add blank after 'if' for armv8_deprecated_init()
to make it comply with kernel coding style.
Signed-off-by: Zheng Wei <wei.zheng@vivo.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
There is a spelling mistake in the comment, Fix it.
Signed-off-by: hankecai <hankecai@bbktel.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
commit 0c6f8a8b91 ("genirq: Remove compat code") deleted the @status
member of irq_desc, but forgot to update the comment.
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In commit
f70029bbaa ("mm, memory_hotplug: drop CONFIG_MOVABLE_NODE")
the dependency on CONFIG_MOVABLE_NODE was removed for N_MEMORY.
Before, CONFIG_HIGHMEM && !CONFIG_MOVABLE_NODE could make (N_MEMORY ==
N_NORMAL_MEMORY) be true.
After that commit, N_MEMORY cannot be equal to N_NORMAL_MEMORY. So the
conditional check in paging_init() is not needed anymore, remove it.
[ bp: Massage. ]
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Link: https://lkml.kernel.org/r/20200311011823.27740-1-bhe@redhat.com
The function name mentioned in the documentational comments mismatches
the actual one. The mismatch may make trouble for automatic documentation
generation. One of the erronous name has seen to be misused
and fixed in commit bc5ab2d29b ("drm/amdgpu: fix typo in function
sdma_v4_0_page_resume").
There is apparently no functional change in the patch.
Signed-off-by: Wang Xiayang <xywang.sjtu@sjtu.edu.cn>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Removed the common length and introduce read and write length for IOCTL
payload structure.
[mkp: fixed SoB ordering]
Link: https://lore.kernel.org/r/20200316074906.9119-7-deepak.ukey@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Viswas G <viswas.g@microchip.com>
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Added the sysfs attribute for non fatal log so that management utility can
get the non fatal dump from driver. The non-fatal error is an error
condition or abnormal behavior detected by the host, or detected and
reported by the controller to the host.The non-fatal error does not stop
the controller firmware and enables it to still respond to host requests.
A typical example of a non-fatal error is an I/O timeout or an unusual
error notification from the controller. Since the firmware is operational,
the error dump information is pushed to host memory (by firmware) upon
request from the host.
Link: https://lore.kernel.org/r/20200316074906.9119-6-deepak.ukey@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
1) Move the instance tracking down after we think the instance is good to
go. Avoids having a use-after free.
2) There are goto targets for trying to cleanup if the hw fails to
initialize, but there's some overlap depending on who thinks they own
the sub-structures.
Link: https://lore.kernel.org/r/20200316074906.9119-5-deepak.ukey@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Peter Chang <dpf@google.com>
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In pm80xx driver, the command mpi_set_phy_profile_req is sent by host
during boot to configure the phy profile such as analog setting page, rate
control page. However, the tag is not freed when its response is
received. As a result, 16 tags are missing for each HBA after boot. When
NCQ is enabled with queue depth 16, it needs at least, 15 * 16 = 240 tags
for each HBA to achieve the best performance. In current pm80xx driver with
setting CCB_MAX = 256, the total number of tags in each HBA is 255 for data
IO. Hence, without returning those tags to the pool after boot, some device
will finally be forced to non-ncq mode by ATA layer due to excessive errors
(i.e. LLDD cannot allocate tag for queued task).
Link: https://lore.kernel.org/r/20200316074906.9119-4-deepak.ukey@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: yuuzheng <yuuzheng@google.com>
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A kexec reboot causes the controller fw to assert. This assertion shows up
in two ways, the controller doesn't show up as ready and an interrupt is
waiting as soon as the handler is registered. To resolve this added below
fix:
- Split the interrupt handling setup into two parts, setup and request.
- If the controller ready register indicates not-ready, but that the not
readiness is only on the IOC units we can still try a reset to bring the
system back to the pre-reboot state.
