In preparation for adding the SCSI documents to the documentation
body, add an empty index for it.
The next patches should be adding contents to it, as files get
converted to ReST format.
Link: https://lore.kernel.org/r/4d8c1b7ebe5898ac4a8265ca5e5a9552da3b426f.1583136624.git.mchehab+huawei@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Having this log in a ring buffer helps to diagnose qla2xxx driver and
firmware issues instead of having to reproduce the problem with
extended_logging enabled. This saves cycles and helps when it is hard
to reproduce problem.
Link: https://lore.kernel.org/r/1581557368-32080-1-git-send-email-rajan.shanmugavelu@oracle.com
Reviewed-by: Joe Jin <joe.jin@oracle.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Rajan Shanmugavelu <rajan.shanmugavelu@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Device quirk "UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE" is enabled for all
Samsung devices by default currently.
However MediaTek UFS host requires different host PA_TACTIVATE
configuration. Hence clear this quirk first and then apply vendor-specific
value in vops callback.
Link: https://lore.kernel.org/r/20200302135346.16797-1-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix up a compiler warning introduced via 54b04c99d02e
Link: https://lore.kernel.org/r/1583159961-15903-1-git-send-email-brking@linux.vnet.ibm.com
Fixes: 54b04c99d02e ("scsi: ibmvfc: Avoid loss of all paths during SVC node reboot")
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When driver debugging is not enabled, change the debug print macros
to use the no_printk() macro.
This fixes a gcc warning when -Wextra is set:
../drivers/message/fusion/mptlan.c:266:39: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
I have verified that there is very little object code change (with
gcc 7.5.0). There are a few changes like:
cmp %a,%b
jl $1
to
cmp %b,%a
jg $1
Link: https://lore.kernel.org/r/ff9df31b-c4c1-c942-1cbf-18039e084c8e@infradead.org
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Reviewed-by: Bart van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
iSCSI session destruction can be arbitrarily slow, since it might require
network operations and serialization inside the SCSI layer. This patch
adds a new user event to trigger the destruction work asynchronously,
releasing the rx_queue_mutex as soon as the operation is queued and before
it is performed. This change allows other operations to run in other
sessions in the meantime, removing one of the major iSCSI bottlenecks for
us.
To prevent the session from being used after the destruction request, we
remove it immediately from the sesslist. This simplifies the locking
required during the asynchronous removal.
Link: https://lore.kernel.org/r/20200227195945.761719-1-krisman@collabora.com
Co-developed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Co-developed-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Frank Mayhar <fmayhar@google.com>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the occasional adapter panic when sg_reset is issued with -d, -t, -b
and -H flags. Removal of command type HBA_IU_TYPE_SCSI_TM_REQ in
aac_hba_send since iu_type, request_id and fib_flags are not populated.
Device and target reset handlers are made to send TMF commands only when
reset_state is 0.
Link: https://lore.kernel.org/r/1581553771-25796-1-git-send-email-Sagar.Biradar@microchip.com
Reviewed-by: Sagar Biradar <Sagar.Biradar@microchip.com>
Signed-off-by: Sagar Biradar <Sagar.Biradar@microchip.com>
Signed-off-by: Balsundar P <balsundar.p@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When an SVC node goes down as part of a node reboot, its WWPNs are moved to
the remaining node. When the node is back online, its WWPNs are moved
back. The result is that the WWPN moves from one NPort_ID to another, then
back again. The ibmvfc driver was forcing the old port to be removed, but
not sending an implicit logout. When the WWPN showed up at the new
location, the PLOGI failed as there was already a login established for the
old scsi id. The patch below fixes this by ensuring we always send an
implicit logout for any scsi id associated with an rport prior to calling
fc_remote_port_delete.
