recovery result as
failure. Update the status of error after reset_link().
You can reproduce this issue by triggering a SW DPC using "DPC Software
Trigger" bit in "DPC Control Register". You should see recovery failed
dmesg log as below:
pcieport 0000:00:16.0: DPC: containment event, status:0x1f27 source:0x0000
pcieport 0000:00:16.0: DPC: software trigger detected
pci 0000:04:00.0: AER: can't recover (no error_detected callback)
pcieport 0000:00:16.0: AER: device recovery failed
Fixes: bdb5ac8577 ("PCI/ERR: Handle fatal error recovery")
Link: https://lore.kernel.org/r/a255fcb3a3fdebcd90f84e08b555f1786eb8eba2.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com
[bhelgaas: split pci_channel_io_frozen simplification to separate patch]
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Keith Busch <keith.busch@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
If the inode buffer backing a particular inode is locked,
xfs_iflush() returns -EAGAIN and xfs_inode_item_push() skips the
inode. It still returns success to xfsaild, however, which bypasses
the xfsaild backoff heuristic. Update xfs_inode_item_push() to
return locked status if the inode buffer couldn't be locked.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
A dquot flush currently blocks on the buffer lock for the underlying
dquot buffer. In turn, this causes xfsaild to block rather than
continue processing other items in the meantime. Update
xfs_qm_dqflush() to trylock the buffer, similar to how inode buffers
are handled, and return -EAGAIN if the lock fails. Fix up any
callers that don't currently handle the error properly.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Since the "no-allocation" reservations for file creations has
been removed, the resblks value should be larger than zero, so
remove unnecessary ternary conditional.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: s/judgment/ternary/]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Depending on selected SMP config options soc_device didn't get
initialised at all. With UP config vmlinux didn't link because
of missing soc bus.
Fixes: 71b9b5e013 ("MIPS: ralink: mt7621: introduce 'soc_device' initialization")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Tested-by: René van Dorst <opensource@vdorst.com>
Two small fixes, one in drivers (qla2xxx) and one in the core (sd) to
try to cope with USB enclosures that silently change reported
parameters.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXn9r4CYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishcRAAQCoW8Q2
raOl/SkEJ9CrqAsuav4B4HPl+B08wno3lHnp6wEA5Tkiw1aCLjqPBx/k0FctlRaD
wQIxxBD8dy47cFV/qfo=
=tWW/
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small fixes: one in drivers (qla2xxx), and one in the core (sd) to
try to cope with USB enclosures that silently change reported
parameters"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Fix optimal I/O size for devices that change reported values
scsi: qla2xxx: Fix I/Os being passed down when FC device is being deleted
Fix a sharp edge in xsk_umem__create and xsk_socket__create. Almost all of
the members of the ring buffer structs are initialized, but the "cached_xxx"
variables are not all initialized. The caller is required to zero them.
This is needlessly dangerous. The results if you don't do it can be very bad.
For example, they can cause xsk_prod_nb_free and xsk_cons_nb_avail to return
values greater than the size of the queue. xsk_ring_cons__peek can return an
index that does not refer to an item that has been queued.
I have confirmed that without this change, my program misbehaves unless I
memset the ring buffers to zero before calling the function. Afterwards,
my program works without (or with) the memset.
Signed-off-by: Fletcher Dunn <fletcherd@valvesoftware.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/85f12913cde94b19bfcb598344701c38@valvesoftware.com
New Features:
- Allow one active connection and several zombie connections to prevent
blocking if the remote server is unresponsive.
Bugfixes and Cleanups:
- Enhance MR-related trace points
- Refactor connection set-up and disconnect functions
- Make Protection Domains per-connection instead of per-transport
- Merge struct rpcrdma_ia into rpcrdma_ep
-----BEGIN PGP SIGNATURE-----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=piIM
-----END PGP SIGNATURE-----
Merge tag 'nfs-rdma-for-5.7-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
NFSoRDMA Client Updates for Linux 5.7
New Features:
- Allow one active connection and several zombie connections to prevent
blocking if the remote server is unresponsive.
Bugfixes and Cleanups:
- Enhance MR-related trace points
- Refactor connection set-up and disconnect functions
- Make Protection Domains per-connection instead of per-transport
- Merge struct rpcrdma_ia into rpcrdma_ep
If the FLUSH_SYNC flag is set, nfs_initiate_pgio() will currently
wait for completion, and then return the status of the I/O operation.
What we actually want to report in nfs_pageio_doio() is whether or
not the RPC call was launched successfully, whereas actual I/O
status is intended handled in the reply callbacks.
Since FLUSH_SYNC is never set by any of the callers anyway, let's
just remove that code altogether.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
In acpi_get_psd_map() variable all_cpu_data[] can't be NULL and variable
match_cpc_ptr has been checked before, no need check again at the end of
the funchtion.
Some additional optimizations can be made on top of that.
Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Bit spinlocks are problematic if PREEMPT_RT is enabled, because they
disable preemption, which is undesired for latency reasons and breaks when
regular spinlocks are taken within the bit_spinlock locked region because
regular spinlocks are converted to 'sleeping spinlocks' on RT.
PREEMPT_RT replaced the bit spinlocks with regular spinlocks to avoid this
problem. The replacement was done conditionaly at compile time, but
Christoph requested to do an unconditional conversion.
Jan suggested to move the spinlock into a existing padding hole which
avoids a size increase of struct buffer_head on production kernels.
As a benefit the lock gains lockdep coverage.
[ bigeasy: Remove the wrapper and use always spinlock_t and move it into
the padding hole ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@infradead.org>
Link: https://lkml.kernel.org/r/20191118132824.rclhrbujqh4b4g4d@linutronix.de
The pkg_temp_lock spinlock is acquired in the thermal vector handler which
is truly atomic context even on PREEMPT_RT kernels.
The critical sections are tiny, so change it to a raw spinlock.
Signed-off-by: Clark Williams <williams@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191008110021.2j44ayunal7fkb7i@linutronix.de
Minor editorial fixes:
- remove 'enabled' from PREEMPT_RT enabled kernels for consistency
- add some periods for consistency
- add "'" for possessive CPU's
- spell out interrupts
[ tglx: Picked up Paul's suggestions ]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lkml.kernel.org/r/ac615f36-0b44-408d-aeab-d76e4241add4@infradead.org
The documentation of rw_semaphores is wrong as it claims that the non-owner
reader release is not supported by RT. That's just history biased memory
distortion.
Split the 'Owner semantics' section up and add separate sections for
semaphore and rw_semaphore to reflect reality.
Aside of that the following updates are done:
- Add pseudo code to document the spinlock state preserving mechanism on
PREEMPT_RT
- Wordsmith the bitspinlock and lock nesting sections
Co-developed-by: Paul McKenney <paulmck@kernel.org>
Signed-off-by: Paul McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/87wo78y5yy.fsf@nanos.tec.linutronix.de
The set of values asce_limit may be assigned with is TASK_SIZE_MAX,
_REGION1_SIZE, _REGION2_SIZE and 0 as a special case if the callback
was called from execve().
Do VM_BUG_ON() if asce_limit is something else.
Save few CPU cycles by removing unnecessary asce_limit re-assignment
in case of 3-level task and redundant PGD entry type reconstruction.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This update consolidates page table handling code. Because
there are hardly any 31-bit binaries left we do not need to
optimize for that.
No extra efforts are needed to ensure that a compat task does
not map anything above 2GB. The TASK_SIZE limit for 31-bit
tasks is 2GB already and the generic code does check that a
resulting map address would not surpass that limit.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