Link: https://lore.kernel.org/r/20200316074906.9119-3-deepak.ukey@microchip.com
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Vikram Auradkar <auradkar@google.com>
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Increasing the per-request size maximum (max_sectors_kb) runs into the
per-device DMA scatter gather list limit (max_segments) for users of the io
vector system calls (eg, readv and writev). This is because the kernel
combines io vectors into DMA segments when possible, but it doesn't work
for our user because the vectors in the buffer cache get scrambled. This
change bumps the advertised max scatter gather length to 528 to cover 2M w/
x86's 4k pages and some extra for the user checksum. It trims the size of
some of the tables we don't care about and exposes all of the command slots
upstream to the SCSI layer. Also reduced the PM8001_MAX_CCB to 256 as
pm8001 driver has memory limit depend on machine capability. If we increase
the sg length, we need to trade-off it by decreasing PM8001_MAX_CCB.
PM8001_MAX_CCB = 256 does not have any influence on normal use
Link: https://lore.kernel.org/r/20200316074906.9119-2-deepak.ukey@microchip.com
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Peter Chang <dpf@google.com>
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Field bdi->io_pages added in commit 9491ae4aad ("mm: don't cap request
size based on read-ahead setting") removes unneeded split of read requests.
Stacked drivers do not call blk_queue_max_hw_sectors(). Instead they set
limits of their devices by blk_set_stacking_limits() + disk_stack_limits().
Field bio->io_pages stays zero until user set max_sectors_kb via sysfs.
This patch updates io_pages after merging limits in disk_stack_limits().
Commit c6d6e9b0f6 ("dm: do not allow readahead to limit IO size") fixed
the same problem for device-mapper devices, this one fixes MD RAIDs.
Fixes: 9491ae4aad ("mm: don't cap request size based on read-ahead setting")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Song Liu <songliubraving@fb.com>
Don't call quiesce(1) and quiesce(0) if array is already suspended,
otherwise in level_store, the array is writable after mddev_detach
in below part though the intention is to make array writable after
resume.
mddev_suspend(mddev);
mddev_detach(mddev);
...
mddev_resume(mddev);
And it also causes calltrace as follows in [1].
[48005.653834] WARNING: CPU: 1 PID: 45380 at kernel/kthread.c:510 kthread_park+0x77/0x90
[...]
[48005.653976] CPU: 1 PID: 45380 Comm: mdadm Tainted: G OE 5.4.10-arch1-1 #1
[48005.653979] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J4105-ITX, BIOS P1.40 08/06/2018
[48005.653984] RIP: 0010:kthread_park+0x77/0x90
[48005.654015] Call Trace:
[48005.654039] r5l_quiesce+0x3c/0x70 [raid456]
[48005.654052] raid5_quiesce+0x228/0x2e0 [raid456]
[48005.654073] mddev_detach+0x30/0x70 [md_mod]
[48005.654090] level_store+0x202/0x670 [md_mod]
[48005.654099] ? security_capable+0x40/0x60
[48005.654114] md_attr_store+0x7b/0xc0 [md_mod]
[48005.654123] kernfs_fop_write+0xce/0x1b0
[48005.654132] vfs_write+0xb6/0x1a0
[48005.654138] ksys_write+0x67/0xe0
[48005.654146] do_syscall_64+0x4e/0x140
[48005.654155] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[48005.654161] RIP: 0033:0x7fa0c8737497
[1]: https://bugzilla.kernel.org/show_bug.cgi?id=206161
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Since snprintf() returns the would-be-output size instead of the actual
output size, the succeeding calls may go beyond the given buffer limit.
Fix it by replacing with scnprintf().
Link: https://lore.kernel.org/r/20200315094241.9086-9-tiwai@suse.de
Cc: "James E . J . Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: Don Brace <don.brace@microsemi.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since snprintf() returns the would-be-output size instead of the actual
output size, the succeeding calls may go beyond the given buffer limit.
Fix it by replacing with scnprintf().
Link: https://lore.kernel.org/r/20200315094241.9086-8-tiwai@suse.de
Cc: "James E . J . Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Reviewed-by: Bart van Assche <bvanassche@acm.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since snprintf() returns the would-be-output size instead of the actual
output size, the succeeding calls may go beyond the given buffer limit.
Fix it by replacing with scnprintf().
Also corrected the wrongly passed limit size. The remaining buffer size
must be decremented.