Link: https://lore.kernel.org/r/1582767943-16611-1-git-send-email-brking@linux.vnet.ibm.com
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The current codebase makes use of the zero-length array language extension
to the C90 standard, but the preferred mechanism to declare variable-length
types such as these ones is a flexible array member[1][2], introduced in
C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning in
case the flexible array does not occur last in the structure, which will
help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by this
change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Link: https://lore.kernel.org/r/20200224161406.GA21454@embeddedor
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Although the IRQ assignment in ipmi_si driver is optional,
platform_get_irq() spews error messages unnecessarily:
ipmi_si dmi-ipmi-si.0: IRQ index 0 not found
Fix this by switching to platform_get_irq_optional().
Cc: stable@vger.kernel.org # 5.4.x
Cc: John Donnelly <john.p.donnelly@oracle.com>
Fixes: 7723f4c5ec ("driver core: platform: Add an error message to platform_get_irq*()")
Reported-and-tested-by: Patrick Vo <patrick.vo@hpe.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-Id: <20200205093146.1352-1-tiwai@suse.de>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
and also fix memory leak to iommu mapping object, which was
detected by kmemleak detector.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ymVK
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-fixes-for-v5.6-rc5-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Fix IOMMU initialization failure when Exynos DRM driver is rebound,
and also fix memory leak to iommu mapping object, which was
detected by kmemleak detector.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1583887109-4148-1-git-send-email-inki.dae@samsung.com
The support for __uint128_t is dependent on the target bit size.
GCC that defaults to the 32-bit can still build the 64-bit kernel
with -m64 flag passed.
However, $(cc-option,-D__SIZEOF_INT128__=0) is evaluated against the
default machine bit, which may not match to the kernel it is building.
Theoretically, this could be evaluated separately for 64BIT/32BIT.
config CC_HAS_INT128
bool
default !$(cc-option,$(m64-flag) -D__SIZEOF_INT128__=0) if 64BIT
default !$(cc-option,$(m32-flag) -D__SIZEOF_INT128__=0)
I simplified it more because the 32-bit compiler is unlikely to support
__uint128_t.
Fixes: c12d3362a7 ("int128: move __uint128_t compiler test to Kconfig")
Reported-by: George Spelvin <lkml@sdf.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: George Spelvin <lkml@sdf.org>
When a compiler supports multiple architectures, some compiler features
can be dependent on the target architecture.
This is typical for Clang, which supports multiple LLVM backends.
Even for GCC, we need to take care of biarch compiler cases.
It is not a problem when we evaluate cc-option in Makefiles because
cc-option is tested against the flag in question + $(KBUILD_CFLAGS).
The cc-option in Kconfig, on the other hand, does not accumulate
tested flags. Due to this simplification, it could potentially test
cc-option against a different target.
At first, Kconfig always evaluated cc-option against the host
architecture.
Since commit e8de12fb7c ("kbuild: Check for unknown options with
cc-option usage in Kconfig and clang"), in case of cross-compiling
with Clang, the target triple is correctly passed to Kconfig.
The case with biarch GCC (and native build with Clang) is still not
handled properly. We need to pass some flags to specify the target
machine bit.
Due to the design, all the macros in Kconfig are expanded in the
parse stage, where we do not know the target bit size yet.
For example, arch/x86/Kconfig allows a user to toggle CONFIG_64BIT.
If a compiler flag -foo depends on the machine bit, it must be tested
twice, one with -m32 and the other with -m64.
However, -m32/-m64 are not always recognized. So, this commits adds
m64-flag and m32-flag macros. They expand to -m32, -m64, respectively
if supported. Or, they expand to an empty string if unsupported.
The typical usage is like this:
config FOO
bool
default $(cc-option,$(m64-flag) -foo) if 64BIT
default $(cc-option,$(m32-flag) -foo)
This is clumsy, but there is no elegant way to handle this in the
current static macro expansion.
There was discussion for static functions vs dynamic functions.
The consensus was to go as far as possible with the static functions.