Link: https://lore.kernel.org/r/20200315094241.9086-7-tiwai@suse.de
Cc: "James E . J . Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since snprintf() returns the would-be-output size instead of the actual
output size, the succeeding calls may go beyond the given buffer limit.
Fix it by replacing with scnprintf().
Link: https://lore.kernel.org/r/20200315094241.9086-6-tiwai@suse.de
Cc: "James E . J . Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: Brian King <brking@us.ibm.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since snprintf() returns the would-be-output size instead of the actual
output size, the succeeding calls may go beyond the given buffer limit.
Fix it by replacing with scnprintf().
[mkp: checkpatch fix]
Link: https://lore.kernel.org/r/20200315094241.9086-5-tiwai@suse.de
Cc: "James E . J . Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: Achim Leubner <achim_leubner@adaptec.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since snprintf() returns the would-be-output size instead of the actual
output size, the succeeding calls may go beyond the given buffer limit.
Fix it by replacing with scnprintf().
Link: https://lore.kernel.org/r/20200315094241.9086-4-tiwai@suse.de
Cc: "James E . J . Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: Satish Kharat <satishkh@cisco.com>
Cc: Sesidhar Baddela <sebaddel@cisco.com>
Cc: Karan Tilak Kumar <kartilak@cisco.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since snprintf() returns the would-be-output size instead of the actual
output size, the succeeding calls may go beyond the given buffer limit.
Fix it by replacing with scnprintf().
Link: https://lore.kernel.org/r/20200315094241.9086-3-tiwai@suse.de
Cc: "James E . J . Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: Subbu Seetharaman <subbu.seetharaman@broadcom.com>
Cc: Ketan Mukadam <ketan.mukadam@broadcom.com>
Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since snprintf() returns the would-be-output size instead of the actual
output size, the succeeding calls may go beyond the given buffer limit.
Fix it by replacing with scnprintf().
Link: https://lore.kernel.org/r/20200315094241.9086-2-tiwai@suse.de
Cc: "James E . J . Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com>
Cc: linux-scsi@vger.kernel.org
Acked-by: Balsundar P <Balsundar.P@microchip.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Now the pnp_driver name is "const char *", there are no need to cast
driver_name.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
struct pnp_driver has name set as char* instead of const char* like platform_driver, pci_driver, usb_driver, etc...
Let's unify a bit by setting name as const char*.
Furthermore, all users of this structures set name from already const
data.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Log any FC Endpoint Security errors to the kernel ring buffer with rate-
limiting.
Link: https://lore.kernel.org/r/20200312174505.51294-11-maier@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enable for explicit FCP channel FC Endpoint Security error reporting and
handle any FSF security errors according to specification. Take the
following recovery actions when a FSF_SECURITY_ERROR is reported for the
specified FSF commands:
- Open Port: Retry the command if possible
- Send FCP : Physically close the remote port and reopen
For Open Port the command status is set to error, which triggers a retry.
For Send FCP the command status is set to error and recovery is triggered
to physically reopen the remote port.
Link: https://lore.kernel.org/r/20200312174505.51294-10-maier@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Trace changes in Fibre Channel Endpoint Security capabilities of FCP
devices as well as changes in Fibre Channel Endpoint Security state of
their connections to FC remote ports as FC Endpoint Security changes with
trace level 3 in HBA DBF.
A change in FC Endpoint Security capabilities of FCP devices is traced as
response to FSF command FSF_QTCB_EXCHANGE_PORT_DATA with a trace tag of
"fsfcesa" and a WWPN of ZFCP_DBF_INVALID_WWPN = 0x0000000000000000 (see
FC-FS-4 §18 "Name_Identifier Formats", NAA field).
A change in FC Endpoint Security state of connections between FCP devices
and FC remote ports is traced as response to FSF command
FSF_QTCB_OPEN_PORT_WITH_DID with a trace tag of "fsfcesp".
Example trace record of FC Endpoint Security capability change of FCP
device formatted with zfcpdbf from s390-tools:
Timestamp : ...
Area : HBA
Subarea : 00
Level : 3
Exception : -
CPU ID : ...
Caller : 0x...