(https://lkml.org/lkml/2018/3/2/22)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: George Spelvin <lkml@sdf.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
The commit 2042b5486b ("kbuild: unset variables in top Makefile
instead of setting 0") renamed the variable from "config-targets"
to "config-build", the comment should be consistent accordingly.
Signed-off-by: Kaiden PK Yu (余泊鎧) <KaidenPK.Yu@moxa.com>
Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Change the config to 'tristate' and use module_platform_driver() to
allow the SC27XX poweroff driver building into a module, as well as
adding some mudule information.
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
To allow the SC27XX driver can be built as a module, and the
freeze_secondary_cpus() symbol is not exported, thus we can change
to use the exported cpu_down() API to shut down other cpus to avoid
racing, which is same as the freeze_secondary_cpus().
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
When powering off the whole system, we should power off some external
subsystems' connection firstly, otherwise some external subsystems
will hold some power and result in powering down abnormally.
Signed-off-by: Sherry Zong <sherry.zong@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
When applying the context-barrier, we only care about the current
engines, as the next set of engines will be naturally after the barrier.
So we can skip holding the ctx->engines_mutex while constructing the
request by taking a sneaky reference to the i915_gem_engines instead.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311221739.30375-2-chris@chris-wilson.co.uk
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The driver fails to probe with -EPROBE_DEFER if battery's power supply
(charger driver) isn't ready yet and this results in a bit noisy error
message in KMSG during kernel's boot up. Let's silence the harmless
error message.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The "Intel 64 and IA-32 Architectures Software Developer’s Manual Volume 4:
Model-Specific Registers" has the following table for the values from
freq_desc_byt:
000B: 083.3 MHz
001B: 100.0 MHz
010B: 133.3 MHz
011B: 116.7 MHz
100B: 080.0 MHz
Notice how for e.g the 83.3 MHz value there are 3 significant digits, which
translates to an accuracy of a 1000 ppm, where as a typical crystal
oscillator is 20 - 100 ppm, so the accuracy of the frequency format used in
the Software Developer’s Manual is not really helpful.
As far as we know Bay Trail SoCs use a 25 MHz crystal and Cherry Trail
uses a 19.2 MHz crystal, the crystal is the source clock for a root PLL
which outputs 1600 and 100 MHz. It is unclear if the root PLL outputs are
used directly by the CPU clock PLL or if there is another PLL in between.
This does not matter though, we can model the chain of PLLs as a single PLL
with a quotient equal to the quotients of all PLLs in the chain multiplied.
So we can create a simplified model of the CPU clock setup using a
reference clock of 100 MHz plus a quotient which gets us as close to the
frequency from the SDM as possible.
For the 83.3 MHz example from above this would give 100 MHz * 5 / 6 = 83
and 1/3 MHz, which matches exactly what has been measured on actual
hardware.
Use a simplified PLL model with a reference clock of 100 MHz for all Bay
and Cherry Trail models.
This has been tested on the following models:
CPU freq before: CPU freq after:
Intel N2840 2165.800 MHz 2166.667 MHz
Intel Z3736 1332.800 MHz 1333.333 MHz
Intel Z3775 1466.300 MHz 1466.667 MHz
Intel Z8350 1440.000 MHz 1440.000 MHz
Intel Z8750 1600.000 MHz 1600.000 MHz
This fixes the time drifting by about 1 second per hour (20 - 30 seconds
per day) on (some) devices which rely on the tsc_msr.c code to determine
the TSC frequency.
Reported-by: Vipul Kumar <vipulk0511@gmail.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200223140610.59612-3-hdegoede@redhat.com
According to the "Intel 64 and IA-32 Architectures Software Developer's
Manual Volume 4: Model-Specific Registers" on Cherry Trail (Airmont)
devices the 4 lowest bits of the MSR_FSB_FREQ mask indicate the bus freq
unlike on e.g. Bay Trail where only the lowest 3 bits are used.
This is also the reason why MAX_NUM_FREQS is defined as 9, since Cherry
Trail SoCs have 9 possible frequencies, so the lo value from the MSR needs
to be masked with 0x0f, not with 0x07 otherwise the 9th frequency will get
interpreted as the 1st.
Bump MAX_NUM_FREQS to 16 to avoid any possibility of addressing the array
out of bounds and makes the mask part of the cpufreq struct so it can be
set it per model.
While at it also log an error when the index points to an uninitialized
part of the freqs lookup-table.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200223140610.59612-2-hdegoede@redhat.com
Use named struct initializers for the freq_desc struct-s initialization
and change the "u8 msr_plat" to a "bool use_msr_plat" to make its meaning
more clear instead of relying on a comment to explain it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200223140610.59612-1-hdegoede@redhat.com
Modern x86 laptops are starting to use GPIO pins as interrupts more
and more, e.g. touchpads and touchscreens have almost all moved away
from PS/2 and USB to using I2C with a GPIO pin as interrupt.
Modern x86 laptops also have almost all moved to using s2idle instead
of using the system S3 ACPI power state to suspend.
The Intel and AMD pinctrl drivers do not define irq_retrigger handlers
for the irqchips they register, this is causing edge triggered interrupts
which happen while suspended using s2idle to get lost.
One specific example of this is the lid switch on some devices, lid
switches used to be handled by the embedded-controller, but now the
lid open/closed sensor is sometimes directly connected to a GPIO pin.
On most devices the ACPI code for this looks like this:
Method (_E00, ...) {
Notify (LID0, 0x80) // Status Change
}
Where _E00 is an ACPI event handler for changes on both edges of the GPIO
connected to the lid sensor, this event handler is then combined with an
_LID method which directly reads the pin. When the device is resumed by
opening the lid, the GPIO interrupt will wake the system, but because the
pinctrl irqchip doesn't have an irq_retrigger handler, the Notify will not
happen. This is not a problem in the case the _LID method directly reads
the GPIO, because the drivers/acpi/button.c code will call _LID on resume
anyways.
But some devices have an event handler for the GPIO connected to the
lid sensor which looks like this:
Method (_E00, ...) {
if (LID_GPIO == One)
LIDS = One
else
LIDS = Zero
Notify (LID0, 0x80) // Status Change
}
And the _LID method returns the cached LIDS value, since on open we
do not re-run the edge-interrupt handler when we re-enable IRQS on resume
(because of the missing irq_retrigger handler), _LID now will keep
reporting closed, as LIDS was never changed to reflect the open status,
this causes userspace to re-resume the laptop again shortly after opening
the lid.
The Intel GPIO controllers do not allow implementing irq_retrigger without
emulating it in software, at which point we are better of just using the
generic HARDIRQS_SW_RESEND mechanism rather then re-implementing software
emulation for this separately in aprox. 14 different pinctrl drivers.
Select HARDIRQS_SW_RESEND to solve the problem of edge-triggered GPIO
interrupts not being re-triggered on resume when they were triggered during
suspend (s2idle) and/or when they were the cause of the wakeup.
This requires
008f1d60fe ("x86/apic/vector: Force interupt handler invocation to irq context")
c16816acd0 ("genirq: Add protection against unsafe usage of generic_handle_irq()")
to protect the APIC based interrupts from being wreckaged by a software
resend.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200123210242.53367-1-hdegoede@redhat.com
If the cacheline may still be busy, atomically mark it for future
release, and only if we can determine that it will never be used again,
immediately free it.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1392
Fixes: ebece75392 ("drm/i915: Keep timeline HWSP allocated until idle across the system")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.2+
Link: https://patchwork.freedesktop.org/patch/msgid/20200306154647.3528345-1-chris@chris-wilson.co.uk
(cherry picked from commit 2d4bd971f5)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If we stop filling the ELSP due to an incompatible virtual engine
request, check if we should enable the timeslice on behalf of the queue.