Record ID : 5 ZFCP_DBF_HBA_FCES
Tag : fsfcesa FSF FC Endpoint Security adapter
Request ID : 0x...
Request status : 0x00000010
FSF cmnd : 0x0000000e FSF_QTCB_EXCHANGE_PORT_DATA
FSF sequence no: 0x...
FSF issued : ...
FSF stat : 0x00000000 FSF_GOOD
FSF stat qual : n/a
Prot stat : n/a
Prot stat qual : n/a
Port handle : 0x00000000 none (invalid)
LUN handle : n/a
WWPN : 0x0000000000000000 ZFCP_DBF_INVALID_WWPN
FCES old : 0x00000000 old FC Endpoint Security
FCES new : 0x00000007 new FC Endpoint Security
Example trace record of FC Endpoint Security change of connection to
FC remote port formatted with zfcpdbf from s390-tools:
Timestamp : ...
Area : HBA
Subarea : 00
Level : 3
Exception : -
CPU ID : ...
Caller : 0x...
Record ID : 5 ZFCP_DBF_HBA_FCES
Tag : fsfcesp FSF FC Endpoint Security port
Request ID : 0x...
Request status : 0x00000010
FSF cmnd : 0x00000005 FSF_QTCB_OPEN_PORT_WITH_DID
FSF sequence no: 0x...
FSF issued : ...
FSF stat : 0x00000000 FSF_GOOD
FSF stat qual : n/a
Prot stat : n/a
Prot stat qual : n/a
Port handle : 0x...
WWPN : 0x500507630401120c WWPN
FCES old : 0x00000000 old FC Endpoint Security
FCES new : 0x00000004 new FC Endpoint Security
Link: https://lore.kernel.org/r/20200312174505.51294-9-maier@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Log the usage of and subsequent changes in FC Endpoint Security of
connections between FCP devices and FC remote ports to the kernel ring
buffer. Activation of FC Endpoint Security is logged as informational.
Change and deactivation are logged as warning.
No logging takes place, if FC Endpoint Security is not used (i.e. never
activated) on a connection or if it does not change during reopen of a port
(e.g. due to adapter or port recovery).
Link: https://lore.kernel.org/r/20200312174505.51294-8-maier@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add an interface to read Fibre Channel Endpoint Security information of FCP
channels and their connections to FC remote ports. It comes in the form of
new sysfs attributes that are attached to the CCW device representing the
FCP device and its zfcp port objects.
The read-only sysfs attribute "fc_security" of a CCW device representing a
FCP device shows the FC Endpoint Security capabilities of the device.
Possible values are: "unknown", "unsupported", "none", or a comma-
separated list of one or more mnemonics and/or one hexadecimal value
representing the supported FC Endpoint Security:
Authentication: Authentication supported
Encryption : Encryption supported
The read-only sysfs attribute "fc_security" of a zfcp port object shows the
FC Endpoint Security used on the connection between its parent FCP device
and the FC remote port. Possible values are: "unknown", "unsupported",
"none", or a mnemonic or hexadecimal value representing the FC Endpoint
Security used:
Authentication: Connection has been authenticated
Encryption : Connection is encrypted
Both sysfs attributes may return hexadecimal values instead of mnemonics,
if the mnemonic lookup table does not contain an entry for the FC Endpoint
Security reported by the FCP device.
Link: https://lore.kernel.org/r/20200312174505.51294-7-maier@linux.ibm.com
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce automatic variables for adapter and QTCB bottom in
zfcp_fsf_open_port_handler(). This facilitates subsequent changes to meet
the 80 character per line limit.
Link: https://lore.kernel.org/r/20200312174505.51294-6-maier@linux.ibm.com
Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When we get an unsolicited notification on local link went down,
zfcp_fsf_status_read_link_down() calls zfcp_fsf_link_down_info_eval().
This only blocks rports, and sets ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED and
ZFCP_STATUS_COMMON_ERP_FAILED. Only the fc_host port_state changes to
"Linkdown", because zfcp_scsi_get_host_port_state() is an active callback
and uses the adapter status.