This fixes the case where we are inspecting the last->next element when
we know that the last element is the last request in the execution queue,
and so decided we did not need to enable timeslicing despite the intent
to do so!
Fixes: 8ee36e048c ("drm/i915/execlists: Minimalistic timeslicing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306113012.3184606-1-chris@chris-wilson.co.uk
(cherry picked from commit 3df2deed41)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The alignment is u64, and yet is_power_of_2() assumes unsigned long,
which might give different results between 32b and 64b kernel.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305203534.210466-1-matthew.auld@intel.com
Cc: stable@vger.kernel.org
(cherry picked from commit 2920516b2f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Commit c3b5a8430d ("drm/i915/gvt: Enable gfx virtualiztion for CFL")
added the support on CFL. The vgpu emulation hotplug support on CFL was
supposed to be included in that patch. Without the vgpu emulation
hotplug support, the dma-buf based display gives us a blur face.
So fix this issue by adding the vgpu emulation hotplug support on CFL.
Fixes: c3b5a8430d ("drm/i915/gvt: Enable gfx virtualiztion for CFL")
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200227010041.32248-1-tina.zhang@intel.com
(cherry picked from commit 135dde8853)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Requests within a timeline are ordered by that timeline, so awaiting for
the start of a request within the timeline is a no-op. This used to work
by falling out of the mutex_trylock() as the signaler and waiter had the
same timeline and not returning an error.
Fixes: 6a79d84840 ("drm/i915: Lock signaler timeline while navigating")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305134822.2750496-1-chris@chris-wilson.co.uk
(cherry picked from commit ab7a69020f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Fix the inverted test to emit the wait on the end of the previous
request if we /haven't/ already.
Fixes: 6a79d84840 ("drm/i915: Lock signaler timeline while navigating")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305104210.2619967-1-chris@chris-wilson.co.uk
(cherry picked from commit 07e9c59d63)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
drm_dp_mst_topology_mgr_cbs.destroy_connector callbacks are identical
amongst every driver and don't do anything other than cleaning up the
connector((drm_connector_unregister()/drm_connector_put())) except for
amdgpu_dm driver where some amdgpu_dm specific code in there.
This connector cleaning up is now being handled in the drm core so
driver destroy_connector callbacks are not needed (except for
amdgpu_dm) hence remove them.
Removal is done with below sementic patch:
@r1@
identifier func, E;
@@
struct drm_dp_mst_topology_cbs E = {
...,
- .destroy_connector = func
};
@delete depends on r1@
identifier r1.func;
@@
- static void func(...){...}
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Suggested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200307083023.76498-6-pankaj.laxminarayan.bharadiya@intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
drm_dp_mst_topology_mgr_cbs.destroy_connector callbacks are identical
amongst every driver and don't do anything other than cleaning up the
connector (drm_connector_unregister()/drm_connector_put()) except for
amdgpu_dm driver where some amdgpu_dm specific code in there which I
an not sure if it should stay or not.
Create and use a helper which calls driver's destroy_connector hook if
available otherwise does cleanup internally.
This is the step towards removing identical hooks from every driver.
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Suggested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200307083023.76498-5-pankaj.laxminarayan.bharadiya@intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Now drm_dp_mst_topology_cbs.register_connector callback is not getting
used anymore hence remove it.
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Suggested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200307083023.76498-4-pankaj.laxminarayan.bharadiya@intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
drm_dp_mst_port_add_connector() directly calls the
drm_connector_register() now and
drm_dp_mst_topology_mgr_cbs.register_connector callback is not getting
called anymore.
Hence remove all drm_dp_mst_topology_mgr_cbs.register_connector
callbacks.
This is the preparatory step for removing the
drm_dp_mst_topology_mgr_cbs.register_connector callback hook.
The removal is done with below sementic patch:
@r1@
identifier func, E;
@@
struct drm_dp_mst_topology_cbs E = {
...,
- .register_connector = func
};
@delete depends on r1@
identifier r1.func;
@@
- static void func(...){...}
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Suggested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200307083023.76498-3-pankaj.laxminarayan.bharadiya@intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
drm_dp_mst_topology_mgr_cbs.register_connector callbacks are literally
identical amongst every driver and don't do anything other than
calling drm_connector_register(). Hence call drm_connector_register()
directly instead of a callback.
This is the preparatory step for removing the
drm_dp_mst_topology_mgr_cbs.register_connector callback hook.
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Suggested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200307083023.76498-2-pankaj.laxminarayan.bharadiya@intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
In this function, ftgmac100_probe() can be triggered only
if the platform_device and platform_driver matches, so the
judgement at the beginning is redundant.
Signed-off-by: tangbin <tangbin@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clang warns:
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:2860:9: warning:
converting the result of '?:' with integer constants to a boolean always
evaluates to 'true' [-Wtautological-constant-compare]
return DPAA_FD_DATA_ALIGNMENT ? ALIGN(headroom,
^
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:131:34: note: expanded
from macro 'DPAA_FD_DATA_ALIGNMENT'
\#define DPAA_FD_DATA_ALIGNMENT (fman_has_errata_a050385() ? 64 : 16)
^
1 warning generated.
This was exposed by commit 3c68b8fffb ("dpaa_eth: FMan erratum A050385
workaround") even though it appears to have been an issue since the
introductory commit 9ad1a37493 ("dpaa_eth: add support for DPAA
Ethernet") since DPAA_FD_DATA_ALIGNMENT has never been able to be zero.
Just replace the whole boolean expression with the true branch, as it is
always been true.
Link: https://github.com/ClangBuiltLinux/linux/issues/928
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a bug where if userspace is writing to encrypted files while the
FS_IOC_REMOVE_ENCRYPTION_KEY ioctl (introduced in v5.4) is running,
dirty inodes could be evicted, causing writes could be lost or the
filesystem to hang due to a use-after-free. This was encountered during
real-world use, not just theoretical.
Tested with the existing fscrypt xfstests, and with a new xfstest I
wrote to reproduce this bug. This fix does expose an existing bug with
'-o lazytime' that Ted is working on fixing, but this fix is more
critical and needed anyway regardless of the lazytime fix.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCXmk8HxQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK4YiAQC1RZyH4/mZ890Or6s8SzCgJTVmiLk9
ZTO/56XmLte6LAD+IBAExqDkkybmAF0rQ4kY1oL75f/e/nEs+50TXra9NQc=
=s2KD
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt fix from Eric Biggers:
"Fix a bug where if userspace is writing to encrypted files while the
FS_IOC_REMOVE_ENCRYPTION_KEY ioctl (introduced in v5.4) is running,
dirty inodes could be evicted, causing writes could be lost or the
filesystem to hang due to a use-after-free. This was encountered
during real-world use, not just theoretical.
Tested with the existing fscrypt xfstests, and with a new xfstest I
wrote to reproduce this bug. This fix does expose an existing bug with
'-o lazytime' that Ted is working on fixing, but this fix is more
critical and needed anyway regardless of the lazytime fix"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: don't evict dirty inodes after removing key
Those files got moved, but cross-references still point to the
wrong places.
Fixes: fcd6807271 ("Documentation: Add io-mapping.rst to driver-api manual")
Fixes: d1ce350015 ("Documentation: Add io_ordering.rst to driver-api manual")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/c0205119db4fef536272cb0a183b6c14c2c8bf4c.1583927470.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Adaptive Sync is a VESA feature so add a DRM core helper to parse
the EDID's detailed descritors to obtain the adaptive sync monitor range.
Store this info as part fo drm_display_info so it can be used
across all drivers.