Other fc_host attributes model, port_id, port_type, speed, fabric_name (and
zfcp device attributes card_version, peer_wwpn, peer_wwnn, peer_d_id) which
depend on a local link, continued to show their last known "good" value.
Only if something triggered an exchange config data, some values were
updated to their unknown equivalent via case
FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE due to local link down. Triggers for
exchange config data are adapter recovery, or reading any of the following
zfcp-specific scsi host sysfs attributes "requests", "megabytes", or
"seconds_active" in /sys/devices/css*/*.*.*/*.*.*/host*/scsi_host/host*/.
The other fc_host attributes active_fc4s and permanent_port_name continued
to show their last known "good" value. Only if something triggered an
exchange port data, some values changed. Active_fc4s became all zeros as
unknown equivalent during link down. Permanent_port_name does not depend
on a local link. But for non-NPIV FCP devices, permanent_port_name
erroneously became whatever value fc_host port_name had at that point in
time (see previous paragraph). Triggers for exchange port data are the
zfcp-specific scsi host sysfs attribute "utilization", or
[{reset,get}_fc_host_stats] write anything into "reset_statistics" or read
any of the other attributes under
/sys/devices/css*/*.*.*/*.*.*/host*/fc_host/host*/statistics/.
(cf. v4.9 commit bd77befa5b ("zfcp: fix fc_host port_type with NPIV"))
This is particularly confusing when using "lszfcp -b <fcpdevbusid> -Ha" or
dbginfo.sh which read fc_host attributes and also scsi_host attributes.
After link down, the first invocation produces (abbreviated):
Class = "fc_host"
active_fc4s = "0x00 0x00 0x01 0x00 ..."
...
fabric_name = "0x10000027f8e04c49"
...
permanent_port_name = "0xc05076e4588059c1"
port_id = "0x244800"
port_state = "Linkdown"
port_type = "NPort (fabric via point-to-point)"
...
speed = "16 Gbit"
Class = "scsi_host"
...
megabytes = "0 0"
...
requests = "0 0 0"
seconds_active = "37"
...
utilization = "0 0 0"
The second and next invocations produce (abbreviated):
Class = "fc_host"
active_fc4s = "0x00 0x00 0x00 0x00 ..."
...
fabric_name = "0x0"
...
permanent_port_name = "0x0"
port_id = "0x000000"
port_state = "Linkdown"
port_type = "Unknown"
...
speed = "unknown"
Class = "scsi_host"
...
megabytes = "0 0"
...
requests = "0 0 0"
seconds_active = "38"
...
utilization = "0 0 0"
Factor out the resetting of local link dependent fc_host attributes from
zfcp_fsf_exchange_config_data_handler() case
FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE into a new helper function
zfcp_fsf_fc_host_link_down(). All code places that detect local link down
(SRB, FSF_PROT_LINK_DOWN, xconf data/port incomplete) call
zfcp_fsf_link_down_info_eval(). Call the new helper from there. This works
because zfcp_fsf_link_down_info_eval() and thus the helper is called before
zfcp_fsf_exchange_{config,port}_evaluate().
Port_name and node_name are always valid, so never reset them.
Get the permanent_port_name from exchange port data unconditionally as it
always has a valid known good value, even during link down.
Note: Rather than hardcode in zfcp_fsf_exchange_config_evaluate(), fc_host
supported_classes could theoretically get its value from
fsf_qtcb_bottom_port.class_of_service in zfcp_fsf_exchange_port_evaluate().
When the link comes back, we get a different notification, perform adapter
recovery, and this triggers an implicit exchange config data followed by
exchange port data filling in the link dependent fc_host attributes with
known good values again.
Link: https://lore.kernel.org/r/20200312174505.51294-5-maier@linux.ibm.com
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Manufacturer, HBA model, firmware version, and hardware version. Use the
same value format as for the driver-specific attributes. Keep the
driver-specific attributes for stable user space sysfs API.
Link: https://lore.kernel.org/r/20200312174505.51294-4-maier@linux.ibm.com
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
FICON Express8S or older, as well as card features newer than FICON
Express16S+ have no certain firmware level requirement.