This part of the code is stripped out of amdgpu's function
amdgpu_dm_update_freesync_caps() to make it generic and be used
across all DRM drivers
v6:
* Call it monitor_range (Ville)
v5:
* Use the renamed flags
v4:
* Use is_display_descriptor() (Ville)
* Name the monitor range flags (Ville)
v3:
* Remove the edid parsing restriction for just DP (Nicholas)
* Use drm_for_each_detailed_block (Ville)
* Make the drm_get_adaptive_sync_range function static (Harry, Jani)
v2:
* Change vmin and vmax to use u8 (Ville)
* Dont store pixel clock since that is just a max dotclock
and not related to VRR mode (Manasi)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
Cc: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310231651.13841-2-manasi.d.navare@intel.com
This patch adds defines for the detailed monitor
range flags as per the EDID specification.
v2:
* Rename the flags with DRM_EDID_ (Jani N)
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
Cc: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310231651.13841-1-manasi.d.navare@intel.com
This patchset from Chuanhong Guo <gch981213@gmail.com> adds a spi-mem
driver for Mediatek SPI-NOR controller, which already has limited
support by mtk-quadspi. This new driver can make use of full quadspi
capability of this controller.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl5pQmYTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0D9sB/9PBy5hYIWLJOqP3Tegy+si7eEjgYQe
32DvHZRYYL+Oc8OQMGnJYUY5grfriS300TjxeB4MNx8ajVyuaH7e2aIhgTz3oJ6a
YrygFcxEi0LmRT82HyLVxptyblMSo3A8QWOTOqe1aFvJRZjDDKvEIcGCW2RPmtxT
r/EoVVkSv4X+k3GUtYnRBrq12hL+vr1YIjZM05MVu2sDtFXLO2+wotFIODDv15zi
ByBtwhKumKawUOETzGDw4EDV5MJx9nZtswRC4x3hDrLS6au39F/MyP78gpHm8vw+
YfiS5/39rkB6j1QltcP3B9n7joxrgaFAYsLBTZUoE3IjeVTggcKCOSVX
=q5ml
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl5pQt4THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0BFqB/9jBg5bNy9mNXljELZ7RKCtbn9CThYk
NvccckUJnjaTxSccGcGEetfFtoVvM4IJ8ffiL6gBrNDgvuSbedLkboqlftRRbkE2
tvxnfjKGeiVIHXcXG0kzrVMDPPncYy+o8nQMJ8b/v+VFeLah6LCo0nT4t54LPvfZ
52Nncdr8jAnjoet7t2CX2nJrhTOPUGhC7HxbwOyu2HOOd5nWmYAdT4UZo4Vdv1g9
L1knLoZctpvCpql/mUWdOAqQbD0bD0vT3FKQaq6C6kAeE+kMWSGdPgYxyFdBEVXi
uOmaqU7lHt2bsr6TRbOpw4ON0PzQtzZ/YhW2XEPJd6uc3GWy//qEyqgO
=qoqi
-----END PGP SIGNATURE-----
Merge tag 'mtk-mtd-spi-move' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-5.7
spi: Rewrite mtk-quadspi spi-nor driver with spi-mem
This patchset from Chuanhong Guo <gch981213@gmail.com> adds a spi-mem
driver for Mediatek SPI-NOR controller, which already has limited
support by mtk-quadspi. This new driver can make use of full quadspi
capability of this controller.
This driver is superseded by the new spi-mtk-nor driver.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Acked-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20200306085052.28258-5-gch981213@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
spi-mtk-nor is a driver to replace mtk-quadspi and they have almost
the same device-tree bindings. Reuse this binding documentation and
convert it for new driver:
1. "Mediatek SoCs" -> "Mediatek ARM SoCs" because MTK MIPS SoCs
use different controllers.
2. document "interrupts" as a required property because it's
available on all SoCs with this controller and new driver takes
advantages of it. It's implemented as optional only to maintain
backward compatibility.
3. add a dummy interrupt binding in example.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Link: https://lore.kernel.org/r/20200306085052.28258-4-gch981213@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