FICON Express16S or FICON Express16S+ have the following
minimum firmware level requirements to show a proper fabric name value:
z13 machine
FICON Express16S , MCL P08424.005 , LIC version 0x00000721
z14 machine
FICON Express16S , MCL P42611.008 , LIC version 0x10200069
FICON Express16S+ , MCL P42625.010 , LIC version 0x10300147
Otherwise, the read value is not the fabric name.
Each FCP channel of these card features might need one SAN fabric re-login
after concurrent microcode update in order to show the proper fabric name.
Possible ways to trigger a SAN fabric re-login are one of: Pull fibres
between FCP channel port and SAN switch port on either side and re-plug,
disable SAN switch port adjacent to FCP channel port and re-enable switch
port, or at Service Element toggle off all CHPIDs of FCP channel over all
LPARs and toggle CHPIDs on again. Zfcp operating subchannels (FCP devices)
on such FCP channel recovers a fabric re-login.
Initialize fabric name for any topology and have it an invalid WWPN 0x0 for
anything but fabric topology. Otherwise for e.g. point-to-point topology
one could see the initial -1 from fc_host_setup() and after a link unplug
our fabric name would turn to 0x0 (with subsequent commit ("zfcp: fix
fc_host attributes that should be unknown on local link down") and stay 0x0
on link replug. I did not initialize to 0x0 somewhere even earlier in the
code path such that it would not flap from real to 0x0 to real on e.g. an
exchange config data with fabric topology.
Link: https://lore.kernel.org/r/20200312174505.51294-3-maier@linux.ibm.com
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
v2.6.27 commit cc8c282963 ("[SCSI] zfcp: Automatically attach remote
ports") introduced zfcp automatic port scan.
Before that, the user had to use the sysfs attribute "port_add" of an FCP
device (adapter) to add and open remote (target) ports, even for the remote
peer port in point-to-point topology. That code path did a proper port open
recovery trigger taking the erp_lock.
Since above commit, a new helper function zfcp_erp_open_ptp_port()
performed an UNlocked port open recovery trigger. This can race with other
parallel recovery triggers. In zfcp_erp_action_enqueue() this could corrupt
e.g. adapter->erp_total_count or adapter->erp_ready_head.
As already found for fabric topology in v4.17 commit fa89adba19 ("scsi:
zfcp: fix infinite iteration on ERP ready list"), there was an endless loop
during tracing of rport (un)block. A subsequent v4.18 commit 9e156c54ac
("scsi: zfcp: assert that the ERP lock is held when tracing a recovery
trigger") introduced a lockdep assertion for that case.
As a side effect, that lockdep assertion now uncovered the unlocked code
path for PtP. It is from within an adapter ERP action:
zfcp_erp_strategy[1479] intentionally DROPs erp lock around
zfcp_erp_strategy_do_action()
zfcp_erp_strategy_do_action[1441] NO erp lock
zfcp_erp_adapter_strategy[876] NO erp lock
zfcp_erp_adapter_strategy_open[855] NO erp lock
zfcp_erp_adapter_strategy_open_fsf[806]NO erp lock
zfcp_erp_adapter_strat_fsf_xconf[772] erp lock only around
zfcp_erp_action_to_running(),
BUT *_not_* around
zfcp_erp_enqueue_ptp_port()
zfcp_erp_enqueue_ptp_port[728] BUG: *_not_* taking erp lock
_zfcp_erp_port_reopen[432] assumes to be called with erp lock
zfcp_erp_action_enqueue[314] assumes to be called with erp lock
zfcp_dbf_rec_trig[288] _checks_ to be called with erp lock:
lockdep_assert_held(&adapter->erp_lock);
It causes the following lockdep warning:
WARNING: CPU: 2 PID: 775 at drivers/s390/scsi/zfcp_dbf.c:288
zfcp_dbf_rec_trig+0x16a/0x188
no locks held by zfcperp0.0.17c0/775.
Fix this by using the proper locked recovery trigger helper function.
Link: https://lore.kernel.org/r/20200312174505.51294-2-maier@linux.ibm.com
Fixes: cc8c282963 ("[SCSI] zfcp: Automatically attach remote ports")
Cc: <stable@vger.kernel.org> #v2.6.27+
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A headset on the desktop like Acer N50-600 does not work, until quirk
ALC662_FIXUP_ACER_NITRO_HEADSET_MODE is applied.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200317082806.73194-3-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The L3 interconnect's memory map is from 0x0 to
0xffffffff. Out of this, System memory (SDRAM) can be
accessed from 0x80000000 to 0xffffffff (2GB)
OMAP5 does support 4GB of SDRAM but upper 2GB can only be
accessed by the MPU subsystem.
Add the dma-ranges property to reflect the physical address limit
of the L3 bus.
Cc: stable@kernel.org
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Looks like we can have the maxtouch touchscreen stop producing interrupts
if an edge interrupt is lost. This can happen easily when the SoC idles as
the gpio controller may not see any state for an edge interrupt if it
is briefly triggered when the system is idle.
Also it looks like maxtouch stops sending any further interrupts if the
interrupt is not handled. And we do have several cases of maxtouch already
configured with a level interrupt, so let's do that.
With level interrupt the gpio controller has the interrupt state visible
after idle. Note that eventually we will probably also be using the
Linux generic wakeirq configured for the controller, but that cannot be
done until the maxtouch driver supports runtime PM.
Cc: maemo-leste@lists.dyne.org
Cc: Arthur Demchenkov <spinal.by@gmail.com>
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure edma for
dm816x similar to what we have for dm814x.
Let's initially keep the legacy "ti,hwmods" peroperty, it will be
removed for all ti81xx in a later patch.
Note that as we now also start using the clkctrl clock binding on
dm816x, the board specific dts files must also have compatible
"ti,dm816". This is needed for the clkctrl clocks to probe properly,
so any out of tree dts files may need to be updated accordingly.
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.
Let's also correct the custom node name to use generic node name dma.
Cc: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.
Let's also correct the custom node name to use generic node name dma.
Cc: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.
Let's also correct the custom node name to use generic node name dma.
Cc: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.
Let's also correct the custom node name to use generic node name dma.
Cc: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.
Let's also correct the custom node name to use generic node name dma.
Cc: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data.
dts property.
Cc: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module and drop the legacy "ti,hwmods" property.
As this module is very similar to what we already have configured
and working for am33xx, let's just update the whole cpsw with a
single patch to avoid some extra churn on the dts files.
Cc: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This series of changes continues dropping legacy platform data for
omaps by updating devices to probe with ti-sysc interconnect target
module driver:
- Update omap4, omap5, am437x, and dra7 display subsystem (DSS)
to probe with device tree data only
- Update am335x, am437x and dra7 to probe EDMA to probe with
device tree data only
- Drop legacy platform data for am335x and am437x PRUSS as the
current code just keeps the devices in reset
- Drop legacy platform data for omap4 DSP and IPU as the current
code just keeps the devices in reset
- Configure am437x and dra7 PRU-ICSS to probe with device tree
data
For the dropped omap4 DSP and IPU platform data, there will be patches
coming later on to configure the accelerators using the omap remoteproc
bindings so hopefully folks can actually use these devices eventually.
-----BEGIN PGP SIGNATURE-----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=QqzI
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.7/ti-sysc-drop-pdata-signed' into ti81xx
Drop legacy platform data for omaps for v5.7
This series of changes continues dropping legacy platform data for
omaps by updating devices to probe with ti-sysc interconnect target
module driver:
- Update omap4, omap5, am437x, and dra7 display subsystem (DSS)
to probe with device tree data only
- Update am335x, am437x and dra7 to probe EDMA to probe with
device tree data only
- Drop legacy platform data for am335x and am437x PRUSS as the
current code just keeps the devices in reset
- Drop legacy platform data for omap4 DSP and IPU as the current
code just keeps the devices in reset
- Configure am437x and dra7 PRU-ICSS to probe with device tree
data
For the dropped omap4 DSP and IPU platform data, there will be patches
coming later on to configure the accelerators using the omap remoteproc
bindings so hopefully folks can actually use these devices eventually.
Introduce support for mt7663e 802.11ac 2x2:2 chipset to mt7615 driver.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
